As one of the alloy-type lithium-ion electrodes,Bi has outstanding application prospects for large volume capacity(3800 mAh·cm^(-3))and high electronic conductivity(1.4×10^(7)S·m^(-1)).However,the fast-...As one of the alloy-type lithium-ion electrodes,Bi has outstanding application prospects for large volume capacity(3800 mAh·cm^(-3))and high electronic conductivity(1.4×10^(7)S·m^(-1)).However,the fast-charging performance is hindered by significant volume expansion(>218%)and a low rate of phase diffusion.To overcome these two problems,an N-doped carbon nanoflower coating layer was elaborately in-situ reconstructed on a multiple-wall Bi microsphere by hydrothermal methods and subsequent calcination in this study.The carbon nanoflowers greatly increase specific surface area(40.0 m^(2)·g^(-1))and alleviate the volume expansion(130%).In addition,the incorporation of N-doped carbon nanoflowers leads to a gradual enhancement in the Li adsorption energy of Bi during the process of lithium insertion and improves the electrical conductivity.Therefore,the contribution rate of pseudo-capacitance reached 87.5%at the scan rate of 0.8 mV·s^(-1),and the Li-ion diffusion coefficient(D_(Li^(+)))was calculated in the range of 10^(-10)to 10^(-12)cm^(2)·s^(-1).The Bi@CNFs anode provided a high specific volumetric capacity of 2117.0 mAh·cm^(-3)at 5C and a high capacity retention ratio of 93.2%after 800 cycles.The Bi@CNFs//LiFePO_(4)full cell also displayed a stable capacity of 113.9 mAh·g^(-1)and energy density of 296.1 Wh·kg^(-1)after 100 cycles with a Coulombic efficiency of 97.6%.The mechanism of fast-charging lithium storage was verified by distribution of relaxation time analysis and density functional theory calculation.This paper provides a new strategy to increase the pseudo-capacitance and reduce the volume expansion for the preparation of alloy-type fast-charging electrodes.展开更多
Developing high-performance anode materials is crucial for the advancement of sodium-ion capacitors with high-energy density and large power density.Bimetallic oxides exhibit a high specific capacity due to their syne...Developing high-performance anode materials is crucial for the advancement of sodium-ion capacitors with high-energy density and large power density.Bimetallic oxides exhibit a high specific capacity due to their synergistic effects in electrochemical processes.However,challenges such as poor electrical conductivity,slow ion transport,and volume expansion severely limit their development.In this study,Co_(2)VO_(4)@C-1.5 was synthesized through a straightforward method involving solvent-heating and carbonization via calcination.The synergistic effect of Co and V,mitigation of volume expansion by the carbon-coated layer,enhancement of pseudocapacitive behavior and improved electrical conductivity of Co_(2)VO_(4)@C-1.5 contribute to its superior electrochemical performance.The specific capacity of Co_(2)VO_(4)@C-1.5 remained steady at 288.8 and 171.7 mAh g^(-1)after 100 and 500 cycles at 100 and 1000 mA g^(-1),respectively.Density functional theory(DFT)calculations show a notable reduction in the energy barrier of Co_(2)VO_(4)@C-1.5.Furthermore,the assembled sodium-ion capacitor Co_(2)VO_(4)@C-1.5//AC demonstrates high-energy density(108.5 Wh kg^(-1)at 99.8 W kg^(-1)),remarkable power density(38.2 Wh kg^(-1)at 12,000 W kg^(-1)),and longcycle stability(capacity retention of 80.6%after 6000 cycles).The design and optimization of the carbon-coated structure provide valuable insights for the development of bimetallic oxide materials in sodium-ion capacitors(SICs).展开更多
A kind of ruthenium oxide with smaller particles and higher porosity was prepared by a sol-gel process with RuCl3·xH2O and NaHCO3 solution. Several details concerning this new material, including crystal structur...A kind of ruthenium oxide with smaller particles and higher porosity was prepared by a sol-gel process with RuCl3·xH2O and NaHCO3 solution. Several details concerning this new material, including crystal structure, particle size as functions of the temperature, and electrochemical properties were also reported. The optimal annealing temperature was 210 ℃ and the powder annealed at this temperature had a rate capacitance of 541 F/g. In addition, the rate capacitance of the composite electrode reached 802 F/g after 10% carbon black was added, much higher than any previously reported value. High energy density supercapacitors were built with the newly discovered electrode material. Energy densities as high as 67 J/g were obtained based on the RuO2·xH2O alone. By introducing the highly porous carbon black into the electrode, energy densities great than 100 J/g could be achieved. The power density of the capacitor was enhanced significantly.展开更多
Nickel oxide(NiO)hollow microspheres with hierarchical structure were fabricated through a process consisting of a self-assembling,hydrothermal reaction and calcination.The prepared NiO hollow microspheres composed of...Nickel oxide(NiO)hollow microspheres with hierarchical structure were fabricated through a process consisting of a self-assembling,hydrothermal reaction and calcination.The prepared NiO hollow microspheres composed of many nanoflakes,are about 2-3μm in diameter.The length of the NiO flakes,having clear edges,is about 500-700 nm,while the thickness is only about 40-50 nm.This indicates that the NiO microspheres possess a hierarchical structure that can provide porous channels to facilitate the transmission of both electrons and electrolyte ions.NiO microspheres exhibit a high specific capacitance of about 1340 F/g at a current density of 1 A/g and high capacitance retention about 96.5%after 1000 cycles.What’s more,the conductive mechanism of nickel oxide for electrochemical capacitor electrodes was also studied.展开更多
A new application of metal organic framework （MOF） as a pseudo-capacitive material for supercapacitors is investigated. To this end, a simple nickel-based MOF, formulated Ni3（btc）2.12H2O, is synthesized via a hydr...A new application of metal organic framework （MOF） as a pseudo-capacitive material for supercapacitors is investigated. To this end, a simple nickel-based MOF, formulated Ni3（btc）2.12H2O, is synthesized via a hydrothermal reaction. As an electro-active material, such nickel-based MOF exhibits superior pseudo- capacitive behavior in KOH aqueous electrolyte with a high specific capacitance of 726 F g-1. Also, it displays good electrochemical stability with 94.6% of the initial capacitance over consecutive 1000 cycles. In addition, a simple asymmetric supercapacitor with a high energy density of 16.5 Wh kg-1 is successfully built using the nickel-based MOF as positive electrode and commercial activated carbon as negative electrode in KOH electrolyte.展开更多
Pseudo-capacitive negative electrodes remain a major bottleneck in the development of supercapacitor devices with high energy density because the electric double-layer capacitance of the negative electrodes does not m...Pseudo-capacitive negative electrodes remain a major bottleneck in the development of supercapacitor devices with high energy density because the electric double-layer capacitance of the negative electrodes does not match the pseudocapacitance of the corresponding positive electrodes.In the present study,a strategically improved Ni-Co-Mo sulfide is demonstrated to be a promising candidate for high energy density supercapattery devices due to its sustained pseudocapacitive charge storage mechanism.The pseudocapacitive behavior is enhanced when operating under a high current through the addition of a classical Schottky junction next to the electrode-electrolyte interface using atomic layer deposition.The Schottky junction accelerates and decelerates the diffusion of OH-/K+ions during the charging and discharging processes,respectively,to improve the pseudocapacitive behavior.The resulting pseudocapacitive negative electrodes exhibits a specific capacity of 2,114 C g^(-1)at 2 A g^(-1)matches almost that of the positive electrode’s 2,795 C g^(-1)at 3 A g^(-1).As a result,with the equivalent contribution from the positive and negative electrodes,an energy density of 236.1 Wh kg^(-1)is achieved at a power density of 921.9 W kg^(-1)with a total active mass of 15 mg cm-2.This strategy demonstrates the possibility of producing supercapacitors that adapt well to the supercapattery zone of a Ragone plot and that are equal to batteries in terms of energy density,thus,offering a route for further advances in electrochemical energy storage and conversion processes.展开更多
The fabrication and characterization of new type Nickel oxide/KOH/Activecarbon super-capacitor have been described. Porous nickel oxide was prepared by hydrolysis of nickelacetate and heated in air at 300 deg C. The r...The fabrication and characterization of new type Nickel oxide/KOH/Activecarbon super-capacitor have been described. Porous nickel oxide was prepared by hydrolysis of nickelacetate and heated in air at 300 deg C. The resulting nickel oxide behaved as an electrochemicalcapacitor electrode with a specific capacitance (50-70 F/g) superior to most active carbonelectrodes. This kind of nickel oxide maintained high utilization at high rate of discharge (i.e.,high power density) and had excellent cycle life more than 1000 times, while the capacitance of thecell composed of two identical nickel oxide electrodes was poor at high discharge current densityand the maximum operational voltage of this type capacitor was limited to 0.5 V. A new typesuper-capacitor was designed in which the nickel oxide and the active carbon were applied to thepositive and negative electrodes respectively. The breakdown voltage of this type super-capacitorwas improved effectively to 0.8 V and excellent characteristic of high power discharge was attainedin this way. The Nickel oxide/KOH/Active carbon super-capacitor has promising potentials in portabletelecommunications, uninterruptable power supplies and battery load leveling applications.展开更多
Pseudo-capacitive mechanisms can provide higher energy densities than electrical double-layer capacitors while being faster than bulk storage mechanisms.Usually,they suffer from low intrinsic electronic and ion conduc...Pseudo-capacitive mechanisms can provide higher energy densities than electrical double-layer capacitors while being faster than bulk storage mechanisms.Usually,they suffer from low intrinsic electronic and ion conductivities of the active materials.Here,taking advantage of the combination of TiS2 decoration,sulfur doping,and a nanometer-sized structure,as-spun TiO2/C nanofiber composites are developed that enable rapid transport of sodium ions and electrons,and exhibit enhanced pseudo-capacitively dominated capacities.At a scan rate of 0.5 mV s−1,a high pseudo-capacitive contribution(76%of the total storage)is obtained for the S-doped TiS2/TiO2/C electrode(termed as TiS2/S-TiO2/C).Such enhanced pseudocapacitive activity allows rapid chemical kinetics and significantly improves the high-rate sodium storage performance of TiO2.The TiS2/S-TiO2/C composite electrode delivers a high capacity of 114 mAh g−1 at a current density of 5000 mA g−1.The capacity maintains at high level(161 mAh g−1)even after 1500 cycles and is still characterized by 58 mAh g−1 at the extreme condition of 10,000 mA g−1 after 10,000 cycles.展开更多
Since carbon nanotubes（CNTs） possess unique one dimensional（1D） structure, considerable attention has been paid to constructing CNTs into macroscopic materials with different dimensions, including 1D fibers,2D fil...Since carbon nanotubes（CNTs） possess unique one dimensional（1D） structure, considerable attention has been paid to constructing CNTs into macroscopic materials with different dimensions, including 1D fibers,2D films, and 3D foams. Such macroscopic CNT materials exhibit high conductivity, large surface area, as well as good mechanical properties, and thus can be directly used as the flexible supercapacitor（SC） electrodes or the scaffolds for supporting pseudo-capacitive electrode materials. Based on these macroscopic CNT electrodes, diverse SCs with different structures, including flexible, stretchable and/or compressible fiber and thin film SCs, have been designed. This review provides an overview of recent progress towards the development of flexible SCs based on macroscopic CNTs-based electrodes, with a focus on electrode preparation and configuration design as well as their integration with other multifunctional devices.Future development and prospects in the CNTs-based flexible SCs are also discussed.展开更多
基金supported by the project of the National Natural Science Foundation of China(NSFC,Nos.5216040127,52164048 and U1802256)Central Guidance for Local Science and Technology Development Funds(No.202107AB110011)the Analysis and Test Funds of Kunming University of Science and Technology(No.2021M0202230188).
文摘As one of the alloy-type lithium-ion electrodes,Bi has outstanding application prospects for large volume capacity(3800 mAh·cm^(-3))and high electronic conductivity(1.4×10^(7)S·m^(-1)).However,the fast-charging performance is hindered by significant volume expansion(>218%)and a low rate of phase diffusion.To overcome these two problems,an N-doped carbon nanoflower coating layer was elaborately in-situ reconstructed on a multiple-wall Bi microsphere by hydrothermal methods and subsequent calcination in this study.The carbon nanoflowers greatly increase specific surface area(40.0 m^(2)·g^(-1))and alleviate the volume expansion(130%).In addition,the incorporation of N-doped carbon nanoflowers leads to a gradual enhancement in the Li adsorption energy of Bi during the process of lithium insertion and improves the electrical conductivity.Therefore,the contribution rate of pseudo-capacitance reached 87.5%at the scan rate of 0.8 mV·s^(-1),and the Li-ion diffusion coefficient(D_(Li^(+)))was calculated in the range of 10^(-10)to 10^(-12)cm^(2)·s^(-1).The Bi@CNFs anode provided a high specific volumetric capacity of 2117.0 mAh·cm^(-3)at 5C and a high capacity retention ratio of 93.2%after 800 cycles.The Bi@CNFs//LiFePO_(4)full cell also displayed a stable capacity of 113.9 mAh·g^(-1)and energy density of 296.1 Wh·kg^(-1)after 100 cycles with a Coulombic efficiency of 97.6%.The mechanism of fast-charging lithium storage was verified by distribution of relaxation time analysis and density functional theory calculation.This paper provides a new strategy to increase the pseudo-capacitance and reduce the volume expansion for the preparation of alloy-type fast-charging electrodes.
基金financially supported by the Applied Basic Research Project of Qinghai Province(No.2024-ZJ-766)the Youth Innovation Promotion Association CAS(No.2018466)
文摘Developing high-performance anode materials is crucial for the advancement of sodium-ion capacitors with high-energy density and large power density.Bimetallic oxides exhibit a high specific capacity due to their synergistic effects in electrochemical processes.However,challenges such as poor electrical conductivity,slow ion transport,and volume expansion severely limit their development.In this study,Co_(2)VO_(4)@C-1.5 was synthesized through a straightforward method involving solvent-heating and carbonization via calcination.The synergistic effect of Co and V,mitigation of volume expansion by the carbon-coated layer,enhancement of pseudocapacitive behavior and improved electrical conductivity of Co_(2)VO_(4)@C-1.5 contribute to its superior electrochemical performance.The specific capacity of Co_(2)VO_(4)@C-1.5 remained steady at 288.8 and 171.7 mAh g^(-1)after 100 and 500 cycles at 100 and 1000 mA g^(-1),respectively.Density functional theory(DFT)calculations show a notable reduction in the energy barrier of Co_(2)VO_(4)@C-1.5.Furthermore,the assembled sodium-ion capacitor Co_(2)VO_(4)@C-1.5//AC demonstrates high-energy density(108.5 Wh kg^(-1)at 99.8 W kg^(-1)),remarkable power density(38.2 Wh kg^(-1)at 12,000 W kg^(-1)),and longcycle stability(capacity retention of 80.6%after 6000 cycles).The design and optimization of the carbon-coated structure provide valuable insights for the development of bimetallic oxide materials in sodium-ion capacitors(SICs).
文摘A kind of ruthenium oxide with smaller particles and higher porosity was prepared by a sol-gel process with RuCl3·xH2O and NaHCO3 solution. Several details concerning this new material, including crystal structure, particle size as functions of the temperature, and electrochemical properties were also reported. The optimal annealing temperature was 210 ℃ and the powder annealed at this temperature had a rate capacitance of 541 F/g. In addition, the rate capacitance of the composite electrode reached 802 F/g after 10% carbon black was added, much higher than any previously reported value. High energy density supercapacitors were built with the newly discovered electrode material. Energy densities as high as 67 J/g were obtained based on the RuO2·xH2O alone. By introducing the highly porous carbon black into the electrode, energy densities great than 100 J/g could be achieved. The power density of the capacitor was enhanced significantly.
基金Project(51274248)supported by the National Natural Science Foundation of ChinaProject(201FA31440)supported by the International S&T Cooperation Program of China
文摘Nickel oxide(NiO)hollow microspheres with hierarchical structure were fabricated through a process consisting of a self-assembling,hydrothermal reaction and calcination.The prepared NiO hollow microspheres composed of many nanoflakes,are about 2-3μm in diameter.The length of the NiO flakes,having clear edges,is about 500-700 nm,while the thickness is only about 40-50 nm.This indicates that the NiO microspheres possess a hierarchical structure that can provide porous channels to facilitate the transmission of both electrons and electrolyte ions.NiO microspheres exhibit a high specific capacitance of about 1340 F/g at a current density of 1 A/g and high capacitance retention about 96.5%after 1000 cycles.What’s more,the conductive mechanism of nickel oxide for electrochemical capacitor electrodes was also studied.
基金supported by the National Natural Science Foundation of China(No.21203223)
文摘A new application of metal organic framework （MOF） as a pseudo-capacitive material for supercapacitors is investigated. To this end, a simple nickel-based MOF, formulated Ni3（btc）2.12H2O, is synthesized via a hydrothermal reaction. As an electro-active material, such nickel-based MOF exhibits superior pseudo- capacitive behavior in KOH aqueous electrolyte with a high specific capacitance of 726 F g-1. Also, it displays good electrochemical stability with 94.6% of the initial capacitance over consecutive 1000 cycles. In addition, a simple asymmetric supercapacitor with a high energy density of 16.5 Wh kg-1 is successfully built using the nickel-based MOF as positive electrode and commercial activated carbon as negative electrode in KOH electrolyte.
基金financially supported by the National Research Foundation of Korea(NRF-2022R1A2C2010803)。
文摘Pseudo-capacitive negative electrodes remain a major bottleneck in the development of supercapacitor devices with high energy density because the electric double-layer capacitance of the negative electrodes does not match the pseudocapacitance of the corresponding positive electrodes.In the present study,a strategically improved Ni-Co-Mo sulfide is demonstrated to be a promising candidate for high energy density supercapattery devices due to its sustained pseudocapacitive charge storage mechanism.The pseudocapacitive behavior is enhanced when operating under a high current through the addition of a classical Schottky junction next to the electrode-electrolyte interface using atomic layer deposition.The Schottky junction accelerates and decelerates the diffusion of OH-/K+ions during the charging and discharging processes,respectively,to improve the pseudocapacitive behavior.The resulting pseudocapacitive negative electrodes exhibits a specific capacity of 2,114 C g^(-1)at 2 A g^(-1)matches almost that of the positive electrode’s 2,795 C g^(-1)at 3 A g^(-1).As a result,with the equivalent contribution from the positive and negative electrodes,an energy density of 236.1 Wh kg^(-1)is achieved at a power density of 921.9 W kg^(-1)with a total active mass of 15 mg cm-2.This strategy demonstrates the possibility of producing supercapacitors that adapt well to the supercapattery zone of a Ragone plot and that are equal to batteries in terms of energy density,thus,offering a route for further advances in electrochemical energy storage and conversion processes.
基金the National Natural Science Foundation of China (No.59807001).
文摘The fabrication and characterization of new type Nickel oxide/KOH/Activecarbon super-capacitor have been described. Porous nickel oxide was prepared by hydrolysis of nickelacetate and heated in air at 300 deg C. The resulting nickel oxide behaved as an electrochemicalcapacitor electrode with a specific capacitance (50-70 F/g) superior to most active carbonelectrodes. This kind of nickel oxide maintained high utilization at high rate of discharge (i.e.,high power density) and had excellent cycle life more than 1000 times, while the capacitance of thecell composed of two identical nickel oxide electrodes was poor at high discharge current densityand the maximum operational voltage of this type capacitor was limited to 0.5 V. A new typesuper-capacitor was designed in which the nickel oxide and the active carbon were applied to thepositive and negative electrodes respectively. The breakdown voltage of this type super-capacitorwas improved effectively to 0.8 V and excellent characteristic of high power discharge was attainedin this way. The Nickel oxide/KOH/Active carbon super-capacitor has promising potentials in portabletelecommunications, uninterruptable power supplies and battery load leveling applications.
基金This work was financially supported by National Key R&D Program of China(No.2018YFB0905400)the National Natural Science Foundation of China(Nos.51925207,51872277,and U1910210)+2 种基金Dalian National Laboratory For Clean Energy(DNL)Cooperation Fund,the CAS(DNL180310)the Fundamental Research Funds for the Central Universities(Wk2060140026)Sofja Kovalevskaja award of the Humboldt Society.This project has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No.823717-ESTEEM3.
文摘Pseudo-capacitive mechanisms can provide higher energy densities than electrical double-layer capacitors while being faster than bulk storage mechanisms.Usually,they suffer from low intrinsic electronic and ion conductivities of the active materials.Here,taking advantage of the combination of TiS2 decoration,sulfur doping,and a nanometer-sized structure,as-spun TiO2/C nanofiber composites are developed that enable rapid transport of sodium ions and electrons,and exhibit enhanced pseudo-capacitively dominated capacities.At a scan rate of 0.5 mV s−1,a high pseudo-capacitive contribution(76%of the total storage)is obtained for the S-doped TiS2/TiO2/C electrode(termed as TiS2/S-TiO2/C).Such enhanced pseudocapacitive activity allows rapid chemical kinetics and significantly improves the high-rate sodium storage performance of TiO2.The TiS2/S-TiO2/C composite electrode delivers a high capacity of 114 mAh g−1 at a current density of 5000 mA g−1.The capacity maintains at high level(161 mAh g−1)even after 1500 cycles and is still characterized by 58 mAh g−1 at the extreme condition of 10,000 mA g−1 after 10,000 cycles.
基金supported by the MOST (Ministry of Science and Technology of China) (No. 2017YFA0206701)NSFC (National Natural Science Foundation of China) (Nos. 51602218, 21573116, 11604242)+1 种基金MOE (Ministry of Education of China) (No. B12015)Tianjin Basic and High-Tech Development (No. 15JCYBJC17300)
文摘Since carbon nanotubes（CNTs） possess unique one dimensional（1D） structure, considerable attention has been paid to constructing CNTs into macroscopic materials with different dimensions, including 1D fibers,2D films, and 3D foams. Such macroscopic CNT materials exhibit high conductivity, large surface area, as well as good mechanical properties, and thus can be directly used as the flexible supercapacitor（SC） electrodes or the scaffolds for supporting pseudo-capacitive electrode materials. Based on these macroscopic CNT electrodes, diverse SCs with different structures, including flexible, stretchable and/or compressible fiber and thin film SCs, have been designed. This review provides an overview of recent progress towards the development of flexible SCs based on macroscopic CNTs-based electrodes, with a focus on electrode preparation and configuration design as well as their integration with other multifunctional devices.Future development and prospects in the CNTs-based flexible SCs are also discussed.
