The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was a...The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was analyzed using the first-order irreversible reaction,following the shrinking unreacted nucleus model.The results demonstrate that VTM pellets prepared with 3Co-binder exhibit a faster oxidation rate than those with F-binder across the temperatures ranging from 1073 to 1473 K.In both cases,the oxidation process was controlled by an interfacial chemical reaction during the pre-oxidation stage and by internal diffusion during the mid-oxidation stage.The type of binder did not influence the primary oxidation control mechanism of the VTM pellets.However,the apparent rate constants in the pre-oxidation stage and the internal diffusion coefficients in the mid-oxidation stage were higher for pellets with 3Co-binder compared to those with F-binder.The apparent activation energies for the 3Co-binder pellets were similar to those of bentonite,indicating favorable kinetic conditions without negative impacts on the oxidation process.Nonetheless,it is important to note that pellets with F-binder required a longer oxidation time than those with 3Co-binder.展开更多
The factors affecting the oxidation degree of vanadium–titanium magnetite (VTM) pellets were analyzed via the isothermal oxidation experiment. Furthermore, the oxidation kinetics of VTM pellets were explored through ...The factors affecting the oxidation degree of vanadium–titanium magnetite (VTM) pellets were analyzed via the isothermal oxidation experiment. Furthermore, the oxidation kinetics of VTM pellets were explored through linear fitting to the kinetic equations based on the shrinking unreacted-core model. The results reveal that VTM pellets undergo oxidation in three distinct phases: pre-oxidation, mid-oxidation, and final stable phase. Notably, the mid-oxidation phase is absent in magnetite oxidation. The shrinking unreacted-core model has been proven to be suitable for modeling the process of oxidizing VTM pellets. In the pre-oxidation stage, the rate-controlling step is determined by both the oxidation temperature and the effective oxygen concentration. The influence of the effective oxygen concentration on the rate of oxidation is more pronounced at temperatures between 1073 and 1273 K, especially when the oxygen content falls below 15 vol.%. For the production of oxidized VTM pellets, it is necessary to maintain a preheating temperature above 1173 K (to accelerate the oxidation reaction) and below 1473 K (to prevent the swift formation of compact Fe2TiO5 at the shell of the pellet) in an oxygen-enriched atmosphere.展开更多
In the range of 620？710 °C, air was blown into A356 aluminum alloy melt to produce aluminum foams. In order to study the influence of temperature on the thickness of oxide film on bubble surface, Auger electron ...In the range of 620？710 °C, air was blown into A356 aluminum alloy melt to produce aluminum foams. In order to study the influence of temperature on the thickness of oxide film on bubble surface, Auger electron spectroscopy （AES） was used. Based on the knowledge of corrosion science and hydrodynamics, two oxidation kinetics models of oxide film on bubble surface were established. The thicknesses of oxide films produced at different temperatures were predicted through those two models. Furthermore, the theoretical values were compared with the experimental values. The results indicate that in the range of 620？710 °C, the theoretical values of the thickness of oxide film predicted by the model including the rising process are higher than the experimental values. While, the theoretical values predicted by the model without the rising process are in good agreement with the experimental values, which shows this model objectively describes the oxidation process of oxide film on bubble surface. This work suggests that the oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process follows the Arrhenius equation.展开更多
The oxidation behaviors of AZ80,AZ8O-0.32 Y and AZ8O-0.38 Nd(wt.%)alloys were researched at 413℃,420℃,427v and 433℃for up to 6 h in air environment via a high precision analytical balance,a laser confocal microscop...The oxidation behaviors of AZ80,AZ8O-0.32 Y and AZ8O-0.38 Nd(wt.%)alloys were researched at 413℃,420℃,427v and 433℃for up to 6 h in air environment via a high precision analytical balance,a laser confocal microscope,differential scanning calorimeter(DSC)analysis,X-ray diffraction(XRD)analysis,scanning electron microscope(SEM)observation,and X-ray photoelectron spectroscopy(XPS)analysis.The results show that the weight gain and oxidation rate of AZ80 are reduced significantly,the initiation form and propagation of cracks in oxide layer are changed.Compact and protective oxide layer forms on alloy surface with Y or Nd addition.And the activation energies of AZ80,AZ80-0.32Y and AZ8O-0.38Nd alloys calculated via Arrhenius equation are 82.556 kJ/mol,177.148kJ/mol and 136.738 kJ/mol,respectively.展开更多
The oxidation kinetics and composition of oxide scales on low carbon steel （SPHC） were studied during i- sothermal oxidation. Thermogravimetric analyzer （TGA） was used to simulate isothermal oxidation process of S...The oxidation kinetics and composition of oxide scales on low carbon steel （SPHC） were studied during i- sothermal oxidation. Thermogravimetric analyzer （TGA） was used to simulate isothermal oxidation process of SPHC for 240 min under air condition, and the temperature range was from 500 to 900 ℃. Scanning electron microscope （SEM） was used to observe cross-sectional scale morphology and analyze composition distribution of oxide scales. The morphology of oxide scale was classical three-layer structure. Fe2 03 developed as whiskers at the outermost lay- er, and interlayer was perforated-plate Fe3 04 while innermost layer was pyramidal FeO. From the oxidation curves, the oxidation mass gain per unit area with time was of parabolic relation and oxidation rate slowed down. On the ba- sis of experimental data, the isothermal oxidation kinetics model was derived and oxidation activation energy of SPHC steel was 127. 416 kJ/mol calculated from kinetics data.展开更多
The non-isothermal oxidation experiments of ilmenite concentrate were carried out at various heating rates under air atmosphere by thermogravimetry.The oxidation kinetic model function and kinetic parameters of appare...The non-isothermal oxidation experiments of ilmenite concentrate were carried out at various heating rates under air atmosphere by thermogravimetry.The oxidation kinetic model function and kinetic parameters of apparent activation energy（Ea）were evaluated by Málek and Starink methods.The results show that under air atmosphere,the oxidation process of ilmenite concentrate is composed of three stages,and the chemical reaction（G（α）=1-（1-α）~2,whereαis the conversion degree）plays an important role in the whole oxidation process.At the first stage（α=0.05-0.30）,the oxidation process is controlled gradually by secondary chemical reaction with increasing conversion degree.At the second stage（α=0.30-0.50）,the oxidation process is completely controlled by the secondary chemical reaction（G（α）=1-（1-α）~2）.At the third stage（α=0.50-0.95）,the secondary chemical reaction weakens gradually with increasing conversion degree,and the oxidation process is controlled gradually by a variety of functions;the kinetic equations are G（α）=（1-α）^（-1）（β=10K·min^（-1）,whereβis heating rate）,G（α）=（1-α）^（-1/2）（β=15-20K·min^（-1））,and G（α）=（1-α）^（-2）（β=25K·min^（-1））,respectively.For the whole oxidation process,the activation energies follow a parabolic law with increasing conversion degree,and the average activation energy is 160.56kJ·mol^（-1）.展开更多
In order to establish the kinetics of oxidation of artificial magnetite pellets,we comprehensively studied kinetics of the oxidation of artificial magnetite pellets from low temperature to high temperature using chemi...In order to establish the kinetics of oxidation of artificial magnetite pellets,we comprehensively studied kinetics of the oxidation of artificial magnetite pellets from low temperature to high temperature using chemical analysis.The results show that when the oxidation temperature is below 1073 K(800℃),the reaction is controlled by the step of internal diffusion,and the model function is 23 G(a)=1-3(1-x)^(2/3)+2(1-x)(α,reaction degree).When the temperature is above 1073 K(800℃),the reaction mechanism was chemical reaction,and the model function is 13 G(a)=1-(1-x)^(1/3).The apparent activation energy for the oxidation of artificial magnetite pellets was also determined,which was 8.90 kJ/mol for the low temperature and 67.79 kJ/mol for the high temperature.Based on the derived kinetic equation for the oxidation of artificial magnetite pellets,the calculated value is consistent with the experimental data.Compared with that of nature magnetite pellets,the apparent activation energy is decreased obviously,which indicates that the artificial magnetite pellets are oxidized more easily than nature magnetite pellets.展开更多
Supercritical water oxidation （SCWO） has been drawing much attention due to effectively destroy a large variety of high-risk wastes resulting from munitions demilitarization and complex industrial chemical. An impor...Supercritical water oxidation （SCWO） has been drawing much attention due to effectively destroy a large variety of high-risk wastes resulting from munitions demilitarization and complex industrial chemical. An important design consideration in the development of supercritical water oxidation is the information of decomposition rate. In this paper, the decomposition rate of dimethyl methylphosphonate（DMMP）, which is similar to the nerve agent VX and GB（Sarin） in its structure, was investigated under SCWO conditions. The experiments were performed in an isothermal tubular reactor with a H2O2 as an oxidant. The reaction temperatures were ranged from 398 to 633℃ at a fixed pressure of 24 MPa. The conversion of DMMP was monitored by analyzing total organic carbon （TOC） on the liquid effluent samples. It is found that the oxidative decomposition of DMMP proceeded rapidly and a high TOC decomposition up to 99.99% was obtained within 11 s at 555℃. On the basis of data derived from experiments, a global kinetic equation for the decomposition of DMMP was developed. The model predictions agreed well with the experimental data.展开更多
The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry(DSC)and thermogravimetry(TG).The oxidation pathway of titania slag powder in air was divided into...The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry(DSC)and thermogravimetry(TG).The oxidation pathway of titania slag powder in air was divided into three stages according to their three exothermic peaks and three corresponding mass gain stages indicated by the respective non-isothermal DSC and TG curves.The isothermal oxidation kinetics of high titania slag powders of different sizes were analyzed using the ln-ln analysis method.The results revealed that the entire isothermal oxidation process comprises two stages.The kinetic mechanism of the first stage can be described as f(α) = 1.77(1-α) [-ln (1-α)]^((1.77-1)/1.77),f(α)= 1.97(1-α) [-ln (1-α)]^((1.97-1)/1.97),and f (α) = 1.18(1-α) [-ln (1-α)]^((1.18-1)/1.18).The kinetic mechanism of the second stage for all samples can be described as f (α)=1.5(1-α)^(2/3)[1-(1-α)^(1/3)]^(-1).The activation energies of titania slag powders with different sizes(d_(1)<0.075 mm,0.125 mm<d_(2)<0.150 mm,and 0.425 mm<d_(3)<0.600 mm)for different reaction degrees were calculated.For the given experimental conditions,the rate-controlling step in the first oxidation stage of all the samples is a chemical reaction.The rate-controlling steps of the second oxidation stage are a chemical reaction and internal diffusion(for powders d_(1)<0.075 mm)and internal diffusion(for powders 0.125 mm<d_(2)<0.150 mm and 0.425 mm<d_(3)<0.600 mm).展开更多
1.IntroductionThe research of the TD1 and TD2 al-loys based on intermetallic compound TiAl,which possesses high temperature capabilityfrom 650 to 700℃ was conducted.However,the limitation used at high temperature isi...1.IntroductionThe research of the TD1 and TD2 al-loys based on intermetallic compound TiAl,which possesses high temperature capabilityfrom 650 to 700℃ was conducted.However,the limitation used at high temperature isimposed by oxidation and degradation ofcreep strength,and relatively little know-展开更多
Non-isothermal kinetic research has been carried out on oxidation behavior of β-Sialon in diphaseβ-Sialon/Al_2O_3 composite at high temperatures. A kinetic formula is established for non-isothermal oxidation process...Non-isothermal kinetic research has been carried out on oxidation behavior of β-Sialon in diphaseβ-Sialon/Al_2O_3 composite at high temperatures. A kinetic formula is established for non-isothermal oxidation process of β-Sialon. The rate of oxidation process is controlled by chemicalreaction at the initial stage and then by diffusion. The apparent activation energies and appar-ent rate constants at different temperatures are determined by treating TG data of the overallprocess.展开更多
MnO_x-CeO_2 catalysts were synthesized to investigate the active sites for NO oxidation by varying the calcination temperature. XRD and TEM results showed that cubic CeO_2 and amorphous MnO_x existed in MnO_x-CeO_2 ca...MnO_x-CeO_2 catalysts were synthesized to investigate the active sites for NO oxidation by varying the calcination temperature. XRD and TEM results showed that cubic CeO_2 and amorphous MnO_x existed in MnO_x-CeO_2 catalysts. High temperature calcination caused the sintering of amorphous MnO_x and transforming to bulk crystalline Mn_2O_3, H_2-TPR and XPS results suggested the valence of Mn in MnO_x-CeO_2 was higher than pure MnO_x, and decreased with the increasing calcination temperature, The turnover frequency（TOF） was calculated based on the initial reducibility according to H_2-TPR quantitation and kinetic study. The TOF results indicated that the initial reducibility of amorphous MnO_x with high valence manganese ions was equivalent to the active sites for NO oxidation. It can be inferred that the amorphous MnO_x plays a key role in low-temperature NO oxidation.展开更多
The kinetics of oxidation of pyruvate by diperiodatoargentate( III) ion (DPA) has been studied spec-trophotometrically in alkaline medium. It was found that the reaction order with respect to both DPA and pyruvate is ...The kinetics of oxidation of pyruvate by diperiodatoargentate( III) ion (DPA) has been studied spec-trophotometrically in alkaline medium. It was found that the reaction order with respect to both DPA and pyruvate is unity and the rate equation can be expressed asThe rate increases with the increase in [OH ] and decreases with the increase in [periodate]. There is a positive ionic strength effect in this reaction system. A mechanism has been proposed to explain the experimental results. The observed activation parameters are presented.展开更多
In coal mining areas,the ambient atmospheric and aqueous oxidation of pyrite minerals(FeS2)associated with coal as well as the other accompanying strata is significant in understanding the extent of acid mine drainage...In coal mining areas,the ambient atmospheric and aqueous oxidation of pyrite minerals(FeS2)associated with coal as well as the other accompanying strata is significant in understanding the extent of acid mine drainage(AMD),the cause of severe environmental pollution.Therefore,in this paper,the oxidation kinetics of the coal-associated pyrite(CAPy)present in a coal sample(TpHM1)has been studied via aqueous leaching depyritization experiments at variety of temperatures and time intervals without the incorporation of any oxidizer.The outcomes obtained are juxtaposed with the standard pyrite mineral(SPM)oxidation at the same experimental conditions.Also,the coal and SPM slurry residues and filtrates obtained after aqueous leaching at 25℃ and 90℃ for 0 h and 24 h,respectively,were extensively analyzed through high-resolution transmission electron microscopy(HR-TEM),Powder X-ray diffraction(P-XRD),and X-ray-photoelectron spectroscopy(XPS)for evaluation of the mineralogical composition and proportions of iron and sulfur components during progression of the oxidation reaction.Both the reactions obey pseudo first-order kinetics during pyrite(FeS_(2))oxidation but a significant difference in the experimentally found activation energies(E_(a))and rate constants(k)values of oxidation kinetics of both CAPy and SPM may be attributed to the varied geochemical compositions of the coal associated pyrite(CAPy).The rate constant for CAPy is much greater than that of SPM implying a higher Ea around 10.838 kJ/mol for SPM as compared to 1.941 kJ/mol for CAPy.The CAPy in coal(TpHM1)is more susceptible to atmospheric oxidation than that of SPM,leading to the formation of acid mine drainage with lower pH.In this paper,the pH values on the basis of stoichiometric pyrite oxidation reaction were calculated and compared with the pH values obtained after aqueous leaching of CAPy to interpret the extent of acid formation and pyrite dissolution.Hence,with the assistance of the current study,further studies on the effects of mineral impurities,whereabouts of pyrite minerals in coal seams,the significance of compositional differences in the CAPy,the effect of metal oxides,and the role of alkalinity producing neutralizing agents of coal in the oxidative dissolution process of pyrite can be investigated.展开更多
α-Bi2O3 powders were prepared from nanometer Bi powders through low-temperature oxidation at less than 873.15 K. XRD, SEM, TEM and HRTEM were used to characterize the structure and morphology of Bi powders and Bi2O3 ...α-Bi2O3 powders were prepared from nanometer Bi powders through low-temperature oxidation at less than 873.15 K. XRD, SEM, TEM and HRTEM were used to characterize the structure and morphology of Bi powders and Bi2O3 particles. Kinetic studies on the bismuth oxidation at low-temperatures were carried out by TGA method. The results show that bismuth beads should be reunited and oxidized to become irregular Bi2O3 powders. The bismuth oxidation follows shrinking core model, and its controlling mechanism varies at different reaction time. Within 0-10 min, the kinetics is controlled by chemical reaction, after that it is controlled by O2 diffusion in the solid α-Bi2O3 layer. The apparent activation energy is determined as 55.19 kJ/mol in liquid-phase oxidation.展开更多
By means of isothermal oxidation and chemical analysis, great importance was attached to the parameters that made effects on the oxidation degree of vanadium, titanium-bearing magnetite pellet in high-temperature proc...By means of isothermal oxidation and chemical analysis, great importance was attached to the parameters that made effects on the oxidation degree of vanadium, titanium-bearing magnetite pellet in high-temperature processing （1 073- 1 323 K）. Based on the experimental data, oxidation kinetics of pellet was analyzed according to shrinking unreacted-core model subsequently. Experiment results display that the oxidation degree of pellet increases with increasing of oxidation time, oxidation temperature and oxygen content, as well as shrinking of pellet diameter. Under the condition of oxidation time 20 min, oxidation temperature 1223 K, oxygen content 15%, and pellet diameter 12 mm, oxidation degree of pellet reaches 92.92%. The analysis of oxidation kinetics indicates that oxidation process of pellet is controlled by chemical reaction with activation energy 68.64 kJ/mol at a relatively lower temperature （1073-1 173 K）. Oxidation process of pellet is mixed-controlled by chemistry reaction and diffusion with activation energy 39.66 kJ/mol in the temperature range of 1 173-1 273 K. When oxidation temperature is higher than 1 273 K, the limited link of oxidation reaction is the diffusion control with the activation energy 20.85 kJ/mol. These results can serve as a reference to the production of vanadium, titanium-hearing magnetite pellet.展开更多
Nb-Ti-Si-based ultrahigh-temperature alloys concocted with boron ranging from 0 to 2 at% are prepared by arc-melting technology. The effects of adding boron on their as-melted microstructure and oxidation resistance a...Nb-Ti-Si-based ultrahigh-temperature alloys concocted with boron ranging from 0 to 2 at% are prepared by arc-melting technology. The effects of adding boron on their as-melted microstructure and oxidation resistance are analyzed. The （Nb,Ti）ss, β-（Nb,Ti）5Si3 and γ-（Nb,Ti）5Si3 exist in Nb-22Ti-16Si-6Cr-3Al-4Hf alloy, while （Nb,Ti）ss, α-（Nb,Ti）5Si3 and γ-（Nb,Ti）5Si3 are present in Nb-22Ti-16Si-6Cr-3Al-4Hf-lB and Nb-22Ti-16Si-6Cr-3Al-4Hf-2B alloys. The oxidation of Nb-Ti-Si-based ultrahigh-temperature alloys is dominated by the diffusion of oxygen through （Nb,Ti）ss. Compared to boron-free alloys, the boron-containing alloys have significantly lower oxidation rate when oxidized at 1 200 ℃ for less than 50 h, but, for more than 50 h, their oxidation resistance deteriorates.展开更多
A high thrust-to-weight ratio poses challenges to the high-temperature performance of Ni-based superalloys. The oxidation behavior of GH4738 at extreme temperatures has been investigated by isothermal and non-isotherm...A high thrust-to-weight ratio poses challenges to the high-temperature performance of Ni-based superalloys. The oxidation behavior of GH4738 at extreme temperatures has been investigated by isothermal and non-isothermal experiments. As a result of the competitive diffusion of alloying elements, the oxide scale included an outermost porous oxide layer (OOL), an inner relatively dense oxide layer (IOL), and an internal oxide zone (IOZ), depending on the temperature and time. A high temperature led to the formation of large voids at the IOL/IOZ interface. At 1200℃, the continuity of the Cr-rich oxide layer in the IOL was destroyed, and thus, spallation occurred. Extension of oxidation time contributed to the size of Al-rich oxide particles with the increase in the IOZ. Based on this finding,the oxidation kinetics of GH4738 was discussed, and the corresponding oxidation behavior at 900-1100℃ was predicted.展开更多
In this paper, the isothermal oxidation kinetics and oxidation behavior of GH586 superalloy from 800 to 1000℃ were investigated. The oxide scale morphologies of the surfaces and the cross sections after oxidation wer...In this paper, the isothermal oxidation kinetics and oxidation behavior of GH586 superalloy from 800 to 1000℃ were investigated. The oxide scale morphologies of the surfaces and the cross sections after oxidation were characterized by means of X-ray diffraction （XRD） and scanning electron microscope （SEM） equipped with energy-dispersive spectroscopy （EDS）. The results show that the growth of the oxide scales on the surface of superalloy GH586 obeys a parabolic law with the activa- tion energy of 241.4 kJ.mo1-1 from 800 to 1000℃ The dense oxide scale formed at 800℃ is mainly composed of Cr203, NiCr204 and a small amount of TiO2. At 900℃, the oxide scale is divided into two layers： the outer layer with multiple cracks is mainly composed of ＂Cr203 and TiO2, while the inner is a layer of dense Cr203. Under the oxide scale, aluminum-rich oxides along the grain bound- aries are generated by the internal oxidation. At 1000 ℃for 100 h, cracks throughout the whole oxide film accel- erate the oxidation rate of Ni-based superalloy GH586 and large blocks of TiO2 in the oxide scale are generated, resulting in the spallation of oxide scale.展开更多
In order to figure out the oxidation behavior of steels during heating,five micro-alloyed steels were subjected to continuous and isothermal oxidation using the thermo gravimetric analyzer and the Gleeble-3500thermo-m...In order to figure out the oxidation behavior of steels during heating,five micro-alloyed steels were subjected to continuous and isothermal oxidation using the thermo gravimetric analyzer and the Gleeble-3500thermo-mechanical simulator.The microstructure of oxide scales,especially the thickness fractions of Fe2O3,Fe3O4 and FeO layers,was analyzed using the scanning electron microscope（SEM）,electron probe microanalyzer（EPMA）and electron backscattered diffraction（EBSD）techniques.The micro-alloyed steels containing alloying elements（Si,Cr,Ni and Cu）show a higher oxidation resistance compared with the low carbon steel.It is found that alloying elements accumulated at scale/substrate interface during high temperature oxidation.Alloying elements function in two ways in the oxidation of steels：one is enhancing the scale/substrate interface and consequently suppressing the blister of scales;and the other is impeding the outward diffusion of iron cations from substrate to scales,resulting in the decrease of oxidation rate.As the diffusion of iron cations is impeded,the thickness fractions of Fe2O3 and Fe3O4of micro-alloyed steels are more than those of low carbon steels.展开更多
基金supported by National Natural Science Foundation of China(No.52204302)Young Elite Scientist Sponsorship Program by CAST(No.YESS20220533)Hunan Provincial Natural Science Foundation of China(No.2022JJ40625).
文摘The isothermal oxidation kinetics of vanadium–titanium magnetite(VTM)pellets prepared with 3Co-binder(coal-based colloidal composite binder)and F-binder(pulverized Funa binder)are compared.The oxidation process was analyzed using the first-order irreversible reaction,following the shrinking unreacted nucleus model.The results demonstrate that VTM pellets prepared with 3Co-binder exhibit a faster oxidation rate than those with F-binder across the temperatures ranging from 1073 to 1473 K.In both cases,the oxidation process was controlled by an interfacial chemical reaction during the pre-oxidation stage and by internal diffusion during the mid-oxidation stage.The type of binder did not influence the primary oxidation control mechanism of the VTM pellets.However,the apparent rate constants in the pre-oxidation stage and the internal diffusion coefficients in the mid-oxidation stage were higher for pellets with 3Co-binder compared to those with F-binder.The apparent activation energies for the 3Co-binder pellets were similar to those of bentonite,indicating favorable kinetic conditions without negative impacts on the oxidation process.Nonetheless,it is important to note that pellets with F-binder required a longer oxidation time than those with 3Co-binder.
基金supported by the National Natural Science Foundation of China(No.52204302)Young Elite Scientist Sponsorship Program by CAST(No.YESS20220533)+1 种基金Hunan Provincial Natural Science Foundation of China(No.2022JJ50274)China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202103).
文摘The factors affecting the oxidation degree of vanadium–titanium magnetite (VTM) pellets were analyzed via the isothermal oxidation experiment. Furthermore, the oxidation kinetics of VTM pellets were explored through linear fitting to the kinetic equations based on the shrinking unreacted-core model. The results reveal that VTM pellets undergo oxidation in three distinct phases: pre-oxidation, mid-oxidation, and final stable phase. Notably, the mid-oxidation phase is absent in magnetite oxidation. The shrinking unreacted-core model has been proven to be suitable for modeling the process of oxidizing VTM pellets. In the pre-oxidation stage, the rate-controlling step is determined by both the oxidation temperature and the effective oxygen concentration. The influence of the effective oxygen concentration on the rate of oxidation is more pronounced at temperatures between 1073 and 1273 K, especially when the oxygen content falls below 15 vol.%. For the production of oxidized VTM pellets, it is necessary to maintain a preheating temperature above 1173 K (to accelerate the oxidation reaction) and below 1473 K (to prevent the swift formation of compact Fe2TiO5 at the shell of the pellet) in an oxygen-enriched atmosphere.
基金Project(51371104)supported by the National Nature Science Foundation of China
文摘In the range of 620？710 °C, air was blown into A356 aluminum alloy melt to produce aluminum foams. In order to study the influence of temperature on the thickness of oxide film on bubble surface, Auger electron spectroscopy （AES） was used. Based on the knowledge of corrosion science and hydrodynamics, two oxidation kinetics models of oxide film on bubble surface were established. The thicknesses of oxide films produced at different temperatures were predicted through those two models. Furthermore, the theoretical values were compared with the experimental values. The results indicate that in the range of 620？710 °C, the theoretical values of the thickness of oxide film predicted by the model including the rising process are higher than the experimental values. While, the theoretical values predicted by the model without the rising process are in good agreement with the experimental values, which shows this model objectively describes the oxidation process of oxide film on bubble surface. This work suggests that the oxidation kinetics of oxide film on bubble surface of aluminum foams produced by gas injection foaming process follows the Arrhenius equation.
基金the National Key Research and Development Program of China(No.2016YFB0301104)Nation Natural Science Foundation of China(No.51771043)Foundation of State Key Laboratory of Baiyunobo Rare Earth researches and Comprehensive Utilization,and Programme of Introducing Talents of Discipline Innovation to Universities 2.0(the 111 Project 2.0 of China,No.BP0719037).
文摘The oxidation behaviors of AZ80,AZ8O-0.32 Y and AZ8O-0.38 Nd(wt.%)alloys were researched at 413℃,420℃,427v and 433℃for up to 6 h in air environment via a high precision analytical balance,a laser confocal microscope,differential scanning calorimeter(DSC)analysis,X-ray diffraction(XRD)analysis,scanning electron microscope(SEM)observation,and X-ray photoelectron spectroscopy(XPS)analysis.The results show that the weight gain and oxidation rate of AZ80 are reduced significantly,the initiation form and propagation of cracks in oxide layer are changed.Compact and protective oxide layer forms on alloy surface with Y or Nd addition.And the activation energies of AZ80,AZ80-0.32Y and AZ8O-0.38Nd alloys calculated via Arrhenius equation are 82.556 kJ/mol,177.148kJ/mol and 136.738 kJ/mol,respectively.
基金Sponsored by National Natural Science Foundation of China(51204047)National Key Technology Research and Development Program in 12th Five-year Plan of China(2011BAE13B04)The Fundamental Research Funds for the Central Universities of China(N100307006)
文摘The oxidation kinetics and composition of oxide scales on low carbon steel （SPHC） were studied during i- sothermal oxidation. Thermogravimetric analyzer （TGA） was used to simulate isothermal oxidation process of SPHC for 240 min under air condition, and the temperature range was from 500 to 900 ℃. Scanning electron microscope （SEM） was used to observe cross-sectional scale morphology and analyze composition distribution of oxide scales. The morphology of oxide scale was classical three-layer structure. Fe2 03 developed as whiskers at the outermost lay- er, and interlayer was perforated-plate Fe3 04 while innermost layer was pyramidal FeO. From the oxidation curves, the oxidation mass gain per unit area with time was of parabolic relation and oxidation rate slowed down. On the ba- sis of experimental data, the isothermal oxidation kinetics model was derived and oxidation activation energy of SPHC steel was 127. 416 kJ/mol calculated from kinetics data.
基金supported by the National Natural Science Foundation of China(Grant No.51234010)Special Fund for Basic Scientific Research in Colleges and Universities of the Central Business (No.0903005203413)
文摘The non-isothermal oxidation experiments of ilmenite concentrate were carried out at various heating rates under air atmosphere by thermogravimetry.The oxidation kinetic model function and kinetic parameters of apparent activation energy（Ea）were evaluated by Málek and Starink methods.The results show that under air atmosphere,the oxidation process of ilmenite concentrate is composed of three stages,and the chemical reaction（G（α）=1-（1-α）~2,whereαis the conversion degree）plays an important role in the whole oxidation process.At the first stage（α=0.05-0.30）,the oxidation process is controlled gradually by secondary chemical reaction with increasing conversion degree.At the second stage（α=0.30-0.50）,the oxidation process is completely controlled by the secondary chemical reaction（G（α）=1-（1-α）~2）.At the third stage（α=0.50-0.95）,the secondary chemical reaction weakens gradually with increasing conversion degree,and the oxidation process is controlled gradually by a variety of functions;the kinetic equations are G（α）=（1-α）^（-1）（β=10K·min^（-1）,whereβis heating rate）,G（α）=（1-α）^（-1/2）（β=15-20K·min^（-1））,and G（α）=（1-α）^（-2）（β=25K·min^（-1））,respectively.For the whole oxidation process,the activation energies follow a parabolic law with increasing conversion degree,and the average activation energy is 160.56kJ·mol^（-1）.
基金Funded by the National Natural Science Foundation of China(51474161)
文摘In order to establish the kinetics of oxidation of artificial magnetite pellets,we comprehensively studied kinetics of the oxidation of artificial magnetite pellets from low temperature to high temperature using chemical analysis.The results show that when the oxidation temperature is below 1073 K(800℃),the reaction is controlled by the step of internal diffusion,and the model function is 23 G(a)=1-3(1-x)^(2/3)+2(1-x)(α,reaction degree).When the temperature is above 1073 K(800℃),the reaction mechanism was chemical reaction,and the model function is 13 G(a)=1-(1-x)^(1/3).The apparent activation energy for the oxidation of artificial magnetite pellets was also determined,which was 8.90 kJ/mol for the low temperature and 67.79 kJ/mol for the high temperature.Based on the derived kinetic equation for the oxidation of artificial magnetite pellets,the calculated value is consistent with the experimental data.Compared with that of nature magnetite pellets,the apparent activation energy is decreased obviously,which indicates that the artificial magnetite pellets are oxidized more easily than nature magnetite pellets.
文摘Supercritical water oxidation （SCWO） has been drawing much attention due to effectively destroy a large variety of high-risk wastes resulting from munitions demilitarization and complex industrial chemical. An important design consideration in the development of supercritical water oxidation is the information of decomposition rate. In this paper, the decomposition rate of dimethyl methylphosphonate（DMMP）, which is similar to the nerve agent VX and GB（Sarin） in its structure, was investigated under SCWO conditions. The experiments were performed in an isothermal tubular reactor with a H2O2 as an oxidant. The reaction temperatures were ranged from 398 to 633℃ at a fixed pressure of 24 MPa. The conversion of DMMP was monitored by analyzing total organic carbon （TOC） on the liquid effluent samples. It is found that the oxidative decomposition of DMMP proceeded rapidly and a high TOC decomposition up to 99.99% was obtained within 11 s at 555℃. On the basis of data derived from experiments, a global kinetic equation for the decomposition of DMMP was developed. The model predictions agreed well with the experimental data.
基金This work was financially supported by the National Key Research and Development Program of China(No.2018YFC1900500)Graduate Research and Innovation Foundation of Chongqing,China(No.CYB17002).
文摘The oxidation pathway and kinetics of titania slag powders in air were analyzed using differential scanning calorimetry(DSC)and thermogravimetry(TG).The oxidation pathway of titania slag powder in air was divided into three stages according to their three exothermic peaks and three corresponding mass gain stages indicated by the respective non-isothermal DSC and TG curves.The isothermal oxidation kinetics of high titania slag powders of different sizes were analyzed using the ln-ln analysis method.The results revealed that the entire isothermal oxidation process comprises two stages.The kinetic mechanism of the first stage can be described as f(α) = 1.77(1-α) [-ln (1-α)]^((1.77-1)/1.77),f(α)= 1.97(1-α) [-ln (1-α)]^((1.97-1)/1.97),and f (α) = 1.18(1-α) [-ln (1-α)]^((1.18-1)/1.18).The kinetic mechanism of the second stage for all samples can be described as f (α)=1.5(1-α)^(2/3)[1-(1-α)^(1/3)]^(-1).The activation energies of titania slag powders with different sizes(d_(1)<0.075 mm,0.125 mm<d_(2)<0.150 mm,and 0.425 mm<d_(3)<0.600 mm)for different reaction degrees were calculated.For the given experimental conditions,the rate-controlling step in the first oxidation stage of all the samples is a chemical reaction.The rate-controlling steps of the second oxidation stage are a chemical reaction and internal diffusion(for powders d_(1)<0.075 mm)and internal diffusion(for powders 0.125 mm<d_(2)<0.150 mm and 0.425 mm<d_(3)<0.600 mm).
文摘1.IntroductionThe research of the TD1 and TD2 al-loys based on intermetallic compound TiAl,which possesses high temperature capabilityfrom 650 to 700℃ was conducted.However,the limitation used at high temperature isimposed by oxidation and degradation ofcreep strength,and relatively little know-
文摘Non-isothermal kinetic research has been carried out on oxidation behavior of β-Sialon in diphaseβ-Sialon/Al_2O_3 composite at high temperatures. A kinetic formula is established for non-isothermal oxidation process of β-Sialon. The rate of oxidation process is controlled by chemicalreaction at the initial stage and then by diffusion. The apparent activation energies and appar-ent rate constants at different temperatures are determined by treating TG data of the overallprocess.
基金Project supported by the National key research and development program(2016YFC0204901)the National Natural Science Foundation of China(21576207)the introduction of talent and technology cooperation plan of Tianjin(14RCGFGX00849)
文摘MnO_x-CeO_2 catalysts were synthesized to investigate the active sites for NO oxidation by varying the calcination temperature. XRD and TEM results showed that cubic CeO_2 and amorphous MnO_x existed in MnO_x-CeO_2 catalysts. High temperature calcination caused the sintering of amorphous MnO_x and transforming to bulk crystalline Mn_2O_3, H_2-TPR and XPS results suggested the valence of Mn in MnO_x-CeO_2 was higher than pure MnO_x, and decreased with the increasing calcination temperature, The turnover frequency（TOF） was calculated based on the initial reducibility according to H_2-TPR quantitation and kinetic study. The TOF results indicated that the initial reducibility of amorphous MnO_x with high valence manganese ions was equivalent to the active sites for NO oxidation. It can be inferred that the amorphous MnO_x plays a key role in low-temperature NO oxidation.
文摘The kinetics of oxidation of pyruvate by diperiodatoargentate( III) ion (DPA) has been studied spec-trophotometrically in alkaline medium. It was found that the reaction order with respect to both DPA and pyruvate is unity and the rate equation can be expressed asThe rate increases with the increase in [OH ] and decreases with the increase in [periodate]. There is a positive ionic strength effect in this reaction system. A mechanism has been proposed to explain the experimental results. The observed activation parameters are presented.
基金Ministry of Earth Science(Govt.of India)(GPP-0364).
文摘In coal mining areas,the ambient atmospheric and aqueous oxidation of pyrite minerals(FeS2)associated with coal as well as the other accompanying strata is significant in understanding the extent of acid mine drainage(AMD),the cause of severe environmental pollution.Therefore,in this paper,the oxidation kinetics of the coal-associated pyrite(CAPy)present in a coal sample(TpHM1)has been studied via aqueous leaching depyritization experiments at variety of temperatures and time intervals without the incorporation of any oxidizer.The outcomes obtained are juxtaposed with the standard pyrite mineral(SPM)oxidation at the same experimental conditions.Also,the coal and SPM slurry residues and filtrates obtained after aqueous leaching at 25℃ and 90℃ for 0 h and 24 h,respectively,were extensively analyzed through high-resolution transmission electron microscopy(HR-TEM),Powder X-ray diffraction(P-XRD),and X-ray-photoelectron spectroscopy(XPS)for evaluation of the mineralogical composition and proportions of iron and sulfur components during progression of the oxidation reaction.Both the reactions obey pseudo first-order kinetics during pyrite(FeS_(2))oxidation but a significant difference in the experimentally found activation energies(E_(a))and rate constants(k)values of oxidation kinetics of both CAPy and SPM may be attributed to the varied geochemical compositions of the coal associated pyrite(CAPy).The rate constant for CAPy is much greater than that of SPM implying a higher Ea around 10.838 kJ/mol for SPM as compared to 1.941 kJ/mol for CAPy.The CAPy in coal(TpHM1)is more susceptible to atmospheric oxidation than that of SPM,leading to the formation of acid mine drainage with lower pH.In this paper,the pH values on the basis of stoichiometric pyrite oxidation reaction were calculated and compared with the pH values obtained after aqueous leaching of CAPy to interpret the extent of acid formation and pyrite dissolution.Hence,with the assistance of the current study,further studies on the effects of mineral impurities,whereabouts of pyrite minerals in coal seams,the significance of compositional differences in the CAPy,the effect of metal oxides,and the role of alkalinity producing neutralizing agents of coal in the oxidative dissolution process of pyrite can be investigated.
基金Project (2006BAB02B05-04- 01/02) supported by the National Key Technologies R&D Program of China
文摘α-Bi2O3 powders were prepared from nanometer Bi powders through low-temperature oxidation at less than 873.15 K. XRD, SEM, TEM and HRTEM were used to characterize the structure and morphology of Bi powders and Bi2O3 particles. Kinetic studies on the bismuth oxidation at low-temperatures were carried out by TGA method. The results show that bismuth beads should be reunited and oxidized to become irregular Bi2O3 powders. The bismuth oxidation follows shrinking core model, and its controlling mechanism varies at different reaction time. Within 0-10 min, the kinetics is controlled by chemical reaction, after that it is controlled by O2 diffusion in the solid α-Bi2O3 layer. The apparent activation energy is determined as 55.19 kJ/mol in liquid-phase oxidation.
基金Item Sponsored by National Science Fund for Distinguished Young Scholars of China(50725416)National Natural Science Foundation of China(50804059)+1 种基金National Key Programof Science and Technology of China(2008BAB32B06)Graduate Degree Thesis Innovation Foundation of Hunan Province and Central South University of China(1960-71131100053)
文摘By means of isothermal oxidation and chemical analysis, great importance was attached to the parameters that made effects on the oxidation degree of vanadium, titanium-bearing magnetite pellet in high-temperature processing （1 073- 1 323 K）. Based on the experimental data, oxidation kinetics of pellet was analyzed according to shrinking unreacted-core model subsequently. Experiment results display that the oxidation degree of pellet increases with increasing of oxidation time, oxidation temperature and oxygen content, as well as shrinking of pellet diameter. Under the condition of oxidation time 20 min, oxidation temperature 1223 K, oxygen content 15%, and pellet diameter 12 mm, oxidation degree of pellet reaches 92.92%. The analysis of oxidation kinetics indicates that oxidation process of pellet is controlled by chemical reaction with activation energy 68.64 kJ/mol at a relatively lower temperature （1073-1 173 K）. Oxidation process of pellet is mixed-controlled by chemistry reaction and diffusion with activation energy 39.66 kJ/mol in the temperature range of 1 173-1 273 K. When oxidation temperature is higher than 1 273 K, the limited link of oxidation reaction is the diffusion control with the activation energy 20.85 kJ/mol. These results can serve as a reference to the production of vanadium, titanium-hearing magnetite pellet.
基金Foundation item： National Natural Science Foundation of China （50671081）
文摘Nb-Ti-Si-based ultrahigh-temperature alloys concocted with boron ranging from 0 to 2 at% are prepared by arc-melting technology. The effects of adding boron on their as-melted microstructure and oxidation resistance are analyzed. The （Nb,Ti）ss, β-（Nb,Ti）5Si3 and γ-（Nb,Ti）5Si3 exist in Nb-22Ti-16Si-6Cr-3Al-4Hf alloy, while （Nb,Ti）ss, α-（Nb,Ti）5Si3 and γ-（Nb,Ti）5Si3 are present in Nb-22Ti-16Si-6Cr-3Al-4Hf-lB and Nb-22Ti-16Si-6Cr-3Al-4Hf-2B alloys. The oxidation of Nb-Ti-Si-based ultrahigh-temperature alloys is dominated by the diffusion of oxygen through （Nb,Ti）ss. Compared to boron-free alloys, the boron-containing alloys have significantly lower oxidation rate when oxidized at 1 200 ℃ for less than 50 h, but, for more than 50 h, their oxidation resistance deteriorates.
基金financially supported by the National Key R&D Program of China (No.2021YFB3700400)the National Natural Science Foundation of China (Nos.52074030,51904021,and 52174294)。
文摘A high thrust-to-weight ratio poses challenges to the high-temperature performance of Ni-based superalloys. The oxidation behavior of GH4738 at extreme temperatures has been investigated by isothermal and non-isothermal experiments. As a result of the competitive diffusion of alloying elements, the oxide scale included an outermost porous oxide layer (OOL), an inner relatively dense oxide layer (IOL), and an internal oxide zone (IOZ), depending on the temperature and time. A high temperature led to the formation of large voids at the IOL/IOZ interface. At 1200℃, the continuity of the Cr-rich oxide layer in the IOL was destroyed, and thus, spallation occurred. Extension of oxidation time contributed to the size of Al-rich oxide particles with the increase in the IOZ. Based on this finding,the oxidation kinetics of GH4738 was discussed, and the corresponding oxidation behavior at 900-1100℃ was predicted.
基金financially supported by the National Natural Science Foundation of China (No.51641102)the Natural Science Foundation of Jiangsu Province (No.16KJB430035)the Nantong Science and Technology Project (No. GY12015032)
文摘In this paper, the isothermal oxidation kinetics and oxidation behavior of GH586 superalloy from 800 to 1000℃ were investigated. The oxide scale morphologies of the surfaces and the cross sections after oxidation were characterized by means of X-ray diffraction （XRD） and scanning electron microscope （SEM） equipped with energy-dispersive spectroscopy （EDS）. The results show that the growth of the oxide scales on the surface of superalloy GH586 obeys a parabolic law with the activa- tion energy of 241.4 kJ.mo1-1 from 800 to 1000℃ The dense oxide scale formed at 800℃ is mainly composed of Cr203, NiCr204 and a small amount of TiO2. At 900℃, the oxide scale is divided into two layers： the outer layer with multiple cracks is mainly composed of ＂Cr203 and TiO2, while the inner is a layer of dense Cr203. Under the oxide scale, aluminum-rich oxides along the grain bound- aries are generated by the internal oxidation. At 1000 ℃for 100 h, cracks throughout the whole oxide film accel- erate the oxidation rate of Ni-based superalloy GH586 and large blocks of TiO2 in the oxide scale are generated, resulting in the spallation of oxide scale.
基金Item Sponsored by National High-tech Research and Development Program(863Program)of China(2012AA03A508)National Natural Science Foundation of China(51474031)
文摘In order to figure out the oxidation behavior of steels during heating,five micro-alloyed steels were subjected to continuous and isothermal oxidation using the thermo gravimetric analyzer and the Gleeble-3500thermo-mechanical simulator.The microstructure of oxide scales,especially the thickness fractions of Fe2O3,Fe3O4 and FeO layers,was analyzed using the scanning electron microscope（SEM）,electron probe microanalyzer（EPMA）and electron backscattered diffraction（EBSD）techniques.The micro-alloyed steels containing alloying elements（Si,Cr,Ni and Cu）show a higher oxidation resistance compared with the low carbon steel.It is found that alloying elements accumulated at scale/substrate interface during high temperature oxidation.Alloying elements function in two ways in the oxidation of steels：one is enhancing the scale/substrate interface and consequently suppressing the blister of scales;and the other is impeding the outward diffusion of iron cations from substrate to scales,resulting in the decrease of oxidation rate.As the diffusion of iron cations is impeded,the thickness fractions of Fe2O3 and Fe3O4of micro-alloyed steels are more than those of low carbon steels.
