Propylene oxide(PO)is an important petrochemical materials used to produce downstream products such as propylene glycol(PG),polyether polyols,and dipropylene glycol(DPG).Among these,DPG is commonly used as a solvent f...Propylene oxide(PO)is an important petrochemical materials used to produce downstream products such as propylene glycol(PG),polyether polyols,and dipropylene glycol(DPG).Among these,DPG is commonly used as a solvent for fragrances,cosmetics,food additives,and detergents,and can also be served as a moisturizer in cosmetics,showing broad application prospects.The distribution of DPG isomers in the products synthesized from PO and PG has a significant impactΔrGΔrHΔfHθΔfGθPO+PG⇌DPG PO+DPG⇌TPG PG+PG⇌DPG+H_(2)O PG+DPG⇌TPG+H_(2)O on the quality of the products.Therefore,conducting thermodynamic calculation on the reaction of PO and PG to synthesize DPG can provide a theoretical basis for practical operations and product distribution regulation.So,in this paper,the thermodynamic parameters of PO,1,2-PG,H_(2)O,tripropylene glycol(TPG)and three isomers of DPG under different reaction conditions is calculated.Additionally,the,and lnK for four potential reactions at various reaction temperatures and pressures are calculated.By designing isodesmic reactions and combining the results of thermodynamic calculations,the and for the isomers of DPG are obtained,and the relative error is less than 7%.The results show that in the process of preparing DPG by PO and PG,when PO∶PG=1,the reaction temperature ranges from 298.15 to 413.15 K,and the pressure ranges from 101.325 to 506.625 kPa,the reactions of and are thermodynamically spontaneous.While the reactions of and are thermodynamically unspontaneous.The optimal reaction temperature and pressure are 413.15 K and 101.325 kPa.The thermodynamic stability of the three isomers is DPG1>DPG2>DPG3 under standard conditions.The accuracy of the computational results is verified through experimental design,and based on this,the factors affecting product distribution are analyzed.展开更多
Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon ...Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.展开更多
It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,...It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,and FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbents were prepared by coupling fly ash-based Si-Al carriers.The active components Fe-Ce-La oxides and Si-Al carriers were characterized by TPD,TG,XRF,BET and XPS,respectively.The effects of temperature,Si/Al ratio and FeCeLaO loading rate on the sulfur resistance were investigated.Results show that the SO_(2) promotes the arsenic removal of Fe_(2)O_(3),CeLaO and FeCeLaO.At 400℃,the arsenic removal efficiencies of the three oxides increase from 45.3%,72.5% and 81.3% without SO_(2) to 62.6%,80.5%and 91.0%,respectively.The SO_(2) inhibits the arsenic removal of La_(2)O_(2)CO_(3) and FeLaO,and the inhibition effect is pronounced at high temperatures.The sulfur poisoning resistance of Si-Al carriers increases with the increase of Si/Al ratio.When the Si/Al ratio is increased to 9.74,the arsenic removal efficiency in the SO_(2) environment is 13.9% higher than that in the absence of SO_(2).Introducing FeCeLaO active components is beneficial for enhancing the SO_(2) poisoning resistance of Si-Al carriers.The strong sulfur resistance of the FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbent results from multiple factors:protective effects of Ce on Fe,La and Al;sulfation-induced generation of Ce^(3+)and surface-adsorbed oxygen;and strong surface acidity of SiO_(2).展开更多
Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosi...Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosion resistance and the role of the oxide scale in corrosion environments.The corrosion resistance of CF-PHS with and without oxide scale was comprehensively evaluated by analyzing electrochemical processes and corrosion products,as well as characterizing the corroded oxide scale features,while comparing it with commercial 22MnB5 steel.The results indicate that CF-PHS exhibits superior corrosion resistance compared to 22MnB5 steel and the presence of oxide scale may have a negative influence on short-time corrosion resistance.The ultra-thin oxide scale is unable to effectively and timely mitigate pit propagation during the rapid electrochemical tests.Conversely,during the prolonged corrosion process,the oxide scale can still function as the physical barrier to provide protective effects,making the corrosion process develop more slowly and evenly.展开更多
Nitric oxide(NO)is a key vasodilator that regulates vascular pressure and blood flow.Tibetans have developed a"blunted"mechanism for regulating NO levels at high altitude,with GTP cyclohydrolase 1(GCH1)ident...Nitric oxide(NO)is a key vasodilator that regulates vascular pressure and blood flow.Tibetans have developed a"blunted"mechanism for regulating NO levels at high altitude,with GTP cyclohydrolase 1(GCH1)identified as a key candidate gene.Here,we present comprehensive genetic and functional analyses of GCH1,which exhibits strong Darwinian positive selection in Tibetans.We show that Tibetan-enriched GCH1 variants down-regulate its expression in the blood of Tibetans.Based on this observation,we generate the heterozygous Gch1 knockout(Gch1^(+/-))mouse model to simulate its downregulation in Tibetans.We find that under prolonged hypoxia,the Gch1^(+/-)mice have relatively higher blood NO and blood oxygen saturation levels compared with the wild-type(WT)controls,providing better oxygen supplies to the cardiovascular and pulmonary systems.Markedly,hypoxia-induced cardiac hypertrophy and pulmonary remodeling are significantly attenuated in the Gch1^(^(+/-))mice compared with the WT controls,likely due to the adaptive changes in molecular regulations related to metabolism,inflammation,circadian rhythm,extracellular matrix,and oxidative stress.This study sheds light on the role of GCH1 in regulating blood NO,contributing to the physiological adaptation of the cardiovascular and pulmonary systems in Tibetans at high altitude.展开更多
Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artific...Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.展开更多
Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modi...We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.展开更多
Sodium layered oxides stand out as one of the most promising cathodes for sodium-ion batteries due to their high energy density,elemental abundance,and scalability.However,their practical applications are restricted b...Sodium layered oxides stand out as one of the most promising cathodes for sodium-ion batteries due to their high energy density,elemental abundance,and scalability.However,their practical applications are restricted by interplanar gliding,cation migration,and the formation of intragranular microcracks,which collectively lead to rapid structural degradation and capacity loss.Herein,we rationally design an ultrastable O3-type Na_(0.94)Ca_(0.03)Ni_(1/3)Fe_(1/3)Mn_(1/3)O_(2) cathode,in which Ca^(2+)cations act as pillars within the NaO_(2)slabs,suppressing the irreversible phase transitions and Na/TM cation migration commonly observed in layered oxides.Multiscale in situ and ex situ techniques,combined with post-mortem analysis,reveal that the Ca-pillared pinning effect not only effectively suppresses the interplanar gliding and stress accumulation within the crystal phase but also restrains Na/TM cation migration and surface reconstruction in near-surface regions.Benefiting from the combined effects of structural stabilization,the Ca-pillared cathode exhibits a superior cycling stability,retaining 81.6%of its capacity after 1000 cycles at 2 C within the voltage range of 2.0-4.0 V,along with significantly enhanced wide-temperature(from-40 to 80℃)performance.This work highlights another critical role of Ca pillars in suppressing cation migration and surface structural degradation beyond preventing adverse interplanar gliding,offering valuable insights for designing long-life and wide-temperature layered oxide cathodes.展开更多
The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of thes...The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of these materials is impeded by two main factors:the MnO_(6) structure distortion induced by the Jahn-Teller(J-T)effect of Mn^(3+),and the unfavorable phase transitions that occur during the insertion and extraction of Na^(+).Here,we present a strategy to improve structural stability by incorporating cost-effective,robust Al-O bonds.This approach induces localized adjustments in the electronic structu re and a pinning effect,which limits the deformation of the transition metal(TM)layers,strengthens the electrostatic bonding within the TM layers,and expands the Na layer spacing.Consequently,the Na_(0.67)Fe_(0.4)Mn_(0.54)Al_(0.06)O_(2) cathode demonstrates a capacity of 168.8 mAh g^(-1) at 0.1 C,maintaining89.2%of its original capacity after 200 cycles at 1 C.Through in situ electrochemical impedance spectroscopy(EIS)with dynamic resistance transformation(DRT)analysis,ex situ X-ray absorption spectroscopy(XAS),and in situ X-ray diffraction(XRD),the study demonstrates a reduction in the J-T effect,enhanced kinetic performance,and the inhibition of detrimental phase transitions.This study offers new avenues to the development and design of future low-cost Fe/Mn-based cathodes.展开更多
The oxygen evolution reaction(OER)suffers from sluggish kinetics,necessitating efficient electrocatalysts to reduce overpotentials in water splitting.Currently recognized OER mechanisms primarily include the adsorbate...The oxygen evolution reaction(OER)suffers from sluggish kinetics,necessitating efficient electrocatalysts to reduce overpotentials in water splitting.Currently recognized OER mechanisms primarily include the adsorbate evolution mechanism(AEM),lattice oxygen mechanism(LOM),and oxide path mechanism(OPM).Compared to AEM,limited by scaling relationships,and LOM,constrained by stability issues,the OPM offers a promising alternative by enabling direct O-O bond formation via dual active sites,thus bypassing^(*)OOH intermediates and lattice O involvement and achieving a balance between activity and durability.However,activating the OPM process requires precise control over the spatial and electronic structure of active sites,making the design of OPM-based catalysts challenging.While previous reviews have focused on homo/heteronuclear diatomic perspectives of OPM-based catalysts,it is urgent to systematically summarize design strategies to provide a rational reference for their development.Herein,a review of design strategies for OPM-based OER catalysts across three scales is comprehensively presented,including in-situ engineering,doping-enabled sites reconstruction,and introducing new sites for nanoparticles,direct synthesis or post-treatments for molecular catalysts,and doping or template strategies for atom pairs or arrays.The unique advantage of atom arrays is also highlighted,and their future research directions and possible strategies are discussed.This review provides a systematic summary and forward-looking perspectives for rationally designing high-performance OPM-based OER catalysts.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Poly(phenylene oxide)(PPO)exhibits excellent dielectric properties,making it an ideal substrate for high-frequency,high-speed copper-clad laminates.The phenolic hydroxyl group at the end of PPO plays a key role in its...Poly(phenylene oxide)(PPO)exhibits excellent dielectric properties,making it an ideal substrate for high-frequency,high-speed copper-clad laminates.The phenolic hydroxyl group at the end of PPO plays a key role in its reactivity.Accurately quantifying the phenolic hydroxyl content in PPO is essential but challenging.In this study,we proposed a method for measuring the phenolic hydroxyl content of PPO using differential UV absorption spectroscopy.In alkaline solutions,the phenolic hydroxyl in PPO completely ionizes to form phenoxide ions,leading to a significant increase in UV absorbance at approximately 250 and 300 nm.Notably,the differential UV absorbance at approximately 300 nm was directly proportional to the phenolic hydroxyl concentration.Using 2,6-dimethylphenol as a standard,a calibration curve was established to relate the phenolic hydroxyl concentration to differential UV absorbance at approximately 300 nm,providing a precise and straightforward method for phenolic hydroxyl quantification in PPO with distinct advantages over conventional techniques.展开更多
In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the...In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the grout-limestone interface induced by rock stress disturbances during mining.In this study,graphene oxide(GO)was integrated into cement-polyacrylate composite grout to improve its interfacial bonding.First,four-point bending tests were conducted,and the Monte Carlo method combined with the simplex search algorithm was employed to determine the variations in shear cohesion and static friction parameters.The results reveal that GO can significantly increase both the tensile and shear cohesion of the grout-limestone interface,but minimally affects the interfacial friction coefficient.Second,nuclear magnetic resonance(NMR)and scanning electron microscopy(SEM)tests were performed.The results indicate that GO nanosheets result in a squamaceous microstructure of the grout consolidation mass,increasing the adhesion of the grout-limestone interface.Moreover,spiny Aft(ettringite)clusters can be induced in limestone fracture surfaces by GO,which could serve as anchors for limestone and grout consolidation mass.展开更多
Electrocatalytic nitric oxide(NO)reduction reaction(NORR)is a promising and sustainable process that can simultaneously realize green ammonia(NH3)synthesis and hazardous NO removal.However,current NORR performances ar...Electrocatalytic nitric oxide(NO)reduction reaction(NORR)is a promising and sustainable process that can simultaneously realize green ammonia(NH3)synthesis and hazardous NO removal.However,current NORR performances are far from practical needs due to the lack of efficient electrocatalysts.Engineering the lattice of metal-based nanomaterials via phase control has emerged as an effective strategy to modulate their intrinsic electrocatalytic properties.Herein,we realize boron(B)-insertion-induced phase regulation of rhodium(Rh)nanocrystals to obtain amorphous Rh_(4)B nanoparticles(NPs)and hexagonal close-packed(hcp)RhB NPs through a facile wet-chemical method.A high Faradaic efficiency(92.1±1.2%)and NH_(3) yield rate(629.5±11.0μmol h^(−1) cm^(−2))are achieved over hcp RhB NPs,far superior to those of most reported NORR nanocatalysts.In situ spectro-electrochemical analysis and density functional theory simulations reveal that the excellent electrocatalytic performances of hcp RhB NPs are attributed to the upshift of d-band center,enhanced NO adsorption/activation profile,and greatly reduced energy barrier of the rate-determining step.A demonstrative Zn-NO battery is assembled using hcp RhB NPs as the cathode and delivers a peak power density of 4.33 mW cm−2,realizing simultaneous NO removal,NH3 synthesis,and electricity output.展开更多
As the chemical industry expands,the use of benzene,toluene,and xylene(collectively known as BTX)in industrial production has increased greatly.Meanwhile,the toxic nature and potential health hazards of BTX gases cann...As the chemical industry expands,the use of benzene,toluene,and xylene(collectively known as BTX)in industrial production has increased greatly.Meanwhile,the toxic nature and potential health hazards of BTX gases cannot be ignored due to low-concentration leaks underline the critical need for rapid and real-time monitoring of these gases.Chemiresistive metal oxide semiconductor(MOS)-based gas sensors,which are extensively used for gas detection in both industrial settings and everyday life,emerge as one of the optimal solutions for trace BTX detection.These sensors are highly valued for their high sensitivity and low detection limits.Nevertheless,the improvement of selectivity towards specific BTX gases to achieve efficient and precise detection still remains challenging.This review summarizes the chemiresistive MOS-based gas sensors designed for BTX detection,categorizing them based on the components of sensing materials-basically into three groups:single-component,single heterojunction,and multiple heterojunctions gas sensing materials.Further,the review proposes the future application prospects of chemiresistive MOS-based BTX gas sensors,with specific emphasis on their significance in promoting industrial safety and environmental monitoring.展开更多
This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
Mesenchymal stromal cell transplantation is an effective and promising approach for treating various systemic and diffuse diseases.However,the biological characteristics of transplanted mesenchymal stromal cells in hu...Mesenchymal stromal cell transplantation is an effective and promising approach for treating various systemic and diffuse diseases.However,the biological characteristics of transplanted mesenchymal stromal cells in humans remain unclear,including cell viability,distribution,migration,and fate.Conventional cell tracing methods cannot be used in the clinic.The use of superparamagnetic iron oxide nanoparticles as contrast agents allows for the observation of transplanted cells using magnetic resonance imaging.In 2016,the National Medical Products Administration of China approved a new superparamagnetic iron oxide nanoparticle,Ruicun,for use as a contrast agent in clinical trials.In the present study,an acute hemi-transection spinal cord injury model was established in beagle dogs.The injury was then treated by transplantation of Ruicun-labeled mesenchymal stromal cells.The results indicated that Ruicunlabeled mesenchymal stromal cells repaired damaged spinal cord fibers and partially restored neurological function in animals with acute spinal cord injury.T2*-weighted imaging revealed low signal areas on both sides of the injured spinal cord.The results of quantitative susceptibility mapping with ultrashort echo time sequences indicated that Ruicun-labeled mesenchymal stromal cells persisted stably within the injured spinal cord for over 4 weeks.These findings suggest that magnetic resonance imaging has the potential to effectively track the migration of Ruicun-labeled mesenchymal stromal cells and assess their ability to repair spinal cord injury.展开更多
Magnetic resonance imaging(MRI)is one of the most widely used diagnostic techniques.Iron oxide nanoparticles,as a promising kind of contrast agents,have attracted intense research interest due to their low toxicity an...Magnetic resonance imaging(MRI)is one of the most widely used diagnostic techniques.Iron oxide nanoparticles,as a promising kind of contrast agents,have attracted intense research interest due to their low toxicity and superparamagnetism.However,it is still a great challenge to prepare ideal iron oxide based contrast agents with high uniformity,excellent water solubility and biocompatibility.In this paper,a novel water-soluble polymer ligand pentaerythritol tetrakis 3-mercaptopropionate-poly(N-vinyl-2-pyrrolidone)(PTMP-PVP)was used as a capping reagent to prepare iron oxide nanoparticles MIONs@PTMP-PVP through one-step co-precipitation of iron precursors in aqueous solution at 100℃.The obtained nanoparticles MIONs@PTMP-PVP had a small size and narrow size distribution,and they were found to be biocompatible as determined through CCK-8 assay and histology analysis.In vivo MRI study demonstrated that the obtained MIONs@PTMP-PVP can be potentially used as an effective T_(2)-weighted MRI contrast agent.展开更多
Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,a...Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.展开更多
基金Supported by the Natural Science Foundation of Shanxi Province(202203021221303)the Science and Technology Major Project of Shanxi Province(202005D121002)the Science and Technology Cooperation and Communication Project of Shanxi Province(202304041101016)。
文摘Propylene oxide(PO)is an important petrochemical materials used to produce downstream products such as propylene glycol(PG),polyether polyols,and dipropylene glycol(DPG).Among these,DPG is commonly used as a solvent for fragrances,cosmetics,food additives,and detergents,and can also be served as a moisturizer in cosmetics,showing broad application prospects.The distribution of DPG isomers in the products synthesized from PO and PG has a significant impactΔrGΔrHΔfHθΔfGθPO+PG⇌DPG PO+DPG⇌TPG PG+PG⇌DPG+H_(2)O PG+DPG⇌TPG+H_(2)O on the quality of the products.Therefore,conducting thermodynamic calculation on the reaction of PO and PG to synthesize DPG can provide a theoretical basis for practical operations and product distribution regulation.So,in this paper,the thermodynamic parameters of PO,1,2-PG,H_(2)O,tripropylene glycol(TPG)and three isomers of DPG under different reaction conditions is calculated.Additionally,the,and lnK for four potential reactions at various reaction temperatures and pressures are calculated.By designing isodesmic reactions and combining the results of thermodynamic calculations,the and for the isomers of DPG are obtained,and the relative error is less than 7%.The results show that in the process of preparing DPG by PO and PG,when PO∶PG=1,the reaction temperature ranges from 298.15 to 413.15 K,and the pressure ranges from 101.325 to 506.625 kPa,the reactions of and are thermodynamically spontaneous.While the reactions of and are thermodynamically unspontaneous.The optimal reaction temperature and pressure are 413.15 K and 101.325 kPa.The thermodynamic stability of the three isomers is DPG1>DPG2>DPG3 under standard conditions.The accuracy of the computational results is verified through experimental design,and based on this,the factors affecting product distribution are analyzed.
文摘Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.
文摘It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,and FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbents were prepared by coupling fly ash-based Si-Al carriers.The active components Fe-Ce-La oxides and Si-Al carriers were characterized by TPD,TG,XRF,BET and XPS,respectively.The effects of temperature,Si/Al ratio and FeCeLaO loading rate on the sulfur resistance were investigated.Results show that the SO_(2) promotes the arsenic removal of Fe_(2)O_(3),CeLaO and FeCeLaO.At 400℃,the arsenic removal efficiencies of the three oxides increase from 45.3%,72.5% and 81.3% without SO_(2) to 62.6%,80.5%and 91.0%,respectively.The SO_(2) inhibits the arsenic removal of La_(2)O_(2)CO_(3) and FeLaO,and the inhibition effect is pronounced at high temperatures.The sulfur poisoning resistance of Si-Al carriers increases with the increase of Si/Al ratio.When the Si/Al ratio is increased to 9.74,the arsenic removal efficiency in the SO_(2) environment is 13.9% higher than that in the absence of SO_(2).Introducing FeCeLaO active components is beneficial for enhancing the SO_(2) poisoning resistance of Si-Al carriers.The strong sulfur resistance of the FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbent results from multiple factors:protective effects of Ce on Fe,La and Al;sulfation-induced generation of Ce^(3+)and surface-adsorbed oxygen;and strong surface acidity of SiO_(2).
基金supported by the National Natural Science Foundation of China(Grant Nos.U22A20106,52201112,and U22A20173)Fundamental Research Funds for the Central Universities(N25LJ002).
文摘Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosion resistance and the role of the oxide scale in corrosion environments.The corrosion resistance of CF-PHS with and without oxide scale was comprehensively evaluated by analyzing electrochemical processes and corrosion products,as well as characterizing the corroded oxide scale features,while comparing it with commercial 22MnB5 steel.The results indicate that CF-PHS exhibits superior corrosion resistance compared to 22MnB5 steel and the presence of oxide scale may have a negative influence on short-time corrosion resistance.The ultra-thin oxide scale is unable to effectively and timely mitigate pit propagation during the rapid electrochemical tests.Conversely,during the prolonged corrosion process,the oxide scale can still function as the physical barrier to provide protective effects,making the corrosion process develop more slowly and evenly.
基金funded by grants from the National Natural Science Foundation of China(32288101 and 91631306 to B.S32170632 and 32000390 to Y.H.32400503 to Y.G.)Major Scientific Project of Yunnan Province(202305AH340007 to B.S.)+4 种基金Yunnan Revitalization Talent Support Program Science&Technology Champion Project(202005AB160004 to B.S.)Yunnan Revitalization Talent Support Program Innovation Team(202405AS350008)Yunnan Scientist Workshops(to B.S.)the Youth Innovation Promotion Association of CAS(to Y.H.),the Science and Technology General Program of Yunnan Province(202301AW070010 and 202001AT070110 to Y.H.)and the Provincial Key Research,Development,and Translational Program(XZ202101ZY0009G to Baima.).
文摘Nitric oxide(NO)is a key vasodilator that regulates vascular pressure and blood flow.Tibetans have developed a"blunted"mechanism for regulating NO levels at high altitude,with GTP cyclohydrolase 1(GCH1)identified as a key candidate gene.Here,we present comprehensive genetic and functional analyses of GCH1,which exhibits strong Darwinian positive selection in Tibetans.We show that Tibetan-enriched GCH1 variants down-regulate its expression in the blood of Tibetans.Based on this observation,we generate the heterozygous Gch1 knockout(Gch1^(+/-))mouse model to simulate its downregulation in Tibetans.We find that under prolonged hypoxia,the Gch1^(+/-)mice have relatively higher blood NO and blood oxygen saturation levels compared with the wild-type(WT)controls,providing better oxygen supplies to the cardiovascular and pulmonary systems.Markedly,hypoxia-induced cardiac hypertrophy and pulmonary remodeling are significantly attenuated in the Gch1^(^(+/-))mice compared with the WT controls,likely due to the adaptive changes in molecular regulations related to metabolism,inflammation,circadian rhythm,extracellular matrix,and oxidative stress.This study sheds light on the role of GCH1 in regulating blood NO,contributing to the physiological adaptation of the cardiovascular and pulmonary systems in Tibetans at high altitude.
基金extend their gratitude to the Deanship of Scientific Research,Vice Presidency for Graduate Studies and Scientific Research,King Faisal University,Saudi Arabia,for funding the publication of this work under the Ambitious Researcher program(Project No.KFU253806).
文摘Artificial intelligence(AI)based models have been used to predict the structural,optical,mechanical,and electrochemical properties of zinc oxide/graphene oxide nanocomposites.Machine learning(ML)models such as Artificial Neural Networks(ANN),Support Vector Regression(SVR),Multilayer Perceptron(MLP),and hybrid,along with fuzzy logic tools,were applied to predict the different properties like wavelength at maximum intensity(444 nm),crystallite size(17.50 nm),and optical bandgap(2.85 eV).While some other properties,such as energy density,power density,and charge transfer resistance,were also predicted with the help of datasets of 1000(80:20).In general,the energy parameters were predicted more accurately by hybrid models.The hydrothermal method was used to synthesize graphene oxide(GO)and zinc oxide(ZnO)nanocomposites.The increased surface area,conductivity,and stability of graphene oxide in zinc oxide nanoparticles make the composite an ideal option for energy storage.X-ray diffraction(XRD)confirmed the crystallite size of 17.41 nm for the nanocomposite and the presence of GO(12.8○)peaks.The scanning electron microscope(SEM)showed anchored wrinkled GO sheets on zinc oxide with an average particle size of 2.93μm.Energy-dispersive X-ray spectroscopy(EDX)confirmed the elemental composition,and Fouriertransform infrared spectroscopy(FTIR)revealed the impact of GO on functional groups and electrochemical behavior.Photoluminescence(PL)wavelength of(439 nm)and band gap of(2.81 eV)show that the material is suitable for energy applications in nanocomposites.Smart nanocomposite materials with improved performance in energy storage and related applications were fabricated by combining synthesis,characterization,fuzzy logic,and machine learning in this work.
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金Funded by the Key Scientific and Technological Project of Zhejiang Provincial Administration for Market Regulation(No.ZD2024004)the National Natural Science Foundation of China(Nos.62304214 and 62304213)+2 种基金the Natural Science Foundation of Zhejiang Province(No.LQ23E020006)the Chunhui Project Foun-dation of the Education Department of China(No.HZKY20220198)the Fundamental Research Funds for the Provincial Universities of Zhejiang(Nos.2021YW35,2021YW36 and 2022YW62)。
文摘We employed oxygen plasma treatment to activate the PTFE surface and introduce oxygencontaining polar groups(-OH,C-O,C=O),thereby enhancing surface energy and interfacial reactivity.We subsequently composited the modified PTFE(PTFE-O)with graphene oxide(GO),enabling tight interactions between the two phases through hydrogen bonding and van der Waals forces.Comprehensive characterizations,including XPS,FTIR,SEM,and contact angle analysis,confirmed the successful surface modification and uniform dispersion of GO.The optimized PTFE-O/GO composite exhibits a low resistivity of 2.41×10^(3)Ω·cm under a compression pressure of 2 MPa,demonstrating markedly improved conductivity and antistatic performance.These findings provide an effective route for constructing conductive PTFE-based composites and offer new insights into interface-engineered antistatic polymer materials.
基金supported by the National Key R&D Program of China(2023YFB2406000)the National Natural Science Foundation of China(22479057,52172201,51732005)。
文摘Sodium layered oxides stand out as one of the most promising cathodes for sodium-ion batteries due to their high energy density,elemental abundance,and scalability.However,their practical applications are restricted by interplanar gliding,cation migration,and the formation of intragranular microcracks,which collectively lead to rapid structural degradation and capacity loss.Herein,we rationally design an ultrastable O3-type Na_(0.94)Ca_(0.03)Ni_(1/3)Fe_(1/3)Mn_(1/3)O_(2) cathode,in which Ca^(2+)cations act as pillars within the NaO_(2)slabs,suppressing the irreversible phase transitions and Na/TM cation migration commonly observed in layered oxides.Multiscale in situ and ex situ techniques,combined with post-mortem analysis,reveal that the Ca-pillared pinning effect not only effectively suppresses the interplanar gliding and stress accumulation within the crystal phase but also restrains Na/TM cation migration and surface reconstruction in near-surface regions.Benefiting from the combined effects of structural stabilization,the Ca-pillared cathode exhibits a superior cycling stability,retaining 81.6%of its capacity after 1000 cycles at 2 C within the voltage range of 2.0-4.0 V,along with significantly enhanced wide-temperature(from-40 to 80℃)performance.This work highlights another critical role of Ca pillars in suppressing cation migration and surface structural degradation beyond preventing adverse interplanar gliding,offering valuable insights for designing long-life and wide-temperature layered oxide cathodes.
基金financially supported by the National Natural Science Foundation of China(52274295)the Natural Science Foundation of Hebei Province(E2025501032,E2025501028)+3 种基金the Fundamental Research Funds for the Central Universities(N2523045,N2423051,N2423005,N2423019)the Science and Technology Project of Hebei Education Department(QN2024238)the Central Guided Local Science and Technology Development Fund Project of Hebei Province(254Z1102G)the Basic Research Program Project of Shijiazhuang City for Universities Stationed in Hebei Province(241790937A)。
文摘The P2-type Fe/Mn-based layered oxides,with cost advantages and high theoretical capacity,are considered one of the promising cathode materials for sodium-ion batteries(SIBs).However,the commercial development of these materials is impeded by two main factors:the MnO_(6) structure distortion induced by the Jahn-Teller(J-T)effect of Mn^(3+),and the unfavorable phase transitions that occur during the insertion and extraction of Na^(+).Here,we present a strategy to improve structural stability by incorporating cost-effective,robust Al-O bonds.This approach induces localized adjustments in the electronic structu re and a pinning effect,which limits the deformation of the transition metal(TM)layers,strengthens the electrostatic bonding within the TM layers,and expands the Na layer spacing.Consequently,the Na_(0.67)Fe_(0.4)Mn_(0.54)Al_(0.06)O_(2) cathode demonstrates a capacity of 168.8 mAh g^(-1) at 0.1 C,maintaining89.2%of its original capacity after 200 cycles at 1 C.Through in situ electrochemical impedance spectroscopy(EIS)with dynamic resistance transformation(DRT)analysis,ex situ X-ray absorption spectroscopy(XAS),and in situ X-ray diffraction(XRD),the study demonstrates a reduction in the J-T effect,enhanced kinetic performance,and the inhibition of detrimental phase transitions.This study offers new avenues to the development and design of future low-cost Fe/Mn-based cathodes.
基金funding from the National Natural Science Foundation of China(22378289)the Key Central Government Guides Local Funds for Science and Technology Development(YDZJSX2022A021)the special fund for Science and Technology Innovation Teams of Shanxi Province(202304051001026)。
文摘The oxygen evolution reaction(OER)suffers from sluggish kinetics,necessitating efficient electrocatalysts to reduce overpotentials in water splitting.Currently recognized OER mechanisms primarily include the adsorbate evolution mechanism(AEM),lattice oxygen mechanism(LOM),and oxide path mechanism(OPM).Compared to AEM,limited by scaling relationships,and LOM,constrained by stability issues,the OPM offers a promising alternative by enabling direct O-O bond formation via dual active sites,thus bypassing^(*)OOH intermediates and lattice O involvement and achieving a balance between activity and durability.However,activating the OPM process requires precise control over the spatial and electronic structure of active sites,making the design of OPM-based catalysts challenging.While previous reviews have focused on homo/heteronuclear diatomic perspectives of OPM-based catalysts,it is urgent to systematically summarize design strategies to provide a rational reference for their development.Herein,a review of design strategies for OPM-based OER catalysts across three scales is comprehensively presented,including in-situ engineering,doping-enabled sites reconstruction,and introducing new sites for nanoparticles,direct synthesis or post-treatments for molecular catalysts,and doping or template strategies for atom pairs or arrays.The unique advantage of atom arrays is also highlighted,and their future research directions and possible strategies are discussed.This review provides a systematic summary and forward-looking perspectives for rationally designing high-performance OPM-based OER catalysts.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(No.2023C01072)the Institute of Zhejiang University-Quzhou for their financial support。
文摘Poly(phenylene oxide)(PPO)exhibits excellent dielectric properties,making it an ideal substrate for high-frequency,high-speed copper-clad laminates.The phenolic hydroxyl group at the end of PPO plays a key role in its reactivity.Accurately quantifying the phenolic hydroxyl content in PPO is essential but challenging.In this study,we proposed a method for measuring the phenolic hydroxyl content of PPO using differential UV absorption spectroscopy.In alkaline solutions,the phenolic hydroxyl in PPO completely ionizes to form phenoxide ions,leading to a significant increase in UV absorbance at approximately 250 and 300 nm.Notably,the differential UV absorbance at approximately 300 nm was directly proportional to the phenolic hydroxyl concentration.Using 2,6-dimethylphenol as a standard,a calibration curve was established to relate the phenolic hydroxyl concentration to differential UV absorbance at approximately 300 nm,providing a precise and straightforward method for phenolic hydroxyl quantification in PPO with distinct advantages over conventional techniques.
基金supported by the National Key R&D Program of China(Grant Nos.U25A20810 and 2024YFF0508201)the National Natural Science Foundation of China(Grant No.12302504).
文摘In coal mining on a high-pressure Ordovician limestone aquifer,grouting materials should have sufficient mechanical properties,particularly strong interfacial bonding performance to address stress concentration at the grout-limestone interface induced by rock stress disturbances during mining.In this study,graphene oxide(GO)was integrated into cement-polyacrylate composite grout to improve its interfacial bonding.First,four-point bending tests were conducted,and the Monte Carlo method combined with the simplex search algorithm was employed to determine the variations in shear cohesion and static friction parameters.The results reveal that GO can significantly increase both the tensile and shear cohesion of the grout-limestone interface,but minimally affects the interfacial friction coefficient.Second,nuclear magnetic resonance(NMR)and scanning electron microscopy(SEM)tests were performed.The results indicate that GO nanosheets result in a squamaceous microstructure of the grout consolidation mass,increasing the adhesion of the grout-limestone interface.Moreover,spiny Aft(ettringite)clusters can be induced in limestone fracture surfaces by GO,which could serve as anchors for limestone and grout consolidation mass.
基金funding support from General Research Fund[Project No.14300525]from the Research Grants Council(RGC)of Hong Kong SAR,Chinafunding support from Natural Science Foundation of China(NSFC)Young Scientists Fund(Project No.22305203)+2 种基金NSFC Projects Nos.22309123,22422303,22303011,22033002,92261112 and U21A20328support from the Hong Kong Branch of National Precious Metals Material Engineering Research Center(NPMM)at City University of Hong Kongsupport from Young Collaborative Research Grant[Project No.C1003-23Y]support from RGC of Hong Kong SAR,China.
文摘Electrocatalytic nitric oxide(NO)reduction reaction(NORR)is a promising and sustainable process that can simultaneously realize green ammonia(NH3)synthesis and hazardous NO removal.However,current NORR performances are far from practical needs due to the lack of efficient electrocatalysts.Engineering the lattice of metal-based nanomaterials via phase control has emerged as an effective strategy to modulate their intrinsic electrocatalytic properties.Herein,we realize boron(B)-insertion-induced phase regulation of rhodium(Rh)nanocrystals to obtain amorphous Rh_(4)B nanoparticles(NPs)and hexagonal close-packed(hcp)RhB NPs through a facile wet-chemical method.A high Faradaic efficiency(92.1±1.2%)and NH_(3) yield rate(629.5±11.0μmol h^(−1) cm^(−2))are achieved over hcp RhB NPs,far superior to those of most reported NORR nanocatalysts.In situ spectro-electrochemical analysis and density functional theory simulations reveal that the excellent electrocatalytic performances of hcp RhB NPs are attributed to the upshift of d-band center,enhanced NO adsorption/activation profile,and greatly reduced energy barrier of the rate-determining step.A demonstrative Zn-NO battery is assembled using hcp RhB NPs as the cathode and delivers a peak power density of 4.33 mW cm−2,realizing simultaneous NO removal,NH3 synthesis,and electricity output.
基金supported by the National Natural Science Foundation of China(Nos.62104045,52101213)Jiangsu Provincial Department of Science and Technology of China(No.BE2022426).
文摘As the chemical industry expands,the use of benzene,toluene,and xylene(collectively known as BTX)in industrial production has increased greatly.Meanwhile,the toxic nature and potential health hazards of BTX gases cannot be ignored due to low-concentration leaks underline the critical need for rapid and real-time monitoring of these gases.Chemiresistive metal oxide semiconductor(MOS)-based gas sensors,which are extensively used for gas detection in both industrial settings and everyday life,emerge as one of the optimal solutions for trace BTX detection.These sensors are highly valued for their high sensitivity and low detection limits.Nevertheless,the improvement of selectivity towards specific BTX gases to achieve efficient and precise detection still remains challenging.This review summarizes the chemiresistive MOS-based gas sensors designed for BTX detection,categorizing them based on the components of sensing materials-basically into three groups:single-component,single heterojunction,and multiple heterojunctions gas sensing materials.Further,the review proposes the future application prospects of chemiresistive MOS-based BTX gas sensors,with specific emphasis on their significance in promoting industrial safety and environmental monitoring.
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
基金supported by the National Key R&D Program of China,Nos.2017YFA0104302(to NG and XM)and 2017YFA0104304(to BW and ZZ)
文摘Mesenchymal stromal cell transplantation is an effective and promising approach for treating various systemic and diffuse diseases.However,the biological characteristics of transplanted mesenchymal stromal cells in humans remain unclear,including cell viability,distribution,migration,and fate.Conventional cell tracing methods cannot be used in the clinic.The use of superparamagnetic iron oxide nanoparticles as contrast agents allows for the observation of transplanted cells using magnetic resonance imaging.In 2016,the National Medical Products Administration of China approved a new superparamagnetic iron oxide nanoparticle,Ruicun,for use as a contrast agent in clinical trials.In the present study,an acute hemi-transection spinal cord injury model was established in beagle dogs.The injury was then treated by transplantation of Ruicun-labeled mesenchymal stromal cells.The results indicated that Ruicunlabeled mesenchymal stromal cells repaired damaged spinal cord fibers and partially restored neurological function in animals with acute spinal cord injury.T2*-weighted imaging revealed low signal areas on both sides of the injured spinal cord.The results of quantitative susceptibility mapping with ultrashort echo time sequences indicated that Ruicun-labeled mesenchymal stromal cells persisted stably within the injured spinal cord for over 4 weeks.These findings suggest that magnetic resonance imaging has the potential to effectively track the migration of Ruicun-labeled mesenchymal stromal cells and assess their ability to repair spinal cord injury.
基金financially supported by the International Cooperation Program from the Ministry of Science and Technology of Hubei Province(No.2023EHA069)Shenzhen Science and Technology Program(No.JCYJ20230807143702005)National Foreign Experts Program(No.G2022027015L)。
文摘Magnetic resonance imaging(MRI)is one of the most widely used diagnostic techniques.Iron oxide nanoparticles,as a promising kind of contrast agents,have attracted intense research interest due to their low toxicity and superparamagnetism.However,it is still a great challenge to prepare ideal iron oxide based contrast agents with high uniformity,excellent water solubility and biocompatibility.In this paper,a novel water-soluble polymer ligand pentaerythritol tetrakis 3-mercaptopropionate-poly(N-vinyl-2-pyrrolidone)(PTMP-PVP)was used as a capping reagent to prepare iron oxide nanoparticles MIONs@PTMP-PVP through one-step co-precipitation of iron precursors in aqueous solution at 100℃.The obtained nanoparticles MIONs@PTMP-PVP had a small size and narrow size distribution,and they were found to be biocompatible as determined through CCK-8 assay and histology analysis.In vivo MRI study demonstrated that the obtained MIONs@PTMP-PVP can be potentially used as an effective T_(2)-weighted MRI contrast agent.
基金supported by the National Natural Science Foundation of China (No. 52374292)China Baowu Low Carbon Metallurgy Innovation Foundation, China (No. BWLCF202309)the Natural Science Foundation of Changsha City, China (No. KQ2208271)。
文摘Some active metal oxides(Al_(2)O_(3),TiO_(2),and Cr_(2)O_(3))were selected as dopants to the Al_(2)O_(3)-based ceramic shells for investment casting of K417G superalloy.The effects of dopant types and contents(0,2,5,and 8 wt.%)on the wettability and interfacial reaction between the alloy and shell were investigated by a sessile-drop experiment.The results show that increasing the Al_(2)O_(3) doping contents(0−8 wt.%)reduces the porosity(21.74%−10.08%)and roughness(3.22−1.34μm)of the shell surface.The increase in Cr_(2)O_(3) dopant content(2−8 wt.%)further exacerbates the interfacial reaction,leading to an increase in the thickness of the reaction layer(2.6−3.1μm)and a decrease in the wetting angle(93.9°−91.0°).The addition of Al_(2)O_(3) and TiO_(2) dopants leads to the formation of Al_(2)TiO_(5) composite oxides in the reaction products,which effectively inhibits the interfacial reaction.The increase in TiO_(2) dopant contents(0−8 wt.%)further promotes the formation of Al_(2)TiO_(5),which decreases the thickness of the interfacial reaction layer(3.9−1.2μm)and increases the wetting angle(95.0°−103.8°).The introduced dopants enhance the packing density of the shell surface,while simultaneously suppress the diffusion of active metal elements from the alloy matrix to the interface.
