A single layer single element rectangular microstrip antenna on ridge ground plane for improved bandwidth is theoretically investigated with a view to develop a concrete physical insight in to the phenomenon. The simp...A single layer single element rectangular microstrip antenna on ridge ground plane for improved bandwidth is theoretically investigated with a view to develop a concrete physical insight in to the phenomenon. The simple single element probe fed rectangular microstrip antenna fabricated on conventional PTFE (Poly Tetra Fluride Ethelene) substrate have many advantages except its narrow bandwidth. The present study proposes the technique to control the resonant modes of a microstrip antenna for yielding better bandwidth using transverse resonance method. The present antenna is designed to fabricate on ridge ground plane which has been compared with conventional structure and around 6% - 7% improvement in bandwidth is revealed. The detailed variation of radiation pattern across its frequency band has been studied and presented in this paper. The proposed idea has been verified through a commercial software package (High Frequency Structure Simulator) for a patch operating in X band and explained quantitatively. The electric surface current distribution over the patch surface for both the conventional and proposed antenna is presented to explain the broad banding effect physically.展开更多
The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. T...The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. The formulation is based on the assumption that the flexural rigidity of the plate varies in the plane following a power form, and Poisson＇s ratio is constant. A fourth-order partial differential equation with variable coefficients is derived by assuming a Levy-type form for the transverse displacement. The governing equation can be transformed into a Whittaker equation, and an analytical solution is obtained for a thin rectangular plate subjected to the distributed loads. The validity of the present solution is shown by comparing the present results with those of the classical solution. The influence of in-plane variable stiffness on the deflection and bending moment is studied by numerical examples. The analytical solution presented here is useful in the design of rectangular plates with in-plane variable stiffness.展开更多
In this paper, the elastic wave propagation in a two-dimensional piezoelectric phononic crystal is studied by considering the mechanic-electric coupling. The generalized eigenvalue equation is obtained by the relation...In this paper, the elastic wave propagation in a two-dimensional piezoelectric phononic crystal is studied by considering the mechanic-electric coupling. The generalized eigenvalue equation is obtained by the relation of the mechanic and electric fields as well as the Bloch-Floquet theorem. The band structures of both the in-plane and anti-plane modes are calculated for a rectangular lattice by the planewave expansion method. The effects of the lattice constant ratio and the piezoelectricity with different filling fractions are analyzed. The results show that the largest gap width is not always obtained for a square lattice. In some situations, a rectangular lattice may generate larger gaps. The band gap characteristics are influenced obviously by the piezoelectricity with the larger lattice constant ratios and the filling fractions.展开更多
Transmissions of oblique incident wave from a row of rectangular piles are analyzed theoretically. The incident angle of plane wave is taken as g = 90° , there then is the transmission coefficient ｜T｜ = 1 （Thi...Transmissions of oblique incident wave from a row of rectangular piles are analyzed theoretically. The incident angle of plane wave is taken as g = 90° , there then is the transmission coefficient ｜T｜ = 1 （This is a paradox）. In this paper, by means of the approximate relation between the transmitted and incident wave angle found from the shape of a slit, the paradoxical phenomenon is removed. On the basis of the continuality of the pressure and flux and the analysis of flow resistance at the row of rectangular piles, formulas of reflection and transmission coefficients are obtained. The transmission and reflection coefficients predicted by the present model quite agree with those of laboratory experiments in previous references展开更多
Measurement of out-of-plane deformation is significant to understanding of the deflection mechanisms of the plate and tube structures.In this study,a new surface contouring technique with color structured light is app...Measurement of out-of-plane deformation is significant to understanding of the deflection mechanisms of the plate and tube structures.In this study,a new surface contouring technique with color structured light is applied to measure the out-of-plane deformation of structures with one-shot projection.Through color fringe recognizing,decoding and triangulation processing for the captured images corresponding to each deformation state,the feasibility of the method is testified by the measurement of elastic deflections of a flexible square plate,showing good agreement with those from the calibrated displacement driver.The plastic deformation of two alloy aluminum rectangular tubes is measured to show the technique application to surface topographic evaluation of the buckling structures with large displacements.展开更多
The existing nearest neighbor query methods cannot directly perform the nearest neighbor query of specified geographical direction space.In order to compensate the shortcomings of the existing methods,a directional ne...The existing nearest neighbor query methods cannot directly perform the nearest neighbor query of specified geographical direction space.In order to compensate the shortcomings of the existing methods,a directional nearest neighbor query method in specific direction space based on Voronoi diagram is put forward.This work studies two cases,i.e.the query point is static and the query point moves with a constant velocity.Under the static condition,the corresponding pruning method and the pruning algorithm of the specified direction nearest neighbor(pruning_SDNN algorithm)are proposed by combining the plane right-angle coordinate system with the north-west direction,and then according to the smallest external rectangle of Voronoi polygon,the specific query is made and the direction nearest neighbor query based on Voronoi rectangle(VR-DNN) algorithm is given.In the case of moving with a constant velocity,first of all,the combination of plane right angle coordinate system,geographical direction and circle are used,the query range is determined and pruning methods and the pruning algorithm of the direction nearest neighbor based on decision circle(pruning_DDNN algorithm) are put forward.Then,according to the different position of motion trajectory and Voronoi diagram,a specific query through the nature of Voronoi diagram is given.At last,the direction nearest neighbor query based on Voronoi diagram and motion trajectory(VM-DNN) algorithm is put forward.The theoretical research and experiments show that the proposed algorithm can effectively deal with the problem of the nearest neighbor query for a specified geographical direction space.展开更多
文摘A single layer single element rectangular microstrip antenna on ridge ground plane for improved bandwidth is theoretically investigated with a view to develop a concrete physical insight in to the phenomenon. The simple single element probe fed rectangular microstrip antenna fabricated on conventional PTFE (Poly Tetra Fluride Ethelene) substrate have many advantages except its narrow bandwidth. The present study proposes the technique to control the resonant modes of a microstrip antenna for yielding better bandwidth using transverse resonance method. The present antenna is designed to fabricate on ridge ground plane which has been compared with conventional structure and around 6% - 7% improvement in bandwidth is revealed. The detailed variation of radiation pattern across its frequency band has been studied and presented in this paper. The proposed idea has been verified through a commercial software package (High Frequency Structure Simulator) for a patch operating in X band and explained quantitatively. The electric surface current distribution over the patch surface for both the conventional and proposed antenna is presented to explain the broad banding effect physically.
基金Project supported by the National Natural Science Foundation of China (No. 11072177)
文摘The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. The formulation is based on the assumption that the flexural rigidity of the plate varies in the plane following a power form, and Poisson＇s ratio is constant. A fourth-order partial differential equation with variable coefficients is derived by assuming a Levy-type form for the transverse displacement. The governing equation can be transformed into a Whittaker equation, and an analytical solution is obtained for a thin rectangular plate subjected to the distributed loads. The validity of the present solution is shown by comparing the present results with those of the classical solution. The influence of in-plane variable stiffness on the deflection and bending moment is studied by numerical examples. The analytical solution presented here is useful in the design of rectangular plates with in-plane variable stiffness.
基金the National Natural Science Foundation of China (10672017 and 10632020)
文摘In this paper, the elastic wave propagation in a two-dimensional piezoelectric phononic crystal is studied by considering the mechanic-electric coupling. The generalized eigenvalue equation is obtained by the relation of the mechanic and electric fields as well as the Bloch-Floquet theorem. The band structures of both the in-plane and anti-plane modes are calculated for a rectangular lattice by the planewave expansion method. The effects of the lattice constant ratio and the piezoelectricity with different filling fractions are analyzed. The results show that the largest gap width is not always obtained for a square lattice. In some situations, a rectangular lattice may generate larger gaps. The band gap characteristics are influenced obviously by the piezoelectricity with the larger lattice constant ratios and the filling fractions.
文摘Transmissions of oblique incident wave from a row of rectangular piles are analyzed theoretically. The incident angle of plane wave is taken as g = 90° , there then is the transmission coefficient ｜T｜ = 1 （This is a paradox）. In this paper, by means of the approximate relation between the transmitted and incident wave angle found from the shape of a slit, the paradoxical phenomenon is removed. On the basis of the continuality of the pressure and flux and the analysis of flow resistance at the row of rectangular piles, formulas of reflection and transmission coefficients are obtained. The transmission and reflection coefficients predicted by the present model quite agree with those of laboratory experiments in previous references
文摘Measurement of out-of-plane deformation is significant to understanding of the deflection mechanisms of the plate and tube structures.In this study,a new surface contouring technique with color structured light is applied to measure the out-of-plane deformation of structures with one-shot projection.Through color fringe recognizing,decoding and triangulation processing for the captured images corresponding to each deformation state,the feasibility of the method is testified by the measurement of elastic deflections of a flexible square plate,showing good agreement with those from the calibrated displacement driver.The plastic deformation of two alloy aluminum rectangular tubes is measured to show the technique application to surface topographic evaluation of the buckling structures with large displacements.
基金Supported by the National Natural Science Foundation of China(No.61872105,62072136)the Natural Science Foundation of Heilongjiang Province(No.LH2020F047)+1 种基金the Scientific Research Foundation for Returned Scholars Abroad of Heilongjiang Province of China(No.LC2018030)the National Key R&D Program of China(No.2020YFB1710200)。
文摘The existing nearest neighbor query methods cannot directly perform the nearest neighbor query of specified geographical direction space.In order to compensate the shortcomings of the existing methods,a directional nearest neighbor query method in specific direction space based on Voronoi diagram is put forward.This work studies two cases,i.e.the query point is static and the query point moves with a constant velocity.Under the static condition,the corresponding pruning method and the pruning algorithm of the specified direction nearest neighbor(pruning_SDNN algorithm)are proposed by combining the plane right-angle coordinate system with the north-west direction,and then according to the smallest external rectangle of Voronoi polygon,the specific query is made and the direction nearest neighbor query based on Voronoi rectangle(VR-DNN) algorithm is given.In the case of moving with a constant velocity,first of all,the combination of plane right angle coordinate system,geographical direction and circle are used,the query range is determined and pruning methods and the pruning algorithm of the direction nearest neighbor based on decision circle(pruning_DDNN algorithm) are put forward.Then,according to the different position of motion trajectory and Voronoi diagram,a specific query through the nature of Voronoi diagram is given.At last,the direction nearest neighbor query based on Voronoi diagram and motion trajectory(VM-DNN) algorithm is put forward.The theoretical research and experiments show that the proposed algorithm can effectively deal with the problem of the nearest neighbor query for a specified geographical direction space.
