Shock wave lithotripsy(SWL) was introduced in 1980, modernizing the treatment of upper urinary tract stones, and quickly became the most commonly utilized technique to treat kidney stones. Over the past 5-10 years, ho...Shock wave lithotripsy(SWL) was introduced in 1980, modernizing the treatment of upper urinary tract stones, and quickly became the most commonly utilized technique to treat kidney stones. Over the past 5-10 years, however, use of SWL has been declining because it is not as reliably effective as more modern technology. SWL success rates vary considerably and there is abundant literature predicting outcome based on patient- and stone-specific parameters. Herein we discuss the ways to optimize SWL outcomes by reviewing proper patient selection utilizing stone characteristics and patient features. Stone size, number, location, density, composition, and patient body habitus and renal anatomy are all discussed. We also review the technical parameters during SWL that can be controlled to improve results further, including type of anesthesia, coupling, shock wave rate, focal zones, pressures, and active monitoring. Following these basic principles and selection criteria will help maximize success rate.展开更多
Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen e...Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.展开更多
In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the op...In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion...Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a syst...Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a systematic overview of recent advancements in metaheuristic algorithms and highlights their applications in e-Health.We selected representative algorithms published between 2019 and 2024,and quantified their influence using an entropy-weighted method based on journal impact factors and citation counts.CThe Harris Hawks Optimizer(HHO)demonstrated the highest early citation impact.The study also examined applications in disease prediction models,clinical decision support,and intelligent health monitoring.Notably,the Chaotic Salp Swarm Algorithm(CSSA)achieved 99.69% accuracy in detecting Novel Coronavirus Pneumonia.Future research should progress in three directions:improving theoretical reliability and performance predictability in medical contexts;designing more adaptive and deployable mechanisms for real-world systems;and integrating ethical,privacy,and technological considerations to enable precision medicine,digital twins,and intelligent medical devices.展开更多
Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightw...Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightweight of two distinct material characteristics.MFHTWTs can achieve energy absorption through the coupling of material plastic deformation and fracture,demonstrating significant engineering value in passive safety.This review provides a comprehensive examination of the crashworthiness topology optimization of MFHTWTs,aiming to demonstrate that a deeply integrated approach combining topology and parameter opti-mization can realize an optimal design method for MFHTWTs,thereby maximizing the functional utilization of limited material.Firstly,the review highlights the crashworthiness topology optimization methods(CTOMs)based on thin-walled structures.With a particular focus on metal,the review discusses both the practical ap-plicability and limitations of CTOMs under crash conditions.Additionally,based on the methodology of the equivalent static load method(ESLM),the review emphasizes that topology optimization methods considering continuous fiber paths and multi-material interface connections are also applicable to the crashworthiness op-timization of MFHTWTs.Furthermore,to couple structural parameters and configuration characteristics,in-tegrated topology optimization methods,including parameter optimization,are proposed to provide a valuable reference for the global optimization of MFHTWTs.Thus,these methods can establish the mapping relationship between key parameters and the structural energy absorption capacity.展开更多
Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified...Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.展开更多
The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous c...The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.展开更多
Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structu...Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.展开更多
Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentrat...Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentration,and forming defects are prone to occur during their extrusion.This study focuses on an Al-Zn-Mg-Cu ultra-high-strength aluminum alloy profile with a double-U,multi-cavity thin-walled structure.Firstly,hot compression experiments were conducted at temperatures of 350○C,400○C,and 450○C,with strain rates of 0.01 and 1.0 s^(−1),to investigate the plastic deformation behavior of the material.Subsequently,a 3D coupled thermo-mechanical extrusion simulation model was established using Deform-3D to systematically analyze the influence of die structure and process parameters on metal flow velocity,effective stress/strain,and temperature distribution.The simulation revealed significant velocity differences,stress concentration,and uneven temperature distribution.Key parameters,including mesh density,extrusion ratio,die fillet,and bearing length,were optimized through full-factorial experiments.This optimization,combined with a stepped flow-guiding die design,effectively improved the metal flow pattern during extrusion.Trial production based on both the initial and optimized parameters were carried out.A comparative analysis demonstrates that the optimized scheme results in a final profile whose cross-section matches the target design closely,with complete filling of complex features and no obvious forming defects.This research provides a valuable reference for the extrusion process optimization and die design of complex-section profiles made from ultra-high-strength aluminum alloys.展开更多
The airplane refueling problem can be stated as follows.We are given n airplanes which can refuel one another during the flight.Each airplane has a reservoir volume wj(liters)and a consumption rate pj(liters per kilom...The airplane refueling problem can be stated as follows.We are given n airplanes which can refuel one another during the flight.Each airplane has a reservoir volume wj(liters)and a consumption rate pj(liters per kilometer).As soon as one airplane runs out of fuel,it is dropping out of the flight.The problem asks for finding a refueling scheme such that the last plane in the air reach a maximal distance.An equivalent version is the n-vehicle exploration problem.The computational complexity of this non-linear combinatorial optimization problem is open so far.This paper employs the neighborhood exchange method of single-machine scheduling to study the precedence relations of jobs,so as to improve the necessary and sufficiency conditions of optimal solutions,and establish an efficient heuristic algorithm which is a generalization of several existing special algorithms.展开更多
Traditional mining in open pit mines often uses explosives,leading to environmental hazards,with flyrock being a critical issue.In detail,excess flying rock beyond the designated explosion area was identified as the p...Traditional mining in open pit mines often uses explosives,leading to environmental hazards,with flyrock being a critical issue.In detail,excess flying rock beyond the designated explosion area was identified as the primary cause of fatal and non-fatal blasting hazards in open pit mining.Therefore,the accurate and reliable prediction of flyrock becomes crucial for effectively managing and mitigating associated problems.This study used the Light Gradient Boosting Machine(LightGBM)model to predict flyrock in a lead-zinc mine,with promising results.To improve its accuracy,multi-verse optimizer(MVO)and ant lion optimizer(ALO)metaheuristic algorithms were introduced.Results showed MVO-LightGBM outperformed conventional LightGBM.Additionally,decision tree(DT),support vector machine(SVM),and classification and regression tree(CART)models were trained and compared with MVO-LightGBM.The MVO-LightGBM model excelled over DT,SVM,and CART.This study highlights MVO-LightGBM's effectiveness and potential for broader applications.Furthermore,a multiple parametric sensitivity analysis(MPSA)algorithm was employed to specify the sensitivity of parameters.MPSA results indicated that the highest and lowest sensitivities are relevant to blasted rock per hole and spacing with theγ=1752.12 andγ=49.52,respectively.展开更多
Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introdu...Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.展开更多
With the increasing number of geosynchronous orbit satellites with expiring lifetime,spacecraft refueling is crucial in enhancing the economic benefits of on-orbit services.The existing studies tend to be based on pre...With the increasing number of geosynchronous orbit satellites with expiring lifetime,spacecraft refueling is crucial in enhancing the economic benefits of on-orbit services.The existing studies tend to be based on predetermined refueling duration;however,the precise mission scheduling solution will be difficult to apply due to uncertain refueling duration caused by orbital transfer deviations and stochastic actuator faults during actual on-orbit service.Therefore,this paper proposes a robust mission scheduling strategy for geosynchronous orbit spacecraft on-orbit refueling missions with uncertain refueling duration.Firstly,a robust mission scheduling model is constructed by introducing the budget uncertainty set to describe the uncertain refueling duration.Secondly,a hybrid harris hawks optimization algorithm is designed to explore the optimal mission allocation and refueling sequences,which combines cubic chaotic mapping to initialize the population,and the crossover in the genetic algorithm is introduced to enhance global convergence.Finally,the typical simulation examples are constructed with real-mission scenarios in three aspects to analyze:performance comparisons with various algorithms;robustness analyses via comparisons of different on-orbit refueling durations;investigations into the impacts of different initial population strategies on algorithm performance,demonstrating the proposed mission scheduling framework's robustness and effectiveness by comparing it with the exact mission scheduling.展开更多
Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.W...Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.展开更多
ThePigeon-InspiredOptimization(PIO)algorithmconstitutes ametaheuristic method derived fromthe homing behaviour of pigeons.Initially formulated for three-dimensional path planning in unmanned aerial vehicles(UAVs),the ...ThePigeon-InspiredOptimization(PIO)algorithmconstitutes ametaheuristic method derived fromthe homing behaviour of pigeons.Initially formulated for three-dimensional path planning in unmanned aerial vehicles(UAVs),the algorithmhas attracted considerable academic and industrial interest owing to its effective balance between exploration and exploitation,coupled with advantages in real-time performance and robustness.Nevertheless,as applications have diversified,limitations in convergence precision and a tendency toward premature convergence have become increasingly evident,highlighting a need for improvement.This reviewsystematically outlines the developmental trajectory of the PIO algorithm,with a particular focus on its core applications in UAV navigation,multi-objective formulations,and a spectrum of variantmodels that have emerged in recent years.It offers a structured analysis of the foundational principles underlying the PIO.It conducts a comparative assessment of various performance-enhanced versions,including hybrid models that integrate mechanisms from other optimization paradigms.Additionally,the strengths andweaknesses of distinct PIOvariants are critically examined frommultiple perspectives,including intrinsic algorithmic characteristics,suitability for specific application scenarios,objective function design,and the rigor of the statistical evaluation methodologies employed in empirical studies.Finally,this paper identifies principal challenges within current PIO research and proposes several prospective research directions.Future work should focus on mitigating premature convergence by refining the two-phase search structure and adjusting the exponential decrease of individual numbers during the landmark operator.Enhancing parameter adaptation strategies,potentially using reinforcement learning for dynamic tuning,and advancing theoretical analyses on convergence and complexity are also critical.Further applications should be explored in constrained path planning,Neural Architecture Search(NAS),and other real-worldmulti-objective problems.For Multi-objective PIO(MPIO),key improvements include controlling the growth of the external archive and designing more effective selection mechanisms to maintain convergence efficiency.These efforts are expected to strengthen both the theoretical foundation and practical versatility of PIO and its variants.展开更多
The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measu...The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.展开更多
The fast solution of linear equations has always been one of the hot spots in scientific computing.A kind of the diagonal matrix splitting iteration methods are provided,which is different from the classical matrix sp...The fast solution of linear equations has always been one of the hot spots in scientific computing.A kind of the diagonal matrix splitting iteration methods are provided,which is different from the classical matrix splitting methods.Taking the decomposition of the diagonal elements for coefficient matrix as the key point,some new preconditioners are constructed.Taking the tri-diagonal coefficient matrix as an example,the convergence domains and optimal relaxation factor of the new method are analyzed theoretically.The presented new iteration methods are applied to solve linear algebraic equations,even 2D and 3D diffusion problems with the fully implicit discretization.The results of numerical experiments are matched with the theoretical analysis,and show that the iteration numbers are reduced greatly.The superiorities of presented iteration methods exceed some classical iteration methods dramatically.展开更多
文摘Shock wave lithotripsy(SWL) was introduced in 1980, modernizing the treatment of upper urinary tract stones, and quickly became the most commonly utilized technique to treat kidney stones. Over the past 5-10 years, however, use of SWL has been declining because it is not as reliably effective as more modern technology. SWL success rates vary considerably and there is abundant literature predicting outcome based on patient- and stone-specific parameters. Herein we discuss the ways to optimize SWL outcomes by reviewing proper patient selection utilizing stone characteristics and patient features. Stone size, number, location, density, composition, and patient body habitus and renal anatomy are all discussed. We also review the technical parameters during SWL that can be controlled to improve results further, including type of anesthesia, coupling, shock wave rate, focal zones, pressures, and active monitoring. Following these basic principles and selection criteria will help maximize success rate.
基金Supported by the National Natural Science Foundation of China(No.52273056)the Science and Technology Development Program of Jilin Province,China(No.YDZJ202501ZYTS305)。
文摘Electrochemical water splitting represents a sustainable technology for hydrogen(H_(2))production.However,its large-scale implementation is hindered by the high overpotentials required for both the cathodic hydrogen evolution reaction(HER)and the anodic oxygen evolution reaction(OER).Transition metal-based catalysts have garnered significant research interest as promising alternatives to noble-metal catalysts,owing to their low cost,tunable composition,and noble-metal-like catalytic activity.Nevertheless,systematic reviews on their application as bifunctional catalysts for overall water splitting(OWS)are still limited.This review comprehensively outlines the principal categories of bifunctional transition metal electrocatalysts derived from electrospun nanofibers(NFs),including metals,oxides,phosphides,sulfides,and carbides.Key strategies for enhancing their catalytic performance are systematically summarized,such as heterointerface engineering,heteroatom doping,metal-nonmetal-metal bridging architectures,and single-atom site design.Finally,current challenges and future research directions are discussed,aiming to provide insightful perspectives for the rational design of high-performance electrocatalysts for OWS.
基金Supported by the National Natural Science Foundation of China(12071133)Natural Science Foundation of Henan Province(252300421993)Key Scientific Research Project of Higher Education Institutions in Henan Province(25B110005)。
文摘In this paper,an adaptive cubic regularisation algorithm based on affine scaling methods(ARCBASM)is proposed for solving nonlinear equality constrained programming with nonnegative constraints on variables.From the optimality conditions of the problem,we introduce appropriate affine matrix and construct an affine scaling ARC subproblem with linearized constraints.Composite step methods and reduced Hessian methods are applied to tackle the linearized constraints.As a result,a standard unconstrained ARC subproblem is deduced and its solution can supply sufficient decrease.The fraction to the boundary rule maintains the strict feasibility(for nonnegative constraints on variables)of every iteration point.Reflection techniques are employed to prevent the iterations from approaching zero too early.Under mild assumptions,global convergence of the algorithm is analysed.Preliminary numerical results are reported.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
文摘Aiming to solve the steering instability and hysteresis of agricultural robots in the process of movement,a fusion PID control method of particle swarm optimization(PSO)and genetic algorithm(GA)was proposed.The fusion algorithm took advantage of the fast optimization ability of PSO to optimize the population screening link of GA.The Simulink simulation results showed that the convergence of the fitness function of the fusion algorithm was accelerated,the system response adjustment time was reduced,and the overshoot was almost zero.Then the algorithm was applied to the steering test of agricultural robot in various scenes.After modeling the steering system of agricultural robot,the steering test results in the unloaded suspended state showed that the PID control based on fusion algorithm reduced the rise time,response adjustment time and overshoot of the system,and improved the response speed and stability of the system,compared with the artificial trial and error PID control and the PID control based on GA.The actual road steering test results showed that the PID control response rise time based on the fusion algorithm was the shortest,about 4.43 s.When the target pulse number was set to 100,the actual mean value in the steady-state regulation stage was about 102.9,which was the closest to the target value among the three control methods,and the overshoot was reduced at the same time.The steering test results under various scene states showed that the PID control based on the proposed fusion algorithm had good anti-interference ability,it can adapt to the changes of environment and load and improve the performance of the control system.It was effective in the steering control of agricultural robot.This method can provide a reference for the precise steering control of other robots.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金Supported by National Natural Science Foundation of China(Grant No.62506054)Natural Science Foundation of Chongqing,China(Grant Nos.CSTB2022NSCQ-MSX1571,CSTB2024NSCQ-MSX1118)+2 种基金the Science and Technology Research Program of Chongqing Municipal Education Commission(Grant Nos.KJQN202400841,KJZD-M202500804)The National Natural Science Foundation of China(Grant No.61976030)Chongqing Technology and Business University High-level Talent Research Initiation Project(Grant No.2256004).
文摘Metaheuristic algorithms,renowned for strong global search capabilities,are effective tools for solving complex optimization problems and show substantial potential in e-Health applications.This review provides a systematic overview of recent advancements in metaheuristic algorithms and highlights their applications in e-Health.We selected representative algorithms published between 2019 and 2024,and quantified their influence using an entropy-weighted method based on journal impact factors and citation counts.CThe Harris Hawks Optimizer(HHO)demonstrated the highest early citation impact.The study also examined applications in disease prediction models,clinical decision support,and intelligent health monitoring.Notably,the Chaotic Salp Swarm Algorithm(CSSA)achieved 99.69% accuracy in detecting Novel Coronavirus Pneumonia.Future research should progress in three directions:improving theoretical reliability and performance predictability in medical contexts;designing more adaptive and deployable mechanisms for real-world systems;and integrating ethical,privacy,and technological considerations to enable precision medicine,digital twins,and intelligent medical devices.
基金Supported by National Natural Science Foundation of China(Grant Nos.52202431,52172353).
文摘Based on the demands for crashworthiness and lightweight in the passive safety of transportation vehicles,metal-fiber reinforced polymer(FRP)hybrid thin-walled tubes(MFHTWTs)integrate the toughness,strength and lightweight of two distinct material characteristics.MFHTWTs can achieve energy absorption through the coupling of material plastic deformation and fracture,demonstrating significant engineering value in passive safety.This review provides a comprehensive examination of the crashworthiness topology optimization of MFHTWTs,aiming to demonstrate that a deeply integrated approach combining topology and parameter opti-mization can realize an optimal design method for MFHTWTs,thereby maximizing the functional utilization of limited material.Firstly,the review highlights the crashworthiness topology optimization methods(CTOMs)based on thin-walled structures.With a particular focus on metal,the review discusses both the practical ap-plicability and limitations of CTOMs under crash conditions.Additionally,based on the methodology of the equivalent static load method(ESLM),the review emphasizes that topology optimization methods considering continuous fiber paths and multi-material interface connections are also applicable to the crashworthiness op-timization of MFHTWTs.Furthermore,to couple structural parameters and configuration characteristics,in-tegrated topology optimization methods,including parameter optimization,are proposed to provide a valuable reference for the global optimization of MFHTWTs.Thus,these methods can establish the mapping relationship between key parameters and the structural energy absorption capacity.
文摘Optimizing convolutional neural networks(CNNs)for IoT attack detection remains a critical yet challenging task due to the need to balance multiple performance metrics beyond mere accuracy.This study proposes a unified and flexible optimization framework that leverages metaheuristic algorithms to automatically optimize CNN configurations for IoT attack detection.Unlike conventional single-objective approaches,the proposed method formulates a global multi-objective fitness function that integrates accuracy,precision,recall,and model size(speed/model complexity penalty)with adjustable weights.This design enables both single-objective and weightedsum multi-objective optimization,allowing adaptive selection of optimal CNN configurations for diverse deployment requirements.Two representativemetaheuristic algorithms,GeneticAlgorithm(GA)and Particle Swarm Optimization(PSO),are employed to optimize CNNhyperparameters and structure.At each generation/iteration,the best configuration is selected as themost balanced solution across optimization objectives,i.e.,the one achieving themaximum value of the global objective function.Experimental validation on two benchmark datasets,Edge-IIoT and CIC-IoT2023,demonstrates that the proposed GA-and PSO-based models significantly enhance detection accuracy(94.8%–98.3%)and generalization compared with manually tuned CNN configurations,while maintaining compact architectures.The results confirm that the multi-objective framework effectively balances predictive performance and computational efficiency.This work establishes a generalizable and adaptive optimization strategy for deep learning-based IoT attack detection and provides a foundation for future hybrid metaheuristic extensions in broader IoT security applications.
基金appreciation to the Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R384)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘The cloud-fog computing paradigm has emerged as a novel hybrid computing model that integrates computational resources at both fog nodes and cloud servers to address the challenges posed by dynamic and heterogeneous computing networks.Finding an optimal computational resource for task offloading and then executing efficiently is a critical issue to achieve a trade-off between energy consumption and transmission delay.In this network,the task processed at fog nodes reduces transmission delay.Still,it increases energy consumption,while routing tasks to the cloud server saves energy at the cost of higher communication delay.Moreover,the order in which offloaded tasks are executed affects the system’s efficiency.For instance,executing lower-priority tasks before higher-priority jobs can disturb the reliability and stability of the system.Therefore,an efficient strategy of optimal computation offloading and task scheduling is required for operational efficacy.In this paper,we introduced a multi-objective and enhanced version of Cheeta Optimizer(CO),namely(MoECO),to jointly optimize the computation offloading and task scheduling in cloud-fog networks to minimize two competing objectives,i.e.,energy consumption and communication delay.MoECO first assigns tasks to the optimal computational nodes and then the allocated tasks are scheduled for processing based on the task priority.The mathematical modelling of CO needs improvement in computation time and convergence speed.Therefore,MoECO is proposed to increase the search capability of agents by controlling the search strategy based on a leader’s location.The adaptive step length operator is adjusted to diversify the solution and thus improves the exploration phase,i.e.,global search strategy.Consequently,this prevents the algorithm from getting trapped in the local optimal solution.Moreover,the interaction factor during the exploitation phase is also adjusted based on the location of the prey instead of the adjacent Cheetah.This increases the exploitation capability of agents,i.e.,local search capability.Furthermore,MoECO employs a multi-objective Pareto-optimal front to simultaneously minimize designated objectives.Comprehensive simulations in MATLAB demonstrate that the proposed algorithm obtains multiple solutions via a Pareto-optimal front and achieves an efficient trade-off between optimization objectives compared to baseline methods.
基金supported by the National Natural Science Foundation of China(No.12202295)the International(Regional)Cooperation and Exchange Projects of the National Natural Science Foundation of China(No.W2421002)+2 种基金the Sichuan Science and Technology Program(No.2025ZNSFSC0845)Zhejiang Provincial Natural Science Foundation of China(No.ZCLZ24A0201)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.GK249909299001-004)。
文摘Deployable Composite Thin-Walled Structures(DCTWS)are widely used in space applications due to their ability to compactly fold and self-deploy in orbit,enabled by cutouts.Cutout design is crucial for balancing structural rigidity and flexibility,ensuring material integrity during large deformations,and providing adequate load-bearing capacity and stability once deployed.Most research has focused on optimizing cutout size and shape,while topology optimization offers a broader design space.However,the anisotropic properties of woven composite laminates,complex failure criteria,and multi-performance optimization needs have limited the exploration of topology optimization in this field.This work derives the sensitivities of bending stiffness,critical buckling load,and the failure index of woven composite materials with respect to element density,and formulates both single-objective and multi-objective topology optimization models using a linear weighted aggregation approach.The developed method was integrated with the commercial finite element software ABAQUS via a Python script,allowing efficient application to cutout design in various DCTWS configurations to maximize bending stiffness and critical buckling load under material failure constraints.Optimization of a classical tubular hinge resulted in improvements of 107.7%in bending stiffness and 420.5%in critical buckling load compared to level-set topology optimization results reported in the literature,validating the effectiveness of the approach.To facilitate future research and encourage the broader adoption of topology optimization techniques in DCTWS design,the source code for this work is made publicly available via a Git Hub link:https://github.com/jinhao-ok1/Topo-for-DCTWS.git.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFB3710805).
文摘Ultra-high-strength aluminumalloy profile is an ideal choice for aerospace structuralmaterials due to its excellent specific strength and corrosion resistance.However,issues such as uneven metal flow,stress concentration,and forming defects are prone to occur during their extrusion.This study focuses on an Al-Zn-Mg-Cu ultra-high-strength aluminum alloy profile with a double-U,multi-cavity thin-walled structure.Firstly,hot compression experiments were conducted at temperatures of 350○C,400○C,and 450○C,with strain rates of 0.01 and 1.0 s^(−1),to investigate the plastic deformation behavior of the material.Subsequently,a 3D coupled thermo-mechanical extrusion simulation model was established using Deform-3D to systematically analyze the influence of die structure and process parameters on metal flow velocity,effective stress/strain,and temperature distribution.The simulation revealed significant velocity differences,stress concentration,and uneven temperature distribution.Key parameters,including mesh density,extrusion ratio,die fillet,and bearing length,were optimized through full-factorial experiments.This optimization,combined with a stepped flow-guiding die design,effectively improved the metal flow pattern during extrusion.Trial production based on both the initial and optimized parameters were carried out.A comparative analysis demonstrates that the optimized scheme results in a final profile whose cross-section matches the target design closely,with complete filling of complex features and no obvious forming defects.This research provides a valuable reference for the extrusion process optimization and die design of complex-section profiles made from ultra-high-strength aluminum alloys.
基金Supported by Natural Science Foundation of Henan Province(Grant Nos.232300421218 and 252300421483).
文摘The airplane refueling problem can be stated as follows.We are given n airplanes which can refuel one another during the flight.Each airplane has a reservoir volume wj(liters)and a consumption rate pj(liters per kilometer).As soon as one airplane runs out of fuel,it is dropping out of the flight.The problem asks for finding a refueling scheme such that the last plane in the air reach a maximal distance.An equivalent version is the n-vehicle exploration problem.The computational complexity of this non-linear combinatorial optimization problem is open so far.This paper employs the neighborhood exchange method of single-machine scheduling to study the precedence relations of jobs,so as to improve the necessary and sufficiency conditions of optimal solutions,and establish an efficient heuristic algorithm which is a generalization of several existing special algorithms.
基金funded by the Key Laboratory of Geological Safety of Coastal Urban Underground Space,Ministry of Natural Resources of China(Grant No.BHKF2022Y02)Natural Science Foundation of Guangdong Province,China(Grant No.2024A1515011162)Natural Science Foundation of Shandong Province,China(Grant No.ZR2024QE021).
文摘Traditional mining in open pit mines often uses explosives,leading to environmental hazards,with flyrock being a critical issue.In detail,excess flying rock beyond the designated explosion area was identified as the primary cause of fatal and non-fatal blasting hazards in open pit mining.Therefore,the accurate and reliable prediction of flyrock becomes crucial for effectively managing and mitigating associated problems.This study used the Light Gradient Boosting Machine(LightGBM)model to predict flyrock in a lead-zinc mine,with promising results.To improve its accuracy,multi-verse optimizer(MVO)and ant lion optimizer(ALO)metaheuristic algorithms were introduced.Results showed MVO-LightGBM outperformed conventional LightGBM.Additionally,decision tree(DT),support vector machine(SVM),and classification and regression tree(CART)models were trained and compared with MVO-LightGBM.The MVO-LightGBM model excelled over DT,SVM,and CART.This study highlights MVO-LightGBM's effectiveness and potential for broader applications.Furthermore,a multiple parametric sensitivity analysis(MPSA)algorithm was employed to specify the sensitivity of parameters.MPSA results indicated that the highest and lowest sensitivities are relevant to blasted rock per hole and spacing with theγ=1752.12 andγ=49.52,respectively.
基金funded by the Malaysian Ministry of Higher Education through the Fundamental Research Grant Scheme(FRGS/1/2024/ICT02/UCSI/02/1).
文摘Accurate estimation of photovoltaic(PV)parameters is essential for optimizing solar module perfor-mance and enhancing resource efficiency in renewable energy systems.This study presents a process innovation by introducing,for the first time,the Triangulation Topology Aggregation Optimizer(TTAO)integrated with parallel computing to address PV parameter estimation challenges.The effectiveness and robustness of TTAO are rigorously evaluated using two standard benchmark datasets(KC200GT and R.T.C.France solar cells)and a real-world dataset(Poly70W solar module)under single-,double-,and triple-diode configurations.Results show that TTAO consistently achieves superior accuracy by producing the lowest RMSE values and faster convergence compared to state-of-the-art metaheuristic algorithms.In addition,the integration of parallel computing significantly enhances computational efficiency,reducing execution time by up to 85%without compromising accuracy.Validation using real-world data further demonstrates TTAO’s adaptability and practical relevance in renewable energy systems,effectively bridging the gap between theoretical modeling and real-world implementation for PV system monitoring and optimization,contributing to climate mitigation through improved solar energy performance.
基金co-supported by the National Natural Science Foundation of China(Nos.62473110,62403166)the Fundamental Research Funds for the Central Universities,China(No.2023FRFK02043)+1 种基金the Natural Science Foundation of Heilongjiang Province,China(No.LH2022F023)the National Key Laboratory of Space Intelligent Control Foundation,China(No.2023-JCJQ-LB-006-19)。
文摘With the increasing number of geosynchronous orbit satellites with expiring lifetime,spacecraft refueling is crucial in enhancing the economic benefits of on-orbit services.The existing studies tend to be based on predetermined refueling duration;however,the precise mission scheduling solution will be difficult to apply due to uncertain refueling duration caused by orbital transfer deviations and stochastic actuator faults during actual on-orbit service.Therefore,this paper proposes a robust mission scheduling strategy for geosynchronous orbit spacecraft on-orbit refueling missions with uncertain refueling duration.Firstly,a robust mission scheduling model is constructed by introducing the budget uncertainty set to describe the uncertain refueling duration.Secondly,a hybrid harris hawks optimization algorithm is designed to explore the optimal mission allocation and refueling sequences,which combines cubic chaotic mapping to initialize the population,and the crossover in the genetic algorithm is introduced to enhance global convergence.Finally,the typical simulation examples are constructed with real-mission scenarios in three aspects to analyze:performance comparisons with various algorithms;robustness analyses via comparisons of different on-orbit refueling durations;investigations into the impacts of different initial population strategies on algorithm performance,demonstrating the proposed mission scheduling framework's robustness and effectiveness by comparing it with the exact mission scheduling.
基金funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2025R442)Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘Accurate parameter extraction of photovoltaic(PV)models plays a critical role in enabling precise performance prediction,optimal system sizing,and effective operational control under diverse environmental conditions.While a wide range of metaheuristic optimisation techniques have been applied to this problem,many existing methods are hindered by slow convergence rates,susceptibility to premature stagnation,and reduced accuracy when applied to complex multi-diode PV configurations.These limitations can lead to suboptimal modelling,reducing the efficiency of PV system design and operation.In this work,we propose an enhanced hybrid optimisation approach,the modified Spider Wasp Optimization(mSWO)with Opposition-Based Learning algorithm,which integrates the exploration and exploitation capabilities of the Spider Wasp Optimization(SWO)metaheuristic with the diversityenhancing mechanism of Opposition-Based Learning(OBL).The hybridisation is designed to dynamically expand the search space coverage,avoid premature convergence,and improve both convergence speed and precision in highdimensional optimisation tasks.The mSWO algorithm is applied to three well-established PV configurations:the single diode model(SDM),the double diode model(DDM),and the triple diode model(TDM).Real experimental current-voltage(I-V)datasets from a commercial PV module under standard test conditions(STC)are used for evaluation.Comparative analysis is conducted against eighteen advanced metaheuristic algorithms,including BSDE,RLGBO,GWOCS,MFO,EO,TSA,and SCA.Performance metrics include minimum,mean,and maximum root mean square error(RMSE),standard deviation(SD),and convergence behaviour over 30 independent runs.The results reveal that mSWO consistently delivers superior accuracy and robustness across all PV models,achieving the lowest RMSE values of 0.000986022(SDM),0.000982884(DDM),and 0.000982529(TDM),with minimal SD values,indicating remarkable repeatability.Convergence analyses further show that mSWO reaches optimal solutions more rapidly and with fewer oscillations than all competing methods,with the performance gap widening as model complexity increases.These findings demonstrate that mSWO provides a scalable,computationally efficient,and highly reliable framework for PV parameter extraction.Its adaptability to models of growing complexity suggests strong potential for broader applications in renewable energy systems,including performance monitoring,fault detection,and intelligent control,thereby contributing to the optimisation of next-generation solar energy solutions.
基金supported by the National Natural Science Foundation of China under grant number 62066016the Natural Science Foundation of Hunan Province of China under grant number 2024JJ7395+2 种基金International and Regional Science and Technology Cooperation and Exchange Program of the Hunan Association for Science and Technology under grant number 025SKX-KJ-04Hunan Provincial Postgraduate Research Innovation Project under grant numberCX20251611Liye Qin Bamboo Slips Research Special Project of JishouUniversity 25LYY03.
文摘ThePigeon-InspiredOptimization(PIO)algorithmconstitutes ametaheuristic method derived fromthe homing behaviour of pigeons.Initially formulated for three-dimensional path planning in unmanned aerial vehicles(UAVs),the algorithmhas attracted considerable academic and industrial interest owing to its effective balance between exploration and exploitation,coupled with advantages in real-time performance and robustness.Nevertheless,as applications have diversified,limitations in convergence precision and a tendency toward premature convergence have become increasingly evident,highlighting a need for improvement.This reviewsystematically outlines the developmental trajectory of the PIO algorithm,with a particular focus on its core applications in UAV navigation,multi-objective formulations,and a spectrum of variantmodels that have emerged in recent years.It offers a structured analysis of the foundational principles underlying the PIO.It conducts a comparative assessment of various performance-enhanced versions,including hybrid models that integrate mechanisms from other optimization paradigms.Additionally,the strengths andweaknesses of distinct PIOvariants are critically examined frommultiple perspectives,including intrinsic algorithmic characteristics,suitability for specific application scenarios,objective function design,and the rigor of the statistical evaluation methodologies employed in empirical studies.Finally,this paper identifies principal challenges within current PIO research and proposes several prospective research directions.Future work should focus on mitigating premature convergence by refining the two-phase search structure and adjusting the exponential decrease of individual numbers during the landmark operator.Enhancing parameter adaptation strategies,potentially using reinforcement learning for dynamic tuning,and advancing theoretical analyses on convergence and complexity are also critical.Further applications should be explored in constrained path planning,Neural Architecture Search(NAS),and other real-worldmulti-objective problems.For Multi-objective PIO(MPIO),key improvements include controlling the growth of the external archive and designing more effective selection mechanisms to maintain convergence efficiency.These efforts are expected to strengthen both the theoretical foundation and practical versatility of PIO and its variants.
文摘The goal of the present work is to demonstrate the potential of Artificial Neural Network(ANN)-driven Genetic Algorithm(GA)methods for energy efficiency and economic performance optimization of energy efficiency measures in a multi-family house building in Greece.The energy efficiency measures include different heating/cooling systems(such as low-temperature and high-temperature heat pumps,natural gas boilers,split units),building envelope components for floor,walls,roof and windows of variable heat transfer coefficients,the installation of solar thermal collectors and PVs.The calculations of the building loads and investment and operating and maintenance costs of the measures are based on the methodology defined in Directive 2010/31/EU,while economic assumptions are based on EN 15459-1 standard.Typically,multi-objective optimization of energy efficiency measures often requires the simulation of very large numbers of cases involving numerous possible combinations,resulting in intense computational load.The results of the study indicate that ANN-driven GA methods can be used as an alternative,valuable tool for reliably predicting the optimal measures which minimize primary energy consumption and life cycle cost of the building with greatly reduced computational requirements.Through GA methods,the computational time needed for obtaining the optimal solutions is reduced by 96.4%-96.8%.
基金The National Natural Science Foundations of China (12202219)the Natural Science Foundations of Ningxia (2024AAC02009, 2023AAC05001)the Ningxia Youth Top Talents Training Project。
文摘The fast solution of linear equations has always been one of the hot spots in scientific computing.A kind of the diagonal matrix splitting iteration methods are provided,which is different from the classical matrix splitting methods.Taking the decomposition of the diagonal elements for coefficient matrix as the key point,some new preconditioners are constructed.Taking the tri-diagonal coefficient matrix as an example,the convergence domains and optimal relaxation factor of the new method are analyzed theoretically.The presented new iteration methods are applied to solve linear algebraic equations,even 2D and 3D diffusion problems with the fully implicit discretization.The results of numerical experiments are matched with the theoretical analysis,and show that the iteration numbers are reduced greatly.The superiorities of presented iteration methods exceed some classical iteration methods dramatically.
