The plan view pattern control theoretical models were simplified. Under the condition of constant volume for the plan view pattern compensation, the relation between the thickness and the length can be simplified to t...The plan view pattern control theoretical models were simplified. Under the condition of constant volume for the plan view pattern compensation, the relation between the thickness and the length can be simplified to the linearity in the segment for the plan view pattern control function. The compensation volume can be dispersed for easy calculation. By comparing the model calculation result with the actual result, it was concluded that the simplified model can be used for the online control process.展开更多
Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation f...Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.展开更多
The forward slip model with adhesion was used to derive the formula of calculating taper rolling time. The relation between the rolling time and the taper length and the relation between the rolling time and the taper...The forward slip model with adhesion was used to derive the formula of calculating taper rolling time. The relation between the rolling time and the taper length and the relation between the rolling time and the taper thickness can be obtained. The numerical solution for this formula was used on site. According to the simulation result, the roll gap value should be changed linearly with rolling time.展开更多
As a typical rhythmic movement, human being＇s rhythmic gait movement can be generated by a central pattern generator （CPG） located in a spinal cord by self- oscillation. Some kinds of gait movements are caused by g...As a typical rhythmic movement, human being＇s rhythmic gait movement can be generated by a central pattern generator （CPG） located in a spinal cord by self- oscillation. Some kinds of gait movements are caused by gait frequency and amplitude variances. As an important property of human being＇s motion vision, the attention selection mechanism plays a vital part in the regulation of gait movement. In this paper, the CPG model is amended under the condition of attention selection on the theoretical basis of Matsuoka neural oscillators. Regulation of attention selection signal for the CPG model parameters and structure is studied, which consequentially causes the frequency and amplitude changes of gait movement output. Further, the control strategy of the CPG model gait movement under the condition of attention selection is discussed, showing that the attention selection model can regulate the output model of CPG gait movement in three different ways. The realization of regulation on the gait movement frequency and amplitude shows a variety of regulation on the CPG gait movement made by attention selection and enriches the controllability of CPG gait movement, which demonstrates potential influence in engineering applications.展开更多
The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process i...The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns;natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.展开更多
AIM：To assess the relation between nutrient patterns and cataract risk.METHODS：This is a hospital-based case-control study with 97 cataract patients and 198 matched controls.Dietary consumption was collected through...AIM：To assess the relation between nutrient patterns and cataract risk.METHODS：This is a hospital-based case-control study with 97 cataract patients and 198 matched controls.Dietary consumption was collected through a valid food frequency questionnaire（FFQ）.Nutrient patterns were detected by applying factor analysis.Unconditional logistic regression models were used to estimate odds ratio（ORs） and 95%CIs.RESULTS：We extracted 5 main nutrient patterns.Factor 1 included niacin,thiamin,carbohydrates,protein,zinc,vitamin B6 and sodium（sodium pattern）.Factor 2 was characterized by oleic acid,monounsaturated fats,polyunsaturated fats,linoleic acid,trans fatty acid,linolenic acid,vitamin E and saturated fats（fatty acid pattern）.The third factor represented high intake of vitamin B12,vitamin D,cholesterol and calcium（mixed pattern）.The 4^（th） pattern was high in intake of beta and alpha carotene,vitamin A and vitamin C（antioxidant pattern）.Finally,the 5^（th） pattern loaded heavily on docosahexaenoic acid（DHA） and eicosapentaenoic acid（EPA）（omega-3 pattern）.In crude and multivariate analysis,the sodium pattern was associated with increased risk of cataract（OR=1.97,95%CI：1.09-3.96）.The fatty acid pattern elevated the risk of cataract（OR=1.94,95%CI：1.1-3.86）.Antioxidant pattern was associated with a significant 79% reduced risk（2^（nd） category compared with the 1st）.Omega-3 pattern was significantly negatively associated with risk of cataract（P=0.04）.CONCLUSION：These findings imply that nutrient patterns reflecting a combined consumption of nutrients might be important in the etiology of cataract.Additional studies with more efficient designs are warranted to confirm our findings.展开更多
1 Introduction Reservoir architecture analysis of distributary channel of Daqing oilfield has drawn consistent interest among development geologists and petroleum engineers over the last decade(Lv et al.,1999;Zhou et ...1 Introduction Reservoir architecture analysis of distributary channel of Daqing oilfield has drawn consistent interest among development geologists and petroleum engineers over the last decade(Lv et al.,1999;Zhou et al.,2008;Zhang et展开更多
The trajectory of the controlled system in phase space has been investigated, and different learning methods are applied to the single adaptive neuron controller according to the pattem of the control system. The adva...The trajectory of the controlled system in phase space has been investigated, and different learning methods are applied to the single adaptive neuron controller according to the pattem of the control system. The advantage of the controller presented has been shown by simulation of a satellite attitude stability control system.展开更多
The paper covers analysis and investigation of lighting automation system in low-traffic long-roads. The main objective is to provide optimal solution between expensive safe design that utilizes continuous street ligh...The paper covers analysis and investigation of lighting automation system in low-traffic long-roads. The main objective is to provide optimal solution between expensive safe design that utilizes continuous street lighting system at night for the entire road, or inexpensive design that sacrifices the safety, relying on using vehicles lighting, to eliminate the problem of high cost energy consumption during the night operation of the road. By taking into account both of these factors, smart lighting automation system is proposed using Pattern Recognition Technique applied on vehicle number-plates. In this proposal, the road is sectionalized into zones, and based on smart Pattern Recognition Technique, the control system of the road lighting illuminates only the zone that the vehicles pass through. Economic analysis is provided in this paper to support the value of using this design of lighting control system.展开更多
基金Item Sponsored by National Economy Trade Committee Foundation(ZZ0113A040201)
文摘The plan view pattern control theoretical models were simplified. Under the condition of constant volume for the plan view pattern compensation, the relation between the thickness and the length can be simplified to the linearity in the segment for the plan view pattern control function. The compensation volume can be dispersed for easy calculation. By comparing the model calculation result with the actual result, it was concluded that the simplified model can be used for the online control process.
基金Sponsored by the Fundamental Research Funds for the Central Universities(Grant No.N120407007)
文摘Research works on width compensation and correction were carried out in order to eliminate the effects of the PVPC （ plan view pattern control） on width accuracy of plate mill. The thickness correction calculation formula was derived for compensation the width deviation caused by PVPC function, and the formula is unified under the thinning and thickening conditions. In order to improve the width calculation accuracy, width spread calculation process was modified with dividing one large reduction pass to several small reduction calculation steps. The thickness wedge was simplified to rectangle based on the volume constant principle, and the width spread model for PVPC was constructed. The width compensation and correction for the PVPC functions are used for the online control process, and the Product dimension accuracy is improved. With the decrease of Crop losses, the Droduct yield was increased with 0. 2%.
基金Item Sponsored by National Economy Trade Committee Foundation (ZZ0113A040201)
文摘The forward slip model with adhesion was used to derive the formula of calculating taper rolling time. The relation between the rolling time and the taper length and the relation between the rolling time and the taper thickness can be obtained. The numerical solution for this formula was used on site. According to the simulation result, the roll gap value should be changed linearly with rolling time.
基金supported by the National Natural Science Foundation of China(Nos.11232005 and11472104)the Doctoral Fund of Ministry of Education of China(No.20120074110020)
文摘As a typical rhythmic movement, human being＇s rhythmic gait movement can be generated by a central pattern generator （CPG） located in a spinal cord by self- oscillation. Some kinds of gait movements are caused by gait frequency and amplitude variances. As an important property of human being＇s motion vision, the attention selection mechanism plays a vital part in the regulation of gait movement. In this paper, the CPG model is amended under the condition of attention selection on the theoretical basis of Matsuoka neural oscillators. Regulation of attention selection signal for the CPG model parameters and structure is studied, which consequentially causes the frequency and amplitude changes of gait movement output. Further, the control strategy of the CPG model gait movement under the condition of attention selection is discussed, showing that the attention selection model can regulate the output model of CPG gait movement in three different ways. The realization of regulation on the gait movement frequency and amplitude shows a variety of regulation on the CPG gait movement made by attention selection and enriches the controllability of CPG gait movement, which demonstrates potential influence in engineering applications.
文摘The identification of control chart patterns is very important in statistical process control. Control chart patterns are categorized as natural and unnatural. The presence of unnatural patterns means that a process is out of statistical control and there are assignable causes for process variation that should be investigated. This paper proposes an artificial neural network algorithm to identify the three basic control chart patterns;natural, shift, and trend. This identification is in addition to the traditional statistical detection of runs in data, since runs are one of the out of control situations. It is assumed that a process starts as a natural pattern and then may undergo only one out of control pattern at a time. The performance of the proposed algorithm was evaluated by measuring the probability of success in identifying the three basic patterns accurately, and comparing these results with previous research work. The comparison showed that the proposed algorithm realized better identification than others.
基金Supported by the National Nutrition and Food Technology Research Institute(NNFTRI)of Shahid Beheshti University of Medical Sciences,Tehran,Iran
文摘AIM：To assess the relation between nutrient patterns and cataract risk.METHODS：This is a hospital-based case-control study with 97 cataract patients and 198 matched controls.Dietary consumption was collected through a valid food frequency questionnaire（FFQ）.Nutrient patterns were detected by applying factor analysis.Unconditional logistic regression models were used to estimate odds ratio（ORs） and 95%CIs.RESULTS：We extracted 5 main nutrient patterns.Factor 1 included niacin,thiamin,carbohydrates,protein,zinc,vitamin B6 and sodium（sodium pattern）.Factor 2 was characterized by oleic acid,monounsaturated fats,polyunsaturated fats,linoleic acid,trans fatty acid,linolenic acid,vitamin E and saturated fats（fatty acid pattern）.The third factor represented high intake of vitamin B12,vitamin D,cholesterol and calcium（mixed pattern）.The 4^（th） pattern was high in intake of beta and alpha carotene,vitamin A and vitamin C（antioxidant pattern）.Finally,the 5^（th） pattern loaded heavily on docosahexaenoic acid（DHA） and eicosapentaenoic acid（EPA）（omega-3 pattern）.In crude and multivariate analysis,the sodium pattern was associated with increased risk of cataract（OR=1.97,95%CI：1.09-3.96）.The fatty acid pattern elevated the risk of cataract（OR=1.94,95%CI：1.1-3.86）.Antioxidant pattern was associated with a significant 79% reduced risk（2^（nd） category compared with the 1st）.Omega-3 pattern was significantly negatively associated with risk of cataract（P=0.04）.CONCLUSION：These findings imply that nutrient patterns reflecting a combined consumption of nutrients might be important in the etiology of cataract.Additional studies with more efficient designs are warranted to confirm our findings.
基金funding support of this project from National Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2011ZX05010-002-005)
文摘1 Introduction Reservoir architecture analysis of distributary channel of Daqing oilfield has drawn consistent interest among development geologists and petroleum engineers over the last decade(Lv et al.,1999;Zhou et al.,2008;Zhang et
文摘The trajectory of the controlled system in phase space has been investigated, and different learning methods are applied to the single adaptive neuron controller according to the pattem of the control system. The advantage of the controller presented has been shown by simulation of a satellite attitude stability control system.
文摘The paper covers analysis and investigation of lighting automation system in low-traffic long-roads. The main objective is to provide optimal solution between expensive safe design that utilizes continuous street lighting system at night for the entire road, or inexpensive design that sacrifices the safety, relying on using vehicles lighting, to eliminate the problem of high cost energy consumption during the night operation of the road. By taking into account both of these factors, smart lighting automation system is proposed using Pattern Recognition Technique applied on vehicle number-plates. In this proposal, the road is sectionalized into zones, and based on smart Pattern Recognition Technique, the control system of the road lighting illuminates only the zone that the vehicles pass through. Economic analysis is provided in this paper to support the value of using this design of lighting control system.
