In this paper,a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation.The hydrodynamic performance of a T-barge is investigated...In this paper,a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation.The hydrodynamic performance of a T-barge is investigated in the frequency domain,and the coupled motions are analyzed in the time domain.We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well.The barge exhibits favorable hydrodynamic behavior in the considered sea state,and the equipment loads are allowable.Themooring systemand sway fender forces are within the permissible range.Based on these results,we can verify that the actual installation of the offshore platform is feasible.We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation,which is of great importance.As such,we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.展开更多
In this study,an environmental simulation platform(ETS-02)was constructed for high-precision geodesic instruments(e.g.,absolute/relative gravimeters and inclinometers),to test the disturbances caused by environmental ...In this study,an environmental simulation platform(ETS-02)was constructed for high-precision geodesic instruments(e.g.,absolute/relative gravimeters and inclinometers),to test the disturbances caused by environmental fl uctuations.The outer layer of the platform was constructed with two sets of rectangular electromagnetic coils,which generated the required magnetic fi eld when current was applied.The inner layer was a closed cabin in which radiators were distributed such that the temperature of the experimental space inside the cabin could be controlled,by energy exchange between the radiators and a thermal controller through the fl owing liquid.A high-precision hexapod was used to simulate the tilt-related eff ect.The platform was capable of adjusting temperatures within a dynamic range of 0℃-70℃ at a resolution of 0.01℃.The noise of the power-spectrum density when the cabin was set to room temperature was measured as 0.03℃/Hz^(1/2) at 1 mHz.The magnetic field simulation had a dynamic range of±300μT and stability of 20 nT.The resolution of the ground-tilt simulation was 1 arc s.The inner space of the platform had a volume of approximately 5 m^(3),which is sufficient for most types of instruments to be tested for a general environmental coupling effect.To illustrate the application of the platform,a dual-axis inclinometer was built and tested carefully with the platform,and the accuracy of the calibration factors was found to be signifi cantly improved.展开更多
In order to train and test the functionality of the CBTC signal system, this paper designs simulation platform’s architecture and function module based on the CBTC principle firstly. Then, it detailedly discusses the...In order to train and test the functionality of the CBTC signal system, this paper designs simulation platform’s architecture and function module based on the CBTC principle firstly. Then, it detailedly discusses the main content and key algorithms about train module and trackside module. Finally, it builds CBTC simulation test platform, used for training of rail transit signal related specialized student and detecting the main function of actual CBTC system based on Shanghai Metro Line 9.展开更多
This paper analyzes characteristics of multi type current transformers hybrid operation for each branch of the bus and their effects on differential protection of the bus. By theoretically analyzing transmission chara...This paper analyzes characteristics of multi type current transformers hybrid operation for each branch of the bus and their effects on differential protection of the bus. By theoretically analyzing transmission characteristics of multi type current transformers and their influence factors, we study the dynamic model testing method of multi type current transformers for the bus, and design 3 kinds of testing schemes by making the equivalent model based on the field of P-level current transformer, TPY-level current transformer and electronic current transformer, and build the hybrid operation testing platform of multi type current transformers. Finally, we compare and analyze the transmission characteristics difference of multi type current transformers on the same branch and the characteristics difference of hybrid operation in two successive external faults, analyze the cause behind the differences, and put forward the corresponding improvement measures.展开更多
With the iterative development of autonomous driving technology,selfdriving cars will be one of the most competitive areas in the future.In order to provide students with a better understanding and more comprehensive ...With the iterative development of autonomous driving technology,selfdriving cars will be one of the most competitive areas in the future.In order to provide students with a better understanding and more comprehensive grasp of autonomous driving technology,a hardware-in-the-loop based autonomous driving simulation test platform has been built.The hardware-in-the-loop system integrates MATLAB/Simulink to build the core control algorithm model,CarMaker simulation software to provide a virtual display interface and vehicle dynamics model,and NVIDIA Jetson to deploy the ECU(Electronic Control Unit)to improve the algorithm power and Logitech G29 series driving simulators providing signal input.It provides a simulation test platform for the development and testing of advanced driver assistance systems,the development and testing of upper layer control algorithms and underlying actuators for autonomous driving,and can provide a teaching and experimental platform for undergraduate students and a development foundation for postgraduate practice.展开更多
基金supported by Marine Engineering Equipment Scientific Research Project of Ministry of Industry and Information Technology of PRC and the Application of float-over installation simulation in Wangchang Project of CNOOC Technology ProjectThe Fundamental Research Funds for the Central Universities(HEUCF170102)
文摘In this paper,a numerical investigation of a float-over installation for an offshore platform is presented to verify the feasibility of the actual installation.The hydrodynamic performance of a T-barge is investigated in the frequency domain,and the coupled motions are analyzed in the time domain.We then compare with those of the model test and determine that the response amplitude operator and the time series agree quite well.The barge exhibits favorable hydrodynamic behavior in the considered sea state,and the equipment loads are allowable.Themooring systemand sway fender forces are within the permissible range.Based on these results,we can verify that the actual installation of the offshore platform is feasible.We accurately simulated many important factors and effectively reduced the risk associated with the offshore installation,which is of great importance.As such,we demonstrate that the numerical simulation of the float-over installation for offshore platforms has practical engineering significance.
基金This work was supported by National Scientifi c Instrument Development Fund(No.ZDYZ2012-1-04)State Natural Sciences Fund(No.11235004,91636112,41474163).
文摘In this study,an environmental simulation platform(ETS-02)was constructed for high-precision geodesic instruments(e.g.,absolute/relative gravimeters and inclinometers),to test the disturbances caused by environmental fl uctuations.The outer layer of the platform was constructed with two sets of rectangular electromagnetic coils,which generated the required magnetic fi eld when current was applied.The inner layer was a closed cabin in which radiators were distributed such that the temperature of the experimental space inside the cabin could be controlled,by energy exchange between the radiators and a thermal controller through the fl owing liquid.A high-precision hexapod was used to simulate the tilt-related eff ect.The platform was capable of adjusting temperatures within a dynamic range of 0℃-70℃ at a resolution of 0.01℃.The noise of the power-spectrum density when the cabin was set to room temperature was measured as 0.03℃/Hz^(1/2) at 1 mHz.The magnetic field simulation had a dynamic range of±300μT and stability of 20 nT.The resolution of the ground-tilt simulation was 1 arc s.The inner space of the platform had a volume of approximately 5 m^(3),which is sufficient for most types of instruments to be tested for a general environmental coupling effect.To illustrate the application of the platform,a dual-axis inclinometer was built and tested carefully with the platform,and the accuracy of the calibration factors was found to be signifi cantly improved.
文摘In order to train and test the functionality of the CBTC signal system, this paper designs simulation platform’s architecture and function module based on the CBTC principle firstly. Then, it detailedly discusses the main content and key algorithms about train module and trackside module. Finally, it builds CBTC simulation test platform, used for training of rail transit signal related specialized student and detecting the main function of actual CBTC system based on Shanghai Metro Line 9.
文摘This paper analyzes characteristics of multi type current transformers hybrid operation for each branch of the bus and their effects on differential protection of the bus. By theoretically analyzing transmission characteristics of multi type current transformers and their influence factors, we study the dynamic model testing method of multi type current transformers for the bus, and design 3 kinds of testing schemes by making the equivalent model based on the field of P-level current transformer, TPY-level current transformer and electronic current transformer, and build the hybrid operation testing platform of multi type current transformers. Finally, we compare and analyze the transmission characteristics difference of multi type current transformers on the same branch and the characteristics difference of hybrid operation in two successive external faults, analyze the cause behind the differences, and put forward the corresponding improvement measures.
文摘With the iterative development of autonomous driving technology,selfdriving cars will be one of the most competitive areas in the future.In order to provide students with a better understanding and more comprehensive grasp of autonomous driving technology,a hardware-in-the-loop based autonomous driving simulation test platform has been built.The hardware-in-the-loop system integrates MATLAB/Simulink to build the core control algorithm model,CarMaker simulation software to provide a virtual display interface and vehicle dynamics model,and NVIDIA Jetson to deploy the ECU(Electronic Control Unit)to improve the algorithm power and Logitech G29 series driving simulators providing signal input.It provides a simulation test platform for the development and testing of advanced driver assistance systems,the development and testing of upper layer control algorithms and underlying actuators for autonomous driving,and can provide a teaching and experimental platform for undergraduate students and a development foundation for postgraduate practice.
