In this paper, we present a nonorthogonal overlapping Yee method for solv- ing Maxwell＇s equations using the diagonal split-cell model. When material interface is presented, the diagonal split-cell model does not req...In this paper, we present a nonorthogonal overlapping Yee method for solv- ing Maxwell＇s equations using the diagonal split-cell model. When material interface is presented, the diagonal split-cell model does not require permittivity averaging so that better accuracy can be achieved. Our numerical results on optical force computation show that the standard FDTD method converges linearly, while the proposed method achieves quadratic convergence and better accuracy.展开更多
Pseudospectral method is an efficient and high accuracy numerical method for simulating seismic wave propaga- tion in heterogeneous earth medium. Since its derivative operator is global, this method is commonly consid...Pseudospectral method is an efficient and high accuracy numerical method for simulating seismic wave propaga- tion in heterogeneous earth medium. Since its derivative operator is global, this method is commonly considered not suitable for parallel computation. In this paper, we introduce the parallel overlap domain decomposition scheme and give a parallel pseudospectral method implemented on distributed memory PC cluster system for modeling seismic wave propagation in heterogeneous medium. In this parallel method, the medium is decomposed into several subdomains and the wave equations are solved in each subdomain simultaneously. The solutions in each subdomain are connected through the transferring at the overlapped region. Using 2D models, we compared the parallel and traditional pseudospectral method, analyzed the accuracy of the parallel method. The results show that the parallel method can efficiently reduce computation time for the same accuracy as the traditional method. This method could be applied to large scale modeling of seismic wave propagation in 3D heterogeneous medium.展开更多
A bilogarithmic hyperbolic cosine method for the evaluation of overlapping formation constants at varying (or fixed) ionic strength is devised in this paper and applied to data reported in the analytical literature, i...A bilogarithmic hyperbolic cosine method for the evaluation of overlapping formation constants at varying (or fixed) ionic strength is devised in this paper and applied to data reported in the analytical literature, i.e. succinic acid system, Cu(II)-glycine system and Ag(I)-aminobutan-1-ol system. The method is based on the linearization of the formation function ? = f(pH) or ? = f(pL) data. A theoretical slope of unity should be obtained thus proving the correctness of the assumed equilibria. An additional advantage of the bilogarithmic method proposed is that it provides a closed scale representation of Y and X unlike other plots. This paper forms part of an investigation into the uses of bilogarithmic methods and hyperbolic functions in parameter estimation. Methods based on the application of spectrophotometric measurements have been the subject of recent studies.展开更多
An online hybrid test was carried out on a 40-story 120-m high concrete shear wall structure. The structure was divided into two substructures whereby a physical model of the bottom three stories was tested in the lab...An online hybrid test was carried out on a 40-story 120-m high concrete shear wall structure. The structure was divided into two substructures whereby a physical model of the bottom three stories was tested in the laboratory and the upper 37 stories were simulated numerically using ABAQUS. An overlapping domain method was employed for the bottom three stories to ensure the validity of the boundary conditions of the superstructure. Mixed control was adopted in the test. Displacement control was used to apply the horizontal displacement, while two controlled force actuators were applied to simulate the overturning moment, which is very large and cannot be ignored in the substructure hybrid test of high-rise buildings. A series of tests with earthquake sources of sequentially increasing intensities were carried out. The test results indicate that the proposed hybrid test method is a solution to reproduce the seismic response of high-rise concrete shear wall buildings. The seismic performance of the tested precast high-rise building satisfies the requirements of the Chinese seismic design code.展开更多
The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single l...The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single laser shock with square and round laser spot is predicted and validated by experimental results. With the Finite Element Method （FEM） model, effects of different overlapping rates and impact sequences on the distribution of residual stresses are simulated. The results indicate that： （1） Overlapping laser shock can increase the compressive residual stresses. However, it is not effective on the growth of plastically affected depth; （2） Overlapping rate should be optimized and selected carefully for the large area treatment. Appropriate overlapping rate is beneficial to obtain a homogeneous residual stress field; （3） The impact sequence has a great effect on the residual stress field. It can greatly attenuate the phenomenon of the “residual stress hole” to obtain a homogeneous residual stress field.展开更多
In this paper,we propose a local fuzzy method based on the idea of ＂p-strong＂ community to detect the disjoint and overlapping communities in networks.In the method,a refined agglomeration rule is designed for agglo...In this paper,we propose a local fuzzy method based on the idea of ＂p-strong＂ community to detect the disjoint and overlapping communities in networks.In the method,a refined agglomeration rule is designed for agglomerating nodes into local communities,and the overlapping nodes are detected based on the idea of making each community strong.We propose a contribution coefficient bvcito measure the contribution of an overlapping node to each of its belonging communities,and the fuzzy coefficients of the overlapping node can be obtained by normalizing the bvci to all its belonging communities.The running time of our method is analyzed and varies linearly with network size.We investigate our method on the computergenerated networks and real networks.The testing results indicate that the accuracy of our method in detecting disjoint communities is higher than those of the existing local methods and our method is efficient for detecting the overlapping nodes with fuzzy coefficients.Furthermore,the local optimizing scheme used in our method allows us to partly solve the resolution problem of the global modularity.展开更多
A class of nonlinear parabolic equation on a polygonal domain Ω R2 is inves- tigated in this paper. We introduce a finite element method on overlapping non-matching grids for the nonlinear parabolic equation based o...A class of nonlinear parabolic equation on a polygonal domain Ω R2 is inves- tigated in this paper. We introduce a finite element method on overlapping non-matching grids for the nonlinear parabolic equation based on the partition of unity method. We give the construction and convergence analysis for the semi-discrete and the fully discrete finite element methods. Moreover, we prove that the error of the discrete variational problem has good approximation properties. Our results are valid for any spatial dimensions. A numerical example to illustrate the theoretical results is also given.展开更多
In order to establish a new method for measuring the dimensions of coarse aggregates, five different-size flat and elongated (F&E) coarse aggregates were glued into two specimens by epoxy resin, respectively, and ...In order to establish a new method for measuring the dimensions of coarse aggregates, five different-size flat and elongated (F&E) coarse aggregates were glued into two specimens by epoxy resin, respectively, and slice images were obtained by X-ray CT, then the aggregates were extracted by the fuzzy c-means clustering algorithm. Attributions of the particle on different cross-sections were determined by the ‘overlap area method’. And unified three-dimensional Cartesian coordinate system was established based on continuous slice images. The coefficient values of spherical harmonics descriptor representing particles surface profile were gained, then each scanned particle was represented by 60×120 discrete points conformably with spherical harmonics descriptor. The chord length and direction angles were determined by the calculation. With the major axis (L) and orthogonal axis (W and T), the calculated results were compared with those measured by caliper. It is concluded that the new L, W, and T dimension measuring method is able to take the place of the present manual measurement.展开更多
Based on domain decomposition, a parallel two-level finite element method for the stationary Navier-Stokes equations is proposed and analyzed. The basic idea of the method is first to solve the Navier-Stokes equations...Based on domain decomposition, a parallel two-level finite element method for the stationary Navier-Stokes equations is proposed and analyzed. The basic idea of the method is first to solve the Navier-Stokes equations on a coarse grid, then to solve the resulted residual equations in parallel on a fine grid. This method has low communication complexity. It can be implemented easily. By local a priori error estimate for finite element discretizations, error bounds of the approximate solution are derived. Numerical results are also given to illustrate the high efficiency of the method.展开更多
This paper presents an experimental investigation of laser overlap welding of low carbon galvanized steel. Based on a structured experimental design using the Taguchi method, the investigation is focused on the evalua...This paper presents an experimental investigation of laser overlap welding of low carbon galvanized steel. Based on a structured experimental design using the Taguchi method, the investigation is focused on the evaluation of various laser welding parameters effects on the welds quality. Welding experiments are conducted using a 3 kW Nd:YAG laser source. The selected laser welding parameters (laser power, welding speed, laser fiber diameter, gap between sheets and sheets thickness) are combined and used to evaluate the variation of three geometrical characteristics of the weld (penetration depth, bead width at the surface and bead width at the interface). Various improved statistical tools are used to analyze the effects of welding parameters on the variation of the weld quality and to identify the possible relationship between these parameters and the geometrical characteristics of the weld. The results reveal that the reached hardness values are similar for all the experimental tests and all welding parameters are relevant to the weld quality with a relative predominance of laser power and welding speed. The effect of the gap is relatively limited. The investigation results reveal also that there are many options to consider for building an efficient welds quality prediction model. Results achieved using an artificial neural network based simplified model provide an indication of the prediction model performances.展开更多
By using wavelet analysis and the co-deduct method, under the condition that two explosions are supposed to have the same mechanism and strength, we separated the overlapped recordings successfully.
The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the...The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the effect of the distance between the two tunnels, the stiffness and density of the lining material, and the incident frequency on the seismic response of the tunnels is investigated. Numerical results demonstrate that the dynamic interaction between the twin tunnels cannot be ignored and the lower tunnel has a significant shielding effect on the upper tunnel for high-frequency incident waves, resulting in great decrease of the dynamic hoop stress in the upper tunnel; for the low-frequency incident waves, in contrast, the lower tunnel can lead to amplification effect on the upper tunnel. It also reveals that the frequency-spectrum characteristics of dynamic stress of the lower tunnel are significantly different from those of the upper tunnel. In addition, for incident P waves in low-frequency region, the soft lining tunnels have significant amplification effect on the surface displacement amplitude, which is slightly larger than that of the corresponding single tunnel.展开更多
A basic calculation procedure for the MOSMO method under CNDO/2 approximation is presented in this paper,and performed by using the same parameters as those used in the ordinary CNDO/2 LCAO-MO calculation.The calculat...A basic calculation procedure for the MOSMO method under CNDO/2 approximation is presented in this paper,and performed by using the same parameters as those used in the ordinary CNDO/2 LCAO-MO calculation.The calculated results on the whole are close to those obtained by use of the ordinary CNDO/2 LCAO-MO calculation,illustrating that the presented procedure is reasonable.Due to its simplicity,the presented calculation procedure may be feasible even in very large molecular s ystems.展开更多
为研究小型气垫船的静水面垫升性能,采用STAR-CCM+仿真软件将DFBI(dynamic fluid body interaction)运动与重叠网格方法相结合,基于雷诺平均-斯托克斯(RANS)湍流模型和可实现的K-Epsilon两层模型对气垫船静水面垫升性能进行数值模拟。...为研究小型气垫船的静水面垫升性能,采用STAR-CCM+仿真软件将DFBI(dynamic fluid body interaction)运动与重叠网格方法相结合,基于雷诺平均-斯托克斯(RANS)湍流模型和可实现的K-Epsilon两层模型对气垫船静水面垫升性能进行数值模拟。利用虚拟盘体模型和体积力螺旋桨法对船体和螺旋桨的流场相互作用进行建模,分别计算了当螺旋桨转速为6000 r/min时,气垫船空载/负载100 kg/负载200 kg 3种工况下的泄流高度并与试验结果进行比较分析。研究表明:3种工况下的仿真计算泄流高度值与试验结果误差均保持在8%以内,吻合较好,进一步验证了方案的可信度。为未来评估和预测气垫船静水面垫升性能提供了一种有效手段。展开更多
基金supported by the Air Force Office of Scientific Research (AFOSR) under Grant numbers FA9550-04-1-0213 and FA9550-07-1-0010
文摘In this paper, we present a nonorthogonal overlapping Yee method for solv- ing Maxwell＇s equations using the diagonal split-cell model. When material interface is presented, the diagonal split-cell model does not require permittivity averaging so that better accuracy can be achieved. Our numerical results on optical force computation show that the standard FDTD method converges linearly, while the proposed method achieves quadratic convergence and better accuracy.
基金National Natural Science Foundation of China (40474012 and 40521002)
文摘Pseudospectral method is an efficient and high accuracy numerical method for simulating seismic wave propaga- tion in heterogeneous earth medium. Since its derivative operator is global, this method is commonly considered not suitable for parallel computation. In this paper, we introduce the parallel overlap domain decomposition scheme and give a parallel pseudospectral method implemented on distributed memory PC cluster system for modeling seismic wave propagation in heterogeneous medium. In this parallel method, the medium is decomposed into several subdomains and the wave equations are solved in each subdomain simultaneously. The solutions in each subdomain are connected through the transferring at the overlapped region. Using 2D models, we compared the parallel and traditional pseudospectral method, analyzed the accuracy of the parallel method. The results show that the parallel method can efficiently reduce computation time for the same accuracy as the traditional method. This method could be applied to large scale modeling of seismic wave propagation in 3D heterogeneous medium.
文摘A bilogarithmic hyperbolic cosine method for the evaluation of overlapping formation constants at varying (or fixed) ionic strength is devised in this paper and applied to data reported in the analytical literature, i.e. succinic acid system, Cu(II)-glycine system and Ag(I)-aminobutan-1-ol system. The method is based on the linearization of the formation function ? = f(pH) or ? = f(pL) data. A theoretical slope of unity should be obtained thus proving the correctness of the assumed equilibria. An additional advantage of the bilogarithmic method proposed is that it provides a closed scale representation of Y and X unlike other plots. This paper forms part of an investigation into the uses of bilogarithmic methods and hyperbolic functions in parameter estimation. Methods based on the application of spectrophotometric measurements have been the subject of recent studies.
基金State Key Research Project in 13th Five-Year under Grant No.2016YFC0701901the Beijing Science and Technology Program under Grant No.Z161100001216015the Natural Science Foundation of China under Grants Nos.51422809 and 51778342
文摘An online hybrid test was carried out on a 40-story 120-m high concrete shear wall structure. The structure was divided into two substructures whereby a physical model of the bottom three stories was tested in the laboratory and the upper 37 stories were simulated numerically using ABAQUS. An overlapping domain method was employed for the bottom three stories to ensure the validity of the boundary conditions of the superstructure. Mixed control was adopted in the test. Displacement control was used to apply the horizontal displacement, while two controlled force actuators were applied to simulate the overturning moment, which is very large and cannot be ignored in the substructure hybrid test of high-rise buildings. A series of tests with earthquake sources of sequentially increasing intensities were carried out. The test results indicate that the proposed hybrid test method is a solution to reproduce the seismic response of high-rise concrete shear wall buildings. The seismic performance of the tested precast high-rise building satisfies the requirements of the Chinese seismic design code.
文摘The finite element method is presented to attain the numerical simulation of the residual stresses field in the material treated by laser shock processing. The distribution of residual stresses generated by a single laser shock with square and round laser spot is predicted and validated by experimental results. With the Finite Element Method （FEM） model, effects of different overlapping rates and impact sequences on the distribution of residual stresses are simulated. The results indicate that： （1） Overlapping laser shock can increase the compressive residual stresses. However, it is not effective on the growth of plastically affected depth; （2） Overlapping rate should be optimized and selected carefully for the large area treatment. Appropriate overlapping rate is beneficial to obtain a homogeneous residual stress field; （3） The impact sequence has a great effect on the residual stress field. It can greatly attenuate the phenomenon of the “residual stress hole” to obtain a homogeneous residual stress field.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51278101 and 51578149)the Science and Technology Program of Ministry of Transport of China(Grant No.2015318J33080)+1 种基金the Jiangsu Provincial Post-doctoral Science Foundation,China(Grant No.1501046B)the Fundamental Research Funds for the Central Universities,China(Grant No.Y0201500219)
文摘In this paper,we propose a local fuzzy method based on the idea of ＂p-strong＂ community to detect the disjoint and overlapping communities in networks.In the method,a refined agglomeration rule is designed for agglomerating nodes into local communities,and the overlapping nodes are detected based on the idea of making each community strong.We propose a contribution coefficient bvcito measure the contribution of an overlapping node to each of its belonging communities,and the fuzzy coefficients of the overlapping node can be obtained by normalizing the bvci to all its belonging communities.The running time of our method is analyzed and varies linearly with network size.We investigate our method on the computergenerated networks and real networks.The testing results indicate that the accuracy of our method in detecting disjoint communities is higher than those of the existing local methods and our method is efficient for detecting the overlapping nodes with fuzzy coefficients.Furthermore,the local optimizing scheme used in our method allows us to partly solve the resolution problem of the global modularity.
基金Supported by the Natural Science Foundation of Hunan under Grant No. 06C713.
文摘A class of nonlinear parabolic equation on a polygonal domain Ω R2 is inves- tigated in this paper. We introduce a finite element method on overlapping non-matching grids for the nonlinear parabolic equation based on the partition of unity method. We give the construction and convergence analysis for the semi-discrete and the fully discrete finite element methods. Moreover, we prove that the error of the discrete variational problem has good approximation properties. Our results are valid for any spatial dimensions. A numerical example to illustrate the theoretical results is also given.
基金Project(51038004) supported by the National Natural Science Foundation of ChinaProject(2009318000078) supported by the Western China Communications Construction and Technology Program, China
文摘In order to establish a new method for measuring the dimensions of coarse aggregates, five different-size flat and elongated (F&E) coarse aggregates were glued into two specimens by epoxy resin, respectively, and slice images were obtained by X-ray CT, then the aggregates were extracted by the fuzzy c-means clustering algorithm. Attributions of the particle on different cross-sections were determined by the ‘overlap area method’. And unified three-dimensional Cartesian coordinate system was established based on continuous slice images. The coefficient values of spherical harmonics descriptor representing particles surface profile were gained, then each scanned particle was represented by 60×120 discrete points conformably with spherical harmonics descriptor. The chord length and direction angles were determined by the calculation. With the major axis (L) and orthogonal axis (W and T), the calculated results were compared with those measured by caliper. It is concluded that the new L, W, and T dimension measuring method is able to take the place of the present manual measurement.
基金Project supported by the National Natural Science Foundation of China(No.11001061)the Science and Technology Foundation of Guizhou Province of China(No.[2008]2123)
文摘Based on domain decomposition, a parallel two-level finite element method for the stationary Navier-Stokes equations is proposed and analyzed. The basic idea of the method is first to solve the Navier-Stokes equations on a coarse grid, then to solve the resulted residual equations in parallel on a fine grid. This method has low communication complexity. It can be implemented easily. By local a priori error estimate for finite element discretizations, error bounds of the approximate solution are derived. Numerical results are also given to illustrate the high efficiency of the method.
文摘This paper presents an experimental investigation of laser overlap welding of low carbon galvanized steel. Based on a structured experimental design using the Taguchi method, the investigation is focused on the evaluation of various laser welding parameters effects on the welds quality. Welding experiments are conducted using a 3 kW Nd:YAG laser source. The selected laser welding parameters (laser power, welding speed, laser fiber diameter, gap between sheets and sheets thickness) are combined and used to evaluate the variation of three geometrical characteristics of the weld (penetration depth, bead width at the surface and bead width at the interface). Various improved statistical tools are used to analyze the effects of welding parameters on the variation of the weld quality and to identify the possible relationship between these parameters and the geometrical characteristics of the weld. The results reveal that the reached hardness values are similar for all the experimental tests and all welding parameters are relevant to the weld quality with a relative predominance of laser power and welding speed. The effect of the gap is relatively limited. The investigation results reveal also that there are many options to consider for building an efficient welds quality prediction model. Results achieved using an artificial neural network based simplified model provide an indication of the prediction model performances.
基金This project was sponsored by the Joint Earthquake Science Foundation, CSB (No. 197010).
文摘By using wavelet analysis and the co-deduct method, under the condition that two explosions are supposed to have the same mechanism and strength, we separated the overlapped recordings successfully.
基金supported by the Tianjin Research Program of Application Foundation Advanced Technology (14JCYBJC21900)the National Natural Science Foundation of China under grants 51278327
文摘The scattering of plane harmonic P and SV waves by a pair of vertically overlapping lined tunnels buried in an elastic half space is solved using a semi-analytic indirect boundary integration equation method. Then the effect of the distance between the two tunnels, the stiffness and density of the lining material, and the incident frequency on the seismic response of the tunnels is investigated. Numerical results demonstrate that the dynamic interaction between the twin tunnels cannot be ignored and the lower tunnel has a significant shielding effect on the upper tunnel for high-frequency incident waves, resulting in great decrease of the dynamic hoop stress in the upper tunnel; for the low-frequency incident waves, in contrast, the lower tunnel can lead to amplification effect on the upper tunnel. It also reveals that the frequency-spectrum characteristics of dynamic stress of the lower tunnel are significantly different from those of the upper tunnel. In addition, for incident P waves in low-frequency region, the soft lining tunnels have significant amplification effect on the surface displacement amplitude, which is slightly larger than that of the corresponding single tunnel.
文摘A basic calculation procedure for the MOSMO method under CNDO/2 approximation is presented in this paper,and performed by using the same parameters as those used in the ordinary CNDO/2 LCAO-MO calculation.The calculated results on the whole are close to those obtained by use of the ordinary CNDO/2 LCAO-MO calculation,illustrating that the presented procedure is reasonable.Due to its simplicity,the presented calculation procedure may be feasible even in very large molecular s ystems.
文摘为研究小型气垫船的静水面垫升性能,采用STAR-CCM+仿真软件将DFBI(dynamic fluid body interaction)运动与重叠网格方法相结合,基于雷诺平均-斯托克斯(RANS)湍流模型和可实现的K-Epsilon两层模型对气垫船静水面垫升性能进行数值模拟。利用虚拟盘体模型和体积力螺旋桨法对船体和螺旋桨的流场相互作用进行建模,分别计算了当螺旋桨转速为6000 r/min时,气垫船空载/负载100 kg/负载200 kg 3种工况下的泄流高度并与试验结果进行比较分析。研究表明:3种工况下的仿真计算泄流高度值与试验结果误差均保持在8%以内,吻合较好,进一步验证了方案的可信度。为未来评估和预测气垫船静水面垫升性能提供了一种有效手段。
