In order to realize the resource utilization of construction waste,industrial waste slag and silt,this paper used Portland cement,mineral waste residue and phosphogypsum composite to make cementing material(CMPS)with ...In order to realize the resource utilization of construction waste,industrial waste slag and silt,this paper used Portland cement,mineral waste residue and phosphogypsum composite to make cementing material(CMPS)with construction waste recycled aggregate to solidify silt.The mechanical properties of the solidified silt were analyzed by laboratory solidification test and microscopic examination respectively.In order to clarify the mineral composition,microscopic morphology and pore characteristics of the regenerated aggregate and CMPS solidified silt,X-ray diffractometer(XRD),scanning electron microscope(SEM),and nitrogen adsorption pore analyzer(NA)were used to further explore and analyze the regenerated aggregate and CMPS solidified silt effectively,and further reveal the internal mechanism of the regenerated aggregate and CMPS solidified silt effectively.The experimental results show that the strength of Portland cement-mineral waste residue phosphogypsum terpolymer system curing agent increases by 107.34%than that of single Port-land cement solidified silt at 56 d,and the strength of CMPS solidified silt increases by 25.68%under the action of recycled aggregate framework.The curing age and moisture content of the silt have a high correlation with the strength of the solidified silt.Therefore,the influence law of the above two influencing factors on its mechanical properties is further explored and the strength prediction is made.The microscopic test results show that,based on the hydration of Port-land cement and the pozzolans reaction of mineral waste residue,the solidified system has produced calcium silicate hydrate gel and ettringite crystals with gelatinous properties,which helps to fill the pores and form a denser structure.展开更多
Accurately predicting the compressive strength of recycled aggregate concrete(RAC)incorporating supplementary cementitious materials(SCMs)remains a critical challenge due to the heterogeneous nature of recycled aggreg...Accurately predicting the compressive strength of recycled aggregate concrete(RAC)incorporating supplementary cementitious materials(SCMs)remains a critical challenge due to the heterogeneous nature of recycled aggregates(RA)and the complex interactions among multiple binder constituents.This study advances the field by developing the most extensive and rigorously preprocessed database to date,which comprises 1243 RAC mixtures containing silica fume,fly ash,and ground-granulated blast-furnace slag.A hybrid,domain-informed machine-learning framework was then proposed,coupling optimized Extreme Gradient Boosting(XGBost)with civil engineering expertise to capture the complex chemical and microstructural mechanisms that govern RAC performance.Systematic grid-search optimization(n_estimators=50,learning_rate=0.2,max_depth=7)produced superior predictive accuracy(training R^(2)=0.9923,testing R^(2)=0.937;MAE=2.378 MPa;RMSE=3.591 MPa),which outperformed Extra Trees,Light Gradient Boosting,and traditional regressors.Beyond prediction,model interpretability was achieved using Shapley additive explanations and partial dependence analyses,which revealed curing age as the dominant strength driver,while water-to-binder ratio and recycled aggregate water absorption exhibited strong negative influences.Three-dimensional interaction plots further demonstrated how optimal superplasticizer dosages reduce the strength loss associated with high recycled aggregate content.In summary,this work provides a novel,explainable,and data-driven framework that achieves high predictive accuracy with mechanistic transparency and offers a powerful,interpretable tool for the design and optimization of sustainable RAC mixtures.展开更多
To examine the influences of waste polypropylene fiber(PPF)on the strength and internal pore structure of recycled aggregate concrete incorporating iron ore tailings,both the cubic compressive strength and axial compr...To examine the influences of waste polypropylene fiber(PPF)on the strength and internal pore structure of recycled aggregate concrete incorporating iron ore tailings,both the cubic compressive strength and axial compressive strength of the concrete were measured.Additionally,the microstructure was analyzed using scanning electron microscopy.The evolution of pore structure parameters,including pore size distribution,pore type distribution,and nuclear magnetic resonance spectral area in the concrete,was investigated through nuclear magnetic resonance(NMR)analysis.A model correlating the concrete's pore structure with its macroscopic performance was subsequently developed based on fractal theory.The results demonstrate that an appropriate amount of PPF created a bridging effect that decelerated the progression of macro cracks,enhanced the ductility of the concrete's failure mode,and increased both cubic compressive strength and axial compressive strength,with the most effective dosage being approximately 0.6%.An appropriate amount of PPF(ranging from 0.3%to 0.6%)facilitated the formation of harmless pores and shifted the pore size distribution towards medium and small sizes.Specifically,a fiber content of 0.6%resulted in the most significant reduction in the T2 spectral area.Furthermore,the pore structure of concrete exhibits distinct fractal characteristics.As the PPF content increased,the fractal dimension initially rose and then declined,demonstrating a strong correlation with the mechanical properties.展开更多
The degradation performance of pervious concrete containing TiO_(2)/LDHs-loaded recycled aggregates for NO gas was analyzed using a gas phase catalytic degradation test device,simulating different environmental condit...The degradation performance of pervious concrete containing TiO_(2)/LDHs-loaded recycled aggregates for NO gas was analyzed using a gas phase catalytic degradation test device,simulating different environmental conditions such as load,ambient temperature,and illumination intensity,which provides theoretical support for practical engineering.The experimental results indicate that when the ambient temperature is controlled at 25℃and the illumination intensity is 30 W/m^(2),the sample prepared by soaking recycled aggregates in a 0.8%TiO_(2)/LDHs suspension exhibits the highest photocatalytic degradation rate for NO gas,reaching 72.54%.Further investigation on the influence of environmental temperature reveals that,at 25℃,the maximum photocatalytic degradation rate for NO gas is 72.9%.Moreover,at an illumination intensity of 40 W/m^(2),the maximum photocatalytic degradation rate for NO gas is 87.08%.Additionally,after three repeated photocatalytic tests,the sample demonstrates good stability,with a photocatalytic degradation rate of 58%.The nitrogen content in the eluent obtained from soaking the sample was determined to be 0.0022 mol/L,with a recovery rate of 80%.The adsorption experiment demonstrates that the sample exhibits a favorable adsorption effect on nitrate ions,reaching a maximum of 56.8%.展开更多
Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may ...Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may exacerbate these limitations.To address these issues,this study introduced a novel cement-stabilized permeable recycled aggregate material.A total of 162 beam specimens prepared with nine different levels of cement-aggregate ratio were tested to evaluate their permeability,bending load,and bending fatigue life.The experimental results indicate that increasing the content of recycled aggregates led to a reduction in both permeability and bending load.Additionally,the inclusion of recycled aggregates diminished the energy dissipation capacity of the specimens.These findings were used to establish a robust relationship between the initial damage in cement-stabilized permeable recycled aggregate material specimens and their fatigue life,and to propose a predictive model for their fatigue performance.Further,a method for assessing fatigue damage based on the evolution of fatigue-induced strain and energy dissipation was developed.The findings of this study provide valuable insights into the mechanical behavior and fatigue performance of cement-stabilized permeable recycled aggregate materials,offering guidance for the design of low-carbon-emission,permeable,and durable roadways incorporating recycled aggregates.展开更多
Recycled aggregates(RA)are frequently obtained from various unknown sources,which caused variation in properties among recycled aggregates concrete(RAC).This paper investigated the macro and microscopic properties of ...Recycled aggregates(RA)are frequently obtained from various unknown sources,which caused variation in properties among recycled aggregates concrete(RAC).This paper investigated the macro and microscopic properties of RAC prepared with RAs originated from different parent concretes with 90-day strength ranging from 30 MPa to 100 MPa.These parent concretes were prepared in advance and crushed to produce RA of distinct qualities.The attached mortar content can reach up to 69%in the concrete with highest strength grade.The microscopic investigation on different RAC was conducted with the X-ray Micro-Computed Tomography scanning technique and image process.Experimental results showed that the properties of RA derived from various parent concrete varied because of the amount of residual mortar.The development of mechanical properties and chloride-ion penetration of RACs all followed a binomial trend with the strength grades of the parent concrete because of the different quantity and quality of RAs.展开更多
Modified recycled aggregates were prepared with three different cement-admixture grouts. The physical properties, such as water absorption, apparent density, crushing index, slump and compressive strength of the recyc...Modified recycled aggregates were prepared with three different cement-admixture grouts. The physical properties, such as water absorption, apparent density, crushing index, slump and compressive strength of the recycled aggregate and the recycled concretes were tested, and the tests for the compression-deformation behavior of the concretes were also performed. The experimental results show that the cement-Kim powder grout is satisfied for enhancing the recycled concrete, and the modification of the recycled aggregate with the grouts can improve the toughness and the deformation ability of the concretes.展开更多
The effects of fly ash on the compressive strength, pore size distribution and chloride-ion penetration of recycled aggregate concrete were investigated. Two series of concrete mb：tures were prepared. The concrete mi...The effects of fly ash on the compressive strength, pore size distribution and chloride-ion penetration of recycled aggregate concrete were investigated. Two series of concrete mb：tures were prepared. The concrete mixtures in series I had a water-to-binder ratio and a cement content of 0.55 and 410 kg/ m^3 , respectively. The concrete rnixtures in series II had a water-to-binder ratio and a cement content of 0.45 and 400 kg/ ml respectively. Recycled aggregate was ased as 20% , 50% , and 100% replacements of natural coarse aggregate in the concrete mixtures in both series. In cutdition, fly ash was used as 0% , 25% and 35% by weight replacements of cement. The results show that the compressive strengths of the concrete decreased as the recycled aggregate and the fly ash contents increased. The total porosity and average porosity diameter of the concrete increased us the recycled aggregate content increased. Furtherrruore , an increase in the recycled aggregate content decreased the resistance to chloride ion penetration. Nevertheless, the replacement of cement by 25% fly ush improved the resistance to chloride ion penetration and pore diameters and reduced the total porosity of the recycled aggregate concrete.展开更多
The characteristics of surface appearances,mass loss,relative dynamic modulus of elasticity and strength loss of different recycled aggregate concretes(RAC) exposed to freeze-thaw cycles were analyzed.It was found tha...The characteristics of surface appearances,mass loss,relative dynamic modulus of elasticity and strength loss of different recycled aggregate concretes(RAC) exposed to freeze-thaw cycles were analyzed.It was found that the freeze-thaw resistance of RAC could be determined by the recycled aggregate compositions and admixtures.Both the saturation degree and the air void structure were the key factors influencing the freeze-thaw damage on concrete.Some major proposed freeze-thaw deterioration mechanisms were utilized to interpret the freeze-thaw damage on recycled aggregate concrete.Meanwhile,some potential measures to enhance the freeze-thaw resistance of concrete were summarized and discussed.展开更多
The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this ...The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this test. The variations of relative dynamic elastic modulus Erd and water-soluble SO2-4 contents in RAC were used to evaluate degradation progress. The changes in mineral products and microstructures of interior concrete were investigated by means of X-ray diffraction(XRD), the environmental scanning electron microscope(ESEM) and X-ray computed tomography(X-CT). The results indicate that flexural loading accelerates the degradation of RAC under sulfate attack and wetting-drying cycles by expediting the transmission of SO2-4 into interior concrete. Furthermore, the accelerated effect of flexural loading is more obvious with the increase of stress ratio, that is because higher stress ratios can accelerate the extension of microcracks and generate more channels for the transmission of SO2-4. Also, more expansive products(gypsum and ettringite) are generated by the reaction of Ca(OH)2 with SO2-4, which can further accelerate the degradation of RAC.展开更多
The viability of using polypropylene fibers(PPF) in concrete was largely studied. Yet, few of the existing research studies investigated the effects of PPF on the properties of concrete containing recycled concrete ag...The viability of using polypropylene fibers(PPF) in concrete was largely studied. Yet, few of the existing research studies investigated the effects of PPF on the properties of concrete containing recycled concrete aggregate(RCA). Mixes with different RCA replacement ratios and different PPF content were designed and tested. The test results showed that the addition of PPF did not change significantly the compressive strength and the density of the concrete, but slightly decreased its modulus of elasticity and Poisson’s ratio. The drop in the splitting tensile strength and the flexural strength due to RCA inclusions was to a large extent compensated by the PPF addition. The water absorption decreased and the percent voids increased with increased PPF addition. Correlations between the RCA content, the PPF content and the properties of concrete were studied. Useful regression models were proposed to predict the properties of concrete in relevant ranges of RCA and PPF content.展开更多
Phosphorous slag （PHS）, ground granulated blast-furnace slag （GGBS） and fly ash （FA） were used as replacements of Portland cement to modify the microstruc^xe of recycled aggregate concrete （RAC）. A new manufac...Phosphorous slag （PHS）, ground granulated blast-furnace slag （GGBS） and fly ash （FA） were used as replacements of Portland cement to modify the microstruc^xe of recycled aggregate concrete （RAC）. A new manufacturing method named ＂W3T4＂ was proposed to improve the performances of interracial transition zone （ITZ） between recycled aggregate and mortar. The mechanical properties and the durability of RAC were tested, which show that this new manufacturing method improves the properties of RAC, and the GGBS with finest size makes a great contribution to the performance of RAC due to its better filling effect and much earlier pozzolanic reaction. Combined with GGBS, the effects of PHS on the retardation of setting time can be alleviated and the synergistic effect helps to make a more compact RAC. For the RAC with 25% of the recycled aggregate （RA） replacement and 10% PHS ＋ 10% GGBS additives, the compressive strength increases by 25.4%, but the permeability decreases by 64.3% with respect to the reference concrete made with nature aggregates. The micro-mechanisms of these improvements were investigated by the scanning electron microscope （SEM）. The SEM images show that the new manufacturing method, adding superfine pozzolanic powders and super-plasticizer benefits, makes a much denser ITZ in RAC.展开更多
A recycled aggregate(RA)was prepared by crushing and sieving demolished discarded concrete pavements and was subsequently tested and analyzed to determine its various physical properties.On this basis,pervious concret...A recycled aggregate(RA)was prepared by crushing and sieving demolished discarded concrete pavements and was subsequently tested and analyzed to determine its various physical properties.On this basis,pervious concrete(PC)mix proportions were designed.Coarse RA particles with sizes of 5–10 and 10–20 mm were selected.Concrete specimens were prepared with a water–cement ratio of 0.3,an aggregate–cement ratio of 4.5,the substitute rates of RA with 0,25%,50%,75%and a single-/double-gap-graded RA mix(mass ratio of particles with sizes of 5–10 mm to particles with sizes of 10–20 mm:1:1,1:2,2:1,2:3 and 3:2).Various properties of the RA-containing PC(RPC)were determined by analyzing the compressive strength,splitting tensile strength,effective porosity,permeation coefficient and impact and abrasion resistance of the specimens.The results showed the following:The density of the RPC decreased with an increasing RA replacement ratio.The density of the RPC prepared with a double-gapgraded RA mix was lower than that prepared with a single-gap-graded RA(particle size:10–20 mm)mix.The permeation coefficient of the RPC increased with increasing porosity.The splitting tensile strength of the RPC was positively correlated with its compressive strength.The compressive strength of the RPC decreased with increasing porosity.The regression analysis showed that the impact and abrasion resistance of the RPC increased with increasing compressive strength.In addition,all of the RPC specimens met the strength and permeation requirements.This study can provide theoretical support for the application of RPC.展开更多
The aim of this study is to improve the bond performance of basalt fiber reinforced polymer(BFRP)bars and recycled aggregate concrete(RAC)after being exposed to high temperatures.The bond behavior(failure modes,bond s...The aim of this study is to improve the bond performance of basalt fiber reinforced polymer(BFRP)bars and recycled aggregate concrete(RAC)after being exposed to high temperatures.The bond behavior(failure modes,bond strength,bond stress-slip curves)between BFRP bars and hybrid fiber recycled aggregate concrete(HFRAC)after being exposed to temperatures ranging from 20℃up to 500℃was studied by using pull-out tests.The effect of high temperatures on mechanical properties of concrete(compressive strength,splitting tensile strength)and tensile strength of BFRP bars was also investigated.The bond strength decreased as the temperature increased and the drop of bond strength between RAC and BFRP bar was larger than that between HFRAC and BFRP bar.As the temperature rises,the key factor affecting the bond strength was gradually transformed from concrete strength to BFRP bar strength.The relationship between bond stress and slip in the dimensionless bond stress-slip ascending section was established,which was in good agreement with the experimental results.展开更多
The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results i...The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results indicate that the peak stress, peak strain, secant modulus of the peak point and original point increase with the strength grade of RAC enhanced. On the contrary, the residual stress of RAC decreases with the strength grade enhancing, and the failure of RAC is often broken at the interface between the recycled aggregate and the mortar matrix. Finally, the constitutive model of stress-strain model of RAC has been constituted, and the results from the constitutive model of stress-strain meet the experiment results very well.展开更多
Based on six-degree-of-freedom three-dimensional shaking table tests, the seismic response of a recycled aggregate concrete （RAC） frame was obtained. The analysis results indicate that the maximum story shear force ...Based on six-degree-of-freedom three-dimensional shaking table tests, the seismic response of a recycled aggregate concrete （RAC） frame was obtained. The analysis results indicate that the maximum story shear force and overturning moment reduce proportionally along the height of the model under the same earthquake wave. The story shear force, base shear coefficient and overturning moment of the structure increase progressively as the acceleration amplitude increases. The base shear coefficient is primarily controlled by the peak ground acceleration （PGA）. The relationships between the PGA and the shear coefficient as well as between the PGA and the dynamic amplification factor are obtained by mathematical fitting. The dynamic amplification factor decreases rapidly at the elastic-plastic stage, but decreases slowly with the development of the elastic-plasticity stage. The results show that the RAC frame structure has reasonable deformability when compared with natural aggregate concrete frame structures. The maximum inter-story drift ratios of the RAC frame model under frequent and rare intensity 8 test phases are 1/266 and 1/29, respectively, which are larger than the allowable value of 1/500 and 1/50 according to Chinese seismic design requirements. Nevertheless, the RAC frame structure does not collapse under base excitations with PGAs from 0.066 g up to 1.170 g.展开更多
During the modernization or rehabilitation activity,the demolished structural waste causes large soil pollution and unavailability of natural aggregate is the big concern for the construction industry.Therefore,this m...During the modernization or rehabilitation activity,the demolished structural waste causes large soil pollution and unavailability of natural aggregate is the big concern for the construction industry.Therefore,this manuscript deals with the Composite Steel Circular Column(CSCC)with Recycled Aggregate concrete(RAC)as infill is partly used,with the replacement of 25%and 50%in M30 grade of Concrete.And internal reinforcement steel is fully replaced by rolled steel tubes(circular and square)with varied thickness,ISA-unequal angle.Around 14 specimens are cast and examined under axial load for analysis of the deflection characteristics,the load-bearing capacity along with its buckling behavior.The experimental values are estimated through LVDT(linear variable differential transducer)at 3-phase.The curve of load-deflection is drawn with the load pattern.From the date interpretation,it is found column made of 50%-RAC has more than 25%-RAC.展开更多
Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the c...Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the cement by mass with a water-cement ratio of 0.30 on the properties of Recycled Aggregate Pervious Concrete(RAPC)were studied.Following this,based on the Grey relational-Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)optimization method,the strength,permeability,abrasion loss rate,and material costs of RAPC were adopted as evaluation indices to establish a mix proportion optimization model.The results show that the increase of water-cement ratio and fly ash replacement level of RAPC leads to decreased compres-sive strength while an increase in the permeability and abrasion loss rate.According to test results based on the optimal model 0.30 was identified as the best mix proportion.In addition,ecological-economic analysis of RAPC raw materials was carried out by comparing different natural aggregates.The results of EE(embodied energy)and ECO 2e(embodied CO_(2) emission)pointed out that the combination of recycled aggregate and fly ash leads to sig-nificant ecological and economic benefits.展开更多
The effect of carbonation treatment and mixing method on the mechanical properties and interfacial transition zone（ITZ） properties of recycled aggregate concrete（RAC） was investigated. Properties of recycled concr...The effect of carbonation treatment and mixing method on the mechanical properties and interfacial transition zone（ITZ） properties of recycled aggregate concrete（RAC） was investigated. Properties of recycled concrete aggregate（RCA） were tested firstly. Then, five types of concretes were made and slump of fresh concrete was measured immediately after mixing. Compressive strength and splitting tensile strength of hardened concrete were measured at 28 d. Meanwhile, the microstructure of RAC was analyzed by backscattered electron（BSE） image. It was found that the water absorption ratio of carbonated recycled concrete aggregate（CRCA） was much lower when compared to the untreated RCA. Comparatively, the apparent density of CRCA was not significantly modified. The concrete strength results indicate that the mix CRAC-2 prepared with CRCA by adopting two-stage mixing approach shows the highest compressive strength value compared to the other mixes. The microstructural analysis demonstrate that the mix CRAC-2 has a much denser old ITZ than the untreated RAC because of the chemical reaction between CO2 and the hydration products of RCA. This study confirms that the ITZ microstructure of RAC can be efficiently modified by carbonation treatment of RCA and encourages broadening the application of construction and demolition wastes.展开更多
The development of recycled aggregate concrete(RAC)provides a new approach to limiting the waste of natural resources.In the present study,the mechanical properties and deformability of RACs were improved by adding ba...The development of recycled aggregate concrete(RAC)provides a new approach to limiting the waste of natural resources.In the present study,the mechanical properties and deformability of RACs were improved by adding basalt fibers(BFs)and using external restraints,such as a fiber-reinforced polymer(FRP)jacket or a PVC pipe.Samples were tested under axial compression.The results showed that RAC(50%replacement of aggregate)containing 0.2%BFs had the best mechanical properties.Using either BFs or PVC reinforcement had a slight effect on the loadbearing capacity and mode of failure.With different levels of BFs,the compressive strengths of the specimens reinforced with 1-layer and 3-layer basalt fiber reinforced polymer(BFRP)increased by 6.7%–10.5%and 16.5%–23.7%,respectively,and the ultimate strains increased by 48.5%–80.7%and 97.1%–141.1%,respectively.The peak stress of the 3-layer BFRP-PVC increased by 42.2%,and the ultimate strain improved by 131.3%,relative to the control.This reinforcement combined the high tensile strength of BFRP,which improved the post-peak behavior,and PVC,which enhanced the structural durability.In addition,to investigate the influence of the various constraints on compressive behavior,the stress-strain response was analyzed.Based on the analysis of experimental results,a peak stress-strain model and an amended ultimate stress-strain model were proposed.The models were verified as well;the result showed that the predictions from calculations are generally consistent with the experimental data(error within 10%).The results of this study provide a theoretical basis and reference for future applications of fiber-reinforced recycled concrete.展开更多
基金Funded by the Jiangsu Province Industry University Research Project(No.BY20231142)the Yangzhou Science&Technology Program(No.YZ2023061)the Zhenjiang Science&Technology Program(No.SH2022018)。
文摘In order to realize the resource utilization of construction waste,industrial waste slag and silt,this paper used Portland cement,mineral waste residue and phosphogypsum composite to make cementing material(CMPS)with construction waste recycled aggregate to solidify silt.The mechanical properties of the solidified silt were analyzed by laboratory solidification test and microscopic examination respectively.In order to clarify the mineral composition,microscopic morphology and pore characteristics of the regenerated aggregate and CMPS solidified silt,X-ray diffractometer(XRD),scanning electron microscope(SEM),and nitrogen adsorption pore analyzer(NA)were used to further explore and analyze the regenerated aggregate and CMPS solidified silt effectively,and further reveal the internal mechanism of the regenerated aggregate and CMPS solidified silt effectively.The experimental results show that the strength of Portland cement-mineral waste residue phosphogypsum terpolymer system curing agent increases by 107.34%than that of single Port-land cement solidified silt at 56 d,and the strength of CMPS solidified silt increases by 25.68%under the action of recycled aggregate framework.The curing age and moisture content of the silt have a high correlation with the strength of the solidified silt.Therefore,the influence law of the above two influencing factors on its mechanical properties is further explored and the strength prediction is made.The microscopic test results show that,based on the hydration of Port-land cement and the pozzolans reaction of mineral waste residue,the solidified system has produced calcium silicate hydrate gel and ettringite crystals with gelatinous properties,which helps to fill the pores and form a denser structure.
基金supported by the Ongoing Research Funding Program(Grant No.ORFT-2025-025-6)at King Saud University,Riyadh,Saudi Arabia.
文摘Accurately predicting the compressive strength of recycled aggregate concrete(RAC)incorporating supplementary cementitious materials(SCMs)remains a critical challenge due to the heterogeneous nature of recycled aggregates(RA)and the complex interactions among multiple binder constituents.This study advances the field by developing the most extensive and rigorously preprocessed database to date,which comprises 1243 RAC mixtures containing silica fume,fly ash,and ground-granulated blast-furnace slag.A hybrid,domain-informed machine-learning framework was then proposed,coupling optimized Extreme Gradient Boosting(XGBost)with civil engineering expertise to capture the complex chemical and microstructural mechanisms that govern RAC performance.Systematic grid-search optimization(n_estimators=50,learning_rate=0.2,max_depth=7)produced superior predictive accuracy(training R^(2)=0.9923,testing R^(2)=0.937;MAE=2.378 MPa;RMSE=3.591 MPa),which outperformed Extra Trees,Light Gradient Boosting,and traditional regressors.Beyond prediction,model interpretability was achieved using Shapley additive explanations and partial dependence analyses,which revealed curing age as the dominant strength driver,while water-to-binder ratio and recycled aggregate water absorption exhibited strong negative influences.Three-dimensional interaction plots further demonstrated how optimal superplasticizer dosages reduce the strength loss associated with high recycled aggregate content.In summary,this work provides a novel,explainable,and data-driven framework that achieves high predictive accuracy with mechanistic transparency and offers a powerful,interpretable tool for the design and optimization of sustainable RAC mixtures.
基金Funded by the Natural Science Foundation of Shaanxi Province(No.2023-JC-QN-0553)。
文摘To examine the influences of waste polypropylene fiber(PPF)on the strength and internal pore structure of recycled aggregate concrete incorporating iron ore tailings,both the cubic compressive strength and axial compressive strength of the concrete were measured.Additionally,the microstructure was analyzed using scanning electron microscopy.The evolution of pore structure parameters,including pore size distribution,pore type distribution,and nuclear magnetic resonance spectral area in the concrete,was investigated through nuclear magnetic resonance(NMR)analysis.A model correlating the concrete's pore structure with its macroscopic performance was subsequently developed based on fractal theory.The results demonstrate that an appropriate amount of PPF created a bridging effect that decelerated the progression of macro cracks,enhanced the ductility of the concrete's failure mode,and increased both cubic compressive strength and axial compressive strength,with the most effective dosage being approximately 0.6%.An appropriate amount of PPF(ranging from 0.3%to 0.6%)facilitated the formation of harmless pores and shifted the pore size distribution towards medium and small sizes.Specifically,a fiber content of 0.6%resulted in the most significant reduction in the T2 spectral area.Furthermore,the pore structure of concrete exhibits distinct fractal characteristics.As the PPF content increased,the fractal dimension initially rose and then declined,demonstrating a strong correlation with the mechanical properties.
基金Funded by the National Natural Science Foundation of China(No.52478281)the Natural Science Foundation of Zhejiang Province(No.LZ22E080003)the Science and Technology Project of Zhejiang Provincial Department of Transport(No.202225)。
文摘The degradation performance of pervious concrete containing TiO_(2)/LDHs-loaded recycled aggregates for NO gas was analyzed using a gas phase catalytic degradation test device,simulating different environmental conditions such as load,ambient temperature,and illumination intensity,which provides theoretical support for practical engineering.The experimental results indicate that when the ambient temperature is controlled at 25℃and the illumination intensity is 30 W/m^(2),the sample prepared by soaking recycled aggregates in a 0.8%TiO_(2)/LDHs suspension exhibits the highest photocatalytic degradation rate for NO gas,reaching 72.54%.Further investigation on the influence of environmental temperature reveals that,at 25℃,the maximum photocatalytic degradation rate for NO gas is 72.9%.Moreover,at an illumination intensity of 40 W/m^(2),the maximum photocatalytic degradation rate for NO gas is 87.08%.Additionally,after three repeated photocatalytic tests,the sample demonstrates good stability,with a photocatalytic degradation rate of 58%.The nitrogen content in the eluent obtained from soaking the sample was determined to be 0.0022 mol/L,with a recovery rate of 80%.The adsorption experiment demonstrates that the sample exhibits a favorable adsorption effect on nitrate ions,reaching a maximum of 56.8%.
基金Project(2024JJ2073)supported by the Science Fund for Distinguished Young Scholars of Hunan Province,ChinaProjects(2023YFC3807205,2019YFC1904704)+4 种基金supported by the National Key R&D Program of ChinaProject(52178443)supported by the National Natural Science Foundation of ChinaProject(2024ZZTS0109)supported by Fundamental Research Funds for the Central Universities of Central South University,China。
文摘Permeable roads generally exhibit inferior mechanical properties and shorter service life than traditional dense-graded/impermeable roads.Furthermore,the incorporation of recycled aggregates in their construction may exacerbate these limitations.To address these issues,this study introduced a novel cement-stabilized permeable recycled aggregate material.A total of 162 beam specimens prepared with nine different levels of cement-aggregate ratio were tested to evaluate their permeability,bending load,and bending fatigue life.The experimental results indicate that increasing the content of recycled aggregates led to a reduction in both permeability and bending load.Additionally,the inclusion of recycled aggregates diminished the energy dissipation capacity of the specimens.These findings were used to establish a robust relationship between the initial damage in cement-stabilized permeable recycled aggregate material specimens and their fatigue life,and to propose a predictive model for their fatigue performance.Further,a method for assessing fatigue damage based on the evolution of fatigue-induced strain and energy dissipation was developed.The findings of this study provide valuable insights into the mechanical behavior and fatigue performance of cement-stabilized permeable recycled aggregate materials,offering guidance for the design of low-carbon-emission,permeable,and durable roadways incorporating recycled aggregates.
基金This research was funded by the National Natural Science Foundation of China[Grant Number 51708419].
文摘Recycled aggregates(RA)are frequently obtained from various unknown sources,which caused variation in properties among recycled aggregates concrete(RAC).This paper investigated the macro and microscopic properties of RAC prepared with RAs originated from different parent concretes with 90-day strength ranging from 30 MPa to 100 MPa.These parent concretes were prepared in advance and crushed to produce RA of distinct qualities.The attached mortar content can reach up to 69%in the concrete with highest strength grade.The microscopic investigation on different RAC was conducted with the X-ray Micro-Computed Tomography scanning technique and image process.Experimental results showed that the properties of RA derived from various parent concrete varied because of the amount of residual mortar.The development of mechanical properties and chloride-ion penetration of RACs all followed a binomial trend with the strength grades of the parent concrete because of the different quantity and quality of RAs.
文摘Modified recycled aggregates were prepared with three different cement-admixture grouts. The physical properties, such as water absorption, apparent density, crushing index, slump and compressive strength of the recycled aggregate and the recycled concretes were tested, and the tests for the compression-deformation behavior of the concretes were also performed. The experimental results show that the cement-Kim powder grout is satisfied for enhancing the recycled concrete, and the modification of the recycled aggregate with the grouts can improve the toughness and the deformation ability of the concretes.
基金Funded by the Environment and Conservation Fund, the WooWheelock Green Fund andthe Hong Kong Polytechnic University
文摘The effects of fly ash on the compressive strength, pore size distribution and chloride-ion penetration of recycled aggregate concrete were investigated. Two series of concrete mb：tures were prepared. The concrete mixtures in series I had a water-to-binder ratio and a cement content of 0.55 and 410 kg/ m^3 , respectively. The concrete rnixtures in series II had a water-to-binder ratio and a cement content of 0.45 and 400 kg/ ml respectively. Recycled aggregate was ased as 20% , 50% , and 100% replacements of natural coarse aggregate in the concrete mixtures in both series. In cutdition, fly ash was used as 0% , 25% and 35% by weight replacements of cement. The results show that the compressive strengths of the concrete decreased as the recycled aggregate and the fly ash contents increased. The total porosity and average porosity diameter of the concrete increased us the recycled aggregate content increased. Furtherrruore , an increase in the recycled aggregate content decreased the resistance to chloride ion penetration. Nevertheless, the replacement of cement by 25% fly ush improved the resistance to chloride ion penetration and pore diameters and reduced the total porosity of the recycled aggregate concrete.
基金Funded by the National Key Research and Development Program of China during the“13th Five-Year Plan”(No.2018 YFD1101001)。
文摘The characteristics of surface appearances,mass loss,relative dynamic modulus of elasticity and strength loss of different recycled aggregate concretes(RAC) exposed to freeze-thaw cycles were analyzed.It was found that the freeze-thaw resistance of RAC could be determined by the recycled aggregate compositions and admixtures.Both the saturation degree and the air void structure were the key factors influencing the freeze-thaw damage on concrete.Some major proposed freeze-thaw deterioration mechanisms were utilized to interpret the freeze-thaw damage on recycled aggregate concrete.Meanwhile,some potential measures to enhance the freeze-thaw resistance of concrete were summarized and discussed.
基金The National Natural Science Foundation of China(No.51578141)the Major State Basic Research Development Program of China(No.2015CB655102)China-Japanese Research Cooperative Program-Ministry of Science and Technology in China(No.2016YFE0118200)
文摘The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this test. The variations of relative dynamic elastic modulus Erd and water-soluble SO2-4 contents in RAC were used to evaluate degradation progress. The changes in mineral products and microstructures of interior concrete were investigated by means of X-ray diffraction(XRD), the environmental scanning electron microscope(ESEM) and X-ray computed tomography(X-CT). The results indicate that flexural loading accelerates the degradation of RAC under sulfate attack and wetting-drying cycles by expediting the transmission of SO2-4 into interior concrete. Furthermore, the accelerated effect of flexural loading is more obvious with the increase of stress ratio, that is because higher stress ratios can accelerate the extension of microcracks and generate more channels for the transmission of SO2-4. Also, more expansive products(gypsum and ettringite) are generated by the reaction of Ca(OH)2 with SO2-4, which can further accelerate the degradation of RAC.
基金funded by the National Council for Scientific Research in Lebanon (CNRS - Lebanon)
文摘The viability of using polypropylene fibers(PPF) in concrete was largely studied. Yet, few of the existing research studies investigated the effects of PPF on the properties of concrete containing recycled concrete aggregate(RCA). Mixes with different RCA replacement ratios and different PPF content were designed and tested. The test results showed that the addition of PPF did not change significantly the compressive strength and the density of the concrete, but slightly decreased its modulus of elasticity and Poisson’s ratio. The drop in the splitting tensile strength and the flexural strength due to RCA inclusions was to a large extent compensated by the PPF addition. The water absorption decreased and the percent voids increased with increased PPF addition. Correlations between the RCA content, the PPF content and the properties of concrete were studied. Useful regression models were proposed to predict the properties of concrete in relevant ranges of RCA and PPF content.
基金Project(51178417)supported by the National Natural Science Foundation of ChinaProject(2012R10025)supported by the Qianjiang Talent Plan of Zhejiang Province,China+2 种基金Project(2012HY006B)supported by the Marine Cross-Guide Research Funds of Zhejiang University,ChinaProject(2013FZA4015)supported by the Fundamental Research Funds for the Central Universities,ChinaProject supported by the Department of Construction of Zhejiang Province,China
文摘Phosphorous slag （PHS）, ground granulated blast-furnace slag （GGBS） and fly ash （FA） were used as replacements of Portland cement to modify the microstruc^xe of recycled aggregate concrete （RAC）. A new manufacturing method named ＂W3T4＂ was proposed to improve the performances of interracial transition zone （ITZ） between recycled aggregate and mortar. The mechanical properties and the durability of RAC were tested, which show that this new manufacturing method improves the properties of RAC, and the GGBS with finest size makes a great contribution to the performance of RAC due to its better filling effect and much earlier pozzolanic reaction. Combined with GGBS, the effects of PHS on the retardation of setting time can be alleviated and the synergistic effect helps to make a more compact RAC. For the RAC with 25% of the recycled aggregate （RA） replacement and 10% PHS ＋ 10% GGBS additives, the compressive strength increases by 25.4%, but the permeability decreases by 64.3% with respect to the reference concrete made with nature aggregates. The micro-mechanisms of these improvements were investigated by the scanning electron microscope （SEM）. The SEM images show that the new manufacturing method, adding superfine pozzolanic powders and super-plasticizer benefits, makes a much denser ITZ in RAC.
基金This study was funded by the National key research and development program fund project(No.2018YFC0406803).
文摘A recycled aggregate(RA)was prepared by crushing and sieving demolished discarded concrete pavements and was subsequently tested and analyzed to determine its various physical properties.On this basis,pervious concrete(PC)mix proportions were designed.Coarse RA particles with sizes of 5–10 and 10–20 mm were selected.Concrete specimens were prepared with a water–cement ratio of 0.3,an aggregate–cement ratio of 4.5,the substitute rates of RA with 0,25%,50%,75%and a single-/double-gap-graded RA mix(mass ratio of particles with sizes of 5–10 mm to particles with sizes of 10–20 mm:1:1,1:2,2:1,2:3 and 3:2).Various properties of the RA-containing PC(RPC)were determined by analyzing the compressive strength,splitting tensile strength,effective porosity,permeation coefficient and impact and abrasion resistance of the specimens.The results showed the following:The density of the RPC decreased with an increasing RA replacement ratio.The density of the RPC prepared with a double-gapgraded RA mix was lower than that prepared with a single-gap-graded RA(particle size:10–20 mm)mix.The permeation coefficient of the RPC increased with increasing porosity.The splitting tensile strength of the RPC was positively correlated with its compressive strength.The compressive strength of the RPC decreased with increasing porosity.The regression analysis showed that the impact and abrasion resistance of the RPC increased with increasing compressive strength.In addition,all of the RPC specimens met the strength and permeation requirements.This study can provide theoretical support for the application of RPC.
基金General Program of National Natural Science Foundation of China(Grant No.51479168)The Natural Science Foundation Project of Liaoning Provincial Department of Education,China(Grant No.JJL201915404).
文摘The aim of this study is to improve the bond performance of basalt fiber reinforced polymer(BFRP)bars and recycled aggregate concrete(RAC)after being exposed to high temperatures.The bond behavior(failure modes,bond strength,bond stress-slip curves)between BFRP bars and hybrid fiber recycled aggregate concrete(HFRAC)after being exposed to temperatures ranging from 20℃up to 500℃was studied by using pull-out tests.The effect of high temperatures on mechanical properties of concrete(compressive strength,splitting tensile strength)and tensile strength of BFRP bars was also investigated.The bond strength decreased as the temperature increased and the drop of bond strength between RAC and BFRP bar was larger than that between HFRAC and BFRP bar.As the temperature rises,the key factor affecting the bond strength was gradually transformed from concrete strength to BFRP bar strength.The relationship between bond stress and slip in the dimensionless bond stress-slip ascending section was established,which was in good agreement with the experimental results.
基金Supported by the Fund of Hunan Provincial Construction Department(No.06-468-8)
文摘The mechanical performance of recycled aggregate concrete （RAC） is investigated. An experiment on the complete stress-strain curve under uniaxial compression loading of RAC is carried out. The experimental results indicate that the peak stress, peak strain, secant modulus of the peak point and original point increase with the strength grade of RAC enhanced. On the contrary, the residual stress of RAC decreases with the strength grade enhancing, and the failure of RAC is often broken at the interface between the recycled aggregate and the mortar matrix. Finally, the constitutive model of stress-strain model of RAC has been constituted, and the results from the constitutive model of stress-strain meet the experiment results very well.
基金the Key Projects of the China National Science & Technology Pillar Programunder Grant No.2008BAK48B03,the National Natural Science Foundation of China under Grant No.51178340
文摘Based on six-degree-of-freedom three-dimensional shaking table tests, the seismic response of a recycled aggregate concrete （RAC） frame was obtained. The analysis results indicate that the maximum story shear force and overturning moment reduce proportionally along the height of the model under the same earthquake wave. The story shear force, base shear coefficient and overturning moment of the structure increase progressively as the acceleration amplitude increases. The base shear coefficient is primarily controlled by the peak ground acceleration （PGA）. The relationships between the PGA and the shear coefficient as well as between the PGA and the dynamic amplification factor are obtained by mathematical fitting. The dynamic amplification factor decreases rapidly at the elastic-plastic stage, but decreases slowly with the development of the elastic-plasticity stage. The results show that the RAC frame structure has reasonable deformability when compared with natural aggregate concrete frame structures. The maximum inter-story drift ratios of the RAC frame model under frequent and rare intensity 8 test phases are 1/266 and 1/29, respectively, which are larger than the allowable value of 1/500 and 1/50 according to Chinese seismic design requirements. Nevertheless, the RAC frame structure does not collapse under base excitations with PGAs from 0.066 g up to 1.170 g.
文摘During the modernization or rehabilitation activity,the demolished structural waste causes large soil pollution and unavailability of natural aggregate is the big concern for the construction industry.Therefore,this manuscript deals with the Composite Steel Circular Column(CSCC)with Recycled Aggregate concrete(RAC)as infill is partly used,with the replacement of 25%and 50%in M30 grade of Concrete.And internal reinforcement steel is fully replaced by rolled steel tubes(circular and square)with varied thickness,ISA-unequal angle.Around 14 specimens are cast and examined under axial load for analysis of the deflection characteristics,the load-bearing capacity along with its buckling behavior.The experimental values are estimated through LVDT(linear variable differential transducer)at 3-phase.The curve of load-deflection is drawn with the load pattern.From the date interpretation,it is found column made of 50%-RAC has more than 25%-RAC.
基金This work was supported by the National Natural Science Foundation of China(No.52009045)National Key Research and Development Program of China(No.2018YFC0406902).
文摘Pervious concrete is recommended,which is of great benefit to the ecological environment and human living environment.In this paper,the influences of five water-cement ratios and four fly ash contents to replace the cement by mass with a water-cement ratio of 0.30 on the properties of Recycled Aggregate Pervious Concrete(RAPC)were studied.Following this,based on the Grey relational-Technique for Order Preference by Similarity to an Ideal Solution(TOPSIS)optimization method,the strength,permeability,abrasion loss rate,and material costs of RAPC were adopted as evaluation indices to establish a mix proportion optimization model.The results show that the increase of water-cement ratio and fly ash replacement level of RAPC leads to decreased compres-sive strength while an increase in the permeability and abrasion loss rate.According to test results based on the optimal model 0.30 was identified as the best mix proportion.In addition,ecological-economic analysis of RAPC raw materials was carried out by comparing different natural aggregates.The results of EE(embodied energy)and ECO 2e(embodied CO_(2) emission)pointed out that the combination of recycled aggregate and fly ash leads to sig-nificant ecological and economic benefits.
基金Funded by the National Natural Science Foundation of China(Nos.51278073,51678081,51678143)State Key Laboratory for Geo-mechanics and Deep Underground Engineering,China University of Mining&Technology(No.SKLGDUEK1704)
文摘The effect of carbonation treatment and mixing method on the mechanical properties and interfacial transition zone（ITZ） properties of recycled aggregate concrete（RAC） was investigated. Properties of recycled concrete aggregate（RCA） were tested firstly. Then, five types of concretes were made and slump of fresh concrete was measured immediately after mixing. Compressive strength and splitting tensile strength of hardened concrete were measured at 28 d. Meanwhile, the microstructure of RAC was analyzed by backscattered electron（BSE） image. It was found that the water absorption ratio of carbonated recycled concrete aggregate（CRCA） was much lower when compared to the untreated RCA. Comparatively, the apparent density of CRCA was not significantly modified. The concrete strength results indicate that the mix CRAC-2 prepared with CRCA by adopting two-stage mixing approach shows the highest compressive strength value compared to the other mixes. The microstructural analysis demonstrate that the mix CRAC-2 has a much denser old ITZ than the untreated RAC because of the chemical reaction between CO2 and the hydration products of RCA. This study confirms that the ITZ microstructure of RAC can be efficiently modified by carbonation treatment of RCA and encourages broadening the application of construction and demolition wastes.
基金supported by the Natural Science Foundation Project of Liaoning Provincial Department of Education of China under Grant No.JJL201915404,Zhejiang Provincial Natural Science Foundation of China under Grant No.LQ22E080024 and Zhejiang Province Department of Education Fund of China under Grant No.Y202146776.
文摘The development of recycled aggregate concrete(RAC)provides a new approach to limiting the waste of natural resources.In the present study,the mechanical properties and deformability of RACs were improved by adding basalt fibers(BFs)and using external restraints,such as a fiber-reinforced polymer(FRP)jacket or a PVC pipe.Samples were tested under axial compression.The results showed that RAC(50%replacement of aggregate)containing 0.2%BFs had the best mechanical properties.Using either BFs or PVC reinforcement had a slight effect on the loadbearing capacity and mode of failure.With different levels of BFs,the compressive strengths of the specimens reinforced with 1-layer and 3-layer basalt fiber reinforced polymer(BFRP)increased by 6.7%–10.5%and 16.5%–23.7%,respectively,and the ultimate strains increased by 48.5%–80.7%and 97.1%–141.1%,respectively.The peak stress of the 3-layer BFRP-PVC increased by 42.2%,and the ultimate strain improved by 131.3%,relative to the control.This reinforcement combined the high tensile strength of BFRP,which improved the post-peak behavior,and PVC,which enhanced the structural durability.In addition,to investigate the influence of the various constraints on compressive behavior,the stress-strain response was analyzed.Based on the analysis of experimental results,a peak stress-strain model and an amended ultimate stress-strain model were proposed.The models were verified as well;the result showed that the predictions from calculations are generally consistent with the experimental data(error within 10%).The results of this study provide a theoretical basis and reference for future applications of fiber-reinforced recycled concrete.
