The disadvantages of classic ring type ultrasonic motor were analyzed.To obtain large mechanical output power,a ring type standing wave ultrasonic motor using cantilever type longitudinal transducers was proposed.Ther...The disadvantages of classic ring type ultrasonic motor were analyzed.To obtain large mechanical output power,a ring type standing wave ultrasonic motor using cantilever type longitudinal transducers was proposed.There are four pairs of cantilevers on one side of the ring,and four PZT ceramics are set between each pair of cantilevers.A screw fastened the PZT ceramics and cantilevers together to form a longitudinal transducer.The bending vibration mode of the ring is excited by the stretching vibration of the PZT ceramics.Thus,linear simple harmonic motions are achieved at the particle on the teeth.And the driving force is the frictional force between rotor and stator.The working principle of the proposed motor was analyzed.The ring and the longitudinal transducer were designed with FEM.The sensitive parameters of resonant frequency of the transducer and ring could be gained with modal analysis.The longitudinal vibration modal of transducer and bending vibration modal of ring were degenerated,and the motion trajectories of nodes on the teeth were analyzed.The results of this paper could guide the development of this new type of motor.展开更多
Visible light photocatalytic redox catalysis has become a powerful tool for organic synthesis, and has opened up new avenues for the formation of challenging structural skeletons and chemical bonds. In this respect, d...Visible light photocatalytic redox catalysis has become a powerful tool for organic synthesis, and has opened up new avenues for the formation of challenging structural skeletons and chemical bonds. In this respect, diverse photocatalysts, including ruthenium(II), iridium(Ⅲ), and organic dyes, have been most commonly applied.展开更多
Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit：...Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit： nm） were nano-fabricated on the Si（100）/SiO2 substrate using magnetron sputtering deposition combined with the optical lithography, electron beam lithography （EBL） and Ar ion-beam etching techniques. The smaller NR-MTJs with the inner- and outer-diameter of around 50 and 100 nm and also their corresponding NR-MTJ arrays were nano-patterned. The tunnelling magnetoresistance （TMR ＆ R） versus driving current （I） loops for a spin-polarized current switching were measured, and the TMR ratio of around 35% at room temperature were observed. The critical values of switching current for the free Co60Fe20B20 layer relative to the reference Co6oFe2oB2o layer between parallel and anti-parallel magnetization states were between 0.50 and 0.75 mA in such NR-MTJs. It is suggested that the applicable MRAM fabrication with the density and capacity higher than 256 Mbit/inch2 even 6 Gbite/inch2 are possible using both I NR-MTJ＋1 transistor structure and current switching mechanism based on based on our fabricated 4×4 MRAM demo devices.展开更多
From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental st...From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental study has been conducted. The tested value of theefficiency of a sample set of the new-type drive in the experiment agrees with the calculated one.It shows that the new-type drive is of not merely high bearing capacity, but also quite highefficiency.展开更多
Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry</span><span style="white-space:normal;font-size:1...Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry</span><span style="white-space:normal;font-size:10pt;font-family:"">,</span><span style="white-space:normal;font-size:10pt;font-family:""> prolonged usage may cause the initiation of defects in the pipeline. These defects occur due to the formed salt deposits, chemical reaction happens between the inner surface and the transferring substance, prevailing environmental conditions, etc. These defects, if not identified earlier may lead to significant losses to the industry. In this work, an in-line inspection system utilizes the nondestructive way for analyzing the internal defects in the petrochemical pipeline. This system consists of a pipeline inspection robot having two major units namely the visual inspection unit and the power carrier unit. The visual inspection unit makes use of a ring-type laser diode and the camera. The laser diode serves as a light source for capturing good quality images of inspection. This unit is controlled by the Arduino in the power carrier unit which provides the necessary movement throughout the pipe. The inspected images captured by the camera are further processed with the aid of NI vision assistant software. After applying the processing function parameters provided by this software, the defect location can be clearly visualized with high precision. Three sets of defects are introduced in a Polylactide (PLA) pipe based on its position and angle along the circumference of the pipe. Further, this robot system serves as a real-time interactive image synchronization system for acquiring the inspected images. By comparing the actual and calculated defect size, the error percentage obtained was less than 5%.展开更多
A series of new Schiff base type macrocyclic crown ethers containing naphthalene ring were synthesized from 2,2'-di(o-formylnaphthoxy) ethyl ether or 1,2-di(o-formylnaphthoxy) ethane and four appropriate diamines....A series of new Schiff base type macrocyclic crown ethers containing naphthalene ring were synthesized from 2,2'-di(o-formylnaphthoxy) ethyl ether or 1,2-di(o-formylnaphthoxy) ethane and four appropriate diamines. The chemical structures of the new compounds were characterized by elemental analysis, infrared spectra, nuclear magnetic resonance spectra and mass spectrometry.展开更多
The ubiquitin-proteasome proteolysis pathway is responsible for the degradation of abnormal and short-lived proteins to regulate many important biochemical activities in eukaryotes. By employing affymetrix microarray ...The ubiquitin-proteasome proteolysis pathway is responsible for the degradation of abnormal and short-lived proteins to regulate many important biochemical activities in eukaryotes. By employing affymetrix microarray analysis, we have identified a novel ubiquitin ligase E3 gene GhRING2 that is differentially expressed between two Gossypium hirsutum lines-Texas Marker-1 (TM-1) and Chromosome Substitution Line CS-B25. The CS-B25 line has chromosome 25 from G. barbadense substituted into TM-1. The complete nucleotide sequences of GhRING2 along with its 5’-flanking region were obtained by genomic walking. GhRING2 was highly expressed in elongating fiber, and GUS expression directed by the GhRING2 promoter was found in hypocotyls and young stems of transgenic Arabidopsis plants. Using a yeast two-hybrid assay GhRING2 was found to interact with a PROTODERMAL FACTOR1 (GhPDF1) protein. GhPDF1 was expressed preferentially in immature ovules and fiber initials, and the GhPDF1 gene had been suggested to play a role in cell fate determination and fiber development. Pull down and plasmid swap assays further confirmed the interaction between GhRING2 and GhPDF1. The expression and protein interaction data indicate that GhRING2 may be involved in the turnover of GhPDF1 and participation in the transition from initiation to elongation stages during fiber development. Our data strongly suggest that the ubiquitin-proteasome pathway may regulate cotton fiber growth and development. The nucleotide sequence data of GhRING2 in this article have been submitted to the Gen Bank Nucleotide Sequence Data Bases under the accession number BankIt 1,742,008 SeqKM 108,000.展开更多
Introduction: Diffuse variant of GC is composed of gastric-type mucous cells, which generally do not form glands, but rather permit the mucosa and wall as scattered individual cells or small clusters in an “infiltrat...Introduction: Diffuse variant of GC is composed of gastric-type mucous cells, which generally do not form glands, but rather permit the mucosa and wall as scattered individual cells or small clusters in an “infiltrative” growth pattern. These cells appear to arise from the middle layer of the mucosa, and the presence of intestinal metaplasia is not a prerequisite. In this version, mucin formation expands the malignant cells and pushes the nucleus to the periphery, creating a “signet ring” conformation. If the signetring cells are more than 50% of the tumor, the tumor is classified as signetring cell carcinoma [1]. This case is important for reporting because we encountered for the first time such a carcinoma type, due to the new age and its atypical presentation. Case Presentation: We report a case of a 20 years Albanian old patient with Signet Ring Cell Type of Gastric CA. The patient was brought at the urgency with severe abdominal pain, nausea and peritoneal irritation. Clinical examination has been made in emergency, where we conclude the signs of peritoneal irritation, from native Ro no signs of pneumoperitoneum, while laboratory tests found a slight anemia (erythrocytes 3.36, HCT 25, HGB 8.6). Two hours later we repeated the native RTG and there were present the signs of pneumoperitoneum. It was indicated urgent surgical in-tervention. Intraoperatively, we found Ulcer duodenal perforation and?undertook the operation procedures by Roscoe Graham technique. Conclusions: At this age, it is rare, and it is difficult to detect in its early stages, because the signs and symptoms are often non-existent, non-specific, or mimic as an ulcer. The most common symptoms are early heartburn indigestion, abdominal pain or discomfort, vomiting, constipation, diarrhea or to feel of filling after a small meal, loss of appetite, weakness and fatigue. Less common symptoms are anemia and weight loss.展开更多
Two kinds of 1,4-anhydroribose derivatives,1,4-anhydro-2,3-O-benzylidene-T-D-ribopyranose(ABRP)and 1,4-anhydro-2,3-O-isopropylidene-T-D-ribopyranose(AIRP)were prepared fromD-ribose.The ringopening copolymerizations of...Two kinds of 1,4-anhydroribose derivatives,1,4-anhydro-2,3-O-benzylidene-T-D-ribopyranose(ABRP)and 1,4-anhydro-2,3-O-isopropylidene-T-D-ribopyranose(AIRP)were prepared fromD-ribose.The ringopening copolymerizations of ABRP and AIRP in various feed ratios were carried out with SbCl_5 and BF_3OEt_2 as catalyst at low temperatures.The copolymer structure was characterized by means of ^(1)H,^(13)C NMR spectroscopy and specific rotation.When SbCl_(5)was used as catalyst,the copolymer obtained had completely 1,4-β-pyranosidic structure,i.e.,cellulosetype structure.However,when BF_(3)OEt_2 was used as catalyst,the copolymer had a mixed structure of furanosidic and pyranosidic units.展开更多
From the self-assembly of the typical Salen-type Schiff-base ligand H2L and Zn（OAc）2.2H20 in the molar ratio of 1：1 or 1：2, the mononuclear [Zn（L）（H2O）] （1） or binuclear [Zn2（L）（OAc）2（H2O）] （2） are o...From the self-assembly of the typical Salen-type Schiff-base ligand H2L and Zn（OAc）2.2H20 in the molar ratio of 1：1 or 1：2, the mononuclear [Zn（L）（H2O）] （1） or binuclear [Zn2（L）（OAc）2（H2O）] （2） are obtained, respectively. For both complexes 1 and 2, the unsaturated five-coordinate coordination environment to the catalytic active centers （Zn2＋ ions） permits the monomer insertion for the effective solution copolymerization of cyclohexene oxide and maleic anhydride. All the solution copolymerizations afford poly（ester-co-ether）s, while lower catalyst and co-catalyst concentrations are helpful for the formation of alternating polyester. Of the three co-catalysts, 4-（dimethylamino）pyridine is found to be the most efficient, while an excess thereof is detrimental for chain growth of the copolymers.展开更多
基金Sponsored by the National Natural Science Foundation of China (Grant No.50875057)the State Key Laboratory of Robotics and Systems (HIT No.SKLRS200901A04)
文摘The disadvantages of classic ring type ultrasonic motor were analyzed.To obtain large mechanical output power,a ring type standing wave ultrasonic motor using cantilever type longitudinal transducers was proposed.There are four pairs of cantilevers on one side of the ring,and four PZT ceramics are set between each pair of cantilevers.A screw fastened the PZT ceramics and cantilevers together to form a longitudinal transducer.The bending vibration mode of the ring is excited by the stretching vibration of the PZT ceramics.Thus,linear simple harmonic motions are achieved at the particle on the teeth.And the driving force is the frictional force between rotor and stator.The working principle of the proposed motor was analyzed.The ring and the longitudinal transducer were designed with FEM.The sensitive parameters of resonant frequency of the transducer and ring could be gained with modal analysis.The longitudinal vibration modal of transducer and bending vibration modal of ring were degenerated,and the motion trajectories of nodes on the teeth were analyzed.The results of this paper could guide the development of this new type of motor.
文摘Visible light photocatalytic redox catalysis has become a powerful tool for organic synthesis, and has opened up new avenues for the formation of challenging structural skeletons and chemical bonds. In this respect, diverse photocatalysts, including ruthenium(II), iridium(Ⅲ), and organic dyes, have been most commonly applied.
基金the State Key Project of Fundamental Research of Ministry of Science and Technology （No. 2006CB932200） the National Natural Science Foundation of China （NSFC, No. 10574156）+2 种基金 the Knowledge Innovation Program of Chinese Aca.demy of Sciencesthe protial support of 0utstanding Young Researcher Foundation （Nos. 50325104 and 50528101） K.C.Wong Education Foundation, Hong Kong.
文摘Nano-ring-type magnetic tunnel junctions （NR-MTJs） with the layer structure of Ta（5）/Ir22Mn78（10）/ Co75Fe25（2）/Ru（0.75）/CoooFe20B20（3）/Al（0.6）-oxide/Co60Fe20B20（2.5）/Ta（3）/Ru（5） （thickness unit： nm） were nano-fabricated on the Si（100）/SiO2 substrate using magnetron sputtering deposition combined with the optical lithography, electron beam lithography （EBL） and Ar ion-beam etching techniques. The smaller NR-MTJs with the inner- and outer-diameter of around 50 and 100 nm and also their corresponding NR-MTJ arrays were nano-patterned. The tunnelling magnetoresistance （TMR ＆ R） versus driving current （I） loops for a spin-polarized current switching were measured, and the TMR ratio of around 35% at room temperature were observed. The critical values of switching current for the free Co60Fe20B20 layer relative to the reference Co6oFe2oB2o layer between parallel and anti-parallel magnetization states were between 0.50 and 0.75 mA in such NR-MTJs. It is suggested that the applicable MRAM fabrication with the density and capacity higher than 256 Mbit/inch2 even 6 Gbite/inch2 are possible using both I NR-MTJ＋1 transistor structure and current switching mechanism based on based on our fabricated 4×4 MRAM demo devices.
基金This project is supported by National Natural Science Foundation of China (No.50175011).
文摘From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental study has been conducted. The tested value of theefficiency of a sample set of the new-type drive in the experiment agrees with the calculated one.It shows that the new-type drive is of not merely high bearing capacity, but also quite highefficiency.
文摘Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry</span><span style="white-space:normal;font-size:10pt;font-family:"">,</span><span style="white-space:normal;font-size:10pt;font-family:""> prolonged usage may cause the initiation of defects in the pipeline. These defects occur due to the formed salt deposits, chemical reaction happens between the inner surface and the transferring substance, prevailing environmental conditions, etc. These defects, if not identified earlier may lead to significant losses to the industry. In this work, an in-line inspection system utilizes the nondestructive way for analyzing the internal defects in the petrochemical pipeline. This system consists of a pipeline inspection robot having two major units namely the visual inspection unit and the power carrier unit. The visual inspection unit makes use of a ring-type laser diode and the camera. The laser diode serves as a light source for capturing good quality images of inspection. This unit is controlled by the Arduino in the power carrier unit which provides the necessary movement throughout the pipe. The inspected images captured by the camera are further processed with the aid of NI vision assistant software. After applying the processing function parameters provided by this software, the defect location can be clearly visualized with high precision. Three sets of defects are introduced in a Polylactide (PLA) pipe based on its position and angle along the circumference of the pipe. Further, this robot system serves as a real-time interactive image synchronization system for acquiring the inspected images. By comparing the actual and calculated defect size, the error percentage obtained was less than 5%.
文摘A series of new Schiff base type macrocyclic crown ethers containing naphthalene ring were synthesized from 2,2'-di(o-formylnaphthoxy) ethyl ether or 1,2-di(o-formylnaphthoxy) ethane and four appropriate diamines. The chemical structures of the new compounds were characterized by elemental analysis, infrared spectra, nuclear magnetic resonance spectra and mass spectrometry.
文摘The ubiquitin-proteasome proteolysis pathway is responsible for the degradation of abnormal and short-lived proteins to regulate many important biochemical activities in eukaryotes. By employing affymetrix microarray analysis, we have identified a novel ubiquitin ligase E3 gene GhRING2 that is differentially expressed between two Gossypium hirsutum lines-Texas Marker-1 (TM-1) and Chromosome Substitution Line CS-B25. The CS-B25 line has chromosome 25 from G. barbadense substituted into TM-1. The complete nucleotide sequences of GhRING2 along with its 5’-flanking region were obtained by genomic walking. GhRING2 was highly expressed in elongating fiber, and GUS expression directed by the GhRING2 promoter was found in hypocotyls and young stems of transgenic Arabidopsis plants. Using a yeast two-hybrid assay GhRING2 was found to interact with a PROTODERMAL FACTOR1 (GhPDF1) protein. GhPDF1 was expressed preferentially in immature ovules and fiber initials, and the GhPDF1 gene had been suggested to play a role in cell fate determination and fiber development. Pull down and plasmid swap assays further confirmed the interaction between GhRING2 and GhPDF1. The expression and protein interaction data indicate that GhRING2 may be involved in the turnover of GhPDF1 and participation in the transition from initiation to elongation stages during fiber development. Our data strongly suggest that the ubiquitin-proteasome pathway may regulate cotton fiber growth and development. The nucleotide sequence data of GhRING2 in this article have been submitted to the Gen Bank Nucleotide Sequence Data Bases under the accession number BankIt 1,742,008 SeqKM 108,000.
文摘Introduction: Diffuse variant of GC is composed of gastric-type mucous cells, which generally do not form glands, but rather permit the mucosa and wall as scattered individual cells or small clusters in an “infiltrative” growth pattern. These cells appear to arise from the middle layer of the mucosa, and the presence of intestinal metaplasia is not a prerequisite. In this version, mucin formation expands the malignant cells and pushes the nucleus to the periphery, creating a “signet ring” conformation. If the signetring cells are more than 50% of the tumor, the tumor is classified as signetring cell carcinoma [1]. This case is important for reporting because we encountered for the first time such a carcinoma type, due to the new age and its atypical presentation. Case Presentation: We report a case of a 20 years Albanian old patient with Signet Ring Cell Type of Gastric CA. The patient was brought at the urgency with severe abdominal pain, nausea and peritoneal irritation. Clinical examination has been made in emergency, where we conclude the signs of peritoneal irritation, from native Ro no signs of pneumoperitoneum, while laboratory tests found a slight anemia (erythrocytes 3.36, HCT 25, HGB 8.6). Two hours later we repeated the native RTG and there were present the signs of pneumoperitoneum. It was indicated urgent surgical in-tervention. Intraoperatively, we found Ulcer duodenal perforation and?undertook the operation procedures by Roscoe Graham technique. Conclusions: At this age, it is rare, and it is difficult to detect in its early stages, because the signs and symptoms are often non-existent, non-specific, or mimic as an ulcer. The most common symptoms are early heartburn indigestion, abdominal pain or discomfort, vomiting, constipation, diarrhea or to feel of filling after a small meal, loss of appetite, weakness and fatigue. Less common symptoms are anemia and weight loss.
文摘Two kinds of 1,4-anhydroribose derivatives,1,4-anhydro-2,3-O-benzylidene-T-D-ribopyranose(ABRP)and 1,4-anhydro-2,3-O-isopropylidene-T-D-ribopyranose(AIRP)were prepared fromD-ribose.The ringopening copolymerizations of ABRP and AIRP in various feed ratios were carried out with SbCl_5 and BF_3OEt_2 as catalyst at low temperatures.The copolymer structure was characterized by means of ^(1)H,^(13)C NMR spectroscopy and specific rotation.When SbCl_(5)was used as catalyst,the copolymer obtained had completely 1,4-β-pyranosidic structure,i.e.,cellulosetype structure.However,when BF_(3)OEt_2 was used as catalyst,the copolymer had a mixed structure of furanosidic and pyranosidic units.
基金financially supported by the National Natural Science Foundation of China(Nos.91222201,21173165 and 20871098)the Program for New Century Excellent Talents in Universities from the Ministry of Education of China(No.NCET-10-0936)+4 种基金the State Key Laboratory of Structure Chemistry(20100014)the Provincial Natural Foundation(2011JQ2011) of Shaanxithe Education Committee Foundation of Shaanxi Province(11JK0588,12JK0577)Graduate Innovation and Creativity Fund(YZZ12038) of Northwest UniversityHong Kong Research Grants Council(HKBU 202407 and FRG/06-07/II-16)
文摘From the self-assembly of the typical Salen-type Schiff-base ligand H2L and Zn（OAc）2.2H20 in the molar ratio of 1：1 or 1：2, the mononuclear [Zn（L）（H2O）] （1） or binuclear [Zn2（L）（OAc）2（H2O）] （2） are obtained, respectively. For both complexes 1 and 2, the unsaturated five-coordinate coordination environment to the catalytic active centers （Zn2＋ ions） permits the monomer insertion for the effective solution copolymerization of cyclohexene oxide and maleic anhydride. All the solution copolymerizations afford poly（ester-co-ether）s, while lower catalyst and co-catalyst concentrations are helpful for the formation of alternating polyester. Of the three co-catalysts, 4-（dimethylamino）pyridine is found to be the most efficient, while an excess thereof is detrimental for chain growth of the copolymers.
