Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is m...The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is mainly used for finite element analysis at present,and the effectiveness of the surrogate material model has been fully confirmed.However,there are some accuracy problems when dealing with boundary elements using the surrogate material model,which will affect the topology optimization results.In this study,a boundary element reconstruction(BER)model is proposed based on the surrogate material model under the MMC topology optimization framework to improve the accuracy of topology optimization.The proposed BER model can reconstruct the boundary elements by refining the local meshes and obtaining new nodes in boundary elements.Then the density of boundary elements is recalculated using the new node information,which is more accurate than the original model.Based on the new density of boundary elements,the material properties and volume information of the boundary elements are updated.Compared with other finite element analysis methods,the BER model is simple and feasible and can improve computational accuracy.Finally,the effectiveness and superiority of the proposed method are verified by comparing it with the optimization results of the original surrogate material model through several numerical examples.展开更多
Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
Early and accurate detection of bone cancer and marrow cell abnormalities is critical for timely intervention and improved patient outcomes.This paper proposes a novel hybrid deep learning framework that integrates a ...Early and accurate detection of bone cancer and marrow cell abnormalities is critical for timely intervention and improved patient outcomes.This paper proposes a novel hybrid deep learning framework that integrates a Convolutional Neural Network(CNN)with a Bidirectional Long Short-Term Memory(BiLSTM)architecture,optimized using the Firefly Optimization algorithm(FO).The proposed CNN-BiLSTM-FO model is tailored for structured biomedical data,capturing both local patterns and sequential dependencies in diagnostic features,while the Firefly Algorithm fine-tunes key hyperparameters to maximize predictive performance.The approach is evaluated on two benchmark biomedical datasets:one comprising diagnostic data for bone cancer detection and another for identifying marrow cell abnormalities.Experimental results demonstrate that the proposed method outperforms standard deep learning models,including CNN,LSTM,BiLSTM,and CNN-LSTM hybrids,significantly.The CNNBiLSTM-FO model achieves an accuracy of 98.55%for bone cancer detection and 96.04%for marrow abnormality classification.The paper also presents a detailed complexity analysis of the proposed algorithm and compares its performance across multiple evaluation metrics such as precision,recall,F1-score,and AUC.The results confirm the effectiveness of the firefly-based optimization strategy in improving classification accuracy and model robustness.This work introduces a scalable and accurate diagnostic solution that holds strong potential for integration into intelligent clinical decision-support systems.展开更多
Large biases exist in real-time ENSO prediction, which can be attributed to uncertainties in initial conditions and model parameters. Previously, a 4D variational （4D-Vat） data assimilation system was developed for ...Large biases exist in real-time ENSO prediction, which can be attributed to uncertainties in initial conditions and model parameters. Previously, a 4D variational （4D-Vat） data assimilation system was developed for an intermediate coupled model （ICM） and used to improve ENSO modeling through optimized initial conditions. In this paper, this system is further applied to optimize model parameters. In the ICM used, one important process for ENSO is related to the anomalous temperature of subsurface water entrained into the mixed layer （Te）, which is empirically and explicitly related to sea level （SL） variation. The strength of the thermocline effect on SST （referred to simply as ＂the thermocline effect＂） is represented by an introduced parameter, （l＇Te. A numerical procedure is developed to optimize this model parameter through the 4D-Var assimilation of SST data in a twin experiment context with an idealized setting. Experiments having their initial condition optimized only, and having their initial condition plus this additional model parameter optimized, are compared. It is shown that ENSO evolution can be more effectively recovered by including the additional optimization of this parameter in ENSO modeling. The demonstrated feasibility of optimizing model parameters and initial conditions together through the 4D-Var method provides a modeling platform for ENSO studies. Further applications of the 4D-Vat data assimilation system implemented in the ICM are also discussed.展开更多
A support vector machine with guadratic polynomial kernel function based nonlinear model multi-step-ahead optimizing predictive controller was presented. A support vector machine based predictive model was established...A support vector machine with guadratic polynomial kernel function based nonlinear model multi-step-ahead optimizing predictive controller was presented. A support vector machine based predictive model was established by black-box identification. And a quadratic objective function with receding horizon was selected to obtain the controller output. By solving a nonlinear optimization problem with equality constraint of model output and boundary constraint of controller output using Nelder-Mead simplex direct search method, a sub-optimal control law was achieved in feature space. The effect of the controller was demonstrated on a recognized benchmark problem and a continuous-stirred tank reactor. The simulation results show that the multi-step-ahead predictive controller can be well applied to nonlinear system, with better performance in following reference trajectory and disturbance-rejection.展开更多
In this paper, a method of optimizing the number of hidden layer neurons has been put forward. This optimizing method is suitable for three layers B-p network. The purpose of this optimizing method is to reduce the pr...In this paper, a method of optimizing the number of hidden layer neurons has been put forward. This optimizing method is suitable for three layers B-p network. The purpose of this optimizing method is to reduce the predicting errors when the model is used as predicting model. As an example of application, a predicting model of steel end-quench curves has been designed by using this optimizing method. The result shows that the optimization of ANN hidden layer architecture has an effect on reducing predicting errors.展开更多
By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture t...By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.展开更多
Based on experimental data, a nonlinear model about tensile strength and technical parameters such as Mn and St content, finishing rolling speed and finishing rolling temperature for deformed steel bars in the process...Based on experimental data, a nonlinear model about tensile strength and technical parameters such as Mn and St content, finishing rolling speed and finishing rolling temperature for deformed steel bars in the process of hot rolling was established by using artificial neural networks. The model can be optimized with a genetic algorithm. The optimum rolling parameters were obtained.展开更多
This study introduces a novel approach to addressing the challenges of high-dimensional variables and strong nonlinearity in reservoir production and layer configuration optimization.For the first time,relational mach...This study introduces a novel approach to addressing the challenges of high-dimensional variables and strong nonlinearity in reservoir production and layer configuration optimization.For the first time,relational machine learning models are applied in reservoir development optimization.Traditional regression-based models often struggle in complex scenarios,but the proposed relational and regression-based composite differential evolution(RRCODE)method combines a Gaussian naive Bayes relational model with a radial basis function network regression model.This integration effectively captures complex relationships in the optimization process,improving both accuracy and convergence speed.Experimental tests on a multi-layer multi-channel reservoir model,the Egg reservoir model,and a real-field reservoir model(the S reservoir)demonstrate that RRCODE significantly reduces water injection and production volumes while increasing economic returns and cumulative oil recovery.Moreover,the surrogate models employed in RRCODE exhibit lightweight characteristics with low computational overhead.These results highlight RRCODE's superior performance in the integrated optimization of reservoir production and layer configurations,offering more efficient and economically viable solutions for oilfield development.展开更多
This study introduces a comprehensive and automated framework that leverages data-driven method-ologies to address various challenges in shale gas development and production.Specifically,it harnesses the power of Auto...This study introduces a comprehensive and automated framework that leverages data-driven method-ologies to address various challenges in shale gas development and production.Specifically,it harnesses the power of Automated Machine Learning(AutoML)to construct an ensemble model to predict the estimated ultimate recovery(EUR)of shale gas wells.To demystify the“black-box”nature of the ensemble model,KernelSHAP,a kernel-based approach to compute Shapley values,is utilized for elucidating the influential factors that affect shale gas production at both global and local scales.Furthermore,a bi-objective optimization algorithm named NSGA-Ⅱ is seamlessly incorporated to opti-mize hydraulic fracturing designs for production boost and cost control.This innovative framework addresses critical limitations often encountered in applying machine learning(ML)to shale gas pro-duction:the challenge of achieving sufficient model accuracy with limited samples,the multidisciplinary expertise required for developing robust ML models,and the need for interpretability in“black-box”models.Validation with field data from the Fuling shale gas field in the Sichuan Basin substantiates the framework's efficacy in enhancing the precision and applicability of data-driven techniques.The test accuracy of the ensemble ML model reached 83%compared to a maximum of 72%of single ML models.The contribution of each geological and engineering factor to the overall production was quantitatively evaluated.Fracturing design optimization raised EUR by 7%-34%under different production and cost tradeoff scenarios.The results empower domain experts to conduct more precise and objective data-driven analyses and optimizations for shale gas production with minimal expertise in data science.展开更多
Dear Editor,This letter proposes a convex optimization-based model predictive control(MPC)autonomous guidance method for the Mars ascent vehicle(MAV).We use the modified chebyshev-picard iteration(MCPI)to solve optimi...Dear Editor,This letter proposes a convex optimization-based model predictive control(MPC)autonomous guidance method for the Mars ascent vehicle(MAV).We use the modified chebyshev-picard iteration(MCPI)to solve optimization sub-problems within the MPC framework,eliminating the dynamic constraints in solving the optimal control problem and enhancing the convergence performance of the algorithm.Moreover,this method can repeatedly perform trajectory optimization calculations at a high frequency,achieving timely correction of the optimal control command.Numerical simulations demonstrate that the method can satisfy the requirements of rapid computation and reliability for the MAV system when considering uncertainties and perturbations.展开更多
Promoting the high penetration of renewable energies like photovoltaic(PV)systems has become an urgent issue for expanding modern power grids and has accomplished several challenges compared to existing distribution g...Promoting the high penetration of renewable energies like photovoltaic(PV)systems has become an urgent issue for expanding modern power grids and has accomplished several challenges compared to existing distribution grids.This study measures the effectiveness of the Puma optimizer(PO)algorithm in parameter estimation of PSC(perovskite solar cells)dynamic models with hysteresis consideration considering the electric field effects on operation.The models used in this study will incorporate hysteresis effects to capture the time-dependent behavior of PSCs accurately.The PO optimizes the proposed modified triple diode model(TDM)with a variable voltage capacitor and resistances(VVCARs)considering the hysteresis behavior.The suggested PO algorithm contrasts with other wellknown optimizers from the literature to demonstrate its superiority.The results emphasize that the PO realizes a lower RMSE(Root mean square errors),which proves its capability and efficacy in parameter extraction for the models.The statistical results emphasize the efficiency and supremacy of the proposed PO compared to the other well-known competing optimizers.The convergence rates show good,fast,and stable convergence rates with lower RMSE via PO compared to the other five competitive optimizers.Moreover,the lowermean realized via the PO optimizer is illustrated by the box plot for all optimizers.展开更多
This paper aims to study the optimal control and algorithm implementation of a generalized epidemic model governed by reaction-diffusion equations.Considering individual mobility,this paper first proposes a reaction-d...This paper aims to study the optimal control and algorithm implementation of a generalized epidemic model governed by reaction-diffusion equations.Considering individual mobility,this paper first proposes a reaction-diffusion epidemic model with two strains.Furthermore,applying vaccines as a control strategy in the model,an optimal control problem is proposed to increase the number of healthy individuals while reducing control costs.By applying the truncation function technique and the operator semigroup methods,we prove the existence and uniqueness of a globally positive strong solution for the control model.The existence of the optimal control strategy is proven by using functional analysis theory and minimum sequence methods.The first-order necessary condition satisfied by the optimal control is established by employing the dual techniques.Finally,a specific example and its algorithm are provided.展开更多
Wake effects in large-scalewind farms significantly reduce energy capture efficiency.ActiveWakeControl(AWC),particularly through intentional yaw misalignment of upstream turbines,has emerged as a promising strategy to...Wake effects in large-scalewind farms significantly reduce energy capture efficiency.ActiveWakeControl(AWC),particularly through intentional yaw misalignment of upstream turbines,has emerged as a promising strategy to mitigate these losses by redirecting wakes away from downstream turbines.However,the effectiveness of yaw-based AWC is highly dependent on the accuracy of the underlying wake prediction models,which often require site-specific adjustments to reflect local atmospheric conditions and turbine characteristics.This paper presents an integrated,data-driven framework tomaximize wind farmpower output.Themethodology consists of three key stages.First,a practical simulation-assisted matching method is developed to estimate the True North Alignment(TNA)of each turbine using historical Supervisory Control and Data Acquisition(SCADA)data,resolving a common source of operational uncertainty.Second,key wake expansion parameters of the Floris engineering wake model are calibrated using site-specific SCADA power data,tailoring the model to the JibeiWind Farm in China.Finally,using this calibrated model,the derivative-free solver NOMAD is employed to determine the optimal yaw angle settings for an 11-turbine cluster under various wind conditions.Simulation studies,based on real operational scenarios,demonstrate the effectiveness of the proposed framework.The optimized yaw control strategies achieved total power output gains of up to 5.4%compared to the baseline zero-yaw operation under specific wake-inducing conditions.Crucially,the analysis reveals that using the site-specific calibrated model for optimization yields substantially better results than using a model with generic parameters,providing an additional power gain of up to 1.43%in tested scenarios.These findings underscore the critical importance of TNA estimation and site-specific model calibration for developing effective AWC strategies.The proposed integrated approach provides a robust and practical workflow for designing and pre-validating yaw control settings,offering a valuable tool for enhancing the economic performance of wind farms.展开更多
The carbon emissions and cost during the construction phase are significant contributors to the oilfield lifecycle.As oilfields enter the late stage,the adaptability of facilities decreases.To achieve sustainable deve...The carbon emissions and cost during the construction phase are significant contributors to the oilfield lifecycle.As oilfields enter the late stage,the adaptability of facilities decreases.To achieve sustainable development,oilfield reconstruction was usually conducted in discrete rather than continuous space.Motivated by economic and sustainability goals,a 3-phase heuristic model for oilfield reconstruction was developed to mine potential locations in continuous space.In phase 1,considering the process characteristics of the oil and gas gathering system,potential locations were mined in continuous space.In phase 2,incorporating comprehensive reconstruction measures,a reconstruction model was established in discrete space.In phase 3,the topology was further adjusted in continuous space.Subsequently,the model was transformed into a single-objective mixed integer linear programming model using the augmented ε-constraint method.Numerical experiments revealed that the small number of potential locations could effectively reduce the reconstruction cost,and the quality of potential locations mined in phase 1 surpassed those generated in random or grid form.Case studies showed that cost and carbon emissions for a new block were reduced by up to 10.45% and 7.21 %,respectively.These reductions were because the potential locations mined in 1P reduced the number of metering stations,and 3P adjusted the locations of metering stations in continuous space to shorten the pipeline length.For an old oilfield,the load and connection ratios of the old metering station increased to 89.7% and 94.9%,respectively,enhancing operation efficiency.Meanwhile,recycling facilitated the diversification of reconstruction measures and yielded a profit of 582,573 ¥,constituting 5.56% of the total cost.This study adopted comprehensive reconstruction measures and tapped into potential reductions in cost and carbon emissions for oilfield reconstruction,offering valuable insights for future oilfield design and construction.展开更多
This study proposes a multi-objective optimization framework for electric winches in fiber-reinforced plastic(FRP)fishing vessels to address critical limitations of conventional designs,including excessive weight,mate...This study proposes a multi-objective optimization framework for electric winches in fiber-reinforced plastic(FRP)fishing vessels to address critical limitations of conventional designs,including excessive weight,material inefficiency,and performance redundancy.By integrating surrogate modeling techniques with a multi-objective genetic algorithm(MOGA),we have developed a systematic approach that encompasses parametric modeling,finite element analysis under extreme operational conditions,and multi-fidelity performance evaluation.Through a 10-t electric winch case study,the methodology’s effectiveness is demonstrated via parametric characterization of structural integrity,stiffness behavior,and mass distribution.The comparative analysis identified optimal surrogate models for predicting key performance metrics,which enabled the construction of a robust multi-objective optimization model.The MOGA-derived Pareto solutions produced a design configuration achieving 7.86%mass reduction,2.01%safety factor improvement,and 23.97%deformation mitigation.Verification analysis confirmed the optimization scheme’s reliability in balancing conflicting design requirements.This research establishes a generalized framework for marine deck machinery modernization,particularly addressing the structural compatibility challenges in FRP vessel retrofitting.The proposed methodology demonstrates significant potential for facilitating sustainable upgrades of fishing vessel equipment through systematic performance optimization.展开更多
Hydrocracking is one of the most important petroleum refining processes that converts heavy oils into gases,naphtha,diesel,and other products through cracking reactions.Multi-objective optimization algorithms can help...Hydrocracking is one of the most important petroleum refining processes that converts heavy oils into gases,naphtha,diesel,and other products through cracking reactions.Multi-objective optimization algorithms can help refining enterprises determine the optimal operating parameters to maximize product quality while ensuring product yield,or to increase product yield while reducing energy consumption.This paper presents a multi-objective optimization scheme for hydrocracking based on an improved SPEA2-PE algorithm,which combines path evolution operator and adaptive step strategy to accelerate the convergence speed and improve the computational accuracy of the algorithm.The reactor model used in this article is simulated based on a twenty-five lumped kinetic model.Through model and test function verification,the proposed optimization scheme exhibits significant advantages in the multiobjective optimization process of hydrocracking.展开更多
Fractional differential equations(FDEs)provide a powerful tool for modeling systems with memory and non-local effects,but understanding their underlying structure remains a significant challenge.While numerous numeric...Fractional differential equations(FDEs)provide a powerful tool for modeling systems with memory and non-local effects,but understanding their underlying structure remains a significant challenge.While numerous numerical and semi-analytical methods exist to find solutions,new approaches are needed to analyze the intrinsic properties of the FDEs themselves.This paper introduces a novel computational framework for the structural analysis of FDEs involving iterated Caputo derivatives.The methodology is based on a transformation that recasts the original FDE into an equivalent higher-order form,represented as the sum of a closed-form,integer-order component G(y)and a residual fractional power seriesΨ(x).This transformed FDE is subsequently reduced to a first-order ordinary differential equation(ODE).The primary novelty of the proposed methodology lies in treating the structure of the integer-order component G(y)not as fixed,but as a parameterizable polynomial whose coefficients can be determined via global optimization.Using particle swarm optimization,the framework identifies an optimal ODE architecture by minimizing a dual objective that balances solution accuracy against a high-fidelity reference and the magnitude of the truncated residual series.The effectiveness of the approach is demonstrated on both a linear FDE and a nonlinear fractional Riccati equation.Results demonstrate that the framework successfully identifies an optimal,low-degree polynomial ODE architecture that is not necessarily identical to the forcing function of the original FDE.This work provides a new tool for analyzing the underlying structure of FDEs and gaining deeper insights into the interplay between local and non-local dynamics in fractional systems.展开更多
Assessing the stability of slopes is one of the crucial tasks of geotechnical engineering for assessing and managing risks related to natural hazards,directly affecting safety and sustainable development.This study pr...Assessing the stability of slopes is one of the crucial tasks of geotechnical engineering for assessing and managing risks related to natural hazards,directly affecting safety and sustainable development.This study primarily focuses on developing robust and practical hybrid models to predict the slope stability status of circular failure mode.For this purpose,three robust models were developed using a database including 627 case histories of slope stability status.The models were developed using the random forest(RF),support vector machine(SVM),and extreme gradient boosting(XGB)techniques,employing 5-fold cross validation approach.To enhance the performance of models,this study employs Bayesian optimizer(BO)to fine-tuning their hyperparameters.The results indicate that the performance order of the three developed models is RF-BO>SVM-BO>XGB-BO.Furthermore,comparing the developed models with previous models,it was found that the RF-BO model can effectively determine the slope stability status with outstanding performance.This implies that the RF-BO model could serve as a dependable tool for project managers,assisting in the evaluation of slope stability during both the design and operational phases of projects,despite the inherent challenges in this domain.The results regarding the importance of influencing parameters indicate that cohesion,friction angle,and slope height exert the most significant impact on slope stability status.This suggests that concentrating on these parameters and employing the RF-BO model can effectively mitigate the severity of geohazards in the short-term and contribute to the attainment of long-term sustainable development objectives.展开更多
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
基金supported by the Science and Technology Research Project of Henan Province(242102241055)the Industry-University-Research Collaborative Innovation Base on Automobile Lightweight of“Science and Technology Innovation in Central Plains”(2024KCZY315)the Opening Fund of State Key Laboratory of Structural Analysis,Optimization and CAE Software for Industrial Equipment(GZ2024A03-ZZU).
文摘The moving morphable component(MMC)topology optimization method,as a typical explicit topology optimization method,has been widely concerned.In the MMC topology optimization framework,the surrogate material model is mainly used for finite element analysis at present,and the effectiveness of the surrogate material model has been fully confirmed.However,there are some accuracy problems when dealing with boundary elements using the surrogate material model,which will affect the topology optimization results.In this study,a boundary element reconstruction(BER)model is proposed based on the surrogate material model under the MMC topology optimization framework to improve the accuracy of topology optimization.The proposed BER model can reconstruct the boundary elements by refining the local meshes and obtaining new nodes in boundary elements.Then the density of boundary elements is recalculated using the new node information,which is more accurate than the original model.Based on the new density of boundary elements,the material properties and volume information of the boundary elements are updated.Compared with other finite element analysis methods,the BER model is simple and feasible and can improve computational accuracy.Finally,the effectiveness and superiority of the proposed method are verified by comparing it with the optimization results of the original surrogate material model through several numerical examples.
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
文摘Early and accurate detection of bone cancer and marrow cell abnormalities is critical for timely intervention and improved patient outcomes.This paper proposes a novel hybrid deep learning framework that integrates a Convolutional Neural Network(CNN)with a Bidirectional Long Short-Term Memory(BiLSTM)architecture,optimized using the Firefly Optimization algorithm(FO).The proposed CNN-BiLSTM-FO model is tailored for structured biomedical data,capturing both local patterns and sequential dependencies in diagnostic features,while the Firefly Algorithm fine-tunes key hyperparameters to maximize predictive performance.The approach is evaluated on two benchmark biomedical datasets:one comprising diagnostic data for bone cancer detection and another for identifying marrow cell abnormalities.Experimental results demonstrate that the proposed method outperforms standard deep learning models,including CNN,LSTM,BiLSTM,and CNN-LSTM hybrids,significantly.The CNNBiLSTM-FO model achieves an accuracy of 98.55%for bone cancer detection and 96.04%for marrow abnormality classification.The paper also presents a detailed complexity analysis of the proposed algorithm and compares its performance across multiple evaluation metrics such as precision,recall,F1-score,and AUC.The results confirm the effectiveness of the firefly-based optimization strategy in improving classification accuracy and model robustness.This work introduces a scalable and accurate diagnostic solution that holds strong potential for integration into intelligent clinical decision-support systems.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41705082, 41475101, 41690122(41690120))a Chinese Academy of Sciences Strategic Priority Project-the Western Pacific Ocean System (Grant Nos. XDA11010105 and XDA11020306)+1 种基金the National Programme on Global Change and Air–Sea Interaction (Grant Nos. GASI-IPOVAI06 and GASI-IPOVAI-01-01)the China Postdoctoral Science Foundation, and a Qingdao Postdoctoral Application Research Project
文摘Large biases exist in real-time ENSO prediction, which can be attributed to uncertainties in initial conditions and model parameters. Previously, a 4D variational （4D-Vat） data assimilation system was developed for an intermediate coupled model （ICM） and used to improve ENSO modeling through optimized initial conditions. In this paper, this system is further applied to optimize model parameters. In the ICM used, one important process for ENSO is related to the anomalous temperature of subsurface water entrained into the mixed layer （Te）, which is empirically and explicitly related to sea level （SL） variation. The strength of the thermocline effect on SST （referred to simply as ＂the thermocline effect＂） is represented by an introduced parameter, （l＇Te. A numerical procedure is developed to optimize this model parameter through the 4D-Var assimilation of SST data in a twin experiment context with an idealized setting. Experiments having their initial condition optimized only, and having their initial condition plus this additional model parameter optimized, are compared. It is shown that ENSO evolution can be more effectively recovered by including the additional optimization of this parameter in ENSO modeling. The demonstrated feasibility of optimizing model parameters and initial conditions together through the 4D-Var method provides a modeling platform for ENSO studies. Further applications of the 4D-Vat data assimilation system implemented in the ICM are also discussed.
文摘A support vector machine with guadratic polynomial kernel function based nonlinear model multi-step-ahead optimizing predictive controller was presented. A support vector machine based predictive model was established by black-box identification. And a quadratic objective function with receding horizon was selected to obtain the controller output. By solving a nonlinear optimization problem with equality constraint of model output and boundary constraint of controller output using Nelder-Mead simplex direct search method, a sub-optimal control law was achieved in feature space. The effect of the controller was demonstrated on a recognized benchmark problem and a continuous-stirred tank reactor. The simulation results show that the multi-step-ahead predictive controller can be well applied to nonlinear system, with better performance in following reference trajectory and disturbance-rejection.
文摘In this paper, a method of optimizing the number of hidden layer neurons has been put forward. This optimizing method is suitable for three layers B-p network. The purpose of this optimizing method is to reduce the predicting errors when the model is used as predicting model. As an example of application, a predicting model of steel end-quench curves has been designed by using this optimizing method. The result shows that the optimization of ANN hidden layer architecture has an effect on reducing predicting errors.
文摘By means of fracture testing on roller-compacted concrete （RCC） three-point bending beams with two different specimen sizes, the P-CMOD complete curve for RCC was gained. Furthermore, by applying double-K fracture theory, KiniⅠC,KunⅠC, as well as the critical effective crack length and the critical crack tip opening displacement, were evaluated. Based on the double-K fracture parameters above, the calculation model of equivalent strength for induced crack was established, thus the calculation method on its initiation, stable propagation and unstable fracture was ascertained. Moreover, the finite element simulation analysis of stress field in ShaPai arch dam and the on-site observational splaying points of induced crack at different altitudes validated the reliability of the model. Finally, crack inducer′s optimal setting in RCC arch dam was studied. It improves the design level of induced crack in RCC arch dam and satisfies the necessity of engineering practice.
文摘Based on experimental data, a nonlinear model about tensile strength and technical parameters such as Mn and St content, finishing rolling speed and finishing rolling temperature for deformed steel bars in the process of hot rolling was established by using artificial neural networks. The model can be optimized with a genetic algorithm. The optimum rolling parameters were obtained.
基金supported by the National Natural Science Foundation of China under Grant 52325402,52274057,and 52074340the National Key R&D Program of China under Grant 2023YFB4104200+2 种基金the Major Scientific and Technological Projects of CNOOC under Grant CCL2022RCPS0397RSN111 Project under Grant B08028China Scholarship Council under Grant 202306450108.
文摘This study introduces a novel approach to addressing the challenges of high-dimensional variables and strong nonlinearity in reservoir production and layer configuration optimization.For the first time,relational machine learning models are applied in reservoir development optimization.Traditional regression-based models often struggle in complex scenarios,but the proposed relational and regression-based composite differential evolution(RRCODE)method combines a Gaussian naive Bayes relational model with a radial basis function network regression model.This integration effectively captures complex relationships in the optimization process,improving both accuracy and convergence speed.Experimental tests on a multi-layer multi-channel reservoir model,the Egg reservoir model,and a real-field reservoir model(the S reservoir)demonstrate that RRCODE significantly reduces water injection and production volumes while increasing economic returns and cumulative oil recovery.Moreover,the surrogate models employed in RRCODE exhibit lightweight characteristics with low computational overhead.These results highlight RRCODE's superior performance in the integrated optimization of reservoir production and layer configurations,offering more efficient and economically viable solutions for oilfield development.
基金funded by the National Natural Science Foundation of China(42050104).
文摘This study introduces a comprehensive and automated framework that leverages data-driven method-ologies to address various challenges in shale gas development and production.Specifically,it harnesses the power of Automated Machine Learning(AutoML)to construct an ensemble model to predict the estimated ultimate recovery(EUR)of shale gas wells.To demystify the“black-box”nature of the ensemble model,KernelSHAP,a kernel-based approach to compute Shapley values,is utilized for elucidating the influential factors that affect shale gas production at both global and local scales.Furthermore,a bi-objective optimization algorithm named NSGA-Ⅱ is seamlessly incorporated to opti-mize hydraulic fracturing designs for production boost and cost control.This innovative framework addresses critical limitations often encountered in applying machine learning(ML)to shale gas pro-duction:the challenge of achieving sufficient model accuracy with limited samples,the multidisciplinary expertise required for developing robust ML models,and the need for interpretability in“black-box”models.Validation with field data from the Fuling shale gas field in the Sichuan Basin substantiates the framework's efficacy in enhancing the precision and applicability of data-driven techniques.The test accuracy of the ensemble ML model reached 83%compared to a maximum of 72%of single ML models.The contribution of each geological and engineering factor to the overall production was quantitatively evaluated.Fracturing design optimization raised EUR by 7%-34%under different production and cost tradeoff scenarios.The results empower domain experts to conduct more precise and objective data-driven analyses and optimizations for shale gas production with minimal expertise in data science.
基金supported by the National Defense Basic Scientific Research Program(JCKY2021603B030)the National Natural Science Foundation of China(62273118,12150008)the Natural Science Foundation of Heilongjiang Province(LH2022F023).
文摘Dear Editor,This letter proposes a convex optimization-based model predictive control(MPC)autonomous guidance method for the Mars ascent vehicle(MAV).We use the modified chebyshev-picard iteration(MCPI)to solve optimization sub-problems within the MPC framework,eliminating the dynamic constraints in solving the optimal control problem and enhancing the convergence performance of the algorithm.Moreover,this method can repeatedly perform trajectory optimization calculations at a high frequency,achieving timely correction of the optimal control command.Numerical simulations demonstrate that the method can satisfy the requirements of rapid computation and reliability for the MAV system when considering uncertainties and perturbations.
基金supported via funding from Prince Sattam Bin Abdulaziz University project number(PSAU/2025/R/1446).
文摘Promoting the high penetration of renewable energies like photovoltaic(PV)systems has become an urgent issue for expanding modern power grids and has accomplished several challenges compared to existing distribution grids.This study measures the effectiveness of the Puma optimizer(PO)algorithm in parameter estimation of PSC(perovskite solar cells)dynamic models with hysteresis consideration considering the electric field effects on operation.The models used in this study will incorporate hysteresis effects to capture the time-dependent behavior of PSCs accurately.The PO optimizes the proposed modified triple diode model(TDM)with a variable voltage capacitor and resistances(VVCARs)considering the hysteresis behavior.The suggested PO algorithm contrasts with other wellknown optimizers from the literature to demonstrate its superiority.The results emphasize that the PO realizes a lower RMSE(Root mean square errors),which proves its capability and efficacy in parameter extraction for the models.The statistical results emphasize the efficiency and supremacy of the proposed PO compared to the other well-known competing optimizers.The convergence rates show good,fast,and stable convergence rates with lower RMSE via PO compared to the other five competitive optimizers.Moreover,the lowermean realized via the PO optimizer is illustrated by the box plot for all optimizers.
基金Supported by the National Natural Science Foundation of China(Grant Nos.125610811246108612271147)。
文摘This paper aims to study the optimal control and algorithm implementation of a generalized epidemic model governed by reaction-diffusion equations.Considering individual mobility,this paper first proposes a reaction-diffusion epidemic model with two strains.Furthermore,applying vaccines as a control strategy in the model,an optimal control problem is proposed to increase the number of healthy individuals while reducing control costs.By applying the truncation function technique and the operator semigroup methods,we prove the existence and uniqueness of a globally positive strong solution for the control model.The existence of the optimal control strategy is proven by using functional analysis theory and minimum sequence methods.The first-order necessary condition satisfied by the optimal control is established by employing the dual techniques.Finally,a specific example and its algorithm are provided.
基金the Science and Technology Project of China South Power Grid Co., Ltd. under Grant No. 036000KK52222044 (GDKJXM20222430).
文摘Wake effects in large-scalewind farms significantly reduce energy capture efficiency.ActiveWakeControl(AWC),particularly through intentional yaw misalignment of upstream turbines,has emerged as a promising strategy to mitigate these losses by redirecting wakes away from downstream turbines.However,the effectiveness of yaw-based AWC is highly dependent on the accuracy of the underlying wake prediction models,which often require site-specific adjustments to reflect local atmospheric conditions and turbine characteristics.This paper presents an integrated,data-driven framework tomaximize wind farmpower output.Themethodology consists of three key stages.First,a practical simulation-assisted matching method is developed to estimate the True North Alignment(TNA)of each turbine using historical Supervisory Control and Data Acquisition(SCADA)data,resolving a common source of operational uncertainty.Second,key wake expansion parameters of the Floris engineering wake model are calibrated using site-specific SCADA power data,tailoring the model to the JibeiWind Farm in China.Finally,using this calibrated model,the derivative-free solver NOMAD is employed to determine the optimal yaw angle settings for an 11-turbine cluster under various wind conditions.Simulation studies,based on real operational scenarios,demonstrate the effectiveness of the proposed framework.The optimized yaw control strategies achieved total power output gains of up to 5.4%compared to the baseline zero-yaw operation under specific wake-inducing conditions.Crucially,the analysis reveals that using the site-specific calibrated model for optimization yields substantially better results than using a model with generic parameters,providing an additional power gain of up to 1.43%in tested scenarios.These findings underscore the critical importance of TNA estimation and site-specific model calibration for developing effective AWC strategies.The proposed integrated approach provides a robust and practical workflow for designing and pre-validating yaw control settings,offering a valuable tool for enhancing the economic performance of wind farms.
基金supported by the National Natural Science Foundation of China (Grant No.52174065)the National Natural Science Foundation of China (Grant No.52304071)+1 种基金China University of Petroleum,Beijing (Grant No.ZX20220040)MOE Key Laboratory of Petroleum Engineering (China University of Petroleum,No.2462024PTJS002)。
文摘The carbon emissions and cost during the construction phase are significant contributors to the oilfield lifecycle.As oilfields enter the late stage,the adaptability of facilities decreases.To achieve sustainable development,oilfield reconstruction was usually conducted in discrete rather than continuous space.Motivated by economic and sustainability goals,a 3-phase heuristic model for oilfield reconstruction was developed to mine potential locations in continuous space.In phase 1,considering the process characteristics of the oil and gas gathering system,potential locations were mined in continuous space.In phase 2,incorporating comprehensive reconstruction measures,a reconstruction model was established in discrete space.In phase 3,the topology was further adjusted in continuous space.Subsequently,the model was transformed into a single-objective mixed integer linear programming model using the augmented ε-constraint method.Numerical experiments revealed that the small number of potential locations could effectively reduce the reconstruction cost,and the quality of potential locations mined in phase 1 surpassed those generated in random or grid form.Case studies showed that cost and carbon emissions for a new block were reduced by up to 10.45% and 7.21 %,respectively.These reductions were because the potential locations mined in 1P reduced the number of metering stations,and 3P adjusted the locations of metering stations in continuous space to shorten the pipeline length.For an old oilfield,the load and connection ratios of the old metering station increased to 89.7% and 94.9%,respectively,enhancing operation efficiency.Meanwhile,recycling facilitated the diversification of reconstruction measures and yielded a profit of 582,573 ¥,constituting 5.56% of the total cost.This study adopted comprehensive reconstruction measures and tapped into potential reductions in cost and carbon emissions for oilfield reconstruction,offering valuable insights for future oilfield design and construction.
基金supported by the Basic Public Welfare Research Program of Zhejiang Province(No.LGN22E050005).
文摘This study proposes a multi-objective optimization framework for electric winches in fiber-reinforced plastic(FRP)fishing vessels to address critical limitations of conventional designs,including excessive weight,material inefficiency,and performance redundancy.By integrating surrogate modeling techniques with a multi-objective genetic algorithm(MOGA),we have developed a systematic approach that encompasses parametric modeling,finite element analysis under extreme operational conditions,and multi-fidelity performance evaluation.Through a 10-t electric winch case study,the methodology’s effectiveness is demonstrated via parametric characterization of structural integrity,stiffness behavior,and mass distribution.The comparative analysis identified optimal surrogate models for predicting key performance metrics,which enabled the construction of a robust multi-objective optimization model.The MOGA-derived Pareto solutions produced a design configuration achieving 7.86%mass reduction,2.01%safety factor improvement,and 23.97%deformation mitigation.Verification analysis confirmed the optimization scheme’s reliability in balancing conflicting design requirements.This research establishes a generalized framework for marine deck machinery modernization,particularly addressing the structural compatibility challenges in FRP vessel retrofitting.The proposed methodology demonstrates significant potential for facilitating sustainable upgrades of fishing vessel equipment through systematic performance optimization.
基金supported by National Key Research and Development Program of China (2023YFB3307800)National Natural Science Foundation of China (Key Program: 62136003, 62373155)+1 种基金Major Science and Technology Project of Xinjiang (No. 2022A01006-4)the Fundamental Research Funds for the Central Universities。
文摘Hydrocracking is one of the most important petroleum refining processes that converts heavy oils into gases,naphtha,diesel,and other products through cracking reactions.Multi-objective optimization algorithms can help refining enterprises determine the optimal operating parameters to maximize product quality while ensuring product yield,or to increase product yield while reducing energy consumption.This paper presents a multi-objective optimization scheme for hydrocracking based on an improved SPEA2-PE algorithm,which combines path evolution operator and adaptive step strategy to accelerate the convergence speed and improve the computational accuracy of the algorithm.The reactor model used in this article is simulated based on a twenty-five lumped kinetic model.Through model and test function verification,the proposed optimization scheme exhibits significant advantages in the multiobjective optimization process of hydrocracking.
基金Research Council of Lithuania(LMTLT),agreement No.S-PD-24-120Research Council of Lithuania(LMTLT),agreement No.S-PD-24-120funded by the Research Council of Lithuania.
文摘Fractional differential equations(FDEs)provide a powerful tool for modeling systems with memory and non-local effects,but understanding their underlying structure remains a significant challenge.While numerous numerical and semi-analytical methods exist to find solutions,new approaches are needed to analyze the intrinsic properties of the FDEs themselves.This paper introduces a novel computational framework for the structural analysis of FDEs involving iterated Caputo derivatives.The methodology is based on a transformation that recasts the original FDE into an equivalent higher-order form,represented as the sum of a closed-form,integer-order component G(y)and a residual fractional power seriesΨ(x).This transformed FDE is subsequently reduced to a first-order ordinary differential equation(ODE).The primary novelty of the proposed methodology lies in treating the structure of the integer-order component G(y)not as fixed,but as a parameterizable polynomial whose coefficients can be determined via global optimization.Using particle swarm optimization,the framework identifies an optimal ODE architecture by minimizing a dual objective that balances solution accuracy against a high-fidelity reference and the magnitude of the truncated residual series.The effectiveness of the approach is demonstrated on both a linear FDE and a nonlinear fractional Riccati equation.Results demonstrate that the framework successfully identifies an optimal,low-degree polynomial ODE architecture that is not necessarily identical to the forcing function of the original FDE.This work provides a new tool for analyzing the underlying structure of FDEs and gaining deeper insights into the interplay between local and non-local dynamics in fractional systems.
文摘Assessing the stability of slopes is one of the crucial tasks of geotechnical engineering for assessing and managing risks related to natural hazards,directly affecting safety and sustainable development.This study primarily focuses on developing robust and practical hybrid models to predict the slope stability status of circular failure mode.For this purpose,three robust models were developed using a database including 627 case histories of slope stability status.The models were developed using the random forest(RF),support vector machine(SVM),and extreme gradient boosting(XGB)techniques,employing 5-fold cross validation approach.To enhance the performance of models,this study employs Bayesian optimizer(BO)to fine-tuning their hyperparameters.The results indicate that the performance order of the three developed models is RF-BO>SVM-BO>XGB-BO.Furthermore,comparing the developed models with previous models,it was found that the RF-BO model can effectively determine the slope stability status with outstanding performance.This implies that the RF-BO model could serve as a dependable tool for project managers,assisting in the evaluation of slope stability during both the design and operational phases of projects,despite the inherent challenges in this domain.The results regarding the importance of influencing parameters indicate that cohesion,friction angle,and slope height exert the most significant impact on slope stability status.This suggests that concentrating on these parameters and employing the RF-BO model can effectively mitigate the severity of geohazards in the short-term and contribute to the attainment of long-term sustainable development objectives.
