In order to study water transfer characteristics inside non-saturated media during methane hydrate formation and dissociation processes,water changes on the top,middle and bottom locations of experimental media during...In order to study water transfer characteristics inside non-saturated media during methane hydrate formation and dissociation processes,water changes on the top,middle and bottom locations of experimental media during the reaction processes were continuously followed with a novel apparatus with three pF-meter sensors.Coarse sand,fine sand and loess were chosen as experimental media.It was experimentally observed that methane hydrate was easier formed inside coarse sand and fine sand than inside loess.Methane hydrate formation configuration and water transfer characteristics during methane hydrate formation processes were very different among the different non-saturated media,which were important for understanding methane hydrate formation and dissociation mechanism inside sediments in nature.展开更多
The effective extracting Cr(Ⅵ) from chromite ore processing residue(COPR) is the key to achieve COPR detoxification and recovery.We developed an effective method to extract Cr(Ⅵ) from COPR via controlling the phase ...The effective extracting Cr(Ⅵ) from chromite ore processing residue(COPR) is the key to achieve COPR detoxification and recovery.We developed an effective method to extract Cr(Ⅵ) from COPR via controlling the phase transformation of Cr(Ⅵ)-containing minerals.Characteristic analysis showed that Cr(Ⅵ) was mainly incorporated in the hydrocalumite(NaCa4Al2O6(SO4/CrO4)1.5-15H2O) in COPR,which was a layered-double hydroxide(LDH) with multilayer structure.In the hydrothermal treatment experiments,the Na2CO3 solution showed significant extraction effect of Cr(Ⅵ) and detoxification effect of COPR.After treatment,95% of Cr(Ⅵ) was removed and the Cr(Ⅵ) concentration in the leachate was decreased to 1.6 mg/L by the toxicity characteristic leaching procedure(TCLP),within the regulatory limit disposal standard(HJ/T 301-2007,3 mg/L).Further study revealed that,during the treatment,hydrocalumite transformed into calcite(CaCO3) under the effect of mineralizer,therefore,the layered structure collapsed and the incorporated Cr(Ⅵ) was released to the supernatant.Meanwhile,the Cr(Ⅵ)desorbed from calcite with the calcite particles grew into large size with smooth surface.Stir-flow experiment revealed that the amount of chromium released from CORP to the environment was significantly reduced after treatment,and it is safer for landfill disposal.This work will provide an instructive guidance for the detoxification and recovery of COPR.展开更多
The main objective of this paper is to investigate and analyse the thermo-hydro-mechanical（THM） coupling phenomena and their influences on the repository safety.In this paper,the high-level waste（HLW） disposal con...The main objective of this paper is to investigate and analyse the thermo-hydro-mechanical（THM） coupling phenomena and their influences on the repository safety.In this paper,the high-level waste（HLW） disposal concept in drifts in clay formation with backfilled bentonite buffer is represented numerically using the CODE BRIGHT developed by the Technical University of Catalonia in Barcelona.The parameters of clay and bentonite used in the simulation are determined by laboratory and in situ experiments.The calculation results are presented to show the hydro-mechanical（HM） processes during the operation phase and the THM processes in the after-closure phase.According to the simulation results,the most probable critical processes for the disposal project have been represented and analyzed.The work also provides an input for additional development regarding the design,assessment and validation of the HLW disposal concept.展开更多
The aim of this work is mathematical education through the knowledge system and mathematical modeling. A net model of formation of mathematical knowledge as a deductive theory is suggested here. Within this model the ...The aim of this work is mathematical education through the knowledge system and mathematical modeling. A net model of formation of mathematical knowledge as a deductive theory is suggested here. Within this model the formation of deductive theory is represented as the development of a certain informational space, the elements of which are structured in the form of the orientated semantic net. This net is properly metrized and characterized by a certain system of coverings. It allows injecting net optimization parameters, regulating qualitative aspects of knowledge system under consideration. To regulate the creative processes of the formation and realization of mathematical know- edge, stochastic model of formation deductive theory is suggested here in the form of branching Markovian process, which is realized in the corresponding informational space as a semantic net. According to this stochastic model we can get correct foundation of criterion of optimization creative processes that leads to “great main points” strategy (GMP-strategy) in the process of realization of the effective control in the research work in the sphere of mathematics and its applications.展开更多
The prevailing idea so far about why the rainfall occurs was that after agglutination of water droplets with condensation nuclei, the size of the particle formed by the condensation nuclei connected with droplets of w...The prevailing idea so far about why the rainfall occurs was that after agglutination of water droplets with condensation nuclei, the size of the particle formed by the condensation nuclei connected with droplets of water increased considerably and caused its fall. This idea has led to numerous scientific publications in which empirical distribution functions of clouds’ water droplets sizes were proposed. Estimates values provided by these empirical distribution functions, in most cases, were validated by comparison with UHF Radar measurements. The condensation nuclei concept has not been sufficiently exploited and this has led meteorologists to error, in their attempt to describe the clouds, thinking that clouds were formed by liquid water droplets. Indeed, MBANE BIOUELE paradox (2005) confirms this embarrassing situation. In fact, when applying Archimedes theorem to a liquid water droplet suspended in the atmosphere, we obtain a meaningless inequality ?which makes believe that the densities of pure water in liquid and solid phases are much lower than that of the atmosphere considered at the sea level. This meaningless inequality is easy to contradict: of course, if you empty a bottle of pure liquid water in the ocean (where z is equal to 0), this water will not remain suspended in the air, i.e., application of Archimedes’ theorem allows realizing that there is no liquid (or solid) water droplet, suspended in the clouds. Indeed, all liquid (or solid) water droplets which are formed in clouds, fall under the effect of gravity and produce rains. This means that our current description of the clouds is totally wrong. In this study, we describe the clouds as a gas composed of dry air and saturated water vapor whose optical properties depend on temperature, i.e., when the temperature of a cloud decreases, the color of this gaseous system tends towards white.展开更多
Rare metals including Lithium(Li),Beryllium(Be),Rubidium(Rb),Cesium(Cs),Zirconium(Zr),Hafnium(Hf),Niobium(Nb),Tantalum(Ta),Tungsten(W)and Tin(Sn)are important critical mineral resources.In China,rare metal mineral dep...Rare metals including Lithium(Li),Beryllium(Be),Rubidium(Rb),Cesium(Cs),Zirconium(Zr),Hafnium(Hf),Niobium(Nb),Tantalum(Ta),Tungsten(W)and Tin(Sn)are important critical mineral resources.In China,rare metal mineral deposits are spatially distributed mainly in the Altay and Southern Great Xingán Range regions in the Central Asian orogenic belt;in the Middle Qilian,South Qinling and East Qinling mountains regions in the Qilian-Qinling-Dabie orogenic belt;in the Western Sichuan and Bailongshan-Dahongliutan regions in the Kunlun-Songpan-Garze orogenic belt,and in the Northeastern Jiangxi,Northwestern Jiangxi,and Southern Hunan regions in South China.Major ore-forming epochs include Indosinian(mostly 200-240 Ma,in particular in western China)and the Yanshanian(mostly 120-160 Ma,in particular in South China).In addition,Bayan Obo,Inner Mongolia,northeastern China,with a complex formation history,hosts the largest REE and Nb deposits in China.There are six major rare metal mineral deposit types in China:Highly fractionated granite;Pegmatite;Alkaline granite;Carbonatite and alkaline rock;Volcanic;and Hydrothermal types.Two further types,namely the Leptynite type and Breccia pipe type,have recently been discovered in China,and are represented by the Yushishan Nb-Ta-(Zr-Hf-REE)and the Weilasituo Li-Rb-Sn-W-Zn-Pb deposits.Several most important controlling factors for rare metal mineral deposits are discussed,including geochemical behaviors and sources of the rare metals,highly evolved magmatic fractionation,and structural controls such as the metamorphic core complex setting,with a revised conceptual model for the latter.展开更多
We studied the formation of heartwood in Ery- throphleumfordii Oliv., an endangered rosewood species, by cross-section analysis on 52 stumps aged 28-57 years and arbitrarily sampled from natural forests in South China...We studied the formation of heartwood in Ery- throphleumfordii Oliv., an endangered rosewood species, by cross-section analysis on 52 stumps aged 28-57 years and arbitrarily sampled from natural forests in South China. Width and area of heartwood were positively correlated with age and xylem width （XW）, and were independent of annual radial growth. The proportions of heartwood and sapwood areas were equal at about 40 years. The heartwood formation pro- cess was simulated by linear regression of age and XW.展开更多
The influence of iron ore characteristics on FeO formation during sintering was examined mainly in terms of chemical composition and the melting characteristics of iron ores. Statistical regression and X-ray diffracti...The influence of iron ore characteristics on FeO formation during sintering was examined mainly in terms of chemical composition and the melting characteristics of iron ores. Statistical regression and X-ray diffraction were used to further explain the specific effect of iron ore characteristics on FeO formation. The results indicate that LOI （loss on ignition） in iron ores have a positive influence on FeO formation by promoting the sintering process of Fe2O3 decomposing and reducing. Silica contents in iron ores play a determining role in final content of FeO in sinter. The melting characteristics of iron ores significantly affect FeO formation during sintering.展开更多
The feasibility was investigated to substitute chrome-free passivation treatment of electrodeposited zinc in a titanium bath for chromate passivation treatment. The formation mechanism of the chrome-free passivation f...The feasibility was investigated to substitute chrome-free passivation treatment of electrodeposited zinc in a titanium bath for chromate passivation treatment. The formation mechanism of the chrome-free passivation film was further analyzed. The surface mor- phologies and the elemental compositions of the treated samples with varied immersion times were observed by scanning electron mi- croscopy （SEM） and determined by energy dispersion spectrometry （EDS）, respectively. The electrode potential of the sample surface was recorded in the film formation process. The changes of the electrode potential are in accordance with that of SEM and EDS of the sample surface. The results of X-ray photoelectron spectroscopy （XPS） show the chrome-free passivation film composed ofZnO, SiO2, TiO2, Zn4Si207（OH）2, and SrF2. The anode zinc dissolution and the local pH value increase due to the cathode hydrogen ion reduction process result in the formation of the chrome-free passivation film. The macro-images of the chrome-free passivation films formed on electrodeposited zinc show that the color of the film changes from blue to iridescence with the increase of the immersion times.展开更多
Dioxins, which are of the most toxic materials on the earth, are principal emitted from waste incineration process. The molecular structures, toxicity parameters, such as toxicity equivalency factor, tolerable daily i...Dioxins, which are of the most toxic materials on the earth, are principal emitted from waste incineration process. The molecular structures, toxicity parameters, such as toxicity equivalency factor, tolerable daily intake and physic-chemical properties of dioxins are briefly summarized. Three formation mechanisms of dioxins in waste incineration process, namely as de novo synthesis, mechanisms involving small organic molecular as precursors and homogenous gas phase reaction mechanism are alto reviewed. The influencing factors for dioxins formation during waste incineration process are also discussed. Three major methods for reducing dioxins emission from waste incineration process are discussed based upon the formation mechanisms and influencing factors. A new waste incineration process with low dioxins emission and low hydrogen chloride corrosion has been proposed based on multi- stage unit operation principal according to formation mechanisms of dioxins and potential production location in waste incinerators.展开更多
Hydrogen-based mineral phase transformation(HMPT)technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores.However,further research is needed to clarify ...Hydrogen-based mineral phase transformation(HMPT)technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores.However,further research is needed to clarify the phase composition and floatability of rare earths obtained after HMPT owing to the associated phase transformations.This study explored the mineralogical characteristics and separation behavior of rare earths in HMPT-treated iron tailings.Process mineralogy studies conducted via BGRIMM process mineralogy analysis and X-ray diffraction revealed that the main valuable minerals in the tailings included rare-earth oxides(9.15wt%),monazite(5.31wt%),and fluorite(23.52wt%).The study also examined the impact of mineral liberation and gangue mineral intergrowth on flotation performance.Flotation tests achieved a rare-earth oxide(REO)grade of 74.12wt% with a recovery of 34.17% in open-circuit flotation,whereas closed-circuit flotation resulted in a REO grade of 60.27wt% with a recovery of 73%.Transmission electron microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy revealed that monazite remained stable during the HMPT process,while bastnaesite was transformed into Ce_(7)O_(12)and CeF_(3),leading to increased collector consumption.Nonetheless,the HMPT process did not significantly affect the flotation performance of rare earths.The enrichment of fluorite in the tailings highlighted its further recovery potential.The integration of HMPT with magnetic separation and flotation presents an efficient strategy for recovering rare earths,iron,and fluorite from Bayan Obo ores.展开更多
In view of strong heterogeneity and complex formation and evolution of organic pores,field emission scanning electron microscopy(FESEM),Raman spectrum and fluid injection+CT/SEM imaging technology were used to study t...In view of strong heterogeneity and complex formation and evolution of organic pores,field emission scanning electron microscopy(FESEM),Raman spectrum and fluid injection+CT/SEM imaging technology were used to study the macerals,organic pores and connectivity of organic pores in the lower Paleozoic organic-rich shale samples from Southern China.Combined with the mechanism of hydrocarbon generation and expulsion and pore forming mechanism of organic matter-based activated carbon,the relationships between organic pore development and the organic matter type,hydrocarbon generation process,diagenesis and pore pressure were explored to reveal the controlling factors of the formation,preservation and connectivity of organic pores in shale.(1)The generation of organic pores goes on through the whole hydrocarbon generation process,and is controlled by the type,maturity and decomposition of organic matter;the different hydrocarbon generation components and differential hydrocarbon-generation evolution of kerogen and solid asphalt lead to different pore development characteristics;organic pores mainly develop in solid bitumen and hydrogen-rich kerogen.(2)The preservation of organic pores is controlled by maturity and diagenesis,including the steric hindrance effect of in-situ hydrocarbon retention,rigid mineral framework formed by recrystallization,the coupling mechanism of pore-fluid pressure and shale brittleness-ductility transition.(3)The Ro of 4.0%is the maturity threshold of organic pore extinction,the shale layers with Ro larger than 3.5%have high risk for shale gas exploration,these shale layers have low gas contents,as they were in an open state before uplift,and had high hydrocarbon expulsion efficiency and strong aromatization,thus having the"congenital deficiency"of high maturity and pore densification.(4)The pores in the same organic matter particle have good connectivity;and the effective connectivity between different organic matter pores and inorganic pores and fractures depends on the abundance and distribution of organic matter,and development degree of pores and fractures in the shale;the accumulation,preservation and laminar distribution of different types of organic matter in high abundance is the prerequisite for the development and connection of organic pores,grain margin fractures and bedding fractures in reservoir.展开更多
Due to complex geological structures and a narrow safe mud density window,offshore fractured formations frequently encounter severe lost circulation(LC)during drilling,significantly hindering oil and gas exploration a...Due to complex geological structures and a narrow safe mud density window,offshore fractured formations frequently encounter severe lost circulation(LC)during drilling,significantly hindering oil and gas exploration and development.Predicting LC risks enables the targeted implementation of mitigation strategies,thereby reducing the frequency of such incidents.To address the limitations of existing 3D geomechanical modeling in predicting LC,such as arbitrary factor selection,subjective weight assignment,and the inability to achieve pre-drilling prediction along the entire well section,an improved prediction method is proposed.This method integrates multi-source data and incorporates three LC-related sensitivity factors:fracture characteristics,rock brittleness,and in-situ stress conditions.A quantitative risk assessment model for LC is developed by combining the subjective analytic hierarchy process with the objective entropy weight method(EWM)to assign weights.Subsequently,3D geomechanical modeling is applied to identify regional risk zones,enabling digital visualization for pre-drilling risk prediction.The developed 3D LC risk prediction model was validated using actual LC incidents from drilled wells.Results were generally consistent with field-identified LC zones,with an average relative error of 19.08%,confirming its reliability.This method provides practical guidance for mitigating potential LC risks and optimizing drilling program designs in fractured formations.展开更多
Common base and noble metals represent an important economic factor in the actual industrial development.For instance the world resources for copper are actually estimated for about the next 30 years only.The situatio...Common base and noble metals represent an important economic factor in the actual industrial development.For instance the world resources for copper are actually estimated for about the next 30 years only.The situation requires rethinking the way major ore deposits form,leading to new guides for exploration.The present paper briefly examines the processes leading to ore formation,in relation with granitic or granodioritic intrusions.It identifies the importance of metal enrichment during the magmatic stage.Within the magma chamber that forms porphyry intrusions,metals may incorporate to first formed crystals,becoming inert;concentrate into the residual melt of a mush;or segregate by diffusion into the exsolved magmatic volatile phase(MVP)into which they are transported and precipitated.A competition results between elements partitioning and diffusivity.Hence,a specific Peclet number for each metal(Cu,Au,Ag,Mo,W,Sn,and REE)controls the ratio between the diffusive and the advective flux.Metals diffusivity in the melt shows differential behavior relative to a threshold of about10 13 m2/s.Metals with slower diffusivity values(e.g.As)will not concentrate.Conversely,fast diffusive metals(Au,Ag,Cu)may rapidly incorporate the MVP,provided an adequate component(halogens or S)is attractive for metals.The chemistry of the MVP escaping the magma induces different alteration patterns.Their relative content in F,Cl or S,attested by the composition of biotites and apatites,links with the preferential content of metals in o re deposits,representing a valuable tool for exploration.Finally the model is replaced in a set of coupled mechanical-chemical instabilities,within a three phase material.展开更多
In order to design a kind of heat exchanger suitable to the indirect-touched gas hydrate cool storage vessel, a visual observation of HCFC141b gas hydrate formation/decomposition process was presented through a self-d...In order to design a kind of heat exchanger suitable to the indirect-touched gas hydrate cool storage vessel, a visual observation of HCFC141b gas hydrate formation/decomposition process was presented through a self-designed small-scale visualization apparatus of gas hydrate cool storage. Based on the shooted photos and recorded temperatures, the formation/decomposition process of HCFC141b are described, some characteristics are concluded, and some suggestions of designing heat exchanger are indicated according to the specific characteristics of HCFC141b gas hydrate formation/decomposition process.展开更多
Gas hydrates have endowed with great potential in gas storage,and rapid formation of gas hydrates is critical to use this novel technology.This work evaluated the natural gas hydrate formation process,which was compar...Gas hydrates have endowed with great potential in gas storage,and rapid formation of gas hydrates is critical to use this novel technology.This work evaluated the natural gas hydrate formation process,which was compared from six parameters,including conversion of water to hydrate,storage capacity,the rate of hydrate formation,space velocity(SV)of hydrate reaction,energy consumption and hydrate removal.The literature was selected by analyzing and comparing these six parameters mentioned above,meanwhile placing emphasis on the three parameters of storage capacity,the rate of hydrate formation and space velocity of hydrate reaction.Through analysis and comparison,four conclusions could be obtained as follows.Firstly,the overall performance of the stirring process and the spraying process were better than other processes after analyzing the six parameters.Secondly,the additive types,the reactor structure and the reactor size had influence on the natural gas hydrate formation process.Thirdly,the energy consumption via reciprocating impact in the hydrate formation process was higher than that via stirring,spraying and static higee.Finally,it was one key for hydrate removal to realize the hydrate industrial production.展开更多
The Bipindi iron ore district is located in the central section of the Nyong Complex at the northwestern margin of the Congo Craton in Southwest Cameroon.This iron district contains numerous iron mineralization hosted...The Bipindi iron ore district is located in the central section of the Nyong Complex at the northwestern margin of the Congo Craton in Southwest Cameroon.This iron district contains numerous iron mineralization hosted by the Mewongo,Bibole,Kouambo,and Zambi banded iron formations(BIFs).These BIFs contain magnetite as the main iron ore mineral associated with pyrite,and gangue minerals are quartz with minor chlorite and amphibole.The origin of iron ore from these BIFs was investigated using a combination of in-situ magnetite and whole-rock chemistry.The studied BIF ore samples have a narrow range of TFe between 30.90 wt.%and 43.20 wt.%,indicating a low-grade ore.The geochemical signatures of magnetite such as low contents of base metals(e.g.,Cu,Co,V,and Zn)and low Co/Zn ratios<0.85 indicate a hydrothermal origin.Combined with the geochemical features of these BIFs,e.g.,high Fe/Ti and Fe/Al ratios(mean>600 and>75,respectively),we suggest that magnetite was derived from a mixture of seawater and~0.1%low-temperature hydrothermal fluids in an oxidizing environment.Collectively,low-temperature hydrothermal and later metamorphic fluids were necessary for the transformation of the protolith Nyong Complex BIFs to iron ore.展开更多
The skarn and ore bodies of the stratabound skarn copper deposits of Tongling, Anhui Province, are both controlled by definite stratigraphic horizons, and they are concordant with the strata. They occur as layers and ...The skarn and ore bodies of the stratabound skarn copper deposits of Tongling, Anhui Province, are both controlled by definite stratigraphic horizons, and they are concordant with the strata. They occur as layers and layer-like bodies in permeable carbonate rocks of the Middle-Upper Carboniferous Huanglong and Chuanshan Formations which are underlain by impermeable shale or siliceous rocks of the Upper Devonian Wutong Formation. The authors study the dynamics of ore-forming processes of the ore deposits with the dynamic model of coupled transport and reaction, and the following results are obtained: The salinity gradient and flow rate of the ore-forming fluids can both promote the mixing and reaction of juvenile water and formation water, and the permeable strata are favourable sites for the intense transport-reaction of mixing and the formation of deposits. (2) As isothermal transport-reaction took place along the bedding of strata, the moving transport-reaction front formed at the contact between the ore-forming fluids and the rocks advanced slowly along the permeable strata, and then stratiform skarn and ore bodies concordant with the strata were formed. (3) The gradient transport-reaction taking place across the isotherms in the cross-bedding direction caused the mineralogical composition to alter gradually from magnesian skarn to sulphide ore bodies.展开更多
Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality res...Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality reservoirs of deep and ultra-deep clastic rocks were investigated using thin section,scanning electron microscope,electron probe,stable isotopic composition and fluid inclusion data.The Qingshuihe Formation went through four burial stages of slow shallow burial,tectonic uplift,progressive deep burial and rapid deep burial successively.The stages of slow shallow burial and tectonic uplift not only can alleviate the mechanical compaction of grains,but also can maintain an open diagenetic system in the reservoirs for a long time,which promotes the dissolution of soluble components by meteoric freshwater and inhibits the precipitation of dissolution products in the reservoirs.The late rapid deep burial process contributed to the development of fluid overpressure,which effectively inhibits the destruction of primary pores by compaction and cementation.The fluid overpressure promotes the development of microfractures in the reservoir,which enhances the dissolution effect of organic acids.Based on the quantitative reconstruction of porosity evolution history,it is found that the long-term slow shallow burial and tectonic uplift processes make the greatest contribution to the development of deep-ultra-deep high-quality clastic rock reservoirs,followed by the late rapid deep burial process,and the progressive deep burial process has little contribution.展开更多
To investigate and analyze the thermo-hydro-mechanical(THM) coupling phenomena of a surrounding rock mass in an argillaceous formation, a nuclear waste disposal concept in drifts was represented physically in an in-si...To investigate and analyze the thermo-hydro-mechanical(THM) coupling phenomena of a surrounding rock mass in an argillaceous formation, a nuclear waste disposal concept in drifts was represented physically in an in-situ test way. A transversely isotropic model was employed to reproduce the whole test process numerically. Parameters of the rock mass were determined by laboratory and in-situ experiments. Based on the numerical simulation results and in-situ test data, the variation processes of pore water pressure, temperature and deformation of surrounding rock were analyzed. Both the measured data and numerical results reveal that the thermal perturbation is the principal driving force which leads to the variation of pore water pressure and deformations in the surrounding rock. The temperature, pore pressure and deformation of rock mass change rapidly at each initial heating stage with a constant heating power. The temperature field near the heater borehole is relatively steady in the subsequent stages of the heating phase. However, the pore pressure and deformation fields decrease gradually with temperature remaining unchanged condition. It also shows that a transversely isotropic model can reproduce the THM coupling effects generating in the near-field of a nuclear waste repository in an argillaceous formation.展开更多
基金supported by the CAS Knowledge Innovation Key Project (Grant No.KZCX2-YW-330)the National Science Fund Fostering Talents in Basic Research to Glaciology and Geocryology (Grant No.J0630966)
文摘In order to study water transfer characteristics inside non-saturated media during methane hydrate formation and dissociation processes,water changes on the top,middle and bottom locations of experimental media during the reaction processes were continuously followed with a novel apparatus with three pF-meter sensors.Coarse sand,fine sand and loess were chosen as experimental media.It was experimentally observed that methane hydrate was easier formed inside coarse sand and fine sand than inside loess.Methane hydrate formation configuration and water transfer characteristics during methane hydrate formation processes were very different among the different non-saturated media,which were important for understanding methane hydrate formation and dissociation mechanism inside sediments in nature.
基金the National Natural Science Foundation of China(No.21836002)the Young Innovative Talents Project in Higher Education of Guangdong(No.2018KQNCX002)+3 种基金Guangdong Innovative and Entrepreneurial Research Team Program(No.2016ZT06N569)the Fundamental Research Funds for the Central Universities(No.D2192000)the Shaoguan Special Fund for Soil Pollution Prevention and Control(No.2017sgtyfz103)the Youth Talent Promotion Project of Guangzhou Science and Technology Association(No.X20200301029)。
文摘The effective extracting Cr(Ⅵ) from chromite ore processing residue(COPR) is the key to achieve COPR detoxification and recovery.We developed an effective method to extract Cr(Ⅵ) from COPR via controlling the phase transformation of Cr(Ⅵ)-containing minerals.Characteristic analysis showed that Cr(Ⅵ) was mainly incorporated in the hydrocalumite(NaCa4Al2O6(SO4/CrO4)1.5-15H2O) in COPR,which was a layered-double hydroxide(LDH) with multilayer structure.In the hydrothermal treatment experiments,the Na2CO3 solution showed significant extraction effect of Cr(Ⅵ) and detoxification effect of COPR.After treatment,95% of Cr(Ⅵ) was removed and the Cr(Ⅵ) concentration in the leachate was decreased to 1.6 mg/L by the toxicity characteristic leaching procedure(TCLP),within the regulatory limit disposal standard(HJ/T 301-2007,3 mg/L).Further study revealed that,during the treatment,hydrocalumite transformed into calcite(CaCO3) under the effect of mineralizer,therefore,the layered structure collapsed and the incorporated Cr(Ⅵ) was released to the supernatant.Meanwhile,the Cr(Ⅵ)desorbed from calcite with the calcite particles grew into large size with smooth surface.Stir-flow experiment revealed that the amount of chromium released from CORP to the environment was significantly reduced after treatment,and it is safer for landfill disposal.This work will provide an instructive guidance for the detoxification and recovery of COPR.
基金financed and supported by the German research institute "Gesellschaft für Anlagen-und Reaktorsicherheit (GRS) mbH"
文摘The main objective of this paper is to investigate and analyse the thermo-hydro-mechanical（THM） coupling phenomena and their influences on the repository safety.In this paper,the high-level waste（HLW） disposal concept in drifts in clay formation with backfilled bentonite buffer is represented numerically using the CODE BRIGHT developed by the Technical University of Catalonia in Barcelona.The parameters of clay and bentonite used in the simulation are determined by laboratory and in situ experiments.The calculation results are presented to show the hydro-mechanical（HM） processes during the operation phase and the THM processes in the after-closure phase.According to the simulation results,the most probable critical processes for the disposal project have been represented and analyzed.The work also provides an input for additional development regarding the design,assessment and validation of the HLW disposal concept.
文摘The aim of this work is mathematical education through the knowledge system and mathematical modeling. A net model of formation of mathematical knowledge as a deductive theory is suggested here. Within this model the formation of deductive theory is represented as the development of a certain informational space, the elements of which are structured in the form of the orientated semantic net. This net is properly metrized and characterized by a certain system of coverings. It allows injecting net optimization parameters, regulating qualitative aspects of knowledge system under consideration. To regulate the creative processes of the formation and realization of mathematical know- edge, stochastic model of formation deductive theory is suggested here in the form of branching Markovian process, which is realized in the corresponding informational space as a semantic net. According to this stochastic model we can get correct foundation of criterion of optimization creative processes that leads to “great main points” strategy (GMP-strategy) in the process of realization of the effective control in the research work in the sphere of mathematics and its applications.
文摘The prevailing idea so far about why the rainfall occurs was that after agglutination of water droplets with condensation nuclei, the size of the particle formed by the condensation nuclei connected with droplets of water increased considerably and caused its fall. This idea has led to numerous scientific publications in which empirical distribution functions of clouds’ water droplets sizes were proposed. Estimates values provided by these empirical distribution functions, in most cases, were validated by comparison with UHF Radar measurements. The condensation nuclei concept has not been sufficiently exploited and this has led meteorologists to error, in their attempt to describe the clouds, thinking that clouds were formed by liquid water droplets. Indeed, MBANE BIOUELE paradox (2005) confirms this embarrassing situation. In fact, when applying Archimedes theorem to a liquid water droplet suspended in the atmosphere, we obtain a meaningless inequality ?which makes believe that the densities of pure water in liquid and solid phases are much lower than that of the atmosphere considered at the sea level. This meaningless inequality is easy to contradict: of course, if you empty a bottle of pure liquid water in the ocean (where z is equal to 0), this water will not remain suspended in the air, i.e., application of Archimedes’ theorem allows realizing that there is no liquid (or solid) water droplet, suspended in the clouds. Indeed, all liquid (or solid) water droplets which are formed in clouds, fall under the effect of gravity and produce rains. This means that our current description of the clouds is totally wrong. In this study, we describe the clouds as a gas composed of dry air and saturated water vapor whose optical properties depend on temperature, i.e., when the temperature of a cloud decreases, the color of this gaseous system tends towards white.
基金financially supported by the National Key R&D Program of China(grant no.2017YFC0602405)the National Natural Science Foundation of China(grant no.42030811)。
文摘Rare metals including Lithium(Li),Beryllium(Be),Rubidium(Rb),Cesium(Cs),Zirconium(Zr),Hafnium(Hf),Niobium(Nb),Tantalum(Ta),Tungsten(W)and Tin(Sn)are important critical mineral resources.In China,rare metal mineral deposits are spatially distributed mainly in the Altay and Southern Great Xingán Range regions in the Central Asian orogenic belt;in the Middle Qilian,South Qinling and East Qinling mountains regions in the Qilian-Qinling-Dabie orogenic belt;in the Western Sichuan and Bailongshan-Dahongliutan regions in the Kunlun-Songpan-Garze orogenic belt,and in the Northeastern Jiangxi,Northwestern Jiangxi,and Southern Hunan regions in South China.Major ore-forming epochs include Indosinian(mostly 200-240 Ma,in particular in western China)and the Yanshanian(mostly 120-160 Ma,in particular in South China).In addition,Bayan Obo,Inner Mongolia,northeastern China,with a complex formation history,hosts the largest REE and Nb deposits in China.There are six major rare metal mineral deposit types in China:Highly fractionated granite;Pegmatite;Alkaline granite;Carbonatite and alkaline rock;Volcanic;and Hydrothermal types.Two further types,namely the Leptynite type and Breccia pipe type,have recently been discovered in China,and are represented by the Yushishan Nb-Ta-(Zr-Hf-REE)and the Weilasituo Li-Rb-Sn-W-Zn-Pb deposits.Several most important controlling factors for rare metal mineral deposits are discussed,including geochemical behaviors and sources of the rare metals,highly evolved magmatic fractionation,and structural controls such as the metamorphic core complex setting,with a revised conceptual model for the latter.
基金financially supported by the Special Research Program for Public-welfare Forestry(No.201204301-2)National Nonprofit Institute Research Grant of RITF(No.RITFKYYW2010-05)
文摘We studied the formation of heartwood in Ery- throphleumfordii Oliv., an endangered rosewood species, by cross-section analysis on 52 stumps aged 28-57 years and arbitrarily sampled from natural forests in South China. Width and area of heartwood were positively correlated with age and xylem width （XW）, and were independent of annual radial growth. The proportions of heartwood and sapwood areas were equal at about 40 years. The heartwood formation pro- cess was simulated by linear regression of age and XW.
文摘The influence of iron ore characteristics on FeO formation during sintering was examined mainly in terms of chemical composition and the melting characteristics of iron ores. Statistical regression and X-ray diffraction were used to further explain the specific effect of iron ore characteristics on FeO formation. The results indicate that LOI （loss on ignition） in iron ores have a positive influence on FeO formation by promoting the sintering process of Fe2O3 decomposing and reducing. Silica contents in iron ores play a determining role in final content of FeO in sinter. The melting characteristics of iron ores significantly affect FeO formation during sintering.
文摘The feasibility was investigated to substitute chrome-free passivation treatment of electrodeposited zinc in a titanium bath for chromate passivation treatment. The formation mechanism of the chrome-free passivation film was further analyzed. The surface mor- phologies and the elemental compositions of the treated samples with varied immersion times were observed by scanning electron mi- croscopy （SEM） and determined by energy dispersion spectrometry （EDS）, respectively. The electrode potential of the sample surface was recorded in the film formation process. The changes of the electrode potential are in accordance with that of SEM and EDS of the sample surface. The results of X-ray photoelectron spectroscopy （XPS） show the chrome-free passivation film composed ofZnO, SiO2, TiO2, Zn4Si207（OH）2, and SrF2. The anode zinc dissolution and the local pH value increase due to the cathode hydrogen ion reduction process result in the formation of the chrome-free passivation film. The macro-images of the chrome-free passivation films formed on electrodeposited zinc show that the color of the film changes from blue to iridescence with the increase of the immersion times.
文摘Dioxins, which are of the most toxic materials on the earth, are principal emitted from waste incineration process. The molecular structures, toxicity parameters, such as toxicity equivalency factor, tolerable daily intake and physic-chemical properties of dioxins are briefly summarized. Three formation mechanisms of dioxins in waste incineration process, namely as de novo synthesis, mechanisms involving small organic molecular as precursors and homogenous gas phase reaction mechanism are alto reviewed. The influencing factors for dioxins formation during waste incineration process are also discussed. Three major methods for reducing dioxins emission from waste incineration process are discussed based upon the formation mechanisms and influencing factors. A new waste incineration process with low dioxins emission and low hydrogen chloride corrosion has been proposed based on multi- stage unit operation principal according to formation mechanisms of dioxins and potential production location in waste incinerators.
基金the financial support received from the Key Program of National Natural Science Foundation of China(No.52130406)the National Key R&D Program of China(Nos.2021YFC2901000 and 2022YFC2905800)+1 种基金the General Program of National Natural Science Foundation of China(No.52274253)Natural Science Foundation Innovation Group Project of Hubei Province,China(No.2023AFA044)。
文摘Hydrogen-based mineral phase transformation(HMPT)technology has demonstrated its effectiveness in separating iron and enriching rare earths from Bayan Obo refractory ores.However,further research is needed to clarify the phase composition and floatability of rare earths obtained after HMPT owing to the associated phase transformations.This study explored the mineralogical characteristics and separation behavior of rare earths in HMPT-treated iron tailings.Process mineralogy studies conducted via BGRIMM process mineralogy analysis and X-ray diffraction revealed that the main valuable minerals in the tailings included rare-earth oxides(9.15wt%),monazite(5.31wt%),and fluorite(23.52wt%).The study also examined the impact of mineral liberation and gangue mineral intergrowth on flotation performance.Flotation tests achieved a rare-earth oxide(REO)grade of 74.12wt% with a recovery of 34.17% in open-circuit flotation,whereas closed-circuit flotation resulted in a REO grade of 60.27wt% with a recovery of 73%.Transmission electron microscopy and scanning electron microscopy coupled with energy-dispersive spectroscopy revealed that monazite remained stable during the HMPT process,while bastnaesite was transformed into Ce_(7)O_(12)and CeF_(3),leading to increased collector consumption.Nonetheless,the HMPT process did not significantly affect the flotation performance of rare earths.The enrichment of fluorite in the tailings highlighted its further recovery potential.The integration of HMPT with magnetic separation and flotation presents an efficient strategy for recovering rare earths,iron,and fluorite from Bayan Obo ores.
基金Supported by the National Natural Science Foundation of China(41690133)National Oil and Gas Science and Technology Major Project(2017ZX05036-002)。
文摘In view of strong heterogeneity and complex formation and evolution of organic pores,field emission scanning electron microscopy(FESEM),Raman spectrum and fluid injection+CT/SEM imaging technology were used to study the macerals,organic pores and connectivity of organic pores in the lower Paleozoic organic-rich shale samples from Southern China.Combined with the mechanism of hydrocarbon generation and expulsion and pore forming mechanism of organic matter-based activated carbon,the relationships between organic pore development and the organic matter type,hydrocarbon generation process,diagenesis and pore pressure were explored to reveal the controlling factors of the formation,preservation and connectivity of organic pores in shale.(1)The generation of organic pores goes on through the whole hydrocarbon generation process,and is controlled by the type,maturity and decomposition of organic matter;the different hydrocarbon generation components and differential hydrocarbon-generation evolution of kerogen and solid asphalt lead to different pore development characteristics;organic pores mainly develop in solid bitumen and hydrogen-rich kerogen.(2)The preservation of organic pores is controlled by maturity and diagenesis,including the steric hindrance effect of in-situ hydrocarbon retention,rigid mineral framework formed by recrystallization,the coupling mechanism of pore-fluid pressure and shale brittleness-ductility transition.(3)The Ro of 4.0%is the maturity threshold of organic pore extinction,the shale layers with Ro larger than 3.5%have high risk for shale gas exploration,these shale layers have low gas contents,as they were in an open state before uplift,and had high hydrocarbon expulsion efficiency and strong aromatization,thus having the"congenital deficiency"of high maturity and pore densification.(4)The pores in the same organic matter particle have good connectivity;and the effective connectivity between different organic matter pores and inorganic pores and fractures depends on the abundance and distribution of organic matter,and development degree of pores and fractures in the shale;the accumulation,preservation and laminar distribution of different types of organic matter in high abundance is the prerequisite for the development and connection of organic pores,grain margin fractures and bedding fractures in reservoir.
基金supported by the National Natural Science Foundation of China(No.52074312)the CNPC Science and Technology Innovation Foundation(No.2021DQ02-0505)+1 种基金the Open Fund Project of the National Key Laboratory for the Enrichment Mechanism and Efficient Development of Shale Oil and Gas(No.36650000-24-ZC0609-0006)the Major Science and Technology Project of Karamay City(No.20232023zdzx0003).
文摘Due to complex geological structures and a narrow safe mud density window,offshore fractured formations frequently encounter severe lost circulation(LC)during drilling,significantly hindering oil and gas exploration and development.Predicting LC risks enables the targeted implementation of mitigation strategies,thereby reducing the frequency of such incidents.To address the limitations of existing 3D geomechanical modeling in predicting LC,such as arbitrary factor selection,subjective weight assignment,and the inability to achieve pre-drilling prediction along the entire well section,an improved prediction method is proposed.This method integrates multi-source data and incorporates three LC-related sensitivity factors:fracture characteristics,rock brittleness,and in-situ stress conditions.A quantitative risk assessment model for LC is developed by combining the subjective analytic hierarchy process with the objective entropy weight method(EWM)to assign weights.Subsequently,3D geomechanical modeling is applied to identify regional risk zones,enabling digital visualization for pre-drilling risk prediction.The developed 3D LC risk prediction model was validated using actual LC incidents from drilled wells.Results were generally consistent with field-identified LC zones,with an average relative error of 19.08%,confirming its reliability.This method provides practical guidance for mitigating potential LC risks and optimizing drilling program designs in fractured formations.
基金financial support from CREGU,Nancy.A6 months stay at the AIST Tsukuba,Japan,with Sunsho Ishihara was the introduction to link granites and ores
文摘Common base and noble metals represent an important economic factor in the actual industrial development.For instance the world resources for copper are actually estimated for about the next 30 years only.The situation requires rethinking the way major ore deposits form,leading to new guides for exploration.The present paper briefly examines the processes leading to ore formation,in relation with granitic or granodioritic intrusions.It identifies the importance of metal enrichment during the magmatic stage.Within the magma chamber that forms porphyry intrusions,metals may incorporate to first formed crystals,becoming inert;concentrate into the residual melt of a mush;or segregate by diffusion into the exsolved magmatic volatile phase(MVP)into which they are transported and precipitated.A competition results between elements partitioning and diffusivity.Hence,a specific Peclet number for each metal(Cu,Au,Ag,Mo,W,Sn,and REE)controls the ratio between the diffusive and the advective flux.Metals diffusivity in the melt shows differential behavior relative to a threshold of about10 13 m2/s.Metals with slower diffusivity values(e.g.As)will not concentrate.Conversely,fast diffusive metals(Au,Ag,Cu)may rapidly incorporate the MVP,provided an adequate component(halogens or S)is attractive for metals.The chemistry of the MVP escaping the magma induces different alteration patterns.Their relative content in F,Cl or S,attested by the composition of biotites and apatites,links with the preferential content of metals in o re deposits,representing a valuable tool for exploration.Finally the model is replaced in a set of coupled mechanical-chemical instabilities,within a three phase material.
基金supported by the National Natural Science Foundation of China (No. 50176051, No. 59836230)the Satate Key Development Program for Basic Research of China (No. 2000026306).
文摘In order to design a kind of heat exchanger suitable to the indirect-touched gas hydrate cool storage vessel, a visual observation of HCFC141b gas hydrate formation/decomposition process was presented through a self-designed small-scale visualization apparatus of gas hydrate cool storage. Based on the shooted photos and recorded temperatures, the formation/decomposition process of HCFC141b are described, some characteristics are concluded, and some suggestions of designing heat exchanger are indicated according to the specific characteristics of HCFC141b gas hydrate formation/decomposition process.
基金supported by the Scientific and Technological Research Project of the Science and Technology Department of Henan Province,China(152102210041)the National Natural Science Foundation of China(NSFC-U1404519)+1 种基金the China Postdoctoral Science Foundation(2016 M602260)the Program of Biomass Resources Processing and Efficient Utilization of Outstanding Foreign Scientists’Workroom(GZS2018004)。
文摘Gas hydrates have endowed with great potential in gas storage,and rapid formation of gas hydrates is critical to use this novel technology.This work evaluated the natural gas hydrate formation process,which was compared from six parameters,including conversion of water to hydrate,storage capacity,the rate of hydrate formation,space velocity(SV)of hydrate reaction,energy consumption and hydrate removal.The literature was selected by analyzing and comparing these six parameters mentioned above,meanwhile placing emphasis on the three parameters of storage capacity,the rate of hydrate formation and space velocity of hydrate reaction.Through analysis and comparison,four conclusions could be obtained as follows.Firstly,the overall performance of the stirring process and the spraying process were better than other processes after analyzing the six parameters.Secondly,the additive types,the reactor structure and the reactor size had influence on the natural gas hydrate formation process.Thirdly,the energy consumption via reciprocating impact in the hydrate formation process was higher than that via stirring,spraying and static higee.Finally,it was one key for hydrate removal to realize the hydrate industrial production.
基金supported by the Central South University Postdoctoral Research Fund(No.22020084)。
文摘The Bipindi iron ore district is located in the central section of the Nyong Complex at the northwestern margin of the Congo Craton in Southwest Cameroon.This iron district contains numerous iron mineralization hosted by the Mewongo,Bibole,Kouambo,and Zambi banded iron formations(BIFs).These BIFs contain magnetite as the main iron ore mineral associated with pyrite,and gangue minerals are quartz with minor chlorite and amphibole.The origin of iron ore from these BIFs was investigated using a combination of in-situ magnetite and whole-rock chemistry.The studied BIF ore samples have a narrow range of TFe between 30.90 wt.%and 43.20 wt.%,indicating a low-grade ore.The geochemical signatures of magnetite such as low contents of base metals(e.g.,Cu,Co,V,and Zn)and low Co/Zn ratios<0.85 indicate a hydrothermal origin.Combined with the geochemical features of these BIFs,e.g.,high Fe/Ti and Fe/Al ratios(mean>600 and>75,respectively),we suggest that magnetite was derived from a mixture of seawater and~0.1%low-temperature hydrothermal fluids in an oxidizing environment.Collectively,low-temperature hydrothermal and later metamorphic fluids were necessary for the transformation of the protolith Nyong Complex BIFs to iron ore.
基金MGMR Eighth Five- Year Plan Basic Geology Research Foundation Grant 8502216China National Natural Science Foundation Grant 49173169
文摘The skarn and ore bodies of the stratabound skarn copper deposits of Tongling, Anhui Province, are both controlled by definite stratigraphic horizons, and they are concordant with the strata. They occur as layers and layer-like bodies in permeable carbonate rocks of the Middle-Upper Carboniferous Huanglong and Chuanshan Formations which are underlain by impermeable shale or siliceous rocks of the Upper Devonian Wutong Formation. The authors study the dynamics of ore-forming processes of the ore deposits with the dynamic model of coupled transport and reaction, and the following results are obtained: The salinity gradient and flow rate of the ore-forming fluids can both promote the mixing and reaction of juvenile water and formation water, and the permeable strata are favourable sites for the intense transport-reaction of mixing and the formation of deposits. (2) As isothermal transport-reaction took place along the bedding of strata, the moving transport-reaction front formed at the contact between the ore-forming fluids and the rocks advanced slowly along the permeable strata, and then stratiform skarn and ore bodies concordant with the strata were formed. (3) The gradient transport-reaction taking place across the isotherms in the cross-bedding direction caused the mineralogical composition to alter gradually from magnesian skarn to sulphide ore bodies.
基金Supported by the National Natural Science Foundation of China(41872113,42172109,42172108)CNPC-China University of Petroleum(Beijing)Strategic Cooperation Project(ZLZX2020-02)+1 种基金National Key R&D Program Project(2018YFA0702405)China University of Petroleum(Beijing)Research Project(2462020BJRC002,2462020YXZZ020)。
文摘Taking the Lower Cretaceous Qingshuihe Formation in the southern margin of Junggar Basin as an example,the influences of the burial process in a foreland basin on the diagenesis and the development of high-quality reservoirs of deep and ultra-deep clastic rocks were investigated using thin section,scanning electron microscope,electron probe,stable isotopic composition and fluid inclusion data.The Qingshuihe Formation went through four burial stages of slow shallow burial,tectonic uplift,progressive deep burial and rapid deep burial successively.The stages of slow shallow burial and tectonic uplift not only can alleviate the mechanical compaction of grains,but also can maintain an open diagenetic system in the reservoirs for a long time,which promotes the dissolution of soluble components by meteoric freshwater and inhibits the precipitation of dissolution products in the reservoirs.The late rapid deep burial process contributed to the development of fluid overpressure,which effectively inhibits the destruction of primary pores by compaction and cementation.The fluid overpressure promotes the development of microfractures in the reservoir,which enhances the dissolution effect of organic acids.Based on the quantitative reconstruction of porosity evolution history,it is found that the long-term slow shallow burial and tectonic uplift processes make the greatest contribution to the development of deep-ultra-deep high-quality clastic rock reservoirs,followed by the late rapid deep burial process,and the progressive deep burial process has little contribution.
基金Project(41272287)supported by the National Natural Science Foundation of China
文摘To investigate and analyze the thermo-hydro-mechanical(THM) coupling phenomena of a surrounding rock mass in an argillaceous formation, a nuclear waste disposal concept in drifts was represented physically in an in-situ test way. A transversely isotropic model was employed to reproduce the whole test process numerically. Parameters of the rock mass were determined by laboratory and in-situ experiments. Based on the numerical simulation results and in-situ test data, the variation processes of pore water pressure, temperature and deformation of surrounding rock were analyzed. Both the measured data and numerical results reveal that the thermal perturbation is the principal driving force which leads to the variation of pore water pressure and deformations in the surrounding rock. The temperature, pore pressure and deformation of rock mass change rapidly at each initial heating stage with a constant heating power. The temperature field near the heater borehole is relatively steady in the subsequent stages of the heating phase. However, the pore pressure and deformation fields decrease gradually with temperature remaining unchanged condition. It also shows that a transversely isotropic model can reproduce the THM coupling effects generating in the near-field of a nuclear waste repository in an argillaceous formation.
