The development of highly active functionalized ionic liquids(ILs)as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges.In this study,a highly efficient oxidative des...The development of highly active functionalized ionic liquids(ILs)as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges.In this study,a highly efficient oxidative desulfurization system was constructed,composed of dual-acidic ionic liquids(DILs)and H_(2)O_(2)-AcOH.The investigation results of four DILs prepared from different metal chlorides([HSO_(3)C_(3)NEt_(3)]Cl-MnCl_(n),MnCl_(n)=AlCl_(3),ZnCl_(2),CuCl_(2),FeCl_(3))in oxidative desulfurization showed that[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)had an outstanding catalytic effect and significantly promoted the oxidation of sulfides.With a 0.2 g[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3),the removal rate of dibenzothiophene(DBT)reached 100%in 10 mL model oil under mild conditions at 55℃for 20 min.The key is its ability to induce the dismutation of su-peroxide anions(·O_(2)^(-)),which facilitates the generation of singlet oxygen(1 O_(2)).The efficient oxidation of DBT is accomplished through a predominantly^(1)O_(2)-mediated_(n)on-radical mechanism.[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)serves as a favorable medium for contact to be made between^(1)O_(2)and sulfides,which indicates an efficient catalytic-adsorption synergy.展开更多
Development of clean desulfurization process that combines both efficient and environmentally friendly remains a significant challenge for diesel production.The photocatalytic oxidation desulfurization technology is r...Development of clean desulfurization process that combines both efficient and environmentally friendly remains a significant challenge for diesel production.The photocatalytic oxidation desulfurization technology is regarded as a promising process depending on the superior electron transfer and visible light utilization of photocatalyst.Herein,the nonstoichiometry MoO_(3-x)with outstanding photoresponse ability is prepared and modified by imidazole-based ionic liquid[C_(12)mim]Cl to upgrade electronic structure.The interface H-bonding between MoO_(3-x)and[C_(12)mim]Cl regard as electronic transfer channel and the recombination of e^(-)-h^(+)pairs is effectively inhibited with the modification of[C_(12)mim]Cl.Deep desulfurization rate of 96.6%can be reached within 60 min and the MoO_(3-x)/[C_(12)mim]Cl(MoC_(12))photocatalyst demonstrated outstanding cyclic stability within 7 cycles in an extraction coupled photocatalytic oxidation desulfurization(ECPODS)system.The study provides a new perspective on enhancing photocatalytic desulfurization through defect engineering and surface modification.展开更多
The design and synthesis of catalysts for the oxidation desulfurization and production of hydrogen are extremely important for solving environmental pollution and energy shortage.Herein,a novel bifunctional [α-Mo_(8)...The design and synthesis of catalysts for the oxidation desulfurization and production of hydrogen are extremely important for solving environmental pollution and energy shortage.Herein,a novel bifunctional [α-Mo_(8)O_(26)]^(4-)/[β-Mo_(8)O_(26)]^(4-)-based Cu-viologen complex H_(4)[Cu_(2)~ⅠCl_(2)(Hbcbpy)_(4)] [α-Mo_(8)O_(26)] [β-Mo8O_(26)]·H_(2)O(BHU-2,Hbcbpy=1-(4-carboxybenzyl)-4,4'-bipyridinium) was synthesized and characterized by single-crystal X-ray diffraction(XRD),infrared radiation spectra,powder X-ray diffraction(PXRD) and X-ray photoelectron spectroscopy(XPS) spectra.The structural characteristic of BHU-2 is the presence of two types of octamolybdate clusters [α-Mo_(8)O_(26)]^(4-)/[β-Mo_(8)O_(26)]^(4-)and a new binuclear Cu~Ⅰ-Hbcbpy complex linked by Cl-bridges[Cu_(2)ⅠCl_(2)(Hbcbpy)_(4)]^(4+).BHU-2 as a heterogeneous catalyst exhibits excellent activities to the oxidation desulfurization and photocatalytic hydrogen production.At room temperature,BHU-2 can catalyze 96% conversion of methyl phenyl sulfide with 98% selectivity,and the process obeys the pseudo-first-order reaction kinetic with the half-life of9.6 min.The notorious 2-chloroethyl ethyl sulfide can achieve 99% conversion with 98% selectivity within only1 min at the presence of BHU-2,and the turnover frequency(TOF) is up to 7400 h^(-1).BHU-2 also exhibits high catalytic activity for the oxidation of other aromatic and aliphatic thioethers within short time at room temperature.Furthermore,BHU-2 shows a high catalytic activity for visible-light-driven hydrogen evolution with an H_(2) evolution rate of 1677.85 μmol·g^(-1)·h^(-1) within 10 h.Moreover,the catalytic activities do not decrease evidently after three cycles,revealing the prominent structural stability and recyclability.展开更多
According to the mechanism of sulfur removal easily through oxidation, the process of smelting oxidation desulfurization of copper slags is studied, which supplies a new thinking for obtaining the molten iron of lower...According to the mechanism of sulfur removal easily through oxidation, the process of smelting oxidation desulfurization of copper slags is studied, which supplies a new thinking for obtaining the molten iron of lower sulfur content by smelting reduction of copper slags. Special attention is given to the effects of the holding temperature, the holding time and CaF2, CaO addition amounts on the desulfurization rate of copper slags. The results indicate that the rate of copper slags smelting oxidation desulfurization depends on the matte mass transfer rate through the slag phase. After the oxidation treatment, sulfur of copper slags can be removed as SO2 efficiently. Amount of Ca2＋ of copper slags affects the desulfurization rate greatly, and the slag desulfurization rate is reduced by adding a certain amount of CaF2 and CaO. Compared with CaF2, CaO is negative to slags sulfur removal with equal Ca2＋ addition. Under the air flow of 0.3 U/min, the sulfur content of copper slags can be reduced to 0. 004 67% in the condition of the holding time of 3 min and the holding temperature of 1 500 ℃. The sulfur content of molten iron is reduced to 0. 000 8 % in the smelting reduction of treated slags, and the problem of high sulfur content of molten iron obtained by smelting reduction with copper slag has been successively solved.展开更多
A few factors affecting plasma oxidation desulfurization of ethyl- thioether were investigated.Under the typical conditions,the conversion and degree of desulfurization of ethyl-thioether can be achieved up to 88% and...A few factors affecting plasma oxidation desulfurization of ethyl- thioether were investigated.Under the typical conditions,the conversion and degree of desulfurization of ethyl-thioether can be achieved up to 88% and 79% respectively.展开更多
A few factors affecting plasma oxidation desulfurization of isobutyl mercaptan were investigated. Under the reasonable condition, the conversion and degree of desulfurization of isobutyl mercaptan can be achieved up t...A few factors affecting plasma oxidation desulfurization of isobutyl mercaptan were investigated. Under the reasonable condition, the conversion and degree of desulfurization of isobutyl mercaptan can be achieved up to over 95% and 94％ respectively.展开更多
Catalytic oxidation desulfurization(CODS)technology has shown great promise for diesel desulfurization by virtue of its low cost,mild reaction conditions,and superior desulfurization performance.Herein,a series of FeM...Catalytic oxidation desulfurization(CODS)technology has shown great promise for diesel desulfurization by virtue of its low cost,mild reaction conditions,and superior desulfurization performance.Herein,a series of FeMoO_(x)/LaTiO_(y)-z samples with diverse Fe/Mo ratios were prepared via a facile citric acid-assisted method.The impact of Fe incorporation on the dispersion and surface elemental states of Mo species,as well as oxygen species content of the synthesized FeMoO_(x)/LaTiO_(y)-z catalysts were systematically characterized using TEM,BET,UV-vis DRS,XPS,XANES,and reaction kinetics,and their CODS performances were examined for 4,6-DMDBT removal.Experimental results demonstrated that Fe/Mo ratio significantly affected the Ti−O bond strength,surface dispersion and electronic structure of Mo O_(2)species on FeMoO_(x)/LaTiO_(y)-z catalysts.FeMoO_(x)/LaTiO_(y)-2 catalyst showed outstanding cycling durability and the best CODS performance with almost 100%removal of 4,6-DMDBT from model oil within 75 min due to its proper MoO3 dispersion,optimal redox property,and the most oxygen vacancy concentration.Nevertheless,further enhancing Fe content led to the increased dispersion of Mo species,while the decrease active Mo species as well as the increase of steric effect for 4,6-DMDBT accessing to the catalytic reactive sites considerably increase the apparent activation energy of FeMoO_(x)/LaTiO_(y)-z(z>2)catalysts during the CODS process,thereby seriously suppressing their CODS performances.Moreover,Radical trapping experiments reveal that the·,generated by the activation of O_(2)at the active sites,catalytic oxidized 4,6-DMDBT to the product of 4,6-DMDBTO_(2),thereby enabling both deep desulfurization and recovery of high-value 4,6-DMDBTO_(2).These findings offer an alternative strategy to achieve ultra deep desulfurization as well as separate and recover high economic value sulfone substances from diesel.展开更多
The development of an efficient dual-function catalytic-sorption system,which seamlessly integrates reaction and separation into a single step for extractant-free systems,represents a transformative advancement in oxi...The development of an efficient dual-function catalytic-sorption system,which seamlessly integrates reaction and separation into a single step for extractant-free systems,represents a transformative advancement in oxidative desulfurization(ODS)process.In this work,we introduce a novel dualfunction amphiphilic biochar(Mo/CBC)catalyst,functionalized with MoO_(3-x)featuring abundant oxygen vacancies,for highly effective extractant-free ODS.The polarity of the biochar was precisely tailored by varying the amount of KOH,leading to the creation of amphiphilic carriers.Subsequent ball milling facilitated the successful loading of MoO_(3-x)onto the biochar surface via an impregnation-calcination route leveraging carbon reduction,resulting in the synthesis of amphiphilic Mo/CBC catalysts.The amphiphilic nature of these catalysts ensures their stable dispersion within the oil phase,while also facilitating their interaction with the oxidant H2O2 and the adsorption of sulfur-containing oxidation products.Characterization techniques,including EPR,XPS,and in situ XRD,verified the existence of abundant oxygen vacancies obtained by carbon reduction on the amphiphilic Mo/CBC catalysts,which significantly boosted their activity in an extractant-free ODs system.Remarkably,the amphiphilic Mo/CBC catalyst displayed exceptional catalytic performance,achieving a desulfurization efficiency of 99.6%in just 10 min without extraction solvent.DFT theoretical calculations further revealed that H_(2)O_(2)readily dissociates into two OH radicals on the O_(vac)-MoO_(3),overcoming a low energy barrier.This process was identified as a key contributor to the catalyst's outstanding ODS performance.Furthermore,other biochar sources,such as rice straw,bamboo,rapeseed oil cake,and walnut oil cake,were investigated to produce Mo-based amphiphilic biochar catalysts,which all showed excellent desulfurization performance.This work establishes a versatile and highly efficient dual-function catalytic-sorption system by designing amphiphilic biochar catalysts enriched with oxygen vacancies,paving the way for the development of universally applicable ODS catalysts for industrial applications.展开更多
Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic fram...Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic framework(CoNi-MOF)is fabricated to disperse N-hydroxyphthalimide(NHPI),in which the whole catalyst provides plentiful synergic catalytic effect to improve the performance of oxidative desulfurization(ODS).As a bimetallic MOF,the second metal Ni doping results in the flower-like morphology and the modification of electronic properties,which ensure the exposure of NHPI and strengthen the synergistic effect of the overall catalyst.Compared with the monometallic Co-MOF and naked NHPI,the NHPI@CoNi-MOF triggers the efficient activation of molecular oxygen and improves the ODS performance without an initiator.The sulfur removal of dibenzothiophene-based model oil reaches 96.4%over the NHPI@CoNi-MOF catalyst in 8 h of reaction.Furthermore,the catalytic product of this aerobic ODS reaction is sulfone,which is adsorbed on the catalyst surface due to the difference in polarity.This work provides new insight and strategy for the design of a strong synergic catalytic effect between NHPI and bimetallic supports toward high-activity aerobic ODS materials.展开更多
A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80℃ to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were ch...A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80℃ to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were characterized byFourier transform infrared spectrophotometry (FT-IR), thermogravimetry/differential thermogravimetry (TG/DTG), andelectron spray ionization mass spectrometry (ESI-MS). The DESs were used as both extractants and catalysts to removedibenzothiophene from fuels via oxidative desulfurization (ODS). Experiments were performed to investigated the influenceof factors such as composition of DES, temperature, oxidant dosage (molar ratio of O:S), DES dosage (volume ratio ofDES:oil), and number of cycles on desulfurization rate. The results indicated that the removal rate of dibenzothiophene (DBT)was affected by the Lewis acidic DESs, with that of H_(3)PO_(4)/0.25∙ZnCl_(2) reaching 96.4% under optimal conditions (Voil=5 mL,VDES=1 mL, an oxidant dosage of 6, T=50 ℃). After six cycles, the desulfurization rate of H_(3)PO_(4)/0.25∙ZnCl_(2) remained above94.1%. The apparent activation energy of dibenzothiophene (DBT) removal reaction was determined by a pseudo-first orderkinetic equation according to the Arrhenius equation to be 32.34 kJ/mol, as estimated. A reaction mechanism is proposedbased on the experimental data and characterization results.展开更多
A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and m...A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and metal source respectively.These materials were then characterized through X-ray diffraction（XRD）,transmission electron microscopy（TEM）,Raman spectroscopy,Fourier transform infrared spectra（FTIR）,diffuse reflectance spectra（DRS）,and N2 adsorption-desorption,which were found to contain tungsten species that were effectively dispersed throughout the structure.The as-prepared materials W-SiO2 were also found to possess a mesoporous structure.The pore diameters of the respective sample W-SiO2-20 determined from the TEM images ranged from 2 to 4 nm,which was close to the average pore size determined from the nitrogen desorption isotherm（2.9 nm）.The materials were evaluated as catalysts for the heterogeneous oxidative desulfurization of dibenzothiophene（DBT）,which is able to achieve deep desulfurization within 40 min under the optimal conditions（Catalyst（W-SiO2-20）= 0.01 g,temperature = 60℃,oxidant（H2O2）= 20 μL）.For the removal of different organic sulfur compounds within oil,the ability of the catalyst（W-SiO2-20） under the same conditions to remove sulfur compounds decreased in the order：4,6-dimethyldibenzothiophene Dibenzothiophene Benzothiophene 1-dodecanethiol.Additionally,they did not require organic solvents as an extractant in the heterogeneous oxidative desulfurization process.After seven separate catalytic cycles,the desulfurization efficiency was still as high as 90.3%.From the gas chromatography-mass spectrometer analysis,DBT was entirely oxidized to its corresponding sulfone DBTO2 after reaction.A mechanism for the heterogeneous desulfurization reaction was proposed.展开更多
A highly active catalyst of phosphomolybdic acid ~HPMo） was prepared and applied in the catalytic oxidative desulfurization （CODS） system. The catalyst was characterized by FT-IR, XRD, XPS and superconducting NMR. ...A highly active catalyst of phosphomolybdic acid ~HPMo） was prepared and applied in the catalytic oxidative desulfurization （CODS） system. The catalyst was characterized by FT-IR, XRD, XPS and superconducting NMR. The influences of rn（catalyst）/m（oil）, V（H202）fV（oil）, reaction temperature and reaction time on the fractional conversion of benzothiophene （BT） and dibenzothiophene （DBT） were investigated. GC-MS and micra-coulometric methods were employed to investigate the reaction. The catalyst has high desulfurization activity in the removal of BT and DBT under mild conditions. The recycling experiments indicated that DBT and BT removal could still reach 95.2% and 95.7% after 10 cycles.展开更多
Heteropoly acid of Keggin structure phosphotungstic（HPW） and phosphomolybdic（HPMo） were chemically anchored to the modified SBA-15 channel. The materials were used as catalyst for oxidative desulfurization of orga...Heteropoly acid of Keggin structure phosphotungstic（HPW） and phosphomolybdic（HPMo） were chemically anchored to the modified SBA-15 channel. The materials were used as catalyst for oxidative desulfurization of organic sulfur compounds including benzothiophene （BT）, dibenzothiophene （DBT） and 4,6-dimethydibenzothiophene （4,6-DMDBT）. The experimental results show that the catalysts are efficient and reusable, the catalytic activity is hardly reduced even in the 5th cycle of use.展开更多
A simulated gasoline consisting of model sulfur compounds of thiophene （C4H4S） and 3-methythiophene （3-MC4H4S） dissolved in n-heptane was tested for the oxidative desulfurization in the hydrogen peroxide （H202） ...A simulated gasoline consisting of model sulfur compounds of thiophene （C4H4S） and 3-methythiophene （3-MC4H4S） dissolved in n-heptane was tested for the oxidative desulfurization in the hydrogen peroxide （H202） and formic acid oxidative system over metal oxide-loaded molecular sieve. The effects of the oxidative system, loaded metal oxides, phase transfer catalyst, the addition of olefin and aromatics on sulfur removal were investigated in details. The results showed that the sulfur removal rate of simulated gasoline in the H202/formic acid system was higher than in other oxidative systems. The cerium oxide-loaded molecular sieve was found very active catalyst for oxidation of simulated gasoline in this system. The sulfur removal rates of C4H4S and 3-MC4H4S were enhanced when phase transfer catalyst （PTC） was added. However, the sulfur removal rate of simulated gasoline was reduced with the addition of olefin and aromatics.展开更多
Platinum group metals(PGMs)usually exhibit promising aerobic catalytic abilities,providing a green and feasible oxidative desulfurization method.However,often,the PGM nanoparticles(NPs)get leached,and the catalysts ar...Platinum group metals(PGMs)usually exhibit promising aerobic catalytic abilities,providing a green and feasible oxidative desulfurization method.However,often,the PGM nanoparticles(NPs)get leached,and the catalysts are deactivated.In this work,Pt NPs with particle sizes of approximately 4–5 nm were encapsulated effectively and uniformly on the surface of vanadium pentoxide(V2O5)nanosheets(with thicknesses of approximately six atomic layers)through strong metal-support interactions.The synthesized catalysts promote catalytic aerobic oxidation reactions,realizing deep desulfurization(99.1%,<5μg g^(–1))under atmospheric pressure and 110℃reaction temperature.Remarkable degrees of sulfur removal could be achieved for oils with different initial S-concentrations and substrates.Additionally,the as-prepared catalysts could be recycled for reuse at least seven times.展开更多
The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of var...The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of various operating parameters including reaction temperature (T),acid to sulfur molar ratio (nacid/nS),and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated.The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal.Moreover,there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS=8 and 23 for the reaction temperatures of 25 and 60°C,respectively.The maximum observed sulfur removal in the present oxidative desulfurization system was 83.3%.展开更多
High-sulfur petroleum coke(HSPC),that is a by-product from slag oil in the coking process of refning,shows versatility values in practical applications and,however,concentrates the majority of organic sulfur.Herein,we...High-sulfur petroleum coke(HSPC),that is a by-product from slag oil in the coking process of refning,shows versatility values in practical applications and,however,concentrates the majority of organic sulfur.Herein,we design and construct a highly efective CTAB@HPA composites to be explored for the catalytic oxidative desulfurization of HSPC under mild conditions using hydrogen peroxide as the oxidant and 1-butyl-3-methylimidazole tetrafuoroborate ionic liquid as the extractant.The results demonstrate that the sulfur content of HSPC could be strikingly reduced from 4.46 wt%to 2.48 wt%under 60℃ and atmospheric pressure,and that the organic sulfur in HSPC is mainly oxidized to sulfoxide,sulfone and sulfate,which latter can be directly separated from petroleum coke.Moreover,the efect of reaction conditions on the desulfurization performance of HSPC as well as the catalytic oxidation reaction kinetic of HSPC desulfurization was systematically investigated.Furthermore,a mechanism for the oxidative desulfurization of HSPC over CTAB@HPA catalysts was proposed.Therefore,this work provides new insight into how to construct active catalysts for the desulfurization of HSPC under mild conditions.展开更多
12-Tungstophosphoric acid（PW） supported on KSF montmorillonite, PW/KSF, was used as catalyst for deep oxidative desulfurization（ODS） of mixed thiophenic compounds in model oil and crude oil under mild conditions u...12-Tungstophosphoric acid（PW） supported on KSF montmorillonite, PW/KSF, was used as catalyst for deep oxidative desulfurization（ODS） of mixed thiophenic compounds in model oil and crude oil under mild conditions using hydrogen peroxide（H2O2） as an oxidizing agent. A one-factor-at-a-time method was applied for optimizing the parameters such as temperature, reaction time, amount of catalyst, type of extractant and oxidant-tosulfur compounds（S-compounds） molar ratio. The corresponding products can be easily removed from the model oil by using ethanol as the best extractant. The results showed high catalytic activity of PW/KSF in the oxidative removal of dibenzothiophene（DBT） and mixed thiophenic model oil under atmospheric pressure at 75 ℃ in a biphasic system. To investigate the oxidation and adsorption effects of crude oil composition on ODS, the effects of cyclohexene, 1,7-octadiene and o-xylene with different concentrations were studied.展开更多
A unique redox-coupled biomimetic system was developed, in which Fe-Anderson type polyoxometalates(POMs) were employed as electron transfer mediators(ETMs) and benzenesulfonic acid(BSA)-based deep eutectic solvents(DE...A unique redox-coupled biomimetic system was developed, in which Fe-Anderson type polyoxometalates(POMs) were employed as electron transfer mediators(ETMs) and benzenesulfonic acid(BSA)-based deep eutectic solvents(DESs) were used as electron-donors for aerobic oxidative desulfurization(AODS) of diesel fuel. Different compositions of DESs were used and the polyethylene glycol 2000(PEG2000)/2.5 BSA system showed the highest desulfurization activity, with the removal of dibenzothiophene(DBT) at 60 ℃ reaching 95% in 60 min. The excellent desulfurization activity of the system is due to the in situ formation of peroxysulfonate via a biomimetic process. By constructing a coupled redox system, Fe-Anderson type POMs as ETMs reduce the activation energy of oxygen-activated sulfonate. The physical characteristics of four different DESs were tested. The results show that the conductivity of DESs is correlated with the composition of BSA-based DESs. However, there is no similar trend in viscosity testing at the same temperature, and the maximum viscosity value is obtained for the PEG2000/2.5 BSA system at 60 ℃, which may be associated with the stronger hydrogen bonds. It is worth noting that the PEG2000/2.5 BSA system also possesses the best desulfurization activity, which suggests that the activity of the desulfurization system is related to the strength of the hydrogen bond in DESs. Finally, the biomimetic desulfurization system exhibits excellent performance and good stability under mild reaction conditions(60 ℃, atmospheric pressure, oxygen as the oxidant).展开更多
Deep eutectic solvents(DESs) are a new class of green solvents analogous to ionic liquids due to their biodegradable capacity and low cost. However, the direct extractive desulfurization of diesel oil by DESs cannot m...Deep eutectic solvents(DESs) are a new class of green solvents analogous to ionic liquids due to their biodegradable capacity and low cost. However, the direct extractive desulfurization of diesel oil by DESs cannot meet the government’s standard. In this work, amphiphilic polyoxometalates were synthesized and characterized by FT-IR and mass spectrometry.The oxidative desulfurization results showed that benzothiophene(BT) could be completely removed by employing a [(CH)P(CH)]PMoO, DES(ChCl/2 Ac) and HOsystem. It was also found that the organic cation of catalysts played a positive role in oxidative desulfurization. The reaction conditions, such as reaction temperature and time, the amount of catalyst and DES and HO/S(O/S) molar ratio, were optimized. Different sulfides were tested to determine the desulfurization selectivity of the optimal reaction system, and it was found that 97.2% of dibenzothiophene(DBT) could be removed followed by 80.7% of 4-MDBT and 76.0% of 4,6-DMDBT. After reaction, the IR spectra showed that the catalyst [(CH)P(CH)]PMoOwas stable during the reaction process and the oxidative product was dibenzothiophene sulfone(DBTO). Furthermore, the catalyst can be regenerated and recycled for four runs with little loss of activity.展开更多
基金support provided by South Africa National Research Foundation(UID 95983,113648,137947)Foundation for Innovative Research Groups of the Natural Science Foundation of Hebei Province(no.B2021208005).
文摘The development of highly active functionalized ionic liquids(ILs)as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges.In this study,a highly efficient oxidative desulfurization system was constructed,composed of dual-acidic ionic liquids(DILs)and H_(2)O_(2)-AcOH.The investigation results of four DILs prepared from different metal chlorides([HSO_(3)C_(3)NEt_(3)]Cl-MnCl_(n),MnCl_(n)=AlCl_(3),ZnCl_(2),CuCl_(2),FeCl_(3))in oxidative desulfurization showed that[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)had an outstanding catalytic effect and significantly promoted the oxidation of sulfides.With a 0.2 g[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3),the removal rate of dibenzothiophene(DBT)reached 100%in 10 mL model oil under mild conditions at 55℃for 20 min.The key is its ability to induce the dismutation of su-peroxide anions(·O_(2)^(-)),which facilitates the generation of singlet oxygen(1 O_(2)).The efficient oxidation of DBT is accomplished through a predominantly^(1)O_(2)-mediated_(n)on-radical mechanism.[HSO_(3)C_(3)NEt_(3)]Cl-AlCl_(3)serves as a favorable medium for contact to be made between^(1)O_(2)and sulfides,which indicates an efficient catalytic-adsorption synergy.
基金supports from National Natural Science Foundation of China(Nos.22172066,22378176)supported by State Key Laboratory of Heavy Oil Processing.Supported by Jiangsu Collaborative Innovation Center of TechnologyMaterial of Water Treatment,Suzhou University of Science and Technology.
文摘Development of clean desulfurization process that combines both efficient and environmentally friendly remains a significant challenge for diesel production.The photocatalytic oxidation desulfurization technology is regarded as a promising process depending on the superior electron transfer and visible light utilization of photocatalyst.Herein,the nonstoichiometry MoO_(3-x)with outstanding photoresponse ability is prepared and modified by imidazole-based ionic liquid[C_(12)mim]Cl to upgrade electronic structure.The interface H-bonding between MoO_(3-x)and[C_(12)mim]Cl regard as electronic transfer channel and the recombination of e^(-)-h^(+)pairs is effectively inhibited with the modification of[C_(12)mim]Cl.Deep desulfurization rate of 96.6%can be reached within 60 min and the MoO_(3-x)/[C_(12)mim]Cl(MoC_(12))photocatalyst demonstrated outstanding cyclic stability within 7 cycles in an extraction coupled photocatalytic oxidation desulfurization(ECPODS)system.The study provides a new perspective on enhancing photocatalytic desulfurization through defect engineering and surface modification.
基金financially supported by the National Natural Science Foundation of China (Nos.22271021,21901018 and 21971024)the Natural Science Foundation of Liaoning Province (No.2022-MS-373)Liaoning Revitalization Talents Program (No.XLYC1902011)。
文摘The design and synthesis of catalysts for the oxidation desulfurization and production of hydrogen are extremely important for solving environmental pollution and energy shortage.Herein,a novel bifunctional [α-Mo_(8)O_(26)]^(4-)/[β-Mo_(8)O_(26)]^(4-)-based Cu-viologen complex H_(4)[Cu_(2)~ⅠCl_(2)(Hbcbpy)_(4)] [α-Mo_(8)O_(26)] [β-Mo8O_(26)]·H_(2)O(BHU-2,Hbcbpy=1-(4-carboxybenzyl)-4,4'-bipyridinium) was synthesized and characterized by single-crystal X-ray diffraction(XRD),infrared radiation spectra,powder X-ray diffraction(PXRD) and X-ray photoelectron spectroscopy(XPS) spectra.The structural characteristic of BHU-2 is the presence of two types of octamolybdate clusters [α-Mo_(8)O_(26)]^(4-)/[β-Mo_(8)O_(26)]^(4-)and a new binuclear Cu~Ⅰ-Hbcbpy complex linked by Cl-bridges[Cu_(2)ⅠCl_(2)(Hbcbpy)_(4)]^(4+).BHU-2 as a heterogeneous catalyst exhibits excellent activities to the oxidation desulfurization and photocatalytic hydrogen production.At room temperature,BHU-2 can catalyze 96% conversion of methyl phenyl sulfide with 98% selectivity,and the process obeys the pseudo-first-order reaction kinetic with the half-life of9.6 min.The notorious 2-chloroethyl ethyl sulfide can achieve 99% conversion with 98% selectivity within only1 min at the presence of BHU-2,and the turnover frequency(TOF) is up to 7400 h^(-1).BHU-2 also exhibits high catalytic activity for the oxidation of other aromatic and aliphatic thioethers within short time at room temperature.Furthermore,BHU-2 shows a high catalytic activity for visible-light-driven hydrogen evolution with an H_(2) evolution rate of 1677.85 μmol·g^(-1)·h^(-1) within 10 h.Moreover,the catalytic activities do not decrease evidently after three cycles,revealing the prominent structural stability and recyclability.
基金Sponsored by National Natural Science Foundation of China ( 50906035 , 51204082 )
文摘According to the mechanism of sulfur removal easily through oxidation, the process of smelting oxidation desulfurization of copper slags is studied, which supplies a new thinking for obtaining the molten iron of lower sulfur content by smelting reduction of copper slags. Special attention is given to the effects of the holding temperature, the holding time and CaF2, CaO addition amounts on the desulfurization rate of copper slags. The results indicate that the rate of copper slags smelting oxidation desulfurization depends on the matte mass transfer rate through the slag phase. After the oxidation treatment, sulfur of copper slags can be removed as SO2 efficiently. Amount of Ca2＋ of copper slags affects the desulfurization rate greatly, and the slag desulfurization rate is reduced by adding a certain amount of CaF2 and CaO. Compared with CaF2, CaO is negative to slags sulfur removal with equal Ca2＋ addition. Under the air flow of 0.3 U/min, the sulfur content of copper slags can be reduced to 0. 004 67% in the condition of the holding time of 3 min and the holding temperature of 1 500 ℃. The sulfur content of molten iron is reduced to 0. 000 8 % in the smelting reduction of treated slags, and the problem of high sulfur content of molten iron obtained by smelting reduction with copper slag has been successively solved.
基金The project was supported by National Natural Science Foundation of China
文摘A few factors affecting plasma oxidation desulfurization of ethyl- thioether were investigated.Under the typical conditions,the conversion and degree of desulfurization of ethyl-thioether can be achieved up to 88% and 79% respectively.
基金The project was supported by National Natural Science Foundation of China.
文摘A few factors affecting plasma oxidation desulfurization of isobutyl mercaptan were investigated. Under the reasonable condition, the conversion and degree of desulfurization of isobutyl mercaptan can be achieved up to over 95% and 94％ respectively.
基金supported by the Natural Science Foundation of Guangdong Province(2024A1515010908,2025A1515011103)Opening Project of Hubei Key Laboratory of Plasma Chemistry and Advanced Materials(2024P11)+2 种基金Postdoctoral Fellowship Program of CPSF(GZC20233104)National Natural Science Foundation of China(22202087)Opening Project of Hubei Key Laboratory of Biomass Fibers and Eco-Dyeing&Finishing(STRZ202418)。
文摘Catalytic oxidation desulfurization(CODS)technology has shown great promise for diesel desulfurization by virtue of its low cost,mild reaction conditions,and superior desulfurization performance.Herein,a series of FeMoO_(x)/LaTiO_(y)-z samples with diverse Fe/Mo ratios were prepared via a facile citric acid-assisted method.The impact of Fe incorporation on the dispersion and surface elemental states of Mo species,as well as oxygen species content of the synthesized FeMoO_(x)/LaTiO_(y)-z catalysts were systematically characterized using TEM,BET,UV-vis DRS,XPS,XANES,and reaction kinetics,and their CODS performances were examined for 4,6-DMDBT removal.Experimental results demonstrated that Fe/Mo ratio significantly affected the Ti−O bond strength,surface dispersion and electronic structure of Mo O_(2)species on FeMoO_(x)/LaTiO_(y)-z catalysts.FeMoO_(x)/LaTiO_(y)-2 catalyst showed outstanding cycling durability and the best CODS performance with almost 100%removal of 4,6-DMDBT from model oil within 75 min due to its proper MoO3 dispersion,optimal redox property,and the most oxygen vacancy concentration.Nevertheless,further enhancing Fe content led to the increased dispersion of Mo species,while the decrease active Mo species as well as the increase of steric effect for 4,6-DMDBT accessing to the catalytic reactive sites considerably increase the apparent activation energy of FeMoO_(x)/LaTiO_(y)-z(z>2)catalysts during the CODS process,thereby seriously suppressing their CODS performances.Moreover,Radical trapping experiments reveal that the·,generated by the activation of O_(2)at the active sites,catalytic oxidized 4,6-DMDBT to the product of 4,6-DMDBTO_(2),thereby enabling both deep desulfurization and recovery of high-value 4,6-DMDBTO_(2).These findings offer an alternative strategy to achieve ultra deep desulfurization as well as separate and recover high economic value sulfone substances from diesel.
基金supported by the National Natural Science Foundation of China(22162008)the Science and Technology Supporting Project of Guizhou Province([2022]208)+1 种基金the Guizhou Province Local Government Overseas Study Programthe open project of Guizhou Provincial Double Carbon and Renewable Energy Technology Innovation Research Institute.
文摘The development of an efficient dual-function catalytic-sorption system,which seamlessly integrates reaction and separation into a single step for extractant-free systems,represents a transformative advancement in oxidative desulfurization(ODS)process.In this work,we introduce a novel dualfunction amphiphilic biochar(Mo/CBC)catalyst,functionalized with MoO_(3-x)featuring abundant oxygen vacancies,for highly effective extractant-free ODS.The polarity of the biochar was precisely tailored by varying the amount of KOH,leading to the creation of amphiphilic carriers.Subsequent ball milling facilitated the successful loading of MoO_(3-x)onto the biochar surface via an impregnation-calcination route leveraging carbon reduction,resulting in the synthesis of amphiphilic Mo/CBC catalysts.The amphiphilic nature of these catalysts ensures their stable dispersion within the oil phase,while also facilitating their interaction with the oxidant H2O2 and the adsorption of sulfur-containing oxidation products.Characterization techniques,including EPR,XPS,and in situ XRD,verified the existence of abundant oxygen vacancies obtained by carbon reduction on the amphiphilic Mo/CBC catalysts,which significantly boosted their activity in an extractant-free ODs system.Remarkably,the amphiphilic Mo/CBC catalyst displayed exceptional catalytic performance,achieving a desulfurization efficiency of 99.6%in just 10 min without extraction solvent.DFT theoretical calculations further revealed that H_(2)O_(2)readily dissociates into two OH radicals on the O_(vac)-MoO_(3),overcoming a low energy barrier.This process was identified as a key contributor to the catalyst's outstanding ODS performance.Furthermore,other biochar sources,such as rice straw,bamboo,rapeseed oil cake,and walnut oil cake,were investigated to produce Mo-based amphiphilic biochar catalysts,which all showed excellent desulfurization performance.This work establishes a versatile and highly efficient dual-function catalytic-sorption system by designing amphiphilic biochar catalysts enriched with oxygen vacancies,paving the way for the development of universally applicable ODS catalysts for industrial applications.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.21978119,22202088)Key Research and Development Plan of Hainan Province(ZDYF2022SHFZ285)Jiangsu Funding Program for Excellent Postdoctoral Talent(2022ZB636)。
文摘Synergic catalytic effect between active sites and supports greatly determines the catalytic activity for the aerobic oxidative desulfurization of fuel oils.In this work,Ni-doped Co-based bimetallic metal-organic framework(CoNi-MOF)is fabricated to disperse N-hydroxyphthalimide(NHPI),in which the whole catalyst provides plentiful synergic catalytic effect to improve the performance of oxidative desulfurization(ODS).As a bimetallic MOF,the second metal Ni doping results in the flower-like morphology and the modification of electronic properties,which ensure the exposure of NHPI and strengthen the synergistic effect of the overall catalyst.Compared with the monometallic Co-MOF and naked NHPI,the NHPI@CoNi-MOF triggers the efficient activation of molecular oxygen and improves the ODS performance without an initiator.The sulfur removal of dibenzothiophene-based model oil reaches 96.4%over the NHPI@CoNi-MOF catalyst in 8 h of reaction.Furthermore,the catalytic product of this aerobic ODS reaction is sulfone,which is adsorbed on the catalyst surface due to the difference in polarity.This work provides new insight and strategy for the design of a strong synergic catalytic effect between NHPI and bimetallic supports toward high-activity aerobic ODS materials.
基金the College Student Innovation and Entrepreneurship Training Program Project of Liaoning Province(202310148016)Doctoral Fund of Liaoning Province(201501105).
文摘A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80℃ to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were characterized byFourier transform infrared spectrophotometry (FT-IR), thermogravimetry/differential thermogravimetry (TG/DTG), andelectron spray ionization mass spectrometry (ESI-MS). The DESs were used as both extractants and catalysts to removedibenzothiophene from fuels via oxidative desulfurization (ODS). Experiments were performed to investigated the influenceof factors such as composition of DES, temperature, oxidant dosage (molar ratio of O:S), DES dosage (volume ratio ofDES:oil), and number of cycles on desulfurization rate. The results indicated that the removal rate of dibenzothiophene (DBT)was affected by the Lewis acidic DESs, with that of H_(3)PO_(4)/0.25∙ZnCl_(2) reaching 96.4% under optimal conditions (Voil=5 mL,VDES=1 mL, an oxidant dosage of 6, T=50 ℃). After six cycles, the desulfurization rate of H_(3)PO_(4)/0.25∙ZnCl_(2) remained above94.1%. The apparent activation energy of dibenzothiophene (DBT) removal reaction was determined by a pseudo-first orderkinetic equation according to the Arrhenius equation to be 32.34 kJ/mol, as estimated. A reaction mechanism is proposedbased on the experimental data and characterization results.
基金supported by the National Nature Science Foundation of China(21276117,21376111,21406092)~~
文摘A series of functional,tungsten-containing mesoporous silica materials（W-SiO2） have been fabricated directly from an ionic liquid that contained imidazole and polyoxometalate,which acted as mesoporous template and metal source respectively.These materials were then characterized through X-ray diffraction（XRD）,transmission electron microscopy（TEM）,Raman spectroscopy,Fourier transform infrared spectra（FTIR）,diffuse reflectance spectra（DRS）,and N2 adsorption-desorption,which were found to contain tungsten species that were effectively dispersed throughout the structure.The as-prepared materials W-SiO2 were also found to possess a mesoporous structure.The pore diameters of the respective sample W-SiO2-20 determined from the TEM images ranged from 2 to 4 nm,which was close to the average pore size determined from the nitrogen desorption isotherm（2.9 nm）.The materials were evaluated as catalysts for the heterogeneous oxidative desulfurization of dibenzothiophene（DBT）,which is able to achieve deep desulfurization within 40 min under the optimal conditions（Catalyst（W-SiO2-20）= 0.01 g,temperature = 60℃,oxidant（H2O2）= 20 μL）.For the removal of different organic sulfur compounds within oil,the ability of the catalyst（W-SiO2-20） under the same conditions to remove sulfur compounds decreased in the order：4,6-dimethyldibenzothiophene Dibenzothiophene Benzothiophene 1-dodecanethiol.Additionally,they did not require organic solvents as an extractant in the heterogeneous oxidative desulfurization process.After seven separate catalytic cycles,the desulfurization efficiency was still as high as 90.3%.From the gas chromatography-mass spectrometer analysis,DBT was entirely oxidized to its corresponding sulfone DBTO2 after reaction.A mechanism for the heterogeneous desulfurization reaction was proposed.
基金supported by the National Natural Science Foundation of China (21473126)~~
文摘A highly active catalyst of phosphomolybdic acid ~HPMo） was prepared and applied in the catalytic oxidative desulfurization （CODS） system. The catalyst was characterized by FT-IR, XRD, XPS and superconducting NMR. The influences of rn（catalyst）/m（oil）, V（H202）fV（oil）, reaction temperature and reaction time on the fractional conversion of benzothiophene （BT） and dibenzothiophene （DBT） were investigated. GC-MS and micra-coulometric methods were employed to investigate the reaction. The catalyst has high desulfurization activity in the removal of BT and DBT under mild conditions. The recycling experiments indicated that DBT and BT removal could still reach 95.2% and 95.7% after 10 cycles.
基金the National Natural Science Foundation of China (No.50272048)
文摘Heteropoly acid of Keggin structure phosphotungstic（HPW） and phosphomolybdic（HPMo） were chemically anchored to the modified SBA-15 channel. The materials were used as catalyst for oxidative desulfurization of organic sulfur compounds including benzothiophene （BT）, dibenzothiophene （DBT） and 4,6-dimethydibenzothiophene （4,6-DMDBT）. The experimental results show that the catalysts are efficient and reusable, the catalytic activity is hardly reduced even in the 5th cycle of use.
基金Supported by the National Natural Science Foundation of China （No.20276015） and the Natural Science Foundation of Hebei Province （No.203364）.
文摘A simulated gasoline consisting of model sulfur compounds of thiophene （C4H4S） and 3-methythiophene （3-MC4H4S） dissolved in n-heptane was tested for the oxidative desulfurization in the hydrogen peroxide （H202） and formic acid oxidative system over metal oxide-loaded molecular sieve. The effects of the oxidative system, loaded metal oxides, phase transfer catalyst, the addition of olefin and aromatics on sulfur removal were investigated in details. The results showed that the sulfur removal rate of simulated gasoline in the H202/formic acid system was higher than in other oxidative systems. The cerium oxide-loaded molecular sieve was found very active catalyst for oxidation of simulated gasoline in this system. The sulfur removal rates of C4H4S and 3-MC4H4S were enhanced when phase transfer catalyst （PTC） was added. However, the sulfur removal rate of simulated gasoline was reduced with the addition of olefin and aromatics.
文摘Platinum group metals(PGMs)usually exhibit promising aerobic catalytic abilities,providing a green and feasible oxidative desulfurization method.However,often,the PGM nanoparticles(NPs)get leached,and the catalysts are deactivated.In this work,Pt NPs with particle sizes of approximately 4–5 nm were encapsulated effectively and uniformly on the surface of vanadium pentoxide(V2O5)nanosheets(with thicknesses of approximately six atomic layers)through strong metal-support interactions.The synthesized catalysts promote catalytic aerobic oxidation reactions,realizing deep desulfurization(99.1%,<5μg g^(–1))under atmospheric pressure and 110℃reaction temperature.Remarkable degrees of sulfur removal could be achieved for oils with different initial S-concentrations and substrates.Additionally,the as-prepared catalysts could be recycled for reuse at least seven times.
基金Supported by the R&D center of Esfahan refinery (Esfahan,Iran)the technical supports of central laboratory of Esfahan Refinery for total sulfur analysis
文摘The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of various operating parameters including reaction temperature (T),acid to sulfur molar ratio (nacid/nS),and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated.The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal.Moreover,there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS=8 and 23 for the reaction temperatures of 25 and 60°C,respectively.The maximum observed sulfur removal in the present oxidative desulfurization system was 83.3%.
基金This work was financially supported by the National Natural Science Foundation of China(No.21722604)the Postdoctoral Foundation of China(Nos.2019M651743 and 2020M671365)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20190852)the National Youth Natural Science Foundation(No.8111310009).
文摘High-sulfur petroleum coke(HSPC),that is a by-product from slag oil in the coking process of refning,shows versatility values in practical applications and,however,concentrates the majority of organic sulfur.Herein,we design and construct a highly efective CTAB@HPA composites to be explored for the catalytic oxidative desulfurization of HSPC under mild conditions using hydrogen peroxide as the oxidant and 1-butyl-3-methylimidazole tetrafuoroborate ionic liquid as the extractant.The results demonstrate that the sulfur content of HSPC could be strikingly reduced from 4.46 wt%to 2.48 wt%under 60℃ and atmospheric pressure,and that the organic sulfur in HSPC is mainly oxidized to sulfoxide,sulfone and sulfate,which latter can be directly separated from petroleum coke.Moreover,the efect of reaction conditions on the desulfurization performance of HSPC as well as the catalytic oxidation reaction kinetic of HSPC desulfurization was systematically investigated.Furthermore,a mechanism for the oxidative desulfurization of HSPC over CTAB@HPA catalysts was proposed.Therefore,this work provides new insight into how to construct active catalysts for the desulfurization of HSPC under mild conditions.
基金Razi University Research Council for support of this work
文摘12-Tungstophosphoric acid（PW） supported on KSF montmorillonite, PW/KSF, was used as catalyst for deep oxidative desulfurization（ODS） of mixed thiophenic compounds in model oil and crude oil under mild conditions using hydrogen peroxide（H2O2） as an oxidizing agent. A one-factor-at-a-time method was applied for optimizing the parameters such as temperature, reaction time, amount of catalyst, type of extractant and oxidant-tosulfur compounds（S-compounds） molar ratio. The corresponding products can be easily removed from the model oil by using ethanol as the best extractant. The results showed high catalytic activity of PW/KSF in the oxidative removal of dibenzothiophene（DBT） and mixed thiophenic model oil under atmospheric pressure at 75 ℃ in a biphasic system. To investigate the oxidation and adsorption effects of crude oil composition on ODS, the effects of cyclohexene, 1,7-octadiene and o-xylene with different concentrations were studied.
文摘A unique redox-coupled biomimetic system was developed, in which Fe-Anderson type polyoxometalates(POMs) were employed as electron transfer mediators(ETMs) and benzenesulfonic acid(BSA)-based deep eutectic solvents(DESs) were used as electron-donors for aerobic oxidative desulfurization(AODS) of diesel fuel. Different compositions of DESs were used and the polyethylene glycol 2000(PEG2000)/2.5 BSA system showed the highest desulfurization activity, with the removal of dibenzothiophene(DBT) at 60 ℃ reaching 95% in 60 min. The excellent desulfurization activity of the system is due to the in situ formation of peroxysulfonate via a biomimetic process. By constructing a coupled redox system, Fe-Anderson type POMs as ETMs reduce the activation energy of oxygen-activated sulfonate. The physical characteristics of four different DESs were tested. The results show that the conductivity of DESs is correlated with the composition of BSA-based DESs. However, there is no similar trend in viscosity testing at the same temperature, and the maximum viscosity value is obtained for the PEG2000/2.5 BSA system at 60 ℃, which may be associated with the stronger hydrogen bonds. It is worth noting that the PEG2000/2.5 BSA system also possesses the best desulfurization activity, which suggests that the activity of the desulfurization system is related to the strength of the hydrogen bond in DESs. Finally, the biomimetic desulfurization system exhibits excellent performance and good stability under mild reaction conditions(60 ℃, atmospheric pressure, oxygen as the oxidant).
基金financially supported by the National Natural Science Foundation of China (Nos. 21506080 and 21766007)Natural Science Foundation of Jiangsu Province (No. BK20150485)+1 种基金Advanced Talents of Jiangsu University (No. 15JDG053)A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Deep eutectic solvents(DESs) are a new class of green solvents analogous to ionic liquids due to their biodegradable capacity and low cost. However, the direct extractive desulfurization of diesel oil by DESs cannot meet the government’s standard. In this work, amphiphilic polyoxometalates were synthesized and characterized by FT-IR and mass spectrometry.The oxidative desulfurization results showed that benzothiophene(BT) could be completely removed by employing a [(CH)P(CH)]PMoO, DES(ChCl/2 Ac) and HOsystem. It was also found that the organic cation of catalysts played a positive role in oxidative desulfurization. The reaction conditions, such as reaction temperature and time, the amount of catalyst and DES and HO/S(O/S) molar ratio, were optimized. Different sulfides were tested to determine the desulfurization selectivity of the optimal reaction system, and it was found that 97.2% of dibenzothiophene(DBT) could be removed followed by 80.7% of 4-MDBT and 76.0% of 4,6-DMDBT. After reaction, the IR spectra showed that the catalyst [(CH)P(CH)]PMoOwas stable during the reaction process and the oxidative product was dibenzothiophene sulfone(DBTO). Furthermore, the catalyst can be regenerated and recycled for four runs with little loss of activity.
