Focusing on the networked control system with long time-delays and data packet dropout,the problem of observerbased fault detection of the system is studied.According to conditions of data arrival of the controller,th...Focusing on the networked control system with long time-delays and data packet dropout,the problem of observerbased fault detection of the system is studied.According to conditions of data arrival of the controller,the state observers of the system are designed to detect faults when they occur in the system.When the system is normal,the observers system is modeled as an uncertain switched system.Based on the model,stability condition of the whole system is given.When conditions are satisfied,the system is asymptotically stable.When a fault occurs,the observers residual can change rapidly to detect the fault.A numerical example shows the effectiveness of the proposed method.展开更多
In this paper, the stabilization problem for a class of networked control systems （NCSs） with data packet dropouts and transmission time delays is considered, where the delays are time-varying and uncertain, the dat...In this paper, the stabilization problem for a class of networked control systems （NCSs） with data packet dropouts and transmission time delays is considered, where the delays are time-varying and uncertain, the data packet dropout is modeled as a two-state Markov chain. To compensate the lost packet, a data packet dropout compensator is established. Thus a more realistic model for such NCSs is presented. Sufficient conditions for the stabilization of the new resulting system are derived in the form of linear matrix inequalities （LMIs）. Numerical example illustrates the solvability and effectiveness of the results.展开更多
Wireless Sensor Networks(WSNs) has become a popular research topic due to its resource constraints. Energy consumption and transmission delay is crucial requirement to be handled to enhance the popularity of WSNs. In ...Wireless Sensor Networks(WSNs) has become a popular research topic due to its resource constraints. Energy consumption and transmission delay is crucial requirement to be handled to enhance the popularity of WSNs. In order to overcome these issues, we have proposed an Efficient Packet Scheduling Technique for Data Merging in WSNs. Packet scheduling is done by using three levels of priority queue and to reduce the transmission delay. Real-time data packets are placed in high priority queue and Non real-time data packets based on local or remote data are placed on other queues. In this paper, we have used Time Division Multiple Access(TDMA) scheme to efficiently determine the priority of the packet at each level and transmit the data packets from lower level to higher level through intermediate nodes. To reduce the number of transmission, efficient data merge technique is used to merge the data packet in intermediate nodes which has same destination node. Data merge utilize the maximum packet size by appending the merged packets with received packets till the maximum packet size or maximum waiting time is reached. Real-time data packets are directly forwarded to the next node without applying data merge. The performance is evaluated under various metrics like packet delivery ratio, packet drop, energy consumption and delay based on changing the number of nodes and transmission rate. Our results show significant reduction in various performance metrics.展开更多
This paper addresses the stabilization problem for a class of nonlinear systems. It is assumed that the controller can only receive the transmitted sequence of finite coded signals via a limited digital communication ...This paper addresses the stabilization problem for a class of nonlinear systems. It is assumed that the controller can only receive the transmitted sequence of finite coded signals via a limited digital communication channel. Both state and output feedback coder-decoder-controller procedures are proposed. Stabilization conditions involving the size of coding alphabet, the sampling period, system state growth rate and data packet dropout rate are obtained. Finally, an example is given to illustrate the design procedures and effectiveness of the proposed results.展开更多
Parameter optimization of nodes communication is the foundation of underwater sensor networks.The packet size is an important indicator of the impact of communication performance.As a result,the optimal packet size se...Parameter optimization of nodes communication is the foundation of underwater sensor networks.The packet size is an important indicator of the impact of communication performance.As a result,the optimal packet size selection is a critical issue in improving the communication performance.This paper aims to make a model reflecting the communication characteristics as the optimization target,because underwater sensor networks have the characteristics of high time delay,high energy consumption and high bit error rate.Finally,simulation experiments and theory have demonstrated the effectiveness and timeliness of simultaneous perturbation stochastic approximation(SPSA) algorithm.展开更多
In this paper, we present a stochastic model for data in a Wireless Sensor Network (WSN) using random field theory. The model captures the space-time behavior of the underlying phenomenon being observed by the network...In this paper, we present a stochastic model for data in a Wireless Sensor Network (WSN) using random field theory. The model captures the space-time behavior of the underlying phenomenon being observed by the network. We present results regarding the size and spatial distribution of the regions of the network that sense statistically extreme values of the underlying phenomenon using the theory of extreme excursion regions. These results compliment many existing works in the literature that describe algorithms to reduce the data load, but lack an analytical approach to evaluate the size and spatial distribution of this load. We show that if only the statistically extreme data is transmitted in the network, then the data load can be significantly reduced. Finally, a simple performance model of a WSN is developed based on a collection of asynchronous M/M/1 servers that work in parallel. We derive several performance measures from this performance model. The presented results will be useful in the design of large scale sensor networks.展开更多
Over the last few years, the Internet of Things (IoT) has become an omnipresent term. The IoT expands the existing common concepts, anytime and anyplace to the connectivity for anything. The proliferation in IoT offer...Over the last few years, the Internet of Things (IoT) has become an omnipresent term. The IoT expands the existing common concepts, anytime and anyplace to the connectivity for anything. The proliferation in IoT offers opportunities but may also bear risks. A hitherto neglected aspect is the possible increase in power consumption as smart devices in IoT applications are expected to be reachable by other devices at all times. This implies that the device is consuming electrical energy even when it is not in use for its primary function. Many researchers’ communities have started addressing storage ability like cache memory of smart devices using the concept called—Named Data Networking (NDN) to achieve better energy efficient communication model. In NDN, memory or buffer overflow is the common challenge especially when internal memory of node exceeds its limit and data with highest degree of freshness may not be accommodated and entire scenarios behaves like a traditional network. In such case, Data Caching is not performed by intermediate nodes to guarantee highest degree of freshness. On the periodical updates sent from data producers, it is exceedingly demanded that data consumers must get up to date information at cost of lease energy. Consequently, there is challenge in maintaining tradeoff between freshness energy consumption during Publisher-Subscriber interaction. In our work, we proposed the architecture to overcome cache strategy issue by Smart Caching Algorithm for improvement in memory management and data freshness. The smart caching strategy updates the data at precise interval by keeping garbage data into consideration. It is also observed from experiment that data redundancy can be easily obtained by ignoring/dropping data packets for the information which is not of interest by other participating nodes in network, ultimately leading to optimizing tradeoff between freshness and energy required.展开更多
In this paper, we present a background and theory of the effect of Surface Acoustic Wave (SAW) Filter Module (SFM) in-band ripple on high data rate communications parameters such as the Error Vector Magnitude (EVM). I...In this paper, we present a background and theory of the effect of Surface Acoustic Wave (SAW) Filter Module (SFM) in-band ripple on high data rate communications parameters such as the Error Vector Magnitude (EVM). In addition, we present analyses and statements for the choice of unbalanced S-parameters set of the SFM over balanced S-parameters set of the SFM in measurements and Agilent’s Advance Design System (ADS) Ptolemy simulations. A test and measurement setup using Agilent’s equipment will be presented.展开更多
针对用户数据报协议(User Datagram Protocol,UDP)数据业务无法提供绝对的服务质量(Quality of Service,QoS)保证的特点,对数据丢包、接收乱序、业务抖动等常见传输异常类型进行了简要介绍,结合航天信息网络高实时性、高可靠性的特殊要...针对用户数据报协议(User Datagram Protocol,UDP)数据业务无法提供绝对的服务质量(Quality of Service,QoS)保证的特点,对数据丢包、接收乱序、业务抖动等常见传输异常类型进行了简要介绍,结合航天信息网络高实时性、高可靠性的特殊要求,分析了业务传输异常的常见原因,并分别针对设备工作异常、物理链路异常、网络传输异常等故障现象梳理了常用排查方法。在此基础上,针对单播UDP业务中断、指定源组播业务中断、数据接收乱序3类典型业务传输异常问题,详细设计了排查流程和处置措施,并从减少异常传输问题发生和提升故障定位处置能力两方面出发,对业务系统及网络设计提出了优化改进的策略建议。展开更多
基金supported by the Natural Science Foundation of Jiangsu Province (BK2006202)
文摘Focusing on the networked control system with long time-delays and data packet dropout,the problem of observerbased fault detection of the system is studied.According to conditions of data arrival of the controller,the state observers of the system are designed to detect faults when they occur in the system.When the system is normal,the observers system is modeled as an uncertain switched system.Based on the model,stability condition of the whole system is given.When conditions are satisfied,the system is asymptotically stable.When a fault occurs,the observers residual can change rapidly to detect the fault.A numerical example shows the effectiveness of the proposed method.
基金The work was supported in part by the National Natural Science Foundation of China (No. 60174010, 60404022)the Key Scientific ResearchProject of the Education Ministry (No. 204014)
文摘In this paper, the stabilization problem for a class of networked control systems （NCSs） with data packet dropouts and transmission time delays is considered, where the delays are time-varying and uncertain, the data packet dropout is modeled as a two-state Markov chain. To compensate the lost packet, a data packet dropout compensator is established. Thus a more realistic model for such NCSs is presented. Sufficient conditions for the stabilization of the new resulting system are derived in the form of linear matrix inequalities （LMIs）. Numerical example illustrates the solvability and effectiveness of the results.
文摘Wireless Sensor Networks(WSNs) has become a popular research topic due to its resource constraints. Energy consumption and transmission delay is crucial requirement to be handled to enhance the popularity of WSNs. In order to overcome these issues, we have proposed an Efficient Packet Scheduling Technique for Data Merging in WSNs. Packet scheduling is done by using three levels of priority queue and to reduce the transmission delay. Real-time data packets are placed in high priority queue and Non real-time data packets based on local or remote data are placed on other queues. In this paper, we have used Time Division Multiple Access(TDMA) scheme to efficiently determine the priority of the packet at each level and transmit the data packets from lower level to higher level through intermediate nodes. To reduce the number of transmission, efficient data merge technique is used to merge the data packet in intermediate nodes which has same destination node. Data merge utilize the maximum packet size by appending the merged packets with received packets till the maximum packet size or maximum waiting time is reached. Real-time data packets are directly forwarded to the next node without applying data merge. The performance is evaluated under various metrics like packet delivery ratio, packet drop, energy consumption and delay based on changing the number of nodes and transmission rate. Our results show significant reduction in various performance metrics.
基金supported by the National Natural Science Foundation of China(No.60874021,60974016)the National Natural Science Foundation of Jiangsu Province(No.BK2007061)Qing Lan Project from the Jiangsu Provincial Department for Education and the National Natural Science Foundation of Nantong University(No.08Z001)
文摘This paper addresses the stabilization problem for a class of nonlinear systems. It is assumed that the controller can only receive the transmitted sequence of finite coded signals via a limited digital communication channel. Both state and output feedback coder-decoder-controller procedures are proposed. Stabilization conditions involving the size of coding alphabet, the sampling period, system state growth rate and data packet dropout rate are obtained. Finally, an example is given to illustrate the design procedures and effectiveness of the proposed results.
文摘Parameter optimization of nodes communication is the foundation of underwater sensor networks.The packet size is an important indicator of the impact of communication performance.As a result,the optimal packet size selection is a critical issue in improving the communication performance.This paper aims to make a model reflecting the communication characteristics as the optimization target,because underwater sensor networks have the characteristics of high time delay,high energy consumption and high bit error rate.Finally,simulation experiments and theory have demonstrated the effectiveness and timeliness of simultaneous perturbation stochastic approximation(SPSA) algorithm.
文摘In this paper, we present a stochastic model for data in a Wireless Sensor Network (WSN) using random field theory. The model captures the space-time behavior of the underlying phenomenon being observed by the network. We present results regarding the size and spatial distribution of the regions of the network that sense statistically extreme values of the underlying phenomenon using the theory of extreme excursion regions. These results compliment many existing works in the literature that describe algorithms to reduce the data load, but lack an analytical approach to evaluate the size and spatial distribution of this load. We show that if only the statistically extreme data is transmitted in the network, then the data load can be significantly reduced. Finally, a simple performance model of a WSN is developed based on a collection of asynchronous M/M/1 servers that work in parallel. We derive several performance measures from this performance model. The presented results will be useful in the design of large scale sensor networks.
文摘Over the last few years, the Internet of Things (IoT) has become an omnipresent term. The IoT expands the existing common concepts, anytime and anyplace to the connectivity for anything. The proliferation in IoT offers opportunities but may also bear risks. A hitherto neglected aspect is the possible increase in power consumption as smart devices in IoT applications are expected to be reachable by other devices at all times. This implies that the device is consuming electrical energy even when it is not in use for its primary function. Many researchers’ communities have started addressing storage ability like cache memory of smart devices using the concept called—Named Data Networking (NDN) to achieve better energy efficient communication model. In NDN, memory or buffer overflow is the common challenge especially when internal memory of node exceeds its limit and data with highest degree of freshness may not be accommodated and entire scenarios behaves like a traditional network. In such case, Data Caching is not performed by intermediate nodes to guarantee highest degree of freshness. On the periodical updates sent from data producers, it is exceedingly demanded that data consumers must get up to date information at cost of lease energy. Consequently, there is challenge in maintaining tradeoff between freshness energy consumption during Publisher-Subscriber interaction. In our work, we proposed the architecture to overcome cache strategy issue by Smart Caching Algorithm for improvement in memory management and data freshness. The smart caching strategy updates the data at precise interval by keeping garbage data into consideration. It is also observed from experiment that data redundancy can be easily obtained by ignoring/dropping data packets for the information which is not of interest by other participating nodes in network, ultimately leading to optimizing tradeoff between freshness and energy required.
文摘In this paper, we present a background and theory of the effect of Surface Acoustic Wave (SAW) Filter Module (SFM) in-band ripple on high data rate communications parameters such as the Error Vector Magnitude (EVM). In addition, we present analyses and statements for the choice of unbalanced S-parameters set of the SFM over balanced S-parameters set of the SFM in measurements and Agilent’s Advance Design System (ADS) Ptolemy simulations. A test and measurement setup using Agilent’s equipment will be presented.
文摘针对用户数据报协议(User Datagram Protocol,UDP)数据业务无法提供绝对的服务质量(Quality of Service,QoS)保证的特点,对数据丢包、接收乱序、业务抖动等常见传输异常类型进行了简要介绍,结合航天信息网络高实时性、高可靠性的特殊要求,分析了业务传输异常的常见原因,并分别针对设备工作异常、物理链路异常、网络传输异常等故障现象梳理了常用排查方法。在此基础上,针对单播UDP业务中断、指定源组播业务中断、数据接收乱序3类典型业务传输异常问题,详细设计了排查流程和处置措施,并从减少异常传输问题发生和提升故障定位处置能力两方面出发,对业务系统及网络设计提出了优化改进的策略建议。
