Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dua...Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.展开更多
Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements ...Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.展开更多
To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens...To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.展开更多
An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning appr...Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.展开更多
The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,th...The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.展开更多
We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers...We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.展开更多
Owing to its unique ability to capture volumetric tomographic information with a single light flash,optoacoustic(OA)tomography has recently demonstrated ultrafast imaging speeds ultimately limited by the ultrasound ti...Owing to its unique ability to capture volumetric tomographic information with a single light flash,optoacoustic(OA)tomography has recently demonstrated ultrafast imaging speeds ultimately limited by the ultrasound time-of-flight.The method's scalability and the achievable spatial resolution are yet limited by the narrow bandwidth of piezo-composite arrays currently employed for OA signal detection.Here we report on the first implementation of high-density spherical array technology based on flexible polyvinylidene difluoride films featuring ultrawideband(0.3-40 MHz)sub mm^(2)area elements,thus enabling real-time multi-scale volumetric imaging with 22-35μm spatial resolution,superior image fidelity and over an order of magnitude signal-to-noise enhancement compared to piezo-composite equivalents.We further demonstrate five-dimensional(spectroscopic,time-resolved,volumetric)imaging capabilities by visualizing fast stimulus-evoked cerebral oxygenation changes in mice and performing real-time functional angiography of deep human micro-vasculature.The new technology thus leverages the true potential of OA for quantitative high-resolution visualization of rapid bio-dynamics across scales.展开更多
The optimal plane for measurement of the right ventricular (RV) volumes by real-time three-dimensional echocardiography (RT3DE) was determined and the feasibility and accuracy of RT3DE in studying RV systolic function...The optimal plane for measurement of the right ventricular (RV) volumes by real-time three-dimensional echocardiography (RT3DE) was determined and the feasibility and accuracy of RT3DE in studying RV systolic function was assessed. RV “Full volume” images were acquired by RT3DE in 22 healthy subjects. RV end-diastolic volumes (RVEDV) and end-systolic volumes (RVESV) were outlined using apical biplane, 4-plane, 8-plane, 16-plane offline separately. RVSV and RVEF were calculated. Meanwhile tricuspid annual systolic excursion (TASE) was measured by M-mode echo. LVSV was outlined by 2-D echo according to the biplane Simpson's rule. The results showed: (1) There was a good correlation between RVSV measured from series planes and LVSV from 2-D echo (r=0.73; r=0.69; r=0.63; r=0.66, P<0.25—0.0025); (2) There were significant differences between RVEDV in biplane and those in 4-, 8-, 16-plane (P<0.001). There was also difference between RV volume in 4-plane and that in 8-plane (P<0.05), but there was no significant difference between RV volume in 8-plane and that in 16-plane (P>0.05); (3) Inter-observers and intro-observers variability analysis showed that there were close agreements and relations for RV volumes (r=0.986, P<0.001; r=0.93, P<0.001); (4) There was a significantly positive correlation of TASE to RVSV and RVEF from RT3DE (r=0.83; r=0.90). So RV volume measures with RT3DE are rapid, accurate and reproducible. In view of RV's complex shape, apical 8-plane method is better in clinical use. It may allow early detection of RV systolic function.展开更多
Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter...Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.展开更多
Voluntary participation of hemiplegic patients is crucial for functional electrical stimulation therapy.A wearable functional electrical stimulation system has been proposed for real-time volitional hand motor functio...Voluntary participation of hemiplegic patients is crucial for functional electrical stimulation therapy.A wearable functional electrical stimulation system has been proposed for real-time volitional hand motor function control using the electromyography bridge method.Through a series of novel design concepts,including the integration of a detecting circuit and an analog-to-digital converter,a miniaturized functional electrical stimulation circuit technique,a low-power super-regeneration chip for wireless receiving,and two wearable armbands,a prototype system has been established with reduced size,power,and overall cost.Based on wrist joint torque reproduction and classification experiments performed on six healthy subjects,the optimized surface electromyography thresholds and trained logistic regression classifier parameters were statistically chosen to establish wrist and hand motion control with high accuracy.Test results showed that wrist flexion/extension,hand grasp,and finger extension could be reproduced with high accuracy and low latency.This system can build a bridge of information transmission between healthy limbs and paralyzed limbs,effectively improve voluntary participation of hemiplegic patients,and elevate efficiency of rehabilitation training.展开更多
Objective To evaluate left atrial function in essential hypertension patients with different patterns of left ventricular geometric models by real-time three-dimensional echocardiography （RT-3DE） and left atrial tra...Objective To evaluate left atrial function in essential hypertension patients with different patterns of left ventricular geometric models by real-time three-dimensional echocardiography （RT-3DE） and left atrial tracking （EAT）.展开更多
The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for he...The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for healthcare systems,particularly for identifying actions critical to patient well-being.However,challenges such as high computational demands,low accuracy,and limited adaptability persist in Human Motion Recognition(HMR).While some studies have integrated HMR with IoT for real-time healthcare applications,limited research has focused on recognizing MRHA as essential for effective patient monitoring.This study proposes a novel HMR method tailored for MRHA detection,leveraging multi-stage deep learning techniques integrated with IoT.The approach employs EfficientNet to extract optimized spatial features from skeleton frame sequences using seven Mobile Inverted Bottleneck Convolutions(MBConv)blocks,followed by Convolutional Long Short Term Memory(ConvLSTM)to capture spatio-temporal patterns.A classification module with global average pooling,a fully connected layer,and a dropout layer generates the final predictions.The model is evaluated on the NTU RGB+D 120 and HMDB51 datasets,focusing on MRHA such as sneezing,falling,walking,sitting,etc.It achieves 94.85%accuracy for cross-subject evaluations and 96.45%for cross-view evaluations on NTU RGB+D 120,along with 89.22%accuracy on HMDB51.Additionally,the system integrates IoT capabilities using a Raspberry Pi and GSM module,delivering real-time alerts via Twilios SMS service to caregivers and patients.This scalable and efficient solution bridges the gap between HMR and IoT,advancing patient monitoring,improving healthcare outcomes,and reducing costs.展开更多
The dynamic characteristics of the area of the atrial septal defect（ASD） were evaluated using the technique of real-time three-dimensional echocardiography（RT 3DE）, the potential factors responsible for the dynami...The dynamic characteristics of the area of the atrial septal defect（ASD） were evaluated using the technique of real-time three-dimensional echocardiography（RT 3DE）, the potential factors responsible for the dynamic characteristics of the area of ASD were observed, and the overall and local volume and functions of the patients with ASD were measured. RT 3DE was performed on the 27 normal controls and 28 patients with ASD. Based on the three-dimensional data workstations, the area of ASD was measured at P wave vertex, R wave vertex, T wave starting point, and T wave terminal point and in the T-P section. The right atrial volume in the same time phase of the cardiac cycle and the motion displacement distance of the tricuspid annulus in the corresponding period were measured. The measured value of the area of ASD was analyzed. The changes in the right atrial volume and the motion displacement distance of the tricuspid annulus in the normal control group and the ASD group were compared. The right ventricular ejection fractions in the normal control group and the ASD group were compared using the RT 3DE long-axis eight-plane（LA 8-plane） method. Real-time three-dimensional volume imaging was performed in the normal control group and ASD group（n=30）. The right ventricular inflow tract, outflow tract, cardiac apex muscular trabecula dilatation, end-systolic volume, overall dilatation, end-systolic volume, and appropriate local and overall ejection fractions in both two groups were measured with the four-dimensional right ventricular quantitative analysis method（4D RVQ） and compared. The overall right ventricular volume and the ejection fraction measured by the LA 8-plane method and 4D RVQ were subjected to a related analysis. Dynamic changes occurred to the area of ASD in the cardiac cycle. The rules for dynamic changes in the area of ASD and the rules for changes in the right atrial volume in the cardiac cycle were consistent. The maximum value of the changes in the right atrial volume occurred in the end-systolic period when the peak of the curve appeared. The minimum value of the changes occurred in the end-systolic period and was located at the lowest point of the volume variation curve. The area variation curve for ASD and the motion variation curve for the tricuspid annulus in the cardiac cycle were the same. The displacement of the tricuspid annulus exhibited directionality. The measured values of the area of ASD at P wave vertex, R wave vertex, T wave starting point, T wave terminal point and in the T-P section were properly correlated with the right atrial volume（P〈0.001）. The area of ASD and the motion displacement distance of the tricuspid annulus were negatively correlated（P〈0.05）. The right atrial volumes in the ASD group in the cardiac cycle in various time phases increased significantly as compared with those in the normal control group（P=0.0001）. The motion displacement distance of the tricuspid annulus decreased significantly in the ASD group as compared with that in the normal control group（P=0.043）. The right ventricular ejection fraction in the ASD group was lower than that in the normal control group（P=0.032）. The ejection fraction of the cardiac apex trabecula of the ASD patients was significantly lower than the ejection fractions of the right ventricular outflow tract and inflow tract and overall ejection fraction. The difference was statistically significant（P=0.005）. The right ventricular local and overall dilatation and end-systolic volumes in the ASD group increased significantly as compared with those in the normal control group（P=0.031）. The a RVEF and the overall ejection fraction decreased in the ASD group as compared with those in the normal control group（P=0.0005）. The dynamic changes in the area of ASD and the motion curves for the right atrial volume and tricuspid annulus have the same dynamic characteristics. RT 3DE can be used to accurately evaluate the local and overall volume and functions of the right ventricle. The local and overall volume loads of the right ventricle in the ASD patients increase significantly as compared with those of the normal people. The right ventricular cardiac apex and the overall systolic function decrease.展开更多
Deep engineering disasters,such as rockbursts and collapses,are more related to the shear slip of rock joints.A novel multifunctional device was developed to study the shear failure mechanism in rocks.Using this devic...Deep engineering disasters,such as rockbursts and collapses,are more related to the shear slip of rock joints.A novel multifunctional device was developed to study the shear failure mechanism in rocks.Using this device,the complete shearedeformation process and long-term shear creep tests could be performed on rocks under constant normal stiffness(CNS)or constant normal loading(CNL)conditions in real-time at high temperature and true-triaxial stress.During the research and development process,five key technologies were successfully broken through:(1)the ability to perform true-triaxial compressioneshear loading tests on rock samples with high stiffness;(2)a shear box with ultra-low friction throughout the entire stress space of the rock sample during loading;(3)a control system capable of maintaining high stress for a long time and responding rapidly to the brittle fracture of a rock sample as well;(4)a refined ability to measure the volumetric deformation of rock samples subjected to true triaxial shearing;and(5)a heating system capable of maintaining uniform heating of the rock sample over a long time.By developing these technologies,loading under high true triaxial stress conditions was realized.The apparatus has a maximum normal stiffness of 1000 GPa/m and a maximum operating temperature of 300C.The differences in the surface temperature of the sample are constant to within5C.Five types of true triaxial shear tests were conducted on homogeneous sandstone to verify that the apparatus has good performance and reliability.The results show that temperature,lateral stress,normal stress and time influence the shear deformation,failure mode and strength of the sandstone.The novel apparatus can be reliably used to conduct true-triaxial shear tests on rocks subjected to high temperatures and stress.展开更多
Pharmacokinetic compartment models are the only models that can extract pharmacokinetic parameters from data collected in clinical studies but their estimates lack accuracy, explanations and physiological significance...Pharmacokinetic compartment models are the only models that can extract pharmacokinetic parameters from data collected in clinical studies but their estimates lack accuracy, explanations and physiological significance. The objective of this work was to develop particular solutions to drug concentration and AUC in the form of mathematical series and Heaviside functions for repetitive intermittent infusions in the one- and two-compartment models, as a function of dose number and total time using differential calculus. It was demonstrated that the central and peripheral compartment volumes determined from regression analysis of the aminoglycoside antibiotic Sisomicin concentration in plasma represent the actual physiological body fluid volumes accessible by the drug. The drug peak time and peak concentration in the peripheral compartment were also calculated as a function of dose number. It is also shown that the time of intercompartmental momentary distribution equilibrium can be used to determine the drug’s apparent volume of distribution within any dosing interval in multi-compartment models. These estimates were used to carry out simulations of plasma drug concentration with time in the one-compartment model. In conclusion, the two-compartment open mammillary pharmacokinetic model was fully explained for the aminoglycoside antibiotic sisomicin through the new concept of the apparent volume of distribution.展开更多
Along with process control,perception represents the main function performed by the Edge Layer of an Internet of Things(IoT)network.Many of these networks implement various applications where the response time does no...Along with process control,perception represents the main function performed by the Edge Layer of an Internet of Things(IoT)network.Many of these networks implement various applications where the response time does not represent an important parameter.However,in critical applications,this parameter represents a crucial aspect.One important sensing device used in IoT designs is the accelerometer.In most applications,the response time of the embedded driver software handling this device is generally not analysed and not taken into account.In this paper,we present the design and implementation of a predictable real-time driver stack for a popular accelerometer and gyroscope device family.We provide clear justifications for why this response time is extremely important for critical applications in the acquisition process of such data.We present extensive measurements and experimental results that demonstrate the predictability of our solution,making it suitable for critical real-time systems.展开更多
Focal ischemia due to reduction of cerebral blood flow(CBF),creates 2 zones of damage:the core area,which suffers severe damage,and penumbra area,which surrounds the core and suffers intermediate levels of injury.Obje...Focal ischemia due to reduction of cerebral blood flow(CBF),creates 2 zones of damage:the core area,which suffers severe damage,and penumbra area,which surrounds the core and suffers intermediate levels of injury.Objectives:A novel method is introduced,which evaluates mitochondrial function in the core and in the penumbra,during focal cerebral ischemia.Methods:Wistar rats underwent focal cerebral ischemia by middle cerebral artery occlusion(MCAO)for 60 minutes,followed by 60 minutes of reperfusion.Mitochondrial function was assessed by a unique Multi-Site—Multi-Parametric(MSMP)monitoring system,which measures mitochondrial NADH using fluorometric technique,and CBF using Laser Doppler Flowmetry(LDF).Results:At the onset of occlusion,CBF dropped and NADH increased significantly only in the right hemisphere.CBF levels were significantly lower and NADH significantly higher in the core than in the penumbra.After reperfusion,CBF and NADH recovered correspondingly to the intensity of ischemia.Conclusion:Application of the MSMP system can add significant information for the understanding of the cerebral metabolic state under ischemic conditions,with an emphasis on mitochondrial function.展开更多
The volume-time curve change in patients with normal left ventricular （LV） diastolic function and diastolic dysfunction was evaluated by real-time three-dimensional echocardiography （RT3DE）. LV diastolic dysfuncti...The volume-time curve change in patients with normal left ventricular （LV） diastolic function and diastolic dysfunction was evaluated by real-time three-dimensional echocardiography （RT3DE）. LV diastolic dysfunction was defined by E＇〈A＇ in pulse-wave tissue Doppler for inter-ventricular septal （IVS） of mitral annulus. In 24 patients with LV diastolic dysfunction, including 12 patients with delayed relaxation （delayed relaxation group） and 12 patients with pseudo-normal function （pseudo-normal group） and 24 normal volunteers （control group）, data of full-volume image were acquired by real-time three-dimensional echocardiography and subjected to volume-time curve analysis. EDV （end-diastolic volume）, ESV （end-systolic volume）, LVEF （left ventricular ejection fraction）, PER （peak ejection rate）, PFR （peak filling rate） from RT3DE were examined in the three groups. Compared to the control group, PFR （diastolic filling index of RT3DE） was significantly reduced in the delayed relaxation group and pseudo-normal group （P〈0.05）. There were no significant differences in EDV, ESV, LVEE PER （P〉0.05）. It is concluded that PFR, as a diastolic filling index of RT3DE, can reflect the early diastolic function and serve as a new non-invasive, quick and accurate tool for clinical assessment of LV diastolic function.展开更多
基金supported by the National Institute of Health(R37CA240806,U01CA288351,and R50CA283816)support from UCI Chao Family Comprehensive Cancer Center(P30CA062203).
文摘Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.
基金the support of the Major Science and Technology Project of Yunnan Province,China(Grant No.202502AD080007)the National Natural Science Foundation of China(Grant No.52378288)。
文摘Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.
基金supported by the National Natural Science Foundation of China(Grant No.42077244)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0434).
文摘To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
文摘Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.
基金supported by the National Natural Science Foundation of China(Grant No.62403486)。
文摘The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.
基金funded by Scientific Research Deanship at University of Ha’il-Saudi Arabia through project number(RG-24014).
文摘We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.
基金supported by the Swiss National Science Foundation(310030_192757)the European Research Council(ERC-2015-CoG-682379)+2 种基金The development of the ultra-wideband ultrasonic antenna and the in vivo optoacoustic experiments were supported by the grants from the Russian Science Foundation(18-45-06006)the Helmholtz Association(HRSF-0020)The development of numerical algorithms for enhancement of angiographic optoacoustic images was partially supported by the grant from the Russian Science Foundation(19-75-10055)。
文摘Owing to its unique ability to capture volumetric tomographic information with a single light flash,optoacoustic(OA)tomography has recently demonstrated ultrafast imaging speeds ultimately limited by the ultrasound time-of-flight.The method's scalability and the achievable spatial resolution are yet limited by the narrow bandwidth of piezo-composite arrays currently employed for OA signal detection.Here we report on the first implementation of high-density spherical array technology based on flexible polyvinylidene difluoride films featuring ultrawideband(0.3-40 MHz)sub mm^(2)area elements,thus enabling real-time multi-scale volumetric imaging with 22-35μm spatial resolution,superior image fidelity and over an order of magnitude signal-to-noise enhancement compared to piezo-composite equivalents.We further demonstrate five-dimensional(spectroscopic,time-resolved,volumetric)imaging capabilities by visualizing fast stimulus-evoked cerebral oxygenation changes in mice and performing real-time functional angiography of deep human micro-vasculature.The new technology thus leverages the true potential of OA for quantitative high-resolution visualization of rapid bio-dynamics across scales.
文摘The optimal plane for measurement of the right ventricular (RV) volumes by real-time three-dimensional echocardiography (RT3DE) was determined and the feasibility and accuracy of RT3DE in studying RV systolic function was assessed. RV “Full volume” images were acquired by RT3DE in 22 healthy subjects. RV end-diastolic volumes (RVEDV) and end-systolic volumes (RVESV) were outlined using apical biplane, 4-plane, 8-plane, 16-plane offline separately. RVSV and RVEF were calculated. Meanwhile tricuspid annual systolic excursion (TASE) was measured by M-mode echo. LVSV was outlined by 2-D echo according to the biplane Simpson's rule. The results showed: (1) There was a good correlation between RVSV measured from series planes and LVSV from 2-D echo (r=0.73; r=0.69; r=0.63; r=0.66, P<0.25—0.0025); (2) There were significant differences between RVEDV in biplane and those in 4-, 8-, 16-plane (P<0.001). There was also difference between RV volume in 4-plane and that in 8-plane (P<0.05), but there was no significant difference between RV volume in 8-plane and that in 16-plane (P>0.05); (3) Inter-observers and intro-observers variability analysis showed that there were close agreements and relations for RV volumes (r=0.986, P<0.001; r=0.93, P<0.001); (4) There was a significantly positive correlation of TASE to RVSV and RVEF from RT3DE (r=0.83; r=0.90). So RV volume measures with RT3DE are rapid, accurate and reproducible. In view of RV's complex shape, apical 8-plane method is better in clinical use. It may allow early detection of RV systolic function.
文摘Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.
基金supported by the National Natural Science Foundation of China,No.90307013,90707005,61534003the Science&Technology Pillar Program of Jiangsu Province in China,No.BE2013706
文摘Voluntary participation of hemiplegic patients is crucial for functional electrical stimulation therapy.A wearable functional electrical stimulation system has been proposed for real-time volitional hand motor function control using the electromyography bridge method.Through a series of novel design concepts,including the integration of a detecting circuit and an analog-to-digital converter,a miniaturized functional electrical stimulation circuit technique,a low-power super-regeneration chip for wireless receiving,and two wearable armbands,a prototype system has been established with reduced size,power,and overall cost.Based on wrist joint torque reproduction and classification experiments performed on six healthy subjects,the optimized surface electromyography thresholds and trained logistic regression classifier parameters were statistically chosen to establish wrist and hand motion control with high accuracy.Test results showed that wrist flexion/extension,hand grasp,and finger extension could be reproduced with high accuracy and low latency.This system can build a bridge of information transmission between healthy limbs and paralyzed limbs,effectively improve voluntary participation of hemiplegic patients,and elevate efficiency of rehabilitation training.
基金Supported by the Natural Science Foundation of Liaoning ProvinceChina(2013023010)
文摘Objective To evaluate left atrial function in essential hypertension patients with different patterns of left ventricular geometric models by real-time three-dimensional echocardiography （RT-3DE） and left atrial tracking （EAT）.
基金funded by the ICT Division of theMinistry of Posts,Telecommunications,and Information Technology of Bangladesh under Grant Number 56.00.0000.052.33.005.21-7(Tracking No.22FS15306)support from the University of Rajshahi.
文摘The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for healthcare systems,particularly for identifying actions critical to patient well-being.However,challenges such as high computational demands,low accuracy,and limited adaptability persist in Human Motion Recognition(HMR).While some studies have integrated HMR with IoT for real-time healthcare applications,limited research has focused on recognizing MRHA as essential for effective patient monitoring.This study proposes a novel HMR method tailored for MRHA detection,leveraging multi-stage deep learning techniques integrated with IoT.The approach employs EfficientNet to extract optimized spatial features from skeleton frame sequences using seven Mobile Inverted Bottleneck Convolutions(MBConv)blocks,followed by Convolutional Long Short Term Memory(ConvLSTM)to capture spatio-temporal patterns.A classification module with global average pooling,a fully connected layer,and a dropout layer generates the final predictions.The model is evaluated on the NTU RGB+D 120 and HMDB51 datasets,focusing on MRHA such as sneezing,falling,walking,sitting,etc.It achieves 94.85%accuracy for cross-subject evaluations and 96.45%for cross-view evaluations on NTU RGB+D 120,along with 89.22%accuracy on HMDB51.Additionally,the system integrates IoT capabilities using a Raspberry Pi and GSM module,delivering real-time alerts via Twilios SMS service to caregivers and patients.This scalable and efficient solution bridges the gap between HMR and IoT,advancing patient monitoring,improving healthcare outcomes,and reducing costs.
文摘The dynamic characteristics of the area of the atrial septal defect（ASD） were evaluated using the technique of real-time three-dimensional echocardiography（RT 3DE）, the potential factors responsible for the dynamic characteristics of the area of ASD were observed, and the overall and local volume and functions of the patients with ASD were measured. RT 3DE was performed on the 27 normal controls and 28 patients with ASD. Based on the three-dimensional data workstations, the area of ASD was measured at P wave vertex, R wave vertex, T wave starting point, and T wave terminal point and in the T-P section. The right atrial volume in the same time phase of the cardiac cycle and the motion displacement distance of the tricuspid annulus in the corresponding period were measured. The measured value of the area of ASD was analyzed. The changes in the right atrial volume and the motion displacement distance of the tricuspid annulus in the normal control group and the ASD group were compared. The right ventricular ejection fractions in the normal control group and the ASD group were compared using the RT 3DE long-axis eight-plane（LA 8-plane） method. Real-time three-dimensional volume imaging was performed in the normal control group and ASD group（n=30）. The right ventricular inflow tract, outflow tract, cardiac apex muscular trabecula dilatation, end-systolic volume, overall dilatation, end-systolic volume, and appropriate local and overall ejection fractions in both two groups were measured with the four-dimensional right ventricular quantitative analysis method（4D RVQ） and compared. The overall right ventricular volume and the ejection fraction measured by the LA 8-plane method and 4D RVQ were subjected to a related analysis. Dynamic changes occurred to the area of ASD in the cardiac cycle. The rules for dynamic changes in the area of ASD and the rules for changes in the right atrial volume in the cardiac cycle were consistent. The maximum value of the changes in the right atrial volume occurred in the end-systolic period when the peak of the curve appeared. The minimum value of the changes occurred in the end-systolic period and was located at the lowest point of the volume variation curve. The area variation curve for ASD and the motion variation curve for the tricuspid annulus in the cardiac cycle were the same. The displacement of the tricuspid annulus exhibited directionality. The measured values of the area of ASD at P wave vertex, R wave vertex, T wave starting point, T wave terminal point and in the T-P section were properly correlated with the right atrial volume（P〈0.001）. The area of ASD and the motion displacement distance of the tricuspid annulus were negatively correlated（P〈0.05）. The right atrial volumes in the ASD group in the cardiac cycle in various time phases increased significantly as compared with those in the normal control group（P=0.0001）. The motion displacement distance of the tricuspid annulus decreased significantly in the ASD group as compared with that in the normal control group（P=0.043）. The right ventricular ejection fraction in the ASD group was lower than that in the normal control group（P=0.032）. The ejection fraction of the cardiac apex trabecula of the ASD patients was significantly lower than the ejection fractions of the right ventricular outflow tract and inflow tract and overall ejection fraction. The difference was statistically significant（P=0.005）. The right ventricular local and overall dilatation and end-systolic volumes in the ASD group increased significantly as compared with those in the normal control group（P=0.031）. The a RVEF and the overall ejection fraction decreased in the ASD group as compared with those in the normal control group（P=0.0005）. The dynamic changes in the area of ASD and the motion curves for the right atrial volume and tricuspid annulus have the same dynamic characteristics. RT 3DE can be used to accurately evaluate the local and overall volume and functions of the right ventricle. The local and overall volume loads of the right ventricle in the ASD patients increase significantly as compared with those of the normal people. The right ventricular cardiac apex and the overall systolic function decrease.
基金financial support from the National Natural Science Foundation of China(Grant Nos.52209125 and 51839003).
文摘Deep engineering disasters,such as rockbursts and collapses,are more related to the shear slip of rock joints.A novel multifunctional device was developed to study the shear failure mechanism in rocks.Using this device,the complete shearedeformation process and long-term shear creep tests could be performed on rocks under constant normal stiffness(CNS)or constant normal loading(CNL)conditions in real-time at high temperature and true-triaxial stress.During the research and development process,five key technologies were successfully broken through:(1)the ability to perform true-triaxial compressioneshear loading tests on rock samples with high stiffness;(2)a shear box with ultra-low friction throughout the entire stress space of the rock sample during loading;(3)a control system capable of maintaining high stress for a long time and responding rapidly to the brittle fracture of a rock sample as well;(4)a refined ability to measure the volumetric deformation of rock samples subjected to true triaxial shearing;and(5)a heating system capable of maintaining uniform heating of the rock sample over a long time.By developing these technologies,loading under high true triaxial stress conditions was realized.The apparatus has a maximum normal stiffness of 1000 GPa/m and a maximum operating temperature of 300C.The differences in the surface temperature of the sample are constant to within5C.Five types of true triaxial shear tests were conducted on homogeneous sandstone to verify that the apparatus has good performance and reliability.The results show that temperature,lateral stress,normal stress and time influence the shear deformation,failure mode and strength of the sandstone.The novel apparatus can be reliably used to conduct true-triaxial shear tests on rocks subjected to high temperatures and stress.
文摘Pharmacokinetic compartment models are the only models that can extract pharmacokinetic parameters from data collected in clinical studies but their estimates lack accuracy, explanations and physiological significance. The objective of this work was to develop particular solutions to drug concentration and AUC in the form of mathematical series and Heaviside functions for repetitive intermittent infusions in the one- and two-compartment models, as a function of dose number and total time using differential calculus. It was demonstrated that the central and peripheral compartment volumes determined from regression analysis of the aminoglycoside antibiotic Sisomicin concentration in plasma represent the actual physiological body fluid volumes accessible by the drug. The drug peak time and peak concentration in the peripheral compartment were also calculated as a function of dose number. It is also shown that the time of intercompartmental momentary distribution equilibrium can be used to determine the drug’s apparent volume of distribution within any dosing interval in multi-compartment models. These estimates were used to carry out simulations of plasma drug concentration with time in the one-compartment model. In conclusion, the two-compartment open mammillary pharmacokinetic model was fully explained for the aminoglycoside antibiotic sisomicin through the new concept of the apparent volume of distribution.
文摘Along with process control,perception represents the main function performed by the Edge Layer of an Internet of Things(IoT)network.Many of these networks implement various applications where the response time does not represent an important parameter.However,in critical applications,this parameter represents a crucial aspect.One important sensing device used in IoT designs is the accelerometer.In most applications,the response time of the embedded driver software handling this device is generally not analysed and not taken into account.In this paper,we present the design and implementation of a predictable real-time driver stack for a popular accelerometer and gyroscope device family.We provide clear justifications for why this response time is extremely important for critical applications in the acquisition process of such data.We present extensive measurements and experimental results that demonstrate the predictability of our solution,making it suitable for critical real-time systems.
文摘Focal ischemia due to reduction of cerebral blood flow(CBF),creates 2 zones of damage:the core area,which suffers severe damage,and penumbra area,which surrounds the core and suffers intermediate levels of injury.Objectives:A novel method is introduced,which evaluates mitochondrial function in the core and in the penumbra,during focal cerebral ischemia.Methods:Wistar rats underwent focal cerebral ischemia by middle cerebral artery occlusion(MCAO)for 60 minutes,followed by 60 minutes of reperfusion.Mitochondrial function was assessed by a unique Multi-Site—Multi-Parametric(MSMP)monitoring system,which measures mitochondrial NADH using fluorometric technique,and CBF using Laser Doppler Flowmetry(LDF).Results:At the onset of occlusion,CBF dropped and NADH increased significantly only in the right hemisphere.CBF levels were significantly lower and NADH significantly higher in the core than in the penumbra.After reperfusion,CBF and NADH recovered correspondingly to the intensity of ischemia.Conclusion:Application of the MSMP system can add significant information for the understanding of the cerebral metabolic state under ischemic conditions,with an emphasis on mitochondrial function.
基金This project was supported by a grant from Guangdong Provincial Natural Sciences Foundation (No 05300738)
文摘The volume-time curve change in patients with normal left ventricular （LV） diastolic function and diastolic dysfunction was evaluated by real-time three-dimensional echocardiography （RT3DE）. LV diastolic dysfunction was defined by E＇〈A＇ in pulse-wave tissue Doppler for inter-ventricular septal （IVS） of mitral annulus. In 24 patients with LV diastolic dysfunction, including 12 patients with delayed relaxation （delayed relaxation group） and 12 patients with pseudo-normal function （pseudo-normal group） and 24 normal volunteers （control group）, data of full-volume image were acquired by real-time three-dimensional echocardiography and subjected to volume-time curve analysis. EDV （end-diastolic volume）, ESV （end-systolic volume）, LVEF （left ventricular ejection fraction）, PER （peak ejection rate）, PFR （peak filling rate） from RT3DE were examined in the three groups. Compared to the control group, PFR （diastolic filling index of RT3DE） was significantly reduced in the delayed relaxation group and pseudo-normal group （P〈0.05）. There were no significant differences in EDV, ESV, LVEE PER （P〉0.05）. It is concluded that PFR, as a diastolic filling index of RT3DE, can reflect the early diastolic function and serve as a new non-invasive, quick and accurate tool for clinical assessment of LV diastolic function.
