Analysis of the energy balance of various parts during the basic oxygen furnace(BOF)steelmaking is of vital importance for revealing the blowing characteristics of the swirl-type oxygen lance.The energy transfer behav...Analysis of the energy balance of various parts during the basic oxygen furnace(BOF)steelmaking is of vital importance for revealing the blowing characteristics of the swirl-type oxygen lance.The energy transfer behavior between the oxygen jet and the molten bath in the top-blowing steelmaking process was investigated using the volume of fluid method.The energy of the reflected jet and the slag was introduced,and the energy balance model of the BOF converter was modified.The influences of lance height and operation pressure on energy transfer were analyzed.Compared with the traditional oxygen lance,the energy of reflected jet,splashing,and cavity formation of the swirl-type oxygen lance was decreased.However,the energy of jet attenuation,slag,and molten steel increased.The energy proportion of the reflected jet was about 8%,while the energy of slag was 15%of molten steel.The maximum energy was transferred from the jet to the slag and molten steel at H=40de(H is lance height and de is outlet diameter).When the operation pressure increased from 0.8P0 to 1.2P0(P0 is the designed pressure),the energy of slag and molten steel was increased by 33%and 25.9%,respectively.展开更多
A double-parameter oxygen lance used in a 300 t converter was designed to improve the metallurgical performance. A small-scale measurement of the jet behavior was done using a computer controlled scanning system. The ...A double-parameter oxygen lance used in a 300 t converter was designed to improve the metallurgical performance. A small-scale measurement of the jet behavior was done using a computer controlled scanning system. The experimental data on the velocity distribution at the jet centerline, the contour map of the jet velocity, the deviation of the jet centerline, and the velocity distribution of the axial section were compiled. According to the results of the small-scale measurement, the double-parameter lance was also employed for a BOF experiment. The metallurgy inde- xes show that the metallurgical performance was highly promoted by use of the double-parameter lance.展开更多
Based on the operating conditions of oxygen lance utilized for a 50 t converter in Tangsteel,gas jet flow fields of three types of oxygen lances were simulated by FLUENT software.The influence of lance configuration a...Based on the operating conditions of oxygen lance utilized for a 50 t converter in Tangsteel,gas jet flow fields of three types of oxygen lances were simulated by FLUENT software.The influence of lance configuration and lance level on penetrating area was studied through cold model experiment.The results showed that the gas flow velocities of four-hole,variable angle four-hole and five-hole oxygen lances declined rapidly with an increase in gas jet length within 1 m,1 m and 0.8 m,respectively.Besides,the multi gas streams sprayed from these three lances should be syncretized at 1.6 m,1.7 m and 1.4 m,respectively.At the highest lance level,the effective penetrating area of these three lances could be 0.255 m2,0.385 m2 and 0.0907 m2,respectively.It was suggested that the effective penetrating area of variable angle four-hole oxygen lance was the biggest,while that of five-hole oxygen lance was the least.The validity of numerical simulation results was proved through cold model experiment.The lance level was suggested to be controlled in the range of 1-1.6 m,1-1.7 m and 0.8-1.4 m for the four-hole,variable angle four-hole and five-hole oxygen lances,respectively.展开更多
基金financially supported by the Natural Science Foundation of Liaoning Province,China(Grant No.2024-BS-219)the Education Department Project of Liaoning Province(JYTMS20230932)+3 种基金the National Natural Science Foundation of China(U20A20272)the Department of Science&Technology of Liaoning Province(Grant No.2022JH2/101300079)the Fundamental Research Funds for the Liaoning Universities(LJ212410146002)the National Natural Science Foundation of China(NSFC52074151).
文摘Analysis of the energy balance of various parts during the basic oxygen furnace(BOF)steelmaking is of vital importance for revealing the blowing characteristics of the swirl-type oxygen lance.The energy transfer behavior between the oxygen jet and the molten bath in the top-blowing steelmaking process was investigated using the volume of fluid method.The energy of the reflected jet and the slag was introduced,and the energy balance model of the BOF converter was modified.The influences of lance height and operation pressure on energy transfer were analyzed.Compared with the traditional oxygen lance,the energy of reflected jet,splashing,and cavity formation of the swirl-type oxygen lance was decreased.However,the energy of jet attenuation,slag,and molten steel increased.The energy proportion of the reflected jet was about 8%,while the energy of slag was 15%of molten steel.The maximum energy was transferred from the jet to the slag and molten steel at H=40de(H is lance height and de is outlet diameter).When the operation pressure increased from 0.8P0 to 1.2P0(P0 is the designed pressure),the energy of slag and molten steel was increased by 33%and 25.9%,respectively.
文摘A double-parameter oxygen lance used in a 300 t converter was designed to improve the metallurgical performance. A small-scale measurement of the jet behavior was done using a computer controlled scanning system. The experimental data on the velocity distribution at the jet centerline, the contour map of the jet velocity, the deviation of the jet centerline, and the velocity distribution of the axial section were compiled. According to the results of the small-scale measurement, the double-parameter lance was also employed for a BOF experiment. The metallurgy inde- xes show that the metallurgical performance was highly promoted by use of the double-parameter lance.
文摘Based on the operating conditions of oxygen lance utilized for a 50 t converter in Tangsteel,gas jet flow fields of three types of oxygen lances were simulated by FLUENT software.The influence of lance configuration and lance level on penetrating area was studied through cold model experiment.The results showed that the gas flow velocities of four-hole,variable angle four-hole and five-hole oxygen lances declined rapidly with an increase in gas jet length within 1 m,1 m and 0.8 m,respectively.Besides,the multi gas streams sprayed from these three lances should be syncretized at 1.6 m,1.7 m and 1.4 m,respectively.At the highest lance level,the effective penetrating area of these three lances could be 0.255 m2,0.385 m2 and 0.0907 m2,respectively.It was suggested that the effective penetrating area of variable angle four-hole oxygen lance was the biggest,while that of five-hole oxygen lance was the least.The validity of numerical simulation results was proved through cold model experiment.The lance level was suggested to be controlled in the range of 1-1.6 m,1-1.7 m and 0.8-1.4 m for the four-hole,variable angle four-hole and five-hole oxygen lances,respectively.
