Unmanned aircraft are highly vulnerable to crosswind-induced turbulence during complex maneuvers such as turning,which can significantly compromise control and reduce autopilot effectiveness.This paper presents a nove...Unmanned aircraft are highly vulnerable to crosswind-induced turbulence during complex maneuvers such as turning,which can significantly compromise control and reduce autopilot effectiveness.This paper presents a novel control strategy to improve the controllability of unmanned aircraft in challenging wind conditions.First,the equations of motion for the aircraft are reformulated as a system of stochastic differential equations,which are subsequently transformed into a deterministic form.By modeling turbulence as a Gaussian random process and incorporating it directly into the control system,the proposed method proactively compensates for the adverse effects of turbulence.The transformation is achieved using semi-invariant techniques.Second,the control problem is formulated as an optimization task,aiming to minimize the deviation between the actual and desired turn characteristics,specifically the angular velocity.Finally,a new numerical method with proven global convergence is employed to compute the optimal autopilot parameters.Simulation results using a medium-range unmanned aircraft model under continuous turbulent gusts demonstrate that the proposed method significantly outperforms existing approaches,ensuring both stability and precision in turbulent wind conditions.展开更多
To address the high costs and operational instability of distribution networks caused by the large-scale integration of distributed energy resources(DERs)(such as photovoltaic(PV)systems,wind turbines(WT),and energy s...To address the high costs and operational instability of distribution networks caused by the large-scale integration of distributed energy resources(DERs)(such as photovoltaic(PV)systems,wind turbines(WT),and energy storage(ES)devices),and the increased grid load fluctuations and safety risks due to uncoordinated electric vehicles(EVs)charging,this paper proposes a novel dual-scale hierarchical collaborative optimization strategy.This strategy decouples system-level economic dispatch from distributed EV agent control,effectively solving the resource coordination conflicts arising from the high computational complexity,poor scalability of existing centralized optimization,or the reliance on local information decision-making in fully decentralized frameworks.At the lower level,an EV charging and discharging model with a hybrid discrete-continuous action space is established,and optimized using an improved Parameterized Deep Q-Network(PDQN)algorithm,which directly handles mode selection and power regulation while embedding physical constraints to ensure safety.At the upper level,microgrid(MG)operators adopt a dynamic pricing strategy optimized through Deep Reinforcement Learning(DRL)to maximize economic benefits and achieve peak-valley shaving.Simulation results show that the proposed strategy outperforms traditional methods,reducing the total operating cost of the MG by 21.6%,decreasing the peak-to-valley load difference by 33.7%,reducing the number of voltage limit violations by 88.9%,and lowering the average electricity cost for EV users by 15.2%.This method brings a win-win result for operators and users,providing a reliable and efficient scheduling solution for distribution networks with high renewable energy penetration rates.展开更多
To further enhance the recovery rate of low-temperature waste heat,the low-temperature flue gas in the sinter annular cooler was chosen as the heat source of an organic Rankine cycle(ORC)system,and the comprehensive e...To further enhance the recovery rate of low-temperature waste heat,the low-temperature flue gas in the sinter annular cooler was chosen as the heat source of an organic Rankine cycle(ORC)system,and the comprehensive evaluation of energy,exergy and economic performance of the ORC system was conducted deeply.The energy,exergy and economic performance models of the ORC system were established,and proper candidate organic working fluids(OWFs)were selected based on the thermo-physical properties of OWF and operating characteristics of ORC system.Then,the effects of ORC crucial parameters on the system energy,exergy and economic performances were evaluated in detail.Finally,the bi-objective optimization based on the genetic algorithm was conducted to analyze the optimal performance of the ORC system under the designed ORC crucial parameters,and the exergy efficiency and electricity production cost were set as the evaluation indexes of parametric optimization.The results indicate that the ORC system with the higher evaporation temperature and lower condensation temperature can obtain the larger system exergy efficiency and smaller electricity production cost.The smaller the superheat degree of OWF and pinch-point temperature difference in the evaporator are,the better the energy and exergy performances of the ORC system are.Under the optimization results,R245fa has the best comprehensive performance with the exergy efficiency of 46.34%and electricity production cost of 0.12123$/kWh among the selected candidate OWFs,which should be preferentially chosen as the OWF of the ORC system.展开更多
Rapid and reliable onboard optimization of bank angle profiles is crucial for mitigating uncertainties during Mars atmospheric entry.This paper presents a neural-network-accelerated methodology for optimizing parametr...Rapid and reliable onboard optimization of bank angle profiles is crucial for mitigating uncertainties during Mars atmospheric entry.This paper presents a neural-network-accelerated methodology for optimizing parametric bank angle profiles in Mars atmospheric entry missions.The methodology includes a universal approach to handling path constraints and a reliable solution method based on the Particle Swarm Optimization(PSO)algorithm.For illustrative purposes,a mission with the objective of maximizing terminal altitude is considered.The original entry optimization problem is converted into optimizing three coefficients for the bank angle profiles with terminal constraints by formulating a parametric Mars entry bank angle profile and constraint handling methods.The parameter optimization problem is addressed using the PSO algorithm,with reliability enhanced by increasing the PSO swarm size.To improve computational efficiency,an enhanced Deep Operator Network(Deep ONet)is used as a dynamics solver to predict terminal states under various bank angle profiles rapidly.Numerical simulations demonstrate that the proposed methodology ensures reliable convergence with a sufficiently large PSO swarm while maintaining high computational efficiency facilitated by the neural-network-based dynamics solver.Compared to the existing methodologies,this methodology offers a streamlined process,the reduced sensitivity to initial guesses,and the improved computational efficiency.展开更多
In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the op...In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.展开更多
The surface injection and production system(SIPS)is a critical component for effective injection and production processes in underground natural gas storage.As a vital channel,the rational design of the surface inject...The surface injection and production system(SIPS)is a critical component for effective injection and production processes in underground natural gas storage.As a vital channel,the rational design of the surface injection and production(SIP)pipeline significantly impacts efficiency.This paper focuses on the SIP pipeline and aims to minimize the investment costs of surface projects.An optimization model under harmonized injection and production conditions was constructed to transform the optimization problem of the SIP pipeline design parameters into a detailed analysis of the injection condition model and the production condition model.This paper proposes a hybrid genetic algorithm generalized reduced gradient(HGA-GRG)method,and compares it with the traditional genetic algorithm(GA)in a practical case study.The HGA-GRG demonstrated significant advantages in optimization outcomes,reducing the initial cost by 345.371×10^(4) CNY compared to the GA,validating the effectiveness of the model.By adjusting algorithm parameters,the optimal iterative results of the HGA-GRG were obtained,providing new research insights for the optimal design of a SIPS.展开更多
Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a syst...Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a systematic overview of recent advancements in metaheuristic algorithms and highlights their applications in e-Health.We selected representative algorithms published between 2019 and 2024,and quantified their influence using an entropy-weighted method based on journal impact factors and citation counts.CThe Harris Hawks Optimizer(HHO)demonstrated the highest early citation impact.The study also examined applications in disease prediction models,clinical decision support,and intelligent health monitoring.Notably,the Chaotic Salp Swarm Algorithm(CSSA)achieved 99.69% accuracy in detecting Novel Coronavirus Pneumonia.Future research should progress in three directions:improving theoretical reliability and performance predictability in medical contexts;designing more adaptive and deployable mechanisms for real-world systems;and integrating ethical,privacy,and technological considerations to enable precision medicine,digital twins,and intelligent medical devices.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightw...Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightweight of two distinct material characteristics.MFHTWTs can achieve energy absorption through the coupling of material plastic deformation and fracture,demonstrating significant engineering value in passive safety.This review provides a comprehensive examination of the crashworthiness topology optimization of MFHTWTs,aiming to demonstrate that a deeply integrated approach combining topology and parameter opti-mization can realize an optimal design method for MFHTWTs,thereby maximizing the functional utilization of limited material.Firstly,the review highlights the crashworthiness topology optimization methods(CTOMs)based on thin-walled structures.With a particular focus on metal,the review discusses both the practical ap-plicability and limitations of CTOMs under crash conditions.Additionally,based on the methodology of the equivalent static load method(ESLM),the review emphasizes that topology optimization methods considering continuous fiber paths and multi-material interface connections are also applicable to the crashworthiness op-timization of MFHTWTs.Furthermore,to couple structural parameters and configuration characteristics,in-tegrated topology optimization methods,including parameter optimization,are proposed to provide a valuable reference for the global optimization of MFHTWTs.Thus,these methods can establish the mapping relationship between key parameters and the structural energy absorption capacity.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified...Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.展开更多
The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous c...The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.展开更多
Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introdu...Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.展开更多
Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a ...Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a laser energy output of 2.2 mJ at 10μm was obtained.By tuning the angle and temperature,a tunable laser output covering the wavelength range from 6μm to 17μm was obtained with a tuning precision better than 3 nm.The corresponding optical-to-optical conversion efficiency was 2.8%,and the slope efficiency was 4.4%.The damage effect of the output laser on detectors was also investigated,and point damage to the detector occurred at an output energy of 16.4μJ.The laser system has the advantages of miniaturization,a wide tuning range,high energy and high tuning resolution.Its broadband laser characteristics make it highly valuable for applications in atmospheric detection,infrared spectroscopy and electro-optical countermeasures.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
The roller is one of the fundamental elements of ore belt conveyor systems since it supports,guides,and directs material on the belt.This component comprises a body(the external tube)that rotates around a fixed shaft ...The roller is one of the fundamental elements of ore belt conveyor systems since it supports,guides,and directs material on the belt.This component comprises a body(the external tube)that rotates around a fixed shaft supported by easels.The external tube and shaft of rollers used in ore conveyor belts are mostly made of steel,resulting in high mass,hindering maintenance and replacement.Aiming to achieve mass reduction,we conducted a structural optimization of a roller with a polymeric external tube(hereafter referred to as a polymeric roller),seeking the optimal values for two design parameters:the inner diameter of the external tube and the shaft diameter.The optimization was constrained by admissible values for maximum stress,maximum deflection and misalignment angle between the shaft and bearings.A finite element model was built in Ansys Workbench to obtain the structural response of the system.The roller considered is composed of an external tube made of high-density polyethylene(HDPE),bearing seats of polyamide 6(PA6),and a steel shaft.To characterize the polymeric materials(HDPE and PA6),stress relaxation tests were conducted,and the data on shear modulus variation over time were inserted into the model to calculate Prony series terms to account for viscoelastic effects.The roller optimization was performed using surrogate modeling based on radial basis functions,with the Globalized Bounded Nelder-Mead(GBNM)algorithm as the optimizer.Two optimization cases were conducted.In the first case,concerning the roller’s initial material settings,the designs found violated the constraints and could not reduce mass.In the second case,by using PA6 in both bearing seats and the tube,a design configuration was found that respected all constraints and reduced the roller mass by 15.5%,equivalent to 5.15 kg.This study is among the first to integrate experimentally obtained viscoelastic data into the surrogate-based optimization of polymeric rollers,combining methodological innovation with industrial relevance.展开更多
We propose an optimization method based on evolutionary computation for the design of broadband high-efficiency current-biased reverse load-modulation power amplifiers(CB-RLM PAs).First,given the reverse load-modulati...We propose an optimization method based on evolutionary computation for the design of broadband high-efficiency current-biased reverse load-modulation power amplifiers(CB-RLM PAs).First,given the reverse load-modulation characteristics of CB-RLM PAs,a comprehensive objective function is proposed that combines multi-state impedance trajectory constraints with in-band performance deviations.For the saturation and 6 dB power back-off(PBO)states,approximately optimal impedance regions on the Smith chart are derived using impedance constraint circles based on load-pull simulations.These regions are used together with in-band performance deviations(e.g.,saturated efficiency,6 dB PBO efficiency,and saturated output power)for matching network optimization and design.Second,a multi-objective evolutionary algorithm based on decomposition with adaptive weights,neighborhood,and global replacement is integrated with harmonic balance simulations to optimize design parameters and evaluate performance.Finally,to validate the proposed method,a broadband CB-RLM PA operating from 0.6 to 1.8 GHz is designed and fabricated.Measurement results show that the efficiencies at saturation,6 dB PBO,and 8 dB PBO all exceed 43.6%,with saturated output power being maintained at 40.9–41.5 dBm,which confirms the feasibility and effectiveness of the proposed broadband high-efficiency CB-RLM PA optimization and design approach.展开更多
Although the thin and cold Martian atmosphere provides the feasibility of rotorcraft flight on Mars,rotors designed for denser Earth atmosphere with small angles of attack hardly generate enough thrust for rotorcraft ...Although the thin and cold Martian atmosphere provides the feasibility of rotorcraft flight on Mars,rotors designed for denser Earth atmosphere with small angles of attack hardly generate enough thrust for rotorcraft flight at conventional rotational speeds in the Martian atmosphere.In this paper,we employ the Particle Swarm Optimization(PSO)algorithm to search for the control points of the Bezier curve,completing the parameterization of the airfoil upper and lower curves based on these control points.In order to directly enhance the lift-to-drag ratio of the airfoil at high angles of attack,the NSGA-II algorithm is utilized to optimize the lift-to-drag ratio of NACA 6904 at a=17.5°,Ma=0.43,Re=7600,and CLF 5605 at a=15°,Ma=0.7,Re=7481,respectively.The two-dimensional RANS(Reynolds Average NavierStokes)and k-ωSST turbulence models are employed in the optimization process by CFD to predict the lift and drag characteristics of the airfoil in a Martian environment.Under simulated Mars atmospheric conditions(pressure of 1380 Pa,test temperature of 24°C,equivalent Mars atmospheric density at the surface of 0.0162 g/cm~3),the airfoil after optimized is subjected to rotor lift-drag characteristic tests where a single-rotor lift-drag characteristic test bench is employed for verification.The experimental results demonstrate that the RB-TB-II blade,which is obtained by optimizing the airfoil based on the RB-SWQ-I blade,exhibits a 19.6%increase in Power Loading(PL)and a 20.4%increase in Figure of Merit(FM)compared with the RB-SWQ-I blade.Based on the results of airfoil optimization,increasing the camber at the leading edge of the airfoil under high angles of attack contributes to an improved lift-to-drag ratio.展开更多
基金co-supported by the Fund of Robot Technology Used for Special Environment Key Laboratory of Sichuan Province(No.22kftk01)the Key Research and Development Program of Heilongjiang,China(No.2024ZXJ07B05)the National Natural Science Foundation of China(No.92471103)。
文摘Unmanned aircraft are highly vulnerable to crosswind-induced turbulence during complex maneuvers such as turning,which can significantly compromise control and reduce autopilot effectiveness.This paper presents a novel control strategy to improve the controllability of unmanned aircraft in challenging wind conditions.First,the equations of motion for the aircraft are reformulated as a system of stochastic differential equations,which are subsequently transformed into a deterministic form.By modeling turbulence as a Gaussian random process and incorporating it directly into the control system,the proposed method proactively compensates for the adverse effects of turbulence.The transformation is achieved using semi-invariant techniques.Second,the control problem is formulated as an optimization task,aiming to minimize the deviation between the actual and desired turn characteristics,specifically the angular velocity.Finally,a new numerical method with proven global convergence is employed to compute the optimal autopilot parameters.Simulation results using a medium-range unmanned aircraft model under continuous turbulent gusts demonstrate that the proposed method significantly outperforms existing approaches,ensuring both stability and precision in turbulent wind conditions.
基金supported in part by the Research on Key Technologies for the Development of an Active Balancing Cooperative Control Systemfor Distribution Networks and the National Natural Science Foundation of China under Grant 521532240029,Grant 62303006.
文摘To address the high costs and operational instability of distribution networks caused by the large-scale integration of distributed energy resources(DERs)(such as photovoltaic(PV)systems,wind turbines(WT),and energy storage(ES)devices),and the increased grid load fluctuations and safety risks due to uncoordinated electric vehicles(EVs)charging,this paper proposes a novel dual-scale hierarchical collaborative optimization strategy.This strategy decouples system-level economic dispatch from distributed EV agent control,effectively solving the resource coordination conflicts arising from the high computational complexity,poor scalability of existing centralized optimization,or the reliance on local information decision-making in fully decentralized frameworks.At the lower level,an EV charging and discharging model with a hybrid discrete-continuous action space is established,and optimized using an improved Parameterized Deep Q-Network(PDQN)algorithm,which directly handles mode selection and power regulation while embedding physical constraints to ensure safety.At the upper level,microgrid(MG)operators adopt a dynamic pricing strategy optimized through Deep Reinforcement Learning(DRL)to maximize economic benefits and achieve peak-valley shaving.Simulation results show that the proposed strategy outperforms traditional methods,reducing the total operating cost of the MG by 21.6%,decreasing the peak-to-valley load difference by 33.7%,reducing the number of voltage limit violations by 88.9%,and lowering the average electricity cost for EV users by 15.2%.This method brings a win-win result for operators and users,providing a reliable and efficient scheduling solution for distribution networks with high renewable energy penetration rates.
基金the financial support for this work provided by the National Natural Science Foundation of China(51974087)Anhui Provincial Natural Science Foundation(1908085QE203)+1 种基金University Natural Science Research Foundation of Anhui Province(2022AH050262)Science Research Foundation of Anhui Jianzhu University(2020QDZ02).
文摘To further enhance the recovery rate of low-temperature waste heat,the low-temperature flue gas in the sinter annular cooler was chosen as the heat source of an organic Rankine cycle(ORC)system,and the comprehensive evaluation of energy,exergy and economic performance of the ORC system was conducted deeply.The energy,exergy and economic performance models of the ORC system were established,and proper candidate organic working fluids(OWFs)were selected based on the thermo-physical properties of OWF and operating characteristics of ORC system.Then,the effects of ORC crucial parameters on the system energy,exergy and economic performances were evaluated in detail.Finally,the bi-objective optimization based on the genetic algorithm was conducted to analyze the optimal performance of the ORC system under the designed ORC crucial parameters,and the exergy efficiency and electricity production cost were set as the evaluation indexes of parametric optimization.The results indicate that the ORC system with the higher evaporation temperature and lower condensation temperature can obtain the larger system exergy efficiency and smaller electricity production cost.The smaller the superheat degree of OWF and pinch-point temperature difference in the evaporator are,the better the energy and exergy performances of the ORC system are.Under the optimization results,R245fa has the best comprehensive performance with the exergy efficiency of 46.34%and electricity production cost of 0.12123$/kWh among the selected candidate OWFs,which should be preferentially chosen as the OWF of the ORC system.
基金supported in part by the National Defense Basic Scientific Research Program of China(No.JCKY2021603B030)the Shenzhen Fundamental Research Program,China(No.JCYJ20220818102601004)the Science Center Program of National Natural Science Foundation of China(No.62188101)。
文摘Rapid and reliable onboard optimization of bank angle profiles is crucial for mitigating uncertainties during Mars atmospheric entry.This paper presents a neural-network-accelerated methodology for optimizing parametric bank angle profiles in Mars atmospheric entry missions.The methodology includes a universal approach to handling path constraints and a reliable solution method based on the Particle Swarm Optimization(PSO)algorithm.For illustrative purposes,a mission with the objective of maximizing terminal altitude is considered.The original entry optimization problem is converted into optimizing three coefficients for the bank angle profiles with terminal constraints by formulating a parametric Mars entry bank angle profile and constraint handling methods.The parameter optimization problem is addressed using the PSO algorithm,with reliability enhanced by increasing the PSO swarm size.To improve computational efficiency,an enhanced Deep Operator Network(Deep ONet)is used as a dynamics solver to predict terminal states under various bank angle profiles rapidly.Numerical simulations demonstrate that the proposed methodology ensures reliable convergence with a sufficiently large PSO swarm while maintaining high computational efficiency facilitated by the neural-network-based dynamics solver.Compared to the existing methodologies,this methodology offers a streamlined process,the reduced sensitivity to initial guesses,and the improved computational efficiency.
基金Supported by the National Natural Science Foundation of China(12071133)Natural Science Foundation of Henan Province(252300421993)Key Scientific Research Project of Higher Education Institutions in Henan Province(25B110005)。
文摘In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.
基金the National Natural Science Foundation of China,grant numbers 51704253 and 52474084.
文摘The surface injection and production system(SIPS)is a critical component for effective injection and production processes in underground natural gas storage.As a vital channel,the rational design of the surface injection and production(SIP)pipeline significantly impacts efficiency.This paper focuses on the SIP pipeline and aims to minimize the investment costs of surface projects.An optimization model under harmonized injection and production conditions was constructed to transform the optimization problem of the SIP pipeline design parameters into a detailed analysis of the injection condition model and the production condition model.This paper proposes a hybrid genetic algorithm generalized reduced gradient(HGA-GRG)method,and compares it with the traditional genetic algorithm(GA)in a practical case study.The HGA-GRG demonstrated significant advantages in optimization outcomes,reducing the initial cost by 345.371×10^(4) CNY compared to the GA,validating the effectiveness of the model.By adjusting algorithm parameters,the optimal iterative results of the HGA-GRG were obtained,providing new research insights for the optimal design of a SIPS.
基金Supported by National Natural Science Foundation of China(Grant No.62506054)Natural Science Foundation of Chongqing,China(Grant Nos.CSTB2022NSCQ-MSX1571,CSTB2024NSCQ-MSX1118)+2 种基金the Science and Technology Research Program of Chongqing Municipal Education Commission(Grant Nos.KJQN202400841,KJZD-M202500804)The National Natural Science Foundation of China(Grant No.61976030)Chongqing Technology and Business University High-level Talent Research Initiation Project(Grant No.2256004).
文摘Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a systematic overview of recent advancements in metaheuristic algorithms and highlights their applications in e-Health.We selected representative algorithms published between 2019 and 2024,and quantified their influence using an entropy-weighted method based on journal impact factors and citation counts.CThe Harris Hawks Optimizer(HHO)demonstrated the highest early citation impact.The study also examined applications in disease prediction models,clinical decision support,and intelligent health monitoring.Notably,the Chaotic Salp Swarm Algorithm(CSSA)achieved 99.69% accuracy in detecting Novel Coronavirus Pneumonia.Future research should progress in three directions:improving theoretical reliability and performance predictability in medical contexts;designing more adaptive and deployable mechanisms for real-world systems;and integrating ethical,privacy,and technological considerations to enable precision medicine,digital twins,and intelligent medical devices.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
基金Supported by National Natural Science Foundation of China(Grant Nos.52202431,52172353).
文摘Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightweight of two distinct material characteristics.MFHTWTs can achieve energy absorption through the coupling of material plastic deformation and fracture,demonstrating significant engineering value in passive safety.This review provides a comprehensive examination of the crashworthiness topology optimization of MFHTWTs,aiming to demonstrate that a deeply integrated approach combining topology and parameter opti-mization can realize an optimal design method for MFHTWTs,thereby maximizing the functional utilization of limited material.Firstly,the review highlights the crashworthiness topology optimization methods(CTOMs)based on thin-walled structures.With a particular focus on metal,the review discusses both the practical ap-plicability and limitations of CTOMs under crash conditions.Additionally,based on the methodology of the equivalent static load method(ESLM),the review emphasizes that topology optimization methods considering continuous fiber paths and multi-material interface connections are also applicable to the crashworthiness op-timization of MFHTWTs.Furthermore,to couple structural parameters and configuration characteristics,in-tegrated topology optimization methods,including parameter optimization,are proposed to provide a valuable reference for the global optimization of MFHTWTs.Thus,these methods can establish the mapping relationship between key parameters and the structural energy absorption capacity.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
文摘Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.
基金appreciation to the Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R384)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.
基金funded by the Malaysian Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS/1/2024/ICT02/UCSI/02/1).
文摘Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金supported by Independent Innovation Science Foundation of National University of Defense Technology(Grant No.23-ZZCX-JDZ-44)。
文摘Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a laser energy output of 2.2 mJ at 10μm was obtained.By tuning the angle and temperature,a tunable laser output covering the wavelength range from 6μm to 17μm was obtained with a tuning precision better than 3 nm.The corresponding optical-to-optical conversion efficiency was 2.8%,and the slope efficiency was 4.4%.The damage effect of the output laser on detectors was also investigated,and point damage to the detector occurred at an output energy of 16.4μJ.The laser system has the advantages of miniaturization,a wide tuning range,high energy and high tuning resolution.Its broadband laser characteristics make it highly valuable for applications in atmospheric detection,infrared spectroscopy and electro-optical countermeasures.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
基金funded by Vale S.A.company(www.vale.com)and the Institute of Technology Vale(ITV—www.itv.org),grant number SAP 4600048682.
文摘The roller is one of the fundamental elements of ore belt conveyor systems since it supports,guides,and directs material on the belt.This component comprises a body(the external tube)that rotates around a fixed shaft supported by easels.The external tube and shaft of rollers used in ore conveyor belts are mostly made of steel,resulting in high mass,hindering maintenance and replacement.Aiming to achieve mass reduction,we conducted a structural optimization of a roller with a polymeric external tube(hereafter referred to as a polymeric roller),seeking the optimal values for two design parameters:the inner diameter of the external tube and the shaft diameter.The optimization was constrained by admissible values for maximum stress,maximum deflection and misalignment angle between the shaft and bearings.A finite element model was built in Ansys Workbench to obtain the structural response of the system.The roller considered is composed of an external tube made of high-density polyethylene(HDPE),bearing seats of polyamide 6(PA6),and a steel shaft.To characterize the polymeric materials(HDPE and PA6),stress relaxation tests were conducted,and the data on shear modulus variation over time were inserted into the model to calculate Prony series terms to account for viscoelastic effects.The roller optimization was performed using surrogate modeling based on radial basis functions,with the Globalized Bounded Nelder-Mead(GBNM)algorithm as the optimizer.Two optimization cases were conducted.In the first case,concerning the roller’s initial material settings,the designs found violated the constraints and could not reduce mass.In the second case,by using PA6 in both bearing seats and the tube,a design configuration was found that respected all constraints and reduced the roller mass by 15.5%,equivalent to 5.15 kg.This study is among the first to integrate experimentally obtained viscoelastic data into the surrogate-based optimization of polymeric rollers,combining methodological innovation with industrial relevance.
基金supported by the National Natural Science Foundation of China(Nos.62171204,62171129,62001192).
文摘We propose an optimization method based on evolutionary computation for the design of broadband high-efficiency current-biased reverse load-modulation power amplifiers(CB-RLM PAs).First,given the reverse load-modulation characteristics of CB-RLM PAs,a comprehensive objective function is proposed that combines multi-state impedance trajectory constraints with in-band performance deviations.For the saturation and 6 dB power back-off(PBO)states,approximately optimal impedance regions on the Smith chart are derived using impedance constraint circles based on load-pull simulations.These regions are used together with in-band performance deviations(e.g.,saturated efficiency,6 dB PBO efficiency,and saturated output power)for matching network optimization and design.Second,a multi-objective evolutionary algorithm based on decomposition with adaptive weights,neighborhood,and global replacement is integrated with harmonic balance simulations to optimize design parameters and evaluate performance.Finally,to validate the proposed method,a broadband CB-RLM PA operating from 0.6 to 1.8 GHz is designed and fabricated.Measurement results show that the efficiencies at saturation,6 dB PBO,and 8 dB PBO all exceed 43.6%,with saturated output power being maintained at 40.9–41.5 dBm,which confirms the feasibility and effectiveness of the proposed broadband high-efficiency CB-RLM PA optimization and design approach.
基金supported by the National Key R&D Program of China(No.2024YFC3015804)the Basic Science Center Program for“Space Robot Intelligent Manipulation”,China(No.T2388101)。
文摘Although the thin and cold Martian atmosphere provides the feasibility of rotorcraft flight on Mars,rotors designed for denser Earth atmosphere with small angles of attack hardly generate enough thrust for rotorcraft flight at conventional rotational speeds in the Martian atmosphere.In this paper,we employ the Particle Swarm Optimization(PSO)algorithm to search for the control points of the Bezier curve,completing the parameterization of the airfoil upper and lower curves based on these control points.In order to directly enhance the lift-to-drag ratio of the airfoil at high angles of attack,the NSGA-II algorithm is utilized to optimize the lift-to-drag ratio of NACA 6904 at a=17.5°,Ma=0.43,Re=7600,and CLF 5605 at a=15°,Ma=0.7,Re=7481,respectively.The two-dimensional RANS(Reynolds Average NavierStokes)and k-ωSST turbulence models are employed in the optimization process by CFD to predict the lift and drag characteristics of the airfoil in a Martian environment.Under simulated Mars atmospheric conditions(pressure of 1380 Pa,test temperature of 24°C,equivalent Mars atmospheric density at the surface of 0.0162 g/cm~3),the airfoil after optimized is subjected to rotor lift-drag characteristic tests where a single-rotor lift-drag characteristic test bench is employed for verification.The experimental results demonstrate that the RB-TB-II blade,which is obtained by optimizing the airfoil based on the RB-SWQ-I blade,exhibits a 19.6%increase in Power Loading(PL)and a 20.4%increase in Figure of Merit(FM)compared with the RB-SWQ-I blade.Based on the results of airfoil optimization,increasing the camber at the leading edge of the airfoil under high angles of attack contributes to an improved lift-to-drag ratio.
