Model B-I for marco rectangular element is presented for the first time in this paper. To establish the influence surf ace for resultant R of bending plates, a number of generalized distributive loads q are defined. I...Model B-I for marco rectangular element is presented for the first time in this paper. To establish the influence surf ace for resultant R of bending plates, a number of generalized distributive loads q are defined. It is shown by numerical examples that Model B-I and the formula for the generalized distributive loads advanced in this paper are featured by high accuracy, low memory space and flexibility in practical application, and that they are especially effective for plate structures subject to moving loads, such as the two-dimensional continuous plates of highway bridges and the flat stabs in piled jetty engineering.展开更多
Based on generalized variational principles, an element called MR-12 was constructed for the static and dynamic analysis of thin plates with orthogonal anisotropy. Numerical results showed that this incompatible eleme...Based on generalized variational principles, an element called MR-12 was constructed for the static and dynamic analysis of thin plates with orthogonal anisotropy. Numerical results showed that this incompatible element converges very rapidly and has good accuracy. It was demonstrated that generalized varialional principles arc useful and effective in founding incompatible clement.Moreover, element MR-12 is easy for implementation since it does not differ very much from the common rectangular element R-12 of thin plate.展开更多
We consider a singular perturbation problem which describes 2D Darcy-Stokes flow. An H（div）- conforming rectangular element, DS-R14, is proposed and analyzed first. This element has 14 degrees of freedom for velocit...We consider a singular perturbation problem which describes 2D Darcy-Stokes flow. An H（div）- conforming rectangular element, DS-R14, is proposed and analyzed first. This element has 14 degrees of freedom for velocity and is proved to be uniformly convergent with respect to perturbation constant. We then simplify this element to get another H（div）-conforming rectangular element, DS-R12, which has 12 degrees of freedom for velocity. The uniform convergence is also obtained for this element. Finally, we construct a de Rham complex corresponding to DS-R12 element.展开更多
A generalized point conforming rectangular element for plate bending is proposed. The present element displacement field can not only satisfy the continuity of normal displacement and its derivative at the element nod...A generalized point conforming rectangular element for plate bending is proposed. The present element displacement field can not only satisfy the continuity of normal displacement and its derivative at the element node, but also satisfy the generalized continuity at the middle point of each element boundary, where the generalized conforming condition is to make the non-conforming residual to be minimum. Numerical results show that the proposed element is more accurate than the ordinary 4-node non-conforming rectangular plate element (ACM element).展开更多
A multi-resolution rectangular shell element with membrane-bending based on the Kirchhoff-Love theory is proposed. The multi-resolution analysis （MRA） framework is formulated out of a mutually nesting displacement s...A multi-resolution rectangular shell element with membrane-bending based on the Kirchhoff-Love theory is proposed. The multi-resolution analysis （MRA） framework is formulated out of a mutually nesting displacement subspace sequence, whose basis functions are constructed of scaling and shifting on the element domain of basic node shape functions. The basic node shape functions are constructed from shifting to other three quadrants around a specific node of a basic element in one quadrant and joining the corresponding node shape functions of four elements at the specific node. The MRA endows the proposed element with the resolution level （RL） to adjust the element node number, thus modulating structural analysis accuracy accordingly. The node shape functions of Kronecker delta property make the treatment of element boundary condition quite convenient and enable the stiffness matrix and the loading column vectors of the proposed element to be automatically acquired through quadraturing around nodes in RL adjusting. As a result, the traditional 4-node rectangular shell element is a mono-resolution one and also a special case of the proposed element. The accuracy of a structural analysis is actually determined by the RL, not by the mesh. The simplicity and clarity of node shape function formulation with the Kronecker delta property, and the rational MRA enable the proposed element method to be implemented more rationally, easily and efficiently than the conventional mono-resolution rectangular shell element method or other corresponding MRA methods.展开更多
A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting dis...A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting displacement subspace sequence whose basis functions are constructed of scaling and shifting on the element domain of basic full node shape function. The basic full node shape function is constructed by extending the split node shape function of a traditional Mindlin plate element to other three quadrants around the coordinate zero point. As a result, a new rational MRA concept together with the resolution level (RL) is constituted for the element. The traditional 4-node rectangular Mindlin plate element and method is a mono-resolution one and also a special case of the proposed element and method. The meshing for the monoresolution plate element model is based on the empiricism while the RL adjusting for the multiresolution is laid on the rigorous mathematical basis. The analysis clarity of a plate structure is actually determined by the RL, not by the mesh. Thus, the accuracy of a plate structural analysis is replaced by the clarity, the irrational MRA by the rational and the mesh model by the RL that is the discretized model by the integrated.展开更多
The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for t...The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.展开更多
The interaction between an elastic rectangular inclusion and a kinked crack in an infinite elastic body was considered by using boundary element method.The new complex boundary integral equations were derived.By intro...The interaction between an elastic rectangular inclusion and a kinked crack in an infinite elastic body was considered by using boundary element method.The new complex boundary integral equations were derived.By introducing a complex unknown function H(t) related to the interface displacement density and traction and applying integration by parts,the traction continuous condition was satisfied automatically.Only one complex boundary integral equation was obtained on interface and involves only singularity of order l/r.To verify the validity and effectiveness of the present boundary element method,some typical examples were calculated.The obtained results show that the crack stress intensity factors decrease as the shear modulus of inclusion increases.Thus,the crack propagation is easier near a softer inclusion and the harder inclusion is helpful for crack arrest.展开更多
This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the...This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.展开更多
In this paper, the hydrodynamic characteristics and flow field around rectangular and delta hydrofoils, moving with a constant speed beneath the free surface are numerically studied by means of isoparametric boundary ...In this paper, the hydrodynamic characteristics and flow field around rectangular and delta hydrofoils, moving with a constant speed beneath the free surface are numerically studied by means of isoparametric boundary element method （IBEM）. The quantities （source and dipole strengths） and the geometry of the dements are represented by a linear distribution. Two types of three-dimensional hydrofoils （rectangular and delta） are selected with NACA4412 and symmetric Joukowski sections. Some numerical results of pressure distribution, lift, wave-making drag coefficients and velocity field around the hydrofoils are presented. Also, the wave pattern due to moving hydrofoil is predicted at different operational conditions. Comparisons are made between computational results obtained through this method and those from the experimental measurements and other numerical results which reveal good agreement.展开更多
To investigate the formation of internal cracks in GCrl 5 bearing steels during the soft reduction process in rectangular bloom con- tinuous casting, fully coupled thermomechanieal finite element models were developed...To investigate the formation of internal cracks in GCrl 5 bearing steels during the soft reduction process in rectangular bloom con- tinuous casting, fully coupled thermomechanieal finite element models were developed using the commercial software MSC.MARC, and microstructures and fractographs were also observed. With the finite element models, the contours of temperature, equivalent plastic strain, and equivalent vun Mises stress were simulated. It is observed that the fracture surfaces of internal cracks are covered by cleavage or quasi-cleavage facets. The region of internal cracks in the intergranular brittle fracture mode is in the mushy zone between the zero ductility temperature （ZDT） and the zero strength temperature （ZST）. The simulated equivalent plastic strain in the crack region is 2.34%-2.45%, which is larger than the critical strain （0.4%-1.5%）, and the equivalent von Mises stress is 1.84-5.05 MPa, which is within the range of criti- cal stress （3.9-7.2 MPa）, thus resulting in the occurrence of internal cracks. Reducing the soft reduction amount from 3 to 2 mm can lower the stress under the critical value.展开更多
The novel approach of this paper describes the suppression of grating lobe level with the element count optimization in planar antenna array. Rectangular lattice (RL) and triangular lattice (TL) structures are chosen ...The novel approach of this paper describes the suppression of grating lobe level with the element count optimization in planar antenna array. Rectangular lattice (RL) and triangular lattice (TL) structures are chosen for determining the achievable array element patterns (EP) and further suppressing the grating lobe level. The element spacing and number of elements (10 × 20 array) are taken into account for particular lattice. Grating lobe peaks are observed for the 200-element planar array at maximum scan angle (θ) with the set frequency of 3 GHz. Further, it is found that 14°;bore sight elevation of rectangular lattice produces a transformed field of view, which permits a reduction in element count of 20.39% compared with 10° bore sight elevation. Finally, the typical values of elevation, element count and array size (25 cm2) are trained using artificial neural network (ANN) algorithm and element count is predicted after testing the network. The network shows a high success rate.展开更多
文摘Model B-I for marco rectangular element is presented for the first time in this paper. To establish the influence surf ace for resultant R of bending plates, a number of generalized distributive loads q are defined. It is shown by numerical examples that Model B-I and the formula for the generalized distributive loads advanced in this paper are featured by high accuracy, low memory space and flexibility in practical application, and that they are especially effective for plate structures subject to moving loads, such as the two-dimensional continuous plates of highway bridges and the flat stabs in piled jetty engineering.
文摘Based on generalized variational principles, an element called MR-12 was constructed for the static and dynamic analysis of thin plates with orthogonal anisotropy. Numerical results showed that this incompatible element converges very rapidly and has good accuracy. It was demonstrated that generalized varialional principles arc useful and effective in founding incompatible clement.Moreover, element MR-12 is easy for implementation since it does not differ very much from the common rectangular element R-12 of thin plate.
基金supported by National Natural Science Foundation of China(Grant No.11071226)the Hong Kong Research Grants Council(Grant No.201112)
文摘We consider a singular perturbation problem which describes 2D Darcy-Stokes flow. An H（div）- conforming rectangular element, DS-R14, is proposed and analyzed first. This element has 14 degrees of freedom for velocity and is proved to be uniformly convergent with respect to perturbation constant. We then simplify this element to get another H（div）-conforming rectangular element, DS-R12, which has 12 degrees of freedom for velocity. The uniform convergence is also obtained for this element. Finally, we construct a de Rham complex corresponding to DS-R12 element.
文摘A generalized point conforming rectangular element for plate bending is proposed. The present element displacement field can not only satisfy the continuity of normal displacement and its derivative at the element node, but also satisfy the generalized continuity at the middle point of each element boundary, where the generalized conforming condition is to make the non-conforming residual to be minimum. Numerical results show that the proposed element is more accurate than the ordinary 4-node non-conforming rectangular plate element (ACM element).
基金financial support by the Open Foundation of Chongqing Key Laboratory of Geomechanics and Geoenvironment Protection(Logistical Engineering University)(No.GKLGGP 2013-02)
文摘A multi-resolution rectangular shell element with membrane-bending based on the Kirchhoff-Love theory is proposed. The multi-resolution analysis （MRA） framework is formulated out of a mutually nesting displacement subspace sequence, whose basis functions are constructed of scaling and shifting on the element domain of basic node shape functions. The basic node shape functions are constructed from shifting to other three quadrants around a specific node of a basic element in one quadrant and joining the corresponding node shape functions of four elements at the specific node. The MRA endows the proposed element with the resolution level （RL） to adjust the element node number, thus modulating structural analysis accuracy accordingly. The node shape functions of Kronecker delta property make the treatment of element boundary condition quite convenient and enable the stiffness matrix and the loading column vectors of the proposed element to be automatically acquired through quadraturing around nodes in RL adjusting. As a result, the traditional 4-node rectangular shell element is a mono-resolution one and also a special case of the proposed element. The accuracy of a structural analysis is actually determined by the RL, not by the mesh. The simplicity and clarity of node shape function formulation with the Kronecker delta property, and the rational MRA enable the proposed element method to be implemented more rationally, easily and efficiently than the conventional mono-resolution rectangular shell element method or other corresponding MRA methods.
文摘A locking-free rectangular Mindlin plate element with a new multi-resolution analysis (MRA) is proposed and a new finite element method is hence presented. The MRA framework is formulated out of a mutually nesting displacement subspace sequence whose basis functions are constructed of scaling and shifting on the element domain of basic full node shape function. The basic full node shape function is constructed by extending the split node shape function of a traditional Mindlin plate element to other three quadrants around the coordinate zero point. As a result, a new rational MRA concept together with the resolution level (RL) is constituted for the element. The traditional 4-node rectangular Mindlin plate element and method is a mono-resolution one and also a special case of the proposed element and method. The meshing for the monoresolution plate element model is based on the empiricism while the RL adjusting for the multiresolution is laid on the rigorous mathematical basis. The analysis clarity of a plate structure is actually determined by the RL, not by the mesh. Thus, the accuracy of a plate structural analysis is replaced by the clarity, the irrational MRA by the rational and the mesh model by the RL that is the discretized model by the integrated.
基金Project supported by the National Natural Science Foundation of China (Grant No.10872163)the Natural Science Foundation of Education Department of Shaanxi Province (Grant No.08JK394)
文摘The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.
文摘The interaction between an elastic rectangular inclusion and a kinked crack in an infinite elastic body was considered by using boundary element method.The new complex boundary integral equations were derived.By introducing a complex unknown function H(t) related to the interface displacement density and traction and applying integration by parts,the traction continuous condition was satisfied automatically.Only one complex boundary integral equation was obtained on interface and involves only singularity of order l/r.To verify the validity and effectiveness of the present boundary element method,some typical examples were calculated.The obtained results show that the crack stress intensity factors decrease as the shear modulus of inclusion increases.Thus,the crack propagation is easier near a softer inclusion and the harder inclusion is helpful for crack arrest.
文摘This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.
文摘In this paper, the hydrodynamic characteristics and flow field around rectangular and delta hydrofoils, moving with a constant speed beneath the free surface are numerically studied by means of isoparametric boundary element method （IBEM）. The quantities （source and dipole strengths） and the geometry of the dements are represented by a linear distribution. Two types of three-dimensional hydrofoils （rectangular and delta） are selected with NACA4412 and symmetric Joukowski sections. Some numerical results of pressure distribution, lift, wave-making drag coefficients and velocity field around the hydrofoils are presented. Also, the wave pattern due to moving hydrofoil is predicted at different operational conditions. Comparisons are made between computational results obtained through this method and those from the experimental measurements and other numerical results which reveal good agreement.
基金financially supported by the Key Science and Technology Program of Liaoning Province, China (No.2007414003)
文摘To investigate the formation of internal cracks in GCrl 5 bearing steels during the soft reduction process in rectangular bloom con- tinuous casting, fully coupled thermomechanieal finite element models were developed using the commercial software MSC.MARC, and microstructures and fractographs were also observed. With the finite element models, the contours of temperature, equivalent plastic strain, and equivalent vun Mises stress were simulated. It is observed that the fracture surfaces of internal cracks are covered by cleavage or quasi-cleavage facets. The region of internal cracks in the intergranular brittle fracture mode is in the mushy zone between the zero ductility temperature （ZDT） and the zero strength temperature （ZST）. The simulated equivalent plastic strain in the crack region is 2.34%-2.45%, which is larger than the critical strain （0.4%-1.5%）, and the equivalent von Mises stress is 1.84-5.05 MPa, which is within the range of criti- cal stress （3.9-7.2 MPa）, thus resulting in the occurrence of internal cracks. Reducing the soft reduction amount from 3 to 2 mm can lower the stress under the critical value.
文摘The novel approach of this paper describes the suppression of grating lobe level with the element count optimization in planar antenna array. Rectangular lattice (RL) and triangular lattice (TL) structures are chosen for determining the achievable array element patterns (EP) and further suppressing the grating lobe level. The element spacing and number of elements (10 × 20 array) are taken into account for particular lattice. Grating lobe peaks are observed for the 200-element planar array at maximum scan angle (θ) with the set frequency of 3 GHz. Further, it is found that 14°;bore sight elevation of rectangular lattice produces a transformed field of view, which permits a reduction in element count of 20.39% compared with 10° bore sight elevation. Finally, the typical values of elevation, element count and array size (25 cm2) are trained using artificial neural network (ANN) algorithm and element count is predicted after testing the network. The network shows a high success rate.
