Infrared spectrum is a general quantitation method which can be used to determine the concentration of a certain component in mixture.We proposed that it could also be used to determine the coreactant level of a react...Infrared spectrum is a general quantitation method which can be used to determine the concentration of a certain component in mixture.We proposed that it could also be used to determine the coreactant level of a reactive system.A two-part polyurethane film was used as a model system.The results showed that the height ratio of ring mode signal in urea and C—O signal in polyester polyol can be used to calculate the ratio of the two reactants.The assignments of the peaks were studied by in-situ reaction monitoring with moisture level changes and deuteration methods.The applicable conditions of this calibration curves were also discussed.展开更多
Background:The development of materials for cardiovascular surgery that would improve the effectiveness of surgical interventions remains an important task.Surgical intervention during the implantation of vascular pro...Background:The development of materials for cardiovascular surgery that would improve the effectiveness of surgical interventions remains an important task.Surgical intervention during the implantation of vascular prostheses and stents,and the body’s reaction to artificial materials,could lead to chronic inflammation,a local increase in the concentration of proinflammatory factors,and stimulation of unwanted tissue growth.The introduction of nonsteroidal anti-inflammatory drugs into implantable devices could be used to obtain vascular implants that do not induce inflammation and do not induce neointimal tissue outgrowth.Methods:The scaffolds were made by electrospinning from mixtures of polyurethane(PU)with diclofenac(DF).The kinetics of DF release from the scaffolds composed of 3%PU/10%HSA/3%DMSO/DF and 3%PU/DF were studied.The biocompatibility and anti-inflammatory effects of the obtained scaffolds on human gingival fibroblasts and umbilical vein endothelial cells were studied.Results:Both types of scaffolds are characterized by fast DF release.The viability of cells cultured on scaffolds is 2 times worse than that of cells cultured on plastic.The level of the proinflammatory cytokine IL-6 in the culture medium of cells cultured on DF-containing scaffolds was lower than that of cells cultured on scaffolds without DF.Conclusion:The introduction of DF into scaffolds minimizes the inflammation caused by cell reactions to an artificial material.展开更多
Polyurethane elastomers exhibit high dielectric constants owing to their polar groups,and can be used as energy storage capacitors.Energy storage depends not only on the dielectric constant but also on the dielectric ...Polyurethane elastomers exhibit high dielectric constants owing to their polar groups,and can be used as energy storage capacitors.Energy storage depends not only on the dielectric constant but also on the dielectric loss.However,the relationship between chain structure and dielectric properties is not yet clear.Ketal-containing crosslinked polyurethane elastomers were prepared using cyclic ketal diol as a chain extender.The effect of the soft segment length on the dielectric properties and energy storage was investigated.The cause of the change in the dipolar polarization with the soft segment length was analyzed.As the soft segment length increased,the hard-soft hydrogen bonding decreased,whereas the hard-hard hydrogen bonding increased.Under the action of an electric field,the polar bonds in the ketal-containing polyurethane elastomer overcome the hydrogen bonding between hard-soft segments to produce polarization;meanwhile,they also experience crankshaft motions to generate polarization.The former has a relatively high relaxation activation energy of approximately 10-20 k J·mol^(-1),resulting in a large dielectric loss.The latter has a relatively low relaxation activation energy,approximately 0.7-1.7 kJ·mol^(-1),leading to low dielectric loss.As a result,the dielectric constant showed a decreasing trend,and the dielectric loss gradually decreased.This study provides a theoretical foundation for improving the dielectric properties of polyurethane elastomers.展开更多
The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing...The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing applications has been limited by inherent challenges such as high electrical resistivity,poor aging resistance,and interfacial incompatibility.To address these limitations,hydroxyl-terminated polybutadiene(HTPB)-based polyurethane was chemically modified with acetylferrocene-polyaniline conductive moieties to enhance charge transport properties.Remarkably,this covalent functionalization endowed the resulting ferrocene-polyaniline hybrid polyurethane(FPHP)with a conductivity of2.33 n A at 1 V bias while preserving piezoresistive functionality.The FPHP demonstrated exceptional mechanical-electrical performance,achieving 254% elongation at break with strain-dependent gauge factors of 7.28(0%-12.5% strain,R^(2)=0.9504)and 19.66(12.5%-35.0% strain,R^(2)=0.9929).Further characterization revealed a rapid 0.60 s response time and stability over 3500 strain-release cycles at compression strain,underscoring its durability under repetitive loading.The FPHP sensor was capable of monitoring various human movements and recognizing writing signals.These advances establish a materials design paradigm for fabricating flexible sensors that synergistically integrate high deformability,tunable sensitivity,and robust operational stability,positioning FPHP as a promising candidate for next-generation wearable electronics and soft robotics.展开更多
Bio-based polyurethane foam has attracted increasing attentions due to eco-friendliness and fossil feedstock issues.However,the inherent flammability limits its application in different fields.Herein,we demonstrate a ...Bio-based polyurethane foam has attracted increasing attentions due to eco-friendliness and fossil feedstock issues.However,the inherent flammability limits its application in different fields.Herein,we demonstrate a green bio-based flame-retardant system to fabricate polyurethane foam composite with durable flame retardancy,smoke suppression,and thermal insulation property.In this system,the green bio-based polyol(VED)with good reactivity and compatibility plays a role of flame retardant and EG acts as a synergistic filler.As a result,the LOI value of foam composite increased to 30.5 vol.%and it achieved a V-0 rating in the UL-94 vertical burning test.Additionally,the peak heat release rate(pHRR)and the total smoke production(TSP)decreased by 66.1%and 63.4%,respectively.Furthermore,the foam composite maintained durable flame retardancy after accelerated thermal aging test,whose thermal-insulating property was maintained even after being treated in high-humidity environment with 85%R.H.for a week.This work provides a facile strategy for durable flame retardancy and long-term thermal insulation performance,and creates opportunities for the practical applications of bio-based foam composites.展开更多
In this study, to improve hemocompatibility of biomedical materials, a waterborne polyurethane （WPU）haepafin release coating system （WPU/heparin） is fabricated via simply blending biodegradable WPU emulsions with ...In this study, to improve hemocompatibility of biomedical materials, a waterborne polyurethane （WPU）haepafin release coating system （WPU/heparin） is fabricated via simply blending biodegradable WPU emulsions with heparin aqueous solutions. The surface compositions and hydrophilicity of these WPU/heparin blend coatings are characterized by attenuated total reflectance infrared spectroscopy （ATR-FTIR） and water contact angle measurements. These WPU/heparin blend coatings show effectively controlled release of heparin, as determined by the toluidine blue method. Furthermore, the biocompatibility and anticoagulant activity of these blend coatings are evaluated based on the protein adsorption, platelet adhesion, activated partial thromboplastin time （APTT）, thrombin time （TT）, hemolysis, and cytotoxicity. The results indicate that better hemocompatibility and cytocompatilibity are obtained due to blending heparin into this waterborne polyurethane. Thus, the WPU/heparin blend coating system is expected to be valuable for various biomedical applications.展开更多
As the important matrix material,epoxy resin has been widely used in the composites for various fields.On account of the poor toughness of epoxy resin limiting their suitability for advanced applications,considerable ...As the important matrix material,epoxy resin has been widely used in the composites for various fields.On account of the poor toughness of epoxy resin limiting their suitability for advanced applications,considerable interests have been conducted to modify the epoxy resin to meet the engineering requirements.In this study,the bio-based polyurethane(PU)modified resin was adopted to modify the pure bisphenol-A epoxy by blending method with various proportions.Aiming to illuminate the curing behavior,mechanical and thermal properties,the blended epoxy systems were characterized by viscosity-time analysis,dynamic mechanical analysis(DMA)at different frequencies and temperatures,mechanical tensile test,thermogravimetric analysis(TGA)and Fourier transform infrared(FT-IR)spectroscopy.The results indicated that the introduction of PU modified epoxy was found to significantly inhibit the viscosity growth rates especially when the content of PU modified epoxy resin is higher than 60%.Notwithstanding the dynamic modulus and T_(g)reduced with the increment of PU modified epoxy,remarkable increment on the elongation at break was found and the flexibility was greatly promoted with the introduction of PU modified epoxy.The proportion of PU modified epoxy in the blends should be put balance considerations to obtain optimal mechanical properties.TGA results and FTIR spectrum demonstrated that the addition of PU modified epoxy did not change the thermal decomposition mechanism and chemical reaction mechanism,but the addition of PU modified epoxy inhibits the curing reaction of epoxy resin by measured and calculated the damping temperature domainT from 35.7℃ to 48.9℃.展开更多
With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance an...With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance and durability.Polyurethane(PU)has been used in asphalt pavement engineering to enhance the durability and service life of asphalt pavement because of its excellent high-temperature performance,toughness,wear resistance,aging resistance and oil resistance.However,PU modified asphalt technology is still in the exploratory stage.The preparation,modification mechanism and working performances of PU modified asphalt need to be further clarified.Therefore,this paper summarized the research progress of PU modified asphalt and its mixture.The composition of PU modified asphalt was introduced.The addition methods of PU materials and preparation process parameters of the PU modified asphalt were determined.The modification mechanism of PU on asphalt was discussed.The effects of polyurethane on asphalt were analyzed and the road performances of its mixture were evaluated.Finally,the development tendency towards PU modified asphalt and its mixture were forecasted.展开更多
A poly(ethylene oxide) urethane and a model compound of hard segment(HD) were prepared in this study. Solid polymer electrolytes were got from the blends of polyurethane, HD and NaClO 4. The samples were characterized...A poly(ethylene oxide) urethane and a model compound of hard segment(HD) were prepared in this study. Solid polymer electrolytes were got from the blends of polyurethane, HD and NaClO 4. The samples were characterized by mean of FT IR and AFM. Effects of salt concentration on ion polymer interaction and further on morphologic structure of the composites were investigated and some interesting results were obtained. The results show that HD and concentration of NaClO 4 have an important effect on ion polymer interaction and morphologic structure of the complex. It is also found that in AFM pictures of the samples there is a transition point and ion polymer interaction of the polyurethane/salt systems play an extremely important role on morphologic structure.展开更多
Shotcrete is one of the common solutions for shallow sliding.It works by forming a protective layer with high strength and cementing the loose soil particles on the slope surface to prevent shallow sliding.However,the...Shotcrete is one of the common solutions for shallow sliding.It works by forming a protective layer with high strength and cementing the loose soil particles on the slope surface to prevent shallow sliding.However,the solidification time of conventional cement paste is long when shotcrete is used to treat cohesionless soil landslide.The idea of reinforcing slope with polyurethane solidified soil(i.e.,mixture of polyurethane and sand)was proposed.Model tests and finite element analysis were carried out to study the effectiveness of the proposed new method on the emergency treatment of cohesionless soil landslide.Surcharge loading on the crest of the slope was applied step by step until landslide was triggered so as to test and compare the stability and bearing capacity of slope models with different conditions.The simulated slope displacements were relatively close to the measured results,and the simulated slope deformation characteristics were in good agreement with the observed phenomena,which verifies the accuracy of the numerical method.Under the condition of surcharge loading on the crest of the slope,the unreinforced slope slid when the surcharge loading exceeded 30 k Pa,which presented a failure mode of local instability and collapse at the shallow layer of slope top.The reinforced slope remained stable even when the surcharge loading reached 48 k Pa.The displacement of the reinforced slope was reduced by more than 95%.Overall,this study verifies the effectiveness of polyurethane in the emergency treatment of cohesionless soil landslide and should have broad application prospects in the field of geological disasters concerning the safety of people's live.展开更多
Polyurethane foam,when used as a compressible layer in deep soft rock tunnels,offers a feasible solution to reduce the support pressure on the secondary lining.The foam spraying method using sprayed polyurethane mater...Polyurethane foam,when used as a compressible layer in deep soft rock tunnels,offers a feasible solution to reduce the support pressure on the secondary lining.The foam spraying method using sprayed polyurethane material is convenient for engineering applications;however,the compressive behaviour and feasibility of sprayed polyurethane material as a compressible layer remain unclear.To address this gap,this study conducts uniaxial compression tests and scanning electron microscope(SEM)tests to investigate the compressive behaviour of the rigid foams fabricated from a self-developed polyurethane spray material.A peridynamics model for the composite lining with a polyurethane compressible layer is then established.After validating the proposed method by comparison with two tests,a parametric study is carried out to investigate the damage evolution of the composite lining with a polyurethane compressible layer under various combinations of large deformations and compressible layer parameters.The results indicate that the polyurethane compressible layer effectively reduces the radial deformation and damage index of the secondary lining while increasing the damage susceptibility of the primary lining.The thickness of the polyurethane compressible layer significantly influences the prevention effect of large deformation-induced damage to the secondary lining within the density range of 50e100 kg/m^(3).In accordance with the experimental and simulation results,a simple,yet reasonable and convenient approach for determining the key parameters of the polyurethane compressible layer is proposed,along with a classification scheme for the parameters of the polyurethane compressible layer.展开更多
This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setti...This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setting time of polyurethane was further investigated using molecular dynamics simulations.Fourier transform infrared spectroscopy was also employed to systematically study the physical and chemical interactions between phosphate esters and polyurethane materials.The results demonstrate that a 1%concentration of phosphate ester provides the most effective retarding effect with minimal impact on the strength of polyurethane.When phosphate ester is added to the B component of the two-component polyurethane system,its interaction energy with component A decreases,as do the diffusion coefficient and aggregation degree of component B on the surface of component A.This reduction in interaction slows the setting time.Additionally,the addition of phosphate ester to polyurethane leads to the disappearance or weakening of functional groups,indicating competitive interactions within the phosphate ester components that inhibit the reaction rate.展开更多
Doping perylene diimide(PDI)into a polymer matrix is a simple strategy to prepare near-infrared(NIR)reflective materials,but the mechanical properties and NIR reflectance properties are significantly compromised due t...Doping perylene diimide(PDI)into a polymer matrix is a simple strategy to prepare near-infrared(NIR)reflective materials,but the mechanical properties and NIR reflectance properties are significantly compromised due to macro-phase separation.In this study,a novel polymer(denoted as PU-PDI)with intrinsic NIR reflective proper⁃ties was synthesized by covalent incorporation of PDI units into polyurethane chains.Its photophysical characteris⁃tics,mechanical property and NIR reflectance property are investigated in detail.The results show that covalent in⁃corporation reduces the severe aggregation of PDI units,thereby endows PU-PDI with excellent mechanical property.The elongation at break of PU-PDI can reach more than 700%,and the breaking strength is 34.11 MPa.Moreover,compared to the blending system,PU-PDI possesses enhanced NIR reflection ability due to the better dispersion of PDI units.展开更多
In this study,the polyurethanes(PU)were synthesized from 4,4′-methylene diphenyl diisocyanate and biobased ethoxylated castor oil or one to one mixture of ethoxylated and neat castor oil by direct mixing method.Utili...In this study,the polyurethanes(PU)were synthesized from 4,4′-methylene diphenyl diisocyanate and biobased ethoxylated castor oil or one to one mixture of ethoxylated and neat castor oil by direct mixing method.Utilization of ethoxylated castor oil increases tensile strength of PU up to 2.75 times(from3.2 to 8.8MPa),compared to PU based on neat castor oil.The PU composites filed with birch flour,diatomite and their mixture were prepared using home-made dissolver with cutter-shaped attachment at the speed of 1500 min−1.The tensile strength of PU composites filled with birch flour increases up to two time at loading 5–30 wt.%.Application of combined birch flour/diatomite additives has similar effect.The tensile strength of PU composites based on one to one mixture of ethoxylated and neat castor oil and filled with birch flour or combined birch flour/diatomite additives increases sharply up to 16–17 fold(up to 18.1 MPa).The birch flour and diatomite wellsoaked polymer matrix.The main factor determining mechanical performance is the morphology of PU samples and composites.Formation of ordered lamella-like structure of amorphous phase of PU matrix leads to an increase in mechanical performance and glass transition temperatures.Formation of disordered unstructured soft phase of starting PU leads to a decline of these functional properties.展开更多
The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on ...The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on untangling the underlying impact of varying adhesive cohesive or adhesion properties is limited and sometimes appears to provide conflicting conclusions.Comparison between the available studies is also often difficult due to variations in armour systems or ballistic testing being conducted.This review scrutinises the available research,identifying six critical properties of an adhesive layer in determining ballistic performance:elastic modulus,fracture strain,acoustic impedance,tensile bond strength,shear bond strength,and thickness.The impact of each of these properties on ballistic performance is discussed in detail,with clear description of the underlying processes involved,allowing clear optimisation goals to be established depending on the ceramic armour specification.展开更多
In this study,dynamic selenonium salts were incorporated into a polyurethane(PU)matrix to develop transparent,healable and antibacterial coatings.Through systematic formulation optimization,optically clear materials w...In this study,dynamic selenonium salts were incorporated into a polyurethane(PU)matrix to develop transparent,healable and antibacterial coatings.Through systematic formulation optimization,optically clear materials with excellent room-temperature hardness were obtained.Fine-tuning the selenonium content established a synergy between antibacterial performance and network dynamics,as evidenced by vitrimer-like rheological behavior at elevated temperatures.Consequently,the coatings exhibited outstanding reprocessability while maintaining high transparency and structural stability after prolonged saltwater exposure.These integrated features underscore the potential of the developed cationic PU coatings as robust,multifunctional materials for electronic device protection and marine antifouling,combining long-term transparency,recyclability,and antibacterial durability.展开更多
Bio-polyol is considered as a core material to synthesize eco-friendly polyurethane products.However,one of the popular bio-polyols,polytrimethylene ether glycol(PO3G),is reluctant to crystallize and therefore exhibit...Bio-polyol is considered as a core material to synthesize eco-friendly polyurethane products.However,one of the popular bio-polyols,polytrimethylene ether glycol(PO3G),is reluctant to crystallize and therefore exhibits a cold crystallization behavior.This abnormal behavior causes unstable mechanical properties at low-temperature and limits its applications in shape memory devices where crystallization is an essential mechanism.To analyze the unusual phenomenon,we compared different ether polyols focusing on symmetry characteristics and the evenodd effect of carbon backbones.It is found that PO3G has a slow crystallization rate because its ether linkages require specific chain arrangement for attractive interactions.Consequently,a thermal learning mechanism is developed to restore the normal crystallization behavior of elastomers synthesized from the bio-polyol.Repetitive heating and cooling cycles with high-temperature annealing induce urethane exchange reaction and reconstruct the chain orientations for fast crystallization.Results suggest the degree of crystallizations in polyurethane elastomer can be precisely controlled by introducing repetitive thermal treatments to enhance the potential applications of bio-polyols in polymer industries.展开更多
Due to the limited regeneration capacity of myocardial tissue after infarction,designing tissue engineering scaffolds are in demand.In the present study,electrospun nanofibrous scaffolds were made out of polyurethane,...Due to the limited regeneration capacity of myocardial tissue after infarction,designing tissue engineering scaffolds are in demand.In the present study,electrospun nanofibrous scaffolds were made out of polyurethane,collagen and gold nanoparticles with random and aligned nanofiber morphologies.The nanoparticles were green-synthesized using saffron extract.Nanoparticle characterizations with UV-Vis.spectroscopy and DLS illustrated theoretical and hydrodynamic diameters of around 7 and 13 nm,respectively,having zeta potential of−37 mV.SEM and TEM micrographs showed the morphology and diameters of obtained nanofibers.Also,further characterization were done by ATR-FTIR,XRD and TGA investigations and degradation studies.Contact angle measurements showed hydrophilic nature of the scaffolds(59±0.6°for aligned PU/Col/Au50 nanofibers compared to 120±2.6°for random PU nanofibers).Mechanical testing demonstrated appropriate tensile properties of the scaffolds for cardiac tissue engineering(Young’s modulus:1.53±0.07 MPa for aligned PU/Col/Au50 nanofibers compared to 0.4±0.05 MPa for random PU nanofibers).Finally,alamar blue assay revealed proper survival of the cells of HUVEC cell line on the prepared scaffolds,where the highest percentages were observed for random and aligned PU/Col/Au50 nanofibers.According to the findings,the fabricated PU/Col/AuNPs nanofibrous scaffolds could be considered as potential cardiac patches.展开更多
Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymeriza...Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymerization of o-phthalaldehyde(OPA)and epoxide using Lewis pair type two-component organocatalysts for producing acetal-functionalized polyether and polyurethane.Notably,triethylborane as the Lewis acid,in comparison with tri(n-butyl)borane,more effectively enhances the polymerization activity by mitigating borane-induced reduction of the aldehyde group into extra initiating(borinic ester)species.Density functional theory(DFT)calculations present comparable energy barriers of OPA-epoxide cross-propagation and epoxide self-propagation,which is consistent with the experimental finding that an alternating-rich copolymer comprising mostly OPA-epoxide units but also epoxide-epoxide linkages is produced.In particular,when epoxide is added in a large excess,the product becomes a polyether containing acetal functionalities in the central part of the backbone and thus being convertible into polyurethane with refined acid degradability.展开更多
The ongoing operation of subway systems makes existing tunnels vulnerable to deformations and structural damage caused by adjacent foundation pit construction.Such deformations-manifesting as horizontal displacement,h...The ongoing operation of subway systems makes existing tunnels vulnerable to deformations and structural damage caused by adjacent foundation pit construction.Such deformations-manifesting as horizontal displacement,heightened lateral convergence,and internal force redistribution-may significantly compromise subway operational safety.Grouting remediation has become a widely adopted solution for tunnel deformation control and structural reinforcement.Developing optimized grouting materials is crucial for improving remediation effectiveness,ensuring structural integrity,and maintaining uninterrupted subway operations.This investigation explores the substitution of fine mortar aggregates with 0.1 mm discarded rubber particles at varying concentrations(0%,3%,6%,9%,12%,and 15%).Experimental parameters included three water-cement ratios(0.65,0.70,and 0.75)with constant 4%WPU content.Mechanical properties including compressive strength,flexural strength,and compression-to-bending ratio were evaluated across specified curing periods.Material characterization employed Fourier Transform Infrared Spectroscopy(FTIR)spectroscopy for molecular analysis and Scanning Electron Microscopy(SEM)for microstructural examination.Results indicate optimal toughness at 0.70 water-cement ratio with 6%rubber content,meeting mechanical pumping specifications while maintaining structural performance.展开更多
文摘Infrared spectrum is a general quantitation method which can be used to determine the concentration of a certain component in mixture.We proposed that it could also be used to determine the coreactant level of a reactive system.A two-part polyurethane film was used as a model system.The results showed that the height ratio of ring mode signal in urea and C—O signal in polyester polyol can be used to calculate the ratio of the two reactants.The assignments of the peaks were studied by in-situ reaction monitoring with moisture level changes and deuteration methods.The applicable conditions of this calibration curves were also discussed.
基金supported by the Russian state-funded project for ICBFM SB RAS(grant number 125012300656-5)。
文摘Background:The development of materials for cardiovascular surgery that would improve the effectiveness of surgical interventions remains an important task.Surgical intervention during the implantation of vascular prostheses and stents,and the body’s reaction to artificial materials,could lead to chronic inflammation,a local increase in the concentration of proinflammatory factors,and stimulation of unwanted tissue growth.The introduction of nonsteroidal anti-inflammatory drugs into implantable devices could be used to obtain vascular implants that do not induce inflammation and do not induce neointimal tissue outgrowth.Methods:The scaffolds were made by electrospinning from mixtures of polyurethane(PU)with diclofenac(DF).The kinetics of DF release from the scaffolds composed of 3%PU/10%HSA/3%DMSO/DF and 3%PU/DF were studied.The biocompatibility and anti-inflammatory effects of the obtained scaffolds on human gingival fibroblasts and umbilical vein endothelial cells were studied.Results:Both types of scaffolds are characterized by fast DF release.The viability of cells cultured on scaffolds is 2 times worse than that of cells cultured on plastic.The level of the proinflammatory cytokine IL-6 in the culture medium of cells cultured on DF-containing scaffolds was lower than that of cells cultured on scaffolds without DF.Conclusion:The introduction of DF into scaffolds minimizes the inflammation caused by cell reactions to an artificial material.
基金financially supported by the Hubei Key Laboratory of Pollutant Analysis&Reuse Technology(No.PA230102)。
文摘Polyurethane elastomers exhibit high dielectric constants owing to their polar groups,and can be used as energy storage capacitors.Energy storage depends not only on the dielectric constant but also on the dielectric loss.However,the relationship between chain structure and dielectric properties is not yet clear.Ketal-containing crosslinked polyurethane elastomers were prepared using cyclic ketal diol as a chain extender.The effect of the soft segment length on the dielectric properties and energy storage was investigated.The cause of the change in the dipolar polarization with the soft segment length was analyzed.As the soft segment length increased,the hard-soft hydrogen bonding decreased,whereas the hard-hard hydrogen bonding increased.Under the action of an electric field,the polar bonds in the ketal-containing polyurethane elastomer overcome the hydrogen bonding between hard-soft segments to produce polarization;meanwhile,they also experience crankshaft motions to generate polarization.The former has a relatively high relaxation activation energy of approximately 10-20 k J·mol^(-1),resulting in a large dielectric loss.The latter has a relatively low relaxation activation energy,approximately 0.7-1.7 kJ·mol^(-1),leading to low dielectric loss.As a result,the dielectric constant showed a decreasing trend,and the dielectric loss gradually decreased.This study provides a theoretical foundation for improving the dielectric properties of polyurethane elastomers.
文摘The development of intrinsically conductive piezoresistive sensors with high strain tolerance has garnered significant interest.While elastomeric polymers exhibit excellent strain capabilities,their utility in sensing applications has been limited by inherent challenges such as high electrical resistivity,poor aging resistance,and interfacial incompatibility.To address these limitations,hydroxyl-terminated polybutadiene(HTPB)-based polyurethane was chemically modified with acetylferrocene-polyaniline conductive moieties to enhance charge transport properties.Remarkably,this covalent functionalization endowed the resulting ferrocene-polyaniline hybrid polyurethane(FPHP)with a conductivity of2.33 n A at 1 V bias while preserving piezoresistive functionality.The FPHP demonstrated exceptional mechanical-electrical performance,achieving 254% elongation at break with strain-dependent gauge factors of 7.28(0%-12.5% strain,R^(2)=0.9504)and 19.66(12.5%-35.0% strain,R^(2)=0.9929).Further characterization revealed a rapid 0.60 s response time and stability over 3500 strain-release cycles at compression strain,underscoring its durability under repetitive loading.The FPHP sensor was capable of monitoring various human movements and recognizing writing signals.These advances establish a materials design paradigm for fabricating flexible sensors that synergistically integrate high deformability,tunable sensitivity,and robust operational stability,positioning FPHP as a promising candidate for next-generation wearable electronics and soft robotics.
基金supported by the National Natural Science Foundation of China(Nos.22175123,52122302,and 51991351)the 111 Project(No.B20001)Fundamental Research Funds for the Central Universities,and Open and Innovative Fund of Hubei Three Gorges Laboratory(Nos.2022LF2021 and SC213011).
文摘Bio-based polyurethane foam has attracted increasing attentions due to eco-friendliness and fossil feedstock issues.However,the inherent flammability limits its application in different fields.Herein,we demonstrate a green bio-based flame-retardant system to fabricate polyurethane foam composite with durable flame retardancy,smoke suppression,and thermal insulation property.In this system,the green bio-based polyol(VED)with good reactivity and compatibility plays a role of flame retardant and EG acts as a synergistic filler.As a result,the LOI value of foam composite increased to 30.5 vol.%and it achieved a V-0 rating in the UL-94 vertical burning test.Additionally,the peak heat release rate(pHRR)and the total smoke production(TSP)decreased by 66.1%and 63.4%,respectively.Furthermore,the foam composite maintained durable flame retardancy after accelerated thermal aging test,whose thermal-insulating property was maintained even after being treated in high-humidity environment with 85%R.H.for a week.This work provides a facile strategy for durable flame retardancy and long-term thermal insulation performance,and creates opportunities for the practical applications of bio-based foam composites.
基金financially supported by the National Natural Science Foundation of China(Nos.51173118,51273124 and51273126)the National Science Fund for Distinguished Young Scholars of China(No.51425305)+1 种基金the Youth Science and Technology Innovation Team of Sichuan Province(No.2015TD0001)State Key Laboratory of Polymer Materials Engineering(No.sklpme2014-2-03)
文摘In this study, to improve hemocompatibility of biomedical materials, a waterborne polyurethane （WPU）haepafin release coating system （WPU/heparin） is fabricated via simply blending biodegradable WPU emulsions with heparin aqueous solutions. The surface compositions and hydrophilicity of these WPU/heparin blend coatings are characterized by attenuated total reflectance infrared spectroscopy （ATR-FTIR） and water contact angle measurements. These WPU/heparin blend coatings show effectively controlled release of heparin, as determined by the toluidine blue method. Furthermore, the biocompatibility and anticoagulant activity of these blend coatings are evaluated based on the protein adsorption, platelet adhesion, activated partial thromboplastin time （APTT）, thrombin time （TT）, hemolysis, and cytotoxicity. The results indicate that better hemocompatibility and cytocompatilibity are obtained due to blending heparin into this waterborne polyurethane. Thus, the WPU/heparin blend coating system is expected to be valuable for various biomedical applications.
基金The authors acknowledge the financial support of the National Natural Science Foundation of China(No.51908330)the Qilu Young Scholars Program of Shandong University,Natural Science Foundation of Shandong Province(CN)(No.ZR2020ME244),the Fundamental Research Funds of Shandong University(No.2020GN059)the Fundamental Research Funds for the Central Universities,CHD(No.300102210502)and Scientific Research Project of Shandong High-speed Group Co.,Ltd.,(No.SDGS-KJCX-2020-006-08).
文摘As the important matrix material,epoxy resin has been widely used in the composites for various fields.On account of the poor toughness of epoxy resin limiting their suitability for advanced applications,considerable interests have been conducted to modify the epoxy resin to meet the engineering requirements.In this study,the bio-based polyurethane(PU)modified resin was adopted to modify the pure bisphenol-A epoxy by blending method with various proportions.Aiming to illuminate the curing behavior,mechanical and thermal properties,the blended epoxy systems were characterized by viscosity-time analysis,dynamic mechanical analysis(DMA)at different frequencies and temperatures,mechanical tensile test,thermogravimetric analysis(TGA)and Fourier transform infrared(FT-IR)spectroscopy.The results indicated that the introduction of PU modified epoxy was found to significantly inhibit the viscosity growth rates especially when the content of PU modified epoxy resin is higher than 60%.Notwithstanding the dynamic modulus and T_(g)reduced with the increment of PU modified epoxy,remarkable increment on the elongation at break was found and the flexibility was greatly promoted with the introduction of PU modified epoxy.The proportion of PU modified epoxy in the blends should be put balance considerations to obtain optimal mechanical properties.TGA results and FTIR spectrum demonstrated that the addition of PU modified epoxy did not change the thermal decomposition mechanism and chemical reaction mechanism,but the addition of PU modified epoxy inhibits the curing reaction of epoxy resin by measured and calculated the damping temperature domainT from 35.7℃ to 48.9℃.
基金supported by Innovation Capability Support Program of Shaanxi(2022TD-07).
文摘With the rapid development of asphalt pavement technology,it has attracted considerable attention to improving the durability of asphalt pavement.An effective action is to use modified asphalt with high performance and durability.Polyurethane(PU)has been used in asphalt pavement engineering to enhance the durability and service life of asphalt pavement because of its excellent high-temperature performance,toughness,wear resistance,aging resistance and oil resistance.However,PU modified asphalt technology is still in the exploratory stage.The preparation,modification mechanism and working performances of PU modified asphalt need to be further clarified.Therefore,this paper summarized the research progress of PU modified asphalt and its mixture.The composition of PU modified asphalt was introduced.The addition methods of PU materials and preparation process parameters of the PU modified asphalt were determined.The modification mechanism of PU on asphalt was discussed.The effects of polyurethane on asphalt were analyzed and the road performances of its mixture were evaluated.Finally,the development tendency towards PU modified asphalt and its mixture were forecasted.
基金National Natural Science Foundation of China! (No.5 9990 30 0 4)
文摘A poly(ethylene oxide) urethane and a model compound of hard segment(HD) were prepared in this study. Solid polymer electrolytes were got from the blends of polyurethane, HD and NaClO 4. The samples were characterized by mean of FT IR and AFM. Effects of salt concentration on ion polymer interaction and further on morphologic structure of the composites were investigated and some interesting results were obtained. The results show that HD and concentration of NaClO 4 have an important effect on ion polymer interaction and morphologic structure of the complex. It is also found that in AFM pictures of the samples there is a transition point and ion polymer interaction of the polyurethane/salt systems play an extremely important role on morphologic structure.
基金the financial support from the Fujian Science Foundation for Outstanding Youth(2023J06039)the National Natural Science Foundation of China(Grant No.41977259,U2005205,41972268)the Independent Research Project of Technology Innovation Center for Monitoring and Restoration Engineering of Ecological Fragile Zone in Southeast China(KY-090000-04-2022-019)。
文摘Shotcrete is one of the common solutions for shallow sliding.It works by forming a protective layer with high strength and cementing the loose soil particles on the slope surface to prevent shallow sliding.However,the solidification time of conventional cement paste is long when shotcrete is used to treat cohesionless soil landslide.The idea of reinforcing slope with polyurethane solidified soil(i.e.,mixture of polyurethane and sand)was proposed.Model tests and finite element analysis were carried out to study the effectiveness of the proposed new method on the emergency treatment of cohesionless soil landslide.Surcharge loading on the crest of the slope was applied step by step until landslide was triggered so as to test and compare the stability and bearing capacity of slope models with different conditions.The simulated slope displacements were relatively close to the measured results,and the simulated slope deformation characteristics were in good agreement with the observed phenomena,which verifies the accuracy of the numerical method.Under the condition of surcharge loading on the crest of the slope,the unreinforced slope slid when the surcharge loading exceeded 30 k Pa,which presented a failure mode of local instability and collapse at the shallow layer of slope top.The reinforced slope remained stable even when the surcharge loading reached 48 k Pa.The displacement of the reinforced slope was reduced by more than 95%.Overall,this study verifies the effectiveness of polyurethane in the emergency treatment of cohesionless soil landslide and should have broad application prospects in the field of geological disasters concerning the safety of people's live.
基金financially supported by the National Key Research and Development Program of China(Grant Nos.2023YFB2604005)the National Key Research and Development 451 Program of China(Grant No.2021YFC3100803)the Yangtze River Water Science Research Joint Fund Key Project of National Natural Science Foundation of China(Grant No.U2340231).
文摘Polyurethane foam,when used as a compressible layer in deep soft rock tunnels,offers a feasible solution to reduce the support pressure on the secondary lining.The foam spraying method using sprayed polyurethane material is convenient for engineering applications;however,the compressive behaviour and feasibility of sprayed polyurethane material as a compressible layer remain unclear.To address this gap,this study conducts uniaxial compression tests and scanning electron microscope(SEM)tests to investigate the compressive behaviour of the rigid foams fabricated from a self-developed polyurethane spray material.A peridynamics model for the composite lining with a polyurethane compressible layer is then established.After validating the proposed method by comparison with two tests,a parametric study is carried out to investigate the damage evolution of the composite lining with a polyurethane compressible layer under various combinations of large deformations and compressible layer parameters.The results indicate that the polyurethane compressible layer effectively reduces the radial deformation and damage index of the secondary lining while increasing the damage susceptibility of the primary lining.The thickness of the polyurethane compressible layer significantly influences the prevention effect of large deformation-induced damage to the secondary lining within the density range of 50e100 kg/m^(3).In accordance with the experimental and simulation results,a simple,yet reasonable and convenient approach for determining the key parameters of the polyurethane compressible layer is proposed,along with a classification scheme for the parameters of the polyurethane compressible layer.
基金Funded by the National Natural Science Foundation of China(No.52370128)the Fundamental Research Funds for the Central Universities(No.2572022AW54)。
文摘This study identified castor oil and phosphate ester as effective retarders through setting time,tensile,and flexural tests,and determined their optimal dosages.The mechanism by which phosphate ester affects the setting time of polyurethane was further investigated using molecular dynamics simulations.Fourier transform infrared spectroscopy was also employed to systematically study the physical and chemical interactions between phosphate esters and polyurethane materials.The results demonstrate that a 1%concentration of phosphate ester provides the most effective retarding effect with minimal impact on the strength of polyurethane.When phosphate ester is added to the B component of the two-component polyurethane system,its interaction energy with component A decreases,as do the diffusion coefficient and aggregation degree of component B on the surface of component A.This reduction in interaction slows the setting time.Additionally,the addition of phosphate ester to polyurethane leads to the disappearance or weakening of functional groups,indicating competitive interactions within the phosphate ester components that inhibit the reaction rate.
文摘Doping perylene diimide(PDI)into a polymer matrix is a simple strategy to prepare near-infrared(NIR)reflective materials,but the mechanical properties and NIR reflectance properties are significantly compromised due to macro-phase separation.In this study,a novel polymer(denoted as PU-PDI)with intrinsic NIR reflective proper⁃ties was synthesized by covalent incorporation of PDI units into polyurethane chains.Its photophysical characteris⁃tics,mechanical property and NIR reflectance property are investigated in detail.The results show that covalent in⁃corporation reduces the severe aggregation of PDI units,thereby endows PU-PDI with excellent mechanical property.The elongation at break of PU-PDI can reach more than 700%,and the breaking strength is 34.11 MPa.Moreover,compared to the blending system,PU-PDI possesses enhanced NIR reflection ability due to the better dispersion of PDI units.
文摘In this study,the polyurethanes(PU)were synthesized from 4,4′-methylene diphenyl diisocyanate and biobased ethoxylated castor oil or one to one mixture of ethoxylated and neat castor oil by direct mixing method.Utilization of ethoxylated castor oil increases tensile strength of PU up to 2.75 times(from3.2 to 8.8MPa),compared to PU based on neat castor oil.The PU composites filed with birch flour,diatomite and their mixture were prepared using home-made dissolver with cutter-shaped attachment at the speed of 1500 min−1.The tensile strength of PU composites filled with birch flour increases up to two time at loading 5–30 wt.%.Application of combined birch flour/diatomite additives has similar effect.The tensile strength of PU composites based on one to one mixture of ethoxylated and neat castor oil and filled with birch flour or combined birch flour/diatomite additives increases sharply up to 16–17 fold(up to 18.1 MPa).The birch flour and diatomite wellsoaked polymer matrix.The main factor determining mechanical performance is the morphology of PU samples and composites.Formation of ordered lamella-like structure of amorphous phase of PU matrix leads to an increase in mechanical performance and glass transition temperatures.Formation of disordered unstructured soft phase of starting PU leads to a decline of these functional properties.
基金funding for this research was provided by Netherlands Ministry of Defence
文摘The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on untangling the underlying impact of varying adhesive cohesive or adhesion properties is limited and sometimes appears to provide conflicting conclusions.Comparison between the available studies is also often difficult due to variations in armour systems or ballistic testing being conducted.This review scrutinises the available research,identifying six critical properties of an adhesive layer in determining ballistic performance:elastic modulus,fracture strain,acoustic impedance,tensile bond strength,shear bond strength,and thickness.The impact of each of these properties on ballistic performance is discussed in detail,with clear description of the underlying processes involved,allowing clear optimisation goals to be established depending on the ceramic armour specification.
基金financially supported by the National Natural Science Foundation of China(Nos.21971177 and 52503155)Natural Science Foundation of the Jiangsu Higher Education Institution of China(No.22KJA150004)+7 种基金China Scholarship Council(No.202206920034)Research Foundation Flanders(FWO)(Application 1S34725N)Priority Academic Program Development(PAPD)of Jiangsu Higher Education InstitutionsJiangsu Key Laboratory of Advanced Functional Polymers Design and ApplicationSoochow UniversitySuzhou Key Laboratory of Macromolecular Design and Precision SynthesisProgram of Innovative Research Team of Soochow Universityfunding from the European Research Council(ERC)under the European Union’s Horizon 2020 Research and Innovation Program 101021081(ERC-AdG-2020,CiMaC-project)。
文摘In this study,dynamic selenonium salts were incorporated into a polyurethane(PU)matrix to develop transparent,healable and antibacterial coatings.Through systematic formulation optimization,optically clear materials with excellent room-temperature hardness were obtained.Fine-tuning the selenonium content established a synergy between antibacterial performance and network dynamics,as evidenced by vitrimer-like rheological behavior at elevated temperatures.Consequently,the coatings exhibited outstanding reprocessability while maintaining high transparency and structural stability after prolonged saltwater exposure.These integrated features underscore the potential of the developed cationic PU coatings as robust,multifunctional materials for electronic device protection and marine antifouling,combining long-term transparency,recyclability,and antibacterial durability.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(RS-2024-00451587)supported by Post-plastic Specialized Graduate Program through the Korea Environmental Industry&Technology Institute(KEITI)funded by the Ministry of Environment(MOE).
文摘Bio-polyol is considered as a core material to synthesize eco-friendly polyurethane products.However,one of the popular bio-polyols,polytrimethylene ether glycol(PO3G),is reluctant to crystallize and therefore exhibits a cold crystallization behavior.This abnormal behavior causes unstable mechanical properties at low-temperature and limits its applications in shape memory devices where crystallization is an essential mechanism.To analyze the unusual phenomenon,we compared different ether polyols focusing on symmetry characteristics and the evenodd effect of carbon backbones.It is found that PO3G has a slow crystallization rate because its ether linkages require specific chain arrangement for attractive interactions.Consequently,a thermal learning mechanism is developed to restore the normal crystallization behavior of elastomers synthesized from the bio-polyol.Repetitive heating and cooling cycles with high-temperature annealing induce urethane exchange reaction and reconstruct the chain orientations for fast crystallization.Results suggest the degree of crystallizations in polyurethane elastomer can be precisely controlled by introducing repetitive thermal treatments to enhance the potential applications of bio-polyols in polymer industries.
基金supported by Shiraz University of Medical Sciences,Shiraz,Iran(grant No.:17780).
文摘Due to the limited regeneration capacity of myocardial tissue after infarction,designing tissue engineering scaffolds are in demand.In the present study,electrospun nanofibrous scaffolds were made out of polyurethane,collagen and gold nanoparticles with random and aligned nanofiber morphologies.The nanoparticles were green-synthesized using saffron extract.Nanoparticle characterizations with UV-Vis.spectroscopy and DLS illustrated theoretical and hydrodynamic diameters of around 7 and 13 nm,respectively,having zeta potential of−37 mV.SEM and TEM micrographs showed the morphology and diameters of obtained nanofibers.Also,further characterization were done by ATR-FTIR,XRD and TGA investigations and degradation studies.Contact angle measurements showed hydrophilic nature of the scaffolds(59±0.6°for aligned PU/Col/Au50 nanofibers compared to 120±2.6°for random PU nanofibers).Mechanical testing demonstrated appropriate tensile properties of the scaffolds for cardiac tissue engineering(Young’s modulus:1.53±0.07 MPa for aligned PU/Col/Au50 nanofibers compared to 0.4±0.05 MPa for random PU nanofibers).Finally,alamar blue assay revealed proper survival of the cells of HUVEC cell line on the prepared scaffolds,where the highest percentages were observed for random and aligned PU/Col/Au50 nanofibers.According to the findings,the fabricated PU/Col/AuNPs nanofibrous scaffolds could be considered as potential cardiac patches.
基金financially supported by the National Key R&D Program of China(No.2022YFC2805103)the National Natural Science Foundation of China(Nos.52022031 and 52263001)the Foundation from Qinghai Science and Technology Department(No.2022-ZJ-944Q)。
文摘Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymerization of o-phthalaldehyde(OPA)and epoxide using Lewis pair type two-component organocatalysts for producing acetal-functionalized polyether and polyurethane.Notably,triethylborane as the Lewis acid,in comparison with tri(n-butyl)borane,more effectively enhances the polymerization activity by mitigating borane-induced reduction of the aldehyde group into extra initiating(borinic ester)species.Density functional theory(DFT)calculations present comparable energy barriers of OPA-epoxide cross-propagation and epoxide self-propagation,which is consistent with the experimental finding that an alternating-rich copolymer comprising mostly OPA-epoxide units but also epoxide-epoxide linkages is produced.In particular,when epoxide is added in a large excess,the product becomes a polyether containing acetal functionalities in the central part of the backbone and thus being convertible into polyurethane with refined acid degradability.
基金supported by the National Natural Science Foundation of China,Grant Nos.42477185,41602308the Zhejiang Provincial Natural Science Foundation of China,Grant No.LY20E080005+2 种基金the Zhejiang Province University Students Science and Technology Innovation Program,Grant No.0201310P28the PostGraduate Course Construction Project of Zhejiang University of Science and Technology,Grant No.2021yjskj05the Zhejiang University of Science and Technology Graduate Research and Innovation Fund,Grant No.2023yjskc10.
文摘The ongoing operation of subway systems makes existing tunnels vulnerable to deformations and structural damage caused by adjacent foundation pit construction.Such deformations-manifesting as horizontal displacement,heightened lateral convergence,and internal force redistribution-may significantly compromise subway operational safety.Grouting remediation has become a widely adopted solution for tunnel deformation control and structural reinforcement.Developing optimized grouting materials is crucial for improving remediation effectiveness,ensuring structural integrity,and maintaining uninterrupted subway operations.This investigation explores the substitution of fine mortar aggregates with 0.1 mm discarded rubber particles at varying concentrations(0%,3%,6%,9%,12%,and 15%).Experimental parameters included three water-cement ratios(0.65,0.70,and 0.75)with constant 4%WPU content.Mechanical properties including compressive strength,flexural strength,and compression-to-bending ratio were evaluated across specified curing periods.Material characterization employed Fourier Transform Infrared Spectroscopy(FTIR)spectroscopy for molecular analysis and Scanning Electron Microscopy(SEM)for microstructural examination.Results indicate optimal toughness at 0.70 water-cement ratio with 6%rubber content,meeting mechanical pumping specifications while maintaining structural performance.
