Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be charact...Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be characterized as a stationary non-Gaussian field. This paper reviews several simulation algorithms related to the Spectral Representation Method （SRM） and the Static Transformation Method （STM）. Polynomial and Exponential transformation functions （PSTM and ESTM） are discussed. Deficiencies in current algorithms, with respect to accuracy, stability and efficiency, are analyzed, and the algorithms are improved for better practical application. In order to verify the improved algorithm, wind pressure fields on a large-span roof are simulated and compared with wind tunnel data. The simulation results fit well with the wind tunnel data, and the algorithm accuracy, stability and efficiency are shown to be better than those of current algorithms.展开更多
The vertical transport of mass at the top of the boundary layer is considered as a link between the boundary layer and free atmosphere.The adjustment of the wind and pressure fields in the boundary layer is studied un...The vertical transport of mass at the top of the boundary layer is considered as a link between the boundary layer and free atmosphere.The adjustment of the wind and pressure fields in the boundary layer is studied under the consideration of the interaction between the boundary layer and free atmosphere.The vertical motion at the top of the boundary layer is evaluated.The results show that the distinguished differ- ences of the present results from classical Ekman layer do exist and they are discussed in the paper.展开更多
The finite volume method was applied to numerically simulate the bottom pressure field induced by regular waves,vehicles in calm water and vehicles in regular waves.The solution of Navier-Stokes(N-S)equations in the v...The finite volume method was applied to numerically simulate the bottom pressure field induced by regular waves,vehicles in calm water and vehicles in regular waves.The solution of Navier-Stokes(N-S)equations in the vicinity of numerical wave tank's boundary was forced towards the wave theoretical solution by incorporating momentum source terms,thereby reducing adverse effects such as wave reflection.Simulations utilizing laminar flow,turbulent flow,and ideal fluid models were all found capable of effectively capturing the waveform and bottom pressure of regular waves,agreeing well with experimental data.In predicting the bottom pressure field of the submerged vehicle,turbulent simulations considering fluid viscosity and boundary layer development provided more accurate predictions for the stern region than inviscid simulations.Due to sphere's diffractive effect,the sphere's bottom pressure field in waves is not a linear superposition of the wave's and the sphere's bottom pressure field.However,a slender submerged vehicle exhibits a weaker diffractive effect on waves,thus the submerged vehicle's bottom pressure field in waves can be approximated as a linear superposition of the wave's and the submerged vehicle's bottom pressure field,which simplifies computation and analysis.展开更多
The squeeze pressure field and power ultrasonic field were applied during the conventional casting process of Al-5.0Cu alloy simultaneously. The effects of individual squeeze pressure or power ultrasonic and their cou...The squeeze pressure field and power ultrasonic field were applied during the conventional casting process of Al-5.0Cu alloy simultaneously. The effects of individual squeeze pressure or power ultrasonic and their coupling on the microstructures and microhardness of Al-5.0Cu alloy were studied by optical microscopy, scanning electron microscopy, image analysis and micro Vickers hardness test. The results show that compared with the conventional casting, refined microstructures, homogeneous distribution of α（Al） and θ（Al2Cu） and improved microhardness can be obtained when squeeze pressure or power ultrasonic is applied individually. For the case of combined fields, both the treated region and the improvement of microstructure and properties can be enhanced.展开更多
This paper presents an investigation on the characteristics of overlying strata collapse and mining-induced pressure in fault-influenced zone by employing the physical modeling in consideration of fault structure. The...This paper presents an investigation on the characteristics of overlying strata collapse and mining-induced pressure in fault-influenced zone by employing the physical modeling in consideration of fault structure. The precursory information of fault slip during the underground mining activities is studied as well. Based on the physical modeling, the optimization of roadway support design and the field verification in fault-influenced zone are conducted. Physical modeling results show that, due to the combined effect of mining activities and fault slip, the mining-induced pressure and the extent of damaged rock masses in the fault-influenced zone are greater than those in the uninfluenced zone. The sharp increase and the succeeding stabilization of stress or steady increase in displacement can be identified as the precursory information of fault slip. Considering the larger mining-induced pressure in the fault-influenced zone, the new support design utilizing cables is proposed. The optimization of roadway support design suggests that the cables can be anchored in the stable surrounding rocks and can effectively mobilize the load bearing capacity of the stable surrounding rocks. The field observation indicates that the roadway is in good condition with the optimized roadway support design.展开更多
In order to solve the deformation of the hydrostatic thrust bearing with multi-pad annular recess in the heavy computer numerical control （ CNC ） equipment, the simulation concerning pressure feld of hydrostatic thr...In order to solve the deformation of the hydrostatic thrust bearing with multi-pad annular recess in the heavy computer numerical control （ CNC ） equipment, the simulation concerning pressure feld of hydrostatic thrust bearing with multi-pad annular recesses was carded out. The finite volume method of computational fluid dynamics （ CFD ） was used to compute the three-dlmensional pressure field of gap fluid between the rotary worktable and the base. The influence of the rotational speed on the bearing pressure performance was studied based on CFD and lubrication theory, and the method revealed the pressure distribution law. The results qualitatively agree well with the experimental data. The results indicate that the oil cavity pressure decreases gradually with rotational speed enhancing. The reliability of a hydrostatic thrust bearing with malti-pad annular recess can be predicted through this method, and the optimal design of such products can be achieved, and the numerical simulation method can provide reasonable data for design, lubrication, experiment, and deformation computation of hydrostatic thrust bearing in the heavy CNC equipment.展开更多
This study proposes a novel approach to study stress field distribution and overlying ground pressure behavior in shallow seam mining in gully terrain.This approach combines numerical simulations and field tests based...This study proposes a novel approach to study stress field distribution and overlying ground pressure behavior in shallow seam mining in gully terrain.This approach combines numerical simulations and field tests based on the conditions of gully terrain in the Chuancao Gedan Mine.The effects of gully terrain on the in situ stress field of coal beds can be identified by the ratio of self-weight stress to vertical stress(η) at the location corresponding to the maximum vertical stress.Based on the function η =j(h),the effect of gully terrain on the stress field of overlying strata of the entire field can be characterized as a significantly affected area,moderately affected area,or non-affected area.Working face 6106 in the Chuancao Gedan Mine had a coal bed Jepth <80 m and was located in what was identified as a significantly affected area.Hence,mining may cause sliding of the gully slope and increased loading(including significant dynamic loading) on the roof strata.Field tests suggest that significant dynamic pressures were observed at the body and foot of the gully slope,and that dynamic loadings were observed upslope of the working face expansion,provided that the expanding direction of the working face is parallel to the gully.展开更多
Proper orthogonal decomposition （POD） is an effective statistical technique for data reduction and feature extraction of the random field including the wind field. This paper introduces the theory of the POD and ill...Proper orthogonal decomposition （POD） is an effective statistical technique for data reduction and feature extraction of the random field including the wind field. This paper introduces the theory of the POD and illustrates engineering of structures. Using the POD technique, it is shown that wind pressure data can be accurately reconstructed with a limited number of modes using the wind pressure data from wind tunnel test. Comparing the reconstructed values by POD with the original measured values from the wind tunnel test both in the time and frequency domains, it is concluded that the proper orthogonal decomposition（POD） is an efficient and practical technique for deriving the random wind pressure field from limited known data as shown in the pitched roof example in this paper.展开更多
The intensification of physicochemical processes in the sonochemical reactor chamber is widely used in problems of synthesis,extraction and separation.One of the most important mechanisms at play in such processes is ...The intensification of physicochemical processes in the sonochemical reactor chamber is widely used in problems of synthesis,extraction and separation.One of the most important mechanisms at play in such processes is the acoustic cavitation due to the non-uniform distribution of acoustic pressure in the chamber.Cavitation has a strong impact on the surface degradation mechanisms.In this work,a numerical calculation of the acoustic pressure distribution inside the reactor chamber was performed using COMSOL Multiphysics.The numerical results have revealed the dependence of the structure of the acoustic pressure field on the boundary conditions for various thicknesses of the piezoelectric transducer.In particular,the amplitude of the acoustic pressure is minimal in the case of absorbing boundaries,and the attenuation becomes more significant as the thickness of the piezoelectric transducer increases.In addition,reflective boundaries play a significant role in the formation and distribution of zones of maximum cavitation activity.展开更多
Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was estab...Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was established.The differential method was used to do the coupled numerical calculation,and the calculation results were compared with experimental and field data to verify the accuracy of the model.When the interactions between temperature,pressure and hydration reaction are considered,the calculation accuracy of the model proposed is within 5.6%,which can meet the engineering requirements.A series of numerical simulation was conducted to find out the variation pattern of temperature,pressure and hydration degree during the cement curing.The research results show that cement temperature increases dramatically as a result of the heat of cement hydration.With the development of cement gel strength,the pore pressure of cement slurry decreases gradually to even lower than the formation pressure,causing gas channeling;the transient temperature and pressure have an impact on the rate of cement hydration reaction,so cement slurry in the deeper part of wellbore has a higher rate of hydration rate as a result of the high temperature and pressure.For well cementing in deep water regions,the low temperature around seabed would slow the rate of cement hydration and thus prolong the cementing cycle.展开更多
The characteristics of low pressure plasma produced by a gas discharges lie in thatthe energy of the electrons are much higher than that of the heavy particles in the system. Inthis paperl the low-pressure plasma trea...The characteristics of low pressure plasma produced by a gas discharges lie in thatthe energy of the electrons are much higher than that of the heavy particles in the system. Inthis paperl the low-pressure plasma treatment technology for the environmental contaminantswas synthetically studied, and the reaction processing and mechanism between the low-pressureplasma and the environmental contaminants were theoretically analyzed. At last, the prospectsand existing problems on the application of low-pressure plasma in the field of environmentalprotection were discussed.展开更多
The relation between mining pressure field-fracture field and gas emission of working face is analyzed, and the concept that there is a stress point （or strain point） among permeability of coal is presented. It is b...The relation between mining pressure field-fracture field and gas emission of working face is analyzed, and the concept that there is a stress point （or strain point） among permeability of coal is presented. It is believed that the mutation of coal permeability caused by the sudden loading or unloading of working face roof as periodic weighting occurs is the main reason that a lot of gas pour into the working face. Based on the above concept, the relation is established among abutment pressure during periodie weighting, permeability of coal seam and gas emission, and relation graph is drawn. Then the loading and unloading features of coal at the moment of fracture and non-fracture of main roof are revealed. And finally it is presented that the process of sudden loading or unloading as periodic weighting occurs plays an important role in rupture propagation of coal, analytical movement of gas and gas emission.展开更多
The Field bus device based on HART field communications protocol has been widely used in industrial control. In the pro-duction of petroleum, the method which using the HART bus to transfer the temperature and pressur...The Field bus device based on HART field communications protocol has been widely used in industrial control. In the pro-duction of petroleum, the method which using the HART bus to transfer the temperature and pressure data collected from the oilwell, can improve the traditional collecting method's shortage, prevent the failure of the data transfer caused of the rupture of the oiltransfer pole, moreover, can enhance the collection accuracy.展开更多
Clarifying the gas ingestion mechanism in the turbine disc cavity of marine gas turbines is crucial for ensuring the normal operation of turbines.However, the ingestion is influenced by factors such as the rotational ...Clarifying the gas ingestion mechanism in the turbine disc cavity of marine gas turbines is crucial for ensuring the normal operation of turbines.However, the ingestion is influenced by factors such as the rotational pumping effect, mainstream pressure asymmetry, rotor–stator interaction,and unsteady flow structures, complicating the flow. To investigate the impact of rotor–stator interaction on ingestion, this paper decouples the model to include only the mainstream. This research employs experiments and numerical simulations to examine the effects of varying the flow coefficient through changes in rotational speed and mainstream flow rate. The main objective is to understand the influence of different rotor–stator interactions on the mainstream pressure field, accompanied by mechanistic explanations. The findings reveal inconsistent effects of the two methods for changing the flow coefficient on the mainstream pressure field. Particularly, the pressure distribution on the vane side primarily depends on the mainstream flow rate, while the pressure on the blade side is influenced by the mainstream flow rate and the attack angle represented by the flow coefficient. A larger angle of attack angle can increase pressure on the blade side, even surpassing the pressure on the vane side. Assessing the degree of mainstream pressure unevenness solely based on the pressure difference on the vane side is insufficient. This research provides a basis for subsequent studies on the influence of coupled real turbine rotor–stator interaction on gas ingestion.展开更多
Focusing on the conversion of pressure energy and internal energy under viscous dissipation,a heat-fluid-solid coupling method is established to study the flow and stress fields of 100 MPa submerged water jets.Results...Focusing on the conversion of pressure energy and internal energy under viscous dissipation,a heat-fluid-solid coupling method is established to study the flow and stress fields of 100 MPa submerged water jets.Results indicate that pressure energy to internal energy conversion primarily occurs at three locations:the nozzle wall,the potential core edge,and the impact wall,with the most intense conversion occurring at the impact wall.The impact temperature of the jet can reach 200℃,and the high-temperature region covers an area more than 4 times that of the high-pressure.Thermal stress can especially amplify erosion stress by more than 100%and expand the erosion area by more than 400%.Therefore,it serves as a dominant factor determining the optimal spray distance and jet angle in hard rock(E≥40 GPa).With increased spray distance or jet angle,impact pressure decreases,while the high-temperature zone moves toward the high-pressure region,thus increasing the overlap between the two regions.This extended overlap enhances the temperature-pressure coupling effect,consequently reducing the threshold pressure for jet-breaking rock.Therefore,the maximum erosion stress increases first and then decreases,and an optimal spray distance and jet angle exist.The optimal jet angle,defined by the maximum tensile stress,decreases with the dimensionless spray distance increase,ranging between 0°and 40°.This temperature-pressure coupling reduces rock-breaking threshold pressure by 15%-75%for elastic moduli of 40-80 GPa,with maximum erosion stress peaking at a dimensionless spray distance of 9 and jet angles of 15°-20°.When the overlap region decreases,the area affected by the temperature and pressure fields increases,leading to an increase in the rock-breaking area.It is important to note that reducing the rock-breaking threshold pressure and increasing the rock-breaking area are mutually exclusive objectives.It is necessary to optimize the design of the spray distance and jet angle according to the on-site rock-breaking requirements.展开更多
The placement of pressure taps on the surface of the wind tunnel test model is an important means toobtain the surface pressure distribution.However,limited by space location and experimental cost,it isdifficult to ar...The placement of pressure taps on the surface of the wind tunnel test model is an important means toobtain the surface pressure distribution.However,limited by space location and experimental cost,it isdifficult to arrange enough pressure measuring taps on the surface of complex models to obtain completepressure distribution information,thus it is impossible to obtain accurate lift and moment characteristicsthrough integration.The paper proposes a refined reconstruction method of airfoil surface pressure basedon compressed sensing,which can reconstruct the pressure distribution with high precision with lesspressure measurement data.Tests on typical airfoil subsonic flow around flow show that the accuracyof lift and moment after the pressure integration reconstructed by 4-8 measuring points can meet therequirements of the national military standard.The algorithm is robust to noise,and provides a new ideafor obtaining accurate force data from sparse surface pressure tests in engineering.展开更多
According to the ship observation data over the South Indian Ocean during 1950 1995, taking 1°× 1° and 5°× 5°grid, the characteristics and variation rule of wind are analyzed. Through ana...According to the ship observation data over the South Indian Ocean during 1950 1995, taking 1°× 1° and 5°× 5°grid, the characteristics and variation rule of wind are analyzed. Through analyzing the chart of isopleths of the monthly elements, the conclusion that the seasonal variation of the wind field over the South Indian Ocean is less remarkable than that in the oceans of the Northern Hemisphere is got. The seasonal variation of the wind field is also obvious in this region, but the seasonal difference is little. The wind in winter is stronger than in summer, correspondingly, the average wind speed is higher, and the frequencies of gale of forces ≥ 6 and 8 are also higher. The north of 10°S is a monsoon area; Southeast wind prevails all over the year in the rest of the trade wind area; Westerly wind dominates in the south of 40°S. This paper provides specific data of wind field and variation for ship ocean transportation, ocean-going visits and scientific experiment.展开更多
A streamwise vorticity equation is derived in generalized natural coordinates. This equation reveals that the total change and local change of the streamwise vorticity are mainly determined by the curvature of streaml...A streamwise vorticity equation is derived in generalized natural coordinates. This equation reveals that the total change and local change of the streamwise vorticity are mainly determined by the curvature of streamline, unsteady feature of streamline and magnitude of velocity. This equation enables the study of mesoscale or small-scale systems since the term associated with pressure gradient force in the original vorticity equation is replaced by terms associated with streamlines and wind speed. With this modification the wind field rather than the pressure field is used in the calculation considering that 1) the pressure field is to adapt wind field. 2) Smoother and more consecutive streamline pattern is easier to obtain either by data analysis or by the numerical simulation. From this sense, this present study suggests the application of this equation to studying the evolution of severe storm system as well as other simplified cases. Key words Wind field instead of pressure field - Generalized natural coordinate - Streamwise vorticity This work was supported by the project on the study of the formative mechanism and predictive theory of the significant climate and weather disaster in China under Grant G 1998040907 and by the key project on the Dynamic Study of Severe Mesoscale Covective Systems sponsored by the National Natural Science Foundation of China under Grant No. 49735180.展开更多
A line contact model of elastic coated solids is presented based on the influence coefficients(ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displa...A line contact model of elastic coated solids is presented based on the influence coefficients(ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displacement and stresses are obtained from their corresponding frequency response functions(FRF) by using a conversion method based on fast Fourier transformation(FFT). The contact pressure and the stress field in the subsurface are obtained by employing conjugate gradient method(CGM) and discrete convolution fast Fourier transformation(DC-FFT). Comparison of the contact pressure and subsurface stresses obtained by the numerical method with the exact analytical solutions for Hertz contact is conducted, and the results show that the numerical solution has a very high accuracy and verify the validity of the contact model. The effect of the stiffness and thickness of coatings is further numerically studied. The result shows that the effects on contact pressure and contact width are opposite for hard and soft coatings and are intensified with the increase of coating thickness; the locations of crack initiation and propagation are different for soft and hard coatings; the risk of cracks and delaminations of coatings can be brought down by improving the lubrication condition or optimizing the non-dimensional parameter h/bh. This research offers a tool to numerically analyze the problem of elastic coated solids in line contact and make the blindness and randomness of trial-type coating design less.展开更多
AIM：To compare the corneal biomechanical properties difference by ocular response analyzer（ORA） in normal tension glaucoma（NTG） patients with different visual field（VF） progression speed. METHODS：NTG patients ...AIM：To compare the corneal biomechanical properties difference by ocular response analyzer（ORA） in normal tension glaucoma（NTG） patients with different visual field（VF） progression speed. METHODS：NTG patients with well-controlled Goldmann applanation tonometer（GAT） who routinely consulted Kitasato University Hospital Glaucoma Department between January 2010 and February 2014 were enrolled.GAT and ORA parameters including corneal compensated intraocular pressure（lOPcc）,Goldmann estimated intraocular pressure（lOPg）,corneal hysteresis（CH）,corneal resistance factor（CRF） were recorded.VF was tested by Swedish interactive threshold algorithm（SITA）-standard 30-2 fields.All patients underwent VF measurement regularly and GAT did not exceed 15 mm Hg at any time during the 3y follow up.Patients were divided into four groups according to VF change over 3y,and ORA findings were compared between the upper 25th percentile group（slow progression group） and the lower 25th percentile group（rapid progression group）.RESULTS：Eighty-two eyes of 56 patients were studied.There were 21 eyes（21 patients） each in rapid and slow progression groups respectively.GAT,lOPcc,lOPg,CH,CRF were 12.1＋1.4 mm Hg,15.8±1.8 mm Hg,12.8±2.0 mm Hg,8.4±1.1 mm Hg,7.9±1.3 mm Hg respectively in rapid progression group and 11.5±1.3 mm Hg,13.5±2.1 mm Hg,11.2±1.6 mm Hg,9.3±1.1 mm Hg,8.2±0.9 mm Hg respectively in slow progression group（P=0.214,〈0.001,0.007,0.017,0.413,respectively）.In bivariate correlation analysis,lOPcc,lOPcc-GAT and CH were significant correlated with m△MD（r =-0.292,-0.312,0.228 respectively,P =0.008,0.004,0.039 respectively）.CONCLUSION：Relatively rapid VF progression occurred in NTG patients whose lOPcc are rather high,CH are rather low and the difference between lOPcc and GAT are relatively large.Higher lOPcc and lower CH are associated with VF progression in NTG patients.This study suggests that GAT measures might underestimate the IOP in such patients.展开更多
基金National Natural Science Foundation of China under Grant Nos.51278160,51478155,51378147
文摘Stochastic simulation is an important means of acquiring fluctuating wind pressures for wind induced response analyses in structural engineering. The wind pressure acting on a large-span space structure can be characterized as a stationary non-Gaussian field. This paper reviews several simulation algorithms related to the Spectral Representation Method （SRM） and the Static Transformation Method （STM）. Polynomial and Exponential transformation functions （PSTM and ESTM） are discussed. Deficiencies in current algorithms, with respect to accuracy, stability and efficiency, are analyzed, and the algorithms are improved for better practical application. In order to verify the improved algorithm, wind pressure fields on a large-span roof are simulated and compared with wind tunnel data. The simulation results fit well with the wind tunnel data, and the algorithm accuracy, stability and efficiency are shown to be better than those of current algorithms.
文摘The vertical transport of mass at the top of the boundary layer is considered as a link between the boundary layer and free atmosphere.The adjustment of the wind and pressure fields in the boundary layer is studied under the consideration of the interaction between the boundary layer and free atmosphere.The vertical motion at the top of the boundary layer is evaluated.The results show that the distinguished differ- ences of the present results from classical Ekman layer do exist and they are discussed in the paper.
文摘The finite volume method was applied to numerically simulate the bottom pressure field induced by regular waves,vehicles in calm water and vehicles in regular waves.The solution of Navier-Stokes(N-S)equations in the vicinity of numerical wave tank's boundary was forced towards the wave theoretical solution by incorporating momentum source terms,thereby reducing adverse effects such as wave reflection.Simulations utilizing laminar flow,turbulent flow,and ideal fluid models were all found capable of effectively capturing the waveform and bottom pressure of regular waves,agreeing well with experimental data.In predicting the bottom pressure field of the submerged vehicle,turbulent simulations considering fluid viscosity and boundary layer development provided more accurate predictions for the stern region than inviscid simulations.Due to sphere's diffractive effect,the sphere's bottom pressure field in waves is not a linear superposition of the wave's and the sphere's bottom pressure field.However,a slender submerged vehicle exhibits a weaker diffractive effect on waves,thus the submerged vehicle's bottom pressure field in waves can be approximated as a linear superposition of the wave's and the submerged vehicle's bottom pressure field,which simplifies computation and analysis.
基金Project(51374110)supported by the National Natural Science Foundation of ChinaProject(2015A030312003)supported by the Natural Science Foundation of Guangdong Province for Research Team,China
文摘The squeeze pressure field and power ultrasonic field were applied during the conventional casting process of Al-5.0Cu alloy simultaneously. The effects of individual squeeze pressure or power ultrasonic and their coupling on the microstructures and microhardness of Al-5.0Cu alloy were studied by optical microscopy, scanning electron microscopy, image analysis and micro Vickers hardness test. The results show that compared with the conventional casting, refined microstructures, homogeneous distribution of α（Al） and θ（Al2Cu） and improved microhardness can be obtained when squeeze pressure or power ultrasonic is applied individually. For the case of combined fields, both the treated region and the improvement of microstructure and properties can be enhanced.
基金financially supported by the National Natural Science Foundation of China(No.41502184)Beijing Natural Science Foundation(No.2164067)+2 种基金National Key Research and Development Program(No.2016YFC0801401)Fundamental Research Funds for the Central Universities(No.2014QL01)Innovation Training Programs for Undergraduate Students(Nos.201411413054 and SKLCRSM14CXJH08)
文摘This paper presents an investigation on the characteristics of overlying strata collapse and mining-induced pressure in fault-influenced zone by employing the physical modeling in consideration of fault structure. The precursory information of fault slip during the underground mining activities is studied as well. Based on the physical modeling, the optimization of roadway support design and the field verification in fault-influenced zone are conducted. Physical modeling results show that, due to the combined effect of mining activities and fault slip, the mining-induced pressure and the extent of damaged rock masses in the fault-influenced zone are greater than those in the uninfluenced zone. The sharp increase and the succeeding stabilization of stress or steady increase in displacement can be identified as the precursory information of fault slip. Considering the larger mining-induced pressure in the fault-influenced zone, the new support design utilizing cables is proposed. The optimization of roadway support design suggests that the cables can be anchored in the stable surrounding rocks and can effectively mobilize the load bearing capacity of the stable surrounding rocks. The field observation indicates that the roadway is in good condition with the optimized roadway support design.
基金National Natural Science Foundations of China(No.51075106,No.51005063,No.50975066)Technology Items of Heilongjiang Provincial Education Department,China(No.12511087,No.12521096,No.12511086,No.12511088,No.11551080,No.12521119)+1 种基金Projects of the Special Fund on the Science and Technology Innovation People of Harbin,China(No.2012RFQXG077)the 2012 National College of Innovative Pilot Project,China(No.201210214027)
文摘In order to solve the deformation of the hydrostatic thrust bearing with multi-pad annular recess in the heavy computer numerical control （ CNC ） equipment, the simulation concerning pressure feld of hydrostatic thrust bearing with multi-pad annular recesses was carded out. The finite volume method of computational fluid dynamics （ CFD ） was used to compute the three-dlmensional pressure field of gap fluid between the rotary worktable and the base. The influence of the rotational speed on the bearing pressure performance was studied based on CFD and lubrication theory, and the method revealed the pressure distribution law. The results qualitatively agree well with the experimental data. The results indicate that the oil cavity pressure decreases gradually with rotational speed enhancing. The reliability of a hydrostatic thrust bearing with malti-pad annular recess can be predicted through this method, and the optimal design of such products can be achieved, and the numerical simulation method can provide reasonable data for design, lubrication, experiment, and deformation computation of hydrostatic thrust bearing in the heavy CNC equipment.
基金supported by the Fundamental Research Funds for the Central Universities of China University of Mining and Technology(No.2014ZDPY21)
文摘This study proposes a novel approach to study stress field distribution and overlying ground pressure behavior in shallow seam mining in gully terrain.This approach combines numerical simulations and field tests based on the conditions of gully terrain in the Chuancao Gedan Mine.The effects of gully terrain on the in situ stress field of coal beds can be identified by the ratio of self-weight stress to vertical stress(η) at the location corresponding to the maximum vertical stress.Based on the function η =j(h),the effect of gully terrain on the stress field of overlying strata of the entire field can be characterized as a significantly affected area,moderately affected area,or non-affected area.Working face 6106 in the Chuancao Gedan Mine had a coal bed Jepth <80 m and was located in what was identified as a significantly affected area.Hence,mining may cause sliding of the gully slope and increased loading(including significant dynamic loading) on the roof strata.Field tests suggest that significant dynamic pressures were observed at the body and foot of the gully slope,and that dynamic loadings were observed upslope of the working face expansion,provided that the expanding direction of the working face is parallel to the gully.
基金Acknowledgements The authors are grateful for the support of this research by the Committee of National Science Foundation of China （50908077） and Foundation of Heilongjiang Province Educational Committee （11551368）.
文摘Proper orthogonal decomposition （POD） is an effective statistical technique for data reduction and feature extraction of the random field including the wind field. This paper introduces the theory of the POD and illustrates engineering of structures. Using the POD technique, it is shown that wind pressure data can be accurately reconstructed with a limited number of modes using the wind pressure data from wind tunnel test. Comparing the reconstructed values by POD with the original measured values from the wind tunnel test both in the time and frequency domains, it is concluded that the proper orthogonal decomposition（POD） is an efficient and practical technique for deriving the random wind pressure field from limited known data as shown in the pitched roof example in this paper.
文摘The intensification of physicochemical processes in the sonochemical reactor chamber is widely used in problems of synthesis,extraction and separation.One of the most important mechanisms at play in such processes is the acoustic cavitation due to the non-uniform distribution of acoustic pressure in the chamber.Cavitation has a strong impact on the surface degradation mechanisms.In this work,a numerical calculation of the acoustic pressure distribution inside the reactor chamber was performed using COMSOL Multiphysics.The numerical results have revealed the dependence of the structure of the acoustic pressure field on the boundary conditions for various thicknesses of the piezoelectric transducer.In particular,the amplitude of the acoustic pressure is minimal in the case of absorbing boundaries,and the attenuation becomes more significant as the thickness of the piezoelectric transducer increases.In addition,reflective boundaries play a significant role in the formation and distribution of zones of maximum cavitation activity.
基金Supported by the National Natural Science Foundation of China(U1762216)China National Science and Technology Major Project(2016ZX05028-001-03)
文摘Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was established.The differential method was used to do the coupled numerical calculation,and the calculation results were compared with experimental and field data to verify the accuracy of the model.When the interactions between temperature,pressure and hydration reaction are considered,the calculation accuracy of the model proposed is within 5.6%,which can meet the engineering requirements.A series of numerical simulation was conducted to find out the variation pattern of temperature,pressure and hydration degree during the cement curing.The research results show that cement temperature increases dramatically as a result of the heat of cement hydration.With the development of cement gel strength,the pore pressure of cement slurry decreases gradually to even lower than the formation pressure,causing gas channeling;the transient temperature and pressure have an impact on the rate of cement hydration reaction,so cement slurry in the deeper part of wellbore has a higher rate of hydration rate as a result of the high temperature and pressure.For well cementing in deep water regions,the low temperature around seabed would slow the rate of cement hydration and thus prolong the cementing cycle.
文摘The characteristics of low pressure plasma produced by a gas discharges lie in thatthe energy of the electrons are much higher than that of the heavy particles in the system. Inthis paperl the low-pressure plasma treatment technology for the environmental contaminantswas synthetically studied, and the reaction processing and mechanism between the low-pressureplasma and the environmental contaminants were theoretically analyzed. At last, the prospectsand existing problems on the application of low-pressure plasma in the field of environmentalprotection were discussed.
基金Natural Science Foundation of China (No.50974054)Doctoral Program Foundation of the Ministry of Education (No.20070460001)National Key Basic Research and Development Program (No.2012CB723103)
文摘The relation between mining pressure field-fracture field and gas emission of working face is analyzed, and the concept that there is a stress point （or strain point） among permeability of coal is presented. It is believed that the mutation of coal permeability caused by the sudden loading or unloading of working face roof as periodic weighting occurs is the main reason that a lot of gas pour into the working face. Based on the above concept, the relation is established among abutment pressure during periodie weighting, permeability of coal seam and gas emission, and relation graph is drawn. Then the loading and unloading features of coal at the moment of fracture and non-fracture of main roof are revealed. And finally it is presented that the process of sudden loading or unloading as periodic weighting occurs plays an important role in rupture propagation of coal, analytical movement of gas and gas emission.
文摘The Field bus device based on HART field communications protocol has been widely used in industrial control. In the pro-duction of petroleum, the method which using the HART bus to transfer the temperature and pressure data collected from the oilwell, can improve the traditional collecting method's shortage, prevent the failure of the data transfer caused of the rupture of the oiltransfer pole, moreover, can enhance the collection accuracy.
基金the National Natural Science Foundation Outstanding Youth Foundation (Grant No.52122603)the National Science and Technology Major Project (J2019-Ⅲ-0003–0046)。
文摘Clarifying the gas ingestion mechanism in the turbine disc cavity of marine gas turbines is crucial for ensuring the normal operation of turbines.However, the ingestion is influenced by factors such as the rotational pumping effect, mainstream pressure asymmetry, rotor–stator interaction,and unsteady flow structures, complicating the flow. To investigate the impact of rotor–stator interaction on ingestion, this paper decouples the model to include only the mainstream. This research employs experiments and numerical simulations to examine the effects of varying the flow coefficient through changes in rotational speed and mainstream flow rate. The main objective is to understand the influence of different rotor–stator interactions on the mainstream pressure field, accompanied by mechanistic explanations. The findings reveal inconsistent effects of the two methods for changing the flow coefficient on the mainstream pressure field. Particularly, the pressure distribution on the vane side primarily depends on the mainstream flow rate, while the pressure on the blade side is influenced by the mainstream flow rate and the attack angle represented by the flow coefficient. A larger angle of attack angle can increase pressure on the blade side, even surpassing the pressure on the vane side. Assessing the degree of mainstream pressure unevenness solely based on the pressure difference on the vane side is insufficient. This research provides a basis for subsequent studies on the influence of coupled real turbine rotor–stator interaction on gas ingestion.
基金supported by the National Natural Science Foundation of China(No.52204126)the Shandong Provincial Natural Science Foundation(Nos.ZR2022ME077,ZR2022QE060,and ZR2023ME119).
文摘Focusing on the conversion of pressure energy and internal energy under viscous dissipation,a heat-fluid-solid coupling method is established to study the flow and stress fields of 100 MPa submerged water jets.Results indicate that pressure energy to internal energy conversion primarily occurs at three locations:the nozzle wall,the potential core edge,and the impact wall,with the most intense conversion occurring at the impact wall.The impact temperature of the jet can reach 200℃,and the high-temperature region covers an area more than 4 times that of the high-pressure.Thermal stress can especially amplify erosion stress by more than 100%and expand the erosion area by more than 400%.Therefore,it serves as a dominant factor determining the optimal spray distance and jet angle in hard rock(E≥40 GPa).With increased spray distance or jet angle,impact pressure decreases,while the high-temperature zone moves toward the high-pressure region,thus increasing the overlap between the two regions.This extended overlap enhances the temperature-pressure coupling effect,consequently reducing the threshold pressure for jet-breaking rock.Therefore,the maximum erosion stress increases first and then decreases,and an optimal spray distance and jet angle exist.The optimal jet angle,defined by the maximum tensile stress,decreases with the dimensionless spray distance increase,ranging between 0°and 40°.This temperature-pressure coupling reduces rock-breaking threshold pressure by 15%-75%for elastic moduli of 40-80 GPa,with maximum erosion stress peaking at a dimensionless spray distance of 9 and jet angles of 15°-20°.When the overlap region decreases,the area affected by the temperature and pressure fields increases,leading to an increase in the rock-breaking area.It is important to note that reducing the rock-breaking threshold pressure and increasing the rock-breaking area are mutually exclusive objectives.It is necessary to optimize the design of the spray distance and jet angle according to the on-site rock-breaking requirements.
基金by the foundation of National Key Laboratory of Science and Technology on Aerodynamic Design and Research(Grant 614220119040101)the National Natural Science Foundation of China(Grants 91852115 and 12072282)+1 种基金the National Numerical Wind tunnel Project(Grant NNW2018-ZT1B01)the Seed Foundation of Innovation and Creation for Graduate Student in Northwestern Polytechnical University(Grant CX2020195).
文摘The placement of pressure taps on the surface of the wind tunnel test model is an important means toobtain the surface pressure distribution.However,limited by space location and experimental cost,it isdifficult to arrange enough pressure measuring taps on the surface of complex models to obtain completepressure distribution information,thus it is impossible to obtain accurate lift and moment characteristicsthrough integration.The paper proposes a refined reconstruction method of airfoil surface pressure basedon compressed sensing,which can reconstruct the pressure distribution with high precision with lesspressure measurement data.Tests on typical airfoil subsonic flow around flow show that the accuracyof lift and moment after the pressure integration reconstructed by 4-8 measuring points can meet therequirements of the national military standard.The algorithm is robust to noise,and provides a new ideafor obtaining accurate force data from sparse surface pressure tests in engineering.
文摘According to the ship observation data over the South Indian Ocean during 1950 1995, taking 1°× 1° and 5°× 5°grid, the characteristics and variation rule of wind are analyzed. Through analyzing the chart of isopleths of the monthly elements, the conclusion that the seasonal variation of the wind field over the South Indian Ocean is less remarkable than that in the oceans of the Northern Hemisphere is got. The seasonal variation of the wind field is also obvious in this region, but the seasonal difference is little. The wind in winter is stronger than in summer, correspondingly, the average wind speed is higher, and the frequencies of gale of forces ≥ 6 and 8 are also higher. The north of 10°S is a monsoon area; Southeast wind prevails all over the year in the rest of the trade wind area; Westerly wind dominates in the south of 40°S. This paper provides specific data of wind field and variation for ship ocean transportation, ocean-going visits and scientific experiment.
文摘A streamwise vorticity equation is derived in generalized natural coordinates. This equation reveals that the total change and local change of the streamwise vorticity are mainly determined by the curvature of streamline, unsteady feature of streamline and magnitude of velocity. This equation enables the study of mesoscale or small-scale systems since the term associated with pressure gradient force in the original vorticity equation is replaced by terms associated with streamlines and wind speed. With this modification the wind field rather than the pressure field is used in the calculation considering that 1) the pressure field is to adapt wind field. 2) Smoother and more consecutive streamline pattern is easier to obtain either by data analysis or by the numerical simulation. From this sense, this present study suggests the application of this equation to studying the evolution of severe storm system as well as other simplified cases. Key words Wind field instead of pressure field - Generalized natural coordinate - Streamwise vorticity This work was supported by the project on the study of the formative mechanism and predictive theory of the significant climate and weather disaster in China under Grant G 1998040907 and by the key project on the Dynamic Study of Severe Mesoscale Covective Systems sponsored by the National Natural Science Foundation of China under Grant No. 49735180.
基金Project(2013CB632305)supported by the National Basic Research Program of ChinaProject(51375108)supported by the National Natural Science Foundation of China
文摘A line contact model of elastic coated solids is presented based on the influence coefficients(ICs) of surface displacement and stresses of coating-substrate system and the traditional contact model. The ICs of displacement and stresses are obtained from their corresponding frequency response functions(FRF) by using a conversion method based on fast Fourier transformation(FFT). The contact pressure and the stress field in the subsurface are obtained by employing conjugate gradient method(CGM) and discrete convolution fast Fourier transformation(DC-FFT). Comparison of the contact pressure and subsurface stresses obtained by the numerical method with the exact analytical solutions for Hertz contact is conducted, and the results show that the numerical solution has a very high accuracy and verify the validity of the contact model. The effect of the stiffness and thickness of coatings is further numerically studied. The result shows that the effects on contact pressure and contact width are opposite for hard and soft coatings and are intensified with the increase of coating thickness; the locations of crack initiation and propagation are different for soft and hard coatings; the risk of cracks and delaminations of coatings can be brought down by improving the lubrication condition or optimizing the non-dimensional parameter h/bh. This research offers a tool to numerically analyze the problem of elastic coated solids in line contact and make the blindness and randomness of trial-type coating design less.
文摘AIM：To compare the corneal biomechanical properties difference by ocular response analyzer（ORA） in normal tension glaucoma（NTG） patients with different visual field（VF） progression speed. METHODS：NTG patients with well-controlled Goldmann applanation tonometer（GAT） who routinely consulted Kitasato University Hospital Glaucoma Department between January 2010 and February 2014 were enrolled.GAT and ORA parameters including corneal compensated intraocular pressure（lOPcc）,Goldmann estimated intraocular pressure（lOPg）,corneal hysteresis（CH）,corneal resistance factor（CRF） were recorded.VF was tested by Swedish interactive threshold algorithm（SITA）-standard 30-2 fields.All patients underwent VF measurement regularly and GAT did not exceed 15 mm Hg at any time during the 3y follow up.Patients were divided into four groups according to VF change over 3y,and ORA findings were compared between the upper 25th percentile group（slow progression group） and the lower 25th percentile group（rapid progression group）.RESULTS：Eighty-two eyes of 56 patients were studied.There were 21 eyes（21 patients） each in rapid and slow progression groups respectively.GAT,lOPcc,lOPg,CH,CRF were 12.1＋1.4 mm Hg,15.8±1.8 mm Hg,12.8±2.0 mm Hg,8.4±1.1 mm Hg,7.9±1.3 mm Hg respectively in rapid progression group and 11.5±1.3 mm Hg,13.5±2.1 mm Hg,11.2±1.6 mm Hg,9.3±1.1 mm Hg,8.2±0.9 mm Hg respectively in slow progression group（P=0.214,〈0.001,0.007,0.017,0.413,respectively）.In bivariate correlation analysis,lOPcc,lOPcc-GAT and CH were significant correlated with m△MD（r =-0.292,-0.312,0.228 respectively,P =0.008,0.004,0.039 respectively）.CONCLUSION：Relatively rapid VF progression occurred in NTG patients whose lOPcc are rather high,CH are rather low and the difference between lOPcc and GAT are relatively large.Higher lOPcc and lower CH are associated with VF progression in NTG patients.This study suggests that GAT measures might underestimate the IOP in such patients.
