AIM:To compare relative peripheral refractive errors(RPREs)in Chinese children with and without myopic anisometropia(MAI)and to explore the relationship between RPRE and myopia.METHODS:This observational cross-section...AIM:To compare relative peripheral refractive errors(RPREs)in Chinese children with and without myopic anisometropia(MAI)and to explore the relationship between RPRE and myopia.METHODS:This observational cross-sectional study included 160 children divided into two groups according to the interocular spherical equivalent refraction(SER)difference≥1.0 D in the MAI group(n=80)and<1.0 D in the non-MAI group(n=80).The MAI group was further divided into two subgroups:ΔSER<2.0 D group and ΔSER≥2.0 D group.Basic ocular biometric parameters of axial length(AL),average keratometry(Ave K),cylinder(CYL),surface regularity index(SRI),and surface asymmetry index(SAI)were recorded.In addition,multispectral refraction topography was performed to measure RPRE,and the parameters were recorded as total refraction difference value(TRDV),refraction difference value(RDV)0-10,RDV10-20,RDV20-30,RDV30-40,RDV40-53,RDV-superior(RDV-S),RDV-inferior(RDV-I),RDV-temporal(RDV-T)and RDV-nasal(RDV-N).RESULTS:In the non-MAI group,the interocular differences of all parameters of RPRE were not significant.In the MAI group,the interocular differences of TRDV,RDV10-53,RDV-S,RDV-I,RDV-T,and RDV-N were significant.In subgroup analysis,the interocular differences of TRDV,RDV30-53,RDV-I,and RDV-T were significant in ΔSER<2.0 D group and ΔSER≥2.0 D group,but the interocular differences of RDV10-30,RDV-S and RDV-N were only significant in the ΔSER≥2.0 D group.In correlation analysis,ΔTRDV,ΔRDV 10-53,ΔRDV-S,and ΔRDV-N were negatively correlated with ΔSER but positively correlated with ΔAL.CONCLUSION:The more myopic eyes have larger hyperopic RPRE in Chinese children with MAI in certain retinal range,and partialΔRPRE is closely associated with ΔSER and ΔAL.展开更多
The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual...The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual links, following a fixed(pre-defined) order of link selection. The right(left)hand motor imagery is used to turn a link clockwise(counterclockwise) and foot imagery is used to move a link forward. The occurrence of ErrP here indicates that the link under motion crosses the visually fixed target position, which usually is a plane/line/point depending on the desired transition of the link across 3D planes/around 2D lines/along 2D lines respectively. The imagined task about individual link's movement is decoded by a classifier into three possible class labels: clockwise, counterclockwise and no movement in case of rotational movements and forward, backward and no movement in case of translational movements. One additional classifier is required to detect the occurrence of the ErrP signal, elicited due to visually inspired positional link error with reference to a geometrically selected target position. Wavelet coefficients and adaptive autoregressive parameters are extracted as features for motor imagery and ErrP signals respectively. Support vector machine classifiers are used to decode motor imagination and ErrP with high classification accuracy above 80%. The average time taken by the proposed scheme to decode and execute control intentions for the complete movement of three links of a robot is approximately33 seconds. The steady-state error and peak overshoot of the proposed controller are experimentally obtained as 1.1% and4.6% respectively.展开更多
As the current calculation methods for wellbore separation factor have some deficiencies, we propose and analyze a new calculation approach for wellbore separation factor based on the relative position of adjacent wel...As the current calculation methods for wellbore separation factor have some deficiencies, we propose and analyze a new calculation approach for wellbore separation factor based on the relative position of adjacent wellbores, named as relative position method for short. Based on the trajectory error ellipsoid model of single wellbore, the error ellipsoids model of adjacent wellbore was derived considering the correlation of trajectory errors between adjacent wells. Furthermore, the calculation formula of the separation factor based on relative position of adjacent wellbore was derived and solved with the conjugate gradient algorithm. Case study shows that the new approach is more precise and higher in applicability than the ellipsoid scaling method and the minimum distance method, it can evaluate the state of well collision more reasonably. By doing batch calculation with the new method and following the criterion of well collision avoidance, the permissible ranges of key parameters in the well design can be worked out quickly. This method has good application in the design of cluster wells and directional wells.展开更多
To reduce the spatial simulation error generated by the finite difference method,previous researchers compute the optimal finite-difference weights always by minimizing the error of spatial dispersion relation.However...To reduce the spatial simulation error generated by the finite difference method,previous researchers compute the optimal finite-difference weights always by minimizing the error of spatial dispersion relation.However,we prove that the spatial simulation error of the finite difference method is associated with the dot product of the spatial dispersion relation of the finite-difference weights and the spectrum of the seismic wavefield.Based on the dot product relation,we construct a L_(2) norm cost function to minimize spatial simulation error.For solving this optimization problem,the seismic wavefield infor-mation in wavenumber region is necessary.Nevertheless,the seismic wavefield is generally obtained by costly forward modeling techniques.To reduce the computational cost,we substitute the spectrum of the seismic wavelet for the spectrum of the seismic wavefield,as the seismic wavelet plays a key role in determining the seismic wavefield.In solving the optimization problem,we design an exhaustive search method to obtain the solution of the L_(2) norm optimization problem.After solving the optimization problem,we are able to achieve the finite-difference weights that minimize spatial simulation error.In theoretical error analyses,the finite-difference weights from the proposed method can output more accurate simulation results compared to those from previous optimization algorithms.Furthermore,we validate our method through numerical tests with synthetic models,which encompass homogenous/inhomogeneous media as well as isotropic and anisotropic media.展开更多
We consider the partially linear multiplicative model with monotonic constraint for the analysis of positive response data. We propose a constrained least product relative error (LPRE) estimation procedure for the mod...We consider the partially linear multiplicative model with monotonic constraint for the analysis of positive response data. We propose a constrained least product relative error (LPRE) estimation procedure for the model by means of B-spline basis expansion. We have also established asymptotic properties of the proposed estimators under regularity conditions. We finally provide numerical simulations and a real data application to assess the finite sample performance of the developed methodology.展开更多
Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network mode...Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network model and measured data,a 3-D fracture network dynamic modeling method based on error analysis was proposed.Firstly,errors of four fracture volume density estimation methods(proposed by ODA,KULATILAKE,MAULDON,and SONG)and that of four fracture size estimation methods(proposed by EINSTEIN,SONG and TONON)were respectively compared,and the optimal methods were determined.Additionally,error index representing the deviation between fracture network model and measured data was established with integrated use of fractal dimension and relative absolute error(RAE).On this basis,the downhill simplex method was used to build the dynamic modeling method,which takes the minimum of error index as objective function and dynamically adjusts the fracture density and size parameters to correct the error index.Finally,the 3-D fracture network model could be obtained which meets the requirements.The proposed method was applied for 3-D fractures simulation in Miao Wei hydropower project in China for feasibility verification and the error index reduced from 2.618 to 0.337.展开更多
In the X-C linkage grinding of non-circular parts,the computation and control method of contour error in polar coordinates platform is different with that in the XY coordinates platform.To solve this problem,the analy...In the X-C linkage grinding of non-circular parts,the computation and control method of contour error in polar coordinates platform is different with that in the XY coordinates platform.To solve this problem,the analysis of the definition and computation methods for contour error and track error in polar coordinates platform will be made.Through the relative lead-lag relation of the linkage axes in the grinding process,the range of the estimation contour error is narrowed and a contour error calculation model is constructed.Then the contour compensation controllers along contour error direction and trajectory tracking error direction are designed respectively,and the error compensation decoupling matrix of the X-C linkage axes is given as well.In the end of this paper,we take the machining of the cylinder contour in Wankel rotary piston engine as an example.A simulation experiment of contour error compensation control based on relative lead-lag quantity is made.The result shows that the designed contour compensation controller can increase the contour machining accuracy effectively.展开更多
This paper describes the geometric and statistical properties of areal object under randomness. In order to describe formally such a uncertain topological relation, a new formal model (i.e. 4ID model) is proposed. On ...This paper describes the geometric and statistical properties of areal object under randomness. In order to describe formally such a uncertain topological relation, a new formal model (i.e. 4ID model) is proposed. On the basis of this, the effects of positional uncertainty on topological relations between areal objects are investigated in detail. Some possibility functions for the determination of relations are constructed based on the assumption that randomness of point location complies with a normal distribution, and the concept of uncertain sets of topological relations under randomness is introduced.展开更多
Workflow system has become a standard solution for managing a complex business process.How to guarantee its correctness is a key requirement.Many methods only focus on the control-flow verification,while they neglect ...Workflow system has become a standard solution for managing a complex business process.How to guarantee its correctness is a key requirement.Many methods only focus on the control-flow verification,while they neglect the modeling and checking of data-flows.Although some studies are presented to repair the data-flow errors,they do not consider the effect of delete operations or weak circulation relations on the repairing results.What’s more,repairing some data-flow errors may bring in new errors.In order to solve these problems,we use workflow net with data(WFD-net)systems to model and analyze a workflow system.Based on weak behavioral relations and order relations in a WFD-net system,we formalize four kinds of data-flow errors.After then,we reveal the relations between these errors and organize them into a hierarchy.Furthermore,we propose some new methods to repair data-flow errors in a WFD-net system based on system requirements and repair strategies.Finally,a case study of campus-card recharging shows the applicability of our methods,and a group of experiments show their advantages and effectiveness.展开更多
<div style="text-align:justify;"> According to the problem that the low measurement accuracy of TH-1 satellite star sensor, the low frequency and “slow drift” error which cannot be ignored in the att...<div style="text-align:justify;"> According to the problem that the low measurement accuracy of TH-1 satellite star sensor, the low frequency and “slow drift” error which cannot be ignored in the attitude determination system, resulting in obvious random error in the horizontal position and elevation direction, and the change of the error with time and latitude, cannot be calibrated by the ground field of the real problem. In this paper, a low frequency detection model is established by using the principle of relative orientation, and the low frequency error is obtained by parallax elimination. Finally, the satellite attitude is compensated and the more accurate exterior orientation elements are obtained, thus improving the positioning accuracy and stability. The experimental results show that: the proposed methods are feasible, and by using the model to dynamically calibrate the exterior orientation angle elements on orbit, the plane and elevation errors of the ground points can be basically eliminated. The global uncontrollable positioning accuracy and stability of the photogrammetry satellite are improved. </div>展开更多
The Dynamic relation mechanism between ZCE cotton futures price and related listed company stock price has been studied based on the metastock historical data in January 1st,2007 to September 1st,2010,Johansen co-inte...The Dynamic relation mechanism between ZCE cotton futures price and related listed company stock price has been studied based on the metastock historical data in January 1st,2007 to September 1st,2010,Johansen co-integration analysis,Vector error correction model,Granger causality test and variance decomposition method.The results indicated that:long-term equilibrium relationship existed between ZCE cotton futures price and Xinsai share stock price while which changed in the same tendency and speed in the long-term.Cotton futures price is the main reason for the changing of Xinsai share stock price.The lead-lag relationship in changing course had been confirmed that existed between ZCE cotton futures price and the Xinsai share stock price.Meanwhile,the forward pass mechanism of price changing information had been found only from the ZCE cotton futures market to the stock market while showing asymmetry.Conclusions of the study can be used for cotton and related corporate to hedge business risks by the cotton price changes.展开更多
In this work we used the Gaussian plume model to calculate the actual maximum ground level concentration (MGLC) of air pollutant and its downwind location by using different systems of dispersion parameters and for di...In this work we used the Gaussian plume model to calculate the actual maximum ground level concentration (MGLC) of air pollutant and its downwind location by using different systems of dispersion parameters and for different stack heights. An approximate formula for the prediction of downwind position that produces the MGLC of a pollutant based on the Gaussian formula was derived for different diffusion parameters. The derived formula was used to calculate the approximate MGLC. The actual and estimated values are presented in tables. The comparison between the actual and estimated values was investigated through the calculation of the relative errors. The values of the relative errors between the actual and estimated MGLC lie in the range from: 0 to 70.2 and 0 to 1.6 for Pasquill Gifford system and Klug system respectively. The errors between the actual and estimated location of the MGLC lies in the range from: 0.2 to 227 and 0.7 to 9.4 for Pasquill Gifford system and Klug system respectively.展开更多
Clinical decision support(CDS) systems with automated alerts integrated into electronic medical records demonstrate efficacy for detecting medication errors(ME) and adverse drug events(ADEs). Critically ill patients a...Clinical decision support(CDS) systems with automated alerts integrated into electronic medical records demonstrate efficacy for detecting medication errors(ME) and adverse drug events(ADEs). Critically ill patients are at increased risk for ME, ADEs and serious negative outcomes related to these events. Capitalizing on CDS to detect ME and prevent adverse drug related events has the potential to improve patient outcomes. The key to an effective medication safety surveillance system incorporating CDS is advancing the signals for alerts by using trajectory analyses to predict clinical events, instead of waiting for these events to occur. Additionally, incorporating cutting-edge biomarkers into alert knowledge in an effort to identify the need to adjust medication therapy portending harm will advance the current state of CDS. CDS can be taken a step further to identify drug related physiological events, which are less commonly included in surveillance systems. Predictive models for adverse events that combine patient factors with laboratory values and biomarkers are being established and these models can be the foundation for individualized CDS alerts to prevent impending ADEs.展开更多
In this article, we consider the varying coefficient multiplicative regression model, which is very useful to model the positive response. The criterion of least product relative error(LPRE) is extended to the varying...In this article, we consider the varying coefficient multiplicative regression model, which is very useful to model the positive response. The criterion of least product relative error(LPRE) is extended to the varying coefficient multiplicative regression model by kernel smoothing techniques. Consistency and asymptotic normality of the proposed estimator are established. Some numerical simulations are carried out to assess the performance of the proposed estimator. As an illustration, the ethanol data is analyzed.展开更多
As an alternative to absolute error methods, such as the least square and least absolute deviation estimations, a product relative error estimation is proposed for a multiplicative single index regression model. Regre...As an alternative to absolute error methods, such as the least square and least absolute deviation estimations, a product relative error estimation is proposed for a multiplicative single index regression model. Regression coefficients in the model are estimated via a two-stage procedure and their statistical properties such as consistency and normality are studied. Numerical studies including simulation and a body fat example show that the proposed method performs well.展开更多
Relative error rather than the error itself is of the main interest in many practical applications. Criteria based on minimizing the sum of absolute relative errors （MRE） and the sum of squared relative errors （RLS...Relative error rather than the error itself is of the main interest in many practical applications. Criteria based on minimizing the sum of absolute relative errors （MRE） and the sum of squared relative errors （RLS） were proposed in the different areas. Motivated by K. Chen et al.＇s recent work [J. Amer. Statist. Assoc., 2010, 105： 1104-1112] on the least absolute relative error （LARE） estimation for the accelerated failure time （AFT） model, in this paper, we establish the connection between relative error estimators and the M-estimation in the linear model. This connection allows us to deduce the asymptotic properties of many relative error estimators （e.g., LARE） by the well-developed M-estimation theories. On the other hand, the asymptotic properties of some important estimators （e.g., MRE and RLS） cannot be established directly. In this paper, we propose a general relative error criterion （GREC） for estimating the unknown parameter in the AFT model. Then we develop the approaches to deal with the asymptotic normalities for M-estimators with differentiable loss functions on R or R／{0} in the linear model. The simulation studies are conducted to evaluate the performance of the proposed estimates for the different scenarios. Illustration with a real data example is also provided.展开更多
文摘AIM:To compare relative peripheral refractive errors(RPREs)in Chinese children with and without myopic anisometropia(MAI)and to explore the relationship between RPRE and myopia.METHODS:This observational cross-sectional study included 160 children divided into two groups according to the interocular spherical equivalent refraction(SER)difference≥1.0 D in the MAI group(n=80)and<1.0 D in the non-MAI group(n=80).The MAI group was further divided into two subgroups:ΔSER<2.0 D group and ΔSER≥2.0 D group.Basic ocular biometric parameters of axial length(AL),average keratometry(Ave K),cylinder(CYL),surface regularity index(SRI),and surface asymmetry index(SAI)were recorded.In addition,multispectral refraction topography was performed to measure RPRE,and the parameters were recorded as total refraction difference value(TRDV),refraction difference value(RDV)0-10,RDV10-20,RDV20-30,RDV30-40,RDV40-53,RDV-superior(RDV-S),RDV-inferior(RDV-I),RDV-temporal(RDV-T)and RDV-nasal(RDV-N).RESULTS:In the non-MAI group,the interocular differences of all parameters of RPRE were not significant.In the MAI group,the interocular differences of TRDV,RDV10-53,RDV-S,RDV-I,RDV-T,and RDV-N were significant.In subgroup analysis,the interocular differences of TRDV,RDV30-53,RDV-I,and RDV-T were significant in ΔSER<2.0 D group and ΔSER≥2.0 D group,but the interocular differences of RDV10-30,RDV-S and RDV-N were only significant in the ΔSER≥2.0 D group.In correlation analysis,ΔTRDV,ΔRDV 10-53,ΔRDV-S,and ΔRDV-N were negatively correlated with ΔSER but positively correlated with ΔAL.CONCLUSION:The more myopic eyes have larger hyperopic RPRE in Chinese children with MAI in certain retinal range,and partialΔRPRE is closely associated with ΔSER and ΔAL.
基金supported by UGC Sponsored UPE-ⅡProject in Cognitive Science of Jadavpur University,Kolkata
文摘The paper introduces an electroencephalography(EEG) driven online position control scheme for a robot arm by utilizing motor imagery to activate and error related potential(ErrP) to stop the movement of the individual links, following a fixed(pre-defined) order of link selection. The right(left)hand motor imagery is used to turn a link clockwise(counterclockwise) and foot imagery is used to move a link forward. The occurrence of ErrP here indicates that the link under motion crosses the visually fixed target position, which usually is a plane/line/point depending on the desired transition of the link across 3D planes/around 2D lines/along 2D lines respectively. The imagined task about individual link's movement is decoded by a classifier into three possible class labels: clockwise, counterclockwise and no movement in case of rotational movements and forward, backward and no movement in case of translational movements. One additional classifier is required to detect the occurrence of the ErrP signal, elicited due to visually inspired positional link error with reference to a geometrically selected target position. Wavelet coefficients and adaptive autoregressive parameters are extracted as features for motor imagery and ErrP signals respectively. Support vector machine classifiers are used to decode motor imagination and ErrP with high classification accuracy above 80%. The average time taken by the proposed scheme to decode and execute control intentions for the complete movement of three links of a robot is approximately33 seconds. The steady-state error and peak overshoot of the proposed controller are experimentally obtained as 1.1% and4.6% respectively.
基金Supported by the Major Program of the Strategic Pilot Science and Technology Foundation of Chinese Academy of Sciences(XDA14020500)the CNPC Science and Technology Major Project(2019A-3912,2018E-2107).
文摘As the current calculation methods for wellbore separation factor have some deficiencies, we propose and analyze a new calculation approach for wellbore separation factor based on the relative position of adjacent wellbores, named as relative position method for short. Based on the trajectory error ellipsoid model of single wellbore, the error ellipsoids model of adjacent wellbore was derived considering the correlation of trajectory errors between adjacent wells. Furthermore, the calculation formula of the separation factor based on relative position of adjacent wellbore was derived and solved with the conjugate gradient algorithm. Case study shows that the new approach is more precise and higher in applicability than the ellipsoid scaling method and the minimum distance method, it can evaluate the state of well collision more reasonably. By doing batch calculation with the new method and following the criterion of well collision avoidance, the permissible ranges of key parameters in the well design can be worked out quickly. This method has good application in the design of cluster wells and directional wells.
基金supported by the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(No.2021QNLM020001)the Major Scientific and Technological Projects of Shandong Energy Group(No.SNKJ2022A06-R23)+1 种基金the Funds of Creative Research Groups of China(No.41821002)the Major Scientific and Technological Projects of CNPC(No.ZD2019-183-003).
文摘To reduce the spatial simulation error generated by the finite difference method,previous researchers compute the optimal finite-difference weights always by minimizing the error of spatial dispersion relation.However,we prove that the spatial simulation error of the finite difference method is associated with the dot product of the spatial dispersion relation of the finite-difference weights and the spectrum of the seismic wavefield.Based on the dot product relation,we construct a L_(2) norm cost function to minimize spatial simulation error.For solving this optimization problem,the seismic wavefield infor-mation in wavenumber region is necessary.Nevertheless,the seismic wavefield is generally obtained by costly forward modeling techniques.To reduce the computational cost,we substitute the spectrum of the seismic wavelet for the spectrum of the seismic wavefield,as the seismic wavelet plays a key role in determining the seismic wavefield.In solving the optimization problem,we design an exhaustive search method to obtain the solution of the L_(2) norm optimization problem.After solving the optimization problem,we are able to achieve the finite-difference weights that minimize spatial simulation error.In theoretical error analyses,the finite-difference weights from the proposed method can output more accurate simulation results compared to those from previous optimization algorithms.Furthermore,we validate our method through numerical tests with synthetic models,which encompass homogenous/inhomogeneous media as well as isotropic and anisotropic media.
文摘We consider the partially linear multiplicative model with monotonic constraint for the analysis of positive response data. We propose a constrained least product relative error (LPRE) estimation procedure for the model by means of B-spline basis expansion. We have also established asymptotic properties of the proposed estimators under regularity conditions. We finally provide numerical simulations and a real data application to assess the finite sample performance of the developed methodology.
基金Project(51321065)supported by the Innovative Research Groups of the National Natural Science Foundation of ChinaProject(2013CB035904)supported by the National Basic Research Program of China(973 Program)Project(51439005)supported by the National Natural Science Foundation of China
文摘Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network model and measured data,a 3-D fracture network dynamic modeling method based on error analysis was proposed.Firstly,errors of four fracture volume density estimation methods(proposed by ODA,KULATILAKE,MAULDON,and SONG)and that of four fracture size estimation methods(proposed by EINSTEIN,SONG and TONON)were respectively compared,and the optimal methods were determined.Additionally,error index representing the deviation between fracture network model and measured data was established with integrated use of fractal dimension and relative absolute error(RAE).On this basis,the downhill simplex method was used to build the dynamic modeling method,which takes the minimum of error index as objective function and dynamically adjusts the fracture density and size parameters to correct the error index.Finally,the 3-D fracture network model could be obtained which meets the requirements.The proposed method was applied for 3-D fractures simulation in Miao Wei hydropower project in China for feasibility verification and the error index reduced from 2.618 to 0.337.
基金supported by the Chinese National Natural Science Foundation under Grant(51375056)the Beijing Natural Science Foundation under Grant(3142009)the key of Beijing Natural Science Foundation under Grant(KZ201211232039)
文摘In the X-C linkage grinding of non-circular parts,the computation and control method of contour error in polar coordinates platform is different with that in the XY coordinates platform.To solve this problem,the analysis of the definition and computation methods for contour error and track error in polar coordinates platform will be made.Through the relative lead-lag relation of the linkage axes in the grinding process,the range of the estimation contour error is narrowed and a contour error calculation model is constructed.Then the contour compensation controllers along contour error direction and trajectory tracking error direction are designed respectively,and the error compensation decoupling matrix of the X-C linkage axes is given as well.In the end of this paper,we take the machining of the cylinder contour in Wankel rotary piston engine as an example.A simulation experiment of contour error compensation control based on relative lead-lag quantity is made.The result shows that the designed contour compensation controller can increase the contour machining accuracy effectively.
文摘This paper describes the geometric and statistical properties of areal object under randomness. In order to describe formally such a uncertain topological relation, a new formal model (i.e. 4ID model) is proposed. On the basis of this, the effects of positional uncertainty on topological relations between areal objects are investigated in detail. Some possibility functions for the determination of relations are constructed based on the assumption that randomness of point location complies with a normal distribution, and the concept of uncertain sets of topological relations under randomness is introduced.
基金supported in part by the Shanghai Science and Technology Innovation Action Plan(Grant No.19511101300)in part by the Key Laboratory of EMBEDded System and Service Computing(Ministry of Education)(Grant Nos.ESSCKF201902 and ESSCKF202102)in part by the National Nature Science Foundation of China(Grant Nos.62172299 and 62032019).
文摘Workflow system has become a standard solution for managing a complex business process.How to guarantee its correctness is a key requirement.Many methods only focus on the control-flow verification,while they neglect the modeling and checking of data-flows.Although some studies are presented to repair the data-flow errors,they do not consider the effect of delete operations or weak circulation relations on the repairing results.What’s more,repairing some data-flow errors may bring in new errors.In order to solve these problems,we use workflow net with data(WFD-net)systems to model and analyze a workflow system.Based on weak behavioral relations and order relations in a WFD-net system,we formalize four kinds of data-flow errors.After then,we reveal the relations between these errors and organize them into a hierarchy.Furthermore,we propose some new methods to repair data-flow errors in a WFD-net system based on system requirements and repair strategies.Finally,a case study of campus-card recharging shows the applicability of our methods,and a group of experiments show their advantages and effectiveness.
文摘<div style="text-align:justify;"> According to the problem that the low measurement accuracy of TH-1 satellite star sensor, the low frequency and “slow drift” error which cannot be ignored in the attitude determination system, resulting in obvious random error in the horizontal position and elevation direction, and the change of the error with time and latitude, cannot be calibrated by the ground field of the real problem. In this paper, a low frequency detection model is established by using the principle of relative orientation, and the low frequency error is obtained by parallax elimination. Finally, the satellite attitude is compensated and the more accurate exterior orientation elements are obtained, thus improving the positioning accuracy and stability. The experimental results show that: the proposed methods are feasible, and by using the model to dynamically calibrate the exterior orientation angle elements on orbit, the plane and elevation errors of the ground points can be basically eliminated. The global uncontrollable positioning accuracy and stability of the photogrammetry satellite are improved. </div>
基金Supported by National Social Science Fund(06BTQ017)
文摘The Dynamic relation mechanism between ZCE cotton futures price and related listed company stock price has been studied based on the metastock historical data in January 1st,2007 to September 1st,2010,Johansen co-integration analysis,Vector error correction model,Granger causality test and variance decomposition method.The results indicated that:long-term equilibrium relationship existed between ZCE cotton futures price and Xinsai share stock price while which changed in the same tendency and speed in the long-term.Cotton futures price is the main reason for the changing of Xinsai share stock price.The lead-lag relationship in changing course had been confirmed that existed between ZCE cotton futures price and the Xinsai share stock price.Meanwhile,the forward pass mechanism of price changing information had been found only from the ZCE cotton futures market to the stock market while showing asymmetry.Conclusions of the study can be used for cotton and related corporate to hedge business risks by the cotton price changes.
文摘In this work we used the Gaussian plume model to calculate the actual maximum ground level concentration (MGLC) of air pollutant and its downwind location by using different systems of dispersion parameters and for different stack heights. An approximate formula for the prediction of downwind position that produces the MGLC of a pollutant based on the Gaussian formula was derived for different diffusion parameters. The derived formula was used to calculate the approximate MGLC. The actual and estimated values are presented in tables. The comparison between the actual and estimated values was investigated through the calculation of the relative errors. The values of the relative errors between the actual and estimated MGLC lie in the range from: 0 to 70.2 and 0 to 1.6 for Pasquill Gifford system and Klug system respectively. The errors between the actual and estimated location of the MGLC lies in the range from: 0.2 to 227 and 0.7 to 9.4 for Pasquill Gifford system and Klug system respectively.
基金Supported by The Agency for Healthcare Research and Quality,No.R18HS02420-01
文摘Clinical decision support(CDS) systems with automated alerts integrated into electronic medical records demonstrate efficacy for detecting medication errors(ME) and adverse drug events(ADEs). Critically ill patients are at increased risk for ME, ADEs and serious negative outcomes related to these events. Capitalizing on CDS to detect ME and prevent adverse drug related events has the potential to improve patient outcomes. The key to an effective medication safety surveillance system incorporating CDS is advancing the signals for alerts by using trajectory analyses to predict clinical events, instead of waiting for these events to occur. Additionally, incorporating cutting-edge biomarkers into alert knowledge in an effort to identify the need to adjust medication therapy portending harm will advance the current state of CDS. CDS can be taken a step further to identify drug related physiological events, which are less commonly included in surveillance systems. Predictive models for adverse events that combine patient factors with laboratory values and biomarkers are being established and these models can be the foundation for individualized CDS alerts to prevent impending ADEs.
文摘In this article, we consider the varying coefficient multiplicative regression model, which is very useful to model the positive response. The criterion of least product relative error(LPRE) is extended to the varying coefficient multiplicative regression model by kernel smoothing techniques. Consistency and asymptotic normality of the proposed estimator are established. Some numerical simulations are carried out to assess the performance of the proposed estimator. As an illustration, the ethanol data is analyzed.
基金supported by the National Natural Science Foundation of China under Grant Nos.11231010 and 11471302
文摘As an alternative to absolute error methods, such as the least square and least absolute deviation estimations, a product relative error estimation is proposed for a multiplicative single index regression model. Regression coefficients in the model are estimated via a two-stage procedure and their statistical properties such as consistency and normality are studied. Numerical studies including simulation and a body fat example show that the proposed method performs well.
文摘Relative error rather than the error itself is of the main interest in many practical applications. Criteria based on minimizing the sum of absolute relative errors （MRE） and the sum of squared relative errors （RLS） were proposed in the different areas. Motivated by K. Chen et al.＇s recent work [J. Amer. Statist. Assoc., 2010, 105： 1104-1112] on the least absolute relative error （LARE） estimation for the accelerated failure time （AFT） model, in this paper, we establish the connection between relative error estimators and the M-estimation in the linear model. This connection allows us to deduce the asymptotic properties of many relative error estimators （e.g., LARE） by the well-developed M-estimation theories. On the other hand, the asymptotic properties of some important estimators （e.g., MRE and RLS） cannot be established directly. In this paper, we propose a general relative error criterion （GREC） for estimating the unknown parameter in the AFT model. Then we develop the approaches to deal with the asymptotic normalities for M-estimators with differentiable loss functions on R or R／{0} in the linear model. The simulation studies are conducted to evaluate the performance of the proposed estimates for the different scenarios. Illustration with a real data example is also provided.
