This paper investigates the torsion analysis of coated bars with a rectangular cross-section. Two opposite faces of a bar are coated by two isotropie layers with different materials of the original substrate that are ...This paper investigates the torsion analysis of coated bars with a rectangular cross-section. Two opposite faces of a bar are coated by two isotropie layers with different materials of the original substrate that are perfectly bonded to the bar. With the Saint- Venant torsion theory, the governing equation of the problem in terms of the warping function is established and solved using the finite Fourier cosine transform. The state of stress on the cross-section, warping of the cross-section, and torsional rigidity of the bar are evaluated. Effects of thickness of the coating layers and material properties on these quantities are investigated. A set of graphs are provided that can be used to determine the coating thicknesses and material properties so as to keep the maximum von Mises stress on the cross-section below an allowable value for effective use of the coating layer.展开更多
Effect of temperature-dependent viscosity on fully developed forced convection in a duct of rectangular cross-section occupied by a fluid-saturated porous medium is investigated analytically. The Darcy flow model is a...Effect of temperature-dependent viscosity on fully developed forced convection in a duct of rectangular cross-section occupied by a fluid-saturated porous medium is investigated analytically. The Darcy flow model is applied and the viscosity-temperature relation is assumed to be an inverse-linear one. The case of uniform heat flux on the walls, i.e. the H boundary condition in the terminology of Kays and Crawford [12], is treated. For the case of a fluid whose viscosity decreases with temperature, it is found that the effect of the variation is to increase the Nusselt number for heated walls. Having found the velocity and the temperature distribution, the second law of thermodynamics is invoked to find the local and average entropy generation rate. Expressions for the entropy generation rate, the Bejan number, the heat transfer irreversibility, and the fluid flow irreversibility are presented in terms of the Brinkman number, the Péclet number, the viscosity variation number, the dimensionless wall heat flux, and the aspect ratio （width to height ratio）. These expressions let a parametric study of the problem based on which it is observed that the entropy generated due to flow in a duct of square cross-section is more than those of rectangular counterparts while increasing the aspect ratio decreases the entropy generation rate similar to what previously reported for the clear flow case by Ratts and Rant [14].展开更多
Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Fa...Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.展开更多
The cross-sectional distortion usually appears during rotary-draw bending process of thin-walled rectangular tube with small bending radius.To study the cross-sectional distortion of the tube,a three-dimensional finit...The cross-sectional distortion usually appears during rotary-draw bending process of thin-walled rectangular tube with small bending radius.To study the cross-sectional distortion of the tube,a three-dimensional finite-element model of the process was developed based on ABAQUS/Explicit code and its reliability was validated by experiment.Then,the cross-sectional distortion behaviors of the tube were investigated.The results show that a zone of larger circumferential stress appears on the tube when bending angle reaches 30°.And in the larger circumferential stress zone,the sagging phenomenon is produced obviously.The maximum cross-sectional distortion is located in the larger circumferential stress zone and the angle between the plane of maximum cross-sectional distortion and the bending reference plane is about 50°.The position of the maximum cross-sectional distortion keeps almost unchanged with the variation of the clearances between dies and tube.展开更多
The bent double-ridged rectangular tube(DRRT)with high forming quality is helpful to improve the microwave transmission accuracy.For reducing the cross-sectional deformation in the H-typed bending process,in addition ...The bent double-ridged rectangular tube(DRRT)with high forming quality is helpful to improve the microwave transmission accuracy.For reducing the cross-sectional deformation in the H-typed bending process,in addition to using rigid mandrel to support the inside of tube,ridge groove fillers are also added to restrict the deformation of ridge grooves.Because of the change of stress and strain state of bent tube in bending,rigid mandrel retracting and specially twicespringback stages,and the springback of fillers,the cross-sectional deformation of tube in each stage may be different.Therefore,based on the ABAQUS platform,the finite element models(FEM)for H-typed bending,mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated.It is found that,for the height and width deformation of tube and spacing deformation of ridge grooves,retraction of mandrel can make the distribution of these deformations more uniform along the bending direction.The first springback can reduce these deformations significantly,which should be emphasized.But the second springback only increases them by less amount,which can be ignored.The smaller height deformation of ridge groove and filler can be neglected.展开更多
Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between ...Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.展开更多
Different yield criterion has great difference in predicting the deformation of tube with different material.In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangu...Different yield criterion has great difference in predicting the deformation of tube with different material.In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangular tube(DRRT)during rotary draw bending(RDB)process,Mises isotropic yield criterion,Hill’48 and Barlat/Lian anisotropic yield criteria commonly used in practical engineering are introduced to simulate RDB of DRRT.The inverse method combining uniaxial tensile test of whole tube and response surface methodology was proposed to identify the parameters of Hill’48 and Barlat/Lian yield criteria of small-sized H96 brass extrusion DRRT as well.Then based on ABAQUS/Explicit platform,the FE models of RDB process of DRRT considering Mises,Hill’48 and Barlat/Lian yield criteria were built.The results show that:The variation trend of cross-sectional deformation ratio is same when using different yield criteria.The cross-sectional deformation ratio by using Mises yield criterion is close to that by using Hill’48 yield criterion.However,there is a quite difference between by using Barlat/Lian yield criterion and by using Mises or Hill’48 yield criteria.The prediction values of cross-sectional height deformation by using three yield criteria all underestimate the experiment ones,and the prediction values of cross-sectional width deformation overestimate the experiment ones.By comparing the simulation results of cross-sectional deformation of the DRRT with different yield criteria and experiment ones,Barlat/Lian yield criterion is found to be suitable for describing the RDB process of DRRT.展开更多
The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly comple...The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.展开更多
Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess...Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.展开更多
OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which...OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.展开更多
To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with...To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.展开更多
Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a kno...Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a knowledge mapping was generated based on published studies to investigate the characteristics of bibliometric studies on acupuncture and the extent of duplicate publications,with the overarching goal of providing a comprehensive overview of the knowledge structure in this field.Methods:This cross-sectional study used three databases(PubMed,Web of Science,and Scopus)to identify relevant studies up to May 1,2024.In addition,the reference lists were retrieved as a supplement.To track research trends,we employed Microsoft Excel and R software to extract,code,and analyze information.Study selection,data extraction,and validation were performed independently by at least two reviewers.The reporting quality of included studies was assessed using the Preliminary guideline for reporting bibliometric reviews of the biomedical literature(BIBLIO).Results:Among the 6,221 bibliometric reviews examined,113 relevant publications were identified,80 focusing on various diseases/conditions.The annual number of publications has gradually increased,with the output in the past four years being 3.52 times higher than that before 2020.China(106)and Chengdu University of Traditional Chinese Medicine(16)have the highest number of publications.The most prolific author is Fan-Rong Liang,with six articles.The first bibliometric study,by Hai-Yan Li,was published in 2010.Journal of Pain Research,with 36 articles,holds the most publications.The top three diseases:diseases of the nervous system;symptoms,signs,or clinical findings not elsewhere classified;and mental,behavioral,or neurodevelopmental disorders.There may be potential duplication in research on 13 diseases/conditions,notably stroke,migraine,pain/analgesia,cancer pain,shoulder pain,facial paralysis/bell’s palsy,chronic pain,and cognitive impairment.In BIBLIO,the most frequently missing items are issues/topics(item 2),quality assessment(item 11),and descriptive findings(item 13).Conclusion:This study demonstrates that acupuncture bibliometrics is actively utilized to identify dominant diseases/conditions,aiding scholars in understand the knowledge structure and main topics.Although the number of related studies is increasing,with an average of 25 studies annually,overlap in some areas highlights the need for adherence to reporting guidelines and careful topic selection to ensure truly valuable insights and knowledge contributions.The adherence to BIBLIO’s 20 proposed items across analyzed articles,highlighting important in reporting practices.展开更多
Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods...Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods:A total of 217 young breast cancer patients were enrolled from a tertiary Grade A oncology hospital in Tianjin,China,using the convenience sampling method.All participants completed the general questionnaire,Ambivalence over Emotion Expression Questionnaire(AEQ),and Family Adapt-Ability and Cohesion Evaluation Scales-Chinese Version(FACES-CV).We employed exploratory latent profileanalysis for ambivalence over emotional expression profilingand logistic regression analysis to identify the influentialfactors Results:The results of the latent profileanalysis supported the models of four latent profiles,which were definedas“low conflict-lowexpression reflection”(19.2%),“high conflict-high inhibition expression”(43.9%),“moderate conflict-highregret expression”(18.1%),and“moderate conflict-desire understand”(18.8%).Logistic regression revealed that family cohesion,marital status,residence,per capita monthly income,and cancer stage were the influencingfactors of ambivalence over emotional expression in young breast cancer patients(P<0.05)Conclusions:Levels of ambivalence over emotional expression ameast cancer patients with breast cancer were highly heterogeneous.Medical staff should provide psychological counseling and health education tailored to the unique characteristics of emotional expression ambivalence in different patient groups to promote healthy emotional expression among patients.展开更多
The coconut structure exhibits inherent impact resistance,with the macroscopically ordered distribution of variable crosssection fibers in its husk playing a crucial role in stress wave propagation and scaling.Inspire...The coconut structure exhibits inherent impact resistance,with the macroscopically ordered distribution of variable crosssection fibers in its husk playing a crucial role in stress wave propagation and scaling.Inspired by the natural structure and fibers,this study proposes a stress wave propagation model for a variable cross-section bar considering viscous effects.A theoretical model for stress wave propagation in a fusiform-shaped bar with variable cross-section is established,elucidating the stress wave scaling effect observed in coconut fibers.Additionally,a quasi-one-dimensional method for analyzing and measuring stress wave propagation is introduced,and an experimental setup is assembled.Experimental validation of the stress wave scaling effect confirms the theory’s accuracy for stress wave scaling in variable cross-section bars.This research provides theoretical guidance and measurement methods for the design of space landers,automobile anti-collision beams,stress wave collectors,and scalers,as well as for impact testing of macro and micro materials and the design of sustainable plant-based materials for impact protection.展开更多
association with academic and clinical performance.This study aimed to determine the EI level of hospital-based nursing students and examine differences between full-time and part-time students.Methods:We conducted a ...association with academic and clinical performance.This study aimed to determine the EI level of hospital-based nursing students and examine differences between full-time and part-time students.Methods:We conducted a cross-sectional study in a hospital-based nursing school.EI level was measured using the Schutte Self-report Emotional Intelligence Scale(SSEIS).Results:We recruited 287 participants(mean age:21.9 years).Their mean SSEIS score was 119.6(95%CI=118.57-120.65).The mean SSEIS scores of 172 full-time and 115 part-time nurses were 120.7(95%CI=119.3-122.0)and 118.1(95%CI=116.5-119.6),respectively.There was no significant difference between the groups.Conclusion:The EI difference between full-time and part-time nursing students was statistically insignificant.The need for further EI development among both full-time and part-time students must be addressed.展开更多
Objective:This study aimed to examine the association between parent-child relationships and physically aggressive behavior among adolescents.Methods:This is a cross-sectional study that uses secondary data from the 2...Objective:This study aimed to examine the association between parent-child relationships and physically aggressive behavior among adolescents.Methods:This is a cross-sectional study that uses secondary data from the 2015 Indonesia Global School-Based Health Survey(IGSHS).Health surveys were conducted in 75 schools representing three regions(Sumatra,Java-Bali;Outer Sumatra;and Java-Bali)in 26 provinces and 68 districts/cities in Indonesia(N=10,139 students).Students who participated were aged 12-19 years,were enrolled in public schools in the junior and high school levels.Results:It has been seen that for most middle-aged adolescents(58.7%),their parents(25%-29%)pay less attention to academic assignments(homework),problems,and use of free time.The most significant factors that influence adolescents to commit violence are smoking and consuming alcohol.Adolescents who smoke are twice as likely to commit physical violence compared with adolescents who do not smoke(OR=2.005;95%CI=1.7062-2.396).Meanwhile,adolescents who consume alcohol are 1.8 times more likely to commit physical violence compared with adolescents who do not consume alcohol(OR=1.807;95%CI=1.421-2.298).Conclusions:Through educational activities and consultations,this study’s findings are valuable for establishing parenting programs among those concerned about their children’s aggressive behavior.Meanwhile,counseling programs can be started in schools by conducting self-detection of negative adolescent behavior,such as screening for smoking,alcohol consumption,sleep issues,and attempted suicide.展开更多
Objective:To study the relationship between qi stagnation constitution and suboptimal health status(SHS)or lifestyle.Methods:From 2012 to 2013,we conducted a cross-sectional survey of 24159 Chinese individuals aged 12...Objective:To study the relationship between qi stagnation constitution and suboptimal health status(SHS)or lifestyle.Methods:From 2012 to 2013,we conducted a cross-sectional survey of 24159 Chinese individuals aged 12-80 years.The qi stagnation constitution was assessed using the Constitution in Chinese Medicine Questionnaire.Health status was evaluated through medical records and the Subhealth Measurement Scale V1.0(SHMS V1.0).Health-promoting lifestyles were measured using the Health-Promoting Lifestyle Profile Ⅱ(HPLP-Ⅱ).Results:Of the 24159 participants,16.1%and 15.2%were classified as“always”and“sometimes”having the qi stagnation constitution,respectively.Those classified as“rarely”having the qi stagnation constitution scored higher on both the HPLP-Ⅱ and SHMS V1.0.The participants classified as“always”having the qi stagnation constitution showed a significant association with SHS or disease compared to other imbalanced constitutions.Those in the“always”category were approximately 21 times more likely to be classified as having SHS(odds ratio[OR]:21.17,95%confidence interval[CI]:15.74-28.45),whereas those in the“sometimes”category were approximately six times more likely(OR:5.89,95%CI:5.04-6.90).Accordingly,the qi stagnation constitution score was significantly associated with the diagnosis of SHS,with an area under the curve of 0.77(P<.001).A score of 18.75 yielded the highest Youden Index(0.407),with a sensitivity of 60.5%and a specificity of 80.3%.Significant associations were observed between health-promoting lifestyles and qi stagnation constitution severity in an ordinal regression analysis(P<.001).Protective factors included stress management(OR:1.59),self-actualization(OR:1.57),and exercise(OR:1.36).In contrast,poorer interpersonal relationships(OR:0.79),greater health responsibilities(OR:0.86),and poorer nutrition(OR:0.91)were associated with increased severity.Conclusion:Modulating the qi stagnation constitution through lifestyle interventions may help prevent the progression of SHS to disease,which aligns with core preventive principles in traditional Chinese medicine.展开更多
The downstream region of the Yangtze River in China experiences tidal influences, with most tributary inlets regulated by hydraulic hubs that control water diversion and drainage. The cross-sectional characteristics o...The downstream region of the Yangtze River in China experiences tidal influences, with most tributary inlets regulated by hydraulic hubs that control water diversion and drainage. The cross-sectional characteristics of these rivers under intermittent diversion and drainage remain uncertain due to various boundary conditions, including tidal fluctuations from the Yangtze River, hydraulic hub operations, and tributary water levels. This study examines the Yanglintang River as a case study, utilizing a two-dimensional water-sediment numerical model to analyze the response of river cross-sections under varying diversion-to-drainage ratios. The findings demonstrate that river cross-sections transform from a regular trapezoidal shape to a pot-bottom configuration, achieving equilibrium within 2 to 3 years under the influence of water diversion and drainage. The operational duration of water diversion and drainage shows minimal impact on river cross-sectional morphology, with bed scouring reaching approximately 10 cm when the operational duration doubles. However, the flow rate of water diversion-drainage operations emerges as the primary factor controlling river cross-sectional morphology, resulting in bed scouring magnitude of approximately 1 m under doubled flow rate conditions.展开更多
The scroll expander,as the core component of the micro-compressed air energy storage and power generation system,directly affects the output efficiency of the system.Meanwhile,the scroll profile plays a central role i...The scroll expander,as the core component of the micro-compressed air energy storage and power generation system,directly affects the output efficiency of the system.Meanwhile,the scroll profile plays a central role in determining the output performance of the scroll expander.In this study,in order to investigate the output characteristics of a variable cross-section scroll expander,numerical simulation and experimental studies were con-ducted by using Computational Fluid Dynamics(CFD)methods and dynamic mesh techniques.The impact of critical parameters on the output performance of the scroll expander was analyzed through the utilization of the control variable method.It is found that increasing the inlet pressure and temperature within a certain range can improve the output power of the scroll expander.However,the increase in temperature and meshing clearance leads to a decline in the overall output performance of the scroll expander,leading to a decrease in volumetric efficiency by 8.43%and 12.79%,respectively.The experiments demonstrate that under equal inlet pressure conditions,increasing the inlet temperature elevates both the rotational speed and torque output of the scroll expander.Specifically,compared to operating at normal temperatures,the output torque increases by 21.8%under high-temperature conditions.However,the rate of speed and torque variation decreases as a consequence of enlarged meshing clearance,resulting in increased internal leakage and reduction in isentropic efficiency.展开更多
This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are ob...This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are obtained.Pore structures are segmented by the U-shaped network(U-Net)neural network integrated with the Canny edge detection operator,ensuring accurate pore delineation and edge extraction.The trained U-Net achieves 98.55%accuracy.The 2D data are superimposed and processed into 3D point clouds,enabling reconstruction of the pore structure and aluminum skeleton.Analysis of pore 01 shows the cross-sectional area initially increases,and then decreases with milling depth,with a uniform point distribution of 40 per layer.The reconstructed model exhibits a porosity of 77.5%,with section overlap rates between the 2D pore segmentation and the reconstructed model exceeding 96%,confirming high fidelity.Equivalent sphere diameters decrease with size,averaging 1.95 mm.Compression simulations reveal that the stress-strain curve of the 3D reconstruction model of aluminum foam exhibits fluctuations,and the stresses in the reconstruction model concentrate on thin cell walls,leading to localized deformations.This method accurately restores the aluminum foam’s complex internal structure,improving reconstruction preci-sion and simulation reliability.The approach offers a cost-efficient,high-precision technique for optimizing material performance in engineering applications.展开更多
文摘This paper investigates the torsion analysis of coated bars with a rectangular cross-section. Two opposite faces of a bar are coated by two isotropie layers with different materials of the original substrate that are perfectly bonded to the bar. With the Saint- Venant torsion theory, the governing equation of the problem in terms of the warping function is established and solved using the finite Fourier cosine transform. The state of stress on the cross-section, warping of the cross-section, and torsional rigidity of the bar are evaluated. Effects of thickness of the coating layers and material properties on these quantities are investigated. A set of graphs are provided that can be used to determine the coating thicknesses and material properties so as to keep the maximum von Mises stress on the cross-section below an allowable value for effective use of the coating layer.
文摘Effect of temperature-dependent viscosity on fully developed forced convection in a duct of rectangular cross-section occupied by a fluid-saturated porous medium is investigated analytically. The Darcy flow model is applied and the viscosity-temperature relation is assumed to be an inverse-linear one. The case of uniform heat flux on the walls, i.e. the H boundary condition in the terminology of Kays and Crawford [12], is treated. For the case of a fluid whose viscosity decreases with temperature, it is found that the effect of the variation is to increase the Nusselt number for heated walls. Having found the velocity and the temperature distribution, the second law of thermodynamics is invoked to find the local and average entropy generation rate. Expressions for the entropy generation rate, the Bejan number, the heat transfer irreversibility, and the fluid flow irreversibility are presented in terms of the Brinkman number, the Péclet number, the viscosity variation number, the dimensionless wall heat flux, and the aspect ratio （width to height ratio）. These expressions let a parametric study of the problem based on which it is observed that the entropy generated due to flow in a duct of square cross-section is more than those of rectangular counterparts while increasing the aspect ratio decreases the entropy generation rate similar to what previously reported for the clear flow case by Ratts and Rant [14].
基金supported by the National Natural Science Foundation of China(82341245,82371491)the Chinese Central Government(Key Project of Public Health Program)the National Key Research and Development Program of China(2018YFC1311706,2018YFC1311702)。
文摘Objective This study aimed to determine the temporal trends in sleep duration among Chinese adults.Methods In this series of repeated nationally representative cross-sectional surveys(China Chronic Disease and Risk Factors Surveillance)conducted between 2010 and 2018,a total of 645,420 adult participants(97,741 in 2010;175,749 in 2013;187,777 in 2015;and 184,153 in 2018)were included in the trend analysis.Linear and logistic regression models were utilized to assess trends in sleep duration.Results In 2018,the estimated overall mean sleep duration among the Chinese adult population was7.58(SD,1.45)hours per day,with no significant trend from 2010.A significant increase in short sleep duration(≤6 hours)was observed in the total population,from 15.3%(95%CI:14.1%–16.5%)in 2010 to18.5%(95%CI:17.7%–19.3%)in 2018(P<0.001).Similarly,the trend in long sleep duration(>9 hours)was also significant,increasing in weighted prevalence from 7.2%(95%CI:6.3%–8.1%)in 2010 to 9.0%(95%CI:8.2%–9.9%)in 2018(P<0.001).Conclusion The prevalence of both short and long sleep durations significantly increased among Chinese adults from 2010 to 2018,highlighting the urgency of health initiatives to promote optimal sleep duration in China.
基金Projects(50575184,50975235) supported by the National Natural Science Foundation of ChinaProject(YF07057) supported by Science and Technology Development Program of Xi'an City,Shaanxi Province,China+1 种基金Project(NPU-FFR-200809) supported by Foundation for Fundamental Research of Northwestern Polytechnical University,ChinaProject(08-3) supported by State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology,China
文摘The cross-sectional distortion usually appears during rotary-draw bending process of thin-walled rectangular tube with small bending radius.To study the cross-sectional distortion of the tube,a three-dimensional finite-element model of the process was developed based on ABAQUS/Explicit code and its reliability was validated by experiment.Then,the cross-sectional distortion behaviors of the tube were investigated.The results show that a zone of larger circumferential stress appears on the tube when bending angle reaches 30°.And in the larger circumferential stress zone,the sagging phenomenon is produced obviously.The maximum cross-sectional distortion is located in the larger circumferential stress zone and the angle between the plane of maximum cross-sectional distortion and the bending reference plane is about 50°.The position of the maximum cross-sectional distortion keeps almost unchanged with the variation of the clearances between dies and tube.
基金the Science,Technology and Innovation Commission of Shenzhen Municipality of China(Nos.JCYJ20170306160003433 and JCYJ20180306171058717)111 Project of China(No.B08040)for the support given to this research。
文摘The bent double-ridged rectangular tube(DRRT)with high forming quality is helpful to improve the microwave transmission accuracy.For reducing the cross-sectional deformation in the H-typed bending process,in addition to using rigid mandrel to support the inside of tube,ridge groove fillers are also added to restrict the deformation of ridge grooves.Because of the change of stress and strain state of bent tube in bending,rigid mandrel retracting and specially twicespringback stages,and the springback of fillers,the cross-sectional deformation of tube in each stage may be different.Therefore,based on the ABAQUS platform,the finite element models(FEM)for H-typed bending,mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated.It is found that,for the height and width deformation of tube and spacing deformation of ridge grooves,retraction of mandrel can make the distribution of these deformations more uniform along the bending direction.The first springback can reduce these deformations significantly,which should be emphasized.But the second springback only increases them by less amount,which can be ignored.The smaller height deformation of ridge groove and filler can be neglected.
文摘Objective The relationship between non-high-density lipoprotein(NHDL)cholesterol to high-density lipoprotein cholesterol(HDL-C)ratio(NHHR)and stoke remains unknown.This study aimed to evaluate the association between the adult NHHR and stroke occurrence in the United States of America(USA).Methods To clarify the relationship between the NHHR and stroke risk,this study used a multivariable logistic regression model and a restricted cubic spline(RCS)model to investigate the association between the NHHR and stroke,and data from the National Health and Nutrition Examination Survey(NHANES)from 2005 to 2018.Subgroup and sensitivity analyses were conducted to test the robustness of the results.Results This study included 29,928 adult participants,of which 1,165 participants had a history of stroke.Logistic regression analysis of variables demonstrated a positive association between NHHR and stroke(OR 1.24,95%CI:1.03-1.50,P=0.026).Compared with the lowest reference group of NHHR,participants in the second,third,and fourth quartile had a significantly increased risk of stroke after full adjustments(OR:1.35,95%CI:1.08-1.69)(OR:1.83,95%CI:1.42-2.36)(OR:2.04,95%CI:1.50-2.79).In the total population,a nonlinear dose-response relationship was observed between the NHHR and stroke risk(P non-linearity=0.002).This association remained significant in several subgroup analyses.Further investigation of the NHHR may enhance our understanding of stroke prevention and treatment.Conclusion Our findings suggest a positive correlation between the NHHR and an increased prevalence of stroke,potentially serving as a novel predictive factor for stroke.Timely intervention and management of the NHHR may effectively mitigate stroke occurrence.Prospective studies are required to validate this association and further explore the underlying biological mechanisms.
基金supporting by the Science and Technology Project of Shenzhen of China(Nos.JCYJ20170306160003433 and JCYJ20180306171058717)the National Natural Science Foundation of China(No.51375392)。
文摘Different yield criterion has great difference in predicting the deformation of tube with different material.In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangular tube(DRRT)during rotary draw bending(RDB)process,Mises isotropic yield criterion,Hill’48 and Barlat/Lian anisotropic yield criteria commonly used in practical engineering are introduced to simulate RDB of DRRT.The inverse method combining uniaxial tensile test of whole tube and response surface methodology was proposed to identify the parameters of Hill’48 and Barlat/Lian yield criteria of small-sized H96 brass extrusion DRRT as well.Then based on ABAQUS/Explicit platform,the FE models of RDB process of DRRT considering Mises,Hill’48 and Barlat/Lian yield criteria were built.The results show that:The variation trend of cross-sectional deformation ratio is same when using different yield criteria.The cross-sectional deformation ratio by using Mises yield criterion is close to that by using Hill’48 yield criterion.However,there is a quite difference between by using Barlat/Lian yield criterion and by using Mises or Hill’48 yield criteria.The prediction values of cross-sectional height deformation by using three yield criteria all underestimate the experiment ones,and the prediction values of cross-sectional width deformation overestimate the experiment ones.By comparing the simulation results of cross-sectional deformation of the DRRT with different yield criteria and experiment ones,Barlat/Lian yield criterion is found to be suitable for describing the RDB process of DRRT.
基金financially supported by Guangdong Province Basic and Applied Basic Research Fund Project(Grant No.2022B1515250009)Liaoning Provincial Natural Science Foundation-Doctoral Research Start-up Fund Project(Grant No.2024-BSBA-05)+1 种基金Major Science and Technology Innovation Project in Shandong Province(Grant No.2024CXGC010803)the National Natural Science Foundation of China(Grant Nos.52271269 and 12302147).
文摘The umbilical,a key component in offshore energy extraction,plays a vital role in ensuring the stable operation of the entire production system.The extensive variety of cross-sectional components creates highly complex layout combinations.Furthermore,due to constraints in component quantity and geometry within the cross-sectional layout,filler bodies must be incorporated to maintain cross-section performance.Conventional design approaches based on manual experience suffer from inefficiency,high variability,and difficulties in quantification.This paper presents a multi-level automatic filling optimization design method for umbilical cross-sectional layouts to address these limitations.Initially,the research establishes a multi-objective optimization model that considers compactness,balance,and wear resistance of the cross-section,employing an enhanced genetic algorithm to achieve a near-optimal layout.Subsequently,the study implements an image processing-based vacancy detection technique to accurately identify cross-sectional gaps.To manage the variability and diversity of these vacant regions,the research introduces a multi-level filling method that strategically selects and places filler bodies of varying dimensions,overcoming the constraints of uniform-size fillers.Additionally,the method incorporates a hierarchical strategy that subdivides the complex cross-section into multiple layers,enabling layer-by-layer optimization and filling.This approach reduces manufac-turing equipment requirements while ensuring practical production process feasibility.The methodology is validated through a specific umbilical case study.The results demonstrate improvements in compactness,balance,and wear resistance compared with the initial cross-section,offering novel insights and valuable references for filler design in umbilical cross-sections.
基金supported by an Innovation Fund for Medical Sciences of the Chinese Academy of Medical Sciences (Grant No.2019-I2M-2-007).
文摘Objective:Postpartum nutrition plays a critical role in maternal recovery and long-term health.However,the nutritional status of working mothers in the postpartum period remains understudied.This study aimed to assess the dietary quality of postpartum women in urban Beijing,identify occupational-related factors influencing their diet,and explore potential interventions to improve maternal nutrition during the postpartum period.Methods:In this cross-sectional analysis,554 women one year after delivery were recruited from ten community health centers.Sociodemographic,occupational and postpartum care variables were collected via questionnaire.Dietary intake over the preceding year was assessed using a food frequency questionnaire.The modified dietary balance index for postpartum women were used for dietary quality assessment.Results:The study revealed severe dietary imbalances among postpartum women,characterized by excessive consumption of cereals,eggs,and meats,while their intake of vegetables,fruits,and dairy products was inadequate.According to dietary balance index for postpartum women,66.25%of mothers showed varying degrees of excessive intake.45.31%of mothers experienced varying levels of insufficient intake,with only 19.86%of participants having a relatively balanced diet.Occupational differences were observed,with women in the commercial employment group showing higher levels of excessive food intake.The analysis of influencing factors showed that family monthly income,maternity leave,and postpartum care significantly affected the dietary quality.Conclusions:Postpartum women in Beijing experience widespread dietary imbalances,with both excesses and deficiencies.Occupational context and related factors significantly shape diet quality.These findings highlight the need for targeted nutritional interventions tailored to the specific challenges of different occupational groups.
基金National Nonprofit Institute Research Grant for the Institute of Basic Theory for Chinese Medicine,China Academy of Chinese Medical Sciences:Mechanism of Regulating Phlegm-Dampness Constitution to Prevent Metabolic Diseases based on Gut Microbiota-host DNA Methylation(No.YZ-202151)。
文摘OBJECTIVE:To investigate the difference in gut microbiota between population with damp-heat constitution(DHC)and balanced constitution(BC).METHODS:A multi-centered cross-sectional casecontrol study was conducted,which included 249 participants with damp-heat constitution or balanced constitution.Baseline information of participants was collected,and stool samples were collected for gut microbiota analysis.Principal coordinate analysis,linear discriminant analysis effect size analysis,receiver operating characteristic,random forest model,and phylogenetic investigation of communities by reconstruction of unobserved states methods were used to reveal the relationship between gut microbiota and the damp-heat constitution.RESULTS:Compared to those in the BC group,the richness and diversity of the microbiota,specifically those of several short-chain fatty acid producing genera such as Barnesiella,Coprobacter,and Butyricimonas,were significantly decreased in the DHC group.Regarding biological functions,flavonoid biosynthesis,propanoate metabolism,and nucleotide sugar metabolism were suppressed,while arachidonic acid metabolism and glutathione metabolism were enriched in the DHC group.Finally,a classifier based on the microbiota was constructed to discriminate between the DHC and BC populations.CONCLUSION:The gut microbiota of the DHC population exhibits significantly reduced diversity and is closely related to inflammation,metabolic disorders,and liver steatosis,which is consistent with clinical observations,thus serving as a potential diagnostic tool for traditional Chinese medicine constitution discrimination.
基金supported by the National Natural Science Foundation of China (Grant Nos.52304227 and 52104133)Scientific and Technological Research Platform for Disaster Prevention and Control of Deep Coal Mining (Anhui University of Science and Technology) (Grant No.DPDCM2208).
文摘To investigate the effects of the maximum principal stress direction(θ)and cross-section shape on the failure characteristics of sandstone,true-triaxial compression experiments were conducted using cubic samples with rectangular,circular,and D-shaped holes.Asθincreases from 0°to 60°in the rectangular hole,the left failure location shifts from the left corner to the left sidewall,the left corner,and then the floor,while the right failure location shifts from the right corner to the right sidewall,right roof corner,and then the roof.Furthermore,the initial failure vertical stress first decreases and then increases.In comparison,the failure severity in the rectangular hole decreases for variousθvalues as 30°>45°>60°>0°.With increasingθ,the fractal dimension(D)of rock slices first increases and then decreases.For the rectangular and D-shaped holes,whenθ=0°,30°,and 90°,D for the rectangular hole is less than that of the D-shaped hole.Whenθ=45°and 60°,D for the rectangular hole is greater than that of the D-shaped hole.Theoretical analysis indicates that the stress concentration at the rectangular and D-shaped corners is greater than the other areas.The failure location rotates with the rotation ofθ,and the failure occurs on the side with a high concentration of compressive stress,while the side with the tensile and compressive stresses remains relatively stable.Therefore,the fundamental reason for the rotation of failure location is the rotation of stress concentration,and the external influencing factor is the rotation ofθ.
基金supported by the Innovation Team and Talents Cultivation Program of National Administration of Traditional Chinese Medicine(ZYYCXTD-C-202006)the High-level traditional Chinese medicine key subject construction project of National Administration of Traditional Chinese Medicine-Evidence-based Traditional Chinese Medicine(ZYYZDXK-2023249).
文摘Background:The bibliometrics of acupuncture are growing rapidly.However,the absence of reporting guidelines may lead to significant duplication and waste,thereby undermining the research’s value.To address this,a knowledge mapping was generated based on published studies to investigate the characteristics of bibliometric studies on acupuncture and the extent of duplicate publications,with the overarching goal of providing a comprehensive overview of the knowledge structure in this field.Methods:This cross-sectional study used three databases(PubMed,Web of Science,and Scopus)to identify relevant studies up to May 1,2024.In addition,the reference lists were retrieved as a supplement.To track research trends,we employed Microsoft Excel and R software to extract,code,and analyze information.Study selection,data extraction,and validation were performed independently by at least two reviewers.The reporting quality of included studies was assessed using the Preliminary guideline for reporting bibliometric reviews of the biomedical literature(BIBLIO).Results:Among the 6,221 bibliometric reviews examined,113 relevant publications were identified,80 focusing on various diseases/conditions.The annual number of publications has gradually increased,with the output in the past four years being 3.52 times higher than that before 2020.China(106)and Chengdu University of Traditional Chinese Medicine(16)have the highest number of publications.The most prolific author is Fan-Rong Liang,with six articles.The first bibliometric study,by Hai-Yan Li,was published in 2010.Journal of Pain Research,with 36 articles,holds the most publications.The top three diseases:diseases of the nervous system;symptoms,signs,or clinical findings not elsewhere classified;and mental,behavioral,or neurodevelopmental disorders.There may be potential duplication in research on 13 diseases/conditions,notably stroke,migraine,pain/analgesia,cancer pain,shoulder pain,facial paralysis/bell’s palsy,chronic pain,and cognitive impairment.In BIBLIO,the most frequently missing items are issues/topics(item 2),quality assessment(item 11),and descriptive findings(item 13).Conclusion:This study demonstrates that acupuncture bibliometrics is actively utilized to identify dominant diseases/conditions,aiding scholars in understand the knowledge structure and main topics.Although the number of related studies is increasing,with an average of 25 studies annually,overlap in some areas highlights the need for adherence to reporting guidelines and careful topic selection to ensure truly valuable insights and knowledge contributions.The adherence to BIBLIO’s 20 proposed items across analyzed articles,highlighting important in reporting practices.
基金funded by Tianjin Key Medical Discipline(Specialty)Construction Project,China(Grant No.TJYXZDXK-011A)Tianjin Medical University Cancer Institute&Hospital Nursing Special Fund Project(H2304)。
文摘Objectives:This study aimed to classify young breast cancer patients into distinct ambivalence over emotional expression and to explore the factors influencingthe level of ambivalence over emotional expression.Methods:A total of 217 young breast cancer patients were enrolled from a tertiary Grade A oncology hospital in Tianjin,China,using the convenience sampling method.All participants completed the general questionnaire,Ambivalence over Emotion Expression Questionnaire(AEQ),and Family Adapt-Ability and Cohesion Evaluation Scales-Chinese Version(FACES-CV).We employed exploratory latent profileanalysis for ambivalence over emotional expression profilingand logistic regression analysis to identify the influentialfactors Results:The results of the latent profileanalysis supported the models of four latent profiles,which were definedas“low conflict-lowexpression reflection”(19.2%),“high conflict-high inhibition expression”(43.9%),“moderate conflict-highregret expression”(18.1%),and“moderate conflict-desire understand”(18.8%).Logistic regression revealed that family cohesion,marital status,residence,per capita monthly income,and cancer stage were the influencingfactors of ambivalence over emotional expression in young breast cancer patients(P<0.05)Conclusions:Levels of ambivalence over emotional expression ameast cancer patients with breast cancer were highly heterogeneous.Medical staff should provide psychological counseling and health education tailored to the unique characteristics of emotional expression ambivalence in different patient groups to promote healthy emotional expression among patients.
基金supported by the National Natural Science Foundation of China(Grant Nos.11922206 and 11832011)theMajor Project of Science and Technology Innovation 2030(Grant No.2021ZD0113100)the 111 Project(Grant No.B16015).
文摘The coconut structure exhibits inherent impact resistance,with the macroscopically ordered distribution of variable crosssection fibers in its husk playing a crucial role in stress wave propagation and scaling.Inspired by the natural structure and fibers,this study proposes a stress wave propagation model for a variable cross-section bar considering viscous effects.A theoretical model for stress wave propagation in a fusiform-shaped bar with variable cross-section is established,elucidating the stress wave scaling effect observed in coconut fibers.Additionally,a quasi-one-dimensional method for analyzing and measuring stress wave propagation is introduced,and an experimental setup is assembled.Experimental validation of the stress wave scaling effect confirms the theory’s accuracy for stress wave scaling in variable cross-section bars.This research provides theoretical guidance and measurement methods for the design of space landers,automobile anti-collision beams,stress wave collectors,and scalers,as well as for impact testing of macro and micro materials and the design of sustainable plant-based materials for impact protection.
文摘association with academic and clinical performance.This study aimed to determine the EI level of hospital-based nursing students and examine differences between full-time and part-time students.Methods:We conducted a cross-sectional study in a hospital-based nursing school.EI level was measured using the Schutte Self-report Emotional Intelligence Scale(SSEIS).Results:We recruited 287 participants(mean age:21.9 years).Their mean SSEIS score was 119.6(95%CI=118.57-120.65).The mean SSEIS scores of 172 full-time and 115 part-time nurses were 120.7(95%CI=119.3-122.0)and 118.1(95%CI=116.5-119.6),respectively.There was no significant difference between the groups.Conclusion:The EI difference between full-time and part-time nursing students was statistically insignificant.The need for further EI development among both full-time and part-time students must be addressed.
文摘Objective:This study aimed to examine the association between parent-child relationships and physically aggressive behavior among adolescents.Methods:This is a cross-sectional study that uses secondary data from the 2015 Indonesia Global School-Based Health Survey(IGSHS).Health surveys were conducted in 75 schools representing three regions(Sumatra,Java-Bali;Outer Sumatra;and Java-Bali)in 26 provinces and 68 districts/cities in Indonesia(N=10,139 students).Students who participated were aged 12-19 years,were enrolled in public schools in the junior and high school levels.Results:It has been seen that for most middle-aged adolescents(58.7%),their parents(25%-29%)pay less attention to academic assignments(homework),problems,and use of free time.The most significant factors that influence adolescents to commit violence are smoking and consuming alcohol.Adolescents who smoke are twice as likely to commit physical violence compared with adolescents who do not smoke(OR=2.005;95%CI=1.7062-2.396).Meanwhile,adolescents who consume alcohol are 1.8 times more likely to commit physical violence compared with adolescents who do not consume alcohol(OR=1.807;95%CI=1.421-2.298).Conclusions:Through educational activities and consultations,this study’s findings are valuable for establishing parenting programs among those concerned about their children’s aggressive behavior.Meanwhile,counseling programs can be started in schools by conducting self-detection of negative adolescent behavior,such as screening for smoking,alcohol consumption,sleep issues,and attempted suicide.
基金supported by the National Natural Science Foundation of China(T2341019)NSFC-Guangdong Joint Fund(U1132001)+9 种基金General Program of the National Natural Science Foundation of China(82174243 and 82204948)Natural Science Foundation of Guangdong Province,China(2023A1515110757)Guangzhou Science and Technology Plan Project(2024B03J1343)Major Scientific and Technological Project of Guangzhou Municipal Health Commission(20252D003)Research Project of Traditional Chinese Medicine Bureau of Guangdong Province(20241208)General project of Beijing Natural Science Foundation(7242227)Fundamental Research Funds for the Central Universities(BZY-JMZY-2022-001 and 2023-JYB-JBZD-009)High-level Key Discipline of the National Administration of Traditional Chinese Medicine-Traditional Chinese Constitutional Medicine(zyyzdxk-2023251)Major Science and Technology Special Projects in Hubei Province(2023BCA005)the Chief Scientist Research Project of Hubei Shizhen Laboratory(HSL2024SX0002).
文摘Objective:To study the relationship between qi stagnation constitution and suboptimal health status(SHS)or lifestyle.Methods:From 2012 to 2013,we conducted a cross-sectional survey of 24159 Chinese individuals aged 12-80 years.The qi stagnation constitution was assessed using the Constitution in Chinese Medicine Questionnaire.Health status was evaluated through medical records and the Subhealth Measurement Scale V1.0(SHMS V1.0).Health-promoting lifestyles were measured using the Health-Promoting Lifestyle Profile Ⅱ(HPLP-Ⅱ).Results:Of the 24159 participants,16.1%and 15.2%were classified as“always”and“sometimes”having the qi stagnation constitution,respectively.Those classified as“rarely”having the qi stagnation constitution scored higher on both the HPLP-Ⅱ and SHMS V1.0.The participants classified as“always”having the qi stagnation constitution showed a significant association with SHS or disease compared to other imbalanced constitutions.Those in the“always”category were approximately 21 times more likely to be classified as having SHS(odds ratio[OR]:21.17,95%confidence interval[CI]:15.74-28.45),whereas those in the“sometimes”category were approximately six times more likely(OR:5.89,95%CI:5.04-6.90).Accordingly,the qi stagnation constitution score was significantly associated with the diagnosis of SHS,with an area under the curve of 0.77(P<.001).A score of 18.75 yielded the highest Youden Index(0.407),with a sensitivity of 60.5%and a specificity of 80.3%.Significant associations were observed between health-promoting lifestyles and qi stagnation constitution severity in an ordinal regression analysis(P<.001).Protective factors included stress management(OR:1.59),self-actualization(OR:1.57),and exercise(OR:1.36).In contrast,poorer interpersonal relationships(OR:0.79),greater health responsibilities(OR:0.86),and poorer nutrition(OR:0.91)were associated with increased severity.Conclusion:Modulating the qi stagnation constitution through lifestyle interventions may help prevent the progression of SHS to disease,which aligns with core preventive principles in traditional Chinese medicine.
基金financially supported by the National Key Research and Development Program of China (Grant No.2023YFC3208604)Jiangsu Province Water Conservancy Science and Technology Project (Grant No.2023052)the National Natural Science Foundation of China (Grant No.51509168)。
文摘The downstream region of the Yangtze River in China experiences tidal influences, with most tributary inlets regulated by hydraulic hubs that control water diversion and drainage. The cross-sectional characteristics of these rivers under intermittent diversion and drainage remain uncertain due to various boundary conditions, including tidal fluctuations from the Yangtze River, hydraulic hub operations, and tributary water levels. This study examines the Yanglintang River as a case study, utilizing a two-dimensional water-sediment numerical model to analyze the response of river cross-sections under varying diversion-to-drainage ratios. The findings demonstrate that river cross-sections transform from a regular trapezoidal shape to a pot-bottom configuration, achieving equilibrium within 2 to 3 years under the influence of water diversion and drainage. The operational duration of water diversion and drainage shows minimal impact on river cross-sectional morphology, with bed scouring reaching approximately 10 cm when the operational duration doubles. However, the flow rate of water diversion-drainage operations emerges as the primary factor controlling river cross-sectional morphology, resulting in bed scouring magnitude of approximately 1 m under doubled flow rate conditions.
基金funded by the National Key Research and Development Program of China(No.2024YFE0208100).
文摘The scroll expander,as the core component of the micro-compressed air energy storage and power generation system,directly affects the output efficiency of the system.Meanwhile,the scroll profile plays a central role in determining the output performance of the scroll expander.In this study,in order to investigate the output characteristics of a variable cross-section scroll expander,numerical simulation and experimental studies were con-ducted by using Computational Fluid Dynamics(CFD)methods and dynamic mesh techniques.The impact of critical parameters on the output performance of the scroll expander was analyzed through the utilization of the control variable method.It is found that increasing the inlet pressure and temperature within a certain range can improve the output power of the scroll expander.However,the increase in temperature and meshing clearance leads to a decline in the overall output performance of the scroll expander,leading to a decrease in volumetric efficiency by 8.43%and 12.79%,respectively.The experiments demonstrate that under equal inlet pressure conditions,increasing the inlet temperature elevates both the rotational speed and torque output of the scroll expander.Specifically,compared to operating at normal temperatures,the output torque increases by 21.8%under high-temperature conditions.However,the rate of speed and torque variation decreases as a consequence of enlarged meshing clearance,resulting in increased internal leakage and reduction in isentropic efficiency.
基金supported by the Key Research and DevelopmentPlan in Shanxi Province of China(No.201803D421045)the Natural Science Foundation of Shanxi Province(No.2021-0302-123104)。
文摘This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are obtained.Pore structures are segmented by the U-shaped network(U-Net)neural network integrated with the Canny edge detection operator,ensuring accurate pore delineation and edge extraction.The trained U-Net achieves 98.55%accuracy.The 2D data are superimposed and processed into 3D point clouds,enabling reconstruction of the pore structure and aluminum skeleton.Analysis of pore 01 shows the cross-sectional area initially increases,and then decreases with milling depth,with a uniform point distribution of 40 per layer.The reconstructed model exhibits a porosity of 77.5%,with section overlap rates between the 2D pore segmentation and the reconstructed model exceeding 96%,confirming high fidelity.Equivalent sphere diameters decrease with size,averaging 1.95 mm.Compression simulations reveal that the stress-strain curve of the 3D reconstruction model of aluminum foam exhibits fluctuations,and the stresses in the reconstruction model concentrate on thin cell walls,leading to localized deformations.This method accurately restores the aluminum foam’s complex internal structure,improving reconstruction preci-sion and simulation reliability.The approach offers a cost-efficient,high-precision technique for optimizing material performance in engineering applications.
