The physical process of a single-stage planar-pulsed-inductive accelerator is investigated.Measurements include the waveforms of circuit current,capacitor voltage,plasma radiation intensity,and temporal plasma structu...The physical process of a single-stage planar-pulsed-inductive accelerator is investigated.Measurements include the waveforms of circuit current,capacitor voltage,plasma radiation intensity,and temporal plasma structure photos captured by a high-speed camera.Experiments are conducted under static ambient fill condition using argon as propellant.Varied values of capacitor voltage and gas pressure are compared.Further discussions quantify the EM interaction between circuit and plasma,as well as their energy deposition and current sheet acceleration.Based on the results of experiments,physical mechanisms of the initial ionization phase and the following acceleration phase are analyzed theoretically.展开更多
A pin-like beam is a kind of structured light with a special intensity distribution that can be against diffraction,which can be seen as a kind of quasi-nondiffracting beam(Q-NDB).Due to its wide applications,recently...A pin-like beam is a kind of structured light with a special intensity distribution that can be against diffraction,which can be seen as a kind of quasi-nondiffracting beam(Q-NDB).Due to its wide applications,recently,numerous researchers have used optical lenses or on-chip integrated optical diffractive elements to generate this kind of beam.We theoretically verify and experimentally demonstrate an all-fiber solution to generate a subwavelength inverted pin beam by integrating a simple plasma structure on the fiber end surface.The output beams generated by two kinds of plasma structures,i.e.,nanoring slot and nanopetal structure,are investigated and measured experimentally.The results show that both the structures are capable of generating subwavelength beams,and the beam generated using the nanopetal structure has the sidelobe suppression ability along the x-axis direction.Our all-fiber device can be flexibly inserted into liquid environments such as cell cultures,blood,and biological tissue fluids to illuminate or stimulate biological cells and molecules in them.It provides a promising fiber-integrated solution for exploring light–matter interaction with subwavelength resolution in the field of biological research.展开更多
Inductive-pulsed plasma thruster is an in-space propulsion device that generates thrust by ionizing and accelerating plasma through pulsed electromagnetic field.In this paper,the correlation between plasma structure e...Inductive-pulsed plasma thruster is an in-space propulsion device that generates thrust by ionizing and accelerating plasma through pulsed electromagnetic field.In this paper,the correlation between plasma structure evolution and magnetic field permeability is studied using a B-dot probe array system,combing with high-speed camera and electrical parameter measurement.Further discussions explained the mechanism how the magnetic permeation characteristics affect the energy deposition between circuit and plasma.展开更多
In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transm...In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, X-ray diffraction（XRD）, and atomic force microscopy（AFM） were used to investigate the phases and microstructure of the as-sprayed, APS-deposited Co Ni Cr Al Y bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in Co Ni Cr Al Y bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.展开更多
Branching structure(BS)is a very important phenomenon in the evolution of equatorial plasma bubbles(EPBs),the mechanism of which is widely studied from observation and from simulation.However,occurrence characteristic...Branching structure(BS)is a very important phenomenon in the evolution of equatorial plasma bubbles(EPBs),the mechanism of which is widely studied from observation and from simulation.However,occurrence characteristics of branching structure of equatorial plasma bubbles(BSEPBs)have not been well addressed.In this work,we used seven-years(2012-2018)of observations from two all-sky imagers to study occurrence of BSEPBs in detail.These data reveal a high incidence of BS in EPB cases;in particular,most EPBs occurring on days with geomagnetic disturbances exhibited BS.Periods when all EPBs exhibited BS increased significantly in the 2014 solar maximum.Occurrence times of BSEPBs varied with local time;most of the BSEPBs began to appear between 21:00 and 22:00 LT.During the solar maximum,some BSEPBs were observed after midnight.The data also reveal that BSEPBs are characterized primarily by two branches or three branches.Multi-branching appeared only in the solar maximum.EPB events with different coexisting branching structures increased from 2012 to 2014 and decreased from 2014 to 2018.These results strongly suggest that BSEPB occurrence is related to solar activity and geomagnetic activity,and thus provide a new perspective for future studies of EPBs as well as enriching our understanding of ionospheric irregularity.展开更多
A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers...A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.展开更多
The lattice structure image of a plasma standing wave in a Purcell cavity of silicon is observed. The plasma wave produced by the pulsed laser could be used to fabricate the micro-nanostructure of silicon. The plasma ...The lattice structure image of a plasma standing wave in a Purcell cavity of silicon is observed. The plasma wave produced by the pulsed laser could be used to fabricate the micro-nanostructure of silicon. The plasma lattice structures induced by the nanosecond pulsed laser in the cavity may be similar to the Wigner crystal structure. It is interesting that the beautiful diffraction pattern could be observed in the plasma lattice structure. The radiation lifetime could be shortened to the nanosecond range throughout the entire spectral range and the relaxation time could be lengthened for higher emission efficiency in the Purcell cavity, which results in the fact that the plasmonic emission is stronger and its threshold is lower.展开更多
The polybutylaldehyde obtained by plasma polymerization was investigated by means of IR, X-ray diffraction, GC-MS, elementary analysis, TEM, electron diffraction and contact angle measurements etc. The results showed ...The polybutylaldehyde obtained by plasma polymerization was investigated by means of IR, X-ray diffraction, GC-MS, elementary analysis, TEM, electron diffraction and contact angle measurements etc. The results showed that the polymer formed in plasma is amorphous crosslinked polymer, and its backbone is made of carbon atoms. The surface energy of the polymer film is independent of the polymerization conditions. No addition reaction has taken place in the carbonyl group of butylaldehyde in the plasma condition. The result of the wettability measurements showed that the polymer film is generally hydrophobic and the surface energy of the film is about 41 dyn/cm, in which the dispersion force contribution is the majority. The electron diffraction proved that some crystal substance, even the single crystals were present in the polymer. X-ray diffraction also proved the presence of crystal and showed about 15% crystaUinity fraction.展开更多
A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding...A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding numerical simulations.Considerable intensification on receiving signal gain up to -10 d B in comparison with that without the plasma modulation is observed experimentally in -1 GHz RF band,with an effective enhancement bandwidth of -340 MHz and the fractional bandwidth of -34%.Then,the optimal modulation parameters of plasma are further studied by a numerical simulation.It is shown that the number density,the layer thickness,and the collision frequency of the plasma,as well as the relative distance between the plasma layer and antenna synergistically affect the modulation.Compared to the metallic antenna with the same overall dimension,the modulated antenna covered by the subwavelength plasma structure features higher receiving efficiency and lower radar cross section in the studied RF band.The mechanism of the reception enhancement is further revealed by analyzing characteristics of electromagnetic scattering and electric field distribution in the subwavelength plasma layer.The results then exhibit scientific significance and application potential of sub-wavelength plasma modulation on compact receiving antennas with higher performance and better feature of radar stealth.展开更多
The effects of working pressure on the composition, structure and surface morphology properties of CuInSe2 （CIS） films selenized with a plasma-assisted selenization process is investigated. Higher selenium content, ...The effects of working pressure on the composition, structure and surface morphology properties of CuInSe2 （CIS） films selenized with a plasma-assisted selenization process is investigated. Higher selenium content, better crystalline quality and much more regular surface particles compared to the others are found in the CIS film with 40 Pa working pressure. A Cu（In,Ga）Se2 device fabricated with the optimized plasma-assisted selenization process is demonstrated to be better than our previous result. After discussion, the reason for these phenomena is attributed to the compromise of electron temperature and plasma density.展开更多
At present,spark plugs are used to trigger discharge in pulsed plasma thrusters（PPT）,which are known to be life-limiting components due to plasma corrosion and carbon deposition.A strong electric field could be form...At present,spark plugs are used to trigger discharge in pulsed plasma thrusters（PPT）,which are known to be life-limiting components due to plasma corrosion and carbon deposition.A strong electric field could be formed in a cathode triple junction（CTJ） to achieve a trigger function under vacuum conditions.We propose an induction-triggered electrode structure on the basis of the CTJ trigger principle.The induction-triggered electrode structure could increase the electric field strength of the CTJ without changing the voltage between electrodes,contributing to a reduction in the electrode breakdown voltage.Additionally,it can maintain the plasma generation effect when the breakdown voltage is reduced in the discharge experiments.The induction-triggered electrode structure could ensure an effective trigger when the ablation distance of Teflon increases,and the magnetic field produced by the discharge current could further improve the plasma density and propagation velocity.The induction-triggered coaxial PPT we propose has a simplified trigger structure,and it is an effective attempt to optimize the micro-satellite thruster.展开更多
The La2Ti2O7：Pr^3＋, which emits red color luminescence upon UV light excitation, is prepared by the conventional high-temperature solid-state method and its luminescent properties are systematically investigated. X-...The La2Ti2O7：Pr^3＋, which emits red color luminescence upon UV light excitation, is prepared by the conventional high-temperature solid-state method and its luminescent properties are systematically investigated. X-ray diffraction, photoluminescence, afterglow emission spectra and long-lasting phosphorescence （LLP） decay curves are used to characterize this phosphor. After irradiation by a 290-nm UV light for 3 rain, the Pr^3＋-doped La2Ti2O7 phosphor emits intense red emitting afterglow from the ^1D2 →^ 3H4 transitions, and its afterglow can be seen with the naked eye in the dark clearly for more than 1 h after removal of the excitation source. The afterglow decay curve of the Pr^3＋-doped La2Ti2O7 phosphor contains a fast decay component and another slow decay one. The possible mechanism of this red light emitting LLP phosphor is also discussed based on the experimental results.展开更多
CrN microspheres were synthesized by using a cathodic arc plasma source system. The obtained samples were annealed in air at temperatures of 300-800 ℃ for 60 min. The influence of annealing temperature on the microst...CrN microspheres were synthesized by using a cathodic arc plasma source system. The obtained samples were annealed in air at temperatures of 300-800 ℃ for 60 min. The influence of annealing temperature on the microstructure and surface morphology of the CrN microspheres was investigated. The CrN microspheres were characterized by means of scanning electron microscopy, transmission electron microscopy and X-ray diffraction analysis. The results show that the CrN nanoparticles arranged into leaf-like structures before annealing. With the rising of the annealing temperature, the size of CrN crystal nanoparticals became larger. When the annealing temperature exceeded the oxidation point（500 ℃）, the CrN was oxidized and the leaf-like structure was broken. With further increase of the annealing temperature（700 ℃）, the arrangement of CrN nanoparticles was changed from leaf-like structure to be discrete.展开更多
Engineered targets are expected to play a key role in future high-power laser experiments calling for joined, extensive knowledge in materials properties, engineering techniques and plasma physics. In this work, we pr...Engineered targets are expected to play a key role in future high-power laser experiments calling for joined, extensive knowledge in materials properties, engineering techniques and plasma physics. In this work, we propose a novel patterning procedure of self-supported 10 μm thick Au and Cu foils for obtaining micrometre-sized periodic gratings as targets for high-power laser applications. Accessible techniques were considered, by using cold rolling, electronbeam lithography and the Ar-ion milling process. The developed patterning procedure allows efficient control of the grating and foil surface on large area. Targets consisting of patterned regions of 450 μm × 450 μm, with 2 μm periodic gratings, were prepared on 25 mm × 25 mm Au and Cu free-standing foils, and preliminary investigations of the microtargets interacting with an ultrashort, relativistic laser pulse were performed. These test experiments demonstrated that,in certain conditions, the micro-gratings show enhanced laser energy absorption and higher efficiency in accelerating charge particle beams compared with planar thin foils of similar thickness.展开更多
基金Project supported by the Hunan Provincial Natural Science Foundation of China(Grant No.2018JJ3592).
文摘The physical process of a single-stage planar-pulsed-inductive accelerator is investigated.Measurements include the waveforms of circuit current,capacitor voltage,plasma radiation intensity,and temporal plasma structure photos captured by a high-speed camera.Experiments are conducted under static ambient fill condition using argon as propellant.Varied values of capacitor voltage and gas pressure are compared.Further discussions quantify the EM interaction between circuit and plasma,as well as their energy deposition and current sheet acceleration.Based on the results of experiments,physical mechanisms of the initial ionization phase and the following acceleration phase are analyzed theoretically.
基金supported by the National Natural Science Foundation of China (Grant Nos.62205079,62065006,62125503,and 62261160388)the Natural Science Foundation of Hubei Province of China (Grant No.2023AFA028)+1 种基金the Innovation Project of GUET Graduate Education (Grant No.2023YCXS214)the Innovation Project of Optics Valley Laboratory (Grant No.OVL2021BG004).
文摘A pin-like beam is a kind of structured light with a special intensity distribution that can be against diffraction,which can be seen as a kind of quasi-nondiffracting beam(Q-NDB).Due to its wide applications,recently,numerous researchers have used optical lenses or on-chip integrated optical diffractive elements to generate this kind of beam.We theoretically verify and experimentally demonstrate an all-fiber solution to generate a subwavelength inverted pin beam by integrating a simple plasma structure on the fiber end surface.The output beams generated by two kinds of plasma structures,i.e.,nanoring slot and nanopetal structure,are investigated and measured experimentally.The results show that both the structures are capable of generating subwavelength beams,and the beam generated using the nanopetal structure has the sidelobe suppression ability along the x-axis direction.Our all-fiber device can be flexibly inserted into liquid environments such as cell cultures,blood,and biological tissue fluids to illuminate or stimulate biological cells and molecules in them.It provides a promising fiber-integrated solution for exploring light–matter interaction with subwavelength resolution in the field of biological research.
基金Project supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.T2221002)the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.12305286)。
文摘Inductive-pulsed plasma thruster is an in-space propulsion device that generates thrust by ionizing and accelerating plasma through pulsed electromagnetic field.In this paper,the correlation between plasma structure evolution and magnetic field permeability is studied using a B-dot probe array system,combing with high-speed camera and electrical parameter measurement.Further discussions explained the mechanism how the magnetic permeation characteristics affect the energy deposition between circuit and plasma.
基金provided by Technical Education Quality Improvement Programme-Ⅱ(TEQIP-Ⅱ)at MNNIT Allahabad
文摘In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, X-ray diffraction（XRD）, and atomic force microscopy（AFM） were used to investigate the phases and microstructure of the as-sprayed, APS-deposited Co Ni Cr Al Y bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in Co Ni Cr Al Y bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.
基金supported by the Youth Science and Technology Innovation Foundation of NSSCthe International Partnership Program of Chinese Academy of Sciences(183311KYSB20200003)+1 种基金the National Natural Science Foundation of China(41831073 and 42004138)the Open Research Project of Large Research Infrastructures of CAS–“Study on the interaction between low/mid-latitude atmosphere and ionosphere based on the Chinese Meridian Project”。
文摘Branching structure(BS)is a very important phenomenon in the evolution of equatorial plasma bubbles(EPBs),the mechanism of which is widely studied from observation and from simulation.However,occurrence characteristics of branching structure of equatorial plasma bubbles(BSEPBs)have not been well addressed.In this work,we used seven-years(2012-2018)of observations from two all-sky imagers to study occurrence of BSEPBs in detail.These data reveal a high incidence of BS in EPB cases;in particular,most EPBs occurring on days with geomagnetic disturbances exhibited BS.Periods when all EPBs exhibited BS increased significantly in the 2014 solar maximum.Occurrence times of BSEPBs varied with local time;most of the BSEPBs began to appear between 21:00 and 22:00 LT.During the solar maximum,some BSEPBs were observed after midnight.The data also reveal that BSEPBs are characterized primarily by two branches or three branches.Multi-branching appeared only in the solar maximum.EPB events with different coexisting branching structures increased from 2012 to 2014 and decreased from 2014 to 2018.These results strongly suggest that BSEPB occurrence is related to solar activity and geomagnetic activity,and thus provide a new perspective for future studies of EPBs as well as enriching our understanding of ionospheric irregularity.
基金Funded by the National Natural Science Foundation of China(51572208)the 111 Project(B13035)+1 种基金the National Natural Science Foundation of Hubei Province(2014CFB257 and 2014CFB258)the Fundamental Research Funds for the Central Universities(WUT:2015-III-059)
文摘A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11264007 and 61465003)
文摘The lattice structure image of a plasma standing wave in a Purcell cavity of silicon is observed. The plasma wave produced by the pulsed laser could be used to fabricate the micro-nanostructure of silicon. The plasma lattice structures induced by the nanosecond pulsed laser in the cavity may be similar to the Wigner crystal structure. It is interesting that the beautiful diffraction pattern could be observed in the plasma lattice structure. The radiation lifetime could be shortened to the nanosecond range throughout the entire spectral range and the relaxation time could be lengthened for higher emission efficiency in the Purcell cavity, which results in the fact that the plasmonic emission is stronger and its threshold is lower.
基金Project sponsored by the National Natural Science Foundation of China.
文摘The polybutylaldehyde obtained by plasma polymerization was investigated by means of IR, X-ray diffraction, GC-MS, elementary analysis, TEM, electron diffraction and contact angle measurements etc. The results showed that the polymer formed in plasma is amorphous crosslinked polymer, and its backbone is made of carbon atoms. The surface energy of the polymer film is independent of the polymerization conditions. No addition reaction has taken place in the carbonyl group of butylaldehyde in the plasma condition. The result of the wettability measurements showed that the polymer film is generally hydrophobic and the surface energy of the film is about 41 dyn/cm, in which the dispersion force contribution is the majority. The electron diffraction proved that some crystal substance, even the single crystals were present in the polymer. X-ray diffraction also proved the presence of crystal and showed about 15% crystaUinity fraction.
基金supported by National Natural Science Foundation of China(Nos.51577044 and 11605035)
文摘A novel technique based on sub-wavelength plasma structure effects on enhancement of RF communication signals on a receiving antenna is carried out in this paper in laboratory experiments and analyzed by corresponding numerical simulations.Considerable intensification on receiving signal gain up to -10 d B in comparison with that without the plasma modulation is observed experimentally in -1 GHz RF band,with an effective enhancement bandwidth of -340 MHz and the fractional bandwidth of -34%.Then,the optimal modulation parameters of plasma are further studied by a numerical simulation.It is shown that the number density,the layer thickness,and the collision frequency of the plasma,as well as the relative distance between the plasma layer and antenna synergistically affect the modulation.Compared to the metallic antenna with the same overall dimension,the modulated antenna covered by the subwavelength plasma structure features higher receiving efficiency and lower radar cross section in the studied RF band.The mechanism of the reception enhancement is further revealed by analyzing characteristics of electromagnetic scattering and electric field distribution in the subwavelength plasma layer.The results then exhibit scientific significance and application potential of sub-wavelength plasma modulation on compact receiving antennas with higher performance and better feature of radar stealth.
基金Supported by the National High-Tech Research and Development Program of China under Grant No 2004AA513020, the National Natural Science Foundation of China under Grant No 60906033, and the Specialized Research Fund for the Doctoral Program of Higher Education （00800551008）
文摘The effects of working pressure on the composition, structure and surface morphology properties of CuInSe2 （CIS） films selenized with a plasma-assisted selenization process is investigated. Higher selenium content, better crystalline quality and much more regular surface particles compared to the others are found in the CIS film with 40 Pa working pressure. A Cu（In,Ga）Se2 device fabricated with the optimized plasma-assisted selenization process is demonstrated to be better than our previous result. After discussion, the reason for these phenomena is attributed to the compromise of electron temperature and plasma density.
基金National Natural Science Foundation of China(No.51577011)the Graduate Innovation Project of Beijing Jiaotong University(No.2016YJS147) for the financial support of this work
文摘At present,spark plugs are used to trigger discharge in pulsed plasma thrusters（PPT）,which are known to be life-limiting components due to plasma corrosion and carbon deposition.A strong electric field could be formed in a cathode triple junction（CTJ） to achieve a trigger function under vacuum conditions.We propose an induction-triggered electrode structure on the basis of the CTJ trigger principle.The induction-triggered electrode structure could increase the electric field strength of the CTJ without changing the voltage between electrodes,contributing to a reduction in the electrode breakdown voltage.Additionally,it can maintain the plasma generation effect when the breakdown voltage is reduced in the discharge experiments.The induction-triggered electrode structure could ensure an effective trigger when the ablation distance of Teflon increases,and the magnetic field produced by the discharge current could further improve the plasma density and propagation velocity.The induction-triggered coaxial PPT we propose has a simplified trigger structure,and it is an effective attempt to optimize the micro-satellite thruster.
基金Supported by the National Natural Science Foundations of China under Grant No 50872130.
文摘The La2Ti2O7：Pr^3＋, which emits red color luminescence upon UV light excitation, is prepared by the conventional high-temperature solid-state method and its luminescent properties are systematically investigated. X-ray diffraction, photoluminescence, afterglow emission spectra and long-lasting phosphorescence （LLP） decay curves are used to characterize this phosphor. After irradiation by a 290-nm UV light for 3 rain, the Pr^3＋-doped La2Ti2O7 phosphor emits intense red emitting afterglow from the ^1D2 →^ 3H4 transitions, and its afterglow can be seen with the naked eye in the dark clearly for more than 1 h after removal of the excitation source. The afterglow decay curve of the Pr^3＋-doped La2Ti2O7 phosphor contains a fast decay component and another slow decay one. The possible mechanism of this red light emitting LLP phosphor is also discussed based on the experimental results.
基金Supported by the National Natural Science Foundation of China(11205116)the International Cooperation Program of Ministry of Science and Technology of China(2011DFR50580)
文摘CrN microspheres were synthesized by using a cathodic arc plasma source system. The obtained samples were annealed in air at temperatures of 300-800 ℃ for 60 min. The influence of annealing temperature on the microstructure and surface morphology of the CrN microspheres was investigated. The CrN microspheres were characterized by means of scanning electron microscopy, transmission electron microscopy and X-ray diffraction analysis. The results show that the CrN nanoparticles arranged into leaf-like structures before annealing. With the rising of the annealing temperature, the size of CrN crystal nanoparticals became larger. When the annealing temperature exceeded the oxidation point（500 ℃）, the CrN was oxidized and the leaf-like structure was broken. With further increase of the annealing temperature（700 ℃）, the arrangement of CrN nanoparticles was changed from leaf-like structure to be discrete.
基金supported by the ELI-NP Phase Ⅱ project,co-financed by the Romanian Government and the European Union through the European Regional Development Fund-the Competitiveness Operational Programme(contract No.1/07.07.2016,COP,ID 1334)Funding from the National Program‘Installations and Strategic Objectives of National Interest’and‘Nucleu’project PN19060105 of the Romanian Governmentfunding from the European Union Framework Programme for Research and Innovation Horizon 2020 under grant agreement No.871161.
文摘Engineered targets are expected to play a key role in future high-power laser experiments calling for joined, extensive knowledge in materials properties, engineering techniques and plasma physics. In this work, we propose a novel patterning procedure of self-supported 10 μm thick Au and Cu foils for obtaining micrometre-sized periodic gratings as targets for high-power laser applications. Accessible techniques were considered, by using cold rolling, electronbeam lithography and the Ar-ion milling process. The developed patterning procedure allows efficient control of the grating and foil surface on large area. Targets consisting of patterned regions of 450 μm × 450 μm, with 2 μm periodic gratings, were prepared on 25 mm × 25 mm Au and Cu free-standing foils, and preliminary investigations of the microtargets interacting with an ultrashort, relativistic laser pulse were performed. These test experiments demonstrated that,in certain conditions, the micro-gratings show enhanced laser energy absorption and higher efficiency in accelerating charge particle beams compared with planar thin foils of similar thickness.
