[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,...[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.展开更多
As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting ...As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting surface(IRS)is introduced into its signal propagation path.Consequently,an IRSaided PSR is concerned for a point-to-point(P2P)data link,where both the single-antenna and multiantenna deployments on the receiver are discussed.We aim at maximizing the capacity of the concerned P2P data-link by jointly optimizing the passive beamforming of IRS and the splitting ratio of PSR,either in single-antenna or multi-antenna case.However,owing to the coupling of multiple variables,the optimization problems are non-convex and challenging,especially in the later multi-antenna case.The proposed alternating-approximating algorithm(A-A),aided by semi-definite relaxation(SDR)and successive convex approximation(SCA)methods,etc.,successfully overcomes these challenges.We compare the IRS-aided PSR system that optimized by our proposed algorithm to the systems without IRS or PSR,and the systems without joint optimization.The simulation results show that our proposal has a better performance.展开更多
A power amplifier MIC with power combining based on AlGaN/GaN HEMTs was fabricated and measured. The amplifier consists of four 10 × 120μm transistors. A Wilkinson splitters and combining were used to divide and...A power amplifier MIC with power combining based on AlGaN/GaN HEMTs was fabricated and measured. The amplifier consists of four 10 × 120μm transistors. A Wilkinson splitters and combining were used to divide and combine the power. By biasing the amplifier at VDS = 40V, IDS = 0.9A, a maximum CW output power of 41.4dBm with a maximum power added efficiency （PAE） of 32.54% and a power combine efficiency of 69% was achieved at 5.4GHz.展开更多
Intelligent reflecting surface(IRS) is regarded as a promising technology because it can achieve higher passive beamforming gain. In particular, the IRS assisted simultaneous wireless information and power transfer(SW...Intelligent reflecting surface(IRS) is regarded as a promising technology because it can achieve higher passive beamforming gain. In particular, the IRS assisted simultaneous wireless information and power transfer(SWIPT) system can make the information decoding receivers(IDRs) have a higher signal-to-noise ratio(SNR), and the energy harvesting receivers(EHRs) have the guarantee of minimum harvested energy threshold. Motivated by the above,in this paper, we use the power splitting(PS) at the user and introduce artificial noise(AN) into the access point(AP), so that the user in system can harvest energy and decode information simultaneously,further improve the security of user. We jointly optimize the beamforming matrix at AP, the reflection phase shift at IRS and the PS ratio, in order to maximize the user’s achievable secrecy rate, subject to the user’s minimum harvested energy threshold and AP’s transmission power. Due to the introduction of PS ratio, the coupling between variables is increased,and the complexity of the problem is significantly increased. Furthermore, the problem is non-convex, so we propose an efficient algorithm based on Taylor Formula, semi-definite relaxation(SDR) and alternating optimization(AO) to get the solution. Numerical results show that the proposed IRS-SWIPT system with PS and AN achieves significant performance improvement compared with other benchmark scheme.展开更多
The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and meth...The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and methane to syngas in the temperature range 900–1050 °C. Experiments were carried out with different ceria shapes via two-step redox cycling composed of endothermic partial reduction of ceria with methane and complete exothermic re-oxidation of reduced ceria with H2 O/CO2 at the same operating temperature, thereby demonstrating the capability to operate the cycle isothermally. A parametric study considering different ceria macrostructure variants(ceria packed powder, ceria packed powder mixed with inert Al2 O3 particles, and ceria reticulated porous foam) and operating parameters(methane flow-rate, reduction temperature, or sintering temperature) was conducted in order to unravel their impact on the bed-averaged oxygen non-stoichiometry(δ), syngas yield, methane conversion, and solar reactor performance. The ceria cycling stability was also experimentally investigated to demonstrate repeatable syngas production by alternating the flow between CH4 and H2 O(or CO2). A decrease in sintering temperature of the ceria foam was beneficial for increasing syngas selectivity, methane conversion,and reactor performance. Increasing both CH4 concentration and reduction temperature enhanced δ with the maximum value up to 0.41 but concomitantly favored CH4 cracking reaction. The ceria reticulated porous foam showed better performance in terms of effective heat transfer, due to volumetric absorption of concentrated solar radiation and uniform heating with lower solar power consumption, thereby promoting the solar-to-fuel energy conversion efficiency that reached up to 5.60%. The energy upgrade factor achieved during cycle was up to 1.19. Stable patterns in the δ and syngas yield for consecutive cycles with the ceria foam validated material performance stability.展开更多
With the continuous escalation of modern war,soldiers need to transport more combat materials to the combat area.The limited load-bearing capacity of soldiers seriously restricts their carrying capacity and mobility.I...With the continuous escalation of modern war,soldiers need to transport more combat materials to the combat area.The limited load-bearing capacity of soldiers seriously restricts their carrying capacity and mobility.It is urgent to develop a power-assisted exoskeleton robot suitable for individual combat.In the past,most power-assisted exoskeleton robots were driven by motors.This driving method has an excellent power-assisted effect,but the endurance is often insufficient.In view of this shortcoming,this study designed an ankle exoskeleton robot based on an active-passive combined drive through simulation analysis of human motion.It used OpenSim software to simulate and verify that the addition of spring could achieve a good effect.At the same time,according to the gait characteristics of the human body,the gait planning of an exoskeleton robot was carried out.Afterwards,theoretical analysis explained that the cooperation among spring,motor and wearer could be realized in this gait.Finally,the assisting ability and driving coordination of the active-passive combination driven ankle exoskeleton robot were verified through experiments.展开更多
In modern industrial applications,ensuring the reliability of mechanical fittings is critical for maintaining operational safety and efficiency,particularly in power grid systems where split pins serve a pivotal role ...In modern industrial applications,ensuring the reliability of mechanical fittings is critical for maintaining operational safety and efficiency,particularly in power grid systems where split pins serve a pivotal role despite being susceptible to environmental degradation and failure.Existing UAV-based inspection systems are hampered by a low representation of split pin elements and complex backgrounds,leading to challenges in accurate fault detection and timely maintenance.To address this pressing issue,our study proposes an innovative fault detection method for split pins.The approach employs a three-step process:first,cropping operations are used to accurately isolate the fittings containing split pins;second,super-resolution reconstruction is applied to enhance image clarity and detail;and finally,an improved YOLOv8 network,augmented with inner-shape IoU and local window attention mechanisms,is utilized to refine local feature extraction and annotation accuracy.Experimental evaluations on a split pin defect dataset demonstrate robust performance,achieving an accuracy rate of 72.1%and a mean average precision(mAP)of 67.7%,thereby validating the method’s effectiveness under challenging conditions.The proposed approach contributes to the field by specifically targeting the challenges associated with split pin detection in UAV-based inspections,offering a practically applicable and reliably precise method.展开更多
The phase and frequency locking of microwave, millimeter wave power combining were analysed and summarized in an all-round way. The master/slave phase locking of cavity oscillators, the peer phase locking of mutually ...The phase and frequency locking of microwave, millimeter wave power combining were analysed and summarized in an all-round way. The master/slave phase locking of cavity oscillators, the peer phase locking of mutually coupled oscillators, and the peer phase locking of ring-connected multiple oscillators were investigated. The results of numerical calculations, and the relations of phase to phase locking model and oscillator parameters were given. And the cavity and space power combining aspects for microwave and millimeter wave were presented.展开更多
The performance of symbiotic radio(SR)networks can be improved by equipping secondary transmitters(STs)with intelligent reflecting surfaces(IRSs).Since the IRS power consumption is a non-negligible issue for STs,we co...The performance of symbiotic radio(SR)networks can be improved by equipping secondary transmitters(STs)with intelligent reflecting surfaces(IRSs).Since the IRS power consumption is a non-negligible issue for STs,we consider an IRS assisted SR system where the IRS operates under power splitting(PS)mode.We aim at minimizing the IRS power consumption for the ST under the quality of service constraints for both primary and secondary transmissions by optimizing the transmit beamforming,the reflect beamforming and the PS factor.The optimization problem is non-convex.To tackle it,an algorithm is proposed by employing the block coordinate descent,semidefinite relaxation and alternating direction method of multipliers techniques.Simulation results demonstrate the efficiency and effectiveness of the proposed algorithm.展开更多
The deformation compatibility equations and the torque balance equations of star gearing with three branches have been found based on the characteristic that the system composes a closed-loop of power flow. In conside...The deformation compatibility equations and the torque balance equations of star gearing with three branches have been found based on the characteristic that the system composes a closed-loop of power flow. In consideration of the parts manufacturing errors, assembly errors, bearing stiffness and float, the power splitting rate of each star gear and the system were calculated by using the theory of equivalent mesh error. The effects of the errors, float and the bearing stiffness on power splitting were studied. The study provides a useful theoretical guideline for the design of star gearing.展开更多
In order to enhance the off-peak performance of gas turbine combined cycle(GTCC)units,a novel collaborative power generation system(CPG)was proposed.During off-peak operation periods,the remaining power of the GTCC wa...In order to enhance the off-peak performance of gas turbine combined cycle(GTCC)units,a novel collaborative power generation system(CPG)was proposed.During off-peak operation periods,the remaining power of the GTCC was used to drive the adiabatic compressed air energy storage(ACAES),while the intake air of the GTCC was heated by the compression heat of theACAES.Based on a 67.3MW GTCC,under specific demand load distribution,a CPG system and a benchmark system(BS)were designed,both of which used 9.388% of the GTCC output power to drive the ACAES.The performance of the CPG and the BS without intake air heating was compared.The results show that the load rate of the GTCC in the CPG system during off-peak periods is significantly enhanced,and the average operating efficiency of the GTCC is increased by 1.19 percentage points.However,in the BS system,due to the single collaborativemethod of load shifting,the GTCC operative efficiency is almost increased by 1.00 percentage points under different ambient temperatures.In a roundtrip cycle at an ambient temperature of 288.15K,the systemefficiency of the CPG reaches 0.5010,which is 0.62 percentage points higher than the operative efficiency of 0.4948 in the standalone GTCC;while the system efficiency of the BS is slightly inferior to that of the standalone GTCC.The findings confirm the technical feasibility and performance improvement of the ACAES-GTCC collaborative power generation system.展开更多
Coherent combination of laser beam is an important and challenging area of high power laser science. And how to evaluate the high power laser by coherent beam combination is a new research spot. Formulas for the radia...Coherent combination of laser beam is an important and challenging area of high power laser science. And how to evaluate the high power laser by coherent beam combination is a new research spot. Formulas for the radiated intensity distributions of coherent combined Gaussian beam array are derived via Fraunhofer scalar diffraction model by utilizing representations of the cross-spectral density of the far field. Effects of beam array numbers and separate distances etc. on far field radiated profiles are shown and analyzed. A new conception named power in the bucket of the main lobe (PIMm) is advanced to measure the beam quality of combined beams. This evaluation method is useful for efficiently determining the peak irradiance and power in the bucket for single emitting apertures of general shape.展开更多
A microwave power-combining system composed of two Panasonic 2M244-M1 magnetrons based on master–slave injection-locking is demonstrated in this paper. The principle of master–slave injection-locking and the locking...A microwave power-combining system composed of two Panasonic 2M244-M1 magnetrons based on master–slave injection-locking is demonstrated in this paper. The principle of master–slave injection-locking and the locking condition are theoretical analyzed. Experimental results are consistent with the theoretical analysis and the experimental combined efficiency is higher than 96%. Compared with the external-injection-locked system, the power-combining based on the master–slave injection-locking magnetron is superior by taking out the external solid-state driver and the real-time phase control system. Thus, this power-combining system has great potential for obtaining a high efficiency, high stability, low cost, and high power microwave source.展开更多
To improve the accuracy and speed in cycle-accurate power estimation, this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model. By analyzing the power distribution and intern...To improve the accuracy and speed in cycle-accurate power estimation, this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model. By analyzing the power distribution and internal node state, we find the deficiency of only using port information. Then, we define the gate level number computing method and the concept of slice, and propose using slice analysis to distill switching density as coefficients in a special circuit stage and participate in Bayesian inference with port information. Experiments show that this method can reduce the power-per-cycle estimation error by 21.9% and the root mean square error by 25.0% compared with the original model, and maintain a 700 ＋ speedup compared with the existing gate-level power analysis technique.展开更多
This paper briefs the configuration and performance of large size gas turbines and their composed combined cycle power plants designed and produced by four large renown gas turbine manufacturing firms in the world, pr...This paper briefs the configuration and performance of large size gas turbines and their composed combined cycle power plants designed and produced by four large renown gas turbine manufacturing firms in the world, providing reference for the relevant sectors and enterprises in importing advanced gas turbines and technologies.展开更多
Iran’s removing subsidy from energy carrier in four years ago leads to spike electricity price dramatically. This abrupt change increases the interest on distributed generation (DG) because of its several benefits su...Iran’s removing subsidy from energy carrier in four years ago leads to spike electricity price dramatically. This abrupt change increases the interest on distributed generation (DG) because of its several benefits such as lower electricity generation price. In Iran among all type of DGs, because of wide natural gas network infrastructure and several incentives that government legislated to support combined cooling, heat and power (CCHP) investors, this type of technology is more prevalent in comparison with other technologies. Between existing CCHP technologies, certain economic choices are to be taken into account. For different buildings with different load curves, suitable size and operation of CCHP should be calculated to make the project more feasible. If CCHP does not well suited for a position, then the whole energy efficiency would be plunged significantly. In this paper, a model to find the optimal size and operation of CCHP and auxiliary boiler for any users is proposed by considering an integrated view of electricity and natural gas network using GAMS software. Then this method is applying for a hospital in Tehran as a real case study. Finally, by applying COMFAR III software, useful financial parameters and sensitivity analysis are calculated.展开更多
In order to identify all the appropriate system schemes for the compound split systems formed primarily with a four-port mechanical power split device, power transmission characteristics of the compound split systems ...In order to identify all the appropriate system schemes for the compound split systems formed primarily with a four-port mechanical power split device, power transmission characteristics of the compound split systems was analyzed. Considering the structural symmetry and according to the different connection arrangement of the four ports, compound split system was classified into four types. Using black-box modeling method, the generalized models of the speed ratio, the torque ratio and the power split ratio were established. Moreover, a semi-invert diagram was used to distin- guish the different schemes in each type. The characteristics of the speed ratio, the torque ratio and the power split ratio in each domain were also analyzed and compared. Through the semi-invert dia- gram, a selection method based on the rated-power speed ranges in different schemes was presented and all suitable compound split systems were identified, which can be used as references for the scheme selection of this kind of continuously variable power split transmission.展开更多
Power grid construction projects are distinguished by their wide variety,high investment,long payback period,and close relation to national development and human welfare.To improve the investment accuracy in such proj...Power grid construction projects are distinguished by their wide variety,high investment,long payback period,and close relation to national development and human welfare.To improve the investment accuracy in such projects and effectively prevent investment risks,this paper proposes an investment optimization decision-making method for multiple power grid construction projects under a certain investment scale.Firstly,an in-depth analysis of the characteristics and development requirements of China’s power grid projects was performed.Thereafter,the time sequence and holographic method was adopted to conduct multi-dimensional,multi-perspective risk assessment of different parts of power grid projects,and a holographic risk assessment index system was developed.Moreover,an investment decision model considering the comprehensive risk based on combination weighting was developed according to the output and input of power grid construction projects.A new combination weighting optimization method that takes into account the investment willingness of enterprises was designed to improve the current weighting evaluation methods.Finally,the validity and applicability of the proposed evaluation method were verified by case examples.展开更多
To improve the overall thermal efficiency of the organic Rankine cycle（ ORC）, a simulation study was carried out for a combined heat and power（ CHP） system, using the Redlich-Kuang-Soave（ RKS） equation of state....To improve the overall thermal efficiency of the organic Rankine cycle（ ORC）, a simulation study was carried out for a combined heat and power（ CHP） system, using the Redlich-Kuang-Soave（ RKS） equation of state. In the system,R245 fa was selected as the working fluid. A scroll expander was modeled with empirical isentropic expansion efficiency.Plate heat exchangers were selected as the evaporator and the condenser, and detailed heat transfer models were programmed for both one-phase and two-phase regions. Simulations were carried out at seven different heat source temperatures（ 80,90, 100, 110, 120, 130, 140 ℃） in combination with eight different heat sink temperatures（ 20, 25, 30, 35, 40, 45, 50,55 ℃）. Results showthat in the ORC without an internal heat exchanger（ IHE）, the optimum cycle efficiencies are in the range of 7. 0% to 7. 3% when the temperature differences between the heat source and heat sink are in the range of 70 to90 ℃. Simulations on CHP reveal that domestic hot water can be produced when the heat sink inlet temperature is higher than40 ℃, and the corresponding exergy efficiency and overall thermal efficiency are 29% to 56% and 87% to 90% higher than those in the non-CHP ORC, respectively. It is found that the IHE has little effect on the improvement of work output and efficiencies for the CHP ORC.展开更多
Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification...Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification,the tooth profile modification is considered as time-varying gear backlash function acting along the line of action.Then the dynamic functions are solved by using Runge-Kutta numerical method.After analyzing the effect of tooth profile modification quantity( TPMQ) and relative tooth profile modification length( TPML) to the nonlinear dynamic characteristics of power split gear transmission,the following conclusions are drawn:1 The TPMQ of a certain stage transmission affects the vibration of its own stage more significantly than the other stage,and the coupling effect between two stages can be ignored usually in the modification design;2 If the first stage TPMLs are less than 0.3,the influence of the first stage TPMLs to the first stage transmission vibration is much more greatly than the influence of the second stage TPMLs to the first stage transmission vibration,or else both the first and second stage TPMLs affect the first stage transmission vibration largely.The same is true for the second stage TPMLs,and the cutoff value is 0.2;3 The TPMQ affects the vibration of power split gear transmission system more principally than the TPML,and should be top-priority in the modification design.展开更多
基金National Key Research and Development Program of China(2022YFF0707602)National Natural Science Foundation of China(62471097,62471115,62471101)National Natural Science Foundation of Sichuan(2025ZNSFSC0537)。
文摘[Background]Traveling-wave tubes(TWTs)are widely applied in radar,imaging,and military systems owing to their excellent amplification characteristics.Miniaturization and integration are critical to the future of TWTs,with multi-channel slow-wave structures(SWSs)forming the foundation for their realization in high-power vacuum electronic devices.[Purpose]To provide design insights for multi-channel TWTs and simultaneously enhance their output power,a W-band folded-waveguide TWT with dual electron beams and H-plane power combining was proposed.[Methods]Three-dimensional electromagnetic simulations in CST were conducted to verify the highfrequency characteristics,electric field distribution,and amplification performance of the proposed SWS,thereby confirming the validity of the design.[Results]Results indicate that the designed TWT achieves a transmission bandwidth of 10 GHz.With an electron beam voltage of 17.9 kV and a current of 0.35 A,the output power reaches 450 W at 94 GHz,corresponding to an efficiency of 7.18%and a gain of 23.5 dB.Moreover,under fixed beam voltage and current,the TWT delivers over 200 W output power across 91–99 GHz,with a 3 dB bandwidth of 91–98.5 GHz.The particle voltage distribution after modulation further validates the mode analysis.[Conclusions]These results demonstrate the feasibility of compact dual-beam power-combining structures and provide useful guidance for the design of future multi-channel TWTs.
基金supported by National Key R&D Program of China with Grant number 2019YFB1803400in part by Sichuan Science and Technology Program under Grant 2024NSFSC0472。
文摘As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting surface(IRS)is introduced into its signal propagation path.Consequently,an IRSaided PSR is concerned for a point-to-point(P2P)data link,where both the single-antenna and multiantenna deployments on the receiver are discussed.We aim at maximizing the capacity of the concerned P2P data-link by jointly optimizing the passive beamforming of IRS and the splitting ratio of PSR,either in single-antenna or multi-antenna case.However,owing to the coupling of multiple variables,the optimization problems are non-convex and challenging,especially in the later multi-antenna case.The proposed alternating-approximating algorithm(A-A),aided by semi-definite relaxation(SDR)and successive convex approximation(SCA)methods,etc.,successfully overcomes these challenges.We compare the IRS-aided PSR system that optimized by our proposed algorithm to the systems without IRS or PSR,and the systems without joint optimization.The simulation results show that our proposal has a better performance.
文摘A power amplifier MIC with power combining based on AlGaN/GaN HEMTs was fabricated and measured. The amplifier consists of four 10 × 120μm transistors. A Wilkinson splitters and combining were used to divide and combine the power. By biasing the amplifier at VDS = 40V, IDS = 0.9A, a maximum CW output power of 41.4dBm with a maximum power added efficiency （PAE） of 32.54% and a power combine efficiency of 69% was achieved at 5.4GHz.
基金supported by the National Natural Science Foundation of China (No. 61971190)the Fundamental Research Funds for the Central Universities (No. 2019 MS089)+1 种基金the Hebei Province Natural Science Foundation (No. F2016502062)the Beijing Natural Science Foundation (No. 4164101)。
文摘Intelligent reflecting surface(IRS) is regarded as a promising technology because it can achieve higher passive beamforming gain. In particular, the IRS assisted simultaneous wireless information and power transfer(SWIPT) system can make the information decoding receivers(IDRs) have a higher signal-to-noise ratio(SNR), and the energy harvesting receivers(EHRs) have the guarantee of minimum harvested energy threshold. Motivated by the above,in this paper, we use the power splitting(PS) at the user and introduce artificial noise(AN) into the access point(AP), so that the user in system can harvest energy and decode information simultaneously,further improve the security of user. We jointly optimize the beamforming matrix at AP, the reflection phase shift at IRS and the PS ratio, in order to maximize the user’s achievable secrecy rate, subject to the user’s minimum harvested energy threshold and AP’s transmission power. Due to the introduction of PS ratio, the coupling between variables is increased,and the complexity of the problem is significantly increased. Furthermore, the problem is non-convex, so we propose an efficient algorithm based on Taylor Formula, semi-definite relaxation(SDR) and alternating optimization(AO) to get the solution. Numerical results show that the proposed IRS-SWIPT system with PS and AN achieves significant performance improvement compared with other benchmark scheme.
基金The King Mongkut’s Institute of Technology Ladkrabang(KMITL),Thailandthe Franco-Thai scholarship program。
文摘The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and methane to syngas in the temperature range 900–1050 °C. Experiments were carried out with different ceria shapes via two-step redox cycling composed of endothermic partial reduction of ceria with methane and complete exothermic re-oxidation of reduced ceria with H2 O/CO2 at the same operating temperature, thereby demonstrating the capability to operate the cycle isothermally. A parametric study considering different ceria macrostructure variants(ceria packed powder, ceria packed powder mixed with inert Al2 O3 particles, and ceria reticulated porous foam) and operating parameters(methane flow-rate, reduction temperature, or sintering temperature) was conducted in order to unravel their impact on the bed-averaged oxygen non-stoichiometry(δ), syngas yield, methane conversion, and solar reactor performance. The ceria cycling stability was also experimentally investigated to demonstrate repeatable syngas production by alternating the flow between CH4 and H2 O(or CO2). A decrease in sintering temperature of the ceria foam was beneficial for increasing syngas selectivity, methane conversion,and reactor performance. Increasing both CH4 concentration and reduction temperature enhanced δ with the maximum value up to 0.41 but concomitantly favored CH4 cracking reaction. The ceria reticulated porous foam showed better performance in terms of effective heat transfer, due to volumetric absorption of concentrated solar radiation and uniform heating with lower solar power consumption, thereby promoting the solar-to-fuel energy conversion efficiency that reached up to 5.60%. The energy upgrade factor achieved during cycle was up to 1.19. Stable patterns in the δ and syngas yield for consecutive cycles with the ceria foam validated material performance stability.
基金the National Natural Science Foundation of China(No.52075264)。
文摘With the continuous escalation of modern war,soldiers need to transport more combat materials to the combat area.The limited load-bearing capacity of soldiers seriously restricts their carrying capacity and mobility.It is urgent to develop a power-assisted exoskeleton robot suitable for individual combat.In the past,most power-assisted exoskeleton robots were driven by motors.This driving method has an excellent power-assisted effect,but the endurance is often insufficient.In view of this shortcoming,this study designed an ankle exoskeleton robot based on an active-passive combined drive through simulation analysis of human motion.It used OpenSim software to simulate and verify that the addition of spring could achieve a good effect.At the same time,according to the gait characteristics of the human body,the gait planning of an exoskeleton robot was carried out.Afterwards,theoretical analysis explained that the cooperation among spring,motor and wearer could be realized in this gait.Finally,the assisting ability and driving coordination of the active-passive combination driven ankle exoskeleton robot were verified through experiments.
基金Fundamental Research Funds for the Central Universities(2023MS134)。
文摘In modern industrial applications,ensuring the reliability of mechanical fittings is critical for maintaining operational safety and efficiency,particularly in power grid systems where split pins serve a pivotal role despite being susceptible to environmental degradation and failure.Existing UAV-based inspection systems are hampered by a low representation of split pin elements and complex backgrounds,leading to challenges in accurate fault detection and timely maintenance.To address this pressing issue,our study proposes an innovative fault detection method for split pins.The approach employs a three-step process:first,cropping operations are used to accurately isolate the fittings containing split pins;second,super-resolution reconstruction is applied to enhance image clarity and detail;and finally,an improved YOLOv8 network,augmented with inner-shape IoU and local window attention mechanisms,is utilized to refine local feature extraction and annotation accuracy.Experimental evaluations on a split pin defect dataset demonstrate robust performance,achieving an accuracy rate of 72.1%and a mean average precision(mAP)of 67.7%,thereby validating the method’s effectiveness under challenging conditions.The proposed approach contributes to the field by specifically targeting the challenges associated with split pin detection in UAV-based inspections,offering a practically applicable and reliably precise method.
基金Supported by the National Natural Science Foundation of China
文摘The phase and frequency locking of microwave, millimeter wave power combining were analysed and summarized in an all-round way. The master/slave phase locking of cavity oscillators, the peer phase locking of mutually coupled oscillators, and the peer phase locking of ring-connected multiple oscillators were investigated. The results of numerical calculations, and the relations of phase to phase locking model and oscillator parameters were given. And the cavity and space power combining aspects for microwave and millimeter wave were presented.
基金supported by the Fundamental Research Funds for the Central Universities(No.FRF-TP-20-106A1)。
文摘The performance of symbiotic radio(SR)networks can be improved by equipping secondary transmitters(STs)with intelligent reflecting surfaces(IRSs).Since the IRS power consumption is a non-negligible issue for STs,we consider an IRS assisted SR system where the IRS operates under power splitting(PS)mode.We aim at minimizing the IRS power consumption for the ST under the quality of service constraints for both primary and secondary transmissions by optimizing the transmit beamforming,the reflect beamforming and the PS factor.The optimization problem is non-convex.To tackle it,an algorithm is proposed by employing the block coordinate descent,semidefinite relaxation and alternating direction method of multipliers techniques.Simulation results demonstrate the efficiency and effectiveness of the proposed algorithm.
基金supported by the Natural Science Foundation of China (51175423)
文摘The deformation compatibility equations and the torque balance equations of star gearing with three branches have been found based on the characteristic that the system composes a closed-loop of power flow. In consideration of the parts manufacturing errors, assembly errors, bearing stiffness and float, the power splitting rate of each star gear and the system were calculated by using the theory of equivalent mesh error. The effects of the errors, float and the bearing stiffness on power splitting were studied. The study provides a useful theoretical guideline for the design of star gearing.
文摘In order to enhance the off-peak performance of gas turbine combined cycle(GTCC)units,a novel collaborative power generation system(CPG)was proposed.During off-peak operation periods,the remaining power of the GTCC was used to drive the adiabatic compressed air energy storage(ACAES),while the intake air of the GTCC was heated by the compression heat of theACAES.Based on a 67.3MW GTCC,under specific demand load distribution,a CPG system and a benchmark system(BS)were designed,both of which used 9.388% of the GTCC output power to drive the ACAES.The performance of the CPG and the BS without intake air heating was compared.The results show that the load rate of the GTCC in the CPG system during off-peak periods is significantly enhanced,and the average operating efficiency of the GTCC is increased by 1.19 percentage points.However,in the BS system,due to the single collaborativemethod of load shifting,the GTCC operative efficiency is almost increased by 1.00 percentage points under different ambient temperatures.In a roundtrip cycle at an ambient temperature of 288.15K,the systemefficiency of the CPG reaches 0.5010,which is 0.62 percentage points higher than the operative efficiency of 0.4948 in the standalone GTCC;while the system efficiency of the BS is slightly inferior to that of the standalone GTCC.The findings confirm the technical feasibility and performance improvement of the ACAES-GTCC collaborative power generation system.
文摘Coherent combination of laser beam is an important and challenging area of high power laser science. And how to evaluate the high power laser by coherent beam combination is a new research spot. Formulas for the radiated intensity distributions of coherent combined Gaussian beam array are derived via Fraunhofer scalar diffraction model by utilizing representations of the cross-spectral density of the far field. Effects of beam array numbers and separate distances etc. on far field radiated profiles are shown and analyzed. A new conception named power in the bucket of the main lobe (PIMm) is advanced to measure the beam quality of combined beams. This evaluation method is useful for efficiently determining the peak irradiance and power in the bucket for single emitting apertures of general shape.
基金Project supported by the National Basic Research Program of China(Grant No.2013CB328902)the National Natural Science Foundation of China(Grant No.61501311)
文摘A microwave power-combining system composed of two Panasonic 2M244-M1 magnetrons based on master–slave injection-locking is demonstrated in this paper. The principle of master–slave injection-locking and the locking condition are theoretical analyzed. Experimental results are consistent with the theoretical analysis and the experimental combined efficiency is higher than 96%. Compared with the external-injection-locked system, the power-combining based on the master–slave injection-locking magnetron is superior by taking out the external solid-state driver and the real-time phase control system. Thus, this power-combining system has great potential for obtaining a high efficiency, high stability, low cost, and high power microwave source.
文摘To improve the accuracy and speed in cycle-accurate power estimation, this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model. By analyzing the power distribution and internal node state, we find the deficiency of only using port information. Then, we define the gate level number computing method and the concept of slice, and propose using slice analysis to distill switching density as coefficients in a special circuit stage and participate in Bayesian inference with port information. Experiments show that this method can reduce the power-per-cycle estimation error by 21.9% and the root mean square error by 25.0% compared with the original model, and maintain a 700 ＋ speedup compared with the existing gate-level power analysis technique.
文摘This paper briefs the configuration and performance of large size gas turbines and their composed combined cycle power plants designed and produced by four large renown gas turbine manufacturing firms in the world, providing reference for the relevant sectors and enterprises in importing advanced gas turbines and technologies.
文摘Iran’s removing subsidy from energy carrier in four years ago leads to spike electricity price dramatically. This abrupt change increases the interest on distributed generation (DG) because of its several benefits such as lower electricity generation price. In Iran among all type of DGs, because of wide natural gas network infrastructure and several incentives that government legislated to support combined cooling, heat and power (CCHP) investors, this type of technology is more prevalent in comparison with other technologies. Between existing CCHP technologies, certain economic choices are to be taken into account. For different buildings with different load curves, suitable size and operation of CCHP should be calculated to make the project more feasible. If CCHP does not well suited for a position, then the whole energy efficiency would be plunged significantly. In this paper, a model to find the optimal size and operation of CCHP and auxiliary boiler for any users is proposed by considering an integrated view of electricity and natural gas network using GAMS software. Then this method is applying for a hospital in Tehran as a real case study. Finally, by applying COMFAR III software, useful financial parameters and sensitivity analysis are calculated.
基金Supported by the Ministerial Level Advanced Research Foudation (111044)
文摘In order to identify all the appropriate system schemes for the compound split systems formed primarily with a four-port mechanical power split device, power transmission characteristics of the compound split systems was analyzed. Considering the structural symmetry and according to the different connection arrangement of the four ports, compound split system was classified into four types. Using black-box modeling method, the generalized models of the speed ratio, the torque ratio and the power split ratio were established. Moreover, a semi-invert diagram was used to distin- guish the different schemes in each type. The characteristics of the speed ratio, the torque ratio and the power split ratio in each domain were also analyzed and compared. Through the semi-invert dia- gram, a selection method based on the rated-power speed ranges in different schemes was presented and all suitable compound split systems were identified, which can be used as references for the scheme selection of this kind of continuously variable power split transmission.
基金supported by the State Grid Science and Technology Project (SGTYHT/16-JS-198)
文摘Power grid construction projects are distinguished by their wide variety,high investment,long payback period,and close relation to national development and human welfare.To improve the investment accuracy in such projects and effectively prevent investment risks,this paper proposes an investment optimization decision-making method for multiple power grid construction projects under a certain investment scale.Firstly,an in-depth analysis of the characteristics and development requirements of China’s power grid projects was performed.Thereafter,the time sequence and holographic method was adopted to conduct multi-dimensional,multi-perspective risk assessment of different parts of power grid projects,and a holographic risk assessment index system was developed.Moreover,an investment decision model considering the comprehensive risk based on combination weighting was developed according to the output and input of power grid construction projects.A new combination weighting optimization method that takes into account the investment willingness of enterprises was designed to improve the current weighting evaluation methods.Finally,the validity and applicability of the proposed evaluation method were verified by case examples.
基金Special Fund for IndustryUniversity and Research Cooperation(No.2011DFR61130)
文摘To improve the overall thermal efficiency of the organic Rankine cycle（ ORC）, a simulation study was carried out for a combined heat and power（ CHP） system, using the Redlich-Kuang-Soave（ RKS） equation of state. In the system,R245 fa was selected as the working fluid. A scroll expander was modeled with empirical isentropic expansion efficiency.Plate heat exchangers were selected as the evaporator and the condenser, and detailed heat transfer models were programmed for both one-phase and two-phase regions. Simulations were carried out at seven different heat source temperatures（ 80,90, 100, 110, 120, 130, 140 ℃） in combination with eight different heat sink temperatures（ 20, 25, 30, 35, 40, 45, 50,55 ℃）. Results showthat in the ORC without an internal heat exchanger（ IHE）, the optimum cycle efficiencies are in the range of 7. 0% to 7. 3% when the temperature differences between the heat source and heat sink are in the range of 70 to90 ℃. Simulations on CHP reveal that domestic hot water can be produced when the heat sink inlet temperature is higher than40 ℃, and the corresponding exergy efficiency and overall thermal efficiency are 29% to 56% and 87% to 90% higher than those in the non-CHP ORC, respectively. It is found that the IHE has little effect on the improvement of work output and efficiencies for the CHP ORC.
基金Sponsored by the National Natural Science Foundation of China(Grant No.2009AA04Z404)
文摘Based on Newton ' s second law,the bend-torsion-shaft coupling nonlinear dynamic model and equations of power split gear transmission system are established.According to the principle of tooth profile modification,the tooth profile modification is considered as time-varying gear backlash function acting along the line of action.Then the dynamic functions are solved by using Runge-Kutta numerical method.After analyzing the effect of tooth profile modification quantity( TPMQ) and relative tooth profile modification length( TPML) to the nonlinear dynamic characteristics of power split gear transmission,the following conclusions are drawn:1 The TPMQ of a certain stage transmission affects the vibration of its own stage more significantly than the other stage,and the coupling effect between two stages can be ignored usually in the modification design;2 If the first stage TPMLs are less than 0.3,the influence of the first stage TPMLs to the first stage transmission vibration is much more greatly than the influence of the second stage TPMLs to the first stage transmission vibration,or else both the first and second stage TPMLs affect the first stage transmission vibration largely.The same is true for the second stage TPMLs,and the cutoff value is 0.2;3 The TPMQ affects the vibration of power split gear transmission system more principally than the TPML,and should be top-priority in the modification design.
