The production of hydrogen peroxide(H_(2)O_(2))via artificial photosynthesis using single-atom semiconductor photocatalysts represents a promising green and sustainable technology.However,its efficiency is still limit...The production of hydrogen peroxide(H_(2)O_(2))via artificial photosynthesis using single-atom semiconductor photocatalysts represents a promising green and sustainable technology.However,its efficiency is still limited by sluggish water oxidation kinetics,poor photogenerated charge separation,and insufficient O_(2)adsorption and activation capabilities.Herein,uniformly dispersed single-atom catalysts(SACs)with a Co-N_(4)coordination structure have been synthesized by thermally transforming cobalt phthalocyanine(CoPc)assemblies pre-anchored on phosphate functionalized reduced graphene oxide(Co@rGO-P),and then used to construct heterojunctions with perylenetetracarboxylic acid(PTA)nanosheets for photocatalytic H_(2)O_(2)production by an in-situ growth method.The optimized Co@rGO-P/PTA achieved an H_(2)O_(2)production rate of 1.4 mmol g^(-1)h^(-1)in pure water,with a 12.9-fold enhancement compared to pristine PTA nanosheets exhibiting competitive photoactivity among reported perylene-based materials.Femtosecond transient absorption spectra,in-situ diffuse reflectance infrared Fourier transform spectra and theoretical calculations reveal that the exceptional performance is attributed to the enhanced electron transfer from PTA to rGO via the phosphate bridge and then to the Co-N_(4),and to the promoted O_(2)adsorption and activation at Co-N_(4)active sites.This work provides a feasible and effective strategy for designing highly efficient single-atom semiconductor heterojunction photocatalysts for H_(2)O_(2)production.展开更多
Amorphous materials have recently gained much attention as electrode materials in supercapacitor application due to the presence of larger amount active sites which can efficiently increase the storage capacity of the...Amorphous materials have recently gained much attention as electrode materials in supercapacitor application due to the presence of larger amount active sites which can efficiently increase the storage capacity of the materials.Nano engineering is an elegant approach to fully utilize the advantages of the amorphous structure.Moreover,large surface area and high conductivity of reduced graphene oxide(RGO)can efficiently increase the storage capacity of the system.Exploiting this idea,in the present work,we have successfully synthesized amorphous MoS2 of two different sizes on reduced graphene oxide and thoroughly investigated the supercapacitor behavior of the system.The specific capacitance of the composite structures has been found to be largely increased with decreasing size of the amorphous nano particle.The specific capacitance of amorphous MoS2-RGO composite containing nearly 50 nm of MoS2 found to be 270 F/g whereas when the particle size is reduced to 5–7 nm,value of specific capacitance increases to 460 F/g.The large increase in specific capacitance with the tuning of the size of amorphous nano particle has been explained by the presence of a large number of active sulfur edges of ultra-small MoS2 nano structure along with the better charge transport which can effectively increase the storage capacity of the overall system.The retention in the capacitance of the material has been found to be 90%after 5000 cycles.展开更多
Reduced graphene oxide(rGO)aerogels are emerging as very attractive scaffolds for high-performance electromagnetic wave absorption materials(EWAMs)due to their intrinsic conductive networks and intricate interior micr...Reduced graphene oxide(rGO)aerogels are emerging as very attractive scaffolds for high-performance electromagnetic wave absorption materials(EWAMs)due to their intrinsic conductive networks and intricate interior microstructure,as well as good compatibility with other electromagnetic(EM)components.Herein,we realized the decoration of rGO aerogel with Mo_(2)C nanoparticles by sequential hydrothermal assembly,freeze-drying,and high-temperature pyrolysis.Results show that Mo_(2)C nanoparticle loading can be easily controlled by the ammonium molybdate to glucose molar ratio.The hydrophobicity and thermal insulation of the rGO aerogel are effectively improved upon the introduction of Mo_(2)C nanoparticles,and more importantly,these nanoparticles regulate the EM properties of the rGO aerogel to a large extent.Although more Mo_(2)C nanoparticles may decrease the overall attenuation ability of the rGO aerogel,they bring much better impedance matching.At a molar ratio of 1:1,a desirable balance between attenuation ability and impedance matching is observed.In this context,the Mo_(2)C/r GO aerogel displays strong reflection loss and broad response bandwidth,even with a small applied thickness(1.7 mm)and low filler loading(9.0wt%).The positive effects of Mo_(2)C nanoparticles on multifunctional properties may render Mo_(2)C/r GO aerogels promising candidates for high-performance EWAMs under harsh conditions.展开更多
Most resistance-type humidity sensors exhibit negative humidity sensitivity,i.e.,their resistance decreases with a corresponding increase in humidity.This is primarily attributed to the dominant role of ionic conducti...Most resistance-type humidity sensors exhibit negative humidity sensitivity,i.e.,their resistance decreases with a corresponding increase in humidity.This is primarily attributed to the dominant role of ionic conduction in adsorbed water.In this work,a humidity sensor based on a p-type reduced graphene oxide(p-rGO)with positive humidity sensitivity is proposed.Moreover,its positive humidity sensing response is further enhanced by n-type WS_(2) nanoparticles modification.The results show that both rGO and r GO/WS_(2) humidity sensors have good linear response in the relative humidity(RH)range of0%-91.5%.The sensitivity of the rGO/WS_(2) humidity sensor is 1.87 times that of rGO humidity sensor,which is mainly attributed to p-n heterojunction between rGO and WS_(2).Besides,the r GO/WS_(2) humidity sensor has small humidity hysteresis(-3%RH)and good repeatability.This work demonstrates a humidity sensor based on rGO/WS_(2) composite film and provides a facile route for fabricating humidity sensor with positive humidity sensing properties.展开更多
Iron disulfide is considered to be a potential anode material for sodium-ion batteries due to its high theoretical capacity. However, its applications are seriously limited by the weak conductivity and large volume ch...Iron disulfide is considered to be a potential anode material for sodium-ion batteries due to its high theoretical capacity. However, its applications are seriously limited by the weak conductivity and large volume change, which results in low reversible capacity and poor cycling stability.Herein, reduced graphene oxide-wrapped FeS_2(FeS_2/rGO)composite was fabricated to achieve excellent electrochemical performance via a facile two-step method. The introduction of rGO effectively improved the conductivity,BET surface area, and structural stability of the FeS_2 active material, thus endowing it with high specific capacity, good rate capability, as well as excellent cycling stability. Electrochemical measurements show that the FeS_2/rGO composite had a high initial discharge capacity of 1263.2 mAh gg^(-1) at 100 mA gg^(-1) and a high discharge capacity of 344 mAh gg^(-1) at 10 A gg^(-1), demonstrating superior rate performance. After 100 cycles at 100 mA gg^(-1),the discharge capacity remained at 609.5 mAh g^(-1), indicating the excellent cycling stability of the FeS_2/rGO electrode.展开更多
In this paper,ZnZnFe_(2)O_(4) nanorods were prepared using Zn/Fe metal organic framework(MOF)as precursors,and ZnZnFe_(2)O_(4)/reduced graphene oxide(rGO)was prepared by hydrothermal method.The morphology and composit...In this paper,ZnZnFe_(2)O_(4) nanorods were prepared using Zn/Fe metal organic framework(MOF)as precursors,and ZnZnFe_(2)O_(4)/reduced graphene oxide(rGO)was prepared by hydrothermal method.The morphology and composition of the ZnZnFe_(2)O_(4)/rGO nanocomposite were characterized,and the results showed that the MOF-derived ZnZnFe_(2)O_(4) nanorods are uniformly modified on the surface of rGO.The ZnZnFe_(2)O_(4)/rGO nanocomposite exhibits better SO_(2) gas sensing performance than the single ZnZnFe_(2)O_(4) nanorods at room temperature.The sensing characteristics of single ZnZnFe_(2)O_(4) film sensor,single rGO film sensor and ZnZnFe_(2)O_(4)/rGO composite film sensor at SO_(2)gas concentration(1×10^(-6)-100×10^(-6))were tested.The response of ZnZnFe_(2)O_(4)/rGO composite sensor can reach 18.32%at room temperature.Compared with single ZnZnFe_(2)O_(4) and rGO film sensors,the ZnZnFe_(2)O_(4)/rGO composite sensor has better transient response,good sensitivity and selectivity.In this work,the improvement of the sensor performance is not only due to the p-n heterostructure between ZnZnFe_(2)O_(4) nanorods and rGO nanosheets,but also to the excellent electrical properties of rGO.It provides a new idea for the detection of SO_(2) at room temperature.展开更多
Metal oxide semiconductors(MOS)-reduced graphene oxide(rGO)nanocomposites have attracted great attention for room-tempe rature gas sensing applications.The development of novel sensing materials is the key issue for t...Metal oxide semiconductors(MOS)-reduced graphene oxide(rGO)nanocomposites have attracted great attention for room-tempe rature gas sensing applications.The development of novel sensing materials is the key issue for the effective detection of ammoniagas at room temperature.In the present work,the novel reduced graphene oxide(rGO)-In2 O3 nanocubes hybrid materials have been prepared via a simple electrostatic self-assembly strategy.Characterization re sults exhibit that the intimate interfacial contact between In2 O3 nanocubes and the rGO sheets are achieved.Particularly,the as-prepared rGO/In2 O3 nanocomposites displayed high sensitivity,fast response and excellent selectivity towards ammonia(NH3)at room-temperature,which clearly uncovers the merit of structural design and rational integration with rGO sheets.The superior gas sensing performance of the rGO/In2 O3 nanocomposites can be attributed to the synergetic effects of rGO sheets and porous In2 O3 nanocubes.The reported synthesis offers a general approach to rGO/MOS-based semiconductor composites for room-temperature gas sensing applications.展开更多
As one of prussian blue analogues,Co_(3)[Co(CN)_(6)]_(2) has been explored as a promising anode material for potassium-ion batteries(PIBs) owing to its high potassium storage capacity.Unfortunately,Co_(3)[Co(CN)_(6)]_...As one of prussian blue analogues,Co_(3)[Co(CN)_(6)]_(2) has been explored as a promising anode material for potassium-ion batteries(PIBs) owing to its high potassium storage capacity.Unfortunately,Co_(3)[Co(CN)_(6)]_(2) possesses low electronic conductivity and its structure collapses easily during potassiation and depotassiation,resulting in poor rate performance and cyclic stability.To solve these problems,we develop a facile multi-step method to successfully combine uniformCo_(3)[Co(CN)_(6)]_(2) nanocubes with rGO by C-O-Co bonds.As expected,these chemcial bonds shorten the distance betweenCo_(3)[Co(CN)_(6)]_(2) and rGO to the angstrom meter level,which significantly improve the electronic conductivity ofCo_(3)[Co(CN)_(6)]_(2).Besides,the complete encapsulation ofCo_(3)[Co(CN)_(6)]_(2) nanocubes by rGO endows the structure ofCo_(3)[Co(CN)_(6)]_(2) with high stability,thus withstanding repeated insertion/extraction of potassium-ions without visible morphological and structural changes.Benefiting from the abovementioned structural advantages,the CO3 [Co(CN)6]2/rGO nanocomposite exhibits a high reversible capacity of 400.8 mAh g^(-1) at a current density of 0.1 A g^(-1),an exceptional rate capability of 115.5 mAh g^(-1) at 5 A g^(-1), and an ultralong cycle life of 231.9 mAh g^(-1) at 0.1 A g^(-1) after 1000 cycles.Additionally,the effects of different amounts of rGO and different sizes ofCo_(3)[Co(CN)_(6)]_(2) nanocubes on the potassium storage performance are also studied.This work offers an ideal route to significantly enhance the electrochemical properties of prussian blue analogues.展开更多
Considering the high filling ratios,high densities,and narrow absorbing bandwidths of the current electromagnetic wave(EMW) absorbers,in this work,we successfully synthesized a 3 D hierarchical NiCo_(2) O_(4) nanoflow...Considering the high filling ratios,high densities,and narrow absorbing bandwidths of the current electromagnetic wave(EMW) absorbers,in this work,we successfully synthesized a 3 D hierarchical NiCo_(2) O_(4) nanoflowers/reduced graphene oxide(NiCo_(2) O_(4)/RGO) composite foam by a simple method under gentle condition.The NiCo_(2) O_(4) nanoflowers and unique 3 D foam structure are beneficial to the refraction and scattering of EMW,which endows the prepared 3 D foam with highly efficient EMW absorption performance.When the ratio between NiCo_(2) O_(4) and RGO in the foam is 1:1,5% mass fraction of NiCo_(2) O_(4/)RGO foam in paraffin wax can reach a minimum reflection loss(RL_(min)) value of-52.2 dB with a thin thickness merely 2.6 mm.Simultaneously,the effective absorption bandwidth(EAB,RL exceeding-10 dB) is7.04 GHz that covers the whole Ku band(10.96-18 GHz).Moreover,the effects of the thickness of the absorber and the loading ratios of the foam in paraffin wax matrix on the EMW absorption properties are also carefully investigated.The results indicate that the optimum EMW absorption performance of NiCo_(2) O_(4/)RGO can be tuned in different bands.The EMW absorption mechanism is ascribed to the proper impedance matching and larger dielectric and magnetic loss produced by the synergy of NiCo_(2) O_(4) and RGO.Therefore,the NiCo_(2) O_(4/)RGO hybrid foam is ideal candidate to be used as high-efficient EMW absorbers with low filling ratio,light weight,and broad frequency bandwidths.展开更多
Bi_(2)O_(2)CO_(3)(BOC)/Bi_(4)O_5Br_(2)(BOB)/reduced graphene oxide(rGO)Z-scheme heterojunction with promising photocatalytic properties was synthesized via a facile one-pot room-temperature method.Ultra-thin nanosheet...Bi_(2)O_(2)CO_(3)(BOC)/Bi_(4)O_5Br_(2)(BOB)/reduced graphene oxide(rGO)Z-scheme heterojunction with promising photocatalytic properties was synthesized via a facile one-pot room-temperature method.Ultra-thin nanosheets of BOC and BOB were grown in situ on r GO.The formed 2D/2D direct Z-scheme heterojunction of BOC/BOB with oxygen vacancies(OVs)effectively leads to lower negative electron reduction potential of BOB as well as higher positive hole oxidation potential of BOC,showing improved reduction/oxidation ability.Particularly,rGO is an acceptor of the electrons from the conduction band of BOC.Its dual roles significantly improve the transfer performance of photo-induced charge carriers and accelerate their separation.With layered nanosheet structure,rich OVs,high specific surface area,and increased utilization efficiency of visible light,the multiple synergistic effects of BOC/BOB/rGO can achieve effective generation and separation of the electron-holes,thereby generating more·O_(2)^(-)and h^(+).The photocatalytic reduction efficiency of CO_(2)to CO(12.91μmol/(g·hr))is three times higher than that of BOC(4.18μmol/(g·hr)).Moreover,it also achieved almost 100%removal of Rhodamine B and cyanobacterial cells within 2 hours.展开更多
Here,Ag2S nanoparticles on reduced graphene oxide（Ag2S NPs/RGO） nanocomposites with relatively good distribution are synthesized for the first time by conversing Ag NPs/RGO to Ag2S NPs/RGO via a facile hydrothermal ...Here,Ag2S nanoparticles on reduced graphene oxide（Ag2S NPs/RGO） nanocomposites with relatively good distribution are synthesized for the first time by conversing Ag NPs/RGO to Ag2S NPs/RGO via a facile hydrothermal sulfurization method.As an noval catalyst for the reduction of 4-nitrophenol（4-NP）,it only takes 5 min for Ag2S NPs/RGO to reduce 98% of 4-NP,and the rate constant of the composites is almost 13 times higher than that of Ag NPs/RGO composites.The high catalytic activity of Ag2S NPs/RGO can be attributed to the following three reasons：（1） Like metal complex catalysts,the Ag2S NPs is also rich with metal center Ag（δ^＋）,with pendant base S（δ） close to it,and thus the Ag and basic S function as the electron-acceptor and proton-acceptor centers,respectively,which facilitates the catalyst reaction;（2）RGO features the high adsorption ability toward 4-NP which provides a high concentration of 4-NP near the Ag2S NPs;and（3） electron transfer from RGO to Ag2S NPs,facilitating the uptake of electrons by 4-NP molecules.展开更多
Considering the serious electromagnetic wave(EMW)pollution problems and complex application condition,there is a pressing need to amalgamate multiple functionalities within a single substance.However,the effective int...Considering the serious electromagnetic wave(EMW)pollution problems and complex application condition,there is a pressing need to amalgamate multiple functionalities within a single substance.However,the effective integration of diverse functions into designed EMW absorption materials still faces the huge challenges.Herein,reduced graphene oxide/carbon foams(RGO/CFs)with two-dimensional/three-dimensional(2D/3D)van der Waals(vdWs)heterostructures were meticulously engineered and synthesized utilizing an efficient methodology involving freeze-drying,immersing absorption,secondary freeze-drying,followed by carbonization treatment.Thanks to their excellent linkage effect of amplified dielectric loss and optimized impedance matching,the designed 2D/3D RGO/CFs vdWs heterostructures demonstrated commendable EMW absorption performances,achieving a broad absorption bandwidth of 6.2 GHz and a reflection loss of-50.58 dB with the low matching thicknesses.Furthermore,the obtained 2D/3D RGO/CFs vdWs heterostructures also displayed the significant radar stealth properties,good corrosion resistance performances as well as outstanding thermal insulation capabilities,displaying the great potential in complex and variable environments.Accordingly,this work not only demonstrated a straightforward method for fabricating 2D/3D vdWs heterostructures,but also outlined a powerful mixeddimensional assembly strategy for engineering multifunctional foams for electromagnetic protection,aerospace and other complex conditions.展开更多
There have been ever-growing demands to develop advanced electrocatalysts for renewable energy conversion over the past decade.As a promising platform for advanced electrocatalysts,reduced graphene oxide(rGO)has attra...There have been ever-growing demands to develop advanced electrocatalysts for renewable energy conversion over the past decade.As a promising platform for advanced electrocatalysts,reduced graphene oxide(rGO)has attracted substantial research interests in a variety of electrochemical energy conversion reactions.Its versatile utility is mainly attributed to unique physical and chemical properties,such as high specific surface area,tunable electronic structure,and the feasibility of structural modification and functionalization.Here,a comprehensive discussion is provided upon recent advances in the material preparation,characterization,and the catalytic activity of rGO-based electrocatalysts for various electrochemical energy conversion reactions(water splitting,CO2 reduction reaction,N2 reduction reaction,and O2 reduction reaction).Major advantages of rGO and the related challenges for enhancing their catalytic performance are addressed.展开更多
In this study, a new facile preparation method of nanocomposites consisting of graphene oxide and manganese dioxide nanowires（GO/MnO2 NWs） was developed. The morphology, structure and composition of the resulted pro...In this study, a new facile preparation method of nanocomposites consisting of graphene oxide and manganese dioxide nanowires（GO/MnO2 NWs） was developed. The morphology, structure and composition of the resulted products were characterized by transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption. The GO/MnO2 nanocomposite was used as an electrode material for non-enzymatic determination of hydrogen peroxide. The proposed sensor exhibits excellent electrocatalytic performance for the determination of hydrogen peroxide in phosphate buffer solution（PBS, pH7） at an applied potential of 0.75 V. The non-enzymatic biosensor for determination of hydrogen peroxide displayed a wide linear range of 4.90 mmol L^-1–4.50 mmol L^-1with a correlation coefficient of 0.9992, a low detection limit of 0.48 mmol L^-1 and a high sensitivity of 191.22μA（mmol L^-1）^-1cm^-2（signal/noise, S/N = 3）. Moreover, the non-enzymatic biosensor shows an excellent selectivity.展开更多
The main bottleneck against industrial utilization of sodium ion batteries(SIBs)is the lack of high-capacity electrodes to rival those of the benchmark lithium ion batteries(LIBs).Here in this work,we have developed a...The main bottleneck against industrial utilization of sodium ion batteries(SIBs)is the lack of high-capacity electrodes to rival those of the benchmark lithium ion batteries(LIBs).Here in this work,we have developed an economical method for in situ fabrication of nanocomposites made of crystalline few-layer graphene sheets loaded with ultrafine SnO_(2)nanocrystals,using short exposure of microwave to xerogel of graphene oxide(GO)and tin tetrachloride containing minute catalyzing dispersoids of chemically reduced GO(RGO).The resultant nanocomposites(SnO_(2)@MWG)enabled significantly quickened redox processes as SIB anode,which led to remarkable full anode-specific capacity reaching 538 mAh g^(−1)at 0.05 A g^(−1)(about 1.45 times of the theoretical capacity of graphite for the LIB),in addition to outstanding rate performance over prolonged charge–discharge cycling.Anodes based on the optimized SnO_(2)@MWG delivered stable performance over 2000 cycles even at a high current density of 5 A g^(−1),and capacity retention of over 70.4%was maintained at a high areal loading of 3.4 mg cm^(−2),highly desirable for high energy density SIBs to rival the current benchmark LIBs.展开更多
Aqueous alkaline battery represents a promising energy storage technology with both high energy density and high power density as rechargeable batteries.However,the low theoretical capacities,kinetics and stability of...Aqueous alkaline battery represents a promising energy storage technology with both high energy density and high power density as rechargeable batteries.However,the low theoretical capacities,kinetics and stability of anode materials have limited their developments and commercializations.In this study,we propose a novel method to produce two-dimensional layered bismuth oxide selenium(Bi_(2)O_(2)Se)and reduced graphene oxide(r GO)composites via a one-step hydrothermal method.The volume change caused by phase change during rapid charging and discharging is significantly reduced and the capacity reaches 263.83 m Ah g^(-1)at a current density of 0.5 A g^(-1).The Bi_(2)O_(2)Se/r GO electrode exhibits excellent cycling stability in which the capacity retention rate is 81.04%after 5000 cycles.More importantly,the Bi_(2)O_(2)Se/r GO nanosheet composite is used as the anode electrode material with MnCo_(2)O_(4.5)@Ni(OH)_(2)as the cathode electrode material in aqueous alkaline battery.When the energy density is 76.16 W h kg^(-1),the power density reaches 308.65 W kg^(-1).At a power density of 10.21 k W kg^(-1),the energy density remains as high as 33.86 W h kg^(-1).The results presented here may advance the understanding of the issues facing the development of aqueous battery anode materials.展开更多
Flexible and micro-sized energy conversion/storage components are extremely demanding in portable and multifunctional electronic devices, especially those small,flexible, roll-up and even wearable ones. Here in this p...Flexible and micro-sized energy conversion/storage components are extremely demanding in portable and multifunctional electronic devices, especially those small,flexible, roll-up and even wearable ones. Here in this paper, a two-step electrochemical deposition method has been developed to coat Ni fibers with reduced graphene oxide and MnO2 subsequently, giving rise to Ni@reduced-graphene-oxide@MnO2 sheath-core flexible electrode with a high areal specific capacitance of 119.4 mF cm^-2 at a current density of 0.5 mA cm^-2 in 1 mol L^-1 Na2SO4 electrolyte. Using polyvinyl alcohol（PVA）-LiCl as a solid state electrolyte, two Ni@reduced-grapheneoxide@Mn02 flexible electrodes were assembled into a freestanding, lightweight, symmetrical fiber-shaped micro-supercapacitor device with a maximum areal capacitance of26.9 mF cm^-2. A high power density of 0.1 W cm^-3 could be obtained when the energy density was as high as0.27 mW h cm^-3. Moreover, the resulting micro-supercapacitor device also demonstrated good flexibility and high cyclic stability. The present work provides a simple, facile and low-cost method for the fabrication of flexible, lightweight and wearable energy conversion/storage micro-devices with a high-performance.展开更多
We have demonstrated a facile and efficient strategy for the fabrication of soluble reduced graphene oxide sheets （RGO） and the preparation of titanium oxide （TiO2） nanoparticle-RGO composites using a modified one...We have demonstrated a facile and efficient strategy for the fabrication of soluble reduced graphene oxide sheets （RGO） and the preparation of titanium oxide （TiO2） nanoparticle-RGO composites using a modified one-step hydrothermal method. It was found that graphene oxide could be easily reduced under solvothermal conditions with ascorbic acid as reductant, with concomitant growth of TiO2 particles on the RGO surface. The TiO2-RGO composite has been thoroughly characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Microscopy techniques （scanning electron microscopy, atomic force microscopy, and transmission electron microscopy） have been employed to probe the morphological characteristics as well as to investigate the exfoliation of RGO sheets. The TiOR-RGO composite exhibited excellent photocatalysis of hydrogen evolution.展开更多
文摘The production of hydrogen peroxide(H_(2)O_(2))via artificial photosynthesis using single-atom semiconductor photocatalysts represents a promising green and sustainable technology.However,its efficiency is still limited by sluggish water oxidation kinetics,poor photogenerated charge separation,and insufficient O_(2)adsorption and activation capabilities.Herein,uniformly dispersed single-atom catalysts(SACs)with a Co-N_(4)coordination structure have been synthesized by thermally transforming cobalt phthalocyanine(CoPc)assemblies pre-anchored on phosphate functionalized reduced graphene oxide(Co@rGO-P),and then used to construct heterojunctions with perylenetetracarboxylic acid(PTA)nanosheets for photocatalytic H_(2)O_(2)production by an in-situ growth method.The optimized Co@rGO-P/PTA achieved an H_(2)O_(2)production rate of 1.4 mmol g^(-1)h^(-1)in pure water,with a 12.9-fold enhancement compared to pristine PTA nanosheets exhibiting competitive photoactivity among reported perylene-based materials.Femtosecond transient absorption spectra,in-situ diffuse reflectance infrared Fourier transform spectra and theoretical calculations reveal that the exceptional performance is attributed to the enhanced electron transfer from PTA to rGO via the phosphate bridge and then to the Co-N_(4),and to the promoted O_(2)adsorption and activation at Co-N_(4)active sites.This work provides a feasible and effective strategy for designing highly efficient single-atom semiconductor heterojunction photocatalysts for H_(2)O_(2)production.
基金Scientific and Industrial Research(CSIR)DST-INSPIRE,Saptasree Bose+4 种基金Indian Association for The Cultivation of Science(IACS)for awarding their fellowshipsWest Bengal DST FISTCentral DST FIST programs for financial assistanceIACSDepartment of Science and Technology(DST),Govt.of India for infrastructural facilities.
文摘Amorphous materials have recently gained much attention as electrode materials in supercapacitor application due to the presence of larger amount active sites which can efficiently increase the storage capacity of the materials.Nano engineering is an elegant approach to fully utilize the advantages of the amorphous structure.Moreover,large surface area and high conductivity of reduced graphene oxide(RGO)can efficiently increase the storage capacity of the system.Exploiting this idea,in the present work,we have successfully synthesized amorphous MoS2 of two different sizes on reduced graphene oxide and thoroughly investigated the supercapacitor behavior of the system.The specific capacitance of the composite structures has been found to be largely increased with decreasing size of the amorphous nano particle.The specific capacitance of amorphous MoS2-RGO composite containing nearly 50 nm of MoS2 found to be 270 F/g whereas when the particle size is reduced to 5–7 nm,value of specific capacitance increases to 460 F/g.The large increase in specific capacitance with the tuning of the size of amorphous nano particle has been explained by the presence of a large number of active sulfur edges of ultra-small MoS2 nano structure along with the better charge transport which can effectively increase the storage capacity of the overall system.The retention in the capacitance of the material has been found to be 90%after 5000 cycles.
基金supported by the China Postdoctoral Science Foundation(No.2021MD703944)the Fund of Science and Technology on Near-Surface Detection Laboratory(No.6142414211808)+1 种基金the Director Fund of State Key Laboratory of Pulsed Power Laser Technology(No.SKL2021ZR06)the National Natural Science Foundation of China(No.21776053)。
文摘Reduced graphene oxide(rGO)aerogels are emerging as very attractive scaffolds for high-performance electromagnetic wave absorption materials(EWAMs)due to their intrinsic conductive networks and intricate interior microstructure,as well as good compatibility with other electromagnetic(EM)components.Herein,we realized the decoration of rGO aerogel with Mo_(2)C nanoparticles by sequential hydrothermal assembly,freeze-drying,and high-temperature pyrolysis.Results show that Mo_(2)C nanoparticle loading can be easily controlled by the ammonium molybdate to glucose molar ratio.The hydrophobicity and thermal insulation of the rGO aerogel are effectively improved upon the introduction of Mo_(2)C nanoparticles,and more importantly,these nanoparticles regulate the EM properties of the rGO aerogel to a large extent.Although more Mo_(2)C nanoparticles may decrease the overall attenuation ability of the rGO aerogel,they bring much better impedance matching.At a molar ratio of 1:1,a desirable balance between attenuation ability and impedance matching is observed.In this context,the Mo_(2)C/r GO aerogel displays strong reflection loss and broad response bandwidth,even with a small applied thickness(1.7 mm)and low filler loading(9.0wt%).The positive effects of Mo_(2)C nanoparticles on multifunctional properties may render Mo_(2)C/r GO aerogels promising candidates for high-performance EWAMs under harsh conditions.
基金the National Science Funds for Excellent Young Scholars of China(No.61822106)the National Science Funds for Creative Research Groups of China(No.61421002)the National Natural Science Foundation of China(No.61671115)。
文摘Most resistance-type humidity sensors exhibit negative humidity sensitivity,i.e.,their resistance decreases with a corresponding increase in humidity.This is primarily attributed to the dominant role of ionic conduction in adsorbed water.In this work,a humidity sensor based on a p-type reduced graphene oxide(p-rGO)with positive humidity sensitivity is proposed.Moreover,its positive humidity sensing response is further enhanced by n-type WS_(2) nanoparticles modification.The results show that both rGO and r GO/WS_(2) humidity sensors have good linear response in the relative humidity(RH)range of0%-91.5%.The sensitivity of the rGO/WS_(2) humidity sensor is 1.87 times that of rGO humidity sensor,which is mainly attributed to p-n heterojunction between rGO and WS_(2).Besides,the r GO/WS_(2) humidity sensor has small humidity hysteresis(-3%RH)and good repeatability.This work demonstrates a humidity sensor based on rGO/WS_(2) composite film and provides a facile route for fabricating humidity sensor with positive humidity sensing properties.
基金supported by National Natural Science Foundation of China (51702138, 51702079)Natural Science Foundation of Jiangsu Province (BK20160213)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Iron disulfide is considered to be a potential anode material for sodium-ion batteries due to its high theoretical capacity. However, its applications are seriously limited by the weak conductivity and large volume change, which results in low reversible capacity and poor cycling stability.Herein, reduced graphene oxide-wrapped FeS_2(FeS_2/rGO)composite was fabricated to achieve excellent electrochemical performance via a facile two-step method. The introduction of rGO effectively improved the conductivity,BET surface area, and structural stability of the FeS_2 active material, thus endowing it with high specific capacity, good rate capability, as well as excellent cycling stability. Electrochemical measurements show that the FeS_2/rGO composite had a high initial discharge capacity of 1263.2 mAh gg^(-1) at 100 mA gg^(-1) and a high discharge capacity of 344 mAh gg^(-1) at 10 A gg^(-1), demonstrating superior rate performance. After 100 cycles at 100 mA gg^(-1),the discharge capacity remained at 609.5 mAh g^(-1), indicating the excellent cycling stability of the FeS_2/rGO electrode.
文摘In this paper,ZnZnFe_(2)O_(4) nanorods were prepared using Zn/Fe metal organic framework(MOF)as precursors,and ZnZnFe_(2)O_(4)/reduced graphene oxide(rGO)was prepared by hydrothermal method.The morphology and composition of the ZnZnFe_(2)O_(4)/rGO nanocomposite were characterized,and the results showed that the MOF-derived ZnZnFe_(2)O_(4) nanorods are uniformly modified on the surface of rGO.The ZnZnFe_(2)O_(4)/rGO nanocomposite exhibits better SO_(2) gas sensing performance than the single ZnZnFe_(2)O_(4) nanorods at room temperature.The sensing characteristics of single ZnZnFe_(2)O_(4) film sensor,single rGO film sensor and ZnZnFe_(2)O_(4)/rGO composite film sensor at SO_(2)gas concentration(1×10^(-6)-100×10^(-6))were tested.The response of ZnZnFe_(2)O_(4)/rGO composite sensor can reach 18.32%at room temperature.Compared with single ZnZnFe_(2)O_(4) and rGO film sensors,the ZnZnFe_(2)O_(4)/rGO composite sensor has better transient response,good sensitivity and selectivity.In this work,the improvement of the sensor performance is not only due to the p-n heterostructure between ZnZnFe_(2)O_(4) nanorods and rGO nanosheets,but also to the excellent electrical properties of rGO.It provides a new idea for the detection of SO_(2) at room temperature.
基金supported by the National Natural Science Foundation of China(No.61102006)Natural Science Foundation of Shandong Province,China(Nos.ZR2015EM019 and ZR2014EL006)。
文摘Metal oxide semiconductors(MOS)-reduced graphene oxide(rGO)nanocomposites have attracted great attention for room-tempe rature gas sensing applications.The development of novel sensing materials is the key issue for the effective detection of ammoniagas at room temperature.In the present work,the novel reduced graphene oxide(rGO)-In2 O3 nanocubes hybrid materials have been prepared via a simple electrostatic self-assembly strategy.Characterization re sults exhibit that the intimate interfacial contact between In2 O3 nanocubes and the rGO sheets are achieved.Particularly,the as-prepared rGO/In2 O3 nanocomposites displayed high sensitivity,fast response and excellent selectivity towards ammonia(NH3)at room-temperature,which clearly uncovers the merit of structural design and rational integration with rGO sheets.The superior gas sensing performance of the rGO/In2 O3 nanocomposites can be attributed to the synergetic effects of rGO sheets and porous In2 O3 nanocubes.The reported synthesis offers a general approach to rGO/MOS-based semiconductor composites for room-temperature gas sensing applications.
基金supported by the National Natural Science Foundation of China(51577094)the Natural Science Foundation of Jiangsu Province of China(BK20180086)。
文摘As one of prussian blue analogues,Co_(3)[Co(CN)_(6)]_(2) has been explored as a promising anode material for potassium-ion batteries(PIBs) owing to its high potassium storage capacity.Unfortunately,Co_(3)[Co(CN)_(6)]_(2) possesses low electronic conductivity and its structure collapses easily during potassiation and depotassiation,resulting in poor rate performance and cyclic stability.To solve these problems,we develop a facile multi-step method to successfully combine uniformCo_(3)[Co(CN)_(6)]_(2) nanocubes with rGO by C-O-Co bonds.As expected,these chemcial bonds shorten the distance betweenCo_(3)[Co(CN)_(6)]_(2) and rGO to the angstrom meter level,which significantly improve the electronic conductivity ofCo_(3)[Co(CN)_(6)]_(2).Besides,the complete encapsulation ofCo_(3)[Co(CN)_(6)]_(2) nanocubes by rGO endows the structure ofCo_(3)[Co(CN)_(6)]_(2) with high stability,thus withstanding repeated insertion/extraction of potassium-ions without visible morphological and structural changes.Benefiting from the abovementioned structural advantages,the CO3 [Co(CN)6]2/rGO nanocomposite exhibits a high reversible capacity of 400.8 mAh g^(-1) at a current density of 0.1 A g^(-1),an exceptional rate capability of 115.5 mAh g^(-1) at 5 A g^(-1), and an ultralong cycle life of 231.9 mAh g^(-1) at 0.1 A g^(-1) after 1000 cycles.Additionally,the effects of different amounts of rGO and different sizes ofCo_(3)[Co(CN)_(6)]_(2) nanocubes on the potassium storage performance are also studied.This work offers an ideal route to significantly enhance the electrochemical properties of prussian blue analogues.
基金financially supported by the Fundamental Research Funds for the Central Universities (No. 202065001)the National Natural Science Foundation of China (No. 51572249)+1 种基金the National Natural Science Foundation Joint Fund (No. U1806223)the State Key Laboratory of Marine Coatings (GZ-19-0004)。
文摘Considering the high filling ratios,high densities,and narrow absorbing bandwidths of the current electromagnetic wave(EMW) absorbers,in this work,we successfully synthesized a 3 D hierarchical NiCo_(2) O_(4) nanoflowers/reduced graphene oxide(NiCo_(2) O_(4)/RGO) composite foam by a simple method under gentle condition.The NiCo_(2) O_(4) nanoflowers and unique 3 D foam structure are beneficial to the refraction and scattering of EMW,which endows the prepared 3 D foam with highly efficient EMW absorption performance.When the ratio between NiCo_(2) O_(4) and RGO in the foam is 1:1,5% mass fraction of NiCo_(2) O_(4/)RGO foam in paraffin wax can reach a minimum reflection loss(RL_(min)) value of-52.2 dB with a thin thickness merely 2.6 mm.Simultaneously,the effective absorption bandwidth(EAB,RL exceeding-10 dB) is7.04 GHz that covers the whole Ku band(10.96-18 GHz).Moreover,the effects of the thickness of the absorber and the loading ratios of the foam in paraffin wax matrix on the EMW absorption properties are also carefully investigated.The results indicate that the optimum EMW absorption performance of NiCo_(2) O_(4/)RGO can be tuned in different bands.The EMW absorption mechanism is ascribed to the proper impedance matching and larger dielectric and magnetic loss produced by the synergy of NiCo_(2) O_(4) and RGO.Therefore,the NiCo_(2) O_(4/)RGO hybrid foam is ideal candidate to be used as high-efficient EMW absorbers with low filling ratio,light weight,and broad frequency bandwidths.
基金supported by the National Natural Science Foundation of China(Nos.51602281 and 52100014)the Natural Science Foundation of Jiangsu Province(No.BK20180938)the Yangzhou University High-end Talent Support Program and the“Qinglan Project”of Jiangsu Universities。
文摘Bi_(2)O_(2)CO_(3)(BOC)/Bi_(4)O_5Br_(2)(BOB)/reduced graphene oxide(rGO)Z-scheme heterojunction with promising photocatalytic properties was synthesized via a facile one-pot room-temperature method.Ultra-thin nanosheets of BOC and BOB were grown in situ on r GO.The formed 2D/2D direct Z-scheme heterojunction of BOC/BOB with oxygen vacancies(OVs)effectively leads to lower negative electron reduction potential of BOB as well as higher positive hole oxidation potential of BOC,showing improved reduction/oxidation ability.Particularly,rGO is an acceptor of the electrons from the conduction band of BOC.Its dual roles significantly improve the transfer performance of photo-induced charge carriers and accelerate their separation.With layered nanosheet structure,rich OVs,high specific surface area,and increased utilization efficiency of visible light,the multiple synergistic effects of BOC/BOB/rGO can achieve effective generation and separation of the electron-holes,thereby generating more·O_(2)^(-)and h^(+).The photocatalytic reduction efficiency of CO_(2)to CO(12.91μmol/(g·hr))is three times higher than that of BOC(4.18μmol/(g·hr)).Moreover,it also achieved almost 100%removal of Rhodamine B and cyanobacterial cells within 2 hours.
文摘Here,Ag2S nanoparticles on reduced graphene oxide（Ag2S NPs/RGO） nanocomposites with relatively good distribution are synthesized for the first time by conversing Ag NPs/RGO to Ag2S NPs/RGO via a facile hydrothermal sulfurization method.As an noval catalyst for the reduction of 4-nitrophenol（4-NP）,it only takes 5 min for Ag2S NPs/RGO to reduce 98% of 4-NP,and the rate constant of the composites is almost 13 times higher than that of Ag NPs/RGO composites.The high catalytic activity of Ag2S NPs/RGO can be attributed to the following three reasons：（1） Like metal complex catalysts,the Ag2S NPs is also rich with metal center Ag（δ^＋）,with pendant base S（δ） close to it,and thus the Ag and basic S function as the electron-acceptor and proton-acceptor centers,respectively,which facilitates the catalyst reaction;（2）RGO features the high adsorption ability toward 4-NP which provides a high concentration of 4-NP near the Ag2S NPs;and（3） electron transfer from RGO to Ag2S NPs,facilitating the uptake of electrons by 4-NP molecules.
基金provided by Guizhou Provincial Science and Technology Projects for Platform and Talent Team Plan(GCC[2023]007)Fok Ying Tung Education Foundation(171095)National Natural Science Foundation of China(11964006).
文摘Considering the serious electromagnetic wave(EMW)pollution problems and complex application condition,there is a pressing need to amalgamate multiple functionalities within a single substance.However,the effective integration of diverse functions into designed EMW absorption materials still faces the huge challenges.Herein,reduced graphene oxide/carbon foams(RGO/CFs)with two-dimensional/three-dimensional(2D/3D)van der Waals(vdWs)heterostructures were meticulously engineered and synthesized utilizing an efficient methodology involving freeze-drying,immersing absorption,secondary freeze-drying,followed by carbonization treatment.Thanks to their excellent linkage effect of amplified dielectric loss and optimized impedance matching,the designed 2D/3D RGO/CFs vdWs heterostructures demonstrated commendable EMW absorption performances,achieving a broad absorption bandwidth of 6.2 GHz and a reflection loss of-50.58 dB with the low matching thicknesses.Furthermore,the obtained 2D/3D RGO/CFs vdWs heterostructures also displayed the significant radar stealth properties,good corrosion resistance performances as well as outstanding thermal insulation capabilities,displaying the great potential in complex and variable environments.Accordingly,this work not only demonstrated a straightforward method for fabricating 2D/3D vdWs heterostructures,but also outlined a powerful mixeddimensional assembly strategy for engineering multifunctional foams for electromagnetic protection,aerospace and other complex conditions.
基金This study was supported by Korea Hydro&Nuclear Power Co.,Ltd.(No.:2018-Tech-21)the National Research Foundation of Korea(NRF)grant funded by the Korea government MSIT(2019M3E6A1064763).
文摘There have been ever-growing demands to develop advanced electrocatalysts for renewable energy conversion over the past decade.As a promising platform for advanced electrocatalysts,reduced graphene oxide(rGO)has attracted substantial research interests in a variety of electrochemical energy conversion reactions.Its versatile utility is mainly attributed to unique physical and chemical properties,such as high specific surface area,tunable electronic structure,and the feasibility of structural modification and functionalization.Here,a comprehensive discussion is provided upon recent advances in the material preparation,characterization,and the catalytic activity of rGO-based electrocatalysts for various electrochemical energy conversion reactions(water splitting,CO2 reduction reaction,N2 reduction reaction,and O2 reduction reaction).Major advantages of rGO and the related challenges for enhancing their catalytic performance are addressed.
基金financially supported by the National Natural Science Foundation of China (No. 21273080)Guangdong Natural Science Foundation (No. 2014A030311039)
文摘In this study, a new facile preparation method of nanocomposites consisting of graphene oxide and manganese dioxide nanowires（GO/MnO2 NWs） was developed. The morphology, structure and composition of the resulted products were characterized by transmission electron microscopy, X-ray diffraction and N2 adsorption and desorption. The GO/MnO2 nanocomposite was used as an electrode material for non-enzymatic determination of hydrogen peroxide. The proposed sensor exhibits excellent electrocatalytic performance for the determination of hydrogen peroxide in phosphate buffer solution（PBS, pH7） at an applied potential of 0.75 V. The non-enzymatic biosensor for determination of hydrogen peroxide displayed a wide linear range of 4.90 mmol L^-1–4.50 mmol L^-1with a correlation coefficient of 0.9992, a low detection limit of 0.48 mmol L^-1 and a high sensitivity of 191.22μA（mmol L^-1）^-1cm^-2（signal/noise, S/N = 3）. Moreover, the non-enzymatic biosensor shows an excellent selectivity.
基金funded by the Zhengzhou Materials Genome Institute,the National Talents Program of China,and Key Innovation Projects of the Zhengzhou Municipal City of China.
文摘The main bottleneck against industrial utilization of sodium ion batteries(SIBs)is the lack of high-capacity electrodes to rival those of the benchmark lithium ion batteries(LIBs).Here in this work,we have developed an economical method for in situ fabrication of nanocomposites made of crystalline few-layer graphene sheets loaded with ultrafine SnO_(2)nanocrystals,using short exposure of microwave to xerogel of graphene oxide(GO)and tin tetrachloride containing minute catalyzing dispersoids of chemically reduced GO(RGO).The resultant nanocomposites(SnO_(2)@MWG)enabled significantly quickened redox processes as SIB anode,which led to remarkable full anode-specific capacity reaching 538 mAh g^(−1)at 0.05 A g^(−1)(about 1.45 times of the theoretical capacity of graphite for the LIB),in addition to outstanding rate performance over prolonged charge–discharge cycling.Anodes based on the optimized SnO_(2)@MWG delivered stable performance over 2000 cycles even at a high current density of 5 A g^(−1),and capacity retention of over 70.4%was maintained at a high areal loading of 3.4 mg cm^(−2),highly desirable for high energy density SIBs to rival the current benchmark LIBs.
基金supported by Fund of National Key Laboratory of Science and Technology on Advanced Composites in Special Environments(Grant No.6142905192507)Shenzhen Science and Technology Plan Supported Project(Grant No.JCYJ20170413105844696)+1 种基金China Scholarship Council(Grant No.201606125092)Singapore Ministry of Education Academic Research Fund Tier 2(MOE2018-T2-2-178)
文摘Aqueous alkaline battery represents a promising energy storage technology with both high energy density and high power density as rechargeable batteries.However,the low theoretical capacities,kinetics and stability of anode materials have limited their developments and commercializations.In this study,we propose a novel method to produce two-dimensional layered bismuth oxide selenium(Bi_(2)O_(2)Se)and reduced graphene oxide(r GO)composites via a one-step hydrothermal method.The volume change caused by phase change during rapid charging and discharging is significantly reduced and the capacity reaches 263.83 m Ah g^(-1)at a current density of 0.5 A g^(-1).The Bi_(2)O_(2)Se/r GO electrode exhibits excellent cycling stability in which the capacity retention rate is 81.04%after 5000 cycles.More importantly,the Bi_(2)O_(2)Se/r GO nanosheet composite is used as the anode electrode material with MnCo_(2)O_(4.5)@Ni(OH)_(2)as the cathode electrode material in aqueous alkaline battery.When the energy density is 76.16 W h kg^(-1),the power density reaches 308.65 W kg^(-1).At a power density of 10.21 k W kg^(-1),the energy density remains as high as 33.86 W h kg^(-1).The results presented here may advance the understanding of the issues facing the development of aqueous battery anode materials.
基金supported by the Ministry of Education of China (IRT1148)the National Natural Science Foundation of China (51772157 and 21173116)+3 种基金Synergistic Innovation Center for Organic Electronics and Information Displays,Jiangsu Province "Six Talent Peak" (2015-JY-015)Jiangsu Provincial Natural Science Foundation (BK20141424)the Program of Nanjing University of Posts and Telecommunications (NY214088)the Open Research Fund of State Key Laboratory of Bioelectronics of Southeast University (12015010)
文摘Flexible and micro-sized energy conversion/storage components are extremely demanding in portable and multifunctional electronic devices, especially those small,flexible, roll-up and even wearable ones. Here in this paper, a two-step electrochemical deposition method has been developed to coat Ni fibers with reduced graphene oxide and MnO2 subsequently, giving rise to Ni@reduced-graphene-oxide@MnO2 sheath-core flexible electrode with a high areal specific capacitance of 119.4 mF cm^-2 at a current density of 0.5 mA cm^-2 in 1 mol L^-1 Na2SO4 electrolyte. Using polyvinyl alcohol（PVA）-LiCl as a solid state electrolyte, two Ni@reduced-grapheneoxide@Mn02 flexible electrodes were assembled into a freestanding, lightweight, symmetrical fiber-shaped micro-supercapacitor device with a maximum areal capacitance of26.9 mF cm^-2. A high power density of 0.1 W cm^-3 could be obtained when the energy density was as high as0.27 mW h cm^-3. Moreover, the resulting micro-supercapacitor device also demonstrated good flexibility and high cyclic stability. The present work provides a simple, facile and low-cost method for the fabrication of flexible, lightweight and wearable energy conversion/storage micro-devices with a high-performance.
文摘We have demonstrated a facile and efficient strategy for the fabrication of soluble reduced graphene oxide sheets （RGO） and the preparation of titanium oxide （TiO2） nanoparticle-RGO composites using a modified one-step hydrothermal method. It was found that graphene oxide could be easily reduced under solvothermal conditions with ascorbic acid as reductant, with concomitant growth of TiO2 particles on the RGO surface. The TiO2-RGO composite has been thoroughly characterized by Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Microscopy techniques （scanning electron microscopy, atomic force microscopy, and transmission electron microscopy） have been employed to probe the morphological characteristics as well as to investigate the exfoliation of RGO sheets. The TiOR-RGO composite exhibited excellent photocatalysis of hydrogen evolution.
