Precision drilling with picosecond laser has been advocated to significantly improve the quality of micro-holes with reduced recast layer thickness and almost no heat affected zone.However,a detailed comparison betwee...Precision drilling with picosecond laser has been advocated to significantly improve the quality of micro-holes with reduced recast layer thickness and almost no heat affected zone.However,a detailed comparison between nanosecond and picosecond laser drilling techniques has rarely been reported in previous research.In the present study,a series of micro-holes are manufactured on stainless steel 304 using a nanosecond and a picosecond laser drilling system,respectively.The quality of the micro-holes,e.g.,recast layer,micro-crack,circularity,and conicity,etc,is evaluated by employing an optical microscope,an optical interferometer,and a scanning electron microscope.Additionally,the micro-structure of the samples between the edges of the micro-holes and the parent material is compared following etching treatment.The researching results show that a great amount of spattering material accumulated at the entrance ends of the nanosecond laser drilled micro-holes.The formation of a recast layer with a thickness of;5μm is detected on the side walls,associated with initiation of micro-cracks.Tapering phenomenon is also observed and the circularity of the micro-holes is rather poor.With regard to the micro-holes drilled by picosecond laser,the entrance ends,the exit ends,and the side walls are quite smooth without accumulation of spattering material,formation of recast layer and micro-cracks.The circularity of the micro-holes is fairly good without observation of tapering phenomenon.Furthermore,there is no obvious difference as for the micro-structure between the edges of the micro-holes and the parent material.This study proposes a picosecond laser helical drilling technique which can be used for effective manufacturing of high quality micro-holes.展开更多
Fog harvesting has been considered as a promising method for solving water crisis in underdeveloped regions.To mimic and optimize the alleged natural fog harvesting ability of the stenocara beetle,hybrid superhydropho...Fog harvesting has been considered as a promising method for solving water crisis in underdeveloped regions.To mimic and optimize the alleged natural fog harvesting ability of the stenocara beetle,hybrid superhydrophobic(hydrophobic,superhydrophilic)/hydrophilic patterns are processed on stainless steel via picosecond laser direct writing.Basically,after laser processing,the surfaces of stainless steel change from hydrophilic to superhydrophilic.Then,after chemical and heat treatment,the superhydrophilic surfaces become superhydrophobic with ultra-low adhesion,and superhydrophobic(hydrophobic)with ultra-high adhesion,respectively.This work systematically examines the fog harvesting ability of picosecond laser treated surfaces(LTS),pristine surfaces(PS),laser and chemical treated surfaces(LCTS),laser and heat-treated surfaces(LHTS).Compared with the PS,the as-prepared surfaces enhanced the fog harvesting efficiency by 50%.This work provides a fast and simple method to fog collectors,which offer a great opportunity to develop water harvesters for real world applications.展开更多
Silicon infiltrated silicon carbide （Si-SiC） ceramics, as high hardness materials, are difficult to machine, especially drilling micro-holes. In this study, the interaction of picosecond laser pulses （1 ps at 1 030...Silicon infiltrated silicon carbide （Si-SiC） ceramics, as high hardness materials, are difficult to machine, especially drilling micro-holes. In this study, the interaction of picosecond laser pulses （1 ps at 1 030 nm） with Si-SiC ceramics was investigated. Variations of the diameter and depth of circular holes with the growth of the laser energy density were obtained. The results indicate that the increase of machining depth follows a nonlinear relation with the increasing of laser energy density, while the diameter has little change with that. Moreover, it is found that some debris and particles are deposited around and inside the holes and waviness is in the entrance and at walls of the holes after laser processing.展开更多
The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed duri...The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed during the laser and colorseparation processes in order to develop practical laser coloring applications.Due to the high oxidation sensitivity of Labasedmetallic glass,it can broaden the color range but make it more complex.Structure coloring by laser processing on thesurface of La-based metallic glass can be conducted after thermoplastic forming.It is particularly important to clarify therole of structure and composition in the surface coloring process.The aim is to study the relationship between amorphoussurface structural color,surface geometry,and oxide formation by laser processing in metallic glasses.The findings revealedthat the periodic structure primarily determines the surface color at laser energy densities below 1.0 J/mm^(2).In contrast,thesurface color predominantly depends on the proportion of oxides that are formed when energy densities exceed 1.0 J/mm^(2).Consequently,this study provides a novel concept for the fundamental investigation of laser coloring and establishes a newavenue for practical application.展开更多
In this investigation,a picosecond laser was employed to fabricate surface textures on a Stavax steel substrate,which is a key material for mold fabrication in the manufacturing of various polymer products.Three main ...In this investigation,a picosecond laser was employed to fabricate surface textures on a Stavax steel substrate,which is a key material for mold fabrication in the manufacturing of various polymer products.Three main types of surface textures were fabricated on a Stavax steel substrate:periodic ripples,a two-scale hierarchical two-dimensional array of micro-bumps,and a micro-pits array with nanoripples.The wettability of the laser-textured Stavax steel surface was converted from its original hydrophilicity into hydrophobicity and even super-hydrophobicity after exposure to air.The results clearly show that this super-hydrophobicity is mainly due to the surface textures.The ultrafast laserinduced catalytic effect may play a secondary role in modifying the surface chemistry so as to lower the surface energy.The laser-induced surface textures on the metal mold substrates were then replicated onto polypropylene substrates via the polymer injection molding process.The surface wettability of the molded polypropylene was found to be changed from the original hydrophilicity to superhydrophobicity.This developed process holds the potential to improve the performance of fabricated plastic products in terms of wettability control and easy cleaning.展开更多
Multilayer dielectric gratings typically remove multiple-grating pillars after picosecond laser irradiation;however,the dynamic formation process of the removal is still unclear.In this study,the damage morphologies o...Multilayer dielectric gratings typically remove multiple-grating pillars after picosecond laser irradiation;however,the dynamic formation process of the removal is still unclear.In this study,the damage morphologies of multilayer dielectric gratings induced by an 8.6-ps laser pulse were closely examined.The damage included the removal of a single grating pillar and consecutive adjacent grating pillars and did not involve the destruction of the internal high-reflection mirror structure.Comparative analysis of the two damage morphological characteristics indicated the removal of adjacent pillars was related to an impact process caused by the eruption of localized materials from the left-hand pillar,exerting impact pressure on its adjacent pillars and eventually resulting in multiple pillar removal.A finite-element strain model was used to calculate the stress distribution of the grating after impact.According to the electric field distribution,the eruptive pressure of the dielectric materials after ionization was also simulated.The results suggest that the eruptive pressure resulted in a stress concentration at the root of the adjacent pillar that was sufficient to cause damage,corresponding to the experimental removal of the adjacent pillar from the root.This study provides further understanding of the laser-induced damage behavior of grating pillars and some insights into reducing the undesirable damage process for practical applications.展开更多
The influence of the picosecond(ps) pulsed burst with a nanosecond scale of temporal separation(50 ns) on filamentary traces in sapphire substrate is investigated. The spatiotemporal evolution of the filamentary plasm...The influence of the picosecond(ps) pulsed burst with a nanosecond scale of temporal separation(50 ns) on filamentary traces in sapphire substrate is investigated. The spatiotemporal evolution of the filamentary plasma string induced by sub-pulses of the burst-mode is revealed according to the analysis of the instantaneous photoluminescence images. Due to the presence of residual plasma, the energy loss of sub-pulse during the balancing of self-focusing effect is reduced, and thus refreshes the plasma via refocusing. The refreshed plasma peak generated by the subsequent subpulse appears at relatively low density positions in the formed filamentary plasma string, which results in more uniform densities and less spatial overlap among the plasma peaks. The continuity and uniformity of the filamentary trace in sapphire are enhanced by the burst-mode. Besides, the burst filamentary propagation can also remain effective when the sub-pulse energy is below the self-focusing threshold. Based on this uniform and precise energy propagation mode, the feasibility of its use for the laser lift-off(LLO) process is verified.展开更多
We report on the modification of the wettability of stainless steel by picosecond laser surface microstructuring in this paper. Compared with traditional methods, picosecond laser-induced surface modification provides...We report on the modification of the wettability of stainless steel by picosecond laser surface microstructuring in this paper. Compared with traditional methods, picosecond laser-induced surface modification provides a fast and facile method for surface modification without chemical damage and environmental pollution. As a result of treatment by 100 ps laser pulses, microstructures are fabricated on the stainless steel sample surface, contributing to the increase of the contact angle from 88° to 105°, which realizes a transformation from hydrophilicity to hydrophobicity. The morphological features of fabricated microstructures are characterized by scanning electron microscopy and optical microscopy.展开更多
As an intense picosecond laser pulse irradiates a hydrocarbon target,the protons therein can be accelerated by the radiation pressure as well as the sheath field behind the target.We investigate the effect of the lase...As an intense picosecond laser pulse irradiates a hydrocarbon target,the protons therein can be accelerated by the radiation pressure as well as the sheath field behind the target.We investigate the effect of the laser and hydrocarbon target parameters on proton acceleration with two/threedimensional particle-in-cell simulations.It is found that the resulting two-ion species plasma can generate a multiple peaked charge-separation field that accelerates the protons.In particular,a smaller carbon-to-hydrogen ratio,as well as the thinner and/or lower density of the target,leads to a larger sheath field and thus proton beams with a larger cutoff energy and smoother energy spectrum.These results may be useful in achieving high-flux quasi-monoenergetic proton beams by properly designing the hydrocarbon target.展开更多
A growing number of skin laser treatments have rapidly evolved and increased their role in the field of dermatology,laser treatment is considered to be used for a variety of pigmentary dermatosis as well as aesthetic ...A growing number of skin laser treatments have rapidly evolved and increased their role in the field of dermatology,laser treatment is considered to be used for a variety of pigmentary dermatosis as well as aesthetic problems.The standardized assessment of laser treatment efficacy is crucial for the interpretation and comparison of studies related to laser treatment of skin disorders.In this study,we propose an evaluation method to quantitatively assess laser treatment efficacy based on the image segmentation technology.A tattoo model of Sprague Dawley(SD)rats was established and treated by picosecond laser treatments at varying energy levels.Images of the tattoo models were captured before and after laser treatment,and feature extraction was conducted to quantify the tattooed area and pigment gradation.Subsequently,the clearance rate,which has been a standardized parameter,was calculated.The results indicate that the clearance rates obtained through this quantitative algorithm are comparable and exhibit smaller standard deviations compared with scale scores(4.59%versus 7.93%in the low-energy group,4.01%versus 9.05%in the medium-energy group,and 4.29%versus 10.23%in the high-energy group).This underscores the greater accuracy,objectivity,and reproducibility in assessing treatment responses.The quantitative evaluation of pigment removal holds promise for facilitating faster and more robust assessments in research and development.Additionally,it may enable the optimization of treatments tailored to individual patients,thereby contributing to more effective and personalized dermatological care.展开更多
Pulse-burst 1064-nm picosecond azimuthal polarization beam amplification up to an average power of 16.32 W using side-pumped Nd: YAG amplifiers has been demonstrated. The maximum envelop energy as much as 16.32 mJ, co...Pulse-burst 1064-nm picosecond azimuthal polarization beam amplification up to an average power of 16.32 W using side-pumped Nd: YAG amplifiers has been demonstrated. The maximum envelop energy as much as 16.32 mJ, corresponding to a power amplification factor of 299.5%. A simple criterion was defined to help estimate the amount of depolarization in Nd:YAG amplifier stages. The degree of depolarization of the beam was 7.1% and the beam quality was measured to be M2= 3.69. The reason for the azimuthal polarization depolarization and beam quality degradation were explained theoretically and experimentally during the amplification process.展开更多
Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO：LiNbO 3 crystal...Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO：LiNbO 3 crystals pumped at 1.064 μm.The maximum pulse energy reaches 1.3 mJ at 1.464 μm and 0.47 mJ at 3.894 μm,corresponding to a pumpto-idler photon conversion efficiency of 25%.By seeding the hard-to-measure mid-infrared radiation as the idler in the optical parametric amplification and measuring the amplified and frequency up-converted signal in the near-infrared or even visible region,one can measure very week mid-infrared radiation with ordinary detectors,which are insensitive to mid-infrared radiation,with a very high gain.A maximum gain factor of about 7 脳 10 7 is achieved at the mid-infrared wavelength of 3.374 μm and the corresponding energy detection limit is as low as about 390 aJ per pulse.展开更多
Picosecond pulse radiolysis of neat tetrahydrofuran (THF) shows a fast decay of the solvated electron within 2.5ns.The decay of the solvated electron observed at 790nm is because of spur reaction.A numerical simulatio...Picosecond pulse radiolysis of neat tetrahydrofuran (THF) shows a fast decay of the solvated electron within 2.5ns.The decay of the solvated electron observed at 790nm is because of spur reaction.A numerical simulation using time dependent Smoluchowski equation containing a sink term with a distance dependent reaction rate is used to fit the pulse-probe data and shows that the geminate reaction can proceed at long distance in this low polar solvent.展开更多
We present a cascaded nonlinear spectral broadening scheme for Nd-doped lasers,featuring with long pulse duration and high average power.This scheme is based on two multi-pass cells(MPCs)and one multiple-plate superco...We present a cascaded nonlinear spectral broadening scheme for Nd-doped lasers,featuring with long pulse duration and high average power.This scheme is based on two multi-pass cells(MPCs)and one multiple-plate supercontinuum generation(MPSG),and the numerical investigation is driven by a home-made Nd-doped fiber laser with 12 ps pulse duration,50 kHz repetition rate and 100 W average power.The MPC-based first two stages allow us to broaden the pulse spectrum to 4 nm and 43 nm respectively,and subsequently,the MPSG-based third stage allows us to reach 235 nm spectral bandwidth.This broadened spectrum can support a Fourier-transfer-limited pulse duration of 9.8 fs,which is shorter than three optical cycles.To the best of our knowledge,it is the first time to demonstrate the possibility of few-cycle pulses generation based on the 10 ps level Nd-doped lasers.Such few-cycle and high average power laser sources should be attractive and prospective,benefiting from the characteristics of structure compact,low-cost and flexibility.展开更多
An ultra-fast laser with central wavelength at 1064?nm and 10?ps pulse duration?was used to tightly focus laser radiation?with a microscope objective inside the volume of nucleated Lithium Aluminosilicate (LAS) glass-...An ultra-fast laser with central wavelength at 1064?nm and 10?ps pulse duration?was used to tightly focus laser radiation?with a microscope objective inside the volume of nucleated Lithium Aluminosilicate (LAS) glass-ceramic. The nonlinear absorption?of the LAS glass-ceramic was measured?for different laser parameters and a thermal simulation was performed to determine the temperature field inside the laser-modified area. After laser processing,?the samples were crystallized in a furnace and the effect of the laser-induced modifications on the microstructure was analyzed with SEM. The SEM analysis shows an increase in the length and size of whisker-shaped?β-spodumene crystals in the laser-modified area. By increasing the dimension of these whisker-shaped crystals, the flexural strength of LAS can be improved locally.?First?four-point bending flexural tests were performed to examine the influence on the mechanical properties.展开更多
基金Supported by National Basic Research Program of China(Grant No.2011CB013004)National Natural Science Foundation of China(Grant No.51005130)Research Fund of State Key Laboratory of Tribology,Tsinghua University(Grant no.SKLT12B06)
文摘Precision drilling with picosecond laser has been advocated to significantly improve the quality of micro-holes with reduced recast layer thickness and almost no heat affected zone.However,a detailed comparison between nanosecond and picosecond laser drilling techniques has rarely been reported in previous research.In the present study,a series of micro-holes are manufactured on stainless steel 304 using a nanosecond and a picosecond laser drilling system,respectively.The quality of the micro-holes,e.g.,recast layer,micro-crack,circularity,and conicity,etc,is evaluated by employing an optical microscope,an optical interferometer,and a scanning electron microscope.Additionally,the micro-structure of the samples between the edges of the micro-holes and the parent material is compared following etching treatment.The researching results show that a great amount of spattering material accumulated at the entrance ends of the nanosecond laser drilled micro-holes.The formation of a recast layer with a thickness of;5μm is detected on the side walls,associated with initiation of micro-cracks.Tapering phenomenon is also observed and the circularity of the micro-holes is rather poor.With regard to the micro-holes drilled by picosecond laser,the entrance ends,the exit ends,and the side walls are quite smooth without accumulation of spattering material,formation of recast layer and micro-cracks.The circularity of the micro-holes is fairly good without observation of tapering phenomenon.Furthermore,there is no obvious difference as for the micro-structure between the edges of the micro-holes and the parent material.This study proposes a picosecond laser helical drilling technique which can be used for effective manufacturing of high quality micro-holes.
基金Project(52075302)supported by the National Natural Science Foundation of ChinaProject(ZR2021QE247)supported by the Shandong Provincial Natural Science Foundation,China+2 种基金Projects(ZR2018ZB0521,ZR2018ZA0401)supported by the Major Basic Research of Shandong Provincial Natural Science Foundation,ChinaProject(Kfkt2020-09)supported by the Open Research Fund of State Key Laboratory of High Performance Complex Manufacturing,Central South University,ChinaProject(52075302)supported by the Key Laboratory of High-efficiency and Clean Mechanical Manufacture(Shandong University),Ministry of Education,China。
文摘Fog harvesting has been considered as a promising method for solving water crisis in underdeveloped regions.To mimic and optimize the alleged natural fog harvesting ability of the stenocara beetle,hybrid superhydrophobic(hydrophobic,superhydrophilic)/hydrophilic patterns are processed on stainless steel via picosecond laser direct writing.Basically,after laser processing,the surfaces of stainless steel change from hydrophilic to superhydrophilic.Then,after chemical and heat treatment,the superhydrophilic surfaces become superhydrophobic with ultra-low adhesion,and superhydrophobic(hydrophobic)with ultra-high adhesion,respectively.This work systematically examines the fog harvesting ability of picosecond laser treated surfaces(LTS),pristine surfaces(PS),laser and chemical treated surfaces(LCTS),laser and heat-treated surfaces(LHTS).Compared with the PS,the as-prepared surfaces enhanced the fog harvesting efficiency by 50%.This work provides a fast and simple method to fog collectors,which offer a great opportunity to develop water harvesters for real world applications.
基金Funded by National Natural Science Foundation of China(Nos.51332004,51302220,51472201)the Major National Scientific Instrument and Equipment Development Project(No.2011YQ12007504)+1 种基金Natural Science Foundation of Shaanxi Province(No.2014JQ6197)the Foundation Research of Northwestern Polytechnical University(No.JC20120204)
文摘Silicon infiltrated silicon carbide （Si-SiC） ceramics, as high hardness materials, are difficult to machine, especially drilling micro-holes. In this study, the interaction of picosecond laser pulses （1 ps at 1 030 nm） with Si-SiC ceramics was investigated. Variations of the diameter and depth of circular holes with the growth of the laser energy density were obtained. The results indicate that the increase of machining depth follows a nonlinear relation with the increasing of laser energy density, while the diameter has little change with that. Moreover, it is found that some debris and particles are deposited around and inside the holes and waviness is in the entrance and at walls of the holes after laser processing.
基金supported by the National Natural Science Foundation of China(Grant Nos.52071222 and 52471180)Guangdong Major Project of Basic and Applied Basic Research,China(Grant No.2019B030302010)+2 种基金Guangdong Basic and Applied Basic Research,China(Grant No.2020B1515130007)the National Key Research and Development Program of China(Grant No.2021YFA0716302)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB30000000).
文摘The alteration in surface color of metallic glasses(MGs)holds great significance in the context of microstructuredesign and commercial utility.It is essential to accurately describe the structures that are formed during the laser and colorseparation processes in order to develop practical laser coloring applications.Due to the high oxidation sensitivity of Labasedmetallic glass,it can broaden the color range but make it more complex.Structure coloring by laser processing on thesurface of La-based metallic glass can be conducted after thermoplastic forming.It is particularly important to clarify therole of structure and composition in the surface coloring process.The aim is to study the relationship between amorphoussurface structural color,surface geometry,and oxide formation by laser processing in metallic glasses.The findings revealedthat the periodic structure primarily determines the surface color at laser energy densities below 1.0 J/mm^(2).In contrast,thesurface color predominantly depends on the proportion of oxides that are formed when energy densities exceed 1.0 J/mm^(2).Consequently,this study provides a novel concept for the fundamental investigation of laser coloring and establishes a newavenue for practical application.
基金the Agency for Science Technology and Research (A*STAR) of Singapore for financial support
文摘In this investigation,a picosecond laser was employed to fabricate surface textures on a Stavax steel substrate,which is a key material for mold fabrication in the manufacturing of various polymer products.Three main types of surface textures were fabricated on a Stavax steel substrate:periodic ripples,a two-scale hierarchical two-dimensional array of micro-bumps,and a micro-pits array with nanoripples.The wettability of the laser-textured Stavax steel surface was converted from its original hydrophilicity into hydrophobicity and even super-hydrophobicity after exposure to air.The results clearly show that this super-hydrophobicity is mainly due to the surface textures.The ultrafast laserinduced catalytic effect may play a secondary role in modifying the surface chemistry so as to lower the surface energy.The laser-induced surface textures on the metal mold substrates were then replicated onto polypropylene substrates via the polymer injection molding process.The surface wettability of the molded polypropylene was found to be changed from the original hydrophilicity to superhydrophobicity.This developed process holds the potential to improve the performance of fabricated plastic products in terms of wettability control and easy cleaning.
基金supported by the National Key R&D Program of China(2018YFE0115900)the Key Foreign Cooperation Projects of Bureau of International Cooperation of Chinese Academy of Sciences(181231KYSB20210001).
文摘Multilayer dielectric gratings typically remove multiple-grating pillars after picosecond laser irradiation;however,the dynamic formation process of the removal is still unclear.In this study,the damage morphologies of multilayer dielectric gratings induced by an 8.6-ps laser pulse were closely examined.The damage included the removal of a single grating pillar and consecutive adjacent grating pillars and did not involve the destruction of the internal high-reflection mirror structure.Comparative analysis of the two damage morphological characteristics indicated the removal of adjacent pillars was related to an impact process caused by the eruption of localized materials from the left-hand pillar,exerting impact pressure on its adjacent pillars and eventually resulting in multiple pillar removal.A finite-element strain model was used to calculate the stress distribution of the grating after impact.According to the electric field distribution,the eruptive pressure of the dielectric materials after ionization was also simulated.The results suggest that the eruptive pressure resulted in a stress concentration at the root of the adjacent pillar that was sufficient to cause damage,corresponding to the experimental removal of the adjacent pillar from the root.This study provides further understanding of the laser-induced damage behavior of grating pillars and some insights into reducing the undesirable damage process for practical applications.
基金Project(51975017) supported by the National Natural Science Foundation of ChinaProject(KZ202110005012) supported by the Scientific Research Project of Beijing Educational Committee+1 种基金ChinaProject(2018YFB1107500) supported by the National Key R&D Program of China。
文摘The influence of the picosecond(ps) pulsed burst with a nanosecond scale of temporal separation(50 ns) on filamentary traces in sapphire substrate is investigated. The spatiotemporal evolution of the filamentary plasma string induced by sub-pulses of the burst-mode is revealed according to the analysis of the instantaneous photoluminescence images. Due to the presence of residual plasma, the energy loss of sub-pulse during the balancing of self-focusing effect is reduced, and thus refreshes the plasma via refocusing. The refreshed plasma peak generated by the subsequent subpulse appears at relatively low density positions in the formed filamentary plasma string, which results in more uniform densities and less spatial overlap among the plasma peaks. The continuity and uniformity of the filamentary trace in sapphire are enhanced by the burst-mode. Besides, the burst filamentary propagation can also remain effective when the sub-pulse energy is below the self-focusing threshold. Based on this uniform and precise energy propagation mode, the feasibility of its use for the laser lift-off(LLO) process is verified.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 61178024 and 11374316)partially supported by the National Basic Research Program of China (Grant No.2011CB808103)
文摘We report on the modification of the wettability of stainless steel by picosecond laser surface microstructuring in this paper. Compared with traditional methods, picosecond laser-induced surface modification provides a fast and facile method for surface modification without chemical damage and environmental pollution. As a result of treatment by 100 ps laser pulses, microstructures are fabricated on the stainless steel sample surface, contributing to the increase of the contact angle from 88° to 105°, which realizes a transformation from hydrophilicity to hydrophobicity. The morphological features of fabricated microstructures are characterized by scanning electron microscopy and optical microscopy.
基金the National Key R&D Program of China(No.2016YFA0401100)National Natural Science Foundation of China(Nos.12175154,11875092,and 12005149)+1 种基金the Natural Science Foundation of Top Talent of SZTU(Nos.2019010801001 and 2019020801001)The EPOCH code is used under UK EPSRC contract(EP/G055165/1 and EP/G056803/1).
文摘As an intense picosecond laser pulse irradiates a hydrocarbon target,the protons therein can be accelerated by the radiation pressure as well as the sheath field behind the target.We investigate the effect of the laser and hydrocarbon target parameters on proton acceleration with two/threedimensional particle-in-cell simulations.It is found that the resulting two-ion species plasma can generate a multiple peaked charge-separation field that accelerates the protons.In particular,a smaller carbon-to-hydrogen ratio,as well as the thinner and/or lower density of the target,leads to a larger sheath field and thus proton beams with a larger cutoff energy and smoother energy spectrum.These results may be useful in achieving high-flux quasi-monoenergetic proton beams by properly designing the hydrocarbon target.
基金supported by The Shanghai Science and Technology Commission(21S31902700)。
文摘A growing number of skin laser treatments have rapidly evolved and increased their role in the field of dermatology,laser treatment is considered to be used for a variety of pigmentary dermatosis as well as aesthetic problems.The standardized assessment of laser treatment efficacy is crucial for the interpretation and comparison of studies related to laser treatment of skin disorders.In this study,we propose an evaluation method to quantitatively assess laser treatment efficacy based on the image segmentation technology.A tattoo model of Sprague Dawley(SD)rats was established and treated by picosecond laser treatments at varying energy levels.Images of the tattoo models were captured before and after laser treatment,and feature extraction was conducted to quantify the tattooed area and pigment gradation.Subsequently,the clearance rate,which has been a standardized parameter,was calculated.The results indicate that the clearance rates obtained through this quantitative algorithm are comparable and exhibit smaller standard deviations compared with scale scores(4.59%versus 7.93%in the low-energy group,4.01%versus 9.05%in the medium-energy group,and 4.29%versus 10.23%in the high-energy group).This underscores the greater accuracy,objectivity,and reproducibility in assessing treatment responses.The quantitative evaluation of pigment removal holds promise for facilitating faster and more robust assessments in research and development.Additionally,it may enable the optimization of treatments tailored to individual patients,thereby contributing to more effective and personalized dermatological care.
基金Project supported by the National Natural Science Foundation of China(Grant No.U1631240)the Education Commission Program of BeijingBeijing Natural Science Foundation(Grant No.KZ201510005001)
文摘Pulse-burst 1064-nm picosecond azimuthal polarization beam amplification up to an average power of 16.32 W using side-pumped Nd: YAG amplifiers has been demonstrated. The maximum envelop energy as much as 16.32 mJ, corresponding to a power amplification factor of 299.5%. A simple criterion was defined to help estimate the amount of depolarization in Nd:YAG amplifier stages. The degree of depolarization of the beam was 7.1% and the beam quality was measured to be M2= 3.69. The reason for the azimuthal polarization depolarization and beam quality degradation were explained theoretically and experimentally during the amplification process.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61078005)the National Basic ResearchProgram of China (Grant No. 2007CB613205)the China Postdoctoral Science Foundation
文摘Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO：LiNbO 3 crystals pumped at 1.064 μm.The maximum pulse energy reaches 1.3 mJ at 1.464 μm and 0.47 mJ at 3.894 μm,corresponding to a pumpto-idler photon conversion efficiency of 25%.By seeding the hard-to-measure mid-infrared radiation as the idler in the optical parametric amplification and measuring the amplified and frequency up-converted signal in the near-infrared or even visible region,one can measure very week mid-infrared radiation with ordinary detectors,which are insensitive to mid-infrared radiation,with a very high gain.A maximum gain factor of about 7 脳 10 7 is achieved at the mid-infrared wavelength of 3.374 μm and the corresponding energy detection limit is as low as about 390 aJ per pulse.
文摘Picosecond pulse radiolysis of neat tetrahydrofuran (THF) shows a fast decay of the solvated electron within 2.5ns.The decay of the solvated electron observed at 790nm is because of spur reaction.A numerical simulation using time dependent Smoluchowski equation containing a sink term with a distance dependent reaction rate is used to fit the pulse-probe data and shows that the geminate reaction can proceed at long distance in this low polar solvent.
基金Project supported by the National Natural Science Foundation of China(Grant No.61925507)the National Key R&D Program of China(Grant No.2017YFE0123700)+5 种基金the Strategic Priority Research Program of Chinese Academic Sciences(Grant No.XDB1603)the Shanghai Municipal Science and Technology Major Project(Grant No.2017SHZDZX02)the Shanghai Natural ScienceFoundation(Grant No.20ZR1464600)the Program of Shanghai Academic/Technology Research Leader(Grant No.18XD1404200)the Shanghai Sailing Program(Grant No.21YF1453800)Youth Innovation Promotion Association of Chinese Academic Sciences(Grant No.Y202059).
文摘We present a cascaded nonlinear spectral broadening scheme for Nd-doped lasers,featuring with long pulse duration and high average power.This scheme is based on two multi-pass cells(MPCs)and one multiple-plate supercontinuum generation(MPSG),and the numerical investigation is driven by a home-made Nd-doped fiber laser with 12 ps pulse duration,50 kHz repetition rate and 100 W average power.The MPC-based first two stages allow us to broaden the pulse spectrum to 4 nm and 43 nm respectively,and subsequently,the MPSG-based third stage allows us to reach 235 nm spectral bandwidth.This broadened spectrum can support a Fourier-transfer-limited pulse duration of 9.8 fs,which is shorter than three optical cycles.To the best of our knowledge,it is the first time to demonstrate the possibility of few-cycle pulses generation based on the 10 ps level Nd-doped lasers.Such few-cycle and high average power laser sources should be attractive and prospective,benefiting from the characteristics of structure compact,low-cost and flexibility.
文摘An ultra-fast laser with central wavelength at 1064?nm and 10?ps pulse duration?was used to tightly focus laser radiation?with a microscope objective inside the volume of nucleated Lithium Aluminosilicate (LAS) glass-ceramic. The nonlinear absorption?of the LAS glass-ceramic was measured?for different laser parameters and a thermal simulation was performed to determine the temperature field inside the laser-modified area. After laser processing,?the samples were crystallized in a furnace and the effect of the laser-induced modifications on the microstructure was analyzed with SEM. The SEM analysis shows an increase in the length and size of whisker-shaped?β-spodumene crystals in the laser-modified area. By increasing the dimension of these whisker-shaped crystals, the flexural strength of LAS can be improved locally.?First?four-point bending flexural tests were performed to examine the influence on the mechanical properties.
