The oxidative dehydrogenation (ODH) reactions of ethane and propane were investigated in a catalytic membrane reactor, incorporating oxygen-permeable membranes based upon La2Ni0.9V0.1O4+δor Ba0.5Sr0.5Co0.8Fe0.2O3-...The oxidative dehydrogenation (ODH) reactions of ethane and propane were investigated in a catalytic membrane reactor, incorporating oxygen-permeable membranes based upon La2Ni0.9V0.1O4+δor Ba0.5Sr0.5Co0.8Fe0.2O3-δ. As a compromise between the occurrence of a measureable oxygen flux and excessive homogenous gas phase reactions, the measurements were conducted at an intermediate temperature, either at 550 or 650 oC. The results show the dominating role of the oxygen flux across the membrane and available sites at the membrane surface in primary activation of the alkane and, hence, in achieving high alkane conversions. The experimental data of ODH of propane and ethane on both membrane materials can be reconciled on the basis of Mars-van Krevelen mechanism, in which the alkane reacts with lattice oxygen on the membrane surface to produce the corresponding olefin. It is further demonstrated that the oxygen concentration in the gas phase and on the membrane surface is crucial for determining the olefin selectivity.展开更多
Perovskite-type oxygen-permeable membrane reactors of BaCo0.7Fe0.2Nb0.1O3-δ (BCFNO) packed with Ru-based catalyst had high oxygen permeability and could be used for hydrogen production by partial oxidation of metha...Perovskite-type oxygen-permeable membrane reactors of BaCo0.7Fe0.2Nb0.1O3-δ (BCFNO) packed with Ru-based catalyst had high oxygen permeability and could be used for hydrogen production by partial oxidation of methane in coke oven gas (COG). At 1173 K, 94% of methane conversion, 85% of H2 selectivity, 107% of CO selectivity, and as high as 15.4 mL·cm^-2·min^-1 of oxygen permeation flux were obtained. The BCFNO membrane itself had poor catalytic activity to partial oxidation of CH4 in COG. During continuous operation for 70 h at 1173 K, no degradation of the membrane reaction performance was observed. XRD and SEM characterization also demonstrated that the BCFNO membrane reactor exhibited good stability in partial oxidation of methane in COG.展开更多
A gas-tight BaCo 0.7 Fe 0.2 Nb 0.1 O 3-δ(BCFNO) tubular membrane was fabricated by hot pressure casting.And a membrane reactor with BCFNO tubular membrane and Ag-based sealant was readily constructed and applied to...A gas-tight BaCo 0.7 Fe 0.2 Nb 0.1 O 3-δ(BCFNO) tubular membrane was fabricated by hot pressure casting.And a membrane reactor with BCFNO tubular membrane and Ag-based sealant was readily constructed and applied to partial oxidation of CH4 in coke oven gas.At 875 ℃,95% of methane conversion,91% of H 2 and as high as 10 ml cm-2·min-1 of oxygen permeation flux were obtained.There was a good match in the coefficient of thermal expansion between Ag-based alloy and BCFNO membrane materials.The tubular BCFNO membrane reactor packed with Ni-based catalysts exhibited not only high activity but also good stability in hydrogen-enriched coke oven gas(COG) atmosphere.展开更多
Recently the CAS Qingdao Institute of Bioenergy and Processes in collaboration with the Leibniz Universit?t Hannover,Forschungszentrum Jülich and Bayer AG has made attempts to carry out methane aromatization reac...Recently the CAS Qingdao Institute of Bioenergy and Processes in collaboration with the Leibniz Universit?t Hannover,Forschungszentrum Jülich and Bayer AG has made attempts to carry out methane aromatization reaction in an oxygen-permeable membrane reactor to展开更多
Proton exchange membrane fuel cells(PEMFCs)are considered as a promising renewable power source.However,the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied p...Proton exchange membrane fuel cells(PEMFCs)are considered as a promising renewable power source.However,the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction(ORR)kinetics even on state-of-the-art Pt catalyst.Octahedral PtNi nanoparticles(oct-PtNi NPs)with excellent ORR activity in a half-cell have been widely studied,while their performance in membrane electrode assembly(MEA)has much less reported.Herein,we investigated the MEA performance using the carbon supported oct-PtNi NPs(oct-PtNi/C)as the cathode catalyst.Under the mild acid washing condition,the surface Ni atoms of oct-PtNi/C were largely removed,and the performance of the MEA using the acid-leaching oct-PtNi/C(PNC-A)as the cathode catalyst was greatly improved.The maximum power density of the MEA reached 1.0 W·cm^(-2) with the cath-ode Pt loading of 0.2 mg·cm^(-2),which is 15%higher than that using Pt/C as the catalyst.After 30k cycles in the accelerated degradation test(ADT),the MEA using PNC-A as the catalyst showed a performance retention of 82%,higher than that of Pt/C(74%).The results reported here verify the possibility of using PNC-A as an advanced cathode catalyst in PEMFCs,thus enhancing the performance of PEMFCs while lowering the amount of expensive Pt.展开更多
Ion-solvaing membranes(ISMs)have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices.This article provides an overview of structural composition,per...Ion-solvaing membranes(ISMs)have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices.This article provides an overview of structural composition,performance advan-tages,research progress,ion conduction mechanism and existing issues of ISMs,primarily classifying them according to the matrix structure.A detailed analysis of performance enhancement methods,key performance indicators of ISMs and performance influencing factors is also presented.The article contributes to further optimizing the design and application of ion-solvation membranes,providing theoretical support for the development of fields such as hydrogen production through electrolysis of water and electrochemical energy in the future.展开更多
Diabetic wounds present challenges in clinical management due to persistent inflammation caused by excessive exudate infiltration.Inspired by the gradient wettability of cactus thorn,this study has devised a biomimeti...Diabetic wounds present challenges in clinical management due to persistent inflammation caused by excessive exudate infiltration.Inspired by the gradient wettability of cactus thorn,this study has devised a biomimetic Janus nanofiber membrane as a water diode,which endows with gradient wettability and gradient pore size,offering sustainable unidirectional self-drainage and antibacterial properties for enhanced diabetic wound healing.The Janus membrane is fabricated by depositing a hydrophilic polyacrylonitrile/chlorin e6 layer with smaller pore sizes onto a hydrophobic poly(ε-caprolactone)with larger pore sizes,thereby generating a vertical gradient in both wettability and pore structure.The incorporation of chlorin e6 in the upper layer enables the utilization of external light energy to generate heat for evaporation and produce reactive oxygen species,achieving a high sterilization efficiency of 99%.Meanwhile,the gradient structure of the Janus membrane facilitates continuous antigravity exudate drainage at a rate of 0.95 g cm^(−2) h^(−1).This dual functionality of effective exudate drainage and sterilization significantly reduces inflammatory factors,allows the polarization of macrophages toward the M2 proliferative phenotype,enhances angiogenesis,and accelerates wound healing.Therefore,this study provides a groundbreaking bioinspired strategy for the development of advanced wound dressings tailored for diabetic wound regeneration.展开更多
Membrane distillation(MD)is an advanced membrane separation process that employs hydrophobic microporous membranes to sepa rate non-volatile solutes from the feed solution,driven by vapor pressure gradients generated ...Membrane distillation(MD)is an advanced membrane separation process that employs hydrophobic microporous membranes to sepa rate non-volatile solutes from the feed solution,driven by vapor pressure gradients generated through thermal difference.This technology offers strong desalination capabilities and efficiently harnesses low-grade thermal energy sources,including geothermal and waste heat,making it a cost-effective solution for freshwater scarcity.Nevertheless,hydrophobic membranes are prone to contamination by surfactants,inorganic salts,and other substances in feed solutions.To address this,low-surface-energy composite nano-inorganic materials composed of carbon nanotubes and silica were modified and synthesized via organosilicon chemistry.A superhydrophobic surface exhibiting a water contact angle of157.96°was successfully fabricated using above nano-materials on poly(vinylidene fluoride)(PVDF)membrane surface with micro-nano structures via a one-step spray-coating method.Compared to unmodified PVDF membra ne,the superhydrophobic membrane demonstrated superior resistance to common scaling agents such as CaCl_(2),Mg(OH)_(2),CaCO_(3),and CaSO_(4),while maintaining stable permeate flux(13.4 kg·m^(-2)·h^(-1))during MD tests.Additionally,the modified membra ne exhibited enhanced wetting resistance when treating feed solutions containing sodium dodecyl sulfate(SDS),significantly extending the operational lifespan of the membrane.Due to its outstanding performance,this superhydrophobic membrane is expected to promote the practical application of MD technology in the treatment of complex wa stewater and efficient seawater desalination.展开更多
Abstract:Graphene-Based separation membranes hold promise for water treatment.However,their practical deployment in high-salinity brines remains challenging due to structural instability.Herein,a defect-free Na^(+)-Cu...Abstract:Graphene-Based separation membranes hold promise for water treatment.However,their practical deployment in high-salinity brines remains challenging due to structural instability.Herein,a defect-free Na^(+)-Cu^(2+)/GO-PEI nanocomposite membrane was fabricated via a pH-controlled cross-linking polymerization strategy.Polyethyleneimine(PEI)serves as a critical interfacial stabilizer,enhancing the connection between the Na^(+)-GO and Cu^(2+)-GO layers through amide bond formation with GO nanosheets while facilitating Cu^(2+)chelation.The Na^(+)/GO layer modifies the pore structure of the polyether sulfone(PES)substrate,synergistically optimizing the membrane’s microstructure.Performances evaluation revealed that the as-prepared membrane achieved exceptional separation efficiency(>98%)for tributyl phosphate,sulfonated kerosene,and bis(2-ethylhexyl)phosphate in high-salinity brine,accompanied by a high flux of 160~224 L·m^(-2)·h^(-1).Notably,it exhibited robust chemical stability in corrosive environment and maintained mechanical durability after 500 folding cycles coupled with consistent separation performances over 10 recycles.This study presents a novel multi-component modification approach for constructing high-performance GObased membrane,promising practical applications in organic pollutant removal from high salt solution.展开更多
Nanofiltration(NF) technology,with its capacity for nanoscale filtration and controllable selectivity,holds significant promise in diverse applications.However,the current upper bound of permeance and selectivity of N...Nanofiltration(NF) technology,with its capacity for nanoscale filtration and controllable selectivity,holds significant promise in diverse applications.However,the current upper bound of permeance and selectivity of NF membranes is intrinsically constrained by the morphology and structure of the polyamide(PA) selective layer.This issue arises because NF membranes typically exhibit relatively smooth nodular structures,which theoretically impede efficient water transport.In this study,we enhanced the formation of nanobubbles by synergistically regulating with surfactant and low temperatures,resulting in the fabrication of PA NF membranes with a crumpled morphology.We observed that lower temperatures promote enhanced gas solubility in the aqueous phase,facilitating increased nanobubble formation through the foaming effect of surfactant sodium dodecylbenzene sulfonate(SDBS).Consequently,this resulted in the creation of PA NF membranes with more crumpled structures and superior performance,with pure water permeance reaching 36.25 ± 0.42 L m^(-2)h^(-1)bar^(-1),representing an improvement of 14.47 L m^(-2)h^(-1)bar^(-1)compared to the control group.Additionally,it maintains a high Na_(2)SO_(4) rejection rate of97.00 % ± 0.58 %.The PA NF membranes produced by eliminating nanobubbles and free interfaces exhibited a smooth structure,whereas introducing nanobubbles(through Na HCO_(3) addition,N_(2) pressurization,and ultrasonication) resulted in the formation of crumpled membranes.This emphasized that the large amount of nanobubbles generated by SDBS and low temperature in the interfacial process played a critical role in shaping crumpled PA NF membranes and enhancing membrane performance.This approach has the potential to provide valuable insights into customizing the structural design of TFC PA NF membranes,contributing to further advancements in this field.展开更多
We successfully incorporated phenyl groups into a small-molecule quaternary ammonium cross-linker and synthesized cross-linked polybenzimidazole membranes via a one-step cross-linking process.Compared with conventiona...We successfully incorporated phenyl groups into a small-molecule quaternary ammonium cross-linker and synthesized cross-linked polybenzimidazole membranes via a one-step cross-linking process.Compared with conventional quaternary ammonium-crosslinked benzimidazole membranes,the introduction of phenyl groups significantly increases the free volume within the membrane.After phosphoric acid doping,the benzimidazole membrane with larger free volume retains more phosphoric acid compared to conventional quaternary ammonium-crosslinked membranes,forming an extensive hydrogen-bonding network that effectively enhances its anhydrous proton conductivity.The anhydrous proton conductivity reaches 91 mS·cm^(-1)at 160℃,substantially higher than that of conventional quaternary ammonium-crosslinked membranes with the same mass fraction.Benefiting from the improved conductivity,the membrane electrode assembly exhibits reduced ohmic polarization,achieving a peak power density of 792 mW·cm^(-2)at 160℃.展开更多
Covalent organic framework ionomers enable synergistic efficient transport of protons and oxygen in medium-temperature proton exchange membrane fuel cells Proton exchange membrane fuel cells(PEMFCs),as clean and effic...Covalent organic framework ionomers enable synergistic efficient transport of protons and oxygen in medium-temperature proton exchange membrane fuel cells Proton exchange membrane fuel cells(PEMFCs),as clean and efficient energy technologies,are constrained in their performance enhancement by the sluggish oxygen reduction reaction(ORR)kinetics at the cathode,anode CO poisoning(e.g.,from methanol crossover)and intricate water management dilemmas[1].展开更多
To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocom...To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocompatibility,were prepared using the process of vapor-induced phase separation at various PVDF concentrations.The results demonstrated that at a PVDF mass concentration of 14%,the membrane had increased surface roughness,significantly enhanced hydrophilicity and wettability,and a wetting time of 8 s.The surface roughness of the membrane was also reduced to 31.637 nm.Furthermore,hemolysis rate and protein adsorption tests indicated that the blended membranes possessed excellent biocompatibility.They were reduced to 2.48%and 34.44μg·cm^(−2),respectively.The pore size of the fabricated membrane was relatively large,which reached approximately 8μm respectively,satisfying the filtration requirements.Lastly,the effects of different temperatures and multi-layered filters on leukocyte removal and the retention of red blood cells and platelets from whole blood were evaluated.The results revealed that the leukocyte removal rate was highest at 4℃ and with three membrane layers,the leukocyte removal rate was highest,reaching 98.36%,while the RBC and platelet content remained nearly unchanged compared with the original blood.This study provides a new approach for blood cell separation that is expected to play a significant role in medical fields such as blood transfusion demonstrating great potential for application and innovation.展开更多
Proton exchange membranes(PEMs)play a central role in determining the efficiency,durability,and operational flexibility of PEM fuel cells(PEMFCs).However,conventional PEMs exhibit strong temperature-dependent proton-t...Proton exchange membranes(PEMs)play a central role in determining the efficiency,durability,and operational flexibility of PEM fuel cells(PEMFCs).However,conventional PEMs exhibit strong temperature-dependent proton-transport behavior,which limits their ability to support both rapid start-up at low temperatures and stable operation at elevated temperatures.Water-mediated PEMs show excellent conductivity under low-temperature and high-humidity conditions but suffer from dehydration and structural instability in the high-temperature regime.In contrast,water-independent PEMs,particularly phosphoric-acid-doped systems,conduct protons efficiently under anhydrous high-temperature conditions yet experience acid leaching that hampers room-temperature start-up and long-term durability.This review summarizes the fundamental proton-transport mechanisms that govern temperature-dependent performance and discusses recent advances in materials design aimed at enabling wide-temperature-range PEM operation.For water-mediated membranes,strategies such as incorporating hydrophilic fillers,constructing confined hydrophilic domains,and introducing additional proton-transfer sites have been developed to mitigate water loss and stabilize proton conduction.For water-independent membranes,approaches including strengthening polymer–acid interactions,engineering nanoscale confinement,designing multilayer architectures,and constructing multi–proton-carrier networks effectively improve acid retention and broaden operational temperature windows.Emerging fixed-carrier systems based on phosphonic-acid-grafted polymers,metal–organic frameworks,and covalent organic frameworks offer new pathways for stable anhydrous proton conduction across a wide temperature range.We conclude by outlining key challenges and future research opportunities,including reducing the dependence on volatile or leachable proton carriers,developing adaptive nanochannel architectures,improving anhydrous high-temperature conduction,and establishing scalable membrane fabrication methods.Continued innovation in these directions is expected to enable next-generation wide-temperature-range PEMs capable of flexible,high-efficiency operation from sub-zero to high-temperature conditions.展开更多
AIM:To assess risk factors for epiretinal membranes(ERM)and examine their interactions in a nationally representative U.S.dataset.METHODS:Data from the 2005–2008 National Health and Nutrition Examination Survey(NHANE...AIM:To assess risk factors for epiretinal membranes(ERM)and examine their interactions in a nationally representative U.S.dataset.METHODS:Data from the 2005–2008 National Health and Nutrition Examination Survey(NHANES)were analyzed,a nationally representative U.S.dataset.ERM was identified via retinal imaging based on the presence of cellophane changes.Key predictors included age group,eye surgery history,and refractive error,with additional demographic and health-related covariates.Weighted univariate and multiple logistic regression models were used to assess associations and interaction effects between eye surgery and refractive error.RESULTS:Totally 3925 participants were analyzed.Older age,eye surgery,and refractive errors were significantly associated with ERM.Compared to those under 65y,the odds ratio(OR)for ERM was 3.08 for ages 65–75y(P=0.0014)and 4.76 for ages 75+years(P=0.0069).Eye surgery increased ERM risk(OR=3.48,P=0.0018).Moderate to high hyperopia and myopia were also associated with ERM(OR=2.65 and 1.80,respectively).A significant interaction between refractive error and eye surgery was observed(P<0.0001).Moderate to high myopia was associated with ERM only in those without eye surgery(OR=1.92,P=0.0443).Eye surgery was most strongly associated with ERM in the emmetropic group(OR=3.60,P=0.0027),followed by the moderate to high myopia group(OR=3.01,P=0.0031).CONCLUSION:ERM is significantly associated with aging,eye surgery,and refractive errors.The interaction between eye surgery and refractive error modifies ERM risk and highlights the importance of considering combined effects in clinical risk assessments.These findings may help guide individualized ERM risk assessment that may inform personalized approaches to ERM prevention and management.展开更多
Due to complex ion-ion and ion-membrane interactions, creating innovative membrane structures to acquire favorable ion mixing effect and high separation performance remains a big challenge. Herein, we design covalent ...Due to complex ion-ion and ion-membrane interactions, creating innovative membrane structures to acquire favorable ion mixing effect and high separation performance remains a big challenge. Herein, we design covalent organic framework(COF) scaffold membrane with gate-lane nanostructure for efficient Li^(+)/Mg^(2+) separation. COF nanosheets, serving as the scaffold, are intercalated by polyethyleneimine(PEI) to form the permeating layer. Subsequently, PEI on the surface reacts with 1,4-phenylene diisocyanate to form the polyurea gating layer. The gating layer, bearing tailored smaller pore size,affords high rejection to co-ions(Mg^(2+)) and thus high Li^(+)/Mg^(2+) selectivity. The permeating layer, with asymmetric charge and spatial nanostructure for creating individual lanes of Li^(+) and Cl~-, facilitates Li^(+) transport and thus high Li^(+) permeability. The optimum COF scaffold membrane exhibits the permeance of 11.5 L m^(-2) h^(-1)/bar^(-1) and true selectivity of 231.9 with Li^(+) enrichment of 120.2% at the Mg^(2+)/Li^(+) mass ratio of 50, exceeding the ideal selectivity of 80.5 and outperforming all ever-reported positively charged nanofiltration membranes. Our work may stimulate the further thinking about how to design the hierarchical membrane structure to achieve favorable ion mixing effect and break the membrane permeability-selectivity trade-off in chemical separations.展开更多
The global burden of bacterial infections,exacerbated by antimicrobial resistance(AMR),necessitates innovative strategies.Bacterial protein vaccines offer promise by eliciting targeted immunity while circumventing AMR...The global burden of bacterial infections,exacerbated by antimicrobial resistance(AMR),necessitates innovative strategies.Bacterial protein vaccines offer promise by eliciting targeted immunity while circumventing AMR.However,their clinical translation is hindered by their inherently low immunogenicity,often requiring potent adjuvants and advanced delivery systems.Biomembrane nanostructures(e.g.,liposomes,exosomes,and cell membrane-derived nanostructures),characterized by superior biocompatibility,intrinsic targeting ability,and immune-modulating properties,could serve as versatile platforms that potentiate vaccine efficacy by increasing antigen stability,enabling codelivery of immunostimulants,and facilitating targeted delivery to lymphoid tissues/antigen-presenting cells.This intrinsic immunomodulation promotes robust humoral and cellular immune responses to combat bacteria.This review critically reviews(1)key biomembrane nanostructure classes for bacterial protein antigens,(2)design strategies leveraging biomembrane nanostructures to enhance humoral and cellular immune responses,(3)preclinical efficacy against diverse pathogens,and(4)translational challenges and prospects.Biomembrane nanostructure-driven approaches represent a paradigm shift in the development of next-generation bacterial protein vaccines against resistant infections.展开更多
An analytical model of a floating heaving box integrated with a vertical flexible porous membrane placed right next to the box applications to wave energy extraction and breakwater systems is developed under the reduc...An analytical model of a floating heaving box integrated with a vertical flexible porous membrane placed right next to the box applications to wave energy extraction and breakwater systems is developed under the reduced wave equation.The theoretical solutions for the heave radiating potential to the assigned physical model in the corresponding zones are attained by using the separation of variables approach along with the Fourier expansion.Applying the matching eigenfunction expansion technique and orthogonal conditions,the unknown coefficients that are involved in the radiated potentials are determined.The attained radiation potential allows the computation of hydrodynamic coefficients of the heaving buoy,Power Take-Off damping,and wave quantities.The accuracy of the analytical solution for the hydrodynamic coefficients is demonstrated for different oblique angles with varying numbers of terms in the series solution.The current analytical analysis findings are confirmed by existing published numerical boundary element method simulations.Several numerical results of the hydrodynamic coefficients,power capture,power take-off optimal damping,and transmission coefficients for numerous structural and physical aspects are conducted.It has been noted that the ideal power take-off damping increases as the angle of incidence rises,and the analysis suggests that the ability to capture waves is more effective in shallower waters compared to deeper ones.展开更多
Solid polymer electrolytes(SPEs)are considered promising candidates for all-solid-state lithium metal batteries because of their easy preparation and good compatibility with lithium metal.However,their applications ar...Solid polymer electrolytes(SPEs)are considered promising candidates for all-solid-state lithium metal batteries because of their easy preparation and good compatibility with lithium metal.However,their applications are restricted by their low ionic conductivity and poor mechanical properties.In this study,a composite solid polymer electrolyte composed of poly(ethylene oxide)(PEO),poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP),plasticizer succinonitrile(SN),and polytetrafluoroethylene(PTFE)fibrous porous membranes was prepared.The PTFE fibrous membrane significantly enhanced the mechanical strength of the electrolyte as a supporting framework.SN reduced the crystalline regions of PEO and facilitated rapid lithium-ion transport.PVDF-HFP promoted lithium salt dissolution and improved the electrochemical stability of the electrolyte.Accordingly,the optimized PTFE/PEO/PVDF-HFP/SN polymer electrolyte exhibited a tensile strength of 3.31 MPa at 352%elongation and demonstrated an ionic conductivity of 7.6×10^(-4)S·cm^(-1)at 60℃.Lithium symmetric cells maintained stable cycling for over 2500 h at 0.15 m A·cm^(-2),and Li//Li Fe PO_(4) full cells showed a high capacity retention of 91.6%after 300 cycles at 0.5 C,with coulombic efficiency consistently exceeding 99.9%throughout cycling.展开更多
Objective:To explore the therapeutic effect of double-puncture tympanic membrane puncture and tympanic cavity drug injection in patients with acute secretory otitis media.Methods:A total of 84 patients with acute secr...Objective:To explore the therapeutic effect of double-puncture tympanic membrane puncture and tympanic cavity drug injection in patients with acute secretory otitis media.Methods:A total of 84 patients with acute secretory otitis media admitted to our hospital from June 2024 to June 2025 were selected and randomly divided into two groups by drawing lots.The control group(42 cases)was treated with the traditional single-puncture tympanic membrane puncture and tympanic cavity drug injection method,while the observation group(42 cases)was treated with the double-puncture tympanic membrane puncture and tympanic cavity drug injection method.The therapeutic effects of the two groups were compared.Results:The overall treatment response rate,overall complication rate,time to symptom relief,and improvement in hearing threshold in the observation group were all superior to those in the control group,with statistically significant differences(P<0.05).Conclusion:For acute secretory otitis media,the treatment method of double-puncture tympanic membrane puncture and tympanic cavity drug injection demonstrates definite efficacy,significantly reducing the incidence of complications,accelerating symptom relief,and improving hearing function,making it worthy of promotion.展开更多
文摘The oxidative dehydrogenation (ODH) reactions of ethane and propane were investigated in a catalytic membrane reactor, incorporating oxygen-permeable membranes based upon La2Ni0.9V0.1O4+δor Ba0.5Sr0.5Co0.8Fe0.2O3-δ. As a compromise between the occurrence of a measureable oxygen flux and excessive homogenous gas phase reactions, the measurements were conducted at an intermediate temperature, either at 550 or 650 oC. The results show the dominating role of the oxygen flux across the membrane and available sites at the membrane surface in primary activation of the alkane and, hence, in achieving high alkane conversions. The experimental data of ODH of propane and ethane on both membrane materials can be reconciled on the basis of Mars-van Krevelen mechanism, in which the alkane reacts with lattice oxygen on the membrane surface to produce the corresponding olefin. It is further demonstrated that the oxygen concentration in the gas phase and on the membrane surface is crucial for determining the olefin selectivity.
基金supported by the National High-Tech Research and Development Program of China (No. 2006AA11A189)the Research on Novel Technology of Hydrogen Production from Oven Gas from Metallurgy Process (No. 07DZ12036)the National Key Technolo-gies Research and Development Program of China (No. 2006BA103A05)
文摘Perovskite-type oxygen-permeable membrane reactors of BaCo0.7Fe0.2Nb0.1O3-δ (BCFNO) packed with Ru-based catalyst had high oxygen permeability and could be used for hydrogen production by partial oxidation of methane in coke oven gas (COG). At 1173 K, 94% of methane conversion, 85% of H2 selectivity, 107% of CO selectivity, and as high as 15.4 mL·cm^-2·min^-1 of oxygen permeation flux were obtained. The BCFNO membrane itself had poor catalytic activity to partial oxidation of CH4 in COG. During continuous operation for 70 h at 1173 K, no degradation of the membrane reaction performance was observed. XRD and SEM characterization also demonstrated that the BCFNO membrane reactor exhibited good stability in partial oxidation of methane in COG.
基金supported by the National High Technology Research and Development Program of China (Project No. 2006AA11A189)
文摘A gas-tight BaCo 0.7 Fe 0.2 Nb 0.1 O 3-δ(BCFNO) tubular membrane was fabricated by hot pressure casting.And a membrane reactor with BCFNO tubular membrane and Ag-based sealant was readily constructed and applied to partial oxidation of CH4 in coke oven gas.At 875 ℃,95% of methane conversion,91% of H 2 and as high as 10 ml cm-2·min-1 of oxygen permeation flux were obtained.There was a good match in the coefficient of thermal expansion between Ag-based alloy and BCFNO membrane materials.The tubular BCFNO membrane reactor packed with Ni-based catalysts exhibited not only high activity but also good stability in hydrogen-enriched coke oven gas(COG) atmosphere.
文摘Recently the CAS Qingdao Institute of Bioenergy and Processes in collaboration with the Leibniz Universit?t Hannover,Forschungszentrum Jülich and Bayer AG has made attempts to carry out methane aromatization reaction in an oxygen-permeable membrane reactor to
基金supported by grants from the Natural Science Foundation of China(22362031 and 21805121)the Science and Technology Project of Yunnan Province(2019FD137)。
文摘Proton exchange membrane fuel cells(PEMFCs)are considered as a promising renewable power source.However,the massive commercial application of PEMFCs has been greatly hindered by their high expense and less-satisfied performance mainly due to the sluggish oxygen reduction reaction(ORR)kinetics even on state-of-the-art Pt catalyst.Octahedral PtNi nanoparticles(oct-PtNi NPs)with excellent ORR activity in a half-cell have been widely studied,while their performance in membrane electrode assembly(MEA)has much less reported.Herein,we investigated the MEA performance using the carbon supported oct-PtNi NPs(oct-PtNi/C)as the cathode catalyst.Under the mild acid washing condition,the surface Ni atoms of oct-PtNi/C were largely removed,and the performance of the MEA using the acid-leaching oct-PtNi/C(PNC-A)as the cathode catalyst was greatly improved.The maximum power density of the MEA reached 1.0 W·cm^(-2) with the cath-ode Pt loading of 0.2 mg·cm^(-2),which is 15%higher than that using Pt/C as the catalyst.After 30k cycles in the accelerated degradation test(ADT),the MEA using PNC-A as the catalyst showed a performance retention of 82%,higher than that of Pt/C(74%).The results reported here verify the possibility of using PNC-A as an advanced cathode catalyst in PEMFCs,thus enhancing the performance of PEMFCs while lowering the amount of expensive Pt.
基金supported by the National Key Research and Development Program of China (2022YFE0138900)the “Scientific and Technical Innovation Action Plan” Basic Research Field of Shanghai Science and Technology Committee (19JC1410500)。
文摘Ion-solvaing membranes(ISMs)have received extensive attention in recent years as a key component in electrochemical energy conversion and storage devices.This article provides an overview of structural composition,performance advan-tages,research progress,ion conduction mechanism and existing issues of ISMs,primarily classifying them according to the matrix structure.A detailed analysis of performance enhancement methods,key performance indicators of ISMs and performance influencing factors is also presented.The article contributes to further optimizing the design and application of ion-solvation membranes,providing theoretical support for the development of fields such as hydrogen production through electrolysis of water and electrochemical energy in the future.
基金financially supported by the National Key Research and Development Program of China (2021YFA1201304)the National Natural Science Foundation of China (52503082)+3 种基金China Postdoctoral Science Foundation (2024M750402)Postdoctoral Fellowship Program of CPSF (GZC20230419)Shanghai Anticancer Association EYAS PROJECT (SACA-CY23C05)The Fundamental Research Funds for the Central Universities (2232023D-03, 2232024Y-01)
文摘Diabetic wounds present challenges in clinical management due to persistent inflammation caused by excessive exudate infiltration.Inspired by the gradient wettability of cactus thorn,this study has devised a biomimetic Janus nanofiber membrane as a water diode,which endows with gradient wettability and gradient pore size,offering sustainable unidirectional self-drainage and antibacterial properties for enhanced diabetic wound healing.The Janus membrane is fabricated by depositing a hydrophilic polyacrylonitrile/chlorin e6 layer with smaller pore sizes onto a hydrophobic poly(ε-caprolactone)with larger pore sizes,thereby generating a vertical gradient in both wettability and pore structure.The incorporation of chlorin e6 in the upper layer enables the utilization of external light energy to generate heat for evaporation and produce reactive oxygen species,achieving a high sterilization efficiency of 99%.Meanwhile,the gradient structure of the Janus membrane facilitates continuous antigravity exudate drainage at a rate of 0.95 g cm^(−2) h^(−1).This dual functionality of effective exudate drainage and sterilization significantly reduces inflammatory factors,allows the polarization of macrophages toward the M2 proliferative phenotype,enhances angiogenesis,and accelerates wound healing.Therefore,this study provides a groundbreaking bioinspired strategy for the development of advanced wound dressings tailored for diabetic wound regeneration.
基金financially supported by the National Natural Science Foundation of China(No.22308085)Science and Technology Plan Project of Shijiazhuang(Nos.241130547A and241791337A)Natural Science Foundation of Hebei Province(No.B2020208083)。
文摘Membrane distillation(MD)is an advanced membrane separation process that employs hydrophobic microporous membranes to sepa rate non-volatile solutes from the feed solution,driven by vapor pressure gradients generated through thermal difference.This technology offers strong desalination capabilities and efficiently harnesses low-grade thermal energy sources,including geothermal and waste heat,making it a cost-effective solution for freshwater scarcity.Nevertheless,hydrophobic membranes are prone to contamination by surfactants,inorganic salts,and other substances in feed solutions.To address this,low-surface-energy composite nano-inorganic materials composed of carbon nanotubes and silica were modified and synthesized via organosilicon chemistry.A superhydrophobic surface exhibiting a water contact angle of157.96°was successfully fabricated using above nano-materials on poly(vinylidene fluoride)(PVDF)membrane surface with micro-nano structures via a one-step spray-coating method.Compared to unmodified PVDF membra ne,the superhydrophobic membrane demonstrated superior resistance to common scaling agents such as CaCl_(2),Mg(OH)_(2),CaCO_(3),and CaSO_(4),while maintaining stable permeate flux(13.4 kg·m^(-2)·h^(-1))during MD tests.Additionally,the modified membra ne exhibited enhanced wetting resistance when treating feed solutions containing sodium dodecyl sulfate(SDS),significantly extending the operational lifespan of the membrane.Due to its outstanding performance,this superhydrophobic membrane is expected to promote the practical application of MD technology in the treatment of complex wa stewater and efficient seawater desalination.
基金Special Research Assistant Program,China(2024000020)the Science and Technology Department of Qinghai Province,China(2024-ZJ-918)the“Kunlun Talents”Program of Qinghai(2024000075)。
文摘Abstract:Graphene-Based separation membranes hold promise for water treatment.However,their practical deployment in high-salinity brines remains challenging due to structural instability.Herein,a defect-free Na^(+)-Cu^(2+)/GO-PEI nanocomposite membrane was fabricated via a pH-controlled cross-linking polymerization strategy.Polyethyleneimine(PEI)serves as a critical interfacial stabilizer,enhancing the connection between the Na^(+)-GO and Cu^(2+)-GO layers through amide bond formation with GO nanosheets while facilitating Cu^(2+)chelation.The Na^(+)/GO layer modifies the pore structure of the polyether sulfone(PES)substrate,synergistically optimizing the membrane’s microstructure.Performances evaluation revealed that the as-prepared membrane achieved exceptional separation efficiency(>98%)for tributyl phosphate,sulfonated kerosene,and bis(2-ethylhexyl)phosphate in high-salinity brine,accompanied by a high flux of 160~224 L·m^(-2)·h^(-1).Notably,it exhibited robust chemical stability in corrosive environment and maintained mechanical durability after 500 folding cycles coupled with consistent separation performances over 10 recycles.This study presents a novel multi-component modification approach for constructing high-performance GObased membrane,promising practical applications in organic pollutant removal from high salt solution.
基金the National Natural Science Foundation of China (Nos.52430001,52470091,52200108) for the financial support。
文摘Nanofiltration(NF) technology,with its capacity for nanoscale filtration and controllable selectivity,holds significant promise in diverse applications.However,the current upper bound of permeance and selectivity of NF membranes is intrinsically constrained by the morphology and structure of the polyamide(PA) selective layer.This issue arises because NF membranes typically exhibit relatively smooth nodular structures,which theoretically impede efficient water transport.In this study,we enhanced the formation of nanobubbles by synergistically regulating with surfactant and low temperatures,resulting in the fabrication of PA NF membranes with a crumpled morphology.We observed that lower temperatures promote enhanced gas solubility in the aqueous phase,facilitating increased nanobubble formation through the foaming effect of surfactant sodium dodecylbenzene sulfonate(SDBS).Consequently,this resulted in the creation of PA NF membranes with more crumpled structures and superior performance,with pure water permeance reaching 36.25 ± 0.42 L m^(-2)h^(-1)bar^(-1),representing an improvement of 14.47 L m^(-2)h^(-1)bar^(-1)compared to the control group.Additionally,it maintains a high Na_(2)SO_(4) rejection rate of97.00 % ± 0.58 %.The PA NF membranes produced by eliminating nanobubbles and free interfaces exhibited a smooth structure,whereas introducing nanobubbles(through Na HCO_(3) addition,N_(2) pressurization,and ultrasonication) resulted in the formation of crumpled membranes.This emphasized that the large amount of nanobubbles generated by SDBS and low temperature in the interfacial process played a critical role in shaping crumpled PA NF membranes and enhancing membrane performance.This approach has the potential to provide valuable insights into customizing the structural design of TFC PA NF membranes,contributing to further advancements in this field.
基金Funded in part by the National Key Research and Development Program of China(No.2023YFB4006302)。
文摘We successfully incorporated phenyl groups into a small-molecule quaternary ammonium cross-linker and synthesized cross-linked polybenzimidazole membranes via a one-step cross-linking process.Compared with conventional quaternary ammonium-crosslinked benzimidazole membranes,the introduction of phenyl groups significantly increases the free volume within the membrane.After phosphoric acid doping,the benzimidazole membrane with larger free volume retains more phosphoric acid compared to conventional quaternary ammonium-crosslinked membranes,forming an extensive hydrogen-bonding network that effectively enhances its anhydrous proton conductivity.The anhydrous proton conductivity reaches 91 mS·cm^(-1)at 160℃,substantially higher than that of conventional quaternary ammonium-crosslinked membranes with the same mass fraction.Benefiting from the improved conductivity,the membrane electrode assembly exhibits reduced ohmic polarization,achieving a peak power density of 792 mW·cm^(-2)at 160℃.
文摘Covalent organic framework ionomers enable synergistic efficient transport of protons and oxygen in medium-temperature proton exchange membrane fuel cells Proton exchange membrane fuel cells(PEMFCs),as clean and efficient energy technologies,are constrained in their performance enhancement by the sluggish oxygen reduction reaction(ORR)kinetics at the cathode,anode CO poisoning(e.g.,from methanol crossover)and intricate water management dilemmas[1].
基金The National Key Research and Development Program of China(2020YFC0862903)Supported by Jiangsu Future Membrane Technology Innovation Center(BM2021804)National Foreign Expert Program(H20240294).
文摘To develop an efficient filter for removing white blood cells from whole blood,hydrophilic large-pore blended membranes of poly(vinylidene fluoride)(PVDF),polyvinyl pyrrolidone and polyethylene glycol,with good biocompatibility,were prepared using the process of vapor-induced phase separation at various PVDF concentrations.The results demonstrated that at a PVDF mass concentration of 14%,the membrane had increased surface roughness,significantly enhanced hydrophilicity and wettability,and a wetting time of 8 s.The surface roughness of the membrane was also reduced to 31.637 nm.Furthermore,hemolysis rate and protein adsorption tests indicated that the blended membranes possessed excellent biocompatibility.They were reduced to 2.48%and 34.44μg·cm^(−2),respectively.The pore size of the fabricated membrane was relatively large,which reached approximately 8μm respectively,satisfying the filtration requirements.Lastly,the effects of different temperatures and multi-layered filters on leukocyte removal and the retention of red blood cells and platelets from whole blood were evaluated.The results revealed that the leukocyte removal rate was highest at 4℃ and with three membrane layers,the leukocyte removal rate was highest,reaching 98.36%,while the RBC and platelet content remained nearly unchanged compared with the original blood.This study provides a new approach for blood cell separation that is expected to play a significant role in medical fields such as blood transfusion demonstrating great potential for application and innovation.
基金supported by the National Natural Science Foundation of China(52277225)the Fundamental Research Funds for the Central Universities(xtr052024009).
文摘Proton exchange membranes(PEMs)play a central role in determining the efficiency,durability,and operational flexibility of PEM fuel cells(PEMFCs).However,conventional PEMs exhibit strong temperature-dependent proton-transport behavior,which limits their ability to support both rapid start-up at low temperatures and stable operation at elevated temperatures.Water-mediated PEMs show excellent conductivity under low-temperature and high-humidity conditions but suffer from dehydration and structural instability in the high-temperature regime.In contrast,water-independent PEMs,particularly phosphoric-acid-doped systems,conduct protons efficiently under anhydrous high-temperature conditions yet experience acid leaching that hampers room-temperature start-up and long-term durability.This review summarizes the fundamental proton-transport mechanisms that govern temperature-dependent performance and discusses recent advances in materials design aimed at enabling wide-temperature-range PEM operation.For water-mediated membranes,strategies such as incorporating hydrophilic fillers,constructing confined hydrophilic domains,and introducing additional proton-transfer sites have been developed to mitigate water loss and stabilize proton conduction.For water-independent membranes,approaches including strengthening polymer–acid interactions,engineering nanoscale confinement,designing multilayer architectures,and constructing multi–proton-carrier networks effectively improve acid retention and broaden operational temperature windows.Emerging fixed-carrier systems based on phosphonic-acid-grafted polymers,metal–organic frameworks,and covalent organic frameworks offer new pathways for stable anhydrous proton conduction across a wide temperature range.We conclude by outlining key challenges and future research opportunities,including reducing the dependence on volatile or leachable proton carriers,developing adaptive nanochannel architectures,improving anhydrous high-temperature conduction,and establishing scalable membrane fabrication methods.Continued innovation in these directions is expected to enable next-generation wide-temperature-range PEMs capable of flexible,high-efficiency operation from sub-zero to high-temperature conditions.
基金Supported by Chengdu Municipal Science and Technology Bureau Key R&D Support Program(No.2023-YF09-00041-SN)。
文摘AIM:To assess risk factors for epiretinal membranes(ERM)and examine their interactions in a nationally representative U.S.dataset.METHODS:Data from the 2005–2008 National Health and Nutrition Examination Survey(NHANES)were analyzed,a nationally representative U.S.dataset.ERM was identified via retinal imaging based on the presence of cellophane changes.Key predictors included age group,eye surgery history,and refractive error,with additional demographic and health-related covariates.Weighted univariate and multiple logistic regression models were used to assess associations and interaction effects between eye surgery and refractive error.RESULTS:Totally 3925 participants were analyzed.Older age,eye surgery,and refractive errors were significantly associated with ERM.Compared to those under 65y,the odds ratio(OR)for ERM was 3.08 for ages 65–75y(P=0.0014)and 4.76 for ages 75+years(P=0.0069).Eye surgery increased ERM risk(OR=3.48,P=0.0018).Moderate to high hyperopia and myopia were also associated with ERM(OR=2.65 and 1.80,respectively).A significant interaction between refractive error and eye surgery was observed(P<0.0001).Moderate to high myopia was associated with ERM only in those without eye surgery(OR=1.92,P=0.0443).Eye surgery was most strongly associated with ERM in the emmetropic group(OR=3.60,P=0.0027),followed by the moderate to high myopia group(OR=3.01,P=0.0031).CONCLUSION:ERM is significantly associated with aging,eye surgery,and refractive errors.The interaction between eye surgery and refractive error modifies ERM risk and highlights the importance of considering combined effects in clinical risk assessments.These findings may help guide individualized ERM risk assessment that may inform personalized approaches to ERM prevention and management.
基金financial support from the National Natural Science Foundation of China (22338011, 22378299)Hainan Province Science and Technology Special Fund (ZDYF2025SHFZ025)+1 种基金Ningbo Key Research and Development Project (2022Z121)the China Postdoctoral Science Foundation (2025M771194)。
文摘Due to complex ion-ion and ion-membrane interactions, creating innovative membrane structures to acquire favorable ion mixing effect and high separation performance remains a big challenge. Herein, we design covalent organic framework(COF) scaffold membrane with gate-lane nanostructure for efficient Li^(+)/Mg^(2+) separation. COF nanosheets, serving as the scaffold, are intercalated by polyethyleneimine(PEI) to form the permeating layer. Subsequently, PEI on the surface reacts with 1,4-phenylene diisocyanate to form the polyurea gating layer. The gating layer, bearing tailored smaller pore size,affords high rejection to co-ions(Mg^(2+)) and thus high Li^(+)/Mg^(2+) selectivity. The permeating layer, with asymmetric charge and spatial nanostructure for creating individual lanes of Li^(+) and Cl~-, facilitates Li^(+) transport and thus high Li^(+) permeability. The optimum COF scaffold membrane exhibits the permeance of 11.5 L m^(-2) h^(-1)/bar^(-1) and true selectivity of 231.9 with Li^(+) enrichment of 120.2% at the Mg^(2+)/Li^(+) mass ratio of 50, exceeding the ideal selectivity of 80.5 and outperforming all ever-reported positively charged nanofiltration membranes. Our work may stimulate the further thinking about how to design the hierarchical membrane structure to achieve favorable ion mixing effect and break the membrane permeability-selectivity trade-off in chemical separations.
基金the National Natural Science Foundation of China(82573571)the Shanghai 2025 Basic Research Plan Natural Science Foundation(25ZR1401393)the First Batch of Open Topics of the Shanghai Key Laboratory of Nautical Medicine and Translation of Drugs and Medical Devices(2025QN13)。
文摘The global burden of bacterial infections,exacerbated by antimicrobial resistance(AMR),necessitates innovative strategies.Bacterial protein vaccines offer promise by eliciting targeted immunity while circumventing AMR.However,their clinical translation is hindered by their inherently low immunogenicity,often requiring potent adjuvants and advanced delivery systems.Biomembrane nanostructures(e.g.,liposomes,exosomes,and cell membrane-derived nanostructures),characterized by superior biocompatibility,intrinsic targeting ability,and immune-modulating properties,could serve as versatile platforms that potentiate vaccine efficacy by increasing antigen stability,enabling codelivery of immunostimulants,and facilitating targeted delivery to lymphoid tissues/antigen-presenting cells.This intrinsic immunomodulation promotes robust humoral and cellular immune responses to combat bacteria.This review critically reviews(1)key biomembrane nanostructure classes for bacterial protein antigens,(2)design strategies leveraging biomembrane nanostructures to enhance humoral and cellular immune responses,(3)preclinical efficacy against diverse pathogens,and(4)translational challenges and prospects.Biomembrane nanostructure-driven approaches represent a paradigm shift in the development of next-generation bacterial protein vaccines against resistant infections.
基金Open access funding provided by FCT|FCCN(b-on)the Strategic Research Plan of the Centre for Marine Technology and Ocean Engineering(CENTEC),which is financed by the Portuguese Foundation for Science and Technology(Fundação para a Ciência e Tecnologia-FCT)under contract UIDB/UIDP/00134/2020.
文摘An analytical model of a floating heaving box integrated with a vertical flexible porous membrane placed right next to the box applications to wave energy extraction and breakwater systems is developed under the reduced wave equation.The theoretical solutions for the heave radiating potential to the assigned physical model in the corresponding zones are attained by using the separation of variables approach along with the Fourier expansion.Applying the matching eigenfunction expansion technique and orthogonal conditions,the unknown coefficients that are involved in the radiated potentials are determined.The attained radiation potential allows the computation of hydrodynamic coefficients of the heaving buoy,Power Take-Off damping,and wave quantities.The accuracy of the analytical solution for the hydrodynamic coefficients is demonstrated for different oblique angles with varying numbers of terms in the series solution.The current analytical analysis findings are confirmed by existing published numerical boundary element method simulations.Several numerical results of the hydrodynamic coefficients,power capture,power take-off optimal damping,and transmission coefficients for numerous structural and physical aspects are conducted.It has been noted that the ideal power take-off damping increases as the angle of incidence rises,and the analysis suggests that the ability to capture waves is more effective in shallower waters compared to deeper ones.
基金financially supported by the National Key Research and Development Program of China(No.2021YFB3801500)Fundamental Research Funds of Zhejiang Sci-Tech University(No.24202105-Y)。
文摘Solid polymer electrolytes(SPEs)are considered promising candidates for all-solid-state lithium metal batteries because of their easy preparation and good compatibility with lithium metal.However,their applications are restricted by their low ionic conductivity and poor mechanical properties.In this study,a composite solid polymer electrolyte composed of poly(ethylene oxide)(PEO),poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP),plasticizer succinonitrile(SN),and polytetrafluoroethylene(PTFE)fibrous porous membranes was prepared.The PTFE fibrous membrane significantly enhanced the mechanical strength of the electrolyte as a supporting framework.SN reduced the crystalline regions of PEO and facilitated rapid lithium-ion transport.PVDF-HFP promoted lithium salt dissolution and improved the electrochemical stability of the electrolyte.Accordingly,the optimized PTFE/PEO/PVDF-HFP/SN polymer electrolyte exhibited a tensile strength of 3.31 MPa at 352%elongation and demonstrated an ionic conductivity of 7.6×10^(-4)S·cm^(-1)at 60℃.Lithium symmetric cells maintained stable cycling for over 2500 h at 0.15 m A·cm^(-2),and Li//Li Fe PO_(4) full cells showed a high capacity retention of 91.6%after 300 cycles at 0.5 C,with coulombic efficiency consistently exceeding 99.9%throughout cycling.
文摘Objective:To explore the therapeutic effect of double-puncture tympanic membrane puncture and tympanic cavity drug injection in patients with acute secretory otitis media.Methods:A total of 84 patients with acute secretory otitis media admitted to our hospital from June 2024 to June 2025 were selected and randomly divided into two groups by drawing lots.The control group(42 cases)was treated with the traditional single-puncture tympanic membrane puncture and tympanic cavity drug injection method,while the observation group(42 cases)was treated with the double-puncture tympanic membrane puncture and tympanic cavity drug injection method.The therapeutic effects of the two groups were compared.Results:The overall treatment response rate,overall complication rate,time to symptom relief,and improvement in hearing threshold in the observation group were all superior to those in the control group,with statistically significant differences(P<0.05).Conclusion:For acute secretory otitis media,the treatment method of double-puncture tympanic membrane puncture and tympanic cavity drug injection demonstrates definite efficacy,significantly reducing the incidence of complications,accelerating symptom relief,and improving hearing function,making it worthy of promotion.