As anode materials of electrochemical energy storage system,metal sulfides with high theoretical capacities suffer from issues of materials smashing and deactivation due to huge volume change,resulting in the inferior...As anode materials of electrochemical energy storage system,metal sulfides with high theoretical capacities suffer from issues of materials smashing and deactivation due to huge volume change,resulting in the inferior cycle stability.In this paper,a new strategy of adding sulfur powder into the electrospinning precursor instead of employing sulfur powder during the sulfurizing treatment is proposed to prepare Fe_(9)S_(10)composites(CNF@G-Fe_(9)S_(10)-1).In those composites,most of Fe_(9)S_(10)particles are embedded in the graphene-carbon fibers with multiple protection.As anodes for potassium-ion batteries,CNF@G-Fe_(9)S_(10)-1 display higher rate capacities and more excellent stability(103.2 mAh·g^(-1)at 1000 mA·g^(-1)after 892 cycles)than Fe_(9)S_(10)composites synthesized by the traditional method.In addition,as anodes for potassiumion hybrid capacitors,they also deliver high capacities of102.8 mAh·g^(-1)at 1000 mA·g^(-1)after 100 cycles.The morphology characterization evidences indicate that the surface and integrity of CNF@G-Fe_(9)S_(10)-1 are more smooth and complete than the Fe_(9)S_(10)composites fabricated using a common method without sulfur power in electrospinning precursor.The excellent stability and high capacity of CNF@G-Fe_(9)S_(10)-1 can be attributed to nearly full-wrapped structure of Fe_(9)S_(10)in the carbon matrix arising from the new strategy.Owing to the formation of the structure,Fe_(9)S_(10)particles are protected from the pulverization,and the structure stability of hybrid carbon fibers is enhanced.This study may provide a new strategy for the controllable synthesis of metal sulfide-CNFs and their application for high stability energy storage.展开更多
Landslide dams often undergo seepage due to poor particle gradation and loose structure,yet most existing studies focus solely on overtopping-induced breaching mechanisms,neglecting the potential influence of pre-brea...Landslide dams often undergo seepage due to poor particle gradation and loose structure,yet most existing studies focus solely on overtopping-induced breaching mechanisms,neglecting the potential influence of pre-breaching seepage.Seepage may alter the dam's erodibility,structural stability,and material composition,thereby affecting the overtopping breaching process.Through flume experiments,this study investigates the breaching mechanisms of cohesionless landslide dams with different gradations within the same particle size range under coupled seepage-overtopping conditions.The results demonstrate that pre-breaching seepage significantly impacts breaching dynamics.Within a specific particle size range,compared to pure overtopping,seepage reduces downstream slope stability,increases material erodibility,shortens breaching duration,amplifies peak discharge,and advances the timing of peak flow.As the median particle size(D_(50))increases,the amplification effect of seepage on peak discharge initially increases then decreases,the advancement of peak flow timing diminishes,and the breach erosion rate declines.When D_(50)is sufficiently large,seepage has negligible effects on breach development.For smaller D_(50),seepage markedly accelerates breach widening and deepening.Furthermore,coupled seepage-overtopping extends the downstream deposition area and exacerbates channel erosion due to differences in sediment sorting.These findings highlight the critical role of seepage in landslide dam breaching,providing a scientific basis for hazard prevention and mitigation.展开更多
Small angle x-ray scattering(SAXS)is an advanced technique for characterizing the particle size distribution(PSD)of nanoparticles.However,the ill-posed nature of inverse problems in SAXS data analysis often reduces th...Small angle x-ray scattering(SAXS)is an advanced technique for characterizing the particle size distribution(PSD)of nanoparticles.However,the ill-posed nature of inverse problems in SAXS data analysis often reduces the accuracy of conventional methods.This article proposes a user-friendly software for PSD analysis,GranuSAS,which employs an algorithm that integrates truncated singular value decomposition(TSVD)with the Chahine method.This approach employs TSVD for data preprocessing,generating a set of initial solutions with noise suppression.A high-quality initial solution is subsequently selected via the L-curve method.This selected candidate solution is then iteratively refined by the Chahine algorithm,enforcing constraints such as non-negativity and improving physical interpretability.Most importantly,GranuSAS employs a parallel architecture that simultaneously yields inversion results from multiple shape models and,by evaluating the accuracy of each model's reconstructed scattering curve,offers a suggestion for model selection in material systems.To systematically validate the accuracy and efficiency of the software,verification was performed using both simulated and experimental datasets.The results demonstrate that the proposed software delivers both satisfactory accuracy and reliable computational efficiency.It provides an easy-to-use and reliable tool for researchers in materials science,helping them fully exploit the potential of SAXS in nanoparticle characterization.展开更多
With ensured network connectivity in quantum channels, the issue of distributing entangled particles in wireless quantum communication mesh networks can be equivalently regarded as a problem of quantum backbone nodes ...With ensured network connectivity in quantum channels, the issue of distributing entangled particles in wireless quantum communication mesh networks can be equivalently regarded as a problem of quantum backbone nodes selection in order to save cost and reduce complexity. A minimum spanning tree（ MST）-based quantum distribution algorithm（ QDMST） is presented to construct the mesh backbone network. First, the articulation points are found,and for each connected block uncovered by the articulation points, the general centers are solved. Then, both articulation points and general centers are classified as backbone nodes and an M ST is formed. The quantum path between every two neighbor nodes on the MST is calculated. The nodes on these paths are also classified as backbone nodes. Simulation results validate the advantages of QDMST in the average backbone nodes number and average quantum channel distance compared to the existing random selection algorithm under multiple network scenarios.展开更多
By using the probe data of two sorties airplane in the middle and southern parts of Hebei Province in 2007 spring,the characteristics of atmospheric aerosol particles concentration and size distribution in the area in...By using the probe data of two sorties airplane in the middle and southern parts of Hebei Province in 2007 spring,the characteristics of atmospheric aerosol particles concentration and size distribution in the area in the cloudy day situation were analyzed.The results showed that the overall trend of aerosol particles concentration in the weather systems which included the south branch trough and North China low vortex was the decrease as the height increased.However,if the cirrostratus was in the high altitude,it increased as the height increased.In the bottom of inversion layer,there existed the obvious accumulation of aerosol and cloud droplet.Affected by the complex weather systems,the aerosol particle size distribution presented the multi-peak type for the disturbance of updraft or turbulence.展开更多
Wedge-shaped copper casting experiment was conducted to study the engulfment behavior of TiB2 particle and the interaction between particle or cluster and the solid/liquid front in commercial pure aluminum matrix. The...Wedge-shaped copper casting experiment was conducted to study the engulfment behavior of TiB2 particle and the interaction between particle or cluster and the solid/liquid front in commercial pure aluminum matrix. The experimental results show that the particle size distribution obeys two separate systems in the whole wedge-cast sample. Furthermore, it is found that the big clusters are pushed to the center of the wedge shaped sample and the single particle or small clusters consisting of few particles are engulfed into the α-Al in the area of the sample edge. The cluster degree of particles varies in different areas, and its value is 0.2 and 0.6 for the cluster fraction in the edge and in the center of the wedge sample, respectively. The cluster diameter does not obey the normal distribution but approximately obeys lognormal distribution in the present work. More importantly, in the whole sample, the particle size obeys two separate log-normal distributions.展开更多
Polyaluminum chloride(PAC)was used as coagulant and suspended particles in kaolin water.Online instruments including turbidimeter and particle counter were used to monitor the flocculation process.An evaluation model ...Polyaluminum chloride(PAC)was used as coagulant and suspended particles in kaolin water.Online instruments including turbidimeter and particle counter were used to monitor the flocculation process.An evaluation model for demonstrating the impact on the flocculation effect was established based on the multiple linear regression analysis method.The parameter of the index weight of channels quantitatively described how the variation of floc particle population in different size ranges cause the decrement of turbidity.The study showed that the floc particles in different size ranges contributed differently to the decrease of turbidity and that the index weight of channel could excellently indicate the impact degree of floc particles dynamic distribution on flocculation effect.Therefore,the parameter may significantly benefit the development of coagulation and sedimentation techniques as well as the optimal coagulant selection.展开更多
Particle number and mass concentrations were measured in Beijing during the winter and summer periods in 2003, together with some other parameters including black carbon (BC) and meteorological conditions. Particle ma...Particle number and mass concentrations were measured in Beijing during the winter and summer periods in 2003, together with some other parameters including black carbon (BC) and meteorological conditions. Particle mass concentrations exhibited low seasonality, and the ratio of PM2.5/PM10 in winter was higher than that in summer. Particle number size distribution (PSD) was characterized by four modes and exhibited low seasonality. BC was well correlated with the number and mass concentrations of accumulation and coarse particles, indicating these size particles are related to anthropogenic activities. Particle mass and number concentrations (except ultra-fine and nucleation particles) followed well the trends of BC concentration for the majority of the day, indicating that most particles were associated with primary emissions. The diurnal number distributions of accumulation and coarse mode particles were characterized by two peaks.展开更多
The Dividing Distribution Function (DDF) method is one of the methods by which the particle size distribution of ultrafine powder can be evaluated from its small angle X-ray scattering data. In this paper, the stabili...The Dividing Distribution Function (DDF) method is one of the methods by which the particle size distribution of ultrafine powder can be evaluated from its small angle X-ray scattering data. In this paper, the stability of the solution obtained from DDF method has been investigated through optimizing the coefficient matrix, introducing a damping factor and a least square treatment. All calculations were accomplished with a microcomputer. It was shown that the average deviations of the size distribution obtained are not larger than the assigned random errors to the scattering intensities as long as the corresponding requirements are satisfied.展开更多
The Reynolds-averaged general dynamic equation(RAGDE)for the nanoparticle size distribution function is derived,including the contribution to particle coagulation resulting from the fluctuating concentration.The equat...The Reynolds-averaged general dynamic equation(RAGDE)for the nanoparticle size distribution function is derived,including the contribution to particle coagulation resulting from the fluctuating concentration.The equation together with that of a turbulent gas flow is solved numerically in the turbulent flow of a ventilation chamber with a jet on the wall based on the proposed model relating the fluctuating coagulation to the gradient of mean concentration.Some results are compared with the experimental data.The results show that the proposed model relating the fluctuating coagulation to the gradient of mean concentration is reasonable,and it is necessary to consider the contribution to coagulation resulting from the fluctuating concentration in such a flow.The changes of the particle number concentration M_(0) and the geometric mean diameter dg are more obvious in the core area of the jet,but less obvious in other areas.With the increase in the initial particle number concentration m00,the values of M_(0) and the standard deviation of the particle sizeσdecrease,but the value of d_(g) increases.The decrease in the initial particle diameter leads to the reduction of M_(0) andσand the increase in d_(g).With the increase in the Reynolds number,particles have few chances of collision,and hence the coagulation rate is reduced,leading to the increase in M_(0) andσand the decrease in d_(g).展开更多
In this research combustion of aluminum dust particles in a quiescent medium with spatially discrete sources distributed in a random way was studied by a numerical approach.A new thermal model was generated to estimat...In this research combustion of aluminum dust particles in a quiescent medium with spatially discrete sources distributed in a random way was studied by a numerical approach.A new thermal model was generated to estimate flame propagation speed in a lean/rich reaction medium.Flame speed for different particle diameters and the effects of various oxidizers such as carbon dioxide and oxygen on flame speed were studied.Nitrogen was considered the inert gas.In addition,the quenching distance and the minimum ignition energy(MIE) were studied as a function of dust concentration.Different burning time models for aluminum were employed and their results were compared with each other.The model was based on conduction heat transfer mechanism using the heat point source method.The combustion of single-particle was first studied and the solution was presented.Then the dust combustion was investigated using the superposition principle to include the effects of surrounding particles.It is found that larger particles have higher values of quenching distance in comparison with smaller particles in an assumed dust concentration.With the increase of dust concentration the value of MIE would be decreased for an assumed particle diameter.Considering random discrete heat sources method,the obtained results of random distribution of fuel particles in space provide closer and realistic predictions of the combustion physics of aluminum dust flame as compared with the experimental findings.展开更多
Sea salt aerosols play a critical role in regulating the global climate through their interactions with solar radiation.The size distribution of these particles is crucial in determining their bulk optical properties....Sea salt aerosols play a critical role in regulating the global climate through their interactions with solar radiation.The size distribution of these particles is crucial in determining their bulk optical properties.In this study,we analyzed in situ measured size distributions of sea salt aerosols from four field campaigns and used multi-mode lognormal size distributions to fit the data.We employed super-spheroids and coated super-spheroids to account for the particles’non-sphericity,inhomogeneity,and hysteresis effect during the deliquescence and crystallization processes.To compute the singlescattering properties of sea salt aerosols,we used the state-of-the-art invariant imbedding T-matrix method,which allows us to obtain accurate optical properties for sea salt aerosols with a maximum volume-equivalent diameter of 12μm at a wavelength of 532 nm.Our results demonstrated that the particle models developed in this study were successful in replicating both the measured depolarization and lidar ratios at various relative humidity(RH)levels.Importantly,we observed that large-size particles with diameters larger than 4μm had a substantial impact on the optical properties of sea salt aerosols,which has not been accounted for in previous studies.Specifically,excluding particles with diameters larger than 4μm led to underestimating the scattering and backscattering coefficients by 27%−38%and 43%−60%,respectively,for the ACE-Asia field campaign.Additionally,the depolarization ratios were underestimated by 0.15 within the 50%−70%RH range.These findings emphasize the necessity of considering large particle sizes for optical modeling of sea salt aerosols.展开更多
A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied . This method for the determination...A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied . This method for the determination of size distribution was statistical.展开更多
Size distribution of glutenin macropolymer （GMP） particles significantly affects the quality of final products in wheat. Six wheat varieties in eastern China were used for investigating the GMP content, particle siz...Size distribution of glutenin macropolymer （GMP） particles significantly affects the quality of final products in wheat. Six wheat varieties in eastern China were used for investigating the GMP content, particle size distribution and their relation. The results showed that the particle diameter of GMP changed from 0.38 μm to 269 μm. A typical bimodal curve of volume distribution of particles with peak values ranged from 4.44 μm to 5.36 μm and from 45.76 μm to 116.30 μm, respectively. Number distribution of particles showed the typical population with peak values in the range of 0.57-1.00 p.m. Proportions of granules 〈12μm, 12-80 μm and 〉80 μm were in the range of 17.1%-47.8%, 32.1%-50.3% and 10.2%-38.1% of total volume, respectively. The content of GMP was negatively correlated with the volume of GMP particles 〈12μm, but positively correlated with the volume of particles 〉80μm. The results suggested that the greater percentage of larger GMP particles is, the more GMP content there is in wheat grain.展开更多
The laminar boundary layer behind a constant-speed shock wave moving through a dusty gas along a solid surface is studied.The Saffman lift force acting on a spherical particle in a gas boundary layer is taken into acc...The laminar boundary layer behind a constant-speed shock wave moving through a dusty gas along a solid surface is studied.The Saffman lift force acting on a spherical particle in a gas boundary layer is taken into account.A method for calculating the density profile of dispersed phase near the wall is pro- posed and some numerical results are given.It is shown that behind the shock wave,there exists a curved thin layer where the density of particles is many times higher than the original one.This dust collection effect may be of essential importance to the problem of dust explosion in industry.展开更多
In the context of unified hydrodynamics, we discuss the pseudorapidity distributions of the charged particles produced in Au-Au and Cu-Cu collisions at the low RHIC energies of √SNN = 19.6 and 22.4 GeV, respectively....In the context of unified hydrodynamics, we discuss the pseudorapidity distributions of the charged particles produced in Au-Au and Cu-Cu collisions at the low RHIC energies of √SNN = 19.6 and 22.4 GeV, respectively. It is found that the unified hydrodynamics alone can give a good description to the experimental measurements. This is different from the collisions at the maximum RHIC energy of √SNN = 200 GeV or at LHC energy of √SNN= 2.76 TeV, in which the leading particles must be taken into account so that we can properly explain the experimental observations.展开更多
The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compressio...The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.展开更多
Developing the railway transport sector is a challenging scientific,economic and social research topic starting with ensuring human security.The main topic that should be developed in that sense is the ballast stabili...Developing the railway transport sector is a challenging scientific,economic and social research topic starting with ensuring human security.The main topic that should be developed in that sense is the ballast stability and dynamical behaviour under external loading and environmental changes.This paper investigates the effect of particle size distribution and normal pressure on the mechanical response of a ballast bed.Grading curves of ballast layers with different sizes are illustrated to discuss their strength behaviour under various strains to deduce the significant effect on the direct shear performance of the ballast layer.Direct shear tests with different Particle Size Distribution(PSD)were reproduced using the Discrete Element Method(DEM).It is noticed that when the number of small-sized ballast increases,the shear strength and the friction angle increase to varying degrees under different normal pressures,with an average increase of 27%and 8%,respectively.When the number of large-sized ballast decreases,the shear strength and the friction angle decrease to varying degrees under different normal pressures,with an average decrease of 6%and 3%,respectively.展开更多
Accurate simulation of ice accretion of supercooled large droplet(SLD)is pivotal for the international airworthiness certification of large aircraft.Its complex dynamics behavior and broad particle size distributions ...Accurate simulation of ice accretion of supercooled large droplet(SLD)is pivotal for the international airworthiness certification of large aircraft.Its complex dynamics behavior and broad particle size distributions pose significant challenges to reliable CFD predictions.A numerical model of multi-particle SLD coupling breaking,bouncing and splashing behaviors is established to explore the relationship between dynamics behavior and particle size.The results show that the peak value of droplet collection efficiencyβdecreases due to splashing.The bounce phenomenon will make the impact limit S_(m)of the water drops decrease.With the increase of the SLD particle size,the water drop bounce point gradually moves toward the trailing edge of the wing.The critical breaking diameter of SLD at an airflow velocity of 50 m/s is approximately 100μm.When the SLD particle size increases,the height of the water droplet shelter zone on the upper edge of the wing gradually decreases,and the velocity in the Y direction decreases first and then increases in the opposite direction,increasing the probability of SLD hitting the wing again.Large particle droplets have a higher effect on the impact limit S_(m)than smaller droplets.Therefore,in the numerical simulation of the SLD operating conditions,it is very important to ensure the proportion of large particle size water droplets.展开更多
Application of particle image velocity (PIV) techniques for measuringparticle size distribution and total number in an activation chamber of desulfurization system isintroduced. Watersheld algorithm is used to choose ...Application of particle image velocity (PIV) techniques for measuringparticle size distribution and total number in an activation chamber of desulfurization system isintroduced. Watersheld algorithm is used to choose the suitable initial gray level threshold whichis used to change the gray level images taken by PIV to black and white ones, then every particle inan image is isolated totally. For every isolating particle, its contour is tracked by the edgeenhancement filter function and kept by Freeman s chain code. Based on a set of particle s chincode, its size and size distribution are calculated and sorted. Finally, the experimental data ofcalcium particles and water drops, separately injected into the activation chamber, and the erroranalysis of data are given out.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.51772082 and 51804106)the Natural Science Foundation of Hunan Province(Nos.2019JJ30002 and 2019JJ50061)。
文摘As anode materials of electrochemical energy storage system,metal sulfides with high theoretical capacities suffer from issues of materials smashing and deactivation due to huge volume change,resulting in the inferior cycle stability.In this paper,a new strategy of adding sulfur powder into the electrospinning precursor instead of employing sulfur powder during the sulfurizing treatment is proposed to prepare Fe_(9)S_(10)composites(CNF@G-Fe_(9)S_(10)-1).In those composites,most of Fe_(9)S_(10)particles are embedded in the graphene-carbon fibers with multiple protection.As anodes for potassium-ion batteries,CNF@G-Fe_(9)S_(10)-1 display higher rate capacities and more excellent stability(103.2 mAh·g^(-1)at 1000 mA·g^(-1)after 892 cycles)than Fe_(9)S_(10)composites synthesized by the traditional method.In addition,as anodes for potassiumion hybrid capacitors,they also deliver high capacities of102.8 mAh·g^(-1)at 1000 mA·g^(-1)after 100 cycles.The morphology characterization evidences indicate that the surface and integrity of CNF@G-Fe_(9)S_(10)-1 are more smooth and complete than the Fe_(9)S_(10)composites fabricated using a common method without sulfur power in electrospinning precursor.The excellent stability and high capacity of CNF@G-Fe_(9)S_(10)-1 can be attributed to nearly full-wrapped structure of Fe_(9)S_(10)in the carbon matrix arising from the new strategy.Owing to the formation of the structure,Fe_(9)S_(10)particles are protected from the pulverization,and the structure stability of hybrid carbon fibers is enhanced.This study may provide a new strategy for the controllable synthesis of metal sulfide-CNFs and their application for high stability energy storage.
基金support of the National Natural Science Foundation of China(42107189,U20A20111)。
文摘Landslide dams often undergo seepage due to poor particle gradation and loose structure,yet most existing studies focus solely on overtopping-induced breaching mechanisms,neglecting the potential influence of pre-breaching seepage.Seepage may alter the dam's erodibility,structural stability,and material composition,thereby affecting the overtopping breaching process.Through flume experiments,this study investigates the breaching mechanisms of cohesionless landslide dams with different gradations within the same particle size range under coupled seepage-overtopping conditions.The results demonstrate that pre-breaching seepage significantly impacts breaching dynamics.Within a specific particle size range,compared to pure overtopping,seepage reduces downstream slope stability,increases material erodibility,shortens breaching duration,amplifies peak discharge,and advances the timing of peak flow.As the median particle size(D_(50))increases,the amplification effect of seepage on peak discharge initially increases then decreases,the advancement of peak flow timing diminishes,and the breach erosion rate declines.When D_(50)is sufficiently large,seepage has negligible effects on breach development.For smaller D_(50),seepage markedly accelerates breach widening and deepening.Furthermore,coupled seepage-overtopping extends the downstream deposition area and exacerbates channel erosion due to differences in sediment sorting.These findings highlight the critical role of seepage in landslide dam breaching,providing a scientific basis for hazard prevention and mitigation.
基金Project supported by the Project of the Anhui Provincial Natural Science Foundation(Grant No.2308085MA19)Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA0410401)+2 种基金the National Natural Science Foundation of China(Grant No.52202120)the National Key Research and Development Program of China(Grant No.2023YFA1609800)USTC Research Funds of the Double First-Class Initiative(Grant No.YD2310002013)。
文摘Small angle x-ray scattering(SAXS)is an advanced technique for characterizing the particle size distribution(PSD)of nanoparticles.However,the ill-posed nature of inverse problems in SAXS data analysis often reduces the accuracy of conventional methods.This article proposes a user-friendly software for PSD analysis,GranuSAS,which employs an algorithm that integrates truncated singular value decomposition(TSVD)with the Chahine method.This approach employs TSVD for data preprocessing,generating a set of initial solutions with noise suppression.A high-quality initial solution is subsequently selected via the L-curve method.This selected candidate solution is then iteratively refined by the Chahine algorithm,enforcing constraints such as non-negativity and improving physical interpretability.Most importantly,GranuSAS employs a parallel architecture that simultaneously yields inversion results from multiple shape models and,by evaluating the accuracy of each model's reconstructed scattering curve,offers a suggestion for model selection in material systems.To systematically validate the accuracy and efficiency of the software,verification was performed using both simulated and experimental datasets.The results demonstrate that the proposed software delivers both satisfactory accuracy and reliable computational efficiency.It provides an easy-to-use and reliable tool for researchers in materials science,helping them fully exploit the potential of SAXS in nanoparticle characterization.
基金Prospective Research Project on Future Networks of Jiangsu Province,China(No.BY2013095-1-18)
文摘With ensured network connectivity in quantum channels, the issue of distributing entangled particles in wireless quantum communication mesh networks can be equivalently regarded as a problem of quantum backbone nodes selection in order to save cost and reduce complexity. A minimum spanning tree（ MST）-based quantum distribution algorithm（ QDMST） is presented to construct the mesh backbone network. First, the articulation points are found,and for each connected block uncovered by the articulation points, the general centers are solved. Then, both articulation points and general centers are classified as backbone nodes and an M ST is formed. The quantum path between every two neighbor nodes on the MST is calculated. The nodes on these paths are also classified as backbone nodes. Simulation results validate the advantages of QDMST in the average backbone nodes number and average quantum channel distance compared to the existing random selection algorithm under multiple network scenarios.
基金Supported by The Project of Key and Open Laboratory for Cloud Fog Physics Environment of China Meteorological Administration(2009Z0034)The Special Project of Public Welfare Industry(Mete-orology) Science Research of Science and Technology Ministry(GY-HY200806001)Research and Development Projects of Weather Modification Office in Hebei Province:Aircraft Observations Under Fog and Haze Conditions in Hebei Province(10ky04)
文摘By using the probe data of two sorties airplane in the middle and southern parts of Hebei Province in 2007 spring,the characteristics of atmospheric aerosol particles concentration and size distribution in the area in the cloudy day situation were analyzed.The results showed that the overall trend of aerosol particles concentration in the weather systems which included the south branch trough and North China low vortex was the decrease as the height increased.However,if the cirrostratus was in the high altitude,it increased as the height increased.In the bottom of inversion layer,there existed the obvious accumulation of aerosol and cloud droplet.Affected by the complex weather systems,the aerosol particle size distribution presented the multi-peak type for the disturbance of updraft or turbulence.
文摘Wedge-shaped copper casting experiment was conducted to study the engulfment behavior of TiB2 particle and the interaction between particle or cluster and the solid/liquid front in commercial pure aluminum matrix. The experimental results show that the particle size distribution obeys two separate systems in the whole wedge-cast sample. Furthermore, it is found that the big clusters are pushed to the center of the wedge shaped sample and the single particle or small clusters consisting of few particles are engulfed into the α-Al in the area of the sample edge. The cluster degree of particles varies in different areas, and its value is 0.2 and 0.6 for the cluster fraction in the edge and in the center of the wedge sample, respectively. The cluster diameter does not obey the normal distribution but approximately obeys lognormal distribution in the present work. More importantly, in the whole sample, the particle size obeys two separate log-normal distributions.
基金supported by the National Natural Science Foundation of China(No.50678047)the National High Technology Research and Development Program of China(No.2006AA06Z305)the National Science and Technology Project of Eleventh Five Years(No.2006BAJ08B05-2)
文摘Polyaluminum chloride(PAC)was used as coagulant and suspended particles in kaolin water.Online instruments including turbidimeter and particle counter were used to monitor the flocculation process.An evaluation model for demonstrating the impact on the flocculation effect was established based on the multiple linear regression analysis method.The parameter of the index weight of channels quantitatively described how the variation of floc particle population in different size ranges cause the decrement of turbidity.The study showed that the floc particles in different size ranges contributed differently to the decrease of turbidity and that the index weight of channel could excellently indicate the impact degree of floc particles dynamic distribution on flocculation effect.Therefore,the parameter may significantly benefit the development of coagulation and sedimentation techniques as well as the optimal coagulant selection.
文摘Particle number and mass concentrations were measured in Beijing during the winter and summer periods in 2003, together with some other parameters including black carbon (BC) and meteorological conditions. Particle mass concentrations exhibited low seasonality, and the ratio of PM2.5/PM10 in winter was higher than that in summer. Particle number size distribution (PSD) was characterized by four modes and exhibited low seasonality. BC was well correlated with the number and mass concentrations of accumulation and coarse particles, indicating these size particles are related to anthropogenic activities. Particle mass and number concentrations (except ultra-fine and nucleation particles) followed well the trends of BC concentration for the majority of the day, indicating that most particles were associated with primary emissions. The diurnal number distributions of accumulation and coarse mode particles were characterized by two peaks.
文摘The Dividing Distribution Function (DDF) method is one of the methods by which the particle size distribution of ultrafine powder can be evaluated from its small angle X-ray scattering data. In this paper, the stability of the solution obtained from DDF method has been investigated through optimizing the coefficient matrix, introducing a damping factor and a least square treatment. All calculations were accomplished with a microcomputer. It was shown that the average deviations of the size distribution obtained are not larger than the assigned random errors to the scattering intensities as long as the corresponding requirements are satisfied.
基金Project supported by the Major Program of the National Natural Science Foundation of China(No.91852102)。
文摘The Reynolds-averaged general dynamic equation(RAGDE)for the nanoparticle size distribution function is derived,including the contribution to particle coagulation resulting from the fluctuating concentration.The equation together with that of a turbulent gas flow is solved numerically in the turbulent flow of a ventilation chamber with a jet on the wall based on the proposed model relating the fluctuating coagulation to the gradient of mean concentration.Some results are compared with the experimental data.The results show that the proposed model relating the fluctuating coagulation to the gradient of mean concentration is reasonable,and it is necessary to consider the contribution to coagulation resulting from the fluctuating concentration in such a flow.The changes of the particle number concentration M_(0) and the geometric mean diameter dg are more obvious in the core area of the jet,but less obvious in other areas.With the increase in the initial particle number concentration m00,the values of M_(0) and the standard deviation of the particle sizeσdecrease,but the value of d_(g) increases.The decrease in the initial particle diameter leads to the reduction of M_(0) andσand the increase in d_(g).With the increase in the Reynolds number,particles have few chances of collision,and hence the coagulation rate is reduced,leading to the increase in M_(0) andσand the decrease in d_(g).
文摘In this research combustion of aluminum dust particles in a quiescent medium with spatially discrete sources distributed in a random way was studied by a numerical approach.A new thermal model was generated to estimate flame propagation speed in a lean/rich reaction medium.Flame speed for different particle diameters and the effects of various oxidizers such as carbon dioxide and oxygen on flame speed were studied.Nitrogen was considered the inert gas.In addition,the quenching distance and the minimum ignition energy(MIE) were studied as a function of dust concentration.Different burning time models for aluminum were employed and their results were compared with each other.The model was based on conduction heat transfer mechanism using the heat point source method.The combustion of single-particle was first studied and the solution was presented.Then the dust combustion was investigated using the superposition principle to include the effects of surrounding particles.It is found that larger particles have higher values of quenching distance in comparison with smaller particles in an assumed dust concentration.With the increase of dust concentration the value of MIE would be decreased for an assumed particle diameter.Considering random discrete heat sources method,the obtained results of random distribution of fuel particles in space provide closer and realistic predictions of the combustion physics of aluminum dust flame as compared with the experimental findings.
基金supported by the National Natural Science Foundation of China(Grant Nos.42022038,and 42090030).
文摘Sea salt aerosols play a critical role in regulating the global climate through their interactions with solar radiation.The size distribution of these particles is crucial in determining their bulk optical properties.In this study,we analyzed in situ measured size distributions of sea salt aerosols from four field campaigns and used multi-mode lognormal size distributions to fit the data.We employed super-spheroids and coated super-spheroids to account for the particles’non-sphericity,inhomogeneity,and hysteresis effect during the deliquescence and crystallization processes.To compute the singlescattering properties of sea salt aerosols,we used the state-of-the-art invariant imbedding T-matrix method,which allows us to obtain accurate optical properties for sea salt aerosols with a maximum volume-equivalent diameter of 12μm at a wavelength of 532 nm.Our results demonstrated that the particle models developed in this study were successful in replicating both the measured depolarization and lidar ratios at various relative humidity(RH)levels.Importantly,we observed that large-size particles with diameters larger than 4μm had a substantial impact on the optical properties of sea salt aerosols,which has not been accounted for in previous studies.Specifically,excluding particles with diameters larger than 4μm led to underestimating the scattering and backscattering coefficients by 27%−38%and 43%−60%,respectively,for the ACE-Asia field campaign.Additionally,the depolarization ratios were underestimated by 0.15 within the 50%−70%RH range.These findings emphasize the necessity of considering large particle sizes for optical modeling of sea salt aerosols.
文摘A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied . This method for the determination of size distribution was statistical.
基金Supported by the National Key Research and Development Program of China(2016YFD0300408)the Anhui Provincial Natural Science Foundation(1408085MC48)
文摘Size distribution of glutenin macropolymer （GMP） particles significantly affects the quality of final products in wheat. Six wheat varieties in eastern China were used for investigating the GMP content, particle size distribution and their relation. The results showed that the particle diameter of GMP changed from 0.38 μm to 269 μm. A typical bimodal curve of volume distribution of particles with peak values ranged from 4.44 μm to 5.36 μm and from 45.76 μm to 116.30 μm, respectively. Number distribution of particles showed the typical population with peak values in the range of 0.57-1.00 p.m. Proportions of granules 〈12μm, 12-80 μm and 〉80 μm were in the range of 17.1%-47.8%, 32.1%-50.3% and 10.2%-38.1% of total volume, respectively. The content of GMP was negatively correlated with the volume of GMP particles 〈12μm, but positively correlated with the volume of particles 〉80μm. The results suggested that the greater percentage of larger GMP particles is, the more GMP content there is in wheat grain.
文摘The laminar boundary layer behind a constant-speed shock wave moving through a dusty gas along a solid surface is studied.The Saffman lift force acting on a spherical particle in a gas boundary layer is taken into account.A method for calculating the density profile of dispersed phase near the wall is pro- posed and some numerical results are given.It is shown that behind the shock wave,there exists a curved thin layer where the density of particles is many times higher than the original one.This dust collection effect may be of essential importance to the problem of dust explosion in industry.
基金Supported by the Shanghai Key Lab of Modern Optical System
文摘In the context of unified hydrodynamics, we discuss the pseudorapidity distributions of the charged particles produced in Au-Au and Cu-Cu collisions at the low RHIC energies of √SNN = 19.6 and 22.4 GeV, respectively. It is found that the unified hydrodynamics alone can give a good description to the experimental measurements. This is different from the collisions at the maximum RHIC energy of √SNN = 200 GeV or at LHC energy of √SNN= 2.76 TeV, in which the leading particles must be taken into account so that we can properly explain the experimental observations.
基金financially supported by the National Natural Science Foundation of China(Nos.52174092,51904290,and 52374147)the Natural Science Foundation of Jiangsu Province,China(No.BK20220157)+2 种基金the Fundamental Research Funds for the Central Universities,China(No.2022YCPY0202)the National Key Research and Development Program of China(No.2023YFC3804204)the Major Program of Xinjiang Uygur Autonomous Region S cience and Technology(No.2023A01002)。
文摘The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.
基金"PSPC Régions n°2"("Projets Structurants des Pôles de Compétitivitéen région")funded by Conseil Régional Hauts-de-France and BPI.
文摘Developing the railway transport sector is a challenging scientific,economic and social research topic starting with ensuring human security.The main topic that should be developed in that sense is the ballast stability and dynamical behaviour under external loading and environmental changes.This paper investigates the effect of particle size distribution and normal pressure on the mechanical response of a ballast bed.Grading curves of ballast layers with different sizes are illustrated to discuss their strength behaviour under various strains to deduce the significant effect on the direct shear performance of the ballast layer.Direct shear tests with different Particle Size Distribution(PSD)were reproduced using the Discrete Element Method(DEM).It is noticed that when the number of small-sized ballast increases,the shear strength and the friction angle increase to varying degrees under different normal pressures,with an average increase of 27%and 8%,respectively.When the number of large-sized ballast decreases,the shear strength and the friction angle decrease to varying degrees under different normal pressures,with an average decrease of 6%and 3%,respectively.
基金supported in part by the National Natural Science Foundation of China(No.52276009)。
文摘Accurate simulation of ice accretion of supercooled large droplet(SLD)is pivotal for the international airworthiness certification of large aircraft.Its complex dynamics behavior and broad particle size distributions pose significant challenges to reliable CFD predictions.A numerical model of multi-particle SLD coupling breaking,bouncing and splashing behaviors is established to explore the relationship between dynamics behavior and particle size.The results show that the peak value of droplet collection efficiencyβdecreases due to splashing.The bounce phenomenon will make the impact limit S_(m)of the water drops decrease.With the increase of the SLD particle size,the water drop bounce point gradually moves toward the trailing edge of the wing.The critical breaking diameter of SLD at an airflow velocity of 50 m/s is approximately 100μm.When the SLD particle size increases,the height of the water droplet shelter zone on the upper edge of the wing gradually decreases,and the velocity in the Y direction decreases first and then increases in the opposite direction,increasing the probability of SLD hitting the wing again.Large particle droplets have a higher effect on the impact limit S_(m)than smaller droplets.Therefore,in the numerical simulation of the SLD operating conditions,it is very important to ensure the proportion of large particle size water droplets.
基金The Special Funds for State Key Projects for Fun- damental Research (G1999022201-04).
文摘Application of particle image velocity (PIV) techniques for measuringparticle size distribution and total number in an activation chamber of desulfurization system isintroduced. Watersheld algorithm is used to choose the suitable initial gray level threshold whichis used to change the gray level images taken by PIV to black and white ones, then every particle inan image is isolated totally. For every isolating particle, its contour is tracked by the edgeenhancement filter function and kept by Freeman s chain code. Based on a set of particle s chincode, its size and size distribution are calculated and sorted. Finally, the experimental data ofcalcium particles and water drops, separately injected into the activation chamber, and the erroranalysis of data are given out.
