The mathematical model of optimal placement of active members in truss adaptive structures is essentially a nonlinear multi-objective optimization problem with mixed variables. It is usually much difficult and costly ...The mathematical model of optimal placement of active members in truss adaptive structures is essentially a nonlinear multi-objective optimization problem with mixed variables. It is usually much difficult and costly to be solved. In this paper, the optimal location of active members is treated in terms of （0, 1） discrete variables. Structural member sizes, control gains, and （0, 1） placement variables are treated simultaneously as design variables. Then, a succinct and reasonable compromise scalar model, which is transformed from original multi-objective optimization, is established, in which the （0, 1） discrete variables are converted into an equality constraint. Secondly, by penalty function approach, the subsequent scalar mixed variable compromise model can be formulated equivalently as a sequence of continuous variable problems. Thirdly, for each continuous problem in the sequence, by choosing intermediate design variables and temporary critical constraints, the approximation concept is carried out to generate a sequence of explicit approximate problems which enhance the quality of the approximate design problems. Considering the proposed method, a FORTRAN program OPAMTAS2.0 for optimal placement of active members in truss adaptive structures is developed, which is used by the constrained variable metric method with the watchdog technique （CVMW method）. Finally, a typical 18 bar truss adaptive structure as test numerical examples is presented to illustrate that the design methodology set forth is simple, feasible, efficient and stable. The established scalar mixed variable compromise model that can avoid the ill-conditioned possibility caused by the different orders of magnitude of various objective functions in optimization process, therefore, it enables the optimization algorithm to have a good stability. On the other hand, the proposed novel optimization technique can make both discrete and continuous variables be optimized simultaneously.展开更多
The integration of distributed generations (DGs) into distribution systems (DSs) is increasingly becoming a solution for compensating for isolated local energy systems (ILESs). Additionally, distributed generations ar...The integration of distributed generations (DGs) into distribution systems (DSs) is increasingly becoming a solution for compensating for isolated local energy systems (ILESs). Additionally, distributed generations are used for self-consumption with excess energy injected into centralized grids (CGs). However, the improper sizing of renewable energy systems (RESs) exposes the entire system to power losses. This work presents an optimization of a system consisting of distributed generations. Firstly, PSO algorithms evaluate the size of the entire system on the IEEE bus 14 test standard. Secondly, the size of the system is allocated using improved Particles Swarm Optimization (IPSO). The convergence speed of the objective function enables a conjecture to be made about the robustness of the proposed system. The power and voltage profile on the IEEE 14-bus standard displays a decrease in power losses and an appropriate response to energy demands (EDs), validating the proposed method.展开更多
A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures.The study includes development of a statistical criterion,formulati...A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures.The study includes development of a statistical criterion,formulation of a general optimization problem and establishment of a solution procedure.Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location.This study shows that the proposed method for the optimal device application is simple and general,and that the optimally applied dampers and actuators are very efficient for seismic response reduction.展开更多
Power loss and voltage uncertainty are the major issues prevalently faced in the design of distribution systems.But such issues can be resolved through effective usage of networking reconfiguration that has a combinat...Power loss and voltage uncertainty are the major issues prevalently faced in the design of distribution systems.But such issues can be resolved through effective usage of networking reconfiguration that has a combination of Distributed Generation(DG)units from distribution networks.In this point of view,optimal placement and sizing of DGs are effective ways to boost the performance of power systems.The optimum allocation of DGs resolves various problems namely,power loss,voltage profile improvement,enhanced reliability,system stability,and performance.Several research works have been conducted to address the distribution system problems in terms of power loss,energy loss,voltage profile,and voltage stability depending upon optimal DG distribution.With this motivation,the current study designs a Chaotic Artificial Flora Optimization based on Optimal Placement and Sizing of DGs(CAFO-OPSDG)to enhance the voltage profiles and mitigate the power loss.Besides,the CAFO algorithm is derived from the incorporation of chaos theory concept into conventional artificial flora optimization AFO algorithm with an aim to enhance the global optimization abilities.The fitness function of CAFO-OPSDG algorithm involves voltage regulation,power loss minimization,and penalty cost.To consider the actual power system scenario,the penalty factor acts as an important element not only to minimize the total power loss but to increase the voltage profiles as well.The experimental validation of the CAFO-OPSDG algorithm was conducted against IEEE 33 Bus system and IEEE 69 Bus system.The outcomes were examined under various test scenarios.The results of the experiment established that the presented CAFO-OPSDG model is effective in terms of reducing the power loss and voltage deviation and boost-up the voltage profile for the specified system.展开更多
The oscillation of large space structure(LSS)can be easily induced because of its low vibration frequency.The coupling effect between LSS vibration control and attitude control can significantly reduce the overall per...The oscillation of large space structure(LSS)can be easily induced because of its low vibration frequency.The coupling effect between LSS vibration control and attitude control can significantly reduce the overall performance of the control system,especially when the scale of flexible structure increases.This paper proposes an optimal placement method of piezoelectric stack actuators(PSAs)network which reduces the coupling effect between attitude and vibration control system.First,a spacecraft with a honeycomb-shaped telescope is designed for a resolution-critical imaging scenario.The coupling dynamics of the spacecraft is established using finite element method(FEM)and floating frame of reference formulation(FFRF).Second,a coupling-effect-reducing optimal placement criterion for PSAs based on coupling-matrix enhanced Gramian is designed to reduce the coupling effect excitation while balancing controllability.Additionally,a laddered multi-layered optimizing scheme is established to increase the speed and accuracy when solving the gigantic discrete optimization problem.Finally,the effectiveness of the proposed method is illustrated through numerical simulation.展开更多
The increase in bridge structure span and the complex stress characteristics directly affect the optimization of sensor placement,which in turn influences the data acquisition performance of the monitoring system.The ...The increase in bridge structure span and the complex stress characteristics directly affect the optimization of sensor placement,which in turn influences the data acquisition performance of the monitoring system.The key to the information acquisition of a bridge monitoring system is to obtain data that meets the health monitoring requirements of the bridge with a limited number of measurement points.To address this,a hybrid method based on multiple optimization criteria is proposed for optimal sensor placement(OSP).First,the minimum number of modes required for bridge monitoring is determined using the information entropy criterion(IE).Then,the number of measurement points is determined using a sequence method combined with the modal assurance criterion(MAC).Finally,the sensor placement is optimized using the generalized genetic algorithm(GGA)combined with double-structure encoding,and the optimization results are validated through finite element model analysis.The research results show that the hybrid method based on multiple optimization criteria can effectively determine the number of measurement points for bridge structures and optimize sensor placement,with a significant improvement in computational speed.展开更多
A novel planning tool for optimizing the placement of electric springs(ESs)in unbalanced distribution networks is introduced in this study.The total voltage deviation is used as the optimization criterion and is calcu...A novel planning tool for optimizing the placement of electric springs(ESs)in unbalanced distribution networks is introduced in this study.The total voltage deviation is used as the optimization criterion and is calculated when the ESs operate at their maximum reactive power either in the inductive or capacitive modes.The power rating of the ES is adjusted on the basis of the available active power at the bus.And in the optimization problem,it is expressed as the power ratio of the noncritical load(NCL)and critical load(CL).The implemented ES model is flexible,which can be used on any bus and any phase.The model determines the output voltage from the parameters and operating conditions at the point of common coupling(PCC).These conditions are integrated using the backward/forward sweep method(BFSM)and are updated during power flow calculations.The problem is described as a mixed-integer nonlinear problem and solved efficiently using an improved BFSM-based genetic algorithm,which computes power flow and ES placement simultaneously.The effectiveness of this method is evaluated through testing in IEEE 13-bus and 34-bus systems.展开更多
Conventional optimal sensor placement(OSP)methods employ the premise that all sensors work perfectly during long-term structural monitoring.However,this premise is often difficult to fulfill in real applications due t...Conventional optimal sensor placement(OSP)methods employ the premise that all sensors work perfectly during long-term structural monitoring.However,this premise is often difficult to fulfill in real applications due to poor manufacturing and material aging of sensors,human damage,and electromagnetic interference.This paper presents a robustness-oriented OSP method that considers sensor failures.The OSP problem is designed with consideration of sensor failures to ensure that both complete vibration data collected by all sensors and incomplete vibration data caused by individual sensor failures can accurately identify structural modal parameters.A dispersion-aggregation firefly algorithm(DAFA),which is derived from the basic firefly algorithm,has been proposed to solve this complicated optimization problem.The dispersion and aggregation operators are designed to prevent falling into local optima and to rapidly converge to the global optima.The proposed methodology is confirmed by extracting the robust sensor configuration for a long-span cable-stayed bridge.The robustness of the optimal sensor configurations against sensor failure is thoroughly explored,and the performance of the proposed DAFA is extensively examined.展开更多
This paper deals with the optimal placement of distributed generation(DG) units in distribution systems via an enhanced multi-objective particle swarm optimization(EMOPSO) algorithm. To pursue a better simulation of t...This paper deals with the optimal placement of distributed generation(DG) units in distribution systems via an enhanced multi-objective particle swarm optimization(EMOPSO) algorithm. To pursue a better simulation of the reality and provide the designer with diverse alternative options, a multi-objective optimization model with technical and operational constraints is constructed to minimize the total power loss and the voltage fluctuation of the power system simultaneously. To enhance the convergence of MOPSO, special techniques including a dynamic inertia weight and acceleration coefficients have been integrated as well as a mutation operator. Besides, to promote the diversity of Pareto-optimal solutions, an improved non-dominated crowding distance sorting technique has been introduced and applied to the selection of particles for the next iteration. After verifying its effectiveness and competitiveness with a set of well-known benchmark functions, the EMOPSO algorithm is employed to achieve the optimal placement of DG units in the IEEE 33-bus system. Simulation results indicate that the EMOPSO algorithm enables the identification of a set of Pareto-optimal solutions with good tradeoff between power loss and voltage stability. Compared with other representative methods, the present results reveal the advantages of optimizing capacities and locations of DG units simultaneously, and exemplify the validity of the EMOPSO algorithm applied for optimally placing DG units.展开更多
The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem. Field testi...The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem. Field testing is an important method for research on dynamic identification and vibration mechanisms. Research on optimal sensor placement has become a very important topic due to the need to obtain effective testing information from limited test resources. To overcome inadequacies of the present methods, this paper puts forward the triaxial effective independence driving-point residue （EfI3-DPR3） method for optimal sensor placement. The Efl3-DPR3 method can incorporate both the maximum triaxial modal kinetic energy and linear independence of the triaxial target modes at the selected nodes. It was applied to the optimal placement oftriaxial sensors for vibration testing in a hydropower house, and satisfactory results were obtained. This method can provide some guidance for optimal placement of triaxial sensors of underground powerhouses.展开更多
The distribution of measurement noise is usually assumed to be Gaussian in the optimal phasor measurement unit(PMU)placement(OPP)problem.However,this is not always accurate in practice.This paper proposes a new OPP me...The distribution of measurement noise is usually assumed to be Gaussian in the optimal phasor measurement unit(PMU)placement(OPP)problem.However,this is not always accurate in practice.This paper proposes a new OPP method for smart grids in which the effects of conventional measurements,limited channels of PMUs,zero-injection buses(ZIBs),single PMU loss contingency,state estimation error(SEE),and the maximum SEE variance(MSEEV)are considered.The SEE and MSEEV are both obtained using a robust t-distribution maximum likelihood estimator(MLE)because t-distribution is more flexible for modeling both Gaussian and non-Gaussian noises.The A-and G-optimal experimental criteria are utilized to form the SEE and MSEEV constraints.This allows the optimization problem to be converted into a linear objective function subject to linear matrix inequality observability constraints.The performance of the proposed OPP method is verified by the simulations of the IEEE 14-bus,30-bus,and 118-bus systems as well as the 211-bus practical distribution system in China.展开更多
The problem of optimal placement and sizing(OPS) of renewable distributed generation(RDG) is followed by numerous technical, economical, geographical, and ecological constraints. In this paper, it is investigated from...The problem of optimal placement and sizing(OPS) of renewable distributed generation(RDG) is followed by numerous technical, economical, geographical, and ecological constraints. In this paper, it is investigated from two viewpoints, namely the simultaneous minimization of total energy loss of a distribution network and the maximization of profit for RDG owner. The stochastic nature of RDG such as the wind turbine and photovoltaic generation is accounted using suitable probabilistic models. To solve this problem, a hybrid metaheuristic algorithm is proposed, which is a combination of the phasor particle swarm optimization and the gravitational search algorithm. The proposed algorithm is tested on an IEEE69-bus system for several cases in two scenarios. The results obtained by the hybrid algorithm shows that it provides high-quality solution for all cases considered and has better performances for solving the OPS problem compared to other metaheuristic population-based techniques.展开更多
To achieve optimal configuration of switching devices in a power distribution system,this paper proposes a repulsive firefly algorithm-based optimal switching device placement method.In this method,the influence of te...To achieve optimal configuration of switching devices in a power distribution system,this paper proposes a repulsive firefly algorithm-based optimal switching device placement method.In this method,the influence of territorial repulsion during firefly courtship is considered.The algorithm is practically applied to optimize the position and quantity of switching devices,while avoiding its convergence to the local optimal solution.The experimental simulation results have showed that the proposed repulsive firefly algorithm is feasible and effective,with satisfying global search capability and convergence speed,holding potential applications in setting value calculation of relay protection and distribution network automation control.展开更多
Most wind turbines within wind farms are set up to face a pre-determined wind direction.However,wind directions are intermittent in nature,leading to less electricity production capacity.This paper proposes an algorit...Most wind turbines within wind farms are set up to face a pre-determined wind direction.However,wind directions are intermittent in nature,leading to less electricity production capacity.This paper proposes an algorithm to solve the wind farm layout optimization problem considering multi-angular(MA)wind direction with the aim of maximizing the total power generated on wind farms and minimizing the cost of installation.A twostage genetic algorithm(GA)equipped with complementary sampling and uniform crossover is used to evolve a MA layout that will yield optimal output regardless of the wind direction.In the first stage,the optimal wind turbine layouts for 8 different major wind directions were determined while the second stage allows each of the previously determined layouts to compete and inter-breed so as to evolve an optimal MA wind farm layout.The proposed MA wind farm layout is thereafter compared to other layouts whose turbines have focused site specific wind turbine orientation.The results reveal that the proposed wind farm layout improves wind power production capacity with minimum cost of installation compared to the layouts with site specific wind turbine layouts.This paper will find application at the planning stage of wind farm.展开更多
This study deals with a robot manipulator for yarn bobbin handling in the cotton yarns lattice distortion modification system.The aim is to achieve an operation of yarn bobbin handling with minimal execution time,ener...This study deals with a robot manipulator for yarn bobbin handling in the cotton yarns lattice distortion modification system.The aim is to achieve an operation of yarn bobbin handling with minimal execution time,energy consumption and jerk in motion together.The placement of the robot,in relation to the yarn bobbin stations,is also optimized in conjunction of trajectory optimization.Three possible techniques for building the handling traj'ectory were considered:the quaternion spherical linear interpolation in Cartesian space,the quintic polynomial spline and quintic B-spline in joint space.The genetic algorithm(GA) was used to optimize the trajectories of the robot,with a penalty function to handle nonlinear constraints associated in the robot motion.Two simulations of the optimal trajectory in joint space and the placement of robot were carried out and the results obtained were presented and discussed.It is concluded that the quintic polynomial spline constructs a better trajectory in joint space and the proper placement of robot makes better performance.展开更多
Road Side Units(RSUs)are the essential component of vehicular communication for the objective of improving safety and mobility in the road transportation.RSUs are generally deployed at the roadside and more specifical...Road Side Units(RSUs)are the essential component of vehicular communication for the objective of improving safety and mobility in the road transportation.RSUs are generally deployed at the roadside and more specifically at the intersections in order to collect traffic information from the vehicles and disseminate alarms and messages in emergency situations to the neighborhood vehicles cooperating with the network.However,the development of a predominant RSUs placement algorithm for ensuring competent communication in VANETs is a challenging issue due to the hindrance of obstacles like water bodies,trees and buildings.In this paper,Ruppert’s Delaunay Triangulation Refinement Scheme(RDTRS)for optimal RSUs placement is proposed for accurately estimating the optimal number of RSUs that has the possibility of enhancing the area of coverage during data communication.This RDTRS is proposed by considering the maximum number of factors such as global coverage,intersection popularity,vehicle density and obstacles present in the map for optimal RSUs placement,which is considered as the core improvement over the existing RSUs optimal placement strategies.It is contributed for deploying requisite RSUs with essential transmission range for maximal coverage in the convex map such that each position of the map could be effectively covered by at least one RSU in the presence of obstacles.The simulation experiments of the proposed RDTRS are conducted with complex road traffic environments.The results of this proposed RDTRS confirmed its predominance in reducing the end-to-end delay by 21.32%,packet loss by 9.38%with improved packet delivery rate of 10.68%,compared to the benchmarked schemes.展开更多
A methodology, termed estimation error minimization(EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing...A methodology, termed estimation error minimization(EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing the limited sensor measurements, the entire structure response can be estimated based on the system equivalent reduction-expansion process(SEREP) method. In order to compare the capability of capturing the structural vibration response with other optimal sensor placement(OSP) methods, the effective independence(EI) method, modal kinetic energy(MKE) method and modal assurance criterion(MAC) method, were also investigated. A statistical criterion, root mean square error(RMSE), was employed to assess the magnitude of the estimation error between the real response and the estimated response. For investigating the effectiveness and accuracy of the above OSP methods, a 31-bar truss structure is introduced as a simulation example. The analysis results show that both the maximum and mean of the RMSE value obtained from the EEM method are smaller than those from other OSP methods, which indicates that the optimal sensor configuration obtained from the EEM method can provide a more accurate estimation of the entire structure response compared with the EI, MKE and MAC methods.展开更多
Normally, the power system observation is carried out for the optimal PMUs placement with minimum use of unit in the region of the Smart power grid system. By advanced tool, the process of protection and management of...Normally, the power system observation is carried out for the optimal PMUs placement with minimum use of unit in the region of the Smart power grid system. By advanced tool, the process of protection and management of the power system is considered with the measurement of time-synchronized of the voltage and current. In order to have an efficient placement solution for the issue, a novel method is needed with the optimal approach. For complete power network observability of PMU optimal placement a new method is implemented. However, the process of placement and connection of the buses is considered at various places with the same cost of installation. GA based Enhanced Harmony and Binary Search Algorithm (GA-EHBSA) is proposed and utilized with the improvement to have least PMU placement and better optimization approach for finding the optimal location. To evaluate the optimal placement of PMUs the proposed approach is implemented in the standard test systems of IEEE 14-bus, IEEE 24-bus, IEEE 30-bus, IEEE 39-bus and IEEE 57-bus. The simulation results are evaluated and compared with existing algorithm to show the efficient process of optimal PMUs placement with better optimization, minimum cost and redundancy than the existing.展开更多
Placement optimization is a crucial phase in chip design,involving the strategic arrangement of cells within a limited region to enhance space utilization and reduce wirelength.Chip design enterprises need to optimize...Placement optimization is a crucial phase in chip design,involving the strategic arrangement of cells within a limited region to enhance space utilization and reduce wirelength.Chip design enterprises need to optimize the placement according to design rules to meet customer demands.While mixed-cell-height circuits are widely used in modern chip design,few studies have simultaneously considered the non-overlapping cells,rails alignment,and minimum implantation area constraints in the placement optimization problems.Hence,this study involves preprocessing the non-linear parts and developing a mixed-integer linear programming model to reduce the cost of legalizing chip placements for businesses.Furthermore,this study designs and implements an exact algorithm based on Benders decomposition,utilizing dual theory to obtain an optimal cut and iteratively solve for the coordinates of cells.Numerical experiments across various scales validate the performance of the algorithm.Through a detailed analysis of the shape of the chip region division,the proportion of different types of cells,the total number of cells and bins,and their impact on the placement,we derive some potentially useful design insights that can benefit chip design enterprises.展开更多
In this paper a new method has been proposed to decide optimal placement and best sizing of STATCOM （static synchronous compensator）. The best place of STATCOM is found using the sensitivity analysis and optimum siz...In this paper a new method has been proposed to decide optimal placement and best sizing of STATCOM （static synchronous compensator）. The best place of STATCOM is found using the sensitivity analysis and optimum sizing of STATCOM is managed using the genetic algorithm. The average model can account for the high-frequency effects and power electronic losses, and more accurately predict the active and reactive power outputs of the STATCOM. This paper employs the DIgSILENT simulator and DPL （DIgSILENT programming language） as a programming tool of the DIgSILENT to show the validity of the proposed method. The effectiveness of suggested approach has been tested on part of the distribution network of Iran, Khoramdarreh city in Zanjan province.展开更多
基金supported by National Natural Science Foundation of China(Grant No.10472007)
文摘The mathematical model of optimal placement of active members in truss adaptive structures is essentially a nonlinear multi-objective optimization problem with mixed variables. It is usually much difficult and costly to be solved. In this paper, the optimal location of active members is treated in terms of （0, 1） discrete variables. Structural member sizes, control gains, and （0, 1） placement variables are treated simultaneously as design variables. Then, a succinct and reasonable compromise scalar model, which is transformed from original multi-objective optimization, is established, in which the （0, 1） discrete variables are converted into an equality constraint. Secondly, by penalty function approach, the subsequent scalar mixed variable compromise model can be formulated equivalently as a sequence of continuous variable problems. Thirdly, for each continuous problem in the sequence, by choosing intermediate design variables and temporary critical constraints, the approximation concept is carried out to generate a sequence of explicit approximate problems which enhance the quality of the approximate design problems. Considering the proposed method, a FORTRAN program OPAMTAS2.0 for optimal placement of active members in truss adaptive structures is developed, which is used by the constrained variable metric method with the watchdog technique （CVMW method）. Finally, a typical 18 bar truss adaptive structure as test numerical examples is presented to illustrate that the design methodology set forth is simple, feasible, efficient and stable. The established scalar mixed variable compromise model that can avoid the ill-conditioned possibility caused by the different orders of magnitude of various objective functions in optimization process, therefore, it enables the optimization algorithm to have a good stability. On the other hand, the proposed novel optimization technique can make both discrete and continuous variables be optimized simultaneously.
文摘The integration of distributed generations (DGs) into distribution systems (DSs) is increasingly becoming a solution for compensating for isolated local energy systems (ILESs). Additionally, distributed generations are used for self-consumption with excess energy injected into centralized grids (CGs). However, the improper sizing of renewable energy systems (RESs) exposes the entire system to power losses. This work presents an optimization of a system consisting of distributed generations. Firstly, PSO algorithms evaluate the size of the entire system on the IEEE bus 14 test standard. Secondly, the size of the system is allocated using improved Particles Swarm Optimization (IPSO). The convergence speed of the objective function enables a conjecture to be made about the robustness of the proposed system. The power and voltage profile on the IEEE 14-bus standard displays a decrease in power losses and an appropriate response to energy demands (EDs), validating the proposed method.
基金the National Science Foundation under grant CMS 9903136
文摘A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures.The study includes development of a statistical criterion,formulation of a general optimization problem and establishment of a solution procedure.Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location.This study shows that the proposed method for the optimal device application is simple and general,and that the optimally applied dampers and actuators are very efficient for seismic response reduction.
文摘Power loss and voltage uncertainty are the major issues prevalently faced in the design of distribution systems.But such issues can be resolved through effective usage of networking reconfiguration that has a combination of Distributed Generation(DG)units from distribution networks.In this point of view,optimal placement and sizing of DGs are effective ways to boost the performance of power systems.The optimum allocation of DGs resolves various problems namely,power loss,voltage profile improvement,enhanced reliability,system stability,and performance.Several research works have been conducted to address the distribution system problems in terms of power loss,energy loss,voltage profile,and voltage stability depending upon optimal DG distribution.With this motivation,the current study designs a Chaotic Artificial Flora Optimization based on Optimal Placement and Sizing of DGs(CAFO-OPSDG)to enhance the voltage profiles and mitigate the power loss.Besides,the CAFO algorithm is derived from the incorporation of chaos theory concept into conventional artificial flora optimization AFO algorithm with an aim to enhance the global optimization abilities.The fitness function of CAFO-OPSDG algorithm involves voltage regulation,power loss minimization,and penalty cost.To consider the actual power system scenario,the penalty factor acts as an important element not only to minimize the total power loss but to increase the voltage profiles as well.The experimental validation of the CAFO-OPSDG algorithm was conducted against IEEE 33 Bus system and IEEE 69 Bus system.The outcomes were examined under various test scenarios.The results of the experiment established that the presented CAFO-OPSDG model is effective in terms of reducing the power loss and voltage deviation and boost-up the voltage profile for the specified system.
基金supported by National Natural Science Foundation of China(No.U23B6001).
文摘The oscillation of large space structure(LSS)can be easily induced because of its low vibration frequency.The coupling effect between LSS vibration control and attitude control can significantly reduce the overall performance of the control system,especially when the scale of flexible structure increases.This paper proposes an optimal placement method of piezoelectric stack actuators(PSAs)network which reduces the coupling effect between attitude and vibration control system.First,a spacecraft with a honeycomb-shaped telescope is designed for a resolution-critical imaging scenario.The coupling dynamics of the spacecraft is established using finite element method(FEM)and floating frame of reference formulation(FFRF).Second,a coupling-effect-reducing optimal placement criterion for PSAs based on coupling-matrix enhanced Gramian is designed to reduce the coupling effect excitation while balancing controllability.Additionally,a laddered multi-layered optimizing scheme is established to increase the speed and accuracy when solving the gigantic discrete optimization problem.Finally,the effectiveness of the proposed method is illustrated through numerical simulation.
文摘The increase in bridge structure span and the complex stress characteristics directly affect the optimization of sensor placement,which in turn influences the data acquisition performance of the monitoring system.The key to the information acquisition of a bridge monitoring system is to obtain data that meets the health monitoring requirements of the bridge with a limited number of measurement points.To address this,a hybrid method based on multiple optimization criteria is proposed for optimal sensor placement(OSP).First,the minimum number of modes required for bridge monitoring is determined using the information entropy criterion(IE).Then,the number of measurement points is determined using a sequence method combined with the modal assurance criterion(MAC).Finally,the sensor placement is optimized using the generalized genetic algorithm(GGA)combined with double-structure encoding,and the optimization results are validated through finite element model analysis.The research results show that the hybrid method based on multiple optimization criteria can effectively determine the number of measurement points for bridge structures and optimize sensor placement,with a significant improvement in computational speed.
基金supported by Consejo Nacional de Humanidades,Ciencia y Tecnología(CONAHCYT)—México(No.863547)the fellowship 2021-000001-01NACF-00604 given to the G.H.Valencia-Riverathe scholarships 175599,64698,253652,and 296574,given to G.Tapia-Tinoco,A.Garcia-Perez,D.Granados-Lieberman,and M.Valtierra-Rodriguez,respectively,through the Sistema Nacional de Investigadoras e Investigadores(SNII)-CONAHCYT-México.
文摘A novel planning tool for optimizing the placement of electric springs(ESs)in unbalanced distribution networks is introduced in this study.The total voltage deviation is used as the optimization criterion and is calculated when the ESs operate at their maximum reactive power either in the inductive or capacitive modes.The power rating of the ES is adjusted on the basis of the available active power at the bus.And in the optimization problem,it is expressed as the power ratio of the noncritical load(NCL)and critical load(CL).The implemented ES model is flexible,which can be used on any bus and any phase.The model determines the output voltage from the parameters and operating conditions at the point of common coupling(PCC).These conditions are integrated using the backward/forward sweep method(BFSM)and are updated during power flow calculations.The problem is described as a mixed-integer nonlinear problem and solved efficiently using an improved BFSM-based genetic algorithm,which computes power flow and ES placement simultaneously.The effectiveness of this method is evaluated through testing in IEEE 13-bus and 34-bus systems.
基金The National Natural Science Foundation of China(No.51978243,52578360).
文摘Conventional optimal sensor placement(OSP)methods employ the premise that all sensors work perfectly during long-term structural monitoring.However,this premise is often difficult to fulfill in real applications due to poor manufacturing and material aging of sensors,human damage,and electromagnetic interference.This paper presents a robustness-oriented OSP method that considers sensor failures.The OSP problem is designed with consideration of sensor failures to ensure that both complete vibration data collected by all sensors and incomplete vibration data caused by individual sensor failures can accurately identify structural modal parameters.A dispersion-aggregation firefly algorithm(DAFA),which is derived from the basic firefly algorithm,has been proposed to solve this complicated optimization problem.The dispersion and aggregation operators are designed to prevent falling into local optima and to rapidly converge to the global optima.The proposed methodology is confirmed by extracting the robust sensor configuration for a long-span cable-stayed bridge.The robustness of the optimal sensor configurations against sensor failure is thoroughly explored,and the performance of the proposed DAFA is extensively examined.
基金Project supported by the Science&Technology Innovation Team of Outstanding Youth of Hubei Provincial Universities(No.T201319)the Scientific Research Foundation for Talents of China Three Gorges University(No.0620130076)
文摘This paper deals with the optimal placement of distributed generation(DG) units in distribution systems via an enhanced multi-objective particle swarm optimization(EMOPSO) algorithm. To pursue a better simulation of the reality and provide the designer with diverse alternative options, a multi-objective optimization model with technical and operational constraints is constructed to minimize the total power loss and the voltage fluctuation of the power system simultaneously. To enhance the convergence of MOPSO, special techniques including a dynamic inertia weight and acceleration coefficients have been integrated as well as a mutation operator. Besides, to promote the diversity of Pareto-optimal solutions, an improved non-dominated crowding distance sorting technique has been introduced and applied to the selection of particles for the next iteration. After verifying its effectiveness and competitiveness with a set of well-known benchmark functions, the EMOPSO algorithm is employed to achieve the optimal placement of DG units in the IEEE 33-bus system. Simulation results indicate that the EMOPSO algorithm enables the identification of a set of Pareto-optimal solutions with good tradeoff between power loss and voltage stability. Compared with other representative methods, the present results reveal the advantages of optimizing capacities and locations of DG units simultaneously, and exemplify the validity of the EMOPSO algorithm applied for optimally placing DG units.
基金supported by the National Natural Science Foundation of China (Grant No. 50909072)the New Teachers' Fund for Doctor Station, the Ministry of Education of China (Grant No. 20090032120082)the Communication Research Item for the West Area, the Ministry of Communications of China (Grant No. 2009328000084)
文摘The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem. Field testing is an important method for research on dynamic identification and vibration mechanisms. Research on optimal sensor placement has become a very important topic due to the need to obtain effective testing information from limited test resources. To overcome inadequacies of the present methods, this paper puts forward the triaxial effective independence driving-point residue （EfI3-DPR3） method for optimal sensor placement. The Efl3-DPR3 method can incorporate both the maximum triaxial modal kinetic energy and linear independence of the triaxial target modes at the selected nodes. It was applied to the optimal placement oftriaxial sensors for vibration testing in a hydropower house, and satisfactory results were obtained. This method can provide some guidance for optimal placement of triaxial sensors of underground powerhouses.
基金supported by the National Natural Science Foundation of China (No.61903314)Basic Research Program of Science and Technology of Shenzhen,China (No.JCYJ20190809162807421)+1 种基金Natural Science Foundation of Fujian Province (No.2019J05020)National Research Foundation,Prime Minister’s Office,Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE)programme。
文摘The distribution of measurement noise is usually assumed to be Gaussian in the optimal phasor measurement unit(PMU)placement(OPP)problem.However,this is not always accurate in practice.This paper proposes a new OPP method for smart grids in which the effects of conventional measurements,limited channels of PMUs,zero-injection buses(ZIBs),single PMU loss contingency,state estimation error(SEE),and the maximum SEE variance(MSEEV)are considered.The SEE and MSEEV are both obtained using a robust t-distribution maximum likelihood estimator(MLE)because t-distribution is more flexible for modeling both Gaussian and non-Gaussian noises.The A-and G-optimal experimental criteria are utilized to form the SEE and MSEEV constraints.This allows the optimization problem to be converted into a linear objective function subject to linear matrix inequality observability constraints.The performance of the proposed OPP method is verified by the simulations of the IEEE 14-bus,30-bus,and 118-bus systems as well as the 211-bus practical distribution system in China.
基金supported by the Ministry of Education, Science and Technological Development of the Republic of Serbia (No.TR 33046)。
文摘The problem of optimal placement and sizing(OPS) of renewable distributed generation(RDG) is followed by numerous technical, economical, geographical, and ecological constraints. In this paper, it is investigated from two viewpoints, namely the simultaneous minimization of total energy loss of a distribution network and the maximization of profit for RDG owner. The stochastic nature of RDG such as the wind turbine and photovoltaic generation is accounted using suitable probabilistic models. To solve this problem, a hybrid metaheuristic algorithm is proposed, which is a combination of the phasor particle swarm optimization and the gravitational search algorithm. The proposed algorithm is tested on an IEEE69-bus system for several cases in two scenarios. The results obtained by the hybrid algorithm shows that it provides high-quality solution for all cases considered and has better performances for solving the OPS problem compared to other metaheuristic population-based techniques.
基金supported by the State Grid Science and Technology Project “Research on Technology System and Applications Scenarios of Artificial Intelligence in Power System” (No. SGZJ0000KXJS1800435)Key Technology Project of State Grid Shanghai Municipal Electric Power Company “Research and demonstration of Shanghai power grid reliability analysis platform”Key Technology Project of China Electric Power Research Institute “Research on setting calculation technology of power grid phase protection based on Artificial Intelligence” (JB83-19-007)
文摘To achieve optimal configuration of switching devices in a power distribution system,this paper proposes a repulsive firefly algorithm-based optimal switching device placement method.In this method,the influence of territorial repulsion during firefly courtship is considered.The algorithm is practically applied to optimize the position and quantity of switching devices,while avoiding its convergence to the local optimal solution.The experimental simulation results have showed that the proposed repulsive firefly algorithm is feasible and effective,with satisfying global search capability and convergence speed,holding potential applications in setting value calculation of relay protection and distribution network automation control.
文摘Most wind turbines within wind farms are set up to face a pre-determined wind direction.However,wind directions are intermittent in nature,leading to less electricity production capacity.This paper proposes an algorithm to solve the wind farm layout optimization problem considering multi-angular(MA)wind direction with the aim of maximizing the total power generated on wind farms and minimizing the cost of installation.A twostage genetic algorithm(GA)equipped with complementary sampling and uniform crossover is used to evolve a MA layout that will yield optimal output regardless of the wind direction.In the first stage,the optimal wind turbine layouts for 8 different major wind directions were determined while the second stage allows each of the previously determined layouts to compete and inter-breed so as to evolve an optimal MA wind farm layout.The proposed MA wind farm layout is thereafter compared to other layouts whose turbines have focused site specific wind turbine orientation.The results reveal that the proposed wind farm layout improves wind power production capacity with minimum cost of installation compared to the layouts with site specific wind turbine layouts.This paper will find application at the planning stage of wind farm.
基金National Key Technology Support Program,China(No.2012BAF13B03)Program for Changjiang Scholars and Innovative Research Team in University,China(No.IRT1220)
文摘This study deals with a robot manipulator for yarn bobbin handling in the cotton yarns lattice distortion modification system.The aim is to achieve an operation of yarn bobbin handling with minimal execution time,energy consumption and jerk in motion together.The placement of the robot,in relation to the yarn bobbin stations,is also optimized in conjunction of trajectory optimization.Three possible techniques for building the handling traj'ectory were considered:the quaternion spherical linear interpolation in Cartesian space,the quintic polynomial spline and quintic B-spline in joint space.The genetic algorithm(GA) was used to optimize the trajectories of the robot,with a penalty function to handle nonlinear constraints associated in the robot motion.Two simulations of the optimal trajectory in joint space and the placement of robot were carried out and the results obtained were presented and discussed.It is concluded that the quintic polynomial spline constructs a better trajectory in joint space and the proper placement of robot makes better performance.
文摘Road Side Units(RSUs)are the essential component of vehicular communication for the objective of improving safety and mobility in the road transportation.RSUs are generally deployed at the roadside and more specifically at the intersections in order to collect traffic information from the vehicles and disseminate alarms and messages in emergency situations to the neighborhood vehicles cooperating with the network.However,the development of a predominant RSUs placement algorithm for ensuring competent communication in VANETs is a challenging issue due to the hindrance of obstacles like water bodies,trees and buildings.In this paper,Ruppert’s Delaunay Triangulation Refinement Scheme(RDTRS)for optimal RSUs placement is proposed for accurately estimating the optimal number of RSUs that has the possibility of enhancing the area of coverage during data communication.This RDTRS is proposed by considering the maximum number of factors such as global coverage,intersection popularity,vehicle density and obstacles present in the map for optimal RSUs placement,which is considered as the core improvement over the existing RSUs optimal placement strategies.It is contributed for deploying requisite RSUs with essential transmission range for maximal coverage in the convex map such that each position of the map could be effectively covered by at least one RSU in the presence of obstacles.The simulation experiments of the proposed RDTRS are conducted with complex road traffic environments.The results of this proposed RDTRS confirmed its predominance in reducing the end-to-end delay by 21.32%,packet loss by 9.38%with improved packet delivery rate of 10.68%,compared to the benchmarked schemes.
基金Project(2011CB013804)supported by the National Basic Research Program of China
文摘A methodology, termed estimation error minimization(EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing the limited sensor measurements, the entire structure response can be estimated based on the system equivalent reduction-expansion process(SEREP) method. In order to compare the capability of capturing the structural vibration response with other optimal sensor placement(OSP) methods, the effective independence(EI) method, modal kinetic energy(MKE) method and modal assurance criterion(MAC) method, were also investigated. A statistical criterion, root mean square error(RMSE), was employed to assess the magnitude of the estimation error between the real response and the estimated response. For investigating the effectiveness and accuracy of the above OSP methods, a 31-bar truss structure is introduced as a simulation example. The analysis results show that both the maximum and mean of the RMSE value obtained from the EEM method are smaller than those from other OSP methods, which indicates that the optimal sensor configuration obtained from the EEM method can provide a more accurate estimation of the entire structure response compared with the EI, MKE and MAC methods.
文摘Normally, the power system observation is carried out for the optimal PMUs placement with minimum use of unit in the region of the Smart power grid system. By advanced tool, the process of protection and management of the power system is considered with the measurement of time-synchronized of the voltage and current. In order to have an efficient placement solution for the issue, a novel method is needed with the optimal approach. For complete power network observability of PMU optimal placement a new method is implemented. However, the process of placement and connection of the buses is considered at various places with the same cost of installation. GA based Enhanced Harmony and Binary Search Algorithm (GA-EHBSA) is proposed and utilized with the improvement to have least PMU placement and better optimization approach for finding the optimal location. To evaluate the optimal placement of PMUs the proposed approach is implemented in the standard test systems of IEEE 14-bus, IEEE 24-bus, IEEE 30-bus, IEEE 39-bus and IEEE 57-bus. The simulation results are evaluated and compared with existing algorithm to show the efficient process of optimal PMUs placement with better optimization, minimum cost and redundancy than the existing.
基金supported by the National Natural Science Foundation of China(72025103,72394360,72394362,and 72361137001)the Project of Science and Technology Commission of Shanghai Municipality,China(23JC1402200).
文摘Placement optimization is a crucial phase in chip design,involving the strategic arrangement of cells within a limited region to enhance space utilization and reduce wirelength.Chip design enterprises need to optimize the placement according to design rules to meet customer demands.While mixed-cell-height circuits are widely used in modern chip design,few studies have simultaneously considered the non-overlapping cells,rails alignment,and minimum implantation area constraints in the placement optimization problems.Hence,this study involves preprocessing the non-linear parts and developing a mixed-integer linear programming model to reduce the cost of legalizing chip placements for businesses.Furthermore,this study designs and implements an exact algorithm based on Benders decomposition,utilizing dual theory to obtain an optimal cut and iteratively solve for the coordinates of cells.Numerical experiments across various scales validate the performance of the algorithm.Through a detailed analysis of the shape of the chip region division,the proportion of different types of cells,the total number of cells and bins,and their impact on the placement,we derive some potentially useful design insights that can benefit chip design enterprises.
文摘In this paper a new method has been proposed to decide optimal placement and best sizing of STATCOM （static synchronous compensator）. The best place of STATCOM is found using the sensitivity analysis and optimum sizing of STATCOM is managed using the genetic algorithm. The average model can account for the high-frequency effects and power electronic losses, and more accurately predict the active and reactive power outputs of the STATCOM. This paper employs the DIgSILENT simulator and DPL （DIgSILENT programming language） as a programming tool of the DIgSILENT to show the validity of the proposed method. The effectiveness of suggested approach has been tested on part of the distribution network of Iran, Khoramdarreh city in Zanjan province.
