[Objective] The research aimed to study the yield prediction model of processing tomato based on the grey system theory.[Method] The variation trend of processing tomato yield was studied by using the grey system theo...[Objective] The research aimed to study the yield prediction model of processing tomato based on the grey system theory.[Method] The variation trend of processing tomato yield was studied by using the grey system theory,and GM（1,1）grey model of processing tomato yield prediction was established.The processing tomato yield in Xinjiang during 2001-2009 was as the example to carry out the instance analysis.[Result] The model had the high forecast accuracy and strong generalization ability,and was reliable for the prediction of recent processing tomato yield.[Conclusion] The research provided the reference for the macro-control of tomato industry,the processing and storage of tomato in Xinjiang.展开更多
The effects of nitrogen on grain yield, nutritional quality and processing quality of wheat for different end uses were studied in Yangzhou from 2000 to 2002. Increasing N application amount and/or the ratio of topdre...The effects of nitrogen on grain yield, nutritional quality and processing quality of wheat for different end uses were studied in Yangzhou from 2000 to 2002. Increasing N application amount and/or the ratio of topdressing N after elongation stage could raise grain yield, protein content, wet gluten content, sedimentation, falling number, development time and stability time. To produce strong-gluten and medium-gluten wheat, the suitable ratio of basis : tillering : elongation : booting N fertilizer was 3:1:3:3or5:1:2:2 with 180 - 240 kg N ha-1. To produce weak-gluten wheat, the ratio of basis : tillering : elongation N fertilizer should be 7 : 1 : 2 with 180 kg N ha-1 and 240×104 ha-1 seedlings.展开更多
Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd...Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd the larger process capability index also indicates the lower process expected loss. Chen et al. (2001) has applied indices C pu, C pl, and C pk for evaluating the process capability for a multi-process product wi th smaller-the-better, larger-the-better, and nominal-the-best specificati ons respectively. However, C pk cannot reasonably reflect the process expected loss. In this paper, index C pn is selected to replace C pk. Indices C pu, C pl, and C pn are used to evalu ate the entire process capability for a multi-process product with smaller-the -better, larger-the-better, and nominal-the-best specifications respectivel y. An integrated process capability index for a multi-process product is propo sed. The relationship between process capability index and the process yield is introduced. A multi-process capability analysis chart (MPCAC), reasonably rev ealing the status of process capability for the entire product, is constructed f or practical application. An evaluating procedure of the process capability for the entire product is also provided.展开更多
Rare earths(REs) are of vital importance for the development of new materials and green energy.Magnesium bicarbonate is one of the most recyclable and environmental-friendly precipitant for REs recovery from leaching ...Rare earths(REs) are of vital importance for the development of new materials and green energy.Magnesium bicarbonate is one of the most recyclable and environmental-friendly precipitant for REs recovery from leaching solutions. Nd_2(CO_3)_3 has difficulties in industrial production. So in this study,the precipitation of neodymium from chloride solution by magnesium bicarbonate are investigated. The effects of feeding method, [HCO_3^-]/[Nd^(3+)] mole ratio, feeding speed and reaction temperature on yield and impurity(magnesia) content are systematically studied. Results show that the impurity(magnesia)content decreases to 0.010 wt% with a yield approaching to 100% obtained under the conditions of[HCO_3^-]/[Nd^(3+)] = 3.00 by parallel flow addition at 50 ℃. The major impurity(magnesia) in rare earth carbonates mainly presents in the form of physical absorption, which can be easily removed by scrubbing. Therefore, it offers a promising green process that uses magnesium bicarbonate to produce neodymium carbonate due to its cycling of carbon dioxide, magnesium salt and waste water.展开更多
Sustainable irrigation method is now essential for adaptation and adoption in the areas where water resources are limited. Therefore, a field experiment was conducted to test the performance of alternate wetting and d...Sustainable irrigation method is now essential for adaptation and adoption in the areas where water resources are limited. Therefore, a field experiment was conducted to test the performance of alternate wetting and drying furrow irrigation（AWDFI） on crop growth, yield, water use efficiency（WUE）, fruit quality and profitability analysis of tomato. The experiment was laid out in randomized complete block design with six treatments replicated thrice during the dry seasons of 2013-2014 and 2014-2015. Irrigation water was applied through three ways of furrow： AWDFI, fixed wetting and drying furrow irrigation（FWDFI） and traditional（every） furrow irrigation（TFI）. Each irrigation method was divided into two levels： irrigation up to 100 and 80% field capacity（FC）. Results showed that plant biomass（dry matter） and marketable fruit yield of tomato did not differ significantly between the treatments of AWDFI and TFI, but significant difference was observed in AWDFI and in TFI compared to FWDFI at same irrigation level. AWDFI saved irrigation water by 35 to 38% for the irrigation levels up to 80 and 100% FC, compared to the TFI, respectively. AWDFI improved WUE by around 37 to 40% compared to TFI when irrigated with 100 and 80% FC, respectively. Fruit quality（total soluble solids and pulp） was found greater in AWDFI than in TFI. Net return from AWDFI technique was found nearly similar compared to TFI and more than FWDFI. The benefit cost ratio was viewed higher in AWDFI than in TFI and FWDFI by 2.8, 8.7 and 11, 10.4% when irrigation water was applied up to 100 and 80% FC, respectively. Unit production cost was obtained lower in AWDFI compared to TFI and FWDFI. However, AWDFI is a useful water-saving furrow irrigation technique which may resolve as an alternative choice compared with TFI in the areas where available water and supply methods are limited to irrigation.展开更多
Maize(Zea mays L.) stands prominently as one of the major cereal crops in China as well as in the rest of the world.Therefore,predicting the growth and yield of maize for large areas through yield components under hig...Maize(Zea mays L.) stands prominently as one of the major cereal crops in China as well as in the rest of the world.Therefore,predicting the growth and yield of maize for large areas through yield components under high-yielding environments will help in understanding the process of yield formation and yield potential under different environmental conditions.This accurate early assessment of yield requires accuracy in the formation process of yield components as well.In order to formulate the quantitative design for high yields of maize in China,yield performance parameters of quantitative design for high grain yields were evaluated in this study,by utilizing the yield performance equation with normalization of planting density.Planting density was evaluated by parameters including the maximum leaf area index and the maximum leaf area per plant.Results showed that the variation of the maximum leaf area per plant with varying plant density conformed to the Reciprocal Model,which proved to have excellent prediction with root mean square error(RMSE) value of 5.95%.Yield model estimation depicted that the best optimal maximum leaf area per plant was 0.63 times the potential maximum leaf area per plant of hybrids.Yield performance parameters for different yield levels were quantitatively designed based on the yield performance equation.Through validation of the yield performance model by simulating high yields of spring maize in the Inner Mongolia Autonomous Region and Jilin Province,China,and summer maize in Shandong Province,the yield performance equation showed excellent prediction with the satisfactory mean RMSE value(7.72%) of all the parameters.The present study provides theoretical support for the formulation of quantitative design for sustainable high yield of maize in China,through consideration of planting density normalization in the yield prediction process,providing there is no water and nutrient limitation.展开更多
A crop growth model of WOFOST was calibrated and validated through rice field experiments from 2001 to 2004 in Jinhua and Hangzhou, Zhejiang Province. For late rice variety Xiushui 11 and hybrid Xieyou 46, the model w...A crop growth model of WOFOST was calibrated and validated through rice field experiments from 2001 to 2004 in Jinhua and Hangzhou, Zhejiang Province. For late rice variety Xiushui 11 and hybrid Xieyou 46, the model was calibrated to obtain parameter values using the experimental data of years 2001 and 2002, then the parameters were validated by the data obtained during 2003. For single hybrid rice Liangyoupeijiu, the data recorded in 2004 and 2003 were used for calibration and validation, respectively. The main focus of the study was as follows： the WOFOST model is good in simulating rice potential growth in Zhejiang and can be used to analyze the process of rice growth and yield potential. The potential yield obtained from the WOFOST model was about 8100 kg/ha for late rice and 9300 kg/ha for single rice. The current average yield in Jinhua is only about 78% （late rice） and 70% （single rice） of their potential yield. The results of the simulation also showed that the currant practice of management at the middle and late growth stages of rice should be reexamined and improved to reach optimal rice growth.展开更多
Watershed is considered to be the ideal unit for management of the natural resources. Extraction of water-shed parameters using Remote Sensing and Geographical Information System (GIS) and use of mathematical models i...Watershed is considered to be the ideal unit for management of the natural resources. Extraction of water-shed parameters using Remote Sensing and Geographical Information System (GIS) and use of mathematical models is the current trend for hydrologic evaluation of watersheds. The Soil and Water Assessment Tool (SWAT) having an interface with ArcView GIS software (AVSWAT2000/X) was selected for the estimation of runoff and sediment yield from an area of Suni to Kasol, an intermediate watershed of Satluj river, located in Western Himalayan region. The model was calibrated for the years 1993 & 1994 and validated with the observed runoff and sediment yield for the years 1995, 1996 and 1997. The performance of the model was evaluated using statistical and graphical methods to assess the capability of the model in simulating the run-off and sediment yield from the study area. The coefficient of determination (R2) for the daily and monthly runoff was obtained as 0.53 and 0.90 respectively for the calibration period and 0.33 and 0.62 respectively for the validation period. The R2 value in estimating the daily and monthly sediment yield during calibration was computed as 0.33 and 0.38 respectively. The R2 for daily and monthly sediment yield values for 1995 to 1997 was observed to be 0.26 and 0.47.展开更多
In recent years, there has been mounting interest i n measuring process performance in manufacturing industry. Based on analyzing the process capability indices, a production department can trace and improve a poor pr...In recent years, there has been mounting interest i n measuring process performance in manufacturing industry. Based on analyzing the process capability indices, a production department can trace and improve a poor process to enhance quality levels and satisfy customers. The process capabilit y analysis can also serve as an important reference for making decisions for imp roving the global quality of all products. Since C p and C pk are failed to account for process centering, the index C pm is developed. The index C pm takes the process centering into consideration and is su itable for the processes with nominal-the-best type. There are other indices l ike C pu and C pl, and those indices are used for unilateral s pecification processes. Chou (1994) developed a procedure using estimators of C p, C pu and C pl for practitioners to determine whether two p rocesses are equal capability or not. For bilateral specifications processes, i ndex C p is failed to measure process yield and process centering. Thus, th e index C pm is used to develop a similar procedure for practitioners t o determine whether two processes are equal capability or not. The decisions mad e using the procedure to select the better supplier are, of course, more reliabl e.展开更多
A study on alkaline sulfite anthraquinone pulping of wheat straw indicated that the addition of formaldehyde could improve fine pulp yield effectively, enhance brightness of unbleached pulp, and decrease kappa number....A study on alkaline sulfite anthraquinone pulping of wheat straw indicated that the addition of formaldehyde could improve fine pulp yield effectively, enhance brightness of unbleached pulp, and decrease kappa number. Finally, the optimum conditions of this process were formed.展开更多
The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of s...The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ<sub>b</sub>, yield stress σ<sub>0.2</sub>, percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.展开更多
The paper is to study the TCF bleaching of high-yield chemical pulp of NS-AQ aspen(digester yield 63.7%, Kappa number 37.3, brightness 50.0%ISO, intrinsic viscosity 1,340ml/g). Under the suitable conditions(oxygen pre...The paper is to study the TCF bleaching of high-yield chemical pulp of NS-AQ aspen(digester yield 63.7%, Kappa number 37.3, brightness 50.0%ISO, intrinsic viscosity 1,340ml/g). Under the suitable conditions(oxygen pressure 0.6MPa, 85℃, 80min., NaOH 5%, MgSO4 0.3%, consistency 11%), oxygen delignification, can increase the brightness of pulp to 64.9%ISO, substantially decrease Kappa number to 9.11. Before the oxygen delignification pretreating pulp by acidic chelant(Qa)under conditions of pH 3.0, 30min, 40℃, DTPA 0.25%, consistency 15%, and after the Qa strengthening oxygen delignification by H2O2(Op, H2O2 2%)can increase the brightness of pulp to 77.1%ISO, decrease Kappa number and intrinsic viscosity to 6.36 and 984ml/g, respectively. After the Op, pretreat pulp by chelant once again(pH 6.0, 60℃, consistency 12%, other as the Qa), and following this pretreatment do bleach with 1% H2O2, namely using Qa-Op-Q-P bleaching sequence, resulting in the brightness 84.8%ISO, Kappa number 5.01, intrinsic viscosity 792ml/g, total bleaching loss 12.17% for bleached pulp.展开更多
In this paper, the traditional empirical coefficient method and a novel loop material analytical method presented by the authors have been compared and discussed by analyzing several practical cylindrical workpieces’...In this paper, the traditional empirical coefficient method and a novel loop material analytical method presented by the authors have been compared and discussed by analyzing several practical cylindrical workpieces’ deep drawing projects. Also, some conclusions about how to modify the traditional analyzing method of cylindrical workpieces’ deep drawing process could be concluded and the necessity of this modification could be proved.展开更多
基金Supported by National Natural Science Fund Item(61064005)~~
文摘[Objective] The research aimed to study the yield prediction model of processing tomato based on the grey system theory.[Method] The variation trend of processing tomato yield was studied by using the grey system theory,and GM（1,1）grey model of processing tomato yield prediction was established.The processing tomato yield in Xinjiang during 2001-2009 was as the example to carry out the instance analysis.[Result] The model had the high forecast accuracy and strong generalization ability,and was reliable for the prediction of recent processing tomato yield.[Conclusion] The research provided the reference for the macro-control of tomato industry,the processing and storage of tomato in Xinjiang.
基金supported by the Nationa1 Natural Science Foundation of China(30170540)the Foundation for University Key Teacher by the Ministry of Education,China(GG-901-11117-1003).
文摘The effects of nitrogen on grain yield, nutritional quality and processing quality of wheat for different end uses were studied in Yangzhou from 2000 to 2002. Increasing N application amount and/or the ratio of topdressing N after elongation stage could raise grain yield, protein content, wet gluten content, sedimentation, falling number, development time and stability time. To produce strong-gluten and medium-gluten wheat, the suitable ratio of basis : tillering : elongation : booting N fertilizer was 3:1:3:3or5:1:2:2 with 180 - 240 kg N ha-1. To produce weak-gluten wheat, the ratio of basis : tillering : elongation N fertilizer should be 7 : 1 : 2 with 180 kg N ha-1 and 240×104 ha-1 seedlings.
文摘Process Capability Analysis (PCA) is a powerful too l to assess the ability of a process for manufacturing product that meets specific ations. The larger process capability index implies the higher process yield, a nd the larger process capability index also indicates the lower process expected loss. Chen et al. (2001) has applied indices C pu, C pl, and C pk for evaluating the process capability for a multi-process product wi th smaller-the-better, larger-the-better, and nominal-the-best specificati ons respectively. However, C pk cannot reasonably reflect the process expected loss. In this paper, index C pn is selected to replace C pk. Indices C pu, C pl, and C pn are used to evalu ate the entire process capability for a multi-process product with smaller-the -better, larger-the-better, and nominal-the-best specifications respectivel y. An integrated process capability index for a multi-process product is propo sed. The relationship between process capability index and the process yield is introduced. A multi-process capability analysis chart (MPCAC), reasonably rev ealing the status of process capability for the entire product, is constructed f or practical application. An evaluating procedure of the process capability for the entire product is also provided.
基金supported by National Science and Technology Support Program of China(2015BAB16B03)the National Natural Science Foundation of China(51504034,51674037)
文摘Rare earths(REs) are of vital importance for the development of new materials and green energy.Magnesium bicarbonate is one of the most recyclable and environmental-friendly precipitant for REs recovery from leaching solutions. Nd_2(CO_3)_3 has difficulties in industrial production. So in this study,the precipitation of neodymium from chloride solution by magnesium bicarbonate are investigated. The effects of feeding method, [HCO_3^-]/[Nd^(3+)] mole ratio, feeding speed and reaction temperature on yield and impurity(magnesia) content are systematically studied. Results show that the impurity(magnesia)content decreases to 0.010 wt% with a yield approaching to 100% obtained under the conditions of[HCO_3^-]/[Nd^(3+)] = 3.00 by parallel flow addition at 50 ℃. The major impurity(magnesia) in rare earth carbonates mainly presents in the form of physical absorption, which can be easily removed by scrubbing. Therefore, it offers a promising green process that uses magnesium bicarbonate to produce neodymium carbonate due to its cycling of carbon dioxide, magnesium salt and waste water.
基金Bangladesh Agricultural Research Institute (BARI), Ministry of Agriculture, Bangladesh for providing fund and facilities for sustainable irrigation and water management practices
文摘Sustainable irrigation method is now essential for adaptation and adoption in the areas where water resources are limited. Therefore, a field experiment was conducted to test the performance of alternate wetting and drying furrow irrigation（AWDFI） on crop growth, yield, water use efficiency（WUE）, fruit quality and profitability analysis of tomato. The experiment was laid out in randomized complete block design with six treatments replicated thrice during the dry seasons of 2013-2014 and 2014-2015. Irrigation water was applied through three ways of furrow： AWDFI, fixed wetting and drying furrow irrigation（FWDFI） and traditional（every） furrow irrigation（TFI）. Each irrigation method was divided into two levels： irrigation up to 100 and 80% field capacity（FC）. Results showed that plant biomass（dry matter） and marketable fruit yield of tomato did not differ significantly between the treatments of AWDFI and TFI, but significant difference was observed in AWDFI and in TFI compared to FWDFI at same irrigation level. AWDFI saved irrigation water by 35 to 38% for the irrigation levels up to 80 and 100% FC, compared to the TFI, respectively. AWDFI improved WUE by around 37 to 40% compared to TFI when irrigated with 100 and 80% FC, respectively. Fruit quality（total soluble solids and pulp） was found greater in AWDFI than in TFI. Net return from AWDFI technique was found nearly similar compared to TFI and more than FWDFI. The benefit cost ratio was viewed higher in AWDFI than in TFI and FWDFI by 2.8, 8.7 and 11, 10.4% when irrigation water was applied up to 100 and 80% FC, respectively. Unit production cost was obtained lower in AWDFI compared to TFI and FWDFI. However, AWDFI is a useful water-saving furrow irrigation technique which may resolve as an alternative choice compared with TFI in the areas where available water and supply methods are limited to irrigation.
基金supported by the National Key Research and Development Program of China(2018YFD020060 and 2017YFD0301307)the National Natural Science Foundation of China(31971851)the earmarked fund for China Agriculture Research System(CARS-02-12)
文摘Maize(Zea mays L.) stands prominently as one of the major cereal crops in China as well as in the rest of the world.Therefore,predicting the growth and yield of maize for large areas through yield components under high-yielding environments will help in understanding the process of yield formation and yield potential under different environmental conditions.This accurate early assessment of yield requires accuracy in the formation process of yield components as well.In order to formulate the quantitative design for high yields of maize in China,yield performance parameters of quantitative design for high grain yields were evaluated in this study,by utilizing the yield performance equation with normalization of planting density.Planting density was evaluated by parameters including the maximum leaf area index and the maximum leaf area per plant.Results showed that the variation of the maximum leaf area per plant with varying plant density conformed to the Reciprocal Model,which proved to have excellent prediction with root mean square error(RMSE) value of 5.95%.Yield model estimation depicted that the best optimal maximum leaf area per plant was 0.63 times the potential maximum leaf area per plant of hybrids.Yield performance parameters for different yield levels were quantitatively designed based on the yield performance equation.Through validation of the yield performance model by simulating high yields of spring maize in the Inner Mongolia Autonomous Region and Jilin Province,China,and summer maize in Shandong Province,the yield performance equation showed excellent prediction with the satisfactory mean RMSE value(7.72%) of all the parameters.The present study provides theoretical support for the formulation of quantitative design for sustainable high yield of maize in China,through consideration of planting density normalization in the yield prediction process,providing there is no water and nutrient limitation.
文摘A crop growth model of WOFOST was calibrated and validated through rice field experiments from 2001 to 2004 in Jinhua and Hangzhou, Zhejiang Province. For late rice variety Xiushui 11 and hybrid Xieyou 46, the model was calibrated to obtain parameter values using the experimental data of years 2001 and 2002, then the parameters were validated by the data obtained during 2003. For single hybrid rice Liangyoupeijiu, the data recorded in 2004 and 2003 were used for calibration and validation, respectively. The main focus of the study was as follows： the WOFOST model is good in simulating rice potential growth in Zhejiang and can be used to analyze the process of rice growth and yield potential. The potential yield obtained from the WOFOST model was about 8100 kg/ha for late rice and 9300 kg/ha for single rice. The current average yield in Jinhua is only about 78% （late rice） and 70% （single rice） of their potential yield. The results of the simulation also showed that the currant practice of management at the middle and late growth stages of rice should be reexamined and improved to reach optimal rice growth.
文摘Watershed is considered to be the ideal unit for management of the natural resources. Extraction of water-shed parameters using Remote Sensing and Geographical Information System (GIS) and use of mathematical models is the current trend for hydrologic evaluation of watersheds. The Soil and Water Assessment Tool (SWAT) having an interface with ArcView GIS software (AVSWAT2000/X) was selected for the estimation of runoff and sediment yield from an area of Suni to Kasol, an intermediate watershed of Satluj river, located in Western Himalayan region. The model was calibrated for the years 1993 & 1994 and validated with the observed runoff and sediment yield for the years 1995, 1996 and 1997. The performance of the model was evaluated using statistical and graphical methods to assess the capability of the model in simulating the run-off and sediment yield from the study area. The coefficient of determination (R2) for the daily and monthly runoff was obtained as 0.53 and 0.90 respectively for the calibration period and 0.33 and 0.62 respectively for the validation period. The R2 value in estimating the daily and monthly sediment yield during calibration was computed as 0.33 and 0.38 respectively. The R2 for daily and monthly sediment yield values for 1995 to 1997 was observed to be 0.26 and 0.47.
文摘In recent years, there has been mounting interest i n measuring process performance in manufacturing industry. Based on analyzing the process capability indices, a production department can trace and improve a poor process to enhance quality levels and satisfy customers. The process capabilit y analysis can also serve as an important reference for making decisions for imp roving the global quality of all products. Since C p and C pk are failed to account for process centering, the index C pm is developed. The index C pm takes the process centering into consideration and is su itable for the processes with nominal-the-best type. There are other indices l ike C pu and C pl, and those indices are used for unilateral s pecification processes. Chou (1994) developed a procedure using estimators of C p, C pu and C pl for practitioners to determine whether two p rocesses are equal capability or not. For bilateral specifications processes, i ndex C p is failed to measure process yield and process centering. Thus, th e index C pm is used to develop a similar procedure for practitioners t o determine whether two processes are equal capability or not. The decisions mad e using the procedure to select the better supplier are, of course, more reliabl e.
文摘A study on alkaline sulfite anthraquinone pulping of wheat straw indicated that the addition of formaldehyde could improve fine pulp yield effectively, enhance brightness of unbleached pulp, and decrease kappa number. Finally, the optimum conditions of this process were formed.
文摘The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ<sub>b</sub>, yield stress σ<sub>0.2</sub>, percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.
文摘The paper is to study the TCF bleaching of high-yield chemical pulp of NS-AQ aspen(digester yield 63.7%, Kappa number 37.3, brightness 50.0%ISO, intrinsic viscosity 1,340ml/g). Under the suitable conditions(oxygen pressure 0.6MPa, 85℃, 80min., NaOH 5%, MgSO4 0.3%, consistency 11%), oxygen delignification, can increase the brightness of pulp to 64.9%ISO, substantially decrease Kappa number to 9.11. Before the oxygen delignification pretreating pulp by acidic chelant(Qa)under conditions of pH 3.0, 30min, 40℃, DTPA 0.25%, consistency 15%, and after the Qa strengthening oxygen delignification by H2O2(Op, H2O2 2%)can increase the brightness of pulp to 77.1%ISO, decrease Kappa number and intrinsic viscosity to 6.36 and 984ml/g, respectively. After the Op, pretreat pulp by chelant once again(pH 6.0, 60℃, consistency 12%, other as the Qa), and following this pretreatment do bleach with 1% H2O2, namely using Qa-Op-Q-P bleaching sequence, resulting in the brightness 84.8%ISO, Kappa number 5.01, intrinsic viscosity 792ml/g, total bleaching loss 12.17% for bleached pulp.
文摘In this paper, the traditional empirical coefficient method and a novel loop material analytical method presented by the authors have been compared and discussed by analyzing several practical cylindrical workpieces’ deep drawing projects. Also, some conclusions about how to modify the traditional analyzing method of cylindrical workpieces’ deep drawing process could be concluded and the necessity of this modification could be proved.
