The optimization of reaction processes is crucial for the green, efficient, and sustainable development of the chemical industry. However, how to address the problems posed by multiple variables, nonlinearities, and u...The optimization of reaction processes is crucial for the green, efficient, and sustainable development of the chemical industry. However, how to address the problems posed by multiple variables, nonlinearities, and uncertainties during optimization remains a formidable challenge. In this study, a strategy combining interpretable machine learning with metaheuristic optimization algorithms is employed to optimize the reaction process. First, experimental data from a biodiesel production process are collected to establish a database. These data are then used to construct a predictive model based on artificial neural network (ANN) models. Subsequently, interpretable machine learning techniques are applied for quantitative analysis and verification of the model. Finally, four metaheuristic optimization algorithms are coupled with the ANN model to achieve the desired optimization. The research results show that the methanol: palm fatty acid distillate (PFAD) molar ratio contributes the most to the reaction outcome, accounting for 41%. The ANN-simulated annealing (SA) hybrid method is more suitable for this optimization, and the optimal process parameters are a catalyst concentration of 3.00% (mass), a methanol: PFAD molar ratio of 8.67, and a reaction time of 30 min. This study provides deeper insights into reaction process optimization, which will facilitate future applications in various reaction optimization processes.展开更多
M, a particular industrial waste, was selected to detoxify chromium slag at a high temperature. The carbon remaining in M reduced Cr （ Ⅳ ） of Na2 CrO4 borne in the chromium slag to Cr （ Ⅲ ） in the solid phase re...M, a particular industrial waste, was selected to detoxify chromium slag at a high temperature. The carbon remaining in M reduced Cr （ Ⅳ ） of Na2 CrO4 borne in the chromium slag to Cr （ Ⅲ ） in the solid phase reaction, and its thermodynamics and kinetics were studied. The reduction process of Na2CrO4 by carbon produced CO, whiCh＇was endothermic. Under the experimental condition, the apparent activation energy was 4. 41 kJ·mol^-1 , the＇apparent order of reaction for Na2 CrO4 was equal to one, and the partial pressure of CO was only 0.22 Pa at 1 330℃.展开更多
Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chem...Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chemical desorption instead of thermal desorption on 1,8-diazabicyclo[5.4.0]undec-7-ene(DBU)aqueous solution after CO2 absorption.The X-ray diffraction(XRD)patterns of solid products show the formation of calcite calcium carbonate(CaCO3),which prove the feasibility of this method.The effects of reaction temperature,reaction time and Ca2+/CO32-molar ratios on the related reactions in CO2 absorption-mineralization process and CaCO3 precipitation are discussed,and purer CaCO3 is obtained by ultrasonic treatment.The CaCO3 content can be increased to 95.8%and the CO2 desorption ratio can achieve 80%by 30 min ultrasonic dispersion treatment under the conditions(40℃,180 min,Ca2+/CO32-molar ratio=1.0).After five cycles,DBU aqueous solution shows stable CO2 absorption and mineralization ability.Fourier transform infrared spectroscopy(FT-IR)spectra of the reaction process also indicate the regeneration of the solvent.Compared with thermal desorption,this process is exothermic,almost without no additional heat.展开更多
The influence of Cu content on the reaction process, reaction behavior and obtained products in the Cu-ZrC system, as well as their relationships, were investigated. The results showed that Zr C was synthesized throug...The influence of Cu content on the reaction process, reaction behavior and obtained products in the Cu-ZrC system, as well as their relationships, were investigated. The results showed that Zr C was synthesized through the diffusion and dissolution of C into a Cu-Zr liquid. Increasing the Cu content enhanced the amount of Cu-Zr liquid formed at the early stage but decreased the amount of C atoms dissolving into the melt at unit time. Consequently, the ignition time initially decreased and then increased. Conversely, with an increased Cu content, the energy required for igniting the neighboring unreacted powders increased,while the heat released by the reaction and the dwell time of the compact at high temperatures decreased.These effects then resulted in the reduction of combustion wave velocity, combustion temperature and Zr C particle size. Furthermore, the synthesis of ZrC is a multistage process, which provides a nonuniform distributed Zr C particle size. The sub-μm Zr C particle reinforced Cu matrix composite was fabricated by adding a ZrC-Cu master alloy prepared through a self-propagating high-temperature synthesis reaction into liquid Cu.展开更多
Identifying chemical reaction processes is essential for exploring the mechanism and optimizing the reaction.In situ spectroscopy can provide real-time information on molecules during chemical reactions to help reveal...Identifying chemical reaction processes is essential for exploring the mechanism and optimizing the reaction.In situ spectroscopy can provide real-time information on molecules during chemical reactions to help reveal the reaction mechanism and dynamics.However,it is time-consuming and laborious to observe and decipher the spectra manually,and it is difficult for humans to capture the subtle differences between spectra,which makes it difficult to do quantitative analysis.The noise of the reaction systems also poses a greater challenge.Herein,we employed a combination of machine learning(ML)and spectroscopic techniques to establish a correlation between spectroscopic data and the processes of the carbon dioxide reduction reaction.By intelligently resolving the vibrational spectral signals,we can accurately identify the individual steps of the reaction.With a small amount of additional data,the approach is not only applicable to different systems,but also maintains good performance in noisy environments.Furthermore,we establish the spectrastructure quantitative relationship to obtain more refined reaction coordinates.Identifying chemical reaction processes using such an ML framework lays the foundation for unraveling the black box of chemical reactions between reactants and products,and provides a new strategy for understanding and optimizing chemical reactions.展开更多
β-Sialon/ZrN bonded corundum composites were synthesized using fused white corundum,alumina micro powder,zircon and carbon black by nitridation reaction sintering process. Phase composition and microstructure of the ...β-Sialon/ZrN bonded corundum composites were synthesized using fused white corundum,alumina micro powder,zircon and carbon black by nitridation reaction sintering process. Phase composition and microstructure of the synthesized composites were investigated by X-ray powder diffraction and scanning electronic microscope,and the formation process of the composites was discussed. The results show that the composites with different compositions can be obtained by controlling the heating temperature and contents of zircon and carbon black. The proper temperature to synthesize the composites is 1773 K.展开更多
The Mg_(2)Si-matrix thermoelectric material was synthesized by low temperature solid-state reaction.This paper studies the effects of holding time and reaction temperature on the particle size and the properties of th...The Mg_(2)Si-matrix thermoelectric material was synthesized by low temperature solid-state reaction.This paper studies the effects of holding time and reaction temperature on the particle size and the properties of the material,and also studies effects of doping elemental Sb,Te and their doping seqence on the properties of the material.The result shows that excessively high temperature and elongated holding time of solid-state reaction are harmful,there is a range of particle size to ensure optimum properties and the doping sequence of Sb or Te without influencing the properties.展开更多
The effect of pan-milling on morphological structure,processability and properties of PVC was studied throughSEM,FTIR,granulometer,GPC and mechanical properties test in the hope of gaining ease in operation,needless o...The effect of pan-milling on morphological structure,processability and properties of PVC was studied throughSEM,FTIR,granulometer,GPC and mechanical properties test in the hope of gaining ease in operation,needless ofplasticizers,a clean and efficient route for improving the processability of PVC through stress-induced reactions,fulfilling the idea of“plasticizing PVC by itself”.The experimental results show that during pan-milling at ambienttemperature,within 2-3 min,the microcrystalline structure of PVC becomes indistinct,the grain size of PVC is reducedfrom 130-160 μm to 1-50 μm the molecular weight of PVC is slightly decreased,the variation of molecular weightdistribution is indistinct,the plasticizing time and torque at balance drop a great deal from 71-132 s to 31-33 s and from18.2-22.1 Nm to 14.7-18.4 Nm,respectively,the processability of PVC is markedly improved,and the mechanicalproperties get enhanced too.展开更多
The oxide-zeolite process provides a promising way for one-step production of aromatics from syngas,whereas the reasons for the dramatic effect of intimacy between oxide and zeolite in the composite catalyst on the pr...The oxide-zeolite process provides a promising way for one-step production of aromatics from syngas,whereas the reasons for the dramatic effect of intimacy between oxide and zeolite in the composite catalyst on the product selectivity are still unclear. In order to explore the optimal intimacy and the essential influence factors, ZnCrOxcombined with ZSM-5 are employed to prepare the composite catalysts with different distances between the two components by changing the mixing methods. An aromatic selectivity of 74%(with CO conversion to be 16%) is achieved by the composite catalyst when the intimacy is in the range of nanometer. A so-called ‘iterative reactions’ mechanism of intermediates over oxides is then proposed and studied: the intermediate chemical can undergo a hydrogenation reaction on oxide.So the shorter the intermediates stay on oxide, the more of chance for C-C coupling takes place on zeolite to form aromatics. Moreover, the aero-environments of reaction is found to impact on the extent of iterative reaction as well. Therefore, when the intimacy between the two components changes, the extent of iterative reactions vary, resulting in alteration of product distribution. This work provides new insight in understanding the mechanisms during the complex process of OX-ZEO composite catalysis and sheds light to the design of a high-yield catalyst for synthetization of aromatics from syngas.展开更多
A novel technique combining electrophoretic deposition (EPD) and reaction bonding process (RBP) is developed to fabricate thick ZrO2/Al2O3 composite coatings. Mixed organic solvents are used here to make suspension co...A novel technique combining electrophoretic deposition (EPD) and reaction bonding process (RBP) is developed to fabricate thick ZrO2/Al2O3 composite coatings. Mixed organic solvents are used here to make suspension containing yttria stablised zirconia (YSZ) and aluminium (Al). The results show that densely packed green form coatings are deposited using a mixture of ethanol and acetylacetone as suspension medium and ball milling for 48 hours. On subsequent heat treatment, melting and oxidation of aluminium in the green forms promote densification during sintering. By these means, thick, uniform and crack-free ZrtVA^Oa composite coatings have been fabricated on metal substrate.展开更多
The experiment was carried out in a combined blowing converter.The natural gas was supplied as the cooling medium for the bottom lance.The blow- ing practice of medium P hot metal (0.30-0.85% [P]) indicated that with ...The experiment was carried out in a combined blowing converter.The natural gas was supplied as the cooling medium for the bottom lance.The blow- ing practice of medium P hot metal (0.30-0.85% [P]) indicated that with better stirring at the bottom of the converter and lower P_(CO),this steelmgking process was favorable to reduce the amount of [C] and [O] and increase the (P_2O_5)/[P]. The maximum rate of dephospborization might be high up to 0.0a5%/min and the P content in steel could be reduced to lower than 0.03% by single slag-forming operation.展开更多
The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions f...The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.展开更多
In situ Al2O3 whiskers reinforced Ti-Al intermetallic composites were fabricated at ~1200℃ by reaction sintering of cold-consolidated fillets consisting mainly of Ti, Al, and different additives. The phases and micro...In situ Al2O3 whiskers reinforced Ti-Al intermetallic composites were fabricated at ~1200℃ by reaction sintering of cold-consolidated fillets consisting mainly of Ti, Al, and different additives. The phases and microstructures of the sintered composites were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS). The process of synthesis was investigated using differential thermal analysis (DTA). The effects of processing parameters and additives on the microstructures of the composites and the development of whisker were examined. It is found that the morphology of the whisker is strongly influenced by the additives, the exothermal reaction process, and the processing parameters.展开更多
The reaction kinetics of roasting zinc silicate using NaOH was investigated.The orthogonal test was employed to optimize the reaction conditions and the optimized reaction conditions were as follows:molar ratio of NaO...The reaction kinetics of roasting zinc silicate using NaOH was investigated.The orthogonal test was employed to optimize the reaction conditions and the optimized reaction conditions were as follows:molar ratio of NaOH to Zn2SiO4 of 16:1,reaction temperature of 550°C,and reaction time of 2.5 h.In order to ascertain the phases transformation and reaction processes of zinc oxide and silica,the XRD phase analysis was used to analyze the phases of these specimens roasted at different temperatures.The final phases of the specimen roasted at 600°C were Na2ZnO2,Na4SiO4,Na2ZnSiO4 and NaOH.The reaction kinetic equation of roasting was determined by the shrinking unreacted core model.Aiming to investigate the reaction mechanism,two control models of reaction rate were applied:chemical reaction at the particle surface and diffusion through the product layer.The results indicated that the diffusion through the product layer model described the reaction process well.The apparent activation energy of the roasting was 19.77 kJ/mol.展开更多
A new material with heat-resistant and adiabatic characteristics and high strength was prepared using the combustion synthesis method by mixed powders of CrO3, Al, Al2O3, and NaF in atmospheric gas. The reaction dynam...A new material with heat-resistant and adiabatic characteristics and high strength was prepared using the combustion synthesis method by mixed powders of CrO3, Al, Al2O3, and NaF in atmospheric gas. The reaction dynamic process of the Al-CrO3-NaF-Al2O3-N2-O2 new material system by the combustion synthesis method was discussed based on the observation results by SEM, EDS, and XRD in combination with the combustion front quenching method （CFQM） and the relation curves between reaction free enthalpies and the corresponding temperatures. The combustion synthesis mechanism and the formation reasons of the phase in the combustion product were analyzed.展开更多
In this study, a powder mixture with an Al/TiO2 molar ratio of 10/3 was used to form an r-Al2Ti intermetallic matrix composite （IMC） reinforced with α-Al2O3 ceramic by a novel milling technique, called discontinuou...In this study, a powder mixture with an Al/TiO2 molar ratio of 10/3 was used to form an r-Al2Ti intermetallic matrix composite （IMC） reinforced with α-Al2O3 ceramic by a novel milling technique, called discontinuous mechanical milling （DMM） instead of milling and ignition of the produced thermite. The results of energy dispersive X-ray spectroscopy （EDX） and X-ray diffraction （XRD） of samples with varying milling time indicate that this fabrication process requires considerable mechanical energy. It is shown that Al2Ti-α-Al2O3 IMC with small grain size was produced by DMM after 15 h of ball milling. Peaks for γ-TLA1 as well as Al2Ti and Al2O3 are observed in XRD patterns after DMM followed by heat treatment. The microhardness of the DMM-treated composite produced after heat treatment was higher than Hv 700.展开更多
Charge separation and transformation are some of the key requirements for high-efficiency photocatalysis. The photocatalytic reaction mechanism provides a guideline for the development and commercialization of high-ef...Charge separation and transformation are some of the key requirements for high-efficiency photocatalysis. The photocatalytic reaction mechanism provides a guideline for the development and commercialization of high-efficiency photocatalysts. In this study, we designed and favorably synthesized BMO@BOC heterojunctions via a facile solvothermal route and applied the heat treatment method for application in high-efficiency photocatalytic NO removal. More importantly, both continuous stream and intermittent stream methods with in situ diffuse reflectance infrared Fourier transform spectroscopy were applied to intuitively and dynamically investigate the adsorption process and oxidation process of NO removal over the photocatalyst surface. The intermediate products(NO-, NO2-, and NO2) were explicitly detected in both the adsorption process and oxidation process, whilst the final product(NO3-) appeared only in the oxidation process, owing to the separation, migration, and conversion of photoinduced electron-hole pairs.展开更多
基金supported by the National Natural Science Foundation of China(22408227,22238005)the Postdoctoral Research Foundation of China(GZC20231576).
文摘The optimization of reaction processes is crucial for the green, efficient, and sustainable development of the chemical industry. However, how to address the problems posed by multiple variables, nonlinearities, and uncertainties during optimization remains a formidable challenge. In this study, a strategy combining interpretable machine learning with metaheuristic optimization algorithms is employed to optimize the reaction process. First, experimental data from a biodiesel production process are collected to establish a database. These data are then used to construct a predictive model based on artificial neural network (ANN) models. Subsequently, interpretable machine learning techniques are applied for quantitative analysis and verification of the model. Finally, four metaheuristic optimization algorithms are coupled with the ANN model to achieve the desired optimization. The research results show that the methanol: palm fatty acid distillate (PFAD) molar ratio contributes the most to the reaction outcome, accounting for 41%. The ANN-simulated annealing (SA) hybrid method is more suitable for this optimization, and the optimal process parameters are a catalyst concentration of 3.00% (mass), a methanol: PFAD molar ratio of 8.67, and a reaction time of 30 min. This study provides deeper insights into reaction process optimization, which will facilitate future applications in various reaction optimization processes.
基金Item Sponsored by National Natural Science Foundation of China (50234040)
文摘M, a particular industrial waste, was selected to detoxify chromium slag at a high temperature. The carbon remaining in M reduced Cr （ Ⅳ ） of Na2 CrO4 borne in the chromium slag to Cr （ Ⅲ ） in the solid phase reaction, and its thermodynamics and kinetics were studied. The reduction process of Na2CrO4 by carbon produced CO, whiCh＇was endothermic. Under the experimental condition, the apparent activation energy was 4. 41 kJ·mol^-1 , the＇apparent order of reaction for Na2 CrO4 was equal to one, and the partial pressure of CO was only 0.22 Pa at 1 330℃.
基金the National Natural Science Foundation of China(No.21878190)National Key R&D Program of China(2018YFB0605700)for financial support。
文摘Amine-based carbon dioxide(CO2)capture is still limited by high desorption energy consumption.Fixing CO2 into carbonate is a safer and more permanent method.In this work,calcium oxide(CaO)is introduced to perform chemical desorption instead of thermal desorption on 1,8-diazabicyclo[5.4.0]undec-7-ene(DBU)aqueous solution after CO2 absorption.The X-ray diffraction(XRD)patterns of solid products show the formation of calcite calcium carbonate(CaCO3),which prove the feasibility of this method.The effects of reaction temperature,reaction time and Ca2+/CO32-molar ratios on the related reactions in CO2 absorption-mineralization process and CaCO3 precipitation are discussed,and purer CaCO3 is obtained by ultrasonic treatment.The CaCO3 content can be increased to 95.8%and the CO2 desorption ratio can achieve 80%by 30 min ultrasonic dispersion treatment under the conditions(40℃,180 min,Ca2+/CO32-molar ratio=1.0).After five cycles,DBU aqueous solution shows stable CO2 absorption and mineralization ability.Fourier transform infrared spectroscopy(FT-IR)spectra of the reaction process also indicate the regeneration of the solvent.Compared with thermal desorption,this process is exothermic,almost without no additional heat.
基金supported by the National Key Research and Development Program (No. 2017YFB0305300)the National Natural Science Foundation of China (Nos. 51404157, 51374144)+1 种基金Public Welfare Projects of Science and Technology Department of Zhejiang Province (Grant No. 2017C31118)the Natural Science Foundation of Zhejiang Province (Grant No. LY17E050003)
文摘The influence of Cu content on the reaction process, reaction behavior and obtained products in the Cu-ZrC system, as well as their relationships, were investigated. The results showed that Zr C was synthesized through the diffusion and dissolution of C into a Cu-Zr liquid. Increasing the Cu content enhanced the amount of Cu-Zr liquid formed at the early stage but decreased the amount of C atoms dissolving into the melt at unit time. Consequently, the ignition time initially decreased and then increased. Conversely, with an increased Cu content, the energy required for igniting the neighboring unreacted powders increased,while the heat released by the reaction and the dwell time of the compact at high temperatures decreased.These effects then resulted in the reduction of combustion wave velocity, combustion temperature and Zr C particle size. Furthermore, the synthesis of ZrC is a multistage process, which provides a nonuniform distributed Zr C particle size. The sub-μm Zr C particle reinforced Cu matrix composite was fabricated by adding a ZrC-Cu master alloy prepared through a self-propagating high-temperature synthesis reaction into liquid Cu.
基金supported by the National Natural Science Foundation of China(grant nos.22203082,22303091,12227901,22025304,and 22033007)the Fundamental Research Funds for the Central Universities(grant no.WK9990000130)+1 种基金the Innovation Program for Quantum Science and Technology(grant no.2021ZD0303303)Hefei Comprehensive National Science Center.
文摘Identifying chemical reaction processes is essential for exploring the mechanism and optimizing the reaction.In situ spectroscopy can provide real-time information on molecules during chemical reactions to help reveal the reaction mechanism and dynamics.However,it is time-consuming and laborious to observe and decipher the spectra manually,and it is difficult for humans to capture the subtle differences between spectra,which makes it difficult to do quantitative analysis.The noise of the reaction systems also poses a greater challenge.Herein,we employed a combination of machine learning(ML)and spectroscopic techniques to establish a correlation between spectroscopic data and the processes of the carbon dioxide reduction reaction.By intelligently resolving the vibrational spectral signals,we can accurately identify the individual steps of the reaction.With a small amount of additional data,the approach is not only applicable to different systems,but also maintains good performance in noisy environments.Furthermore,we establish the spectrastructure quantitative relationship to obtain more refined reaction coordinates.Identifying chemical reaction processes using such an ML framework lays the foundation for unraveling the black box of chemical reactions between reactants and products,and provides a new strategy for understanding and optimizing chemical reactions.
基金Project(50274021) supported by the National Natural Science Foundation of China and Baoshan Iron and Steel Co., Ltd.
文摘β-Sialon/ZrN bonded corundum composites were synthesized using fused white corundum,alumina micro powder,zircon and carbon black by nitridation reaction sintering process. Phase composition and microstructure of the synthesized composites were investigated by X-ray powder diffraction and scanning electronic microscope,and the formation process of the composites was discussed. The results show that the composites with different compositions can be obtained by controlling the heating temperature and contents of zircon and carbon black. The proper temperature to synthesize the composites is 1773 K.
文摘The Mg_(2)Si-matrix thermoelectric material was synthesized by low temperature solid-state reaction.This paper studies the effects of holding time and reaction temperature on the particle size and the properties of the material,and also studies effects of doping elemental Sb,Te and their doping seqence on the properties of the material.The result shows that excessively high temperature and elongated holding time of solid-state reaction are harmful,there is a range of particle size to ensure optimum properties and the doping sequence of Sb or Te without influencing the properties.
基金Subsidized by the Special Funds for Major State Basic Research Projects of China(Contract/grant number:199064809)
文摘The effect of pan-milling on morphological structure,processability and properties of PVC was studied throughSEM,FTIR,granulometer,GPC and mechanical properties test in the hope of gaining ease in operation,needless ofplasticizers,a clean and efficient route for improving the processability of PVC through stress-induced reactions,fulfilling the idea of“plasticizing PVC by itself”.The experimental results show that during pan-milling at ambienttemperature,within 2-3 min,the microcrystalline structure of PVC becomes indistinct,the grain size of PVC is reducedfrom 130-160 μm to 1-50 μm the molecular weight of PVC is slightly decreased,the variation of molecular weightdistribution is indistinct,the plasticizing time and torque at balance drop a great deal from 71-132 s to 31-33 s and from18.2-22.1 Nm to 14.7-18.4 Nm,respectively,the processability of PVC is markedly improved,and the mechanicalproperties get enhanced too.
基金the National Key R&D Program of China(2016YFA0202804)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB17020400)+2 种基金the National Natural Science Foundation of China(Nos.21506204,21476226)Dalian Science Foundation for Distinguished Young Scholars(2016RJ04)the Youth Innovation Promotion Association CAS for financial support
文摘The oxide-zeolite process provides a promising way for one-step production of aromatics from syngas,whereas the reasons for the dramatic effect of intimacy between oxide and zeolite in the composite catalyst on the product selectivity are still unclear. In order to explore the optimal intimacy and the essential influence factors, ZnCrOxcombined with ZSM-5 are employed to prepare the composite catalysts with different distances between the two components by changing the mixing methods. An aromatic selectivity of 74%(with CO conversion to be 16%) is achieved by the composite catalyst when the intimacy is in the range of nanometer. A so-called ‘iterative reactions’ mechanism of intermediates over oxides is then proposed and studied: the intermediate chemical can undergo a hydrogenation reaction on oxide.So the shorter the intermediates stay on oxide, the more of chance for C-C coupling takes place on zeolite to form aromatics. Moreover, the aero-environments of reaction is found to impact on the extent of iterative reaction as well. Therefore, when the intimacy between the two components changes, the extent of iterative reactions vary, resulting in alteration of product distribution. This work provides new insight in understanding the mechanisms during the complex process of OX-ZEO composite catalysis and sheds light to the design of a high-yield catalyst for synthetization of aromatics from syngas.
文摘A novel technique combining electrophoretic deposition (EPD) and reaction bonding process (RBP) is developed to fabricate thick ZrO2/Al2O3 composite coatings. Mixed organic solvents are used here to make suspension containing yttria stablised zirconia (YSZ) and aluminium (Al). The results show that densely packed green form coatings are deposited using a mixture of ethanol and acetylacetone as suspension medium and ball milling for 48 hours. On subsequent heat treatment, melting and oxidation of aluminium in the green forms promote densification during sintering. By these means, thick, uniform and crack-free ZrtVA^Oa composite coatings have been fabricated on metal substrate.
文摘The experiment was carried out in a combined blowing converter.The natural gas was supplied as the cooling medium for the bottom lance.The blow- ing practice of medium P hot metal (0.30-0.85% [P]) indicated that with better stirring at the bottom of the converter and lower P_(CO),this steelmgking process was favorable to reduce the amount of [C] and [O] and increase the (P_2O_5)/[P]. The maximum rate of dephospborization might be high up to 0.0a5%/min and the P content in steel could be reduced to lower than 0.03% by single slag-forming operation.
文摘The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.
基金This work was supported by the National Natural Science Foundation of China (No. 50432010, 50372037).
文摘In situ Al2O3 whiskers reinforced Ti-Al intermetallic composites were fabricated at ~1200℃ by reaction sintering of cold-consolidated fillets consisting mainly of Ti, Al, and different additives. The phases and microstructures of the sintered composites were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS). The process of synthesis was investigated using differential thermal analysis (DTA). The effects of processing parameters and additives on the microstructures of the composites and the development of whisker were examined. It is found that the morphology of the whisker is strongly influenced by the additives, the exothermal reaction process, and the processing parameters.
基金Projects(51774070,51204054)supported by the National Natural Science Foundation of ChinaProject(150204009)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2014CB643405)supported by the National Basic Research Program of China
文摘The reaction kinetics of roasting zinc silicate using NaOH was investigated.The orthogonal test was employed to optimize the reaction conditions and the optimized reaction conditions were as follows:molar ratio of NaOH to Zn2SiO4 of 16:1,reaction temperature of 550°C,and reaction time of 2.5 h.In order to ascertain the phases transformation and reaction processes of zinc oxide and silica,the XRD phase analysis was used to analyze the phases of these specimens roasted at different temperatures.The final phases of the specimen roasted at 600°C were Na2ZnO2,Na4SiO4,Na2ZnSiO4 and NaOH.The reaction kinetic equation of roasting was determined by the shrinking unreacted core model.Aiming to investigate the reaction mechanism,two control models of reaction rate were applied:chemical reaction at the particle surface and diffusion through the product layer.The results indicated that the diffusion through the product layer model described the reaction process well.The apparent activation energy of the roasting was 19.77 kJ/mol.
基金the National High-Tech Research and Development Program of China (863 Program) (No. 2006AA03Z351).
文摘A new material with heat-resistant and adiabatic characteristics and high strength was prepared using the combustion synthesis method by mixed powders of CrO3, Al, Al2O3, and NaF in atmospheric gas. The reaction dynamic process of the Al-CrO3-NaF-Al2O3-N2-O2 new material system by the combustion synthesis method was discussed based on the observation results by SEM, EDS, and XRD in combination with the combustion front quenching method （CFQM） and the relation curves between reaction free enthalpies and the corresponding temperatures. The combustion synthesis mechanism and the formation reasons of the phase in the combustion product were analyzed.
文摘In this study, a powder mixture with an Al/TiO2 molar ratio of 10/3 was used to form an r-Al2Ti intermetallic matrix composite （IMC） reinforced with α-Al2O3 ceramic by a novel milling technique, called discontinuous mechanical milling （DMM） instead of milling and ignition of the produced thermite. The results of energy dispersive X-ray spectroscopy （EDX） and X-ray diffraction （XRD） of samples with varying milling time indicate that this fabrication process requires considerable mechanical energy. It is shown that Al2Ti-α-Al2O3 IMC with small grain size was produced by DMM after 15 h of ball milling. Peaks for γ-TLA1 as well as Al2Ti and Al2O3 are observed in XRD patterns after DMM followed by heat treatment. The microhardness of the DMM-treated composite produced after heat treatment was higher than Hv 700.
基金supported by the Fundamental Research Funds for the Central Universities(2018CDYJSY0055)the National Natural Science Foundation of China(21576034)+3 种基金Joint Funds of the National Natural Science Foundation of China-Guangdong(U1801254)the project funded by Chongqing Special Postdoctoral Science Foundation(Xm T2018043)Technological projects of Chongqing Municipal Education Commission(KJZDK201800801)the Innovative Research Team of Chongqing(CXTDG201602014)~~
文摘Charge separation and transformation are some of the key requirements for high-efficiency photocatalysis. The photocatalytic reaction mechanism provides a guideline for the development and commercialization of high-efficiency photocatalysts. In this study, we designed and favorably synthesized BMO@BOC heterojunctions via a facile solvothermal route and applied the heat treatment method for application in high-efficiency photocatalytic NO removal. More importantly, both continuous stream and intermittent stream methods with in situ diffuse reflectance infrared Fourier transform spectroscopy were applied to intuitively and dynamically investigate the adsorption process and oxidation process of NO removal over the photocatalyst surface. The intermediate products(NO-, NO2-, and NO2) were explicitly detected in both the adsorption process and oxidation process, whilst the final product(NO3-) appeared only in the oxidation process, owing to the separation, migration, and conversion of photoinduced electron-hole pairs.
