Membrane fouling has been investigated by using a polysulfone ultrafiltration membrane with the molecular weight cutoff of 20 kDa to treat crushed coal pressurized gasification wastewater. Under the conditions of diff...Membrane fouling has been investigated by using a polysulfone ultrafiltration membrane with the molecular weight cutoff of 20 kDa to treat crushed coal pressurized gasification wastewater. Under the conditions of different feed pressures, the permeate flux declines and rejection coefficients of pollutants referring to three parameters （total organic carbon （TOC）, chroma and turbidity） were studied. The membrane fouling mechanism was simulated with three classical membrane fouling models. The membrane image and pollutants were analyzed by scanning electron microscopy and gas chromatography-mass spectrography （GC-MS）. The results indicate that the permeate flux decreases with volume reduction factor before reaching a constant value. The rejection coefficients were also measured： fTOC = 70.5%,fc = 84.9% andfa- = 91%. Further analysis shows that the higher the feed pressure is, the sooner the permeate flux reaches constant value and the more sharply the permeate flux declines. Constant flux indicates a nonlinear growth with feed pressure （PF）： when Pr equals 1.2 bar, the mark for the critical flux, slight membrane fouling occurs; when PF exceeds 1.2 bar, cake layer pollution aggravates. Also the rejection coefficients of global pollutant increases slightly with PF, suggesting the possibility of cake compression when PF exceeds 1.2 bar. Through regression analysis, the fouling of polysulfone ultrafiltration membrane could be fitted very well by cake filtration model. The membrane pollutants were identified as phthalate esters and long-chain alkenes by GC-MS, and a certain amount of inorganic pollutants by X-ray photoelectron spectroscopy.展开更多
This paper proposes a novel high-power supply rejection ratio（high-PSRR） high-order curvature-compensated CMOS bandgap voltage reference（BGR） in SMIC 0.18 μm CMOS process. Three kinds of current are added to a co...This paper proposes a novel high-power supply rejection ratio（high-PSRR） high-order curvature-compensated CMOS bandgap voltage reference（BGR） in SMIC 0.18 μm CMOS process. Three kinds of current are added to a conventional BGR in order to improve the temperature drift within wider temperature range, which include a piecewise-curvaturecorrected current in high temperature range, a piecewise-curvature-corrected current in low temperature range and a proportional-to-absolute-temperature T^（1.5） current. The high-PSRR characteristic of the proposed BGR is achieved by adopting the technique of pre-regulator. Simulation results shows that the temperature coefficient of the proposed BGR with pre-regulator is 8.42x10^（-6）′ /℃ from - 55 ℃ to 125 ℃ with a 1.8 V power supply voltage. The proposed BGR with pre-regulator achieves PSRR of - 123.51 dB, - 123.52 dB, - 88.5 dB and - 50.23 dB at 1 Hz, 100 Hz, 100 kHz and 1 MHz respectively.展开更多
文摘Membrane fouling has been investigated by using a polysulfone ultrafiltration membrane with the molecular weight cutoff of 20 kDa to treat crushed coal pressurized gasification wastewater. Under the conditions of different feed pressures, the permeate flux declines and rejection coefficients of pollutants referring to three parameters （total organic carbon （TOC）, chroma and turbidity） were studied. The membrane fouling mechanism was simulated with three classical membrane fouling models. The membrane image and pollutants were analyzed by scanning electron microscopy and gas chromatography-mass spectrography （GC-MS）. The results indicate that the permeate flux decreases with volume reduction factor before reaching a constant value. The rejection coefficients were also measured： fTOC = 70.5%,fc = 84.9% andfa- = 91%. Further analysis shows that the higher the feed pressure is, the sooner the permeate flux reaches constant value and the more sharply the permeate flux declines. Constant flux indicates a nonlinear growth with feed pressure （PF）： when Pr equals 1.2 bar, the mark for the critical flux, slight membrane fouling occurs; when PF exceeds 1.2 bar, cake layer pollution aggravates. Also the rejection coefficients of global pollutant increases slightly with PF, suggesting the possibility of cake compression when PF exceeds 1.2 bar. Through regression analysis, the fouling of polysulfone ultrafiltration membrane could be fitted very well by cake filtration model. The membrane pollutants were identified as phthalate esters and long-chain alkenes by GC-MS, and a certain amount of inorganic pollutants by X-ray photoelectron spectroscopy.
基金supported by the National Natural Science Foundation of China (61471075, 61301124)the 2013 Program for Innovation Team Building at Institutions of Higher Education in Chongqing (the Innovation Team of Smart Medical System and Key Technology)
文摘This paper proposes a novel high-power supply rejection ratio（high-PSRR） high-order curvature-compensated CMOS bandgap voltage reference（BGR） in SMIC 0.18 μm CMOS process. Three kinds of current are added to a conventional BGR in order to improve the temperature drift within wider temperature range, which include a piecewise-curvaturecorrected current in high temperature range, a piecewise-curvature-corrected current in low temperature range and a proportional-to-absolute-temperature T^（1.5） current. The high-PSRR characteristic of the proposed BGR is achieved by adopting the technique of pre-regulator. Simulation results shows that the temperature coefficient of the proposed BGR with pre-regulator is 8.42x10^（-6）′ /℃ from - 55 ℃ to 125 ℃ with a 1.8 V power supply voltage. The proposed BGR with pre-regulator achieves PSRR of - 123.51 dB, - 123.52 dB, - 88.5 dB and - 50.23 dB at 1 Hz, 100 Hz, 100 kHz and 1 MHz respectively.
