To investigate groundwater flow and solute transport characteristics of the karst trough zone in China,tracer experiments were conducted at two adjacent typical karst groundwater flow systems(Yuquandong(YQD)and Migong...To investigate groundwater flow and solute transport characteristics of the karst trough zone in China,tracer experiments were conducted at two adjacent typical karst groundwater flow systems(Yuquandong(YQD)and Migongquan(MGQ))in Sixi valley,western Hubei,China.Highresolution continuous monitoring was utilized to obtain breakthrough curves(BTCs),which were then analyzed using the multi-dispersion model(MDM)and the two-region nonequilibrium model(2RNE)with basic parameters calculated by CXTFIT and QTRACER2.Results showed that:(1)YQD flow system had a complex infiltration matrix with overland flow,conduit flow and fracture flow,while the MGQ flow system was dominated by conduit flow with fast flow transport velocity,but also small amount of fracture flow there;(2)They were well fitted based on the MDM(R^2=0.928)and 2RNE(R^2=0.947)models,indicating that they had strong adaptability in the karst trough zone;(3)conceptual models for YQD and MGQ groundwater systems were generalized.In YQD system,the solute was transported via overland flow during intense rainfall,while some infiltrated down into fissures and conduits.In MGQ system,most were directly transported to spring outlet in the fissureconduit network.展开更多
Erratum to:International Journal of Minerals,Metallurgy and Materials Volume 31,Number 1,January 2024,Page 186 https://doi.org/10.1007/s12613-023-2744-0 The original version of this article unfortunately contained thr...Erratum to:International Journal of Minerals,Metallurgy and Materials Volume 31,Number 1,January 2024,Page 186 https://doi.org/10.1007/s12613-023-2744-0 The original version of this article unfortunately contained three mistakes.The presentation of Fig.8 in original version was incorrect.The correct version is given below.展开更多
The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
Vacuum-ultraviolet(VUV)radiation is high-energy UV radiation with a wavelength of 100-200 nm capable of decomposing/mineralizing hazardous emerging organic pollutants(EPs)in water through direct photolysis and/or by g...Vacuum-ultraviolet(VUV)radiation is high-energy UV radiation with a wavelength of 100-200 nm capable of decomposing/mineralizing hazardous emerging organic pollutants(EPs)in water through direct photolysis and/or by generating reactive free radicals(RFRs)during photolysis.However,due to the unsatisfactory photoelectric conversion rate,strong absorption by oxygen and water molecules,and other characteristics of VUV radiation,its application and development are hindered,leading to misconceptions regarding high energy consumption and insufficient free radical yield.The objectives of our assessment in this review are as follows:The illumination of the photochemical characteristics of VUV and the reactivity of aqueous solutions.Summarization of accurate UV dose and energy evaluation criteria.Comparison and analysis of the photochemical mechanisms and reaction kinetics of different types of EPs via VUV direct photolysis,as well as the interference origins of typical substrates in water for VUV decontamination.We found that quantities typically reported in VUV photochemical reactions of engineered systems are underreported in low-pressure mercury lamp(LPUV)photochemical reactions,especially a quantitative indicator of the species or energy that induces a chemical reaction.The absence of these quantities has made it difficult to assess the fundamental performance of VUV photolysis fully compared with that of UV-C.Some studies have sought to optimize VUV-advanced reduction processes(VUV-ARP)or VUV reactor treatment of these contaminants;however,an abundant evaluation of the reaction origins and processes between VUV-derived main RFRs and reactants(H_(2)O,O_(2),organic matter,inorganic ions,etc.)is essential,cause these scientific elements will provide the possibility to break the application gap for VUV in the field of EPs treating.Overall,the data compilation,analysis,and research recommendations provided in this review will form the basis for all photochemical reactions initiated by VUV radiation with water as the backing agent.展开更多
In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical propert...In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.展开更多
Traffic at urban intersections frequently encounters unexpected obstructions,resulting in congestion due to uncooperative and priority-based driving behavior.This paper presents an optimal right-turn coordination syst...Traffic at urban intersections frequently encounters unexpected obstructions,resulting in congestion due to uncooperative and priority-based driving behavior.This paper presents an optimal right-turn coordination system for Connected and Automated Vehicles(CAVs)at single-lane intersections,particularly in the context of left-hand side driving on roads.The goal is to facilitate smooth right turns for certain vehicles without creating bottlenecks.We consider that all approaching vehicles share relevant information through vehicular communications.The Intersection Coordination Unit(ICU)processes this information and communicates the optimal crossing or turning times to the vehicles.The primary objective of this coordination is to minimize overall traffic delays,which also helps improve the fuel consumption of vehicles.By considering information from upcoming vehicles at the intersection,the coordination system solves an optimization problem to determine the best timing for executing right turns,ultimately minimizing the total delay for all vehicles.The proposed coordination system is evaluated at a typical urban intersection,and its performance is compared to traditional traffic systems.Numerical simulation results indicate that the proposed coordination system significantly enhances the average traffic speed and fuel consumption compared to the traditional traffic system in various scenarios.展开更多
The composite material layering process has attracted considerable attention due to its production advantages,including high scalability and compatibility with a wide range of raw materials.However,changes in process ...The composite material layering process has attracted considerable attention due to its production advantages,including high scalability and compatibility with a wide range of raw materials.However,changes in process conditions can lead to degradation in layer quality and non-uniformity,highlighting the need for real-time monitoring to improve overall quality and efficiency.In this study,an AI-based monitoring system was developed to evaluate layer width and assess quality in real time.Three deep learning models Faster Region-based Convolutional Neural Network(R-CNN),You Only Look Once version 8(YOLOv8),and Single Shot MultiBox Detector(SSD)were compared,and YOLOv8 was ultimately selected for its superior speed,flexibility,and scalability.The selected model was integrated into a user-friendly interface.To verify the reliability of the system,bead width control experiments were conducted,which identified feed speed and extrusion speed as the key process parameters.Accordingly,a Central Composite Design(CCD)experimental plan with 13 conditions was applied to evaluate layer width and validate the system’s reliability.Finally,the proposed system was applied to the additive manufacturing of an aerospace component,where it successfully detected bead width deviations during printing and enabled stable fabrication with a maximum geometric deviation of approximately 6 mm.These findings demonstrate the critical role of real-time monitoring of layer width and quality in improving process stability and final product quality in composite material additive manufacturing.展开更多
Spartina alterniflora Loisel, a species vegetating in intertidal flats along the eastern coast of the United States, was introduced in China almost 30 years ago and has become an urgent topic due to its invasiveness i...Spartina alterniflora Loisel, a species vegetating in intertidal flats along the eastern coast of the United States, was introduced in China almost 30 years ago and has become an urgent topic due to its invasiveness in the coastal zone of China. The impacts of this alien species S. alterniflora on intertidal ecosystem processes in the Jiangsu coastland were investigated by comparing the sediment nutrient availability and trace element concentration characteristics in a mud flat and those of a four-year old Spartina salt marsh that had earlier been a mudflat. At each study site, fifteen plots were sampled in different seasons to determine the sediment characteristics along the tidal flats. The results suggested that Spartina salt marsh sediments had significantly higher total N, available P, and water content, but lower pH and bulk density than mudflat sediments. Sediment salinity, water content, total N, organic C, and available P decreased along a seaward gradient in the Spartina salt marsh and increased with vegetation biomass. Furthermore, the concentrations of trace elements and some metal elements in the sediment were higher under Spartina although these increases were not significant. Also, in the Spartina marsh, some heavy metals were concentrated in the surface layer of the sediment. The Spartina salt marsh in this study was only four years old; therefore, it is suggested that further study of this allen species on a longer time frame in the Jiangsu coastland should be carried out.展开更多
Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of ...Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, ＂X＂ type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that： （1） The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; （2） As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; （3） Sequential slip may have played an important role in forming conjugate fault intersections; （4） The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active ＂X＂ type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.展开更多
Due to large deserts on Earth surface a thorough understanding of climate change, landscape evolution and geomorphological processes having occurred in deserts is crucial for Earth System Science. The landscapes in de...Due to large deserts on Earth surface a thorough understanding of climate change, landscape evolution and geomorphological processes having occurred in deserts is crucial for Earth System Science. The landscapes in deserts are, however, diverse and different over the globe with regard to their geomorphological nature, human activities and geological histories. In the last decades a great number of efforts have been put to the investigation of the initial timing of the occurrence of arid climate, e. g. in northwestern China. Silty sediments in the downwind directions have been used to deduce the histories of deserts. In general, there is a lack of knowledge about processes and landscapes in Chinese drylands between the initial Miocene silt sedimentation at desert margins and the late Quaternary multiple occurrences of wetter climate with assumed large lakes in many of the deserts in northern China. The geomorphological concept of three primary triggering factors, i.e., the sediment supply, sediment availability and transport capacity of wind, and additionally the underground geology need to be fully considered for a better understanding of the environmental histories of sand seas which should not be viewed as equivalent for deserts because sand seas cover between 〈 1% and ca. 45% of the desert areas in various continents dependent on a complex interaction between various processes of both exogenous and endogenous origins.展开更多
Beijing faces the challenge of high levels of ozone(O_(3))pollution.In this study,the Weather Research and Forecasting model and Community Multiscale Air Qualitymodel(CMAQ)were used to simulate atmospheric O_(3) conce...Beijing faces the challenge of high levels of ozone(O_(3))pollution.In this study,the Weather Research and Forecasting model and Community Multiscale Air Qualitymodel(CMAQ)were used to simulate atmospheric O_(3) concentrations in Beijing.To investigate the formation mechanisms and source contributions of O_(3) pollution in different regions of Beijing,process analysis and the integrated source apportionmentmethodwithin the CMAQwere applied to O_(3) concentrations in the summer of 2018.The process analysis results showed that vertical diffusion was the major contributor to O_(3) concentrations at all receptor sites in Beijing,at>65.94μg/(m^(3)·hr).Gas-phase chemical reactions consumed a significant amount of O_(3) in urban and inner suburban areas(>−5.57μg/(m^(3)·hr)),while near-surface chemical reactions made positive contributions in outer suburban areas(>4.72μg/(m^(3)·hr)).The O_(3) formation chemical reactions indicated that NO titration,which removes O_(3) at night-time,mainly occurred in urban areas.The weaker chemical reactions occurring near the surface in outer suburbs suggested that suburban-area O_(3) was produced in the upper atmospheric layers and was transported vertically to the lower layers.The O_(3) source apportionment results showed that boundary contributions were the dominant contributor to O_(3) pollution in Beijing(>40%).The contribution of non-local emissions to O_(3) levels was significantly greater in the outer suburbs than in urban and inner suburban areas due to topography.This study increases the understanding of the complex processes of O_(3) formation in different areas of Beijing and informs the implementation of O_(3) control plans.展开更多
In this study,effects of elevated air temperatures on thermal and hydrologic process of the shallow soil in the active layer were investigated. Open-top chambers(OTCs)were utilized to increase air temperatures 1-2℃ i...In this study,effects of elevated air temperatures on thermal and hydrologic process of the shallow soil in the active layer were investigated. Open-top chambers(OTCs)were utilized to increase air temperatures 1-2℃ in OTC-1 and 3-5℃ in OTC-2 in the alpine meadow ecosystem on the Qinghai- Tibetan Plateau.Results show that the annual air temperatures under OTC-1 and OTC-2 were 1.21℃ and 3.62℃ higher than the Control,respectively.The entirely-frozen period of shallow soil in the active layer was shortened and the fully thawed period was prolonged with temperature increase.The maximum penetration depth and duration of the negative isotherm during the entirely-frozen period decreased, and soil freezing was retarded in the local scope of the soil profile when temperature increased.Meanwhile, the positive isotherm during the fully-thawed period increased,and the soil thawing was accelerated.Soil moisture under different manipulations decreased with the temperature increase at the same depth. During the early freezing period and the early fully- thawed period,the maximum soil moisture under the Control manipulation was at 0.2 m deep,whereas under OTC-1 and OTC-2 manipulations,the maximum soil moisture were at 0.4-0.5 m deep. These results indicate that elevated temperatures led to a decrease of the moisture in the surface soil.The coupled relationship between soil temperature and moisture was significantly affected by the temperature increase.During the freezing and thawing processes, the soil temperature and moisture under different manipulations fit the regression model given by the equationθV=a/{1+exp[b(TS+c)]}+d.展开更多
An extreme rainfall event occurred over Hangzhou,China,during the afternoon hours on 24 June 2013.This event occurred under suitable synoptic conditions and the maximum 4-h cumulative rainfall amount was over 150 mm.T...An extreme rainfall event occurred over Hangzhou,China,during the afternoon hours on 24 June 2013.This event occurred under suitable synoptic conditions and the maximum 4-h cumulative rainfall amount was over 150 mm.This rainfall event had two major rainbands.One was caused by a quasi-stationary convective line,and the other by a backbuilding convective line related to the interaction of the outflow boundary from the first rainband and an existing low-level mesoscale convergence line associated with a mei-yu frontal system.The rainfall event lasted 4 h,while the back-building process occurred in 2 h when the extreme rainfall center formed.So far,few studies have examined the back-building processes in the mei-yu season that are caused by the interaction of a mesoscale convergence line and a convective cold pool.The two rainbands are successfully reproduced by the Weather Research and Forecasting(WRF)model with fourlevel,two-way interactive nesting.In the model,new cells repeatedly occur at the west side of older cells,and the backbuilding process occurs in an environment with large CAPE,a low LFC,and plenty of water vapor.Outflows from older cells enhance the low-level convergence that forces new cells.High precipitation efficiency of the back-building training cells leads to accumulated precipitation of over 150 mm.Sensitivity experiments without evaporation of rainwater show that the convective cold pool plays an important role in the organization of the back-building process in the current extreme precipitation case.展开更多
A real-time pricing system of electricity is a system that charges different electricity prices for different hours of the day and for different days, and is effective for reducing the peak and flattening the load cur...A real-time pricing system of electricity is a system that charges different electricity prices for different hours of the day and for different days, and is effective for reducing the peak and flattening the load curve. In this paper, using a Markov decision process (MDP), we propose a modeling method and an optimal control method for real-time pricing systems. First, the outline of real-time pricing systems is explained. Next, a model of a set of customers is derived as a multi-agent MDP. Furthermore, the optimal control problem is formulated, and is reduced to a quadratic programming problem. Finally, a numerical simulation is presented.展开更多
This paper addresses the problem of robust iterative learning control design for a class of uncertain multiple-input multipleoutput discrete linear systems with actuator faults. The stability theory for linear repetit...This paper addresses the problem of robust iterative learning control design for a class of uncertain multiple-input multipleoutput discrete linear systems with actuator faults. The stability theory for linear repetitive processes is used to develop formulas for gain matrices design, together with convergent conditions in terms of linear matrix inequalities. An extension to deal with model uncertainty of the polytopic or norm bounded form is also developed and an illustrative example is given.展开更多
Thermodynamic processes of a system involving a floe and a small lead in the central Arctic were investigated during the ice-camp period of the third Chinese National Arctic Research Expedition from 20 to 28 August, 2...Thermodynamic processes of a system involving a floe and a small lead in the central Arctic were investigated during the ice-camp period of the third Chinese National Arctic Research Expedition from 20 to 28 August, 2008. The measurements included surface air temperatures above the floe, spectral albedo of the lead, seawater temperatures in the lead and under the ice cover, and the lateral and bottom mass balance of the floe. The surface air temperature at 1.15 m remained below 0~Cthroughout the observation period and sea ice had commenced its annual cycle of growth in response to autumn cooling during the study. The surface of the lead was frozen by 23 August, after which the spectral albedo of the thin-ice-covered lead in the band of 320-950 nm was 0.46 -0.03, the seawater temperatures both in the lead and under the ice cover, as well as the vertical seawater-temperature gradient in the lead decreased gradually, and the oceanic heat under the ice was maintained at a low level approaching 0 W/m2. By the end of the measurement, the thickness of the investigated floe had reached its annual minimum, while the lateral of the floe was still in the melting phase, with a mean melting rate of 1.0±0.3 cm/d during the measurement, responding to an equivalent latent heat flux of 21 ±6 W/m2. The lateral melting of the floe had made a more significant contribution to the sea-ice mass balance than the surface and bottom melting in the end of August.展开更多
Both wave-frequency(WF) and low-frequency(LF) components of mooring tension are in principle non-Gaussian due to nonlinearities in the dynamic system.This paper conducts a comprehensive investigation of applicable pro...Both wave-frequency(WF) and low-frequency(LF) components of mooring tension are in principle non-Gaussian due to nonlinearities in the dynamic system.This paper conducts a comprehensive investigation of applicable probability density functions(PDFs) of mooring tension amplitudes used to assess mooring-line fatigue damage via the spectral method.Short-term statistical characteristics of mooring-line tension responses are firstly investigated,in which the discrepancy arising from Gaussian approximation is revealed by comparing kurtosis and skewness coefficients.Several distribution functions based on present analytical spectral methods are selected to express the statistical distribution of the mooring-line tension amplitudes.Results indicate that the Gamma-type distribution and a linear combination of Dirlik and Tovo-Benasciutti formulas are suitable for separate WF and LF mooring tension components.A novel parametric method based on nonlinear transformations and stochastic optimization is then proposed to increase the effectiveness of mooring-line fatigue assessment due to non-Gaussian bimodal tension responses.Using time domain simulation as a benchmark,its accuracy is further validated using a numerical case study of a moored semi-submersible platform.展开更多
The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is tra...The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is transformed into another form and the corresponding theorem is proved, then its applicable range is extended. Compared with other algorithms on the integral processes, this algorithm is more practical and simple to implement. Simulation results also prove its validity. Applying this algorithm, we succeed in the control of the boiler level system in power units.展开更多
Non-parametric system identification with Gaussian processes for underwater vehicles is explored in this research with the purpose of modelling autonomous underwater vehicle(AUV) dynamics with a low amount of data. Mu...Non-parametric system identification with Gaussian processes for underwater vehicles is explored in this research with the purpose of modelling autonomous underwater vehicle(AUV) dynamics with a low amount of data. Multi-output Gaussian processes and their aptitude for modelling the dynamic system of an underactuated AUV without losing the relationships between tied outputs are used. The simulation of a first-principle model of a Remus 100 AUV is employed to capture data for the training and validation of the multi-output Gaussian processes. The metric and required procedure to carry out multi-output Gaussian processes for AUV with 6 degrees of freedom(DoF) is also shown in this paper. Multi-output Gaussian processes compared with the popular technique of recurrent neural network show that multi-output Gaussian processes manage to surpass RNN for non-parametric dynamic system identification in underwater vehicles with highly coupled DoF with the added benefit of providing the measurement of confidence.展开更多
Based on frequency response and convex optimization,a novel optimal control system was developed for chemical processes.The feedforward control is designed to improve the tracking performance of closed loop chemical s...Based on frequency response and convex optimization,a novel optimal control system was developed for chemical processes.The feedforward control is designed to improve the tracking performance of closed loop chemical systems.The parametric model is not required because the system directly utilizes the frequency response of the loop transfer function,which can be measured accurately.In particular,the extremal values of magnitude and phase can be solved according to constrained quadratic programming optimizer and convex optimization.Simulation examples show the effectiveness of the method.The design method is simple and easily adopted in chemical industry.展开更多
基金supported by the National Natural Science Foundation of China(Nos.42007178 and 41907327)the Natural Science Foundation of Hubei(Nos.2020CFB463 and 2019CFB372)+4 种基金China Geological Survey(Nos.DD20160304 and DD20190824)Fundamental Research Funds for the Central Universities(Nos.CUG 190644 and CUGL180817)National Key Research and Development Program(No.2019YFC1805502)Key Laboratory of Karst Dynamics,MNR and GZAR(Institute of Karst Geology,CAGS)Guilin(No.KDL201703)Key Laboratory of Karst Ecosystem and Treatment of Rocky Desertification,MNR and IRCK by UNESCO(No.KDL201903)。
文摘To investigate groundwater flow and solute transport characteristics of the karst trough zone in China,tracer experiments were conducted at two adjacent typical karst groundwater flow systems(Yuquandong(YQD)and Migongquan(MGQ))in Sixi valley,western Hubei,China.Highresolution continuous monitoring was utilized to obtain breakthrough curves(BTCs),which were then analyzed using the multi-dispersion model(MDM)and the two-region nonequilibrium model(2RNE)with basic parameters calculated by CXTFIT and QTRACER2.Results showed that:(1)YQD flow system had a complex infiltration matrix with overland flow,conduit flow and fracture flow,while the MGQ flow system was dominated by conduit flow with fast flow transport velocity,but also small amount of fracture flow there;(2)They were well fitted based on the MDM(R^2=0.928)and 2RNE(R^2=0.947)models,indicating that they had strong adaptability in the karst trough zone;(3)conceptual models for YQD and MGQ groundwater systems were generalized.In YQD system,the solute was transported via overland flow during intense rainfall,while some infiltrated down into fissures and conduits.In MGQ system,most were directly transported to spring outlet in the fissureconduit network.
文摘Erratum to:International Journal of Minerals,Metallurgy and Materials Volume 31,Number 1,January 2024,Page 186 https://doi.org/10.1007/s12613-023-2744-0 The original version of this article unfortunately contained three mistakes.The presentation of Fig.8 in original version was incorrect.The correct version is given below.
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
基金supported by the National Key R&D Program of China(No.2023YFC3210100).
文摘Vacuum-ultraviolet(VUV)radiation is high-energy UV radiation with a wavelength of 100-200 nm capable of decomposing/mineralizing hazardous emerging organic pollutants(EPs)in water through direct photolysis and/or by generating reactive free radicals(RFRs)during photolysis.However,due to the unsatisfactory photoelectric conversion rate,strong absorption by oxygen and water molecules,and other characteristics of VUV radiation,its application and development are hindered,leading to misconceptions regarding high energy consumption and insufficient free radical yield.The objectives of our assessment in this review are as follows:The illumination of the photochemical characteristics of VUV and the reactivity of aqueous solutions.Summarization of accurate UV dose and energy evaluation criteria.Comparison and analysis of the photochemical mechanisms and reaction kinetics of different types of EPs via VUV direct photolysis,as well as the interference origins of typical substrates in water for VUV decontamination.We found that quantities typically reported in VUV photochemical reactions of engineered systems are underreported in low-pressure mercury lamp(LPUV)photochemical reactions,especially a quantitative indicator of the species or energy that induces a chemical reaction.The absence of these quantities has made it difficult to assess the fundamental performance of VUV photolysis fully compared with that of UV-C.Some studies have sought to optimize VUV-advanced reduction processes(VUV-ARP)or VUV reactor treatment of these contaminants;however,an abundant evaluation of the reaction origins and processes between VUV-derived main RFRs and reactants(H_(2)O,O_(2),organic matter,inorganic ions,etc.)is essential,cause these scientific elements will provide the possibility to break the application gap for VUV in the field of EPs treating.Overall,the data compilation,analysis,and research recommendations provided in this review will form the basis for all photochemical reactions initiated by VUV radiation with water as the backing agent.
基金support from the National Natural Science Foundation of China(Grant Nos.42277161 and 42230709).
文摘In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.
基金supported by the Japan Society for the Promotion of Science(JSPS)Grants-in-Aid for Scientific Research(C)23K03898.
文摘Traffic at urban intersections frequently encounters unexpected obstructions,resulting in congestion due to uncooperative and priority-based driving behavior.This paper presents an optimal right-turn coordination system for Connected and Automated Vehicles(CAVs)at single-lane intersections,particularly in the context of left-hand side driving on roads.The goal is to facilitate smooth right turns for certain vehicles without creating bottlenecks.We consider that all approaching vehicles share relevant information through vehicular communications.The Intersection Coordination Unit(ICU)processes this information and communicates the optimal crossing or turning times to the vehicles.The primary objective of this coordination is to minimize overall traffic delays,which also helps improve the fuel consumption of vehicles.By considering information from upcoming vehicles at the intersection,the coordination system solves an optimization problem to determine the best timing for executing right turns,ultimately minimizing the total delay for all vehicles.The proposed coordination system is evaluated at a typical urban intersection,and its performance is compared to traditional traffic systems.Numerical simulation results indicate that the proposed coordination system significantly enhances the average traffic speed and fuel consumption compared to the traditional traffic system in various scenarios.
基金support of the Korea Institute of Industrial Technol-ogy as“Development of a remote manufacturing system for high-risk,high-difficulty pipe production processes”(kitech EH-25-0004)supported by the Technology Innovation Program(or Industrial Strategic Technology Development Program)(RS-2023–00237714+2 种基金Development of Dynamic Metrology Tool for CMP Process StabilizationRS-2025–02634755Development of Real-Time Electrical Fire Prevention System Technology Reflecting the Characteristics of Traditional Markets)funded by the Ministry of Trade,Industry&Energy(MOTIE,Republic of Korea).
文摘The composite material layering process has attracted considerable attention due to its production advantages,including high scalability and compatibility with a wide range of raw materials.However,changes in process conditions can lead to degradation in layer quality and non-uniformity,highlighting the need for real-time monitoring to improve overall quality and efficiency.In this study,an AI-based monitoring system was developed to evaluate layer width and assess quality in real time.Three deep learning models Faster Region-based Convolutional Neural Network(R-CNN),You Only Look Once version 8(YOLOv8),and Single Shot MultiBox Detector(SSD)were compared,and YOLOv8 was ultimately selected for its superior speed,flexibility,and scalability.The selected model was integrated into a user-friendly interface.To verify the reliability of the system,bead width control experiments were conducted,which identified feed speed and extrusion speed as the key process parameters.Accordingly,a Central Composite Design(CCD)experimental plan with 13 conditions was applied to evaluate layer width and validate the system’s reliability.Finally,the proposed system was applied to the additive manufacturing of an aerospace component,where it successfully detected bead width deviations during printing and enabled stable fabrication with a maximum geometric deviation of approximately 6 mm.These findings demonstrate the critical role of real-time monitoring of layer width and quality in improving process stability and final product quality in composite material additive manufacturing.
基金Project supported by the Natural Science Foundation of Jiangsu Province (No.JSNSF 20050307)the National Natural Science Foundation of China (No.NSFC 30470326).
文摘Spartina alterniflora Loisel, a species vegetating in intertidal flats along the eastern coast of the United States, was introduced in China almost 30 years ago and has become an urgent topic due to its invasiveness in the coastal zone of China. The impacts of this alien species S. alterniflora on intertidal ecosystem processes in the Jiangsu coastland were investigated by comparing the sediment nutrient availability and trace element concentration characteristics in a mud flat and those of a four-year old Spartina salt marsh that had earlier been a mudflat. At each study site, fifteen plots were sampled in different seasons to determine the sediment characteristics along the tidal flats. The results suggested that Spartina salt marsh sediments had significantly higher total N, available P, and water content, but lower pH and bulk density than mudflat sediments. Sediment salinity, water content, total N, organic C, and available P decreased along a seaward gradient in the Spartina salt marsh and increased with vegetation biomass. Furthermore, the concentrations of trace elements and some metal elements in the sediment were higher under Spartina although these increases were not significant. Also, in the Spartina marsh, some heavy metals were concentrated in the surface layer of the sediment. The Spartina salt marsh in this study was only four years old; therefore, it is suggested that further study of this allen species on a longer time frame in the Jiangsu coastland should be carried out.
基金partly supportedby National Natural Science Foundation of China(Grant No.41472103)
文摘Recent studies, focused on dihedral angles and intersection processes, have increased understandings of conjugate fault mechanisms. We present new 3-D seismic data and microstructural core analysis in a case study of a large conjugate strike-slip fault system from the intracratonic Tarim Basin, NW China. Within our study area, ＂X＂ type NE and NW trending faults occur within Cambrian- Ordovician carbonates. The dihedral angles of these conjugate faults have narrow ranges, 19~ to 62~ in the Cambrian and 26~ to 51~ in the Ordovician, and their modes are 42~ and 44~ respectively. These data are significantly different from the ~60~ predicted by the Coulomb fracture criterion. It is concluded that： （1） The dihedral angles of the conjugate faults were not controlled by confining pressure, which was low and associated with shallow burial; （2） As dihedral angles were not controlled by pressure they can be used to determine the shortening direction during faulting; （3） Sequential slip may have played an important role in forming conjugate fault intersections; （4） The conjugate fault system of the Tarim basin initiated as rhombic joints; these subsequently developed into sequentially active ＂X＂ type conjugate faults; followed by preferential development of the NW-trending faults; then reactivation of the NE trending faults. This intact rhombic conjugate fault system presents new insights into mechanisms of dihedral angle development, with particular relevance to intracratonic basins.
基金the National Natural Science Foundation of China(grant no.:41430532)the Alexander von Humboldt Stiftung/Foundation,Germany for support
文摘Due to large deserts on Earth surface a thorough understanding of climate change, landscape evolution and geomorphological processes having occurred in deserts is crucial for Earth System Science. The landscapes in deserts are, however, diverse and different over the globe with regard to their geomorphological nature, human activities and geological histories. In the last decades a great number of efforts have been put to the investigation of the initial timing of the occurrence of arid climate, e. g. in northwestern China. Silty sediments in the downwind directions have been used to deduce the histories of deserts. In general, there is a lack of knowledge about processes and landscapes in Chinese drylands between the initial Miocene silt sedimentation at desert margins and the late Quaternary multiple occurrences of wetter climate with assumed large lakes in many of the deserts in northern China. The geomorphological concept of three primary triggering factors, i.e., the sediment supply, sediment availability and transport capacity of wind, and additionally the underground geology need to be fully considered for a better understanding of the environmental histories of sand seas which should not be viewed as equivalent for deserts because sand seas cover between 〈 1% and ca. 45% of the desert areas in various continents dependent on a complex interaction between various processes of both exogenous and endogenous origins.
基金supported by the National Key Research and Development Program of China(No.2018YFC0213500)the National Key Research and Development Program of China(No.2017YFC0213003).
文摘Beijing faces the challenge of high levels of ozone(O_(3))pollution.In this study,the Weather Research and Forecasting model and Community Multiscale Air Qualitymodel(CMAQ)were used to simulate atmospheric O_(3) concentrations in Beijing.To investigate the formation mechanisms and source contributions of O_(3) pollution in different regions of Beijing,process analysis and the integrated source apportionmentmethodwithin the CMAQwere applied to O_(3) concentrations in the summer of 2018.The process analysis results showed that vertical diffusion was the major contributor to O_(3) concentrations at all receptor sites in Beijing,at>65.94μg/(m^(3)·hr).Gas-phase chemical reactions consumed a significant amount of O_(3) in urban and inner suburban areas(>−5.57μg/(m^(3)·hr)),while near-surface chemical reactions made positive contributions in outer suburban areas(>4.72μg/(m^(3)·hr)).The O_(3) formation chemical reactions indicated that NO titration,which removes O_(3) at night-time,mainly occurred in urban areas.The weaker chemical reactions occurring near the surface in outer suburbs suggested that suburban-area O_(3) was produced in the upper atmospheric layers and was transported vertically to the lower layers.The O_(3) source apportionment results showed that boundary contributions were the dominant contributor to O_(3) pollution in Beijing(>40%).The contribution of non-local emissions to O_(3) levels was significantly greater in the outer suburbs than in urban and inner suburban areas due to topography.This study increases the understanding of the complex processes of O_(3) formation in different areas of Beijing and informs the implementation of O_(3) control plans.
基金founded by The National Science Foundation of China(No.40730634 andNo.40925002)
文摘In this study,effects of elevated air temperatures on thermal and hydrologic process of the shallow soil in the active layer were investigated. Open-top chambers(OTCs)were utilized to increase air temperatures 1-2℃ in OTC-1 and 3-5℃ in OTC-2 in the alpine meadow ecosystem on the Qinghai- Tibetan Plateau.Results show that the annual air temperatures under OTC-1 and OTC-2 were 1.21℃ and 3.62℃ higher than the Control,respectively.The entirely-frozen period of shallow soil in the active layer was shortened and the fully thawed period was prolonged with temperature increase.The maximum penetration depth and duration of the negative isotherm during the entirely-frozen period decreased, and soil freezing was retarded in the local scope of the soil profile when temperature increased.Meanwhile, the positive isotherm during the fully-thawed period increased,and the soil thawing was accelerated.Soil moisture under different manipulations decreased with the temperature increase at the same depth. During the early freezing period and the early fully- thawed period,the maximum soil moisture under the Control manipulation was at 0.2 m deep,whereas under OTC-1 and OTC-2 manipulations,the maximum soil moisture were at 0.4-0.5 m deep. These results indicate that elevated temperatures led to a decrease of the moisture in the surface soil.The coupled relationship between soil temperature and moisture was significantly affected by the temperature increase.During the freezing and thawing processes, the soil temperature and moisture under different manipulations fit the regression model given by the equationθV=a/{1+exp[b(TS+c)]}+d.
基金supported by the National Natural Science Foundation of China (Grant Nos.41730965, U2242204, and 41175047)the National Key Basic Research and Development Project of China (Grant No.2013CB430104)+2 种基金the Key Project of the Joint Funds of the Natural Science Foundation of Zhejiang Province (Grant No.LZJMZ23D050003financial support from the China Scholarship Council for her visit to CAPSUniversity of Oklahoma
文摘An extreme rainfall event occurred over Hangzhou,China,during the afternoon hours on 24 June 2013.This event occurred under suitable synoptic conditions and the maximum 4-h cumulative rainfall amount was over 150 mm.This rainfall event had two major rainbands.One was caused by a quasi-stationary convective line,and the other by a backbuilding convective line related to the interaction of the outflow boundary from the first rainband and an existing low-level mesoscale convergence line associated with a mei-yu frontal system.The rainfall event lasted 4 h,while the back-building process occurred in 2 h when the extreme rainfall center formed.So far,few studies have examined the back-building processes in the mei-yu season that are caused by the interaction of a mesoscale convergence line and a convective cold pool.The two rainbands are successfully reproduced by the Weather Research and Forecasting(WRF)model with fourlevel,two-way interactive nesting.In the model,new cells repeatedly occur at the west side of older cells,and the backbuilding process occurs in an environment with large CAPE,a low LFC,and plenty of water vapor.Outflows from older cells enhance the low-level convergence that forces new cells.High precipitation efficiency of the back-building training cells leads to accumulated precipitation of over 150 mm.Sensitivity experiments without evaporation of rainwater show that the convective cold pool plays an important role in the organization of the back-building process in the current extreme precipitation case.
文摘A real-time pricing system of electricity is a system that charges different electricity prices for different hours of the day and for different days, and is effective for reducing the peak and flattening the load curve. In this paper, using a Markov decision process (MDP), we propose a modeling method and an optimal control method for real-time pricing systems. First, the outline of real-time pricing systems is explained. Next, a model of a set of customers is derived as a multi-agent MDP. Furthermore, the optimal control problem is formulated, and is reduced to a quadratic programming problem. Finally, a numerical simulation is presented.
基金supported by National Natural Science Foundation of China(Nos.61273070 and 61203092)111 project(No.B12018)
文摘This paper addresses the problem of robust iterative learning control design for a class of uncertain multiple-input multipleoutput discrete linear systems with actuator faults. The stability theory for linear repetitive processes is used to develop formulas for gain matrices design, together with convergent conditions in terms of linear matrix inequalities. An extension to deal with model uncertainty of the polytopic or norm bounded form is also developed and an illustrative example is given.
基金supported by the National Natural Science Foundation of China (Grant no. 40930848)the Norwegian Research Council (AMORA, 193592/S30)+1 种基金the China Postdoctoral Science Foundation (Grant no. 20100470400)the International Cooperation Project of the Chinese Arctic and Antarctic Administration, SOA (Grant no. IC2010007)
文摘Thermodynamic processes of a system involving a floe and a small lead in the central Arctic were investigated during the ice-camp period of the third Chinese National Arctic Research Expedition from 20 to 28 August, 2008. The measurements included surface air temperatures above the floe, spectral albedo of the lead, seawater temperatures in the lead and under the ice cover, and the lateral and bottom mass balance of the floe. The surface air temperature at 1.15 m remained below 0~Cthroughout the observation period and sea ice had commenced its annual cycle of growth in response to autumn cooling during the study. The surface of the lead was frozen by 23 August, after which the spectral albedo of the thin-ice-covered lead in the band of 320-950 nm was 0.46 -0.03, the seawater temperatures both in the lead and under the ice cover, as well as the vertical seawater-temperature gradient in the lead decreased gradually, and the oceanic heat under the ice was maintained at a low level approaching 0 W/m2. By the end of the measurement, the thickness of the investigated floe had reached its annual minimum, while the lateral of the floe was still in the melting phase, with a mean melting rate of 1.0±0.3 cm/d during the measurement, responding to an equivalent latent heat flux of 21 ±6 W/m2. The lateral melting of the floe had made a more significant contribution to the sea-ice mass balance than the surface and bottom melting in the end of August.
基金the financial support of the Major Program of the National Natural Science Foundation of China(No.51490675)the National Science Fund for Distinguished Young Scholars(No.51625902)+1 种基金the Taishan Scholars Program of Shandong Provincethe Fundamental Research Funds for the Central Universities(No.841713035)
文摘Both wave-frequency(WF) and low-frequency(LF) components of mooring tension are in principle non-Gaussian due to nonlinearities in the dynamic system.This paper conducts a comprehensive investigation of applicable probability density functions(PDFs) of mooring tension amplitudes used to assess mooring-line fatigue damage via the spectral method.Short-term statistical characteristics of mooring-line tension responses are firstly investigated,in which the discrepancy arising from Gaussian approximation is revealed by comparing kurtosis and skewness coefficients.Several distribution functions based on present analytical spectral methods are selected to express the statistical distribution of the mooring-line tension amplitudes.Results indicate that the Gamma-type distribution and a linear combination of Dirlik and Tovo-Benasciutti formulas are suitable for separate WF and LF mooring tension components.A novel parametric method based on nonlinear transformations and stochastic optimization is then proposed to increase the effectiveness of mooring-line fatigue assessment due to non-Gaussian bimodal tension responses.Using time domain simulation as a benchmark,its accuracy is further validated using a numerical case study of a moored semi-submersible platform.
文摘The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is transformed into another form and the corresponding theorem is proved, then its applicable range is extended. Compared with other algorithms on the integral processes, this algorithm is more practical and simple to implement. Simulation results also prove its validity. Applying this algorithm, we succeed in the control of the boiler level system in power units.
文摘Non-parametric system identification with Gaussian processes for underwater vehicles is explored in this research with the purpose of modelling autonomous underwater vehicle(AUV) dynamics with a low amount of data. Multi-output Gaussian processes and their aptitude for modelling the dynamic system of an underactuated AUV without losing the relationships between tied outputs are used. The simulation of a first-principle model of a Remus 100 AUV is employed to capture data for the training and validation of the multi-output Gaussian processes. The metric and required procedure to carry out multi-output Gaussian processes for AUV with 6 degrees of freedom(DoF) is also shown in this paper. Multi-output Gaussian processes compared with the popular technique of recurrent neural network show that multi-output Gaussian processes manage to surpass RNN for non-parametric dynamic system identification in underwater vehicles with highly coupled DoF with the added benefit of providing the measurement of confidence.
基金Supported by the National Natural Science Foundation of China（51205133） Natural Science Foundation of Shanghai（11ZR1409000） Ph.D.Programs Foundation of Ministry of Education of China（20110074120007）
文摘Based on frequency response and convex optimization,a novel optimal control system was developed for chemical processes.The feedforward control is designed to improve the tracking performance of closed loop chemical systems.The parametric model is not required because the system directly utilizes the frequency response of the loop transfer function,which can be measured accurately.In particular,the extremal values of magnitude and phase can be solved according to constrained quadratic programming optimizer and convex optimization.Simulation examples show the effectiveness of the method.The design method is simple and easily adopted in chemical industry.
