Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the tr...Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.展开更多
In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First,...In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.展开更多
This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch curre...This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch current excited by plane wave. Impedance matrix elements are computed by using fast Fourier transform(FFT), and reduced equation is solved by using diakoptic technique. Consequently, the computing time is reduced significantly. The convergence property of simulating open structure by using PBC and the comparison of the computer time between using PBC and usual absorbing boundary condition (ABC) show the validity of the method proposed in this paper. Finally, the resonant frequency of a microstrip patch is computed. The numerical results obtained are in good agreement with those published.展开更多
This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete （FRC） round determinate panels （RDP）. The objective of this research is t...This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete （FRC） round determinate panels （RDP）. The objective of this research is to set up a modified RDP test method to improve the current ASTM C1550 test method for FRC and fibre reinforced shotcrete （FRS） composite. By this test method, light small-diameter panels are applied and more crack information can be obtained by a new rotation angle measuring technique. It is shown that this modified test method can be used to effectively evaluate the crack opening resistance of FRC. The finite element analysis was then performed to clarify the crack propaga- tions and failure mode of FRC RDP panels. It helps establish a reasonable theoretical method to predict the structural response of RDP. combining with this modified testing technioue.展开更多
It is not reasonable that one can only use the adjoint of model in data assimilation. The simulated numerical experiment shows that for the tidal model, the result of the adjoint of equation is almost the same as that...It is not reasonable that one can only use the adjoint of model in data assimilation. The simulated numerical experiment shows that for the tidal model, the result of the adjoint of equation is almost the same as that of the adjoint of model: the averaged absolute difference of the amplitude between observations and simulation is less than 5.0 cm and that of the phase-lag is less than 5.0°. The results are both in good agreement with the observed M2 tide in the Bohai Sea and the Yellow Sea. For comparison, the traditional methods also have been used to simulate M2 tide in the Bohai Sea and the Yellow Sea. The initial guess values of the boundary conditions are given first, and then are adjusted to acquire the simulated results that are as close as possible to the observations. As the boundary conditions contain 72 values, which should be adjusted and how to adjust them can only be partially solved by adjusting them many times. The satisfied results are hard to acquire even gigantic efforts are done. Here, the automation of the treatment of the open boundary conditions is realized. The method is unique and superior to the traditional methods. It is emphasized that if the adjoint of equation is used, tedious and complicated mathematical deduction can be avoided. Therefore the adjoint of equation should attract much attention.展开更多
[Objective] This study aimed to establish a new method for preparing paraffin sections of cattle eyebal s. [Method] The conventional method was used to prepare paraffin sections for cattle eyebal s in the control and ...[Objective] This study aimed to establish a new method for preparing paraffin sections of cattle eyebal s. [Method] The conventional method was used to prepare paraffin sections for cattle eyebal s in the control and a new method termed＆quot;opening a window on cornea and refixation＆quot; was used to prepare paraffin sections for cattle eyebal s in the treatment group. [Result] After the prepared specimens in the treatment group were fixed, it could be macroscopical y observed that retina and choroid were closely connected, with detachment occurring at a smal portion be-tween the two. According to the paraffin sections, it was microscopical y observed that the continuity of trabecular meshwork was intact, as wel as the continuity be-tween different layers of eyebal wal , without detachment between them, no retinal detachment, no shrinkage of each layer of tissue cells. [Conclusion] This study pro-vides a foundation for the basic research and pathological study of eyebal s.展开更多
开式转子发动机具备高效率、高燃油经济性的优点,然而开式转子叶片巨大的噪声辐射是亟待解决的问题。基于非定常涡格法、涡粒子法和Ffowcs-Williams and Hawkings方程,发展了不依赖于空间体网格的开式转子气动-噪声高效预测方法,引入三...开式转子发动机具备高效率、高燃油经济性的优点,然而开式转子叶片巨大的噪声辐射是亟待解决的问题。基于非定常涡格法、涡粒子法和Ffowcs-Williams and Hawkings方程,发展了不依赖于空间体网格的开式转子气动-噪声高效预测方法,引入三维普朗特-葛劳渥法则,进行可压缩性修正。针对NASA(National Aeronautics and Space Administration)SR-7A单排开式转子的起飞工况进行了验证计算,气动结果与NASA试验值和商业软件计算值的误差均小于1%,主要单音噪声与总声压级指向性结果预测误差可低至1 dB以内。在同等研究对象和硬件条件下,本文方法计算所需CPU核时低于通用URANS(Unsteady Reynolds-Averaged Navier-Stokes)计算所需的1%。考虑起飞迎角下的周向不均匀来流畸变,系统研究了SR-7A单排转子在0°~20°来流迎角下的气动参数和噪声特性。结果表明,随着来流迎角的增大,转子的时均推力、功率、效率呈现指数增长趋势,转子桨盘内载荷时均值呈现线性增长趋势。转子各项载荷的非定常波动幅值随着迎角的增大而增加。单个叶片的载荷波动峰谷值与运动相位相比存在17°~56°的相位滞后现象,这与噪声周向指向性结果中的偏转非常相关。在0°~20°迎角内,转子上方总声压级从107 dB降低至99 dB,转子下方位置总声压级从107 dB升高至114 dB。此外,来流迎角与桨盘的相互作用会额外导致最高达73 dB的轴频率单音噪声。针对单排转子的噪声源项解耦分析表明,来流迎角对非定常载荷噪声的增益作用非常显著。本文开发的方法可以用较低成本得到开式转子的非定常气动及噪声特性,并且具备多角度的噪声源解耦能力,为未来低噪声开式转子设计提供了有力工具。展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52174064)
文摘Determining the venting time of a gas trunk pipeline segment provides an important basis for formulating an emergency plan in the advent of unexpected accidents.As the natural gas venting process corresponds to the transient flow,it is necessary to establish a transient hydraulic-thermal simulation model in order to determine the venting time.In this paper,based on two kinds of venting scenarios in which there is only one venting point in the venting system of a gas trunk pipeline segment—namely,where the venting point is either at one of the two ends or at the junction of two gas trunk pipeline segments—transient hydraulic-thermal simulation models are established.The models consist of gas flow governing equations,the gas state equation,gas physical property equations,initial conditions,and appropriate boundary conditions.The implicit central difference method is used to discretize the gas flow partial differential equations,and the trust-region-dogleg algorithm is used to solve the equations corresponding to each time step,in order to dynamically simulate the whole venting process.The judgment condition for the end of the venting process is that the average pressure of gas trunk pipeline segment is less than 0.11 MPa(actual pressure).Comparing the simulation results of the proposed model with those of the OLGA software and real operational data,we find that the venting time error is less than 10%.On this basis,a venting valve opening control principle is proposed,which prevents the venting noise from exceeded the specified noise value(85 d B)in the venting design of domestic gas pipeline projects.The established calculation model for venting time(dynamic simulation model)for a gas trunk pipeline segment and the proposed opening control principle of venting valve provide reference for the optimal operation of gas pipeline venting systems.
基金supported by National Natural Science Foundation of China(61573330)Chinese Academy of Sciences(CAS)the World Academy of Sciences(TWAS)
文摘In this paper, the control laws based on the Lyapunov stability theorem are designed for a two-level open quantum system to prepare the Hadamard gate, which is an important basic gate for the quantum computers. First, the density matrix interested in quantum system is transferred to vector formation.Then, in order to obtain a controller with higher accuracy and faster convergence rate, a Lyapunov function based on the matrix logarithm function is designed. After that, a procedure for the controller design is derived based on the Lyapunov stability theorem. Finally, the numerical simulation experiments for an amplitude damping Markovian open quantum system are performed to prepare the desired quantum gate. The simulation results show that the preparation of Hadamard gate based on the proposed control laws can achieve the fidelity up to 0.9985 for the different coupling strengths.
基金Supported by the National Natural Science Foundation of China
文摘This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch current excited by plane wave. Impedance matrix elements are computed by using fast Fourier transform(FFT), and reduced equation is solved by using diakoptic technique. Consequently, the computing time is reduced significantly. The convergence property of simulating open structure by using PBC and the comparison of the computer time between using PBC and usual absorbing boundary condition (ABC) show the validity of the method proposed in this paper. Finally, the resonant frequency of a microstrip patch is computed. The numerical results obtained are in good agreement with those published.
基金Supported by the National Natural Science Foundation of China (50708084)Wuhan Chenguang Science and Technology Project for Young Experts (20035002016-30)
文摘This paper presents a numerical analysis of a material test program investigating the crack opening properties of fibre reinforced concrete （FRC） round determinate panels （RDP）. The objective of this research is to set up a modified RDP test method to improve the current ASTM C1550 test method for FRC and fibre reinforced shotcrete （FRS） composite. By this test method, light small-diameter panels are applied and more crack information can be obtained by a new rotation angle measuring technique. It is shown that this modified test method can be used to effectively evaluate the crack opening resistance of FRC. The finite element analysis was then performed to clarify the crack propaga- tions and failure mode of FRC RDP panels. It helps establish a reasonable theoretical method to predict the structural response of RDP. combining with this modified testing technioue.
文摘It is not reasonable that one can only use the adjoint of model in data assimilation. The simulated numerical experiment shows that for the tidal model, the result of the adjoint of equation is almost the same as that of the adjoint of model: the averaged absolute difference of the amplitude between observations and simulation is less than 5.0 cm and that of the phase-lag is less than 5.0°. The results are both in good agreement with the observed M2 tide in the Bohai Sea and the Yellow Sea. For comparison, the traditional methods also have been used to simulate M2 tide in the Bohai Sea and the Yellow Sea. The initial guess values of the boundary conditions are given first, and then are adjusted to acquire the simulated results that are as close as possible to the observations. As the boundary conditions contain 72 values, which should be adjusted and how to adjust them can only be partially solved by adjusting them many times. The satisfied results are hard to acquire even gigantic efforts are done. Here, the automation of the treatment of the open boundary conditions is realized. The method is unique and superior to the traditional methods. It is emphasized that if the adjoint of equation is used, tedious and complicated mathematical deduction can be avoided. Therefore the adjoint of equation should attract much attention.
基金Supported by China Agriculture Research System(CARS-38)~~
文摘[Objective] This study aimed to establish a new method for preparing paraffin sections of cattle eyebal s. [Method] The conventional method was used to prepare paraffin sections for cattle eyebal s in the control and a new method termed＆quot;opening a window on cornea and refixation＆quot; was used to prepare paraffin sections for cattle eyebal s in the treatment group. [Result] After the prepared specimens in the treatment group were fixed, it could be macroscopical y observed that retina and choroid were closely connected, with detachment occurring at a smal portion be-tween the two. According to the paraffin sections, it was microscopical y observed that the continuity of trabecular meshwork was intact, as wel as the continuity be-tween different layers of eyebal wal , without detachment between them, no retinal detachment, no shrinkage of each layer of tissue cells. [Conclusion] This study pro-vides a foundation for the basic research and pathological study of eyebal s.
文摘开式转子发动机具备高效率、高燃油经济性的优点,然而开式转子叶片巨大的噪声辐射是亟待解决的问题。基于非定常涡格法、涡粒子法和Ffowcs-Williams and Hawkings方程,发展了不依赖于空间体网格的开式转子气动-噪声高效预测方法,引入三维普朗特-葛劳渥法则,进行可压缩性修正。针对NASA(National Aeronautics and Space Administration)SR-7A单排开式转子的起飞工况进行了验证计算,气动结果与NASA试验值和商业软件计算值的误差均小于1%,主要单音噪声与总声压级指向性结果预测误差可低至1 dB以内。在同等研究对象和硬件条件下,本文方法计算所需CPU核时低于通用URANS(Unsteady Reynolds-Averaged Navier-Stokes)计算所需的1%。考虑起飞迎角下的周向不均匀来流畸变,系统研究了SR-7A单排转子在0°~20°来流迎角下的气动参数和噪声特性。结果表明,随着来流迎角的增大,转子的时均推力、功率、效率呈现指数增长趋势,转子桨盘内载荷时均值呈现线性增长趋势。转子各项载荷的非定常波动幅值随着迎角的增大而增加。单个叶片的载荷波动峰谷值与运动相位相比存在17°~56°的相位滞后现象,这与噪声周向指向性结果中的偏转非常相关。在0°~20°迎角内,转子上方总声压级从107 dB降低至99 dB,转子下方位置总声压级从107 dB升高至114 dB。此外,来流迎角与桨盘的相互作用会额外导致最高达73 dB的轴频率单音噪声。针对单排转子的噪声源项解耦分析表明,来流迎角对非定常载荷噪声的增益作用非常显著。本文开发的方法可以用较低成本得到开式转子的非定常气动及噪声特性,并且具备多角度的噪声源解耦能力,为未来低噪声开式转子设计提供了有力工具。
