The traditional printing checking method always uses printing control strips,but the results are not very well in repeatability and stability. In this paper,the checking methods for printing quality basing on image ar...The traditional printing checking method always uses printing control strips,but the results are not very well in repeatability and stability. In this paper,the checking methods for printing quality basing on image are taken as research objects. On the base of the traditional checking methods of printing quality,combining the method and theory of digital image processing with printing theory in the new domain of image quality checking,it constitute the checking system of printing quality by image processing,and expound the theory design and the model of this system. This is an application of machine vision. It uses the high resolution industrial CCD(Charge Coupled Device) colorful camera. It can display the real-time photographs on the monitor,and input the video signal to the image gathering card,and then the image data transmits through the computer PCI bus to the memory. At the same time,the system carries on processing and data analysis. This method is proved by experiments. The experiments are mainly about the data conversion of image and ink limit show of printing.展开更多
The increasing demand for airline services amidst limited resources results in passenger dissatisfaction and dwindling revenue for airports and airlines. The dynamics of service demand and resource supply results in c...The increasing demand for airline services amidst limited resources results in passenger dissatisfaction and dwindling revenue for airports and airlines. The dynamics of service demand and resource supply results in check-in issues for the stakeholders in the commercial aviation industry. This has the effect of impacting negatively on service performance, cost of operations, customer satisfaction, and overall throughput. Hence, this paper modelled the travelers’ check-in process at the “D Wing” of the Departure Section of Murtala Muhammed International Airport (MMIA), Ikeja, using Arena Software Tool. The work was carried out by determining the parameters of the queues at designated service points in the check-in process. The primary data required to develop the model were acquired by direct observation of passenger flow and oral interview. Thus, the average check-in time was determined. Thereafter, a model of the international check-in system of the MMIA was developed using Arena software in combination with Microsoft Office tools. The data collected were therefore inputted into the model and simulated;the real result was compared with the simulation result of 133 completions and there was no significant difference. The result showed that the model is a representation of the real system under study. Further work will be tailored towards simulation (<em>i.e</em>. the model will be subjected to experimentation in order to have different scenario).展开更多
With the current situation of insecurity in Nigeria and the worsening condition of Nigerian roads, there is increasing demand for air travel. This increasing demand for airline services amidst limited resources result...With the current situation of insecurity in Nigeria and the worsening condition of Nigerian roads, there is increasing demand for air travel. This increasing demand for airline services amidst limited resources results in passenger dissatisfaction and reduction of revenue for airports and airlines. The dynamics of service demand and resource supply result in check-in issues for all the stakeholders in the commercial aviation industry. Hence, this research simulated the developed model for travelers’ check-in process at the “D Wing” of the Departure Section of Murtala Muhammed International Airport (MMIA), Ikeja, using Arena Software Tool. The simulation of the developed model was carried out by varying five different configurations of the servers with respect to the baggage weighing machines and passenger profiling devices to obtain the minimum average check-in time (ACT) for the process, with each configuration undergoing 133 completions of simulation runs. The result of the experimentation revealed that the 3 × 3 × 4 configuration of servers produced the smallest ACT of 18.25 minutes. This translates to a difference of about 58 minutes from the 76.16 minutes ACT of the real system;representing about 76% improvement in the check-in time of passengers. This study contributed to knowledge by revealing that the main choke points in the MMIA check-in system occur at the baggage weighing and passenger profiling areas as against the check-in counter sub-section as advanced by previous works. Furthermore, the research added value to knowledge by creating a balance between customer satisfaction and cost of operations thereby accommodating the interests of the passenger and the operator who are the two main stakeholders in the commercial aviation industry.展开更多
A polynomial algorithm for the regularity problem of weak and branching bisimilarity on totally normed process algebra(PA) processes is given. Its time complexity is O(n3+ mn), where n is the number of transition rule...A polynomial algorithm for the regularity problem of weak and branching bisimilarity on totally normed process algebra(PA) processes is given. Its time complexity is O(n3+ mn), where n is the number of transition rules and m is the maximal length of the rules. The algorithm works for totally normed basic process algebra(BPA) as well as basic parallel process(BPP).展开更多
Web service （WS） is an emerging software technology, especially acting an important role in cloud computing. The WS choreography description language （WS-CDL） is the standard for modeling the observable behavior o...Web service （WS） is an emerging software technology, especially acting an important role in cloud computing. The WS choreography description language （WS-CDL） is the standard for modeling the observable behavior of WS composition across multiple participants from a global point of view. However, it lacks of a formal semantics and could easily lead to misunderstanding and different implementations. In this paper, the WS-CDL based specifications are formally extracted in a communicating sequential process supporting a formal approach to checking WS models. In addition, formalisms and model checking are explicitly illustrated through a simple but non-trivial example with the help of model checker process analysis toolkit （PAT）.展开更多
在民机自动飞行过程中,飞行导引系统的模式转换是影响安全的重要因素,应对其进行充分的安全性分析。传统安全分析方法主要关注各个组件的失效因素,忽略了由组件间非线性交互产生的安全问题。为此,采用系统理论过程分析(System Theory Pr...在民机自动飞行过程中,飞行导引系统的模式转换是影响安全的重要因素,应对其进行充分的安全性分析。传统安全分析方法主要关注各个组件的失效因素,忽略了由组件间非线性交互产生的安全问题。为此,采用系统理论过程分析(System Theory Process Analysis,STPA)方法,对飞行导引系统模式转换进行系统且完整的分析。同时,鉴于STPA方法中存在需人工分析的部分,引入了基于时间自动机理论的形式化模型检查工具UPPAAL对系统进行建模与验证,以确保控制结构图的正确性,并识别真正不安全控制行为(Unsafe Control Action,UCA),从而避免资源的浪费。最后,提出规范化的致因因素分析框架对通过验证的UCA进行逐一分析。实例证明,所提方法对航空类复杂系统安全性分析具有较好的效果。展开更多
The Internet of Things becomes Internet of Everything when in the process of communication machine-to-machine also intelligent forms of communication between human and machine are involved. Cities can be viewed as a m...The Internet of Things becomes Internet of Everything when in the process of communication machine-to-machine also intelligent forms of communication between human and machine are involved. Cities can be viewed as a microcosm of this interconnected system where ICT and emerging technologies can be enabling factors to transform cities in Smart Cities. Cities can take great advantage by using information intelligence to achieve important public-policy goals and, in particular, by enabling network communication channels between citizens and public administrators in order to provide information and online services in real time through platform systems rather than by means of humans, using Artificial Intelligence and Natural Language Processing techniques. This work was the first step of a wider project aimed at providing a Spell Checking Web Service API for Smart City communication platforms able to automatically select, among the large availability of open source spell checking tools, the most suitable tool based on the semantic structure of the specific textual data. The system should manage an enhanced Italian Vocabulary Database, specifically implemented to support all the tools of the system. The goal of the present work was to test, through an experimental research, the feasibility of the entire project by implementing a Spell Checking Prototype System designed to manage two selected spell checking tools. Results showed that the Spell Checking Prototype System significantly improves performances by allowing the user to select the most suitable tool for the specific semantic structure of the text. The system also enables to manage the list of exceptions, which continuously enhance the Italian Vocabulary Database. The experimentation proved scientific evidence of the validity of the project aimed at implementing a Spell Checking Web Service API in order to improve the quality of natural language data to be stored or processed in Smart City NCeSDP systems, through the use of existing spell checking tools.展开更多
业务流程合规性检查可以帮助企业及早发现潜在问题,保证业务流程的正常运行和安全性。提出一种基于改进BERT(Bidirectional Encoder Representations from Transformers)和轻量化卷积神经网络(CNN)的业务流程合规性检查方法。首先,根据...业务流程合规性检查可以帮助企业及早发现潜在问题,保证业务流程的正常运行和安全性。提出一种基于改进BERT(Bidirectional Encoder Representations from Transformers)和轻量化卷积神经网络(CNN)的业务流程合规性检查方法。首先,根据历史事件日志中的轨迹提取轨迹前缀,构造带拟合情况标记的数据集;其次,使用融合相对上下文关系的BERT模型完成轨迹特征向量的表示;最后,使用轻量化CNN模型构建合规性检查分类器,完成在线业务流程合规性检查,有效提高合规性检查的准确率。在5个真实事件日志数据集上进行实验,结果表明,该方法相比Word2Vec+CNN模型、Transformer模型、BERT分类模型在准确率方面有较大提升,且与传统BERT+CNN相比,所提方法的准确率最高可提升2.61%。展开更多
This paper analyzes the feasibility of the remote check and acceptance of product and presents an architecture through which the remote product check and acceptance system can be realized. This paper also illuminates ...This paper analyzes the feasibility of the remote check and acceptance of product and presents an architecture through which the remote product check and acceptance system can be realized. This paper also illuminates the work process of this system and discusses the technological details of the quality inspection as well as the key technologies.展开更多
文摘The traditional printing checking method always uses printing control strips,but the results are not very well in repeatability and stability. In this paper,the checking methods for printing quality basing on image are taken as research objects. On the base of the traditional checking methods of printing quality,combining the method and theory of digital image processing with printing theory in the new domain of image quality checking,it constitute the checking system of printing quality by image processing,and expound the theory design and the model of this system. This is an application of machine vision. It uses the high resolution industrial CCD(Charge Coupled Device) colorful camera. It can display the real-time photographs on the monitor,and input the video signal to the image gathering card,and then the image data transmits through the computer PCI bus to the memory. At the same time,the system carries on processing and data analysis. This method is proved by experiments. The experiments are mainly about the data conversion of image and ink limit show of printing.
文摘The increasing demand for airline services amidst limited resources results in passenger dissatisfaction and dwindling revenue for airports and airlines. The dynamics of service demand and resource supply results in check-in issues for the stakeholders in the commercial aviation industry. This has the effect of impacting negatively on service performance, cost of operations, customer satisfaction, and overall throughput. Hence, this paper modelled the travelers’ check-in process at the “D Wing” of the Departure Section of Murtala Muhammed International Airport (MMIA), Ikeja, using Arena Software Tool. The work was carried out by determining the parameters of the queues at designated service points in the check-in process. The primary data required to develop the model were acquired by direct observation of passenger flow and oral interview. Thus, the average check-in time was determined. Thereafter, a model of the international check-in system of the MMIA was developed using Arena software in combination with Microsoft Office tools. The data collected were therefore inputted into the model and simulated;the real result was compared with the simulation result of 133 completions and there was no significant difference. The result showed that the model is a representation of the real system under study. Further work will be tailored towards simulation (<em>i.e</em>. the model will be subjected to experimentation in order to have different scenario).
文摘With the current situation of insecurity in Nigeria and the worsening condition of Nigerian roads, there is increasing demand for air travel. This increasing demand for airline services amidst limited resources results in passenger dissatisfaction and reduction of revenue for airports and airlines. The dynamics of service demand and resource supply result in check-in issues for all the stakeholders in the commercial aviation industry. Hence, this research simulated the developed model for travelers’ check-in process at the “D Wing” of the Departure Section of Murtala Muhammed International Airport (MMIA), Ikeja, using Arena Software Tool. The simulation of the developed model was carried out by varying five different configurations of the servers with respect to the baggage weighing machines and passenger profiling devices to obtain the minimum average check-in time (ACT) for the process, with each configuration undergoing 133 completions of simulation runs. The result of the experimentation revealed that the 3 × 3 × 4 configuration of servers produced the smallest ACT of 18.25 minutes. This translates to a difference of about 58 minutes from the 76.16 minutes ACT of the real system;representing about 76% improvement in the check-in time of passengers. This study contributed to knowledge by revealing that the main choke points in the MMIA check-in system occur at the baggage weighing and passenger profiling areas as against the check-in counter sub-section as advanced by previous works. Furthermore, the research added value to knowledge by creating a balance between customer satisfaction and cost of operations thereby accommodating the interests of the passenger and the operator who are the two main stakeholders in the commercial aviation industry.
基金the National Natural Science Foundation of China(Nos.61261130589 and 61033002)the Fund of the Science and Technology Commission of Shanghai Municipality(No.11XD1402800)
文摘A polynomial algorithm for the regularity problem of weak and branching bisimilarity on totally normed process algebra(PA) processes is given. Its time complexity is O(n3+ mn), where n is the number of transition rules and m is the maximal length of the rules. The algorithm works for totally normed basic process algebra(BPA) as well as basic parallel process(BPP).
基金supported by the Shanghai Leading Academic Discipline Project (Grant No.J50103)
文摘Web service （WS） is an emerging software technology, especially acting an important role in cloud computing. The WS choreography description language （WS-CDL） is the standard for modeling the observable behavior of WS composition across multiple participants from a global point of view. However, it lacks of a formal semantics and could easily lead to misunderstanding and different implementations. In this paper, the WS-CDL based specifications are formally extracted in a communicating sequential process supporting a formal approach to checking WS models. In addition, formalisms and model checking are explicitly illustrated through a simple but non-trivial example with the help of model checker process analysis toolkit （PAT）.
文摘在民机自动飞行过程中,飞行导引系统的模式转换是影响安全的重要因素,应对其进行充分的安全性分析。传统安全分析方法主要关注各个组件的失效因素,忽略了由组件间非线性交互产生的安全问题。为此,采用系统理论过程分析(System Theory Process Analysis,STPA)方法,对飞行导引系统模式转换进行系统且完整的分析。同时,鉴于STPA方法中存在需人工分析的部分,引入了基于时间自动机理论的形式化模型检查工具UPPAAL对系统进行建模与验证,以确保控制结构图的正确性,并识别真正不安全控制行为(Unsafe Control Action,UCA),从而避免资源的浪费。最后,提出规范化的致因因素分析框架对通过验证的UCA进行逐一分析。实例证明,所提方法对航空类复杂系统安全性分析具有较好的效果。
文摘The Internet of Things becomes Internet of Everything when in the process of communication machine-to-machine also intelligent forms of communication between human and machine are involved. Cities can be viewed as a microcosm of this interconnected system where ICT and emerging technologies can be enabling factors to transform cities in Smart Cities. Cities can take great advantage by using information intelligence to achieve important public-policy goals and, in particular, by enabling network communication channels between citizens and public administrators in order to provide information and online services in real time through platform systems rather than by means of humans, using Artificial Intelligence and Natural Language Processing techniques. This work was the first step of a wider project aimed at providing a Spell Checking Web Service API for Smart City communication platforms able to automatically select, among the large availability of open source spell checking tools, the most suitable tool based on the semantic structure of the specific textual data. The system should manage an enhanced Italian Vocabulary Database, specifically implemented to support all the tools of the system. The goal of the present work was to test, through an experimental research, the feasibility of the entire project by implementing a Spell Checking Prototype System designed to manage two selected spell checking tools. Results showed that the Spell Checking Prototype System significantly improves performances by allowing the user to select the most suitable tool for the specific semantic structure of the text. The system also enables to manage the list of exceptions, which continuously enhance the Italian Vocabulary Database. The experimentation proved scientific evidence of the validity of the project aimed at implementing a Spell Checking Web Service API in order to improve the quality of natural language data to be stored or processed in Smart City NCeSDP systems, through the use of existing spell checking tools.
文摘业务流程合规性检查可以帮助企业及早发现潜在问题,保证业务流程的正常运行和安全性。提出一种基于改进BERT(Bidirectional Encoder Representations from Transformers)和轻量化卷积神经网络(CNN)的业务流程合规性检查方法。首先,根据历史事件日志中的轨迹提取轨迹前缀,构造带拟合情况标记的数据集;其次,使用融合相对上下文关系的BERT模型完成轨迹特征向量的表示;最后,使用轻量化CNN模型构建合规性检查分类器,完成在线业务流程合规性检查,有效提高合规性检查的准确率。在5个真实事件日志数据集上进行实验,结果表明,该方法相比Word2Vec+CNN模型、Transformer模型、BERT分类模型在准确率方面有较大提升,且与传统BERT+CNN相比,所提方法的准确率最高可提升2.61%。
文摘This paper analyzes the feasibility of the remote check and acceptance of product and presents an architecture through which the remote product check and acceptance system can be realized. This paper also illuminates the work process of this system and discusses the technological details of the quality inspection as well as the key technologies.
