Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dua...Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.展开更多
Every year, around the world, between 250,000 and 500,000 people suffer a spinal cord injury(SCI). SCI is a devastating medical condition that arises from trauma or disease-induced damage to the spinal cord, disruptin...Every year, around the world, between 250,000 and 500,000 people suffer a spinal cord injury(SCI). SCI is a devastating medical condition that arises from trauma or disease-induced damage to the spinal cord, disrupting the neural connections that allow communication between the brain and the rest of the body, which results in varying degrees of motor and sensory impairment. Disconnection in the spinal tracts is an irreversible condition owing to the poor capacity for spontaneous axonal regeneration in the affected neurons.展开更多
Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements ...Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.展开更多
To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens...To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.展开更多
An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning appr...Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.展开更多
The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,th...The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.展开更多
During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive...During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.展开更多
Programmed cell death(PCD)plays a crucial role in the biological processes of living organisms and occurs in various forms,such as apoptosis,necroptosis and ferroptosis.However,traditional methods for PCD analysis are...Programmed cell death(PCD)plays a crucial role in the biological processes of living organisms and occurs in various forms,such as apoptosis,necroptosis and ferroptosis.However,traditional methods for PCD analysis are time-consuming and complex.In this paper,we propose a facile surface-enhanced Raman spectroscopy(SERS)-based strategy for the real-time analysis of three PCD patterns utilizing black phosphorus–gold nanoparticles(BP–Au NPs)as the ultrasensitive unlabeled Raman probe.BP–Au NPs,which possess excellent biocompatibility,are capable of detecting dye molecules at concentrations as low as 5×10^(-8)M and remain stable for at least one week in different physiological environments.In view of this,BP–Au NPs-based SERS technique can distinguish the tiny differences in the molecular fingerprints of cancer cells undergoing three PCD patterns(apoptosis,necroptosis and ferroptosis)triggered by doxorubicin,shikonin and erastin,respectively.We also have real-time monitoring of the intracellular molecular events during PCD,which spy the fluctuations of some typical SERS bands assigned to protein,DNA and lipid,revealing the unique phenotypic characteristics of each PCD pattern.This strategy provides a detailed and comprehensive analysis of the mechanisms of drug-induced PCD at the Raman level.展开更多
Over the last two decades,the dogma that cell fate is immutable has been increasingly challenged,with important implications for regenerative medicine.The brea kth rough discovery that induced pluripotent stem cells c...Over the last two decades,the dogma that cell fate is immutable has been increasingly challenged,with important implications for regenerative medicine.The brea kth rough discovery that induced pluripotent stem cells could be generated from adult mouse fibroblasts is powerful proof that cell fate can be changed.An exciting extension of the discovery of cell fate impermanence is the direct cellular reprogram ming hypothesis-that terminally differentiated cells can be reprogrammed into other adult cell fates without first passing through a stem cell state.展开更多
The brain's extracellular matrix(ECM),which is comprised of protein and glycosaminoglycan(GAG)scaffolds,constitutes 20%-40% of the human brain and is considered one of the largest influencers on brain cell functio...The brain's extracellular matrix(ECM),which is comprised of protein and glycosaminoglycan(GAG)scaffolds,constitutes 20%-40% of the human brain and is considered one of the largest influencers on brain cell functioning(Soles et al.,2023).Synthesized by neural and glial cells,the brain's ECM regulates a myriad of homeostatic cellular processes,including neuronal plasticity and firing(Miyata et al.,2012),cation buffering(Moraws ki et al.,2015),and glia-neuron interactions(Anderson et al.,2016).Considering the diversity of functions,dynamic remodeling of the brain's ECM indicates that this understudied medium is an active participant in both normal physiology and neurological diseases.展开更多
Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter...Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.展开更多
Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequent...Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequential Convex Programming(SFC-SCP)to improve the computation efficiency and reliability of trajectory generation.SFC-SCP combines the front-end convex polyhedron SFC construction and back-end SCP-based trajectory optimization.A Sparse A^(*)Search(SAS)driven SFC construction method is designed to efficiently generate polyhedron SFC according to the geometric relation among obstacles and collision-free waypoints.Via transforming the nonconvex obstacle-avoidance constraints to linear inequality constraints,SFC can mitigate infeasibility of trajectory planning and reduce computation complexity.Then,SCP casts the nonlinear trajectory optimization subject to SFC into convex programming subproblems to decrease the problem complexity.In addition,a convex optimizer based on interior point method is customized,where the search direction is calculated via successive elimination to further improve efficiency.Simulation experiments on dense obstacle scenarios show that SFC-SCP can generate dynamically feasible safe trajectory rapidly.Comparative studies with state-of-the-art SCP-based methods demonstrate the efficiency and reliability merits of SFC-SCP.Besides,the customized convex optimizer outperforms off-the-shelf optimizers in terms of computation time.展开更多
Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptabilit...Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptability and safety.Various materials and actuation strategies have been developed for creating soft robots,among which,ferromagnetic soft materials that self-actuate in response to external magnetic fields have attracted worldwide attention due to their remote controllability and excellent compatibil-ity with biological tissues.This review presents comprehensive and systematic research advancements in the design,fabrication,and applications of ferromagnetic soft materials for miniature robots,providing in-sights into their potential use in biomedical fields and beyond.The programming strategies of ferromag-netic soft materials are summarized and classified,including mold-assisted programming,3D printing-assisted programming,microassembly-assisted programming,and magnetization reprogramming.Each approach possesses unique advantages in manipulating the magnetic responsiveness of ferromagnetic soft materials to achieve outstanding actuation and deformation performances.We then discuss the biomedi-cal applications of ferromagnetic soft material-based soft robots(e.g.,minimally invasive surgery,targeted delivery,and tissue engineering),highlighting their potentials in revolutionizing biomedical technologies.This review also points out the current challenges and provides insights into future research directions,which we hope can serve as a useful reference for the development of next-generation adaptive miniature robots.展开更多
A user-programmable computational/control platform was developed at the University of Toronto that offers real-time hybrid simulation （RTHS） capabilities. The platform was verified previously using several linear ph...A user-programmable computational/control platform was developed at the University of Toronto that offers real-time hybrid simulation （RTHS） capabilities. The platform was verified previously using several linear physical substructures. The study presented in this paper is focused on further validating the RTHS platform using a nonlinear viscoelastic-plastic damper that has displacement, frequency and temperature-dependent properties. The validation study includes damper component characterization tests, as well as RTHS of a series of single-degree-of-freedom （SDOF） systems equipped with viscoelastic-plastic dampers that represent different structural designs. From the component characterization tests, it was found that for a wide range of excitation frequencies and friction slip loads, the tracking errors are comparable to the errors in RTHS of linear spring systems. The hybrid SDOF results are compared to an independently validated thermal- mechanical viscoelastic model to further validate the ability for the platform to test nonlinear systems. After the validation, as an application study, nonlinear SDOF hybrid tests were used to develop performance spectra to predict the response of structures equipped with damping systems that are more challenging to model analytically. The use of the experimental performance spectra is illustrated by comparing the predicted response to the hybrid test response of 2DOF systems equipped with viscoelastic-plastic dampers.展开更多
Learning-based methods have become mainstream for solving residential energy scheduling problems. In order to improve the learning efficiency of existing methods and increase the utilization of renewable energy, we pr...Learning-based methods have become mainstream for solving residential energy scheduling problems. In order to improve the learning efficiency of existing methods and increase the utilization of renewable energy, we propose the Dyna actiondependent heuristic dynamic programming(Dyna-ADHDP)method, which incorporates the ideas of learning and planning from the Dyna framework in action-dependent heuristic dynamic programming. This method defines a continuous action space for precise control of an energy storage system and allows online optimization of algorithm performance during the real-time operation of the residential energy model. Meanwhile, the target network is introduced during the training process to make the training smoother and more efficient. We conducted experimental comparisons with the benchmark method using simulated and real data to verify its applicability and performance. The results confirm the method's excellent performance and generalization capabilities, as well as its excellence in increasing renewable energy utilization and extending equipment life.展开更多
The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for he...The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for healthcare systems,particularly for identifying actions critical to patient well-being.However,challenges such as high computational demands,low accuracy,and limited adaptability persist in Human Motion Recognition(HMR).While some studies have integrated HMR with IoT for real-time healthcare applications,limited research has focused on recognizing MRHA as essential for effective patient monitoring.This study proposes a novel HMR method tailored for MRHA detection,leveraging multi-stage deep learning techniques integrated with IoT.The approach employs EfficientNet to extract optimized spatial features from skeleton frame sequences using seven Mobile Inverted Bottleneck Convolutions(MBConv)blocks,followed by Convolutional Long Short Term Memory(ConvLSTM)to capture spatio-temporal patterns.A classification module with global average pooling,a fully connected layer,and a dropout layer generates the final predictions.The model is evaluated on the NTU RGB+D 120 and HMDB51 datasets,focusing on MRHA such as sneezing,falling,walking,sitting,etc.It achieves 94.85%accuracy for cross-subject evaluations and 96.45%for cross-view evaluations on NTU RGB+D 120,along with 89.22%accuracy on HMDB51.Additionally,the system integrates IoT capabilities using a Raspberry Pi and GSM module,delivering real-time alerts via Twilios SMS service to caregivers and patients.This scalable and efficient solution bridges the gap between HMR and IoT,advancing patient monitoring,improving healthcare outcomes,and reducing costs.展开更多
Three-dimensional(3D)single molecule localization microscopy(SMLM)plays an important role in biomedical applications,but its data processing is very complicated.Deep learning is a potential tool to solve this problem....Three-dimensional(3D)single molecule localization microscopy(SMLM)plays an important role in biomedical applications,but its data processing is very complicated.Deep learning is a potential tool to solve this problem.As the state of art 3D super-resolution localization algorithm based on deep learning,FD-DeepLoc algorithm reported recently still has a gap with the expected goal of online image processing,even though it has greatly improved the data processing throughput.In this paper,a new algorithm Lite-FD-DeepLoc is developed on the basis of FD-DeepLoc algorithm to meet the online image processing requirements of 3D SMLM.This new algorithm uses the feature compression method to reduce the parameters of the model,and combines it with pipeline programming to accelerate the inference process of the deep learning model.The simulated data processing results show that the image processing speed of Lite-FD-DeepLoc is about twice as fast as that of FD-DeepLoc with a slight decrease in localization accuracy,which can realize real-time processing of 256×256 pixels size images.The results of biological experimental data processing imply that Lite-FD-DeepLoc can successfully analyze the data based on astigmatism and saddle point engineering,and the global resolution of the reconstructed image is equivalent to or even better than FD-DeepLoc algorithm.展开更多
基金supported by the National Institute of Health(R37CA240806,U01CA288351,and R50CA283816)support from UCI Chao Family Comprehensive Cancer Center(P30CA062203).
文摘Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.
基金financially supported by Ministerio de Ciencia e Innovación projects SAF2017-82736-C2-1-R to MTMFin Universidad Autónoma de Madrid and by Fundación Universidad Francisco de Vitoria to JS+2 种基金a predoctoral scholarship from Fundación Universidad Francisco de Vitoriafinancial support from a 6-month contract from Universidad Autónoma de Madrida 3-month contract from the School of Medicine of Universidad Francisco de Vitoria。
文摘Every year, around the world, between 250,000 and 500,000 people suffer a spinal cord injury(SCI). SCI is a devastating medical condition that arises from trauma or disease-induced damage to the spinal cord, disrupting the neural connections that allow communication between the brain and the rest of the body, which results in varying degrees of motor and sensory impairment. Disconnection in the spinal tracts is an irreversible condition owing to the poor capacity for spontaneous axonal regeneration in the affected neurons.
基金the support of the Major Science and Technology Project of Yunnan Province,China(Grant No.202502AD080007)the National Natural Science Foundation of China(Grant No.52378288)。
文摘Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.
基金supported by the National Natural Science Foundation of China(Grant No.42077244)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0434).
文摘To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
文摘Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.
基金supported by the National Natural Science Foundation of China(Grant No.62403486)。
文摘The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.
基金supported by the National Natural Sci‐ence Foundation of China(Grant No.62306325)。
文摘During the use of robotics in applications such as antiterrorism or combat,a motion-constrained pursuer vehicle,such as a Dubins unmanned surface vehicle(USV),must get close enough(within a prescribed zero or positive distance)to a moving target as quickly as possible,resulting in the extended minimum-time intercept problem(EMTIP).Existing research has primarily focused on the zero-distance intercept problem,MTIP,establishing the necessary or sufficient conditions for MTIP optimality,and utilizing analytic algorithms,such as root-finding algorithms,to calculate the optimal solutions.However,these approaches depend heavily on the properties of the analytic algorithm,making them inapplicable when problem settings change,such as in the case of a positive effective range or complicated target motions outside uniform rectilinear motion.In this study,an approach employing a high-accuracy and quality-guaranteed mixed-integer piecewise-linear program(QG-PWL)is proposed for the EMTIP.This program can accommodate different effective interception ranges and complicated target motions(variable velocity or complicated trajectories).The high accuracy and quality guarantees of QG-PWL originate from elegant strategies such as piecewise linearization and other developed operation strategies.The approximate error in the intercept path length is proved to be bounded to h^(2)/(4√2),where h is the piecewise length.
基金supported by the National Natural Science Foundation of China(62175071 and 32071399)the Guangdong Basic and Applied Basic Research Foundation(2021A1515011988 and 2021A1515110265)+2 种基金the Project of the Education Department of Guangdong Province,China(2021KTSCX238 and 2022ZDZX2077)the Project of Guangdong Food and Drug Vocational College(2020ZR01,2022ZR02 and 2024GCZX01)the Open Foundation of Key Laboratory of Optoelectronic Science and Technology for Medicine(Fujian Normal University),Ministry of Education,China(JYG2008 and JYG2009).
文摘Programmed cell death(PCD)plays a crucial role in the biological processes of living organisms and occurs in various forms,such as apoptosis,necroptosis and ferroptosis.However,traditional methods for PCD analysis are time-consuming and complex.In this paper,we propose a facile surface-enhanced Raman spectroscopy(SERS)-based strategy for the real-time analysis of three PCD patterns utilizing black phosphorus–gold nanoparticles(BP–Au NPs)as the ultrasensitive unlabeled Raman probe.BP–Au NPs,which possess excellent biocompatibility,are capable of detecting dye molecules at concentrations as low as 5×10^(-8)M and remain stable for at least one week in different physiological environments.In view of this,BP–Au NPs-based SERS technique can distinguish the tiny differences in the molecular fingerprints of cancer cells undergoing three PCD patterns(apoptosis,necroptosis and ferroptosis)triggered by doxorubicin,shikonin and erastin,respectively.We also have real-time monitoring of the intracellular molecular events during PCD,which spy the fluctuations of some typical SERS bands assigned to protein,DNA and lipid,revealing the unique phenotypic characteristics of each PCD pattern.This strategy provides a detailed and comprehensive analysis of the mechanisms of drug-induced PCD at the Raman level.
基金supported by Canada First Research Excellence Fund,Medicine by Design(to CMM)。
文摘Over the last two decades,the dogma that cell fate is immutable has been increasingly challenged,with important implications for regenerative medicine.The brea kth rough discovery that induced pluripotent stem cells could be generated from adult mouse fibroblasts is powerful proof that cell fate can be changed.An exciting extension of the discovery of cell fate impermanence is the direct cellular reprogram ming hypothesis-that terminally differentiated cells can be reprogrammed into other adult cell fates without first passing through a stem cell state.
基金supported by National Institute on Aging(NIH-NIA)R21 AG074152(to KMA)National Institute of Allergy and Infectious Diseases(NIAID)grant DP2 AI171150(to KMA)Department of Defense(DoD)grant AZ210089(to KMA)。
文摘The brain's extracellular matrix(ECM),which is comprised of protein and glycosaminoglycan(GAG)scaffolds,constitutes 20%-40% of the human brain and is considered one of the largest influencers on brain cell functioning(Soles et al.,2023).Synthesized by neural and glial cells,the brain's ECM regulates a myriad of homeostatic cellular processes,including neuronal plasticity and firing(Miyata et al.,2012),cation buffering(Moraws ki et al.,2015),and glia-neuron interactions(Anderson et al.,2016).Considering the diversity of functions,dynamic remodeling of the brain's ECM indicates that this understudied medium is an active participant in both normal physiology and neurological diseases.
文摘Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.
基金supported by the National Natural Science Foundation of China(No.62203256)。
文摘Generating dynamically feasible trajectory for fixed-wing Unmanned Aerial Vehicles(UAVs)in dense obstacle environments remains computationally intractable.This paper proposes a Safe Flight Corridor constrained Sequential Convex Programming(SFC-SCP)to improve the computation efficiency and reliability of trajectory generation.SFC-SCP combines the front-end convex polyhedron SFC construction and back-end SCP-based trajectory optimization.A Sparse A^(*)Search(SAS)driven SFC construction method is designed to efficiently generate polyhedron SFC according to the geometric relation among obstacles and collision-free waypoints.Via transforming the nonconvex obstacle-avoidance constraints to linear inequality constraints,SFC can mitigate infeasibility of trajectory planning and reduce computation complexity.Then,SCP casts the nonlinear trajectory optimization subject to SFC into convex programming subproblems to decrease the problem complexity.In addition,a convex optimizer based on interior point method is customized,where the search direction is calculated via successive elimination to further improve efficiency.Simulation experiments on dense obstacle scenarios show that SFC-SCP can generate dynamically feasible safe trajectory rapidly.Comparative studies with state-of-the-art SCP-based methods demonstrate the efficiency and reliability merits of SFC-SCP.Besides,the customized convex optimizer outperforms off-the-shelf optimizers in terms of computation time.
基金the National Key R&D Program of China(No.2023YFE0208700)National Natural Sci-ence Foundation of China(No.92163109 and 52072095)+7 种基金Shenzhen Science and Technology Program(No.RCJC20231211090000001,GXWD20231129101105001)the National Natural Science Foundation of China(No.52205590)the Natural Science Foundation of Jiangsu Province(No.BK20220834)the Start-up Research Fund of Southeast University(No.RF1028623098)the State Key Laboratory of Robotics and Systems(HIT)(No.SKLRS-2024-KF-11)National Natural Science Foundation of China(No.52202348)Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011491)Shenzhen Science and Technology Program(Nos.GXWD20220818224716001,KJZD20231023100302006).
文摘Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptability and safety.Various materials and actuation strategies have been developed for creating soft robots,among which,ferromagnetic soft materials that self-actuate in response to external magnetic fields have attracted worldwide attention due to their remote controllability and excellent compatibil-ity with biological tissues.This review presents comprehensive and systematic research advancements in the design,fabrication,and applications of ferromagnetic soft materials for miniature robots,providing in-sights into their potential use in biomedical fields and beyond.The programming strategies of ferromag-netic soft materials are summarized and classified,including mold-assisted programming,3D printing-assisted programming,microassembly-assisted programming,and magnetization reprogramming.Each approach possesses unique advantages in manipulating the magnetic responsiveness of ferromagnetic soft materials to achieve outstanding actuation and deformation performances.We then discuss the biomedi-cal applications of ferromagnetic soft material-based soft robots(e.g.,minimally invasive surgery,targeted delivery,and tissue engineering),highlighting their potentials in revolutionizing biomedical technologies.This review also points out the current challenges and provides insights into future research directions,which we hope can serve as a useful reference for the development of next-generation adaptive miniature robots.
基金NSERC Discovery under Grant 371627-2009 and NSERC RTI under Grant 374707-2009 EQPEQ programs
文摘A user-programmable computational/control platform was developed at the University of Toronto that offers real-time hybrid simulation （RTHS） capabilities. The platform was verified previously using several linear physical substructures. The study presented in this paper is focused on further validating the RTHS platform using a nonlinear viscoelastic-plastic damper that has displacement, frequency and temperature-dependent properties. The validation study includes damper component characterization tests, as well as RTHS of a series of single-degree-of-freedom （SDOF） systems equipped with viscoelastic-plastic dampers that represent different structural designs. From the component characterization tests, it was found that for a wide range of excitation frequencies and friction slip loads, the tracking errors are comparable to the errors in RTHS of linear spring systems. The hybrid SDOF results are compared to an independently validated thermal- mechanical viscoelastic model to further validate the ability for the platform to test nonlinear systems. After the validation, as an application study, nonlinear SDOF hybrid tests were used to develop performance spectra to predict the response of structures equipped with damping systems that are more challenging to model analytically. The use of the experimental performance spectra is illustrated by comparing the predicted response to the hybrid test response of 2DOF systems equipped with viscoelastic-plastic dampers.
基金supported in part by the National Key Research and Development Program of China(2024YFB4709100,2021YFE0206100)the National Natural Science Foundation of China(62073321)+1 种基金the National Defense Basic Scientific Research Program(JCKY2019203C029)the Science and Technology Development Fund,Macao SAR,China(0015/2020/AMJ)
文摘Learning-based methods have become mainstream for solving residential energy scheduling problems. In order to improve the learning efficiency of existing methods and increase the utilization of renewable energy, we propose the Dyna actiondependent heuristic dynamic programming(Dyna-ADHDP)method, which incorporates the ideas of learning and planning from the Dyna framework in action-dependent heuristic dynamic programming. This method defines a continuous action space for precise control of an energy storage system and allows online optimization of algorithm performance during the real-time operation of the residential energy model. Meanwhile, the target network is introduced during the training process to make the training smoother and more efficient. We conducted experimental comparisons with the benchmark method using simulated and real data to verify its applicability and performance. The results confirm the method's excellent performance and generalization capabilities, as well as its excellence in increasing renewable energy utilization and extending equipment life.
基金funded by the ICT Division of theMinistry of Posts,Telecommunications,and Information Technology of Bangladesh under Grant Number 56.00.0000.052.33.005.21-7(Tracking No.22FS15306)support from the University of Rajshahi.
文摘The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for healthcare systems,particularly for identifying actions critical to patient well-being.However,challenges such as high computational demands,low accuracy,and limited adaptability persist in Human Motion Recognition(HMR).While some studies have integrated HMR with IoT for real-time healthcare applications,limited research has focused on recognizing MRHA as essential for effective patient monitoring.This study proposes a novel HMR method tailored for MRHA detection,leveraging multi-stage deep learning techniques integrated with IoT.The approach employs EfficientNet to extract optimized spatial features from skeleton frame sequences using seven Mobile Inverted Bottleneck Convolutions(MBConv)blocks,followed by Convolutional Long Short Term Memory(ConvLSTM)to capture spatio-temporal patterns.A classification module with global average pooling,a fully connected layer,and a dropout layer generates the final predictions.The model is evaluated on the NTU RGB+D 120 and HMDB51 datasets,focusing on MRHA such as sneezing,falling,walking,sitting,etc.It achieves 94.85%accuracy for cross-subject evaluations and 96.45%for cross-view evaluations on NTU RGB+D 120,along with 89.22%accuracy on HMDB51.Additionally,the system integrates IoT capabilities using a Raspberry Pi and GSM module,delivering real-time alerts via Twilios SMS service to caregivers and patients.This scalable and efficient solution bridges the gap between HMR and IoT,advancing patient monitoring,improving healthcare outcomes,and reducing costs.
基金supported by the Start-up Fund from Hainan University(No.KYQD(ZR)-20077)。
文摘Three-dimensional(3D)single molecule localization microscopy(SMLM)plays an important role in biomedical applications,but its data processing is very complicated.Deep learning is a potential tool to solve this problem.As the state of art 3D super-resolution localization algorithm based on deep learning,FD-DeepLoc algorithm reported recently still has a gap with the expected goal of online image processing,even though it has greatly improved the data processing throughput.In this paper,a new algorithm Lite-FD-DeepLoc is developed on the basis of FD-DeepLoc algorithm to meet the online image processing requirements of 3D SMLM.This new algorithm uses the feature compression method to reduce the parameters of the model,and combines it with pipeline programming to accelerate the inference process of the deep learning model.The simulated data processing results show that the image processing speed of Lite-FD-DeepLoc is about twice as fast as that of FD-DeepLoc with a slight decrease in localization accuracy,which can realize real-time processing of 256×256 pixels size images.The results of biological experimental data processing imply that Lite-FD-DeepLoc can successfully analyze the data based on astigmatism and saddle point engineering,and the global resolution of the reconstructed image is equivalent to or even better than FD-DeepLoc algorithm.
