To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatin...Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatings on C/CA to address its susceptibility to oxidation is a feasible approach to promote its application in oxidative environments.However,the currently reported coatings on C/CA mainly focus on improving the ablation performance and coating preparation process typically necessitating high-temperature heat treatment.This procedure can increase its thermal conductivity and reduce its thermal insulation ability.In this study,a series of ceramic-resin coatings were fabricated on C/CA through a simple slurry brushing-drying approach at room temperature.The effects of phenolic resin content on the coating structure,residual stress,thermal shock,and oxidation behaviors were investigated.Due to the adhesive properties and curing-induced shrinkage,the PR-7.5 coating(containing 7.5%(in mass)phenolic resin in the slurry)exhibits bonding strength close to fracture strength of the substrate and residual compressive stress of 0.853 GPa,which is beneficial for resisting thermal shock cracking.However,excessive resin content(PR-10.0 containing 10.0%(in mass)phenolic resin in the slurry)induces tensile stress due to uneven curing shrinkage,thereby leading to thermal shock cracking.Meanwhile,oxidation tests reveal significantly reduced weight losses for PR-7.5(17.46%at 800℃/100 min,8.15%at 1000℃/120 min,3.15%at 1200℃/120 min)versus uncoated C/CA’s 44.60%loss at 800℃/20 min.This work provides a brand-new and simple approach to improving the anti-oxidation performance of C/CA and expands its application in mild oxidative environments.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the in...Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the intrinsic activity of Ni and Co catalytic centers.However,the dynamic evolution and atomic-scale synergy between these centers remain elusive.Herein,we fabricated NiCo_(2)O_(4)nanosheets supported on nickel foam,where Ni preferentially occupies tetrahedral sites to regulate the electronic configuration of octahedral Co.Experimental and theoretical results demonstrate that the incorporation of tetrahedral Ni induces low-to-intermediate spin transition in octahedral Co,thereby optimizing eg orbital occupancy and stabilizing active sites.This spin-state engineering establishes Ni-Co synergistic catalytic centers for the selective oxidation of glucose to formate(FA).At higher potential(≥1.4 V vs.RHE),octahedral Co undergoes reconstruction into excessive active CoOOH and CoO_(2)species,resulting in glucose overoxidation to CO_(2)and intensified competitive oxygen evolution.In contrast,at lower potentials(<1.4 V vs.RHE),tetrahedral Ni facilitates electron delocalization across the Ni–O–Co lattice,thereby stabilizing octahedral Co for glucose adsorption and oxidation.Subsequently,a coupled electrocatalytic system was constructed,achieving 80.7%FA yield with 91.3%Faradaic efficiency(FE)at NiCo_(2)O_(4)anode and H2 evolution rate of 696μmol h^(−1)with 99.9%FE at Pt cathode for 2 h under 1.35 V vs.RHE.This work provides a deep insight into spin-state regulation of the catalytic center,offering valuable guidance for rational catalyst design.展开更多
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction(HOR)catalysts for proton exchange membrane fuel cells(PEMFCs).However,designing multifunctional ...Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction(HOR)catalysts for proton exchange membrane fuel cells(PEMFCs).However,designing multifunctional synergistic schemes for single-atom sites remains a significant challenge.Herein,we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel(IrNi)atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon(IrNi_(Dimer/NC1.8)-PNC).The paired IrNi dimer features an asymmetric Ir-N_(3)configuration coordinated with heteroatomic Ni-N_(3)O via an N-bridge.Remarkably,IrNi_(Dimer/NC1.8)-PNC exhibits a~23-fold enhancement in mass activity(4.36 A mg-1Ir at 20 mV)and 5-fold longer stability compared to benchmarking Pt/C toward HOR,while achieving a high rated power density of 1.18 W cm^(-2)in PEMFC anode applications.Furthermore,IrNi_(Dimer/NC1.8)-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices.Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions,thereby enhancing HOR activity.Importantly,the asymmetric IrNi dimer enables efficient CO^(*)and OH^(*)co-adsorption while facilitating CO_(2)^(*)desorption,synergistically mitigating CO poisoning and improving atom utilization efficiency.This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.展开更多
Triterpenoids are valuable medicinal scaffolds,characterized by excellent pharmacological properties and the presence of hydroxyl and carboxyl groups that allow for further structural modifications.Expanding the scope...Triterpenoids are valuable medicinal scaffolds,characterized by excellent pharmacological properties and the presence of hydroxyl and carboxyl groups that allow for further structural modifications.Expanding the scope of oxidative modifications on these molecules is crucial for increasing their synthetic structural diversity and unlocking new potential pharmacological activities.However,the progress has been limited by the scarcity of suitable tailoring enzymes.Here,we reported a break-through in achieving targeted and remote dual-site oxidation of licorice triterpenoids using a single P450 mutant.This approach successfully enabled the selective synthesis of the rare triterpenoid,liquiritic acid and 24-OH-liquiritic acid.Our findings demonstrate that microenvironmental accessibility engineering of triterpenoid substrates within the P450 enzyme is essential for continuous and regioselective oxidation.This study not only sheds light on the mechanistic aspects of P450 catalysis but also expands the enzymatic toolkit for selective oxidative modifications in triterpenoid biosynthesis.展开更多
Single-atom catalysts(SACs)have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency,distinctive geometric,and electronic configurations.However,the effica...Single-atom catalysts(SACs)have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency,distinctive geometric,and electronic configurations.However,the efficacy of SACs remains limited for certain reactions requiring simultaneous activation of multiple reactants over metallic active sites.Herein,we report an atomically dispersed Pt1Ru1 dual-atom pair site anchored on nanodiamond@graphene(ND@G)for CO oxidation.The Pt1Ru1 dual-atom catalyst shows an exceptional turnover frequency(TOF)of 17.6.10^(-2)s^(-1)at significantly lower temperature(30℃),achieving a tenfold increase in TOF compared to singleatom Pt1/ND@G catalyst(1.5.10^(-2)s^(-1))and surpassing to previously reported Pt-based catalysts under similar conditions.Moreover,the catalyst demonstrates excellent stability,maintaining its activity for 40 h at 80℃without significant deactivation.The superior catalytic performance of Pt-Ru dual-atom catalysts is attributed to the synergistic effect between Pt and Ru atoms with enhanced metallicity for improving simultaneous adsorption and activation of CO and O_(2),and the tuning of conventional competitive reactant adsorption into a non-competitive pathway over dual-atom pair sites.The present work manifests the advantages of dual-atom pair sites in heterogeneous catalysis and paves the way for precise design of catalysts at the atomic scale.展开更多
The development of efficient photocatalysts for crucial organic transformation,such as aerobic oxidation,remains challenging.Although powdered porous materials offer abundant accessible active sites,their application ...The development of efficient photocatalysts for crucial organic transformation,such as aerobic oxidation,remains challenging.Although powdered porous materials offer abundant accessible active sites,their application in liquid-phase catalysis is often limited by insufficient light absorption and inevitable charge recombination,which are inherent drawbacks of conventional heterogeneous catalysts.Here,through rational design and nanoscale-engineering of porous aromatic frameworks(PAFs)comprising porphyrin and porous organic cage,a quasi-homogeneous porous photocatalyst with high catalytic activity and controllable dimension was developed.The interface-directed growth in oil-in-water emulsion shaped the morphology of photoactive PAFs from powders to nanoflakes,which facilitated the light absorbance and catalyst-substrate interaction.Compared with PAF powders,PAF nanoflakes exhibited superior photocatalytic activity for aerobic oxidation.For mustard gas simulant(2-chloroethyl ethyl sulfide,CEES),PAF nanoflakes exhibited ultrafast detoxification rates in room air with a half-life(t_(1/2))as fast as 26s,which even exceeded other catalysts in pure oxygen.It also completely catalyzed the aerobic oxidation of thioether within 15 min,which is almost the fastest rate among any reported organic photocatalysts.Furthermore,the efficient catalytic performance under mild conditions caused by improved light enrichment,surface charge transfer and carrier lifetime was elucidated.展开更多
Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert...Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert grinding media often fail to discriminate ef-fectively between pyrite and valuable copper minerals due to strong copper activation on pyrite surfaces.This study introduced a novel approach using inorganic radicals generated from peroxymonosulfate(PMS)to selectively oxidize and depress pyrite.Flotation tests with synthetic high-pyrite ore blends showed that PMS significantly reduced pyrite recovery while maintaining or improving chalcopyrite flot-ation.Ethylenediaminetetraacetic acid(EDTA)extraction confirmed selective oxidation of pyrite,and electron paramagnetic resonance(EPR)spectroscopy identified hydroxyl(·OH)and sulfate(SO_(4)^(·-))radicals as the dominant reactive species.Iron ions from grinding me-dia and mineral surfaces were identified as key activators of PMS.A major insight was pyrite’s dual role,acting both as a radical scav-enger and an activator,which made it highly reactive and susceptible to radical-induced oxidation.This process converted surface copper-sulfur species into copper hydroxides,effectively suppressing pyrite flotation.While previous studies have applied EPR to detect radicals in simplified activator/precursor systems,this study provides the first direct mechanistic evidence of radical-driven selectivity in flotation by detecting inorganic radicals in a complex flotation slurry,thereby demonstrating their persistence under industrially relevant conditions and establishing a foundation for more effective and targeted flotation strategies.展开更多
In this work,we constructed a three-dimensional electrochemical system(3D-ECO),which included the cathode and anode electrode plates,as well as the screening of three-dimensional particle electrodes and parameter opti...In this work,we constructed a three-dimensional electrochemical system(3D-ECO),which included the cathode and anode electrode plates,as well as the screening of three-dimensional particle electrodes and parameter opti-mization,for the degradation of landfill leachate(LL)containing elevated levels of tetracycline(TC),and explored its mechanism of action.Firstly,titanium-based ruthenium-iridium(Ti/RuO_(2)-IrO_(2)),titanium-based ruthenium-iridium-platinum(Ti/Pt-RuO_(2)-IrO_(2)),and titanium-based tin-antimony(Ti/SnO_(2)-Sb_(2)O_(3))were employed as an-odes in the electrocatalytic oxidation system,with titanium and stainless steel plates serving as cathodes,to construct the optimal two-dimensional electrocatalytic oxidation system(2D-ECO)through cross-comparison ex-periments.Subsequently,using granular activated carbon(GAC),coconut shell biochar(CBC),walnut shell carbon(WBC),and bamboo charcoal(BBC)as particle electrodes,a 3D-ECO system was developed.The influence of var-ious operational parameters on treating TC-containing LL was investigated.The optimal operating parameters obtained from the study was:pH=5,current density of 30 mA/cm^(2),particle dosage of 7 g/L,particle size ranging from 1.70 to 2.00 mm,and electrode spacing of 4 cm.Under these conditions,the COD removal rate of 3D-ECO within three hours was 90.25%,the TC removal rate was 72.41%,and the NH_(3)-N removal rate was 39.52%.The removal of TC followed a pseudo-first-order kinetic model.Additionally,degradation mechanisms were elucidated through electron paramagnetic resonance(EPR)spectrometer and Tert-Butanol(TBA)quenching experiments,indicating that the degradation primarily occurred through a non-radical(1O_(2))pathway.This re-search offers a comprehensive analysis of the simultaneous breakdown of intricate LL matrices and TC,enhancing our comprehension of the degradation processes and underlying mechanisms.展开更多
Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxi...Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.展开更多
The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as ano...The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as anode materials for fuel cells.However,the exploration of trimetallic nanoflowers with porous architectures remains limited.In this study,we present a straightforward one-step solvothermal method for the synthesis of trimetallic Pd Cu Ni porous nanoflowers(PNFs).Leveraging several unique advantages,such as an open superstructure,high porosity,and enhanced electronic interactions among the trimetals,the resulting Pd Cu Ni PNFs demonstrate significantly improved electrochemical performance,with mass activities reaching 5.94 and 10.14 A/mg for the ethanol oxidation reaction(EOR)and the ethylene glycol oxidation reaction(EGOR),respectively.Furthermore,the Pd Cu Ni PNFs exhibit optimized d-band centers and the most negative onset oxidation potential,indicating enhanced antitoxicity and stability.This study not only provides a novel perspective on the synthesis of 3D porous nanomaterials but also highlights the potential application value of trimetallic nanoalloys in catalysis.展开更多
An advanced AlCrSiN/AlCrN/CrN/Cr multilayer coating was developed via hybrid multiarc ion plating and high-power impulse magnetron sputtering.The multilayer design enhanced the substrate-coating compatibility,achievin...An advanced AlCrSiN/AlCrN/CrN/Cr multilayer coating was developed via hybrid multiarc ion plating and high-power impulse magnetron sputtering.The multilayer design enhanced the substrate-coating compatibility,achieving a critical load of 87.8 N.Silicon doping induced nanocrystallization and amorphization,increasing the hardness to 26 GPa.At high temperatures,a nanoscale Cr-rich(Cr,Al)_(2)O_(3) layer was formed,effectively inhibiting oxygen diffusion.The coating underwent unique phase transformations,during which Cr_(2)N and amorphous Si3N4 were converted into dispersed SiCr_(3) nanoparticles,which stabilized Cr atoms and suppressed their outward diffusion.Ab initio molecular dynamics simulations revealed that Cr atoms exhibited higher chemical activity and oxygen-capture capability than Al atoms and Si atoms served as diffusion barriers by pinning onto the oxidized surface,considerably improving the oxidation resistance of the coating.展开更多
The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts rem...The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts remains a primary challenge.In this study,an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t_(2g)orbitals into Ni_(3)Se_(4).Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects,effectively modulating the local coordination environment of the metal centers.The presence of Mn also elongates Ni–Se(O)bonds,which reduces eg orbital occupancy and modifies the spin state of the material.Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity,achieving a MOR current density up to∼190 mA cm^(−2)at 1.6 V.This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
The effective separation and utilization of photo-generated carriers are of great significance for promoting the development of photocatalysis,especially in the coupled process of photocatalytic H_(2)production and va...The effective separation and utilization of photo-generated carriers are of great significance for promoting the development of photocatalysis,especially in the coupled process of photocatalytic H_(2)production and valueadded chemicals synthesis.To realize this goal,a sandwichstructured MnO_(2)@ZnIn_(2)S_(4)@Ti_(3)C_(2)hollow sphere was designed and synthesized,in which MnO_(2)and Ti_(3)C_(2)were loaded on the inner and outer surfaces of ZnIn_(2)S_(4),respectively.In the photocatalytic system,MnO_(2)as oxidation cocatalyst and Ti_(3)C_(2)as reduction cocatalyst can serve as photo-generated holes and electrons collectors,respectively,which boost the photo-generated carrier separation and create a spatially separated redox reaction.Furthermore,the unique hollow structure integrated into the photocatalytic system further endows a significant enhancement in light-harvesting ability.Remarkably,the optimal MnO_(2)@ZnIn_(2)S_(4)@Ti_(3)C_(2)hollow sphere exhibits an outstanding the photocatalytic activity for coupled H_(2)production(6.29 mmol g^(-1)h^(-1))and selective benzyl alcohol oxidation to benzaldehyde(5.26 mmol g^(-1)h^(-1)),which is significantly superior to that of ZnIn_(2)S_(4),MnO_(2)@ZnIn_(2)S_(4),and ZnIn_(2)S_(4)@Ti_(3)C_(2).By the in situ irradiated X-ray photoelectron spectroscopy,the result reveals that the spatially separated redox dual-cocatalysts can effectively impel the photo-generated carrier separation.Simultaneously,the intermediates during the benzyl alcohol oxidation process have also been confirmed through in situ electron paramagnetic resonance spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy.This work provides a reference and inspiration for constructing efficient photocatalysts that achieve an efficient coupling of photocatalytic H_(2)production and value-added chemicals synthesis.展开更多
Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electro...Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electrocatalytic oxidations of saturated alcohols(C_(1)-C_(6))to selectively form formate using Ni Co hydroxide(Ni Co-OH)derived Ni Co_(2)O_(4)solid-acid electrocatalysts with balanced Lewis acid(LASs)and Brønsted acid sites(BASs).Thermal treatment transforms BASs-rich(89.6%)Ni Co-OH into Ni Co_(2)O_(4)with nearly equal distribution of LASs(53.1%)and BASs(46.9%)which synergistically promote adsorption and activation of OH-and alcohol molecules for enhanced oxidation activity.In contrast,BASs-enriched Ni Co-OH facilitates formation of higher valence metal sites,beneficial for water oxidation.The combined experimental studies and theoretical calculation imply the oxidation ability of C1-C6alcohols increases as increased number of hydroxyl groups and decreased HOMO-LUMO gaps:methanol(C_(1))<ethylene glycol(C_(2))<glycerol(C3)<meso-erythritol(C4)<xylitol(C5)<sorbitol(C6),while the formate selectivity shows the opposite trend from 100 to 80%.This study unveils synergistic roles of LASs and BASs,as well as hydroxyl group effect in electro-upgrading of alcohols using solid-acid electrocatalysts.展开更多
Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-infla...Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-inflammatory,microbiota regulating,and memory-improving potentials in previous in vitro and AlCl3-induced zebrafish studies.However,its effects of memory-improving and gutbrain axis regulating on Aβ-induced mammalian AD models have not been explored.In this study,intragastric administrated BTL-Ⅰ ameliorated cognitive deficits related to recognition and spatial memory impaired by Aβ_(1-42)intracerebroventricular injection in mice.BTL-Ⅰ maintained gut microbiota balance by increasing the abundance of Blautia,Muribaculaceae,Bacteroides,Akkermansia,etc.,and decreasing CAG-352,Clostridia UCG-014,different Lachnospiraceae groups,etc.,and Firmicutes/Bacteroidota ratio and elevated the levels of short-chain fatty acids.Additionally,it alleviated intestinal oxidative stress,inflammatory responses,and pathological damage.Furthermore,BTL-I reversed Aβ_(1-42)-induced activation of microglia and astrocytes in the hippocampus and inhibited the elevated oxidative stress and proinflammatory cytokines in both plasma and brain.The correlation analysis between the regulated taxa and biomarkers supports the role of gut microbiota in adjusting inflammation,oxidative stress,and memory.In conclusion,BTL-I may serve as a valuable drug lead for treating Alzheimer’s disease by systematically inhibiting microbiota imbalance,inflammation,and oxidative stress along the gut-brain axis.展开更多
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金National Natural Science Foundation of China(52272075,52472053)Research Fund of Youth Innovation Promotion Association of CAS,China(2021190)Defense Industrial Technology Development Program(JCKY2021130B007)。
文摘Carbon fiber-reinforced carbon aerogel(C/CA)composites are one of the most promising candidates for applications requiring both thermal insulation and load bearing capabilities.The preparation of anti-oxidation coatings on C/CA to address its susceptibility to oxidation is a feasible approach to promote its application in oxidative environments.However,the currently reported coatings on C/CA mainly focus on improving the ablation performance and coating preparation process typically necessitating high-temperature heat treatment.This procedure can increase its thermal conductivity and reduce its thermal insulation ability.In this study,a series of ceramic-resin coatings were fabricated on C/CA through a simple slurry brushing-drying approach at room temperature.The effects of phenolic resin content on the coating structure,residual stress,thermal shock,and oxidation behaviors were investigated.Due to the adhesive properties and curing-induced shrinkage,the PR-7.5 coating(containing 7.5%(in mass)phenolic resin in the slurry)exhibits bonding strength close to fracture strength of the substrate and residual compressive stress of 0.853 GPa,which is beneficial for resisting thermal shock cracking.However,excessive resin content(PR-10.0 containing 10.0%(in mass)phenolic resin in the slurry)induces tensile stress due to uneven curing shrinkage,thereby leading to thermal shock cracking.Meanwhile,oxidation tests reveal significantly reduced weight losses for PR-7.5(17.46%at 800℃/100 min,8.15%at 1000℃/120 min,3.15%at 1200℃/120 min)versus uncoated C/CA’s 44.60%loss at 800℃/20 min.This work provides a brand-new and simple approach to improving the anti-oxidation performance of C/CA and expands its application in mild oxidative environments.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
基金financially supported by the National Natural Science Foundation of China (22472199)Chinese Universities Scientific Fund (15055009)Central University Guided Funds for Building World-Class Universities (Disciplines) and Advancing Characteristic Development
文摘Electrocatalytic glucose oxidation to high-value chemicals provides a sustainable route for biomass valorization.NiCo-based catalysts have emerged as promising candidates for glucose oxidation reaction owing to the intrinsic activity of Ni and Co catalytic centers.However,the dynamic evolution and atomic-scale synergy between these centers remain elusive.Herein,we fabricated NiCo_(2)O_(4)nanosheets supported on nickel foam,where Ni preferentially occupies tetrahedral sites to regulate the electronic configuration of octahedral Co.Experimental and theoretical results demonstrate that the incorporation of tetrahedral Ni induces low-to-intermediate spin transition in octahedral Co,thereby optimizing eg orbital occupancy and stabilizing active sites.This spin-state engineering establishes Ni-Co synergistic catalytic centers for the selective oxidation of glucose to formate(FA).At higher potential(≥1.4 V vs.RHE),octahedral Co undergoes reconstruction into excessive active CoOOH and CoO_(2)species,resulting in glucose overoxidation to CO_(2)and intensified competitive oxygen evolution.In contrast,at lower potentials(<1.4 V vs.RHE),tetrahedral Ni facilitates electron delocalization across the Ni–O–Co lattice,thereby stabilizing octahedral Co for glucose adsorption and oxidation.Subsequently,a coupled electrocatalytic system was constructed,achieving 80.7%FA yield with 91.3%Faradaic efficiency(FE)at NiCo_(2)O_(4)anode and H2 evolution rate of 696μmol h^(−1)with 99.9%FE at Pt cathode for 2 h under 1.35 V vs.RHE.This work provides a deep insight into spin-state regulation of the catalytic center,offering valuable guidance for rational catalyst design.
基金supported by the National Natural Science Foundation of China(22279079 and 22472101)Guangdong Science and Technology Department Program(2021QN02L252,2023A1515010021,and 2024A1515011543)Research Team Cultivation Program of Shenzhen University(2023QNT007)。
文摘Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction(HOR)catalysts for proton exchange membrane fuel cells(PEMFCs).However,designing multifunctional synergistic schemes for single-atom sites remains a significant challenge.Herein,we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel(IrNi)atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon(IrNi_(Dimer/NC1.8)-PNC).The paired IrNi dimer features an asymmetric Ir-N_(3)configuration coordinated with heteroatomic Ni-N_(3)O via an N-bridge.Remarkably,IrNi_(Dimer/NC1.8)-PNC exhibits a~23-fold enhancement in mass activity(4.36 A mg-1Ir at 20 mV)and 5-fold longer stability compared to benchmarking Pt/C toward HOR,while achieving a high rated power density of 1.18 W cm^(-2)in PEMFC anode applications.Furthermore,IrNi_(Dimer/NC1.8)-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices.Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions,thereby enhancing HOR activity.Importantly,the asymmetric IrNi dimer enables efficient CO^(*)and OH^(*)co-adsorption while facilitating CO_(2)^(*)desorption,synergistically mitigating CO poisoning and improving atom utilization efficiency.This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
基金supported by grants from the National Natural Science Foundation of China(Nos.22108154,22138006,32171430).
文摘Triterpenoids are valuable medicinal scaffolds,characterized by excellent pharmacological properties and the presence of hydroxyl and carboxyl groups that allow for further structural modifications.Expanding the scope of oxidative modifications on these molecules is crucial for increasing their synthetic structural diversity and unlocking new potential pharmacological activities.However,the progress has been limited by the scarcity of suitable tailoring enzymes.Here,we reported a break-through in achieving targeted and remote dual-site oxidation of licorice triterpenoids using a single P450 mutant.This approach successfully enabled the selective synthesis of the rare triterpenoid,liquiritic acid and 24-OH-liquiritic acid.Our findings demonstrate that microenvironmental accessibility engineering of triterpenoid substrates within the P450 enzyme is essential for continuous and regioselective oxidation.This study not only sheds light on the mechanistic aspects of P450 catalysis but also expands the enzymatic toolkit for selective oxidative modifications in triterpenoid biosynthesis.
基金supported by the National Key R&D Program of China(2021YFA1502802)the National Natural Science Foundation of China(U21B2092,22202213,22402210,22502215,22502214,22572200,and 22579171)+4 种基金the International Partnership Program of Chinese Academy of Sciences(172GJHZ2022028MI)the Shenyang Bureau of Science and Technology(24-213-3-25)the Natural Science Foundation of Liaoning Province(2025BS0153)Zhongke Technology Achievement Transfer and Transformation Center of Henan Province 2025119The XAS experiments were conducted in Beijing Synchrotron Radiation Facility(BSRF)and Shanghai Synchrotron Radiation Facility(SSRF).
文摘Single-atom catalysts(SACs)have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency,distinctive geometric,and electronic configurations.However,the efficacy of SACs remains limited for certain reactions requiring simultaneous activation of multiple reactants over metallic active sites.Herein,we report an atomically dispersed Pt1Ru1 dual-atom pair site anchored on nanodiamond@graphene(ND@G)for CO oxidation.The Pt1Ru1 dual-atom catalyst shows an exceptional turnover frequency(TOF)of 17.6.10^(-2)s^(-1)at significantly lower temperature(30℃),achieving a tenfold increase in TOF compared to singleatom Pt1/ND@G catalyst(1.5.10^(-2)s^(-1))and surpassing to previously reported Pt-based catalysts under similar conditions.Moreover,the catalyst demonstrates excellent stability,maintaining its activity for 40 h at 80℃without significant deactivation.The superior catalytic performance of Pt-Ru dual-atom catalysts is attributed to the synergistic effect between Pt and Ru atoms with enhanced metallicity for improving simultaneous adsorption and activation of CO and O_(2),and the tuning of conventional competitive reactant adsorption into a non-competitive pathway over dual-atom pair sites.The present work manifests the advantages of dual-atom pair sites in heterogeneous catalysis and paves the way for precise design of catalysts at the atomic scale.
基金supported by the National Natural Science Foundation of China(22075040,U21A20330,22131004)the National Key R&D Program of China(2022YFB3805900)+2 种基金the Jilin Provincial Scientific and Technological Development Program(20240602105RC)the Innovation Platform for Academicians of Hainan Provincethe Specific Research Fund of the Innovation Platform for Academicians of Hainan Province(YSPTZX202321)。
文摘The development of efficient photocatalysts for crucial organic transformation,such as aerobic oxidation,remains challenging.Although powdered porous materials offer abundant accessible active sites,their application in liquid-phase catalysis is often limited by insufficient light absorption and inevitable charge recombination,which are inherent drawbacks of conventional heterogeneous catalysts.Here,through rational design and nanoscale-engineering of porous aromatic frameworks(PAFs)comprising porphyrin and porous organic cage,a quasi-homogeneous porous photocatalyst with high catalytic activity and controllable dimension was developed.The interface-directed growth in oil-in-water emulsion shaped the morphology of photoactive PAFs from powders to nanoflakes,which facilitated the light absorbance and catalyst-substrate interaction.Compared with PAF powders,PAF nanoflakes exhibited superior photocatalytic activity for aerobic oxidation.For mustard gas simulant(2-chloroethyl ethyl sulfide,CEES),PAF nanoflakes exhibited ultrafast detoxification rates in room air with a half-life(t_(1/2))as fast as 26s,which even exceeded other catalysts in pure oxygen.It also completely catalyzed the aerobic oxidation of thioether within 15 min,which is almost the fastest rate among any reported organic photocatalysts.Furthermore,the efficient catalytic performance under mild conditions caused by improved light enrichment,surface charge transfer and carrier lifetime was elucidated.
基金support from the Australian Research Council(ARC)Linkage Project(No.LP230100166).
文摘Selective depression of pyrite remains a major bottleneck in copper flotation,particularly when high-pyrite ores are processed and saline water is used.In such environments,conventional approaches using lime and inert grinding media often fail to discriminate ef-fectively between pyrite and valuable copper minerals due to strong copper activation on pyrite surfaces.This study introduced a novel approach using inorganic radicals generated from peroxymonosulfate(PMS)to selectively oxidize and depress pyrite.Flotation tests with synthetic high-pyrite ore blends showed that PMS significantly reduced pyrite recovery while maintaining or improving chalcopyrite flot-ation.Ethylenediaminetetraacetic acid(EDTA)extraction confirmed selective oxidation of pyrite,and electron paramagnetic resonance(EPR)spectroscopy identified hydroxyl(·OH)and sulfate(SO_(4)^(·-))radicals as the dominant reactive species.Iron ions from grinding me-dia and mineral surfaces were identified as key activators of PMS.A major insight was pyrite’s dual role,acting both as a radical scav-enger and an activator,which made it highly reactive and susceptible to radical-induced oxidation.This process converted surface copper-sulfur species into copper hydroxides,effectively suppressing pyrite flotation.While previous studies have applied EPR to detect radicals in simplified activator/precursor systems,this study provides the first direct mechanistic evidence of radical-driven selectivity in flotation by detecting inorganic radicals in a complex flotation slurry,thereby demonstrating their persistence under industrially relevant conditions and establishing a foundation for more effective and targeted flotation strategies.
基金supported by the National Natural Science Foundation of China(Nos.42477406 and 51878617)the Horizontal Scientific Research Project(No.KYY-HX-20220803)the Engineering Research Center of Ministry of Education for Renewable Energy Infrastructure Construction Technology.
文摘In this work,we constructed a three-dimensional electrochemical system(3D-ECO),which included the cathode and anode electrode plates,as well as the screening of three-dimensional particle electrodes and parameter opti-mization,for the degradation of landfill leachate(LL)containing elevated levels of tetracycline(TC),and explored its mechanism of action.Firstly,titanium-based ruthenium-iridium(Ti/RuO_(2)-IrO_(2)),titanium-based ruthenium-iridium-platinum(Ti/Pt-RuO_(2)-IrO_(2)),and titanium-based tin-antimony(Ti/SnO_(2)-Sb_(2)O_(3))were employed as an-odes in the electrocatalytic oxidation system,with titanium and stainless steel plates serving as cathodes,to construct the optimal two-dimensional electrocatalytic oxidation system(2D-ECO)through cross-comparison ex-periments.Subsequently,using granular activated carbon(GAC),coconut shell biochar(CBC),walnut shell carbon(WBC),and bamboo charcoal(BBC)as particle electrodes,a 3D-ECO system was developed.The influence of var-ious operational parameters on treating TC-containing LL was investigated.The optimal operating parameters obtained from the study was:pH=5,current density of 30 mA/cm^(2),particle dosage of 7 g/L,particle size ranging from 1.70 to 2.00 mm,and electrode spacing of 4 cm.Under these conditions,the COD removal rate of 3D-ECO within three hours was 90.25%,the TC removal rate was 72.41%,and the NH_(3)-N removal rate was 39.52%.The removal of TC followed a pseudo-first-order kinetic model.Additionally,degradation mechanisms were elucidated through electron paramagnetic resonance(EPR)spectrometer and Tert-Butanol(TBA)quenching experiments,indicating that the degradation primarily occurred through a non-radical(1O_(2))pathway.This re-search offers a comprehensive analysis of the simultaneous breakdown of intricate LL matrices and TC,enhancing our comprehension of the degradation processes and underlying mechanisms.
基金supported by the National Natural Science Foundation of China(Grant number 22172112)and the Fundamental Research Funds for the Central Universities.
文摘Electrocatalytic oxidation of glycerol for value-added chemicals is a superior strategy to utilize the excess glycerol produced in the biodiesel industry.Pd is one of the few active catalysts for alkaline glycerol oxidation reaction(GOR);however,glycerol inevitably dissociates and converts to carbon dioxide on the Pd surface,which results in its low total Faradaic efficiency(FE)for high-value-added products.Herein,a series of Pd/C and Pd10Bix/C catalysts were synthesized to investigate the GOR pathway.The Pd10Bi3/C catalyst with optimal Bi content achieved an excellent GOR mass activity of 7.5±0.2 A mgPd−1 and an outstanding total FE of 90%±3%,which are much higher than those values on Pd/C(1.2±0.2 A mgPd−1 for mass activity and 63%±4%for total FE).Combined results of in-situ attenuated total reflection surface enhanced infrared absorption spectroscopy and density functional theory calculations show that Bi suppresses the dissociation of glycerol through the“shielding effect”of Bi to the adjacent Pd sites,which weakens the adsorption strength of GOR intermediates on those sites.This work provides a new insight into the GOR mechanism and puts forward a valid strategy for the rational design of catalysts to enable the transformation of glycerol into high-value-added products.
基金supported by the National Natural Science Foundation of China (No.52274304)。
文摘The three-dimensional(3D) Pd-based nanoflower structures,assembled from two-dimensional(2D)nanosheets,are characterized by their stable and ordered configurations.These structures have been extensively designed as anode materials for fuel cells.However,the exploration of trimetallic nanoflowers with porous architectures remains limited.In this study,we present a straightforward one-step solvothermal method for the synthesis of trimetallic Pd Cu Ni porous nanoflowers(PNFs).Leveraging several unique advantages,such as an open superstructure,high porosity,and enhanced electronic interactions among the trimetals,the resulting Pd Cu Ni PNFs demonstrate significantly improved electrochemical performance,with mass activities reaching 5.94 and 10.14 A/mg for the ethanol oxidation reaction(EOR)and the ethylene glycol oxidation reaction(EGOR),respectively.Furthermore,the Pd Cu Ni PNFs exhibit optimized d-band centers and the most negative onset oxidation potential,indicating enhanced antitoxicity and stability.This study not only provides a novel perspective on the synthesis of 3D porous nanomaterials but also highlights the potential application value of trimetallic nanoalloys in catalysis.
基金financially supported by the National Science and Technology Major Project(No.2024ZD1404705)。
文摘An advanced AlCrSiN/AlCrN/CrN/Cr multilayer coating was developed via hybrid multiarc ion plating and high-power impulse magnetron sputtering.The multilayer design enhanced the substrate-coating compatibility,achieving a critical load of 87.8 N.Silicon doping induced nanocrystallization and amorphization,increasing the hardness to 26 GPa.At high temperatures,a nanoscale Cr-rich(Cr,Al)_(2)O_(3) layer was formed,effectively inhibiting oxygen diffusion.The coating underwent unique phase transformations,during which Cr_(2)N and amorphous Si3N4 were converted into dispersed SiCr_(3) nanoparticles,which stabilized Cr atoms and suppressed their outward diffusion.Ab initio molecular dynamics simulations revealed that Cr atoms exhibited higher chemical activity and oxygen-capture capability than Al atoms and Si atoms served as diffusion barriers by pinning onto the oxidized surface,considerably improving the oxidation resistance of the coating.
基金financially supported by the Sichuan Science and Technology Program (Grant No. 2025NSFSC0139)the China Postdoctoral Science Foundation (Grant No.2023MD734228)+10 种基金funding from Generalitat de Catalunya 2021SGR00457supported by MCIN with funding from European Union NextGenerationEU(PRTR-C17.I1)by Generalitat de Catalunya (In-CAEM Project)the support from the project AMaDE(PID2023-149158OB-C43)funded by MCIN/AEI/10.13039/501100011033/by “ERDF A way of making Europe”by the “European Union”supported by the Severo Ochoa program from Spanish MCIN/AEI (Grant No.:CEX2021-001214-S)funded by the CERCA Programme/Generalitat de Catalunyaperformed in the framework of Universitat Autònoma de Barcelona Materials Science PhD programfunding from the CSC-UAB PhD scholarship program. ICN2 is founding member of e-DREAM[87]
文摘The methanol oxidation reaction(MOR)to formic acid offers a promising alternative to the anodic oxygen evolution reaction(OER)in water electrolysis.However,the development of efficient and cost-effective catalysts remains a primary challenge.In this study,an enhancement in catalytic MOR performance is achieved through the incorporation of Mn atoms with unsaturated t_(2g)orbitals into Ni_(3)Se_(4).Comprehensive experimental analyses and theoretical calculations reveal that substituting Ni with Mn induces strong electron-withdrawing effects,effectively modulating the local coordination environment of the metal centers.The presence of Mn also elongates Ni–Se(O)bonds,which reduces eg orbital occupancy and modifies the spin state of the material.Electrochemical measurements demonstrate that electrodes based on this optimized material exhibit a high spin state and deliver excellent catalytic activity,achieving a MOR current density up to∼190 mA cm^(−2)at 1.6 V.This performance enhancement is attributed to the favorable electronic configuration and reduced reaction energy barriers associated with the high-spin state.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金supported by the National Natural Science Foundation of China(52202102,52472215)Key Innovation Project of the Science-Education-Industry Integration Pilot Engineering of Qilu University of Technology(Shandong Academy of Sciences)(2025ZDZX08)+1 种基金Key Research&Development Project of Shandong Province(2024TSGC0222)Interdisciplinary Innovation Guidance Program from Qilu University of Technology(Shandong Academy of Sciences)(2025XKJC0103)。
文摘The effective separation and utilization of photo-generated carriers are of great significance for promoting the development of photocatalysis,especially in the coupled process of photocatalytic H_(2)production and valueadded chemicals synthesis.To realize this goal,a sandwichstructured MnO_(2)@ZnIn_(2)S_(4)@Ti_(3)C_(2)hollow sphere was designed and synthesized,in which MnO_(2)and Ti_(3)C_(2)were loaded on the inner and outer surfaces of ZnIn_(2)S_(4),respectively.In the photocatalytic system,MnO_(2)as oxidation cocatalyst and Ti_(3)C_(2)as reduction cocatalyst can serve as photo-generated holes and electrons collectors,respectively,which boost the photo-generated carrier separation and create a spatially separated redox reaction.Furthermore,the unique hollow structure integrated into the photocatalytic system further endows a significant enhancement in light-harvesting ability.Remarkably,the optimal MnO_(2)@ZnIn_(2)S_(4)@Ti_(3)C_(2)hollow sphere exhibits an outstanding the photocatalytic activity for coupled H_(2)production(6.29 mmol g^(-1)h^(-1))and selective benzyl alcohol oxidation to benzaldehyde(5.26 mmol g^(-1)h^(-1)),which is significantly superior to that of ZnIn_(2)S_(4),MnO_(2)@ZnIn_(2)S_(4),and ZnIn_(2)S_(4)@Ti_(3)C_(2).By the in situ irradiated X-ray photoelectron spectroscopy,the result reveals that the spatially separated redox dual-cocatalysts can effectively impel the photo-generated carrier separation.Simultaneously,the intermediates during the benzyl alcohol oxidation process have also been confirmed through in situ electron paramagnetic resonance spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy.This work provides a reference and inspiration for constructing efficient photocatalysts that achieve an efficient coupling of photocatalytic H_(2)production and value-added chemicals synthesis.
基金the financial support from the National Natural Science Foundation of China(52172110,52472231,52311530113)Shanghai"Science and Technology Innovation Action Plan"intergovernmental international science and technology cooperation project(23520710600)+1 种基金Science and Technology Commission of Shanghai Municipality(22DZ1205600)the Central Guidance on Science and Technology Development Fund of Zhejiang Province(2024ZY01011)。
文摘Investigating structural and hydroxyl group effects in electrooxidation of alcohols to value-added products by solid-acid electrocatalysts is essential for upgrading biomass alcohols.Herein,we report efficient electrocatalytic oxidations of saturated alcohols(C_(1)-C_(6))to selectively form formate using Ni Co hydroxide(Ni Co-OH)derived Ni Co_(2)O_(4)solid-acid electrocatalysts with balanced Lewis acid(LASs)and Brønsted acid sites(BASs).Thermal treatment transforms BASs-rich(89.6%)Ni Co-OH into Ni Co_(2)O_(4)with nearly equal distribution of LASs(53.1%)and BASs(46.9%)which synergistically promote adsorption and activation of OH-and alcohol molecules for enhanced oxidation activity.In contrast,BASs-enriched Ni Co-OH facilitates formation of higher valence metal sites,beneficial for water oxidation.The combined experimental studies and theoretical calculation imply the oxidation ability of C1-C6alcohols increases as increased number of hydroxyl groups and decreased HOMO-LUMO gaps:methanol(C_(1))<ethylene glycol(C_(2))<glycerol(C3)<meso-erythritol(C4)<xylitol(C5)<sorbitol(C6),while the formate selectivity shows the opposite trend from 100 to 80%.This study unveils synergistic roles of LASs and BASs,as well as hydroxyl group effect in electro-upgrading of alcohols using solid-acid electrocatalysts.
基金Supported by the Guangdong Provincial Natural Science Foundation(No.2022A1515010783)the Sustainable Development Program of Shenzhen Science and Technology Major Program(No.KCXFZ20240903093925033)+4 种基金the Guangdong Provincial Special Project in Science and Technology(No.2021A05240)the Special Project in Key Fields of Guangdong Provincial Higher Education Institutions(No.2021ZDZX2064)the Basic Research Project of Shenzhen Science and Technology Innovation Commission(No.JCYJ20220530162014032)the Zhanjiang Marine Youth Talent Innovation Project(No.2022E05010)the Program for Scientific Research Start-up Funds of Guangdong Ocean University(Nos.R18008,060302042201)。
文摘Alzheimer’s disease(AD)is a complex neurodegenerative disorder associated with changes in inflammation,oxidative stress,and gut microbiota composition.Butyrolactone Ⅰ(BTL-Ⅰ),a fungal metabolite,has shown anti-inflammatory,microbiota regulating,and memory-improving potentials in previous in vitro and AlCl3-induced zebrafish studies.However,its effects of memory-improving and gutbrain axis regulating on Aβ-induced mammalian AD models have not been explored.In this study,intragastric administrated BTL-Ⅰ ameliorated cognitive deficits related to recognition and spatial memory impaired by Aβ_(1-42)intracerebroventricular injection in mice.BTL-Ⅰ maintained gut microbiota balance by increasing the abundance of Blautia,Muribaculaceae,Bacteroides,Akkermansia,etc.,and decreasing CAG-352,Clostridia UCG-014,different Lachnospiraceae groups,etc.,and Firmicutes/Bacteroidota ratio and elevated the levels of short-chain fatty acids.Additionally,it alleviated intestinal oxidative stress,inflammatory responses,and pathological damage.Furthermore,BTL-I reversed Aβ_(1-42)-induced activation of microglia and astrocytes in the hippocampus and inhibited the elevated oxidative stress and proinflammatory cytokines in both plasma and brain.The correlation analysis between the regulated taxa and biomarkers supports the role of gut microbiota in adjusting inflammation,oxidative stress,and memory.In conclusion,BTL-I may serve as a valuable drug lead for treating Alzheimer’s disease by systematically inhibiting microbiota imbalance,inflammation,and oxidative stress along the gut-brain axis.
