Zinc oxide(ZnO),as a broadband gap semiconductor material,exhibits unique physical and chemical properties that make it highly suitable for optoelectronics,piezoelectric devices,and gas-sensitive sensors,showing signi...Zinc oxide(ZnO),as a broadband gap semiconductor material,exhibits unique physical and chemical properties that make it highly suitable for optoelectronics,piezoelectric devices,and gas-sensitive sensors,showing significant potential for various applications.This paper focuses on the regulation and application of ZnO-based p-n junctions and piezoelectric devices.It discusses in detail the preparation of ZnO materials,the construction of p-n junctions,the optimization of piezoelectric device performance,and its application in various fields.By employing different preparation methods and strategies,high-quality ZnO thin films can be grown,and effective control of p-type conductivity achieved.This study provides both a theoretical foundation and technical support for controlling the performance of ZnO-based piezoelectric devices,as well as paving new pathways for the broader application of ZnO materials.展开更多
Detumbling operation toward a rotating target with nutation is meaningful for debris removal but challenging. In this study, a deformable end-effector is first designed based on the requirements for contacting the nut...Detumbling operation toward a rotating target with nutation is meaningful for debris removal but challenging. In this study, a deformable end-effector is first designed based on the requirements for contacting the nutating target. A dual-arm robotic system installed with the deformable end-effectors is modeled and the movement of the end-tips is analyzed. The complex operation of the contact toward a nutating target places strict requirements on control accuracy and controller robustness. Thus, an improvement of the tracking error transformation is proposed and an adaptive sliding mode controller with prescribed performance is designed to guarantee the fast and precise motion of the effector during the contact detumbling.Finally, by employing the proposed effector and the controller,numerical simulations are carried out to verify the effectiveness and efficiency of the contact detumbling toward a nutating target.展开更多
This paper introduces a fault-tolerant control(FTC)design for a faulty fixed-wing unmanned aerial vehicle(UAV).To constrain tracking errors against actuator faults,error constraint inequalities are first transformed t...This paper introduces a fault-tolerant control(FTC)design for a faulty fixed-wing unmanned aerial vehicle(UAV).To constrain tracking errors against actuator faults,error constraint inequalities are first transformed to a new set of variables based on prescribed performance functions.Then,the commonly used and powerful proportional-integral-derivative(PID)control concept is employed to filter the transformed error variables.To handle the fault-induced nonlinear terms,a composite learning algorithm consisting of neural network and disturbance observer is incorporated for increasing flight safety.It is shown by Lyapunov stability analysis that the tracking errors are strictly constrained within the specified error bounds.Experimental results are presented to verify the feasibility of the developed FTC scheme.展开更多
Research on compact manufacturing technology for shape and performance controllability of metallic components can reanze the simplification and high-reliability of manufacturing process on the premise of satisfying th...Research on compact manufacturing technology for shape and performance controllability of metallic components can reanze the simplification and high-reliability of manufacturing process on the premise of satisfying the requirement of macro/micro-structure. It is not only the key paths in improving performance, saving material and energy, and green manufacturing of components used in major equipments, but also the challenging subjects in frontiers of advanced plastic forming. To provide a novel horizon for the manufacturing in the critical components is significant. Focused on the high-performance large-scale components such as bearing rings, flanges, railway wheels, thick-walled pipes, etc, the conventional processes and their developing situations are summarized. The existing problems including multi-pass heating, wasting material and energy, high cost and high-emission are discussed, and the present study unable to meet the manufacturing in high-quality components is also pointed out. Thus, the new techniques related to casting-rolling compound precise forming of rings, compact manufacturing for duplex-metal composite rings, compact manufacturing for railway wheels, and casting-extruding continuous forming of thick-walled pipes are introduced in detail, respectively. The corresponding research contents, such as casting ring blank, hot ring rolling, near solid-state pressure forming, hot extruding, are elaborated. Some findings in through-thickness microstructure evolution and mechanical properties are also presented. The components produced by the new techniques are mainly characterized by fine and homogeneous grains. Moreover, the possible directions for fin＇ther development of those techniques are suggested. Finally, the key scientific problems are first proposed. All of these results and conclusions have reference value and guiding significance for the integrated control of shape and performance in advanced compact manufacturing.展开更多
Polynomial-time randomized algorithms were constructed to approximately solve optimal robust performance controller design problems in probabilistic sense and the rigorous mathematical justification of the approach wa...Polynomial-time randomized algorithms were constructed to approximately solve optimal robust performance controller design problems in probabilistic sense and the rigorous mathematical justification of the approach was given. The randomized algorithms here were based on a property from statistical learning theory known as (uniform) convergence of empirical means (UCEM). It is argued that in order to assess the performance of a controller as the plant varies over a pre-specified family, it is better to use the average performance of the controller as the objective function to be optimized, rather than its worst-case performance. The approach is illustrated to be efficient through an example.展开更多
The problems of identification and stabilization of a class of Hammerstein systems over a wireless network are investigated in this paper. A new approach for the proof of iterative identification is presented first. T...The problems of identification and stabilization of a class of Hammerstein systems over a wireless network are investigated in this paper. A new approach for the proof of iterative identification is presented first. Then a guaranteed performance controller is designed to stabilize the system. The effectiveness of the proposed approach is demonstrated by numerical examples.展开更多
This article investigates the approaching control for fixed-wing Unmanned Aerial Vehi-cle(UAV)aerial recovery in the presence of pre-specified performance requirements,complex air-flows,maneuvering flight of transport...This article investigates the approaching control for fixed-wing Unmanned Aerial Vehi-cle(UAV)aerial recovery in the presence of pre-specified performance requirements,complex air-flows,maneuvering flight of transport aircraft,and different initial deviations.First,a novelcontrol-oriented Six-Degree-Of-Freedom(6-DOF)UAV model considering airflow disturbancesis established for better consistency with the actual UAV system.Then,to achieve satisfactory per-formance in the approaching process,a Flexible Appointed-time Prescribed Performance Control(FAPPC)algorithm,with the features of user-specified time convergence,no overshoot,indepen-dence from the initial value,and singularity-free,is proposed.Specifically,to solve the singularityissue encountered by the existing PPC methods in dealing with sudden disturbances,an adaptiveadjustment signal is introduced in FAPPC to perceive the threat of increasing error and relax thepreset boundaries appropriately.Moreover,minimum learning parameter-based neural networkestimators are developed to approximate unknown lumped disturbances at a low computationalcost.Finally,the stability of the closed system is analyzed via Lyapunov synthesis,and the effective-ness and advantages of the proposed control scheme are demonstrated via simulation andHardware-In-the-Loop(HIL)experimental validation.展开更多
In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data be...In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.展开更多
Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are commo...Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are common and particularly problematic with LaCrO_(3) heaters,which can experience significant power fluctuations and even failure due to substantial resistance changes—an issue conventional thyristorcontrolled heating systems cannot effectively manage.To address this limitation,we have developed the Multi-Anvil Stable Temperature controller(MASTer),a high-performance heating system optimized for MAP experiments.MASTer enables precise,high-speed measurement of heating parameters and power output control,incorporating a gentle regulation strategy to enhance stability.It ensures consistent heating across various heater types,including LaCrO_(3),with power fluctuations limited to±0.1 W and temperature fluctuations to within±2℃ in most cases.The design,operating principles,user interface,functionality,and performance of the heating system are discussed in detail.展开更多
This paper studies the problem of time-varying formation control with finite-time prescribed performance for nonstrict feedback second-order multi-agent systems with unmeasured states and unknown nonlinearities.To eli...This paper studies the problem of time-varying formation control with finite-time prescribed performance for nonstrict feedback second-order multi-agent systems with unmeasured states and unknown nonlinearities.To eliminate nonlinearities,neural networks are applied to approximate the inherent dynamics of the system.In addition,due to the limitations of the actual working conditions,each follower agent can only obtain the locally measurable partial state information of the leader agent.To address this problem,a neural network state observer based on the leader state information is designed.Then,a finite-time prescribed performance adaptive output feedback control strategy is proposed by restricting the sliding mode surface to a prescribed region,which ensures that the closed-loop system has practical finite-time stability and that formation errors of the multi-agent systems converge to the prescribed performance bound in finite time.Finally,a numerical simulation is provided to demonstrate the practicality and effectiveness of the developed algorithm.展开更多
A prescribed performance control scheme based on the three-inflection-point hyperbolic function and predefined time performance function is proposed to solve the trajectory tracking problem of the forward-tilting morp...A prescribed performance control scheme based on the three-inflection-point hyperbolic function and predefined time performance function is proposed to solve the trajectory tracking problem of the forward-tilting morphing aerospace vehicle with time-varying actuator faults.To accurately estimate the loss degree of actuator faults,an immersion and invariance observer based on the predefined time dynamic scale factor is designed to estimate and compensate it.A composite dynamic sliding mode surface is designed using a three-inflection-point hyperbolic function,and a novel three-inflection-point sliding mode control framework is proposed.The convergent domain of the sliding manifold is adjusted by parameters,and the system error convergence is controllable.A transfer function is designed to eliminate the sensitivity of the three-inflection-point hyperbolic sliding mode to the unknown initial state,and combined with the barrier Lyapunov function,and the performance constraint of the system is realized.The global asymptotic stability of the system is demonstrated using a strict mathematical proof.The effectiveness and superiority of the proposed control scheme are proven by simulation experiments.展开更多
This paper addresses the tracking control problem of a class of multiple-input–multiple-output nonlinear systems subject to actuator faults.Achieving a balance between input saturation and performance constraints,rat...This paper addresses the tracking control problem of a class of multiple-input–multiple-output nonlinear systems subject to actuator faults.Achieving a balance between input saturation and performance constraints,rather than conducting isolated analyses,especially in the presence of frequently encountered unknown actuator faults,becomes an interesting yet challenging problem.First,to enhance the tracking performance,Tunnel Prescribed Performance(TPP)is proposed to provide narrow tunnel-shape constraints instead of the common over-relaxed trumpet-shape performance constraints.A pair of non-negative signals produced by an auxiliary system is then integrated into TPP,resulting in Saturation-tolerant Prescribed Performance(SPP)with flexible performance boundaries that account for input saturation situations.Namely,SPP can appropriately relax TPP when needed and decrease the conservatism of control design.With the help of SPP,our developed Saturation-tolerant Prescribed Control(SPC)guarantees finite-time convergence while satisfying both input saturation and performance constraints,even under serious actuator faults.Simulations are conducted to illustrate the effectiveness of the proposed SPC.展开更多
In this paper,we consider the practical prescribed-time performance guaranteed tracking control problem for a class of uncertain strict-feedback systems subject to unknown control direction.Due to the existence of unk...In this paper,we consider the practical prescribed-time performance guaranteed tracking control problem for a class of uncertain strict-feedback systems subject to unknown control direction.Due to the existence of unknown nonlinearities and uncertainties,it is challenging to design a controller that can ensure the stability of closed-loop system within a predetermined finite time while maintaining the specified transient performance.The underlying problem becomes further complex as the control directions are unknown.To deal with the above problems,a special translation function as well as Nussbaum type function are introduced in the prescribed performance control(PPC)framework.Finally,a PPC as well as preset finite time tracking control scheme is designed,and its effectiveness is confirmed by both theoretical analysis and numerical simulation.展开更多
An optimal tracking control problem for a class of nonlinear systems with guaranteed performance and asymmetric input constraints is discussed in this paper.The control policy is implemented by adaptive dynamic progra...An optimal tracking control problem for a class of nonlinear systems with guaranteed performance and asymmetric input constraints is discussed in this paper.The control policy is implemented by adaptive dynamic programming(ADP)algorithm under two event-based triggering mechanisms.It is often challenging to design an optimal control law due to the system deviation caused by asymmetric input constraints.First,a prescribed performance control technique is employed to guarantee the tracking errors within predetermined boundaries.Subsequently,considering the asymmetric input constraints,a discounted non-quadratic cost function is introduced.Moreover,in order to reduce controller updates,an event-triggered control law is developed for ADP algorithm.After that,to further simplify the complexity of controller design,this work is extended to a self-triggered case for relaxing the need for continuous signal monitoring by hardware devices.By employing the Lyapunov method,the uniform ultimate boundedness of all signals is proved to be guaranteed.Finally,a simulation example on a mass–spring–damper system subject to asymmetric input constraints is provided to validate the effectiveness of the proposed control scheme.展开更多
This paper is concerned with the control performance assessment based on the multivariable generalized minimum variance benchmark.An explicit expression for the feedback controller-invariant(the generalized minimum va...This paper is concerned with the control performance assessment based on the multivariable generalized minimum variance benchmark.An explicit expression for the feedback controller-invariant(the generalized minimum variance)term of the multivariable control system is obtained,which is used as a standard benchmark for the assessment of the control performance for multi input multi output(MIMO)process.The proposed approach is based on the multivariable minimum variance benchmark.In comparison with the minimum variance benchmark, the developed method is more reasonable and practical for the control performance assessment of multivariable systems.The approach is illustrated by a simulation example and an industrial application.展开更多
Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operat...Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operating point and process constraints, which is related to the margins of design variables. Because of various ciisturbances in chemical processes, some distances must be reserved for fluctuations of process variables and the optimum operating point is not on some process constraints. Thus the benefit of steady-state optimization can not be fully achied（ed while that of dynamic optimization can be really achieved. In this study, the steady-state optimizationand dynamic optimization are used, and the potential benefit-is divided into achievable benefit for profit and unachievable benefit for control. The fluid catalytic cracking unit （FCCU） is used for case study. With the analysis on how the margins of design variables influence the economic benefit and control performance, the bottlenecks of process design are found and appropriate control structure can be selected.展开更多
For a distributed drive electric vehicle（DDEV） driven by four in-wheel motors, advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently, quickly and precisely. A...For a distributed drive electric vehicle（DDEV） driven by four in-wheel motors, advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently, quickly and precisely. And direct yaw-moment control（DYC） has been widely studied and applied to vehicle stability control. Good vehicle handling performance： quick yaw rate transient response, small overshoot, high steady yaw rate gain, etc, is required by drivers under normal conditions, which is less concerned, however. Based on the hierarchical control methodology, a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed. The upper-loop control system consists of two parts： a state feedback controller, which aims to realize the ideal transient response of yaw rate, with a vehicle sideslip angle observer; and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain. Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors, the integrated time and absolute error（ITAE） function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix. Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method： yaw rate rising time is reduced, steady yaw rate gain is increased, vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced. The control system improves vehicle handling performance under normal conditions in both transient and steady response. State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.展开更多
Absorption/desorption properties of some humidity controlling materials which contain gypsum as basic cement materials and activated Sepiolite powder as humidity controlling media were tested. The kinetics curve of mo...Absorption/desorption properties of some humidity controlling materials which contain gypsum as basic cement materials and activated Sepiolite powder as humidity controlling media were tested. The kinetics curve of moisture adsorption/desorption were drawn and humidity controlling performance in nature environment was verified. The experimental results show that moisture absorption/desorption rates are increased, and the speed is also accelerated. These materials, which can adjust environmental humidity effectively, are new ones with good humidity controlling performance.展开更多
Robust LQG problems of discrete-time Markovian jump systems with uncertain noises are investigated. The problem addressed is the construction of perturbation upper bounds on the uncertain noise covariances so as to gu...Robust LQG problems of discrete-time Markovian jump systems with uncertain noises are investigated. The problem addressed is the construction of perturbation upper bounds on the uncertain noise covariances so as to guarantee that the deviation of the control performance remains within the precision prescribed in actual problems. Furthermore, this regulator is capable of minimizing the worst performance in an uncertain case. A numerical example is exploited to show the validity of the method.展开更多
Control performance monitoring has attracted great attention in both academia and industry over the past two decades. However, most research efforts have been devoted to the performance monitoring of linear control sy...Control performance monitoring has attracted great attention in both academia and industry over the past two decades. However, most research efforts have been devoted to the performance monitoring of linear control systems, without considering the pervasive nonlinearities(e.g. valve stiction) present in most industrial control systems. In this work, a novel probability distribution distance based index is proposed to monitor the performance of non-linear control systems. The proposed method uses Hellinger distance to evaluate change of control system performance. Several simulation examples are given to illustrate the effectiveness of the proposed method.展开更多
基金The Natural Science Foundation of Guangdong Province(Project No.2023A1515012352)。
文摘Zinc oxide(ZnO),as a broadband gap semiconductor material,exhibits unique physical and chemical properties that make it highly suitable for optoelectronics,piezoelectric devices,and gas-sensitive sensors,showing significant potential for various applications.This paper focuses on the regulation and application of ZnO-based p-n junctions and piezoelectric devices.It discusses in detail the preparation of ZnO materials,the construction of p-n junctions,the optimization of piezoelectric device performance,and its application in various fields.By employing different preparation methods and strategies,high-quality ZnO thin films can be grown,and effective control of p-type conductivity achieved.This study provides both a theoretical foundation and technical support for controlling the performance of ZnO-based piezoelectric devices,as well as paving new pathways for the broader application of ZnO materials.
基金supported by the National Natural Science Foundation of China(11972077,11672035)。
文摘Detumbling operation toward a rotating target with nutation is meaningful for debris removal but challenging. In this study, a deformable end-effector is first designed based on the requirements for contacting the nutating target. A dual-arm robotic system installed with the deformable end-effectors is modeled and the movement of the end-tips is analyzed. The complex operation of the contact toward a nutating target places strict requirements on control accuracy and controller robustness. Thus, an improvement of the tracking error transformation is proposed and an adaptive sliding mode controller with prescribed performance is designed to guarantee the fast and precise motion of the effector during the contact detumbling.Finally, by employing the proposed effector and the controller,numerical simulations are carried out to verify the effectiveness and efficiency of the contact detumbling toward a nutating target.
基金This work was supported by the National Natural Science Foundation of China(62003162,61833013,62020106003)the Natural Science Foundation of Jiangsu Province of China(BK20200416)+3 种基金the China Postdoctoral Science Foundation(2020TQ0151,2020M681590)the State Key Laboratory of Synthetical Automation for Process Industries,Northeastern University(2019-KF-23-05)the 111 Project(B20007)the Natural Sciences and Engineering Research Council of Canada.
文摘This paper introduces a fault-tolerant control(FTC)design for a faulty fixed-wing unmanned aerial vehicle(UAV).To constrain tracking errors against actuator faults,error constraint inequalities are first transformed to a new set of variables based on prescribed performance functions.Then,the commonly used and powerful proportional-integral-derivative(PID)control concept is employed to filter the transformed error variables.To handle the fault-induced nonlinear terms,a composite learning algorithm consisting of neural network and disturbance observer is incorporated for increasing flight safety.It is shown by Lyapunov stability analysis that the tracking errors are strictly constrained within the specified error bounds.Experimental results are presented to verify the feasibility of the developed FTC scheme.
基金Supported by National Natural Science Foundation of China(Grant Nos.51675361,51575371)Key Program of National Natural Science Foundation of China(Grant No.51135007)Key Research Project of Shanxi Province(Grant No.03012015004)
文摘Research on compact manufacturing technology for shape and performance controllability of metallic components can reanze the simplification and high-reliability of manufacturing process on the premise of satisfying the requirement of macro/micro-structure. It is not only the key paths in improving performance, saving material and energy, and green manufacturing of components used in major equipments, but also the challenging subjects in frontiers of advanced plastic forming. To provide a novel horizon for the manufacturing in the critical components is significant. Focused on the high-performance large-scale components such as bearing rings, flanges, railway wheels, thick-walled pipes, etc, the conventional processes and their developing situations are summarized. The existing problems including multi-pass heating, wasting material and energy, high cost and high-emission are discussed, and the present study unable to meet the manufacturing in high-quality components is also pointed out. Thus, the new techniques related to casting-rolling compound precise forming of rings, compact manufacturing for duplex-metal composite rings, compact manufacturing for railway wheels, and casting-extruding continuous forming of thick-walled pipes are introduced in detail, respectively. The corresponding research contents, such as casting ring blank, hot ring rolling, near solid-state pressure forming, hot extruding, are elaborated. Some findings in through-thickness microstructure evolution and mechanical properties are also presented. The components produced by the new techniques are mainly characterized by fine and homogeneous grains. Moreover, the possible directions for fin＇ther development of those techniques are suggested. Finally, the key scientific problems are first proposed. All of these results and conclusions have reference value and guiding significance for the integrated control of shape and performance in advanced compact manufacturing.
文摘Polynomial-time randomized algorithms were constructed to approximately solve optimal robust performance controller design problems in probabilistic sense and the rigorous mathematical justification of the approach was given. The randomized algorithms here were based on a property from statistical learning theory known as (uniform) convergence of empirical means (UCEM). It is argued that in order to assess the performance of a controller as the plant varies over a pre-specified family, it is better to use the average performance of the controller as the objective function to be optimized, rather than its worst-case performance. The approach is illustrated to be efficient through an example.
基金supported by Shanghai Engineering Research Center of Green Energy Grid-Connected Technology Center(No.13DZ2251900)Shanghai Natural Science Foundation(No.15ZR1417500)+1 种基金Young Teacher Training Program and Industry-Study-Research Cooperation Project from Shanghai Education Commission(Nos.ZZsdl13008 and CXYsdl14012)Science and Technology Commission of Shanghai Municipality(No.11jc1404000)
文摘The problems of identification and stabilization of a class of Hammerstein systems over a wireless network are investigated in this paper. A new approach for the proof of iterative identification is presented first. Then a guaranteed performance controller is designed to stabilize the system. The effectiveness of the proposed approach is demonstrated by numerical examples.
基金funded by the National Natural Science Foundation of China(Nos.62173022,61673042)the Academic Excellence Foundation of Beihang University for Ph.D.Studentsthe Outstanding Research Project of Shen Yuan Honors College,Beihang University,China(No.230123104)。
文摘This article investigates the approaching control for fixed-wing Unmanned Aerial Vehi-cle(UAV)aerial recovery in the presence of pre-specified performance requirements,complex air-flows,maneuvering flight of transport aircraft,and different initial deviations.First,a novelcontrol-oriented Six-Degree-Of-Freedom(6-DOF)UAV model considering airflow disturbancesis established for better consistency with the actual UAV system.Then,to achieve satisfactory per-formance in the approaching process,a Flexible Appointed-time Prescribed Performance Control(FAPPC)algorithm,with the features of user-specified time convergence,no overshoot,indepen-dence from the initial value,and singularity-free,is proposed.Specifically,to solve the singularityissue encountered by the existing PPC methods in dealing with sudden disturbances,an adaptiveadjustment signal is introduced in FAPPC to perceive the threat of increasing error and relax thepreset boundaries appropriately.Moreover,minimum learning parameter-based neural networkestimators are developed to approximate unknown lumped disturbances at a low computationalcost.Finally,the stability of the closed system is analyzed via Lyapunov synthesis,and the effective-ness and advantages of the proposed control scheme are demonstrated via simulation andHardware-In-the-Loop(HIL)experimental validation.
基金supported in part by the National Natural Science Foundation of China(62125306)Zhejiang Key Research and Development Project(2024C01163)the State Key Laboratory of Industrial Control Technology,China(ICT2024A06)
文摘In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.
基金supported by the National Science Fund for Distinguished Young Scholars(Grant No.T2225027)the National Key R&D Program of China(Grant No.2023YFA1608902).
文摘Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are common and particularly problematic with LaCrO_(3) heaters,which can experience significant power fluctuations and even failure due to substantial resistance changes—an issue conventional thyristorcontrolled heating systems cannot effectively manage.To address this limitation,we have developed the Multi-Anvil Stable Temperature controller(MASTer),a high-performance heating system optimized for MAP experiments.MASTer enables precise,high-speed measurement of heating parameters and power output control,incorporating a gentle regulation strategy to enhance stability.It ensures consistent heating across various heater types,including LaCrO_(3),with power fluctuations limited to±0.1 W and temperature fluctuations to within±2℃ in most cases.The design,operating principles,user interface,functionality,and performance of the heating system are discussed in detail.
基金the National Natural Science Foundation of China(62203356)Fundamental Research Funds for the Central Universities of China(31020210502002)。
文摘This paper studies the problem of time-varying formation control with finite-time prescribed performance for nonstrict feedback second-order multi-agent systems with unmeasured states and unknown nonlinearities.To eliminate nonlinearities,neural networks are applied to approximate the inherent dynamics of the system.In addition,due to the limitations of the actual working conditions,each follower agent can only obtain the locally measurable partial state information of the leader agent.To address this problem,a neural network state observer based on the leader state information is designed.Then,a finite-time prescribed performance adaptive output feedback control strategy is proposed by restricting the sliding mode surface to a prescribed region,which ensures that the closed-loop system has practical finite-time stability and that formation errors of the multi-agent systems converge to the prescribed performance bound in finite time.Finally,a numerical simulation is provided to demonstrate the practicality and effectiveness of the developed algorithm.
基金co-supported by the Xinjiang Uygur Autonomous Region Natural Science Foundation,China(No.2022D01C86)the National Natural Science Foundation of China(No.62263030)the Open Research Fund Program of Beijing National Research Center for Information Science and Technology,China(No.BR2023KF02011).
文摘A prescribed performance control scheme based on the three-inflection-point hyperbolic function and predefined time performance function is proposed to solve the trajectory tracking problem of the forward-tilting morphing aerospace vehicle with time-varying actuator faults.To accurately estimate the loss degree of actuator faults,an immersion and invariance observer based on the predefined time dynamic scale factor is designed to estimate and compensate it.A composite dynamic sliding mode surface is designed using a three-inflection-point hyperbolic function,and a novel three-inflection-point sliding mode control framework is proposed.The convergent domain of the sliding manifold is adjusted by parameters,and the system error convergence is controllable.A transfer function is designed to eliminate the sensitivity of the three-inflection-point hyperbolic sliding mode to the unknown initial state,and combined with the barrier Lyapunov function,and the performance constraint of the system is realized.The global asymptotic stability of the system is demonstrated using a strict mathematical proof.The effectiveness and superiority of the proposed control scheme are proven by simulation experiments.
基金supported by the National Research Foundation Singapore under its AI Singapore Programme(Award Number:[AISG2-GC-2023-007]).
文摘This paper addresses the tracking control problem of a class of multiple-input–multiple-output nonlinear systems subject to actuator faults.Achieving a balance between input saturation and performance constraints,rather than conducting isolated analyses,especially in the presence of frequently encountered unknown actuator faults,becomes an interesting yet challenging problem.First,to enhance the tracking performance,Tunnel Prescribed Performance(TPP)is proposed to provide narrow tunnel-shape constraints instead of the common over-relaxed trumpet-shape performance constraints.A pair of non-negative signals produced by an auxiliary system is then integrated into TPP,resulting in Saturation-tolerant Prescribed Performance(SPP)with flexible performance boundaries that account for input saturation situations.Namely,SPP can appropriately relax TPP when needed and decrease the conservatism of control design.With the help of SPP,our developed Saturation-tolerant Prescribed Control(SPC)guarantees finite-time convergence while satisfying both input saturation and performance constraints,even under serious actuator faults.Simulations are conducted to illustrate the effectiveness of the proposed SPC.
基金supported in part by the National Key Research and Development Program of China under grant(No.2022YFB4701400/4701401)by the National Natural Science Foundation of China under grant(No.61991400,No.61991403,No.62250710167,No.61860206008,No.61933012,No.62273064,No.62203078)+2 种基金in part by the National Key Research and Development Program of China under grant(No.2021ZD0201300)in part by the Innovation Support Program for International Students Returning to China under grant(No.cx2022016)in part by the Chongqing Medical Scientific Research Project under grant(No.2022DBXM001).
文摘In this paper,we consider the practical prescribed-time performance guaranteed tracking control problem for a class of uncertain strict-feedback systems subject to unknown control direction.Due to the existence of unknown nonlinearities and uncertainties,it is challenging to design a controller that can ensure the stability of closed-loop system within a predetermined finite time while maintaining the specified transient performance.The underlying problem becomes further complex as the control directions are unknown.To deal with the above problems,a special translation function as well as Nussbaum type function are introduced in the prescribed performance control(PPC)framework.Finally,a PPC as well as preset finite time tracking control scheme is designed,and its effectiveness is confirmed by both theoretical analysis and numerical simulation.
基金supported in part by the National Natural Science Foundation of China(62033003,62003093,62373113,U23A20341,U21A20522)the Natural Science Foundation of Guangdong Province,China(2023A1515011527,2022A1515011506).
文摘An optimal tracking control problem for a class of nonlinear systems with guaranteed performance and asymmetric input constraints is discussed in this paper.The control policy is implemented by adaptive dynamic programming(ADP)algorithm under two event-based triggering mechanisms.It is often challenging to design an optimal control law due to the system deviation caused by asymmetric input constraints.First,a prescribed performance control technique is employed to guarantee the tracking errors within predetermined boundaries.Subsequently,considering the asymmetric input constraints,a discounted non-quadratic cost function is introduced.Moreover,in order to reduce controller updates,an event-triggered control law is developed for ADP algorithm.After that,to further simplify the complexity of controller design,this work is extended to a self-triggered case for relaxing the need for continuous signal monitoring by hardware devices.By employing the Lyapunov method,the uniform ultimate boundedness of all signals is proved to be guaranteed.Finally,a simulation example on a mass–spring–damper system subject to asymmetric input constraints is provided to validate the effectiveness of the proposed control scheme.
基金Supported by the National High Technology Research and Development Program of China(2008AA042902)the National Basic Research Program of China(2007CB714006)the Graduate Creative Research Program of Zhejiang Province (YK2008024)
文摘This paper is concerned with the control performance assessment based on the multivariable generalized minimum variance benchmark.An explicit expression for the feedback controller-invariant(the generalized minimum variance)term of the multivariable control system is obtained,which is used as a standard benchmark for the assessment of the control performance for multi input multi output(MIMO)process.The proposed approach is based on the multivariable minimum variance benchmark.In comparison with the minimum variance benchmark, the developed method is more reasonable and practical for the control performance assessment of multivariable systems.The approach is illustrated by a simulation example and an industrial application.
基金Supported by the National Natural Science Foundation of China(21006127)the National Basic Research Program of China(2012CB720500)the Science Foundation of China University of Petroleum(KYJJ2012-05-28)
文摘Operation optimization is an effective method to explore potential economic benefits for existing plants. The m.aximum potential benefit from operationoptimization is determined by the distances between current operating point and process constraints, which is related to the margins of design variables. Because of various ciisturbances in chemical processes, some distances must be reserved for fluctuations of process variables and the optimum operating point is not on some process constraints. Thus the benefit of steady-state optimization can not be fully achied（ed while that of dynamic optimization can be really achieved. In this study, the steady-state optimizationand dynamic optimization are used, and the potential benefit-is divided into achievable benefit for profit and unachievable benefit for control. The fluid catalytic cracking unit （FCCU） is used for case study. With the analysis on how the margins of design variables influence the economic benefit and control performance, the bottlenecks of process design are found and appropriate control structure can be selected.
基金Supported by National Basic Research Program of China(973 Program,Grant No.2011CB711200)National Science and Technology Support Program of China(Grant No.2015BAG17B00)National Natural Science Foundation of China(Grant No.51475333)
文摘For a distributed drive electric vehicle（DDEV） driven by four in-wheel motors, advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently, quickly and precisely. And direct yaw-moment control（DYC） has been widely studied and applied to vehicle stability control. Good vehicle handling performance： quick yaw rate transient response, small overshoot, high steady yaw rate gain, etc, is required by drivers under normal conditions, which is less concerned, however. Based on the hierarchical control methodology, a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed. The upper-loop control system consists of two parts： a state feedback controller, which aims to realize the ideal transient response of yaw rate, with a vehicle sideslip angle observer; and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain. Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors, the integrated time and absolute error（ITAE） function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix. Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method： yaw rate rising time is reduced, steady yaw rate gain is increased, vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced. The control system improves vehicle handling performance under normal conditions in both transient and steady response. State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.
文摘Absorption/desorption properties of some humidity controlling materials which contain gypsum as basic cement materials and activated Sepiolite powder as humidity controlling media were tested. The kinetics curve of moisture adsorption/desorption were drawn and humidity controlling performance in nature environment was verified. The experimental results show that moisture absorption/desorption rates are increased, and the speed is also accelerated. These materials, which can adjust environmental humidity effectively, are new ones with good humidity controlling performance.
文摘Robust LQG problems of discrete-time Markovian jump systems with uncertain noises are investigated. The problem addressed is the construction of perturbation upper bounds on the uncertain noise covariances so as to guarantee that the deviation of the control performance remains within the precision prescribed in actual problems. Furthermore, this regulator is capable of minimizing the worst performance in an uncertain case. A numerical example is exploited to show the validity of the method.
基金Supported by the National Natural Science Foundation of China(61134007,61203157)the National Science Fund for Outstanding Young Scholars(61222303)+1 种基金the Fundamental Research Funds for the Central Universities(22A20151405)Shanghai R&D Platform Construction Program(13DZ2295300)
文摘Control performance monitoring has attracted great attention in both academia and industry over the past two decades. However, most research efforts have been devoted to the performance monitoring of linear control systems, without considering the pervasive nonlinearities(e.g. valve stiction) present in most industrial control systems. In this work, a novel probability distribution distance based index is proposed to monitor the performance of non-linear control systems. The proposed method uses Hellinger distance to evaluate change of control system performance. Several simulation examples are given to illustrate the effectiveness of the proposed method.
