Fecal incontinence(FI),which can arise from various pathogenic mechanisms,has attracted considerable attention worldwide.Despite its importance,the reproduction of the defecatory system to study the mechanisms of FI r...Fecal incontinence(FI),which can arise from various pathogenic mechanisms,has attracted considerable attention worldwide.Despite its importance,the reproduction of the defecatory system to study the mechanisms of FI remains limited,largely because of social stigma and being considered inappropriate.Inspired by the rectum’s functionalities,we developed a soft robotic system that includes a power supply,pressure sensors,data acquisition systems,a flushing mechanism,stages,and a rectal module.Specifically,the innovative soft rectal module includes actuators inspired by sphincter muscles,both soft and rigid covers,and a soft rectum mold.The rectal mold,which was fabricated from materials that mimic human rectal tissue,was produced using a mold replication fabrication method.Both the soft and rigid components of the mold were created using three-dimensional(3D)printing technology.In addition,the sphincter muscle-inspired actuators featured double-layer pouch structures that were modeled and optimized based on multilayer perceptron methods to obtain a high contraction ratio(100%),generate high pressure(9.8 kPa),and have a short recovery time(3 s).Upon assembly,this defecation robot could smoothly expel liquid feces,perform controlled solid fecal cutting,and defecate extremely solid long feces,thus closely replicating the functions of the human rectum and anal canal.This defecation robot has the potential to facilitate human understanding of the complex defecation system and contribute to the development of improved quality-of-life devices related to defecation.展开更多
In the field of flexible polishing,the accuracy of contact force control directly affects processing quality and material removal uniformity.However,the complex dynamic contact model and inherent strong hysteresis of ...In the field of flexible polishing,the accuracy of contact force control directly affects processing quality and material removal uniformity.However,the complex dynamic contact model and inherent strong hysteresis of pneumatic systems can significantly impact the force control accuracy of pneumatic polishing system end-effectors.To enhance responsiveness and control precision during the flexible polishing process,this study proposes an observer-based fuzzy adaptive control(OBFAC)scheme.To ensure control accuracy under an uncertain dynamic contact model,a fuzzy state observer is designed to estimate unmeasured states,while fuzzy logic approximates the uncertain nonlinear functions in the model to improve control performance.Additionally,the integral barrier Lyapunov function is employed to ensure that all states remain within predefined constraints.The stability of the proposed control scheme is analyzed using the Lyapunov function,and a pneumatic polishing experimental platform is constructed to conduct polishing contact force control experiments under multiple scenarios.Experimental results demonstrate that the proposed OBFAC scheme achieves superior tracking control performance compared to existing control schemes.展开更多
Background The middle ear pneumatic system(MEPS)supports pressure balance,essential for sound conduction.Its volume and surface area are key indicators of pneumatization and ventilation,yet their specific contribution...Background The middle ear pneumatic system(MEPS)supports pressure balance,essential for sound conduction.Its volume and surface area are key indicators of pneumatization and ventilation,yet their specific contributions to pressure regulation need further exploration.Objective To evaluate the accuracy and sensitivity of parameters characterizing the MEPS,including volume(V),surface area(S),and surface-area-to-volume ratio(S/V),in normal ears.Materials and Methods We collected CT images of the temporal bone from 63 normal ears for this study.The volume(V),surface area(S),and surface-area-to-volume ratio(S/V)of the MEPS were measured and calculated using three-dimensional reconstruction technology.Statistical methods were used to process the data and determine the 95%reference range for the S,V,and S/V of the MEPS in the normal ear.At the same time,we analyzed the impact of differences in gender and the left and right sides on the measurements.Results The 95%reference values for the S,V,and S/V of the MEPS in normal ears were 1057.10~18239.16 mm²,609.16~9854.11 mm^(3),and 1.39~2.52 mm^(-1) respectively.There were no significant differences in the measurements between genders and between the left and right sides.Conclusions and Significance This study has established the 95%reference values for the S,V,and S/V of the MEPS in normal ears,which were 1057.10-18239.16 mm²,609.16-9854.11 mm^(3),and 1.39-2.52 mm^(-1) respectively.We found that while there is a wide variation in the V values among normal ears,there is less variability in the S/V values.This structural characteristic suggests that changes in the S/V value may have a more significant impact on the balance of middle ear pressure,and it provides important reference data for the construction and functional reconstruction of three-dimensional models of the MEPS.These findings may aid in diagnosing middle ear disorders,such as otitis media with effusion,and guide interventions to restore pressure balance.展开更多
Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varietie...Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.展开更多
The properties and the design of PWM systems are discussed. The relations among the orifice areas of the valves, initial times and the rate of piston areas are deduced. Also a PWM system is designed and some experimen...The properties and the design of PWM systems are discussed. The relations among the orifice areas of the valves, initial times and the rate of piston areas are deduced. Also a PWM system is designed and some experiments are done. The experiment results agree with those of theory analyses. It can be shown that the relations are correct and the conclusion of theory analyses is reasonable.展开更多
AIM: To evaluate the effect of different approaches in the treatment of achalasia in China. METHODS: We performed a systematic review and meta-analysis of Chinese literature by searching the Chinese Biomedical Databas...AIM: To evaluate the effect of different approaches in the treatment of achalasia in China. METHODS: We performed a systematic review and meta-analysis of Chinese literature by searching the Chinese Biomedical Database and Chinese scientific Journals database (up to March 2008). All cohort studies (controlled or uncontrolled) in which the patients were observed for more than a year were reviewed in detail. Dichotomous outcomes were reported as relative risks (RR) with 95% confidence interval (CI) for controlled trials. The efficacy in uncontrolled trials was assessed by a pooled estimate of response rate with individual studies weighted in proportion to the sample size. RESULTS: Seven controlled trials compared the effect of botulinum toxin injection (BoTx) with pneumatic dilation (PD). PD was superior to BoTx [65.2% vs 45.3%; RR 1.47 (95% CI 1.23-1.77), P < 0.0001], and had a lower clinical relapse rate (BoTx 30.2% vs PD 10%, RR 0.32 (0.16-0.65), P = 0.001). Heller myotomy (HM) had superior remission rate compared to PD [HM 94.0% vs PD 64.1%, RR 1.48 (1.15-1.99), P = 0.002]. In uncontrolled trials, the effectiveness of PD was 86.6% (23.9%) vs 94.8% (10.6%) for HM. The main complications of PD were perforation and gastroesophageal reflux disease. CONCLUSION: HM is the most effective long-term treatment for patients with achalasia in China. In the future, controlled clinical trials on the treatment of achalasia should focus on comparing laparoscopic myotomy with or without antireflux procedure,including different partial and total fundoplication techniques.展开更多
Pneumatic system has been widely used throughout industry, and it consumes more than billions kW h of electricity one year all over the world. So as to improve the efficiency of pneumatic system, its power evaluation ...Pneumatic system has been widely used throughout industry, and it consumes more than billions kW h of electricity one year all over the world. So as to improve the efficiency of pneumatic system, its power evaluation as well as measurement methods should be proposed, and their applicability should be validated. In this paper, firstly, power evaluation and measurement methods of pneumatic system were introduced for the first time. Secondly, based on the proposed methods, power distributions in pneumatic system was analyzed. Thirdly, through the analysis on pneumatic efficiencies of typical compressors and pneumatic components, the applicability of the proposed methods were validated. It can be concluded that, first of all, the proposed methods to evaluation and measurement the power of pneumatic system were efficient. Furthermore, the pneumatic power efficiencies of pneumatic system in the air production and cleaning procedure are respectively about 35%–75% and 85%–90%. Moreover, the pneumatic power efficiencies of pneumatic system in the transmission and consumption procedures are about 70%–85% and 10%–35%. And the total pneumatic power efficiency of pneumatic system is about 2%–20%, which varies largely with the system configuration. This paper provides a method to analyze and measure the power of pneumatic system, lay a foundation for the optimization and energy-saving design of pneumatic system.展开更多
With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potentia...With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potential in many fields. However, most existing control methods with high tracking performance need to know the model information and to use pressure sensor. This limits the application of the pneumatic servo system. An adaptive backstepping slide mode control method is proposed for pneumatic position servo system. The proposed method designs adaptive slide mode controller using backstepping design technique. The controller parameter adaptive law is derived from Lyapunov analysis to guarantee the stability of the system. A theorem is testified to show that the state of closed-loop system is uniformly bounded, and the closed-loop system is stable. The advantages of the proposed method include that system dynamic model parameters are not required for the controller design, uncertain parameters bounds are not need, and the bulk and expensive pressure sensor is not needed as well. Experimental performance, as compared with some existing methods. results show that the designed controller can achieve better tracking展开更多
The high pressure pneumatic system has been applied to special industries. It may cause errors when we analyze high pressure pneumatics under ideal gas assumption. However, the real gas effect on the performances of h...The high pressure pneumatic system has been applied to special industries. It may cause errors when we analyze high pressure pneumatics under ideal gas assumption. However, the real gas effect on the performances of high pressure pneumatics is seldom investigated. In this paper, the real gas effects on air enthalpy and internal energy are estimated firstly to study the real gas effect on the energy conversion. Under ideal gas assumption, enthalpy and internal energy are solely related to air temperature. The estimation result indicates that the pressure enthalpy and pressure internal energy of real pneumatic air obviously decrease the values of enthalpy and internal energy for high pressure pneumatics, and the values of pressure enthalpy and pressure internal energy are close. Based on the relationship among pressure, enthalpy and internal energy, the real gas effects on charging and discharging processes of high pressure pneumatics are estimated, which indicates that the real gas effect accelerates the temperature and pressure decreasing rates during discharging process, and decelerates their increasing rates during charging process. According to the above analysis, and for the inconvenience in building the simulation model for real gas and the difficulty of measuring the detail thermal capacities of pneumatics, a method to compensate the real gas effect under ideal gas assumption is proposed by modulating the thermal capacity of the pneumatic container in simulation. The experiments of switching expansion reduction （SER） for high pressure pneumatics are used to verify this compensating method. SER includes the discharging process of supply tanks and the charging process of expansion tank. The simulated and experimental results of SER are highly consistent. The proposed compensation method provides a convenient way to obtain more realistic simulation results for high pressure pneumatics.展开更多
The pneumatic pressure control systems have been used in some fields. However, the researches on pneumatic pressure control mainly focus on constant pressure regulation. Poor dynamic characteristics and strong nonline...The pneumatic pressure control systems have been used in some fields. However, the researches on pneumatic pressure control mainly focus on constant pressure regulation. Poor dynamic characteristics and strong nonlinearity of such systems limit its application in the field of pressure tracking control. In order to meet the demand of generating dynamic pressure signal in the application of the hardware-in-the-loop simulation of aerospace engineering, a positive and negative pneumatic pressure servo system is provided to implement dynamic adjustment of sealed chamber pressure. A mathematical model is established with simulation and experiment being implemented afterwards to discuss the characteristics of the system, which shows serious asymmetry in the process of charging and discharging. Based on the analysis of the system dynamics, a fuzzy proportional integral derivative （PID） controller with asymmetric fuzzy compensator is proposed. Different from conventional adjusting mecha- nisms employing the error and change in error of the controlled variable as input parameters, the current cham- ber pressure and charging or discharging state are chosen as inputs of the compensator, which improves adaptability. To verify the effectiveness and performance of the pro- posed controller, the comparison experiments tracking sinusoidal and square wave commands are conducted. Experimental results show that the proposed controller can obtain better dynamic performance and relatively consis- tent control performance across the scope of work （2-140 kPa）. The research proposes a fuzzy control method to overcome asymmetry and enhance adaptability for the positive and negative pneumatic pressure servo system.展开更多
When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic sys...When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic system,and the energy-saving effect is verified by experiments.First,the experimental platform of a pneumatic rotary actuator servo-control system is built,and the mechanism of the valve-controlled cylinder system is analyzed.Then,the output power characteristics and load characteristics of the system are derived,and their characteristic curves are drawn.The employed air compressor is considered as a constant-pressure source of a quantitative pump,and the power characteristic of the system is matched.The power source characteristic curve should envelope the output characteristic curve and load characteristic curve.The minimum gas supply pressure obtained by power matching represents the optimal gas supply pressure.The comparative experiments under two different gas supply pressure conditions show that the system under the optimal gas supply pressure can greatly reduce energy losses.展开更多
This paper presents the construction of a pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer. The one-wheel car model can be approximately described as a nonl...This paper presents the construction of a pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer. The one-wheel car model can be approximately described as a nonlinear two degrees of freedom system subject to excitation from a road profile. The active control is composed of fuzzy and disturbance controls, and the active control force is constructed by actuating a pneumatic actuator. A phase lead-lag compensator is inserted to counter the performance degradation due to the delay of the pneumatic actuator. The experimental result indicates that the proposed active suspension improves much the vibration suppression of the car model.展开更多
Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure ...Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure could be reduced by decreasing the ratio of length to diameter of nozzle. The friction between high speed air and pipe wall would be reduced if the nozzle is designed to be converging shape comparing with straight shape. But the volume flow and pressure, discussed in these studies, do not describe energy loss of the blowing system directly. Pneumatic power is an innovative principle to estimate pneumatic system’s energy consumption directly. Based on the above principle, a pulse blowing method is put forward for saving energy. A flow experiment is carried out, in which the high speed air flows from the pulse blowing system and continuous blowing system respectively to a plate with grease on top. Supply pressure and the volume of air used for removing the grease are measured to calculate energy consumption. From the experiment result, the pulse blowing system performs to conserve energy comparing with the continuous blowing system. The frequency and duty ratio of pulse flow influence the blowing characteristic. The pulse blowing system performs to be the most efficient at the specified frequency and duty ratio. Then a pneumatic self-oscillated method based on air operated valve is put forward to generate pulse flow. A simulation is made about dynamic modeling the air operated valve and calculating the motion of the valve core and output pressure. The simulation result verifies the system to be able to generate pulse flow, and predicts the key parameters of the frequency and duty ratio measured by experiment well. Finally, on the basis of simplifying and solution of the pulse blowing system’s mathematic model, the relationship between system’s frequency duty ratio and the dimensions of components is simply described with four algebraic equations. The system could be designed with specified frequency and duty ratio according to the four equations. This study provides theoretical basis for designing energy-saving air blowing system.展开更多
The pneumatic rotary position system, in which an electro-pneumatic proportional flow valve controled a rotary cylinder, was studied, and its mathematical model was built. The model indicated that the controlled pneum...The pneumatic rotary position system, in which an electro-pneumatic proportional flow valve controled a rotary cylinder, was studied, and its mathematical model was built. The model indicated that the controlled pneumatic system had disadvantages such as inherent non-linearity and variations of system parameters with working points. In order to improve the dynamic performance of the system, feed forward compensation self-tuning pole-placement strategy was adopted to place the poles of the system in a desired position in real time, and a recursive least square method with fixed forgetting factors was also used in the parameter estimation. Experimental results show that the steady state error of the pneumatic rotary position system is within 3% and the identified system parameters can be converged in 5 s. Under different loads, the controlled system has an excellent tracking performance and robustness of anti-disturbance.展开更多
In this paper, a novel control law is presented, which uses neural-network techniques to approximate the affine class nonlinear system having unknown or uncertain dynamics and noise disturbances. It adopts an adaptive...In this paper, a novel control law is presented, which uses neural-network techniques to approximate the affine class nonlinear system having unknown or uncertain dynamics and noise disturbances. It adopts an adaptive control law to adjust the network parameters online and adds another control component according to H-infinity control theory to attenuate the disturbance. This control law is applied to the position tracking control of pneumatic servo systems. Simulation and experimental results show that the tracking precision and convergence speed is obviously superior to the results by using the basic BP-network controller and self-tuning adaptive controller.展开更多
The development of active endoscopy techniques is one important area of medical robot.This paper designed a new flexible and active endoscopy robotic system for direct tracheal inspection.The mobile mechanism of the r...The development of active endoscopy techniques is one important area of medical robot.This paper designed a new flexible and active endoscopy robotic system for direct tracheal inspection.The mobile mechanism of the robot is based on the inchworm movement actuated by pneumatic rubber actuator.There are five air chambers controlled independently,by adjusting pressures in air chambers,the robot can move in a straight mode or in a bending mode.The inspection sensors and some therapy surgery tools can be equipped in the front of the robot.The prototype was made and its mechanical characteristics were analyzed.The robot could move smoothly in a small plastic tube,and the robot is respectable to be used for inspection in human trachea directly.展开更多
The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not ad...The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not adjustable and the energy consumption does not adapt to the real time sewerage requirement. Therefore, it is important to study the sewerage force adjustment to improve the energy efficiency. This paper proposes an energy conservation design in vacuum sanitation systems with pneumatic ejector circuits. The sewerage force is controlled by changing the systematic vacuum degree according to the amount of the excreta. In particular, the amount of the excreta is tested by liquid level sensor and mass sensor. According to the amount of the excreta, the relationship between the excreta amount and the sewerage force is studied to provide proper propulsive force. In the other aspect, to provide variable vacuum degrees for different sanitation requirements, the suction and discharge system is designed with pneumatic vacuum ejector. On the basis of the static flow-rate characteristics and the vacuum generation model, the pressure response in the ejector circuit is studied by using the static flow rate characteristics of the ejector and air status equation. The relationship is obtained between supplied compressed air and systematic vacuum degree. When the compressed air is supplied to the ejector continuously, the systematic vacuum degree increases until the vacuum degree reaches the extreme value. Therefore, the variable systematic vacuum degree is obtained by controlling the compressed air supply of the ejector. To verify the effect of energy conservation, experiments are carried out in the artificial excreta collection, and the variable vacuum-degree design saves more than 30% of the energy supply. The energy conservation is realized effectively in the new vacuum sanitation systems with good application prospect. The proposed technology provides technological support for the energy conservation of vacuum sanitation systems.展开更多
The pneumatic vibration isolator(PVI)plays an increasingly important role in precision manufacturing.In this paper,aiming to detect the performance of the pressure regulator in the PVI system,a PVI testing system with...The pneumatic vibration isolator(PVI)plays an increasingly important role in precision manufacturing.In this paper,aiming to detect the performance of the pressure regulator in the PVI system,a PVI testing system with a pressure regulator is designed and developed.Firstly,the structure of the pneumatic spring is presented and analyzed,and the nonlinear stiffness is obtained based on the ideal gas model and material mechanics.Then,according to the working principle and continuity equations of ideal airflow,a dynamic model of the PVI system with a pressure regulator is established.Through the simulation analysis,the vibration isolation performance is improved with the efficient and precise pressure regulator.The average values of both the vibration velocity and transmission rate decrease when the vibration is set to 4,10,20 and 40 Hz,respectively.The experiments demonstrate the reliability and effectiveness of the pressure regulator.This achievement will become an important basis for future research concerning precision manufacturing.展开更多
基金supported by Grant-in-Aid for Scientific Research on Innovative Areas from the Japan Society for the Promotion of Science(Nos.18H05473 and 23K13290).
文摘Fecal incontinence(FI),which can arise from various pathogenic mechanisms,has attracted considerable attention worldwide.Despite its importance,the reproduction of the defecatory system to study the mechanisms of FI remains limited,largely because of social stigma and being considered inappropriate.Inspired by the rectum’s functionalities,we developed a soft robotic system that includes a power supply,pressure sensors,data acquisition systems,a flushing mechanism,stages,and a rectal module.Specifically,the innovative soft rectal module includes actuators inspired by sphincter muscles,both soft and rigid covers,and a soft rectum mold.The rectal mold,which was fabricated from materials that mimic human rectal tissue,was produced using a mold replication fabrication method.Both the soft and rigid components of the mold were created using three-dimensional(3D)printing technology.In addition,the sphincter muscle-inspired actuators featured double-layer pouch structures that were modeled and optimized based on multilayer perceptron methods to obtain a high contraction ratio(100%),generate high pressure(9.8 kPa),and have a short recovery time(3 s).Upon assembly,this defecation robot could smoothly expel liquid feces,perform controlled solid fecal cutting,and defecate extremely solid long feces,thus closely replicating the functions of the human rectum and anal canal.This defecation robot has the potential to facilitate human understanding of the complex defecation system and contribute to the development of improved quality-of-life devices related to defecation.
基金Supported by National Key Research and Development Program of China(Grant No.2022YFB3403402)National Natural Science Foundation of China Basic Research Programme for PhD Students(Grant No.524B2049)。
文摘In the field of flexible polishing,the accuracy of contact force control directly affects processing quality and material removal uniformity.However,the complex dynamic contact model and inherent strong hysteresis of pneumatic systems can significantly impact the force control accuracy of pneumatic polishing system end-effectors.To enhance responsiveness and control precision during the flexible polishing process,this study proposes an observer-based fuzzy adaptive control(OBFAC)scheme.To ensure control accuracy under an uncertain dynamic contact model,a fuzzy state observer is designed to estimate unmeasured states,while fuzzy logic approximates the uncertain nonlinear functions in the model to improve control performance.Additionally,the integral barrier Lyapunov function is employed to ensure that all states remain within predefined constraints.The stability of the proposed control scheme is analyzed using the Lyapunov function,and a pneumatic polishing experimental platform is constructed to conduct polishing contact force control experiments under multiple scenarios.Experimental results demonstrate that the proposed OBFAC scheme achieves superior tracking control performance compared to existing control schemes.
基金supported by the[National Natural Science Foundation of China]under Grant[number 12172082][Catch up with and surpass technology projects]under Grant[number 2022LCJSGC24]。
文摘Background The middle ear pneumatic system(MEPS)supports pressure balance,essential for sound conduction.Its volume and surface area are key indicators of pneumatization and ventilation,yet their specific contributions to pressure regulation need further exploration.Objective To evaluate the accuracy and sensitivity of parameters characterizing the MEPS,including volume(V),surface area(S),and surface-area-to-volume ratio(S/V),in normal ears.Materials and Methods We collected CT images of the temporal bone from 63 normal ears for this study.The volume(V),surface area(S),and surface-area-to-volume ratio(S/V)of the MEPS were measured and calculated using three-dimensional reconstruction technology.Statistical methods were used to process the data and determine the 95%reference range for the S,V,and S/V of the MEPS in the normal ear.At the same time,we analyzed the impact of differences in gender and the left and right sides on the measurements.Results The 95%reference values for the S,V,and S/V of the MEPS in normal ears were 1057.10~18239.16 mm²,609.16~9854.11 mm^(3),and 1.39~2.52 mm^(-1) respectively.There were no significant differences in the measurements between genders and between the left and right sides.Conclusions and Significance This study has established the 95%reference values for the S,V,and S/V of the MEPS in normal ears,which were 1057.10-18239.16 mm²,609.16-9854.11 mm^(3),and 1.39-2.52 mm^(-1) respectively.We found that while there is a wide variation in the V values among normal ears,there is less variability in the S/V values.This structural characteristic suggests that changes in the S/V value may have a more significant impact on the balance of middle ear pressure,and it provides important reference data for the construction and functional reconstruction of three-dimensional models of the MEPS.These findings may aid in diagnosing middle ear disorders,such as otitis media with effusion,and guide interventions to restore pressure balance.
文摘Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.
文摘The properties and the design of PWM systems are discussed. The relations among the orifice areas of the valves, initial times and the rate of piston areas are deduced. Also a PWM system is designed and some experiments are done. The experiment results agree with those of theory analyses. It can be shown that the relations are correct and the conclusion of theory analyses is reasonable.
文摘AIM: To evaluate the effect of different approaches in the treatment of achalasia in China. METHODS: We performed a systematic review and meta-analysis of Chinese literature by searching the Chinese Biomedical Database and Chinese scientific Journals database (up to March 2008). All cohort studies (controlled or uncontrolled) in which the patients were observed for more than a year were reviewed in detail. Dichotomous outcomes were reported as relative risks (RR) with 95% confidence interval (CI) for controlled trials. The efficacy in uncontrolled trials was assessed by a pooled estimate of response rate with individual studies weighted in proportion to the sample size. RESULTS: Seven controlled trials compared the effect of botulinum toxin injection (BoTx) with pneumatic dilation (PD). PD was superior to BoTx [65.2% vs 45.3%; RR 1.47 (95% CI 1.23-1.77), P < 0.0001], and had a lower clinical relapse rate (BoTx 30.2% vs PD 10%, RR 0.32 (0.16-0.65), P = 0.001). Heller myotomy (HM) had superior remission rate compared to PD [HM 94.0% vs PD 64.1%, RR 1.48 (1.15-1.99), P = 0.002]. In uncontrolled trials, the effectiveness of PD was 86.6% (23.9%) vs 94.8% (10.6%) for HM. The main complications of PD were perforation and gastroesophageal reflux disease. CONCLUSION: HM is the most effective long-term treatment for patients with achalasia in China. In the future, controlled clinical trials on the treatment of achalasia should focus on comparing laparoscopic myotomy with or without antireflux procedure,including different partial and total fundoplication techniques.
基金Supported by National Natural Science Foundation of China(Grants Nos.51675020,51375028)Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems
文摘Pneumatic system has been widely used throughout industry, and it consumes more than billions kW h of electricity one year all over the world. So as to improve the efficiency of pneumatic system, its power evaluation as well as measurement methods should be proposed, and their applicability should be validated. In this paper, firstly, power evaluation and measurement methods of pneumatic system were introduced for the first time. Secondly, based on the proposed methods, power distributions in pneumatic system was analyzed. Thirdly, through the analysis on pneumatic efficiencies of typical compressors and pneumatic components, the applicability of the proposed methods were validated. It can be concluded that, first of all, the proposed methods to evaluation and measurement the power of pneumatic system were efficient. Furthermore, the pneumatic power efficiencies of pneumatic system in the air production and cleaning procedure are respectively about 35%–75% and 85%–90%. Moreover, the pneumatic power efficiencies of pneumatic system in the transmission and consumption procedures are about 70%–85% and 10%–35%. And the total pneumatic power efficiency of pneumatic system is about 2%–20%, which varies largely with the system configuration. This paper provides a method to analyze and measure the power of pneumatic system, lay a foundation for the optimization and energy-saving design of pneumatic system.
基金Supported by National Key Scientific and Technological Project(Grant No.2010ZX04001-051-031)Key Program of National Natural Science Foundation of China((Grant No.61533014)the Innovative Research Team of Shaanxi Province,China(Grant No.2013KCT-04)
文摘With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potential in many fields. However, most existing control methods with high tracking performance need to know the model information and to use pressure sensor. This limits the application of the pneumatic servo system. An adaptive backstepping slide mode control method is proposed for pneumatic position servo system. The proposed method designs adaptive slide mode controller using backstepping design technique. The controller parameter adaptive law is derived from Lyapunov analysis to guarantee the stability of the system. A theorem is testified to show that the state of closed-loop system is uniformly bounded, and the closed-loop system is stable. The advantages of the proposed method include that system dynamic model parameters are not required for the controller design, uncertain parameters bounds are not need, and the bulk and expensive pressure sensor is not needed as well. Experimental performance, as compared with some existing methods. results show that the designed controller can achieve better tracking
基金supported by National Natural Science Foundation of China (Grant No. 50575202)
文摘The high pressure pneumatic system has been applied to special industries. It may cause errors when we analyze high pressure pneumatics under ideal gas assumption. However, the real gas effect on the performances of high pressure pneumatics is seldom investigated. In this paper, the real gas effects on air enthalpy and internal energy are estimated firstly to study the real gas effect on the energy conversion. Under ideal gas assumption, enthalpy and internal energy are solely related to air temperature. The estimation result indicates that the pressure enthalpy and pressure internal energy of real pneumatic air obviously decrease the values of enthalpy and internal energy for high pressure pneumatics, and the values of pressure enthalpy and pressure internal energy are close. Based on the relationship among pressure, enthalpy and internal energy, the real gas effects on charging and discharging processes of high pressure pneumatics are estimated, which indicates that the real gas effect accelerates the temperature and pressure decreasing rates during discharging process, and decelerates their increasing rates during charging process. According to the above analysis, and for the inconvenience in building the simulation model for real gas and the difficulty of measuring the detail thermal capacities of pneumatics, a method to compensate the real gas effect under ideal gas assumption is proposed by modulating the thermal capacity of the pneumatic container in simulation. The experiments of switching expansion reduction （SER） for high pressure pneumatics are used to verify this compensating method. SER includes the discharging process of supply tanks and the charging process of expansion tank. The simulated and experimental results of SER are highly consistent. The proposed compensation method provides a convenient way to obtain more realistic simulation results for high pressure pneumatics.
基金Supported by National Natural Science Foundation of China(Grant No.51575199)
文摘The pneumatic pressure control systems have been used in some fields. However, the researches on pneumatic pressure control mainly focus on constant pressure regulation. Poor dynamic characteristics and strong nonlinearity of such systems limit its application in the field of pressure tracking control. In order to meet the demand of generating dynamic pressure signal in the application of the hardware-in-the-loop simulation of aerospace engineering, a positive and negative pneumatic pressure servo system is provided to implement dynamic adjustment of sealed chamber pressure. A mathematical model is established with simulation and experiment being implemented afterwards to discuss the characteristics of the system, which shows serious asymmetry in the process of charging and discharging. Based on the analysis of the system dynamics, a fuzzy proportional integral derivative （PID） controller with asymmetric fuzzy compensator is proposed. Different from conventional adjusting mecha- nisms employing the error and change in error of the controlled variable as input parameters, the current cham- ber pressure and charging or discharging state are chosen as inputs of the compensator, which improves adaptability. To verify the effectiveness and performance of the pro- posed controller, the comparison experiments tracking sinusoidal and square wave commands are conducted. Experimental results show that the proposed controller can obtain better dynamic performance and relatively consis- tent control performance across the scope of work （2-140 kPa）. The research proposes a fuzzy control method to overcome asymmetry and enhance adaptability for the positive and negative pneumatic pressure servo system.
基金Supported by Henan Province Science and Technology Key Project of China(Grant Nos.202102210081,202102210082)Fundamental Research Funds for Henan Province Colleges and Universities of China(Grant No.NSFRF140120)Doctor Foundation of Henan Polytechnic University(Grant No.B2012-101).
文摘When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic system,and the energy-saving effect is verified by experiments.First,the experimental platform of a pneumatic rotary actuator servo-control system is built,and the mechanism of the valve-controlled cylinder system is analyzed.Then,the output power characteristics and load characteristics of the system are derived,and their characteristic curves are drawn.The employed air compressor is considered as a constant-pressure source of a quantitative pump,and the power characteristic of the system is matched.The power source characteristic curve should envelope the output characteristic curve and load characteristic curve.The minimum gas supply pressure obtained by power matching represents the optimal gas supply pressure.The comparative experiments under two different gas supply pressure conditions show that the system under the optimal gas supply pressure can greatly reduce energy losses.
文摘This paper presents the construction of a pneumatic active suspension system for a one-wheel car model using fuzzy reasoning and a disturbance observer. The one-wheel car model can be approximately described as a nonlinear two degrees of freedom system subject to excitation from a road profile. The active control is composed of fuzzy and disturbance controls, and the active control force is constructed by actuating a pneumatic actuator. A phase lead-lag compensator is inserted to counter the performance degradation due to the delay of the pneumatic actuator. The experimental result indicates that the proposed active suspension improves much the vibration suppression of the car model.
文摘Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure could be reduced by decreasing the ratio of length to diameter of nozzle. The friction between high speed air and pipe wall would be reduced if the nozzle is designed to be converging shape comparing with straight shape. But the volume flow and pressure, discussed in these studies, do not describe energy loss of the blowing system directly. Pneumatic power is an innovative principle to estimate pneumatic system’s energy consumption directly. Based on the above principle, a pulse blowing method is put forward for saving energy. A flow experiment is carried out, in which the high speed air flows from the pulse blowing system and continuous blowing system respectively to a plate with grease on top. Supply pressure and the volume of air used for removing the grease are measured to calculate energy consumption. From the experiment result, the pulse blowing system performs to conserve energy comparing with the continuous blowing system. The frequency and duty ratio of pulse flow influence the blowing characteristic. The pulse blowing system performs to be the most efficient at the specified frequency and duty ratio. Then a pneumatic self-oscillated method based on air operated valve is put forward to generate pulse flow. A simulation is made about dynamic modeling the air operated valve and calculating the motion of the valve core and output pressure. The simulation result verifies the system to be able to generate pulse flow, and predicts the key parameters of the frequency and duty ratio measured by experiment well. Finally, on the basis of simplifying and solution of the pulse blowing system’s mathematic model, the relationship between system’s frequency duty ratio and the dimensions of components is simply described with four algebraic equations. The system could be designed with specified frequency and duty ratio according to the four equations. This study provides theoretical basis for designing energy-saving air blowing system.
基金Project(50375034) supported by the National Natural Science Foundation of China
文摘The pneumatic rotary position system, in which an electro-pneumatic proportional flow valve controled a rotary cylinder, was studied, and its mathematical model was built. The model indicated that the controlled pneumatic system had disadvantages such as inherent non-linearity and variations of system parameters with working points. In order to improve the dynamic performance of the system, feed forward compensation self-tuning pole-placement strategy was adopted to place the poles of the system in a desired position in real time, and a recursive least square method with fixed forgetting factors was also used in the parameter estimation. Experimental results show that the steady state error of the pneumatic rotary position system is within 3% and the identified system parameters can be converged in 5 s. Under different loads, the controlled system has an excellent tracking performance and robustness of anti-disturbance.
基金Guangdong-Hong Kong Technology Cooperation Funding Scheme (No.2005A10207005, IID 2004-0005)the Research Grants Council of Hong Kong (No.9040407)
文摘In this paper, a novel control law is presented, which uses neural-network techniques to approximate the affine class nonlinear system having unknown or uncertain dynamics and noise disturbances. It adopts an adaptive control law to adjust the network parameters online and adds another control component according to H-infinity control theory to attenuate the disturbance. This control law is applied to the position tracking control of pneumatic servo systems. Simulation and experimental results show that the tracking precision and convergence speed is obviously superior to the results by using the basic BP-network controller and self-tuning adaptive controller.
基金The National High Technology Research and Development Program of China(863Program)(No.2004AA404013)
文摘The development of active endoscopy techniques is one important area of medical robot.This paper designed a new flexible and active endoscopy robotic system for direct tracheal inspection.The mobile mechanism of the robot is based on the inchworm movement actuated by pneumatic rubber actuator.There are five air chambers controlled independently,by adjusting pressures in air chambers,the robot can move in a straight mode or in a bending mode.The inspection sensors and some therapy surgery tools can be equipped in the front of the robot.The prototype was made and its mechanical characteristics were analyzed.The robot could move smoothly in a small plastic tube,and the robot is respectable to be used for inspection in human trachea directly.
基金supported by Doctor Innovation Fund of Nanjing University of Science and Technology of China(Grant No. 20080407)Joint-PhD Program of China Scholarship Council(Grant No.2008104777)
文摘The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not adjustable and the energy consumption does not adapt to the real time sewerage requirement. Therefore, it is important to study the sewerage force adjustment to improve the energy efficiency. This paper proposes an energy conservation design in vacuum sanitation systems with pneumatic ejector circuits. The sewerage force is controlled by changing the systematic vacuum degree according to the amount of the excreta. In particular, the amount of the excreta is tested by liquid level sensor and mass sensor. According to the amount of the excreta, the relationship between the excreta amount and the sewerage force is studied to provide proper propulsive force. In the other aspect, to provide variable vacuum degrees for different sanitation requirements, the suction and discharge system is designed with pneumatic vacuum ejector. On the basis of the static flow-rate characteristics and the vacuum generation model, the pressure response in the ejector circuit is studied by using the static flow rate characteristics of the ejector and air status equation. The relationship is obtained between supplied compressed air and systematic vacuum degree. When the compressed air is supplied to the ejector continuously, the systematic vacuum degree increases until the vacuum degree reaches the extreme value. Therefore, the variable systematic vacuum degree is obtained by controlling the compressed air supply of the ejector. To verify the effect of energy conservation, experiments are carried out in the artificial excreta collection, and the variable vacuum-degree design saves more than 30% of the energy supply. The energy conservation is realized effectively in the new vacuum sanitation systems with good application prospect. The proposed technology provides technological support for the energy conservation of vacuum sanitation systems.
基金National Key Research and Development Project(Grant No.2021YFC0122502)Youth Fund of National Natural Science Foundation of China(Grant Nos.52105044,52105046).
文摘The pneumatic vibration isolator(PVI)plays an increasingly important role in precision manufacturing.In this paper,aiming to detect the performance of the pressure regulator in the PVI system,a PVI testing system with a pressure regulator is designed and developed.Firstly,the structure of the pneumatic spring is presented and analyzed,and the nonlinear stiffness is obtained based on the ideal gas model and material mechanics.Then,according to the working principle and continuity equations of ideal airflow,a dynamic model of the PVI system with a pressure regulator is established.Through the simulation analysis,the vibration isolation performance is improved with the efficient and precise pressure regulator.The average values of both the vibration velocity and transmission rate decrease when the vibration is set to 4,10,20 and 40 Hz,respectively.The experiments demonstrate the reliability and effectiveness of the pressure regulator.This achievement will become an important basis for future research concerning precision manufacturing.
