The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition a...The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition at the corner point. The former can be solved directly by the equilibrium differential equation and the boundary conditions of four edges of the plate. The latter can be solved by using the superposition principle. Making use of the recommended method, the bending of the plate with all kinds of...展开更多
In this work, the finite element analysis of the elasto-plastic plate bending problems is carried out using transition rectangular plate elements. The shape functions of the transition plate elements are derived based...In this work, the finite element analysis of the elasto-plastic plate bending problems is carried out using transition rectangular plate elements. The shape functions of the transition plate elements are derived based on a practical rule. The transition plate elements are all quadrilateral and can be used to obtain efficient finite element models using minimum number of elements. The mesh convergence rates of the models including the transition elements are compared with the regular element models. To verify the developed elements, simple tests are demonstrated and various elasto-plastic problems are solved. Their results are compared with ANSYS results.展开更多
This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the...This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.展开更多
Ritz method is an effective way widely used to analyze the transverse bending of thin rectangular plates. Its accuracy depends completely on the basis functions selected. This paper selects the superposition of sine s...Ritz method is an effective way widely used to analyze the transverse bending of thin rectangular plates. Its accuracy depends completely on the basis functions selected. This paper selects the superposition of sine series with polynomials as the basis functions of thin rectangular plates. The calculating formulae are not only simple and easily programmed, but also have high accuracy. Finally, two numerical results are given and compared with those obtained by the classical method.展开更多
Based on the von Karman-type theory of plates, nonlinear bending problems of simply supported symmetric laminated cross-ply rectangular plates under the combined action of pressure and inplane load are investigated in...Based on the von Karman-type theory of plates, nonlinear bending problems of simply supported symmetric laminated cross-ply rectangular plates under the combined action of pressure and inplane load are investigated in this paper. The solution which satisfies the governing equations and boundary conditions is obtained by using the double Fourier series method.展开更多
In this paper, an exact solution for an uniformly loaded rectangular plate with two adjacent edges clamped, one edge simply supported and the other edge free, was given by using the concept of generalized simply suppo...In this paper, an exact solution for an uniformly loaded rectangular plate with two adjacent edges clamped, one edge simply supported and the other edge free, was given by using the concept of generalized simply supported edges and superposition method. The numerical results were given for the deflections along the free edge and bending moments along the clamped edges of a square plate.展开更多
In this paper the solution for the bending of corner-supported rectangular plate under concentrated load at any point (α/2, η) of the middle line of the plate is given by means of a conception called modified simply...In this paper the solution for the bending of corner-supported rectangular plate under concentrated load at any point (α/2, η) of the middle line of the plate is given by means of a conception called modified simply supported edges and the method of superposition. Some numerical example is presented. The solution obtained by this method checks very nicely with what was obtained by G.T. Shih[3] by means of spline finite element method when η=d/2. This shows that this method of solution is satisfactory.展开更多
The exact solution of the bending of a thick rectangular plate with three clamped edges and one free edge under a uniform transverse load is obtained by means of the concept of generalized simply-supported boundary[1]...The exact solution of the bending of a thick rectangular plate with three clamped edges and one free edge under a uniform transverse load is obtained by means of the concept of generalized simply-supported boundary[1] in Reissner's theory of thick plates. The effect of the thickness h of a plate on the bending is studied and the applicable range of Kirchhoffs theory for bending of thin plates is considered.展开更多
The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for t...The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.展开更多
A generalized point conforming rectangular element for plate bending is proposed. The present element displacement field can not only satisfy the continuity of normal displacement and its derivative at the element nod...A generalized point conforming rectangular element for plate bending is proposed. The present element displacement field can not only satisfy the continuity of normal displacement and its derivative at the element node, but also satisfy the generalized continuity at the middle point of each element boundary, where the generalized conforming condition is to make the non-conforming residual to be minimum. Numerical results show that the proposed element is more accurate than the ordinary 4-node non-conforming rectangular plate element (ACM element).展开更多
In this paper, the phenomenon of magnetoelastic bending is theoretically simulated for soft ferromagnetic rectangular thin plates in applied magnetic fields. A numerical program of 3d FEM is established to capture the...In this paper, the phenomenon of magnetoelastic bending is theoretically simulated for soft ferromagnetic rectangular thin plates in applied magnetic fields. A numerical program of 3d FEM is established to capture the nonlinear coupling interaction between magnetic fields and bending deflection. After the nonlinear characteristic of the bending deflection and the magnetic (field) force is quantitatively displayed, we discuss the critical magnetic field and the effect of the incident angle of obliquely applied magnetic field on the critical field to the phenomenon of magnetoelastic instability.展开更多
In this paper,applying the method of the reciprocal theorem,we give the stationary solutions of the forced vibration of cantilever rectangular plates under uniformly distributed harmonic load and concentrated harmonic...In this paper,applying the method of the reciprocal theorem,we give the stationary solutions of the forced vibration of cantilever rectangular plates under uniformly distributed harmonic load and concentrated harmonic load acting at any point of the plates,the figures and tables of number value of bending moment and the deflection amplitudes as well.展开更多
This article will discuss the bending problems of the rectangular plates with free boundaries on elastic foundations. We talk over the two cases, that is, the plate acted on its center by a concentrated force and the ...This article will discuss the bending problems of the rectangular plates with free boundaries on elastic foundations. We talk over the two cases, that is, the plate acted on its center by a concentrated force and the plate subjected to by a concentrated force equally at four corner points respectively. We select a flexural function which satisfies not only all the geometric boundary conditions on free edges wholly but also the boundary conditions of the total internal forces. We apply the variational method meanwhile and then obtain better approximate solutions.展开更多
In this paper, using of the superposition principle. the bending solution ofrectangular plate with one edge built-in and one corner point supported subjected touniform load is derived. The results indicate the method ...In this paper, using of the superposition principle. the bending solution ofrectangular plate with one edge built-in and one corner point supported subjected touniform load is derived. The results indicate the method has the advantages of rabidconvergence and high precision.展开更多
In this paper,under the non-uniformtransverse load,the problems of nonlinear bending for orthotropic rectangular plate are studied by using'the method of twovariable'[1]and 'the method of mixing perturba...In this paper,under the non-uniformtransverse load,the problems of nonlinear bending for orthotropic rectangular plate are studied by using'the method of twovariable'[1]and 'the method of mixing perturbation'[2].The uniformly valid asymptotic solutions of Nth-order for ε1 and Mth-order for ε2 for ortholropic rectangular plale with four clamped edges are oblained.展开更多
The typical quadrangular and triangular elements for thin plate bending based on Kirchhoff assumptions are the non- conforming elements with low computational accuracy and limitative application range in fmite element...The typical quadrangular and triangular elements for thin plate bending based on Kirchhoff assumptions are the non- conforming elements with low computational accuracy and limitative application range in fmite element method（FEM）. Some compatible elements can be developed by the means of supplementing correction functions, increasing nodes in element or on the boundaries, expanding nodal degrees of freedom（DOF）, etc, but these elements are inconvenient to apply in practice for the high calculation complexity. In this paper, in order to overcome the defects of thin plate bending finite element, numerical manifold method（NMM） was introduced to solve thin plate bending deformation problem. Rectangular mesh was adopted as mathematical mesh to form f＇mite element cover system, and then 16-cover manifold element was proposed. Numerical manifold formulas were constructed on the basis of minimum potential energy principle, displacement boundary conditions are implemented by penalty function method, and all the element matrixes were derived in details. The 16-cover element has a simple calculation process for employing only the transverse displacement cover DOFs as the basic unknown variables, and has been proved to meet the requirements of completeness and full compatibility. As an application, the presented 16-cover element has been used to analyze bending deformation of square thin plate under different loads and boundary conditions, and the results show that numerical manifold method with compatible element, compared with finite element method, can improve computational accuracy and convergence greatly.展开更多
Using double set parameter method, a 12-parameter trapezoidal plate bending element is presented. The first set of degrees of freedom, which make the element convergent, are the values at the four vertices and the mid...Using double set parameter method, a 12-parameter trapezoidal plate bending element is presented. The first set of degrees of freedom, which make the element convergent, are the values at the four vertices and the middle points of the four sides together with the mean values of the outer normal derivatives along four sides. The second set of degree of freedom, which make the number of unknowns in the resulting discrete system small and computation convenient are values and the first derivatives at the four vertices of the element. The convergence of the element is proved.展开更多
A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting dis...A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting displacement subspace sequence whose basis functions are constructed of scaling and shifting on the element domain of basic full node shape function. The basic full node shape function is constructed by extending the split node shape function of a traditional Mindlin plate element to other three quadrants around the coordinate zero point. As a result, a new rational MRA concept together with the resolution level (RL) is constituted for the element. The traditional 4-node rectangular Mindlin plate element and method is a mono-resolution one and also a special case of the proposed element and method. The meshing for the monoresolution plate element model is based on the empiricism while the RL adjusting for the multiresolution is laid on the rigorous mathematical basis. The analysis clarity of a plate structure is actually determined by the RL, not by the mesh. Thus, the accuracy of a plate structural analysis is replaced by the clarity, the irrational MRA by the rational and the mesh model by the RL that is the discretized model by the integrated.展开更多
Based on the crack tip field expansion of the Reissner plate, a special high order bending crack tip element is developed, and the element stiffness matrix is given in the explicit form, which is especially convenien...Based on the crack tip field expansion of the Reissner plate, a special high order bending crack tip element is developed, and the element stiffness matrix is given in the explicit form, which is especially convenient for engineering analyses. A numerical example is presented and compared with previous results to demonstrate the efficiency and accuracy of the special element.展开更多
Under the case of ignoring the body forces and considering components caused by diversion of membrane in vertical direction (z-direction),the constitutive equations of the problem of the nonlinear unsymmetrical bendin...Under the case of ignoring the body forces and considering components caused by diversion of membrane in vertical direction (z-direction),the constitutive equations of the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with variable thickness are given;then introducing the dimensionless variables and three small parameters,the dimensionaless governing equations of the deflection function and stress function are given.展开更多
文摘The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition at the corner point. The former can be solved directly by the equilibrium differential equation and the boundary conditions of four edges of the plate. The latter can be solved by using the superposition principle. Making use of the recommended method, the bending of the plate with all kinds of...
文摘In this work, the finite element analysis of the elasto-plastic plate bending problems is carried out using transition rectangular plate elements. The shape functions of the transition plate elements are derived based on a practical rule. The transition plate elements are all quadrilateral and can be used to obtain efficient finite element models using minimum number of elements. The mesh convergence rates of the models including the transition elements are compared with the regular element models. To verify the developed elements, simple tests are demonstrated and various elasto-plastic problems are solved. Their results are compared with ANSYS results.
文摘This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.
文摘Ritz method is an effective way widely used to analyze the transverse bending of thin rectangular plates. Its accuracy depends completely on the basis functions selected. This paper selects the superposition of sine series with polynomials as the basis functions of thin rectangular plates. The calculating formulae are not only simple and easily programmed, but also have high accuracy. Finally, two numerical results are given and compared with those obtained by the classical method.
文摘Based on the von Karman-type theory of plates, nonlinear bending problems of simply supported symmetric laminated cross-ply rectangular plates under the combined action of pressure and inplane load are investigated in this paper. The solution which satisfies the governing equations and boundary conditions is obtained by using the double Fourier series method.
文摘In this paper, an exact solution for an uniformly loaded rectangular plate with two adjacent edges clamped, one edge simply supported and the other edge free, was given by using the concept of generalized simply supported edges and superposition method. The numerical results were given for the deflections along the free edge and bending moments along the clamped edges of a square plate.
文摘In this paper the solution for the bending of corner-supported rectangular plate under concentrated load at any point (α/2, η) of the middle line of the plate is given by means of a conception called modified simply supported edges and the method of superposition. Some numerical example is presented. The solution obtained by this method checks very nicely with what was obtained by G.T. Shih[3] by means of spline finite element method when η=d/2. This shows that this method of solution is satisfactory.
文摘The exact solution of the bending of a thick rectangular plate with three clamped edges and one free edge under a uniform transverse load is obtained by means of the concept of generalized simply-supported boundary[1] in Reissner's theory of thick plates. The effect of the thickness h of a plate on the bending is studied and the applicable range of Kirchhoffs theory for bending of thin plates is considered.
基金Project supported by the National Natural Science Foundation of China (Grant No.10872163)the Natural Science Foundation of Education Department of Shaanxi Province (Grant No.08JK394)
文摘The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.
文摘A generalized point conforming rectangular element for plate bending is proposed. The present element displacement field can not only satisfy the continuity of normal displacement and its derivative at the element node, but also satisfy the generalized continuity at the middle point of each element boundary, where the generalized conforming condition is to make the non-conforming residual to be minimum. Numerical results show that the proposed element is more accurate than the ordinary 4-node non-conforming rectangular plate element (ACM element).
文摘In this paper, the phenomenon of magnetoelastic bending is theoretically simulated for soft ferromagnetic rectangular thin plates in applied magnetic fields. A numerical program of 3d FEM is established to capture the nonlinear coupling interaction between magnetic fields and bending deflection. After the nonlinear characteristic of the bending deflection and the magnetic (field) force is quantitatively displayed, we discuss the critical magnetic field and the effect of the incident angle of obliquely applied magnetic field on the critical field to the phenomenon of magnetoelastic instability.
文摘In this paper,applying the method of the reciprocal theorem,we give the stationary solutions of the forced vibration of cantilever rectangular plates under uniformly distributed harmonic load and concentrated harmonic load acting at any point of the plates,the figures and tables of number value of bending moment and the deflection amplitudes as well.
文摘This article will discuss the bending problems of the rectangular plates with free boundaries on elastic foundations. We talk over the two cases, that is, the plate acted on its center by a concentrated force and the plate subjected to by a concentrated force equally at four corner points respectively. We select a flexural function which satisfies not only all the geometric boundary conditions on free edges wholly but also the boundary conditions of the total internal forces. We apply the variational method meanwhile and then obtain better approximate solutions.
文摘In this paper, using of the superposition principle. the bending solution ofrectangular plate with one edge built-in and one corner point supported subjected touniform load is derived. The results indicate the method has the advantages of rabidconvergence and high precision.
文摘In this paper,under the non-uniformtransverse load,the problems of nonlinear bending for orthotropic rectangular plate are studied by using'the method of twovariable'[1]and 'the method of mixing perturbation'[2].The uniformly valid asymptotic solutions of Nth-order for ε1 and Mth-order for ε2 for ortholropic rectangular plale with four clamped edges are oblained.
基金supported by National Natural Science Foundation of China (Grant No. 50775044, Grant No. 50975050)Guangdong Provincial and Ministry of Education Industry-University-Research Integration Project of China (Grant No. 2009B090300044)
文摘The typical quadrangular and triangular elements for thin plate bending based on Kirchhoff assumptions are the non- conforming elements with low computational accuracy and limitative application range in fmite element method（FEM）. Some compatible elements can be developed by the means of supplementing correction functions, increasing nodes in element or on the boundaries, expanding nodal degrees of freedom（DOF）, etc, but these elements are inconvenient to apply in practice for the high calculation complexity. In this paper, in order to overcome the defects of thin plate bending finite element, numerical manifold method（NMM） was introduced to solve thin plate bending deformation problem. Rectangular mesh was adopted as mathematical mesh to form f＇mite element cover system, and then 16-cover manifold element was proposed. Numerical manifold formulas were constructed on the basis of minimum potential energy principle, displacement boundary conditions are implemented by penalty function method, and all the element matrixes were derived in details. The 16-cover element has a simple calculation process for employing only the transverse displacement cover DOFs as the basic unknown variables, and has been proved to meet the requirements of completeness and full compatibility. As an application, the presented 16-cover element has been used to analyze bending deformation of square thin plate under different loads and boundary conditions, and the results show that numerical manifold method with compatible element, compared with finite element method, can improve computational accuracy and convergence greatly.
基金This work is supported by NSFC(10171092)and NSF of Henan province
文摘Using double set parameter method, a 12-parameter trapezoidal plate bending element is presented. The first set of degrees of freedom, which make the element convergent, are the values at the four vertices and the middle points of the four sides together with the mean values of the outer normal derivatives along four sides. The second set of degree of freedom, which make the number of unknowns in the resulting discrete system small and computation convenient are values and the first derivatives at the four vertices of the element. The convergence of the element is proved.
文摘A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting displacement subspace sequence whose basis functions are constructed of scaling and shifting on the element domain of basic full node shape function. The basic full node shape function is constructed by extending the split node shape function of a traditional Mindlin plate element to other three quadrants around the coordinate zero point. As a result, a new rational MRA concept together with the resolution level (RL) is constituted for the element. The traditional 4-node rectangular Mindlin plate element and method is a mono-resolution one and also a special case of the proposed element and method. The meshing for the monoresolution plate element model is based on the empiricism while the RL adjusting for the multiresolution is laid on the rigorous mathematical basis. The analysis clarity of a plate structure is actually determined by the RL, not by the mesh. Thus, the accuracy of a plate structural analysis is replaced by the clarity, the irrational MRA by the rational and the mesh model by the RL that is the discretized model by the integrated.
文摘Based on the crack tip field expansion of the Reissner plate, a special high order bending crack tip element is developed, and the element stiffness matrix is given in the explicit form, which is especially convenient for engineering analyses. A numerical example is presented and compared with previous results to demonstrate the efficiency and accuracy of the special element.
文摘Under the case of ignoring the body forces and considering components caused by diversion of membrane in vertical direction (z-direction),the constitutive equations of the problem of the nonlinear unsymmetrical bending for orthotropic rectangular thin plate with variable thickness are given;then introducing the dimensionless variables and three small parameters,the dimensionaless governing equations of the deflection function and stress function are given.
