Calcium carboaluminate was successfully prepared by a simple and efficient one-step method,and the effects of temperature,time,raw material ratio,carbonate type and heavy CaCO_(3)particle size on the products were inv...Calcium carboaluminate was successfully prepared by a simple and efficient one-step method,and the effects of temperature,time,raw material ratio,carbonate type and heavy CaCO_(3)particle size on the products were investigated in detail.The results show that increasing the temperature and extending the reaction time can enhance the yield and crystallisation degree of calcium carboaluminate.The proportion of Ca(OH)_(2),Al(OH)_(3)and CaCO_(3)is a pivotal factor in the synthesis of calcium carboaluminate.When the ratio of Ca(OH)_(2),Al(OH)_(3)and CaCO_(3)is 3:2:1,the diffraction peaks of calcium carboaluminate in the products are relatively sharp and strong.Furthermore,the purity and crystallinity of the synthesized calcium carboaluminate are higher when heavy CaCO_(3)with the particle size of 120 mesh is used as the carbonate raw material,in comparison to CO_(2),Na_(2)CO_(3)and light CaCO_(3).As results,a simple and efficient method for the synthesis of calcium carboaluminate is proposed,which will provide a solid experimental foundation and technical support for the industrial application of calcium carboaluminate in marine concrete.展开更多
The optimal condition for a one-step process removing organic compounds from coking wastewater by simultaneously synthesized organobentonite as a pretreatment was investigated.Results showed that sorption of organic c...The optimal condition for a one-step process removing organic compounds from coking wastewater by simultaneously synthesized organobentonite as a pretreatment was investigated.Results showed that sorption of organic compounds by organobentonite was positively correlated to the cation surfactant exchange on the bentonite and the octanol-water partition coefficient（Kow） of the solutes.With 0.75 g/L bentonite and 180 mg/L（60% of bentonite cation exchange capacity） cetyltrimethylammonium bromide,the removal efficiencies of the 16 polycyclic aromatic hydrocarbon（PAHs） specified by the US Environmental Protection Agency in coking wastewater except naphthalene were more than 90%,and that of benzo（a）pyrene was 99.5%.At the same time,the removal efficiencies of CODCr,NH3-N,volatile phenols,colour and turbidity were 28.6%,13.2%,8.9%,55% and 84.3%,respectively,and the ratio of BOD5/CODCr increased from 0.31 to 0.41.These results indicated that the one-step process had high removal efficiency for toxic and refractory hydrophobic organic compounds,and could improve the biodegradability of the coking wastewater.Therefore it could be a promising technology for the pretreatment of toxic and refractory organic wastewater.展开更多
Formation of super-hydrophobic and corrosion-resistant coatings can provide significant corrosion protection to magnesium alloys.However,it remains a grand challenge to produce such coatings for magnesium-lithium allo...Formation of super-hydrophobic and corrosion-resistant coatings can provide significant corrosion protection to magnesium alloys.However,it remains a grand challenge to produce such coatings for magnesium-lithium alloys due to their high chemical reactivity.Herein,a one-step hydrothermal processing was developed using a stearic-acid-based precursor medium,which enables the hydrothermal conversion and the formation of low surface energy materials concurrently to produce the super-hydrophobic and corrosion-resistant coating.The multiscale microstructures with nanoscale stacks and microscale spheres on the surface,as well as the through-thickness stearates,lead to the super-hydrophobicity and excellent corrosion resistance of the obtained coating.展开更多
To enable the utilization of low-grade and high-sulfur bauxite, the suspension calcination was used to remove the sulfur and the activate silica minerals, and the calcinated bauxite was subjected to a desilication pro...To enable the utilization of low-grade and high-sulfur bauxite, the suspension calcination was used to remove the sulfur and the activate silica minerals, and the calcinated bauxite was subjected to a desilication process in Na OH solution under atmospheric pressure. The desulfurization and desilication properties and mineralogical evolution were studied by X-ray diffraction, thermogravimetry–differential thermal analysis, scanning electron microscopy, and FactSage methods. The results demonstrate that the suspension calcination method is efficient for sulfur removal: 84.21% of S was removed after calcination at 1000°C for 2 min. During the calcination process, diaspore and pyrite were transferred to α-Al2O3, magnetite, and hematite. The phase transformation of pyrite follows the order FeS2 → Fe3O4 → Fe2O3, and the iron oxides and silica were converted into iron silicate. In the alkali-soluble desilication process, the optimum condition was an alkali solution concentration of 110 g/L, a reaction time of 20 min, and a reaction temperature of 95°C. The corresponding desilication ratio and alumina loss ratio were 44.9% and 2.4%, respectively, and the alumina-to-silica mass ratio of the concentrate was 7.9. The Al2O3·2SiO2, SiO2, and Al2O3 formed during the calcination process could react with Na OH solution, and their activity decreased in the order of Al2O3·2 SiO2, SiO2, and Al2O3.展开更多
This work presents a method to solve the weak solubility of zinc chloride(ZnCl_2) in the ethanol by adding some reasonable water into an ethanol electrolyte containing ZnCl_2 and myristic acid(CH_3(CH_2)_(12)COOH).A r...This work presents a method to solve the weak solubility of zinc chloride(ZnCl_2) in the ethanol by adding some reasonable water into an ethanol electrolyte containing ZnCl_2 and myristic acid(CH_3(CH_2)_(12)COOH).A rapid one-step electrodeposition process was developed to fabricate anodic(2.5 min) and cathodic(40 s) superhydrophobic surfaces of copper substrate(contact angle more than 150°) in an aqueous ethanol electrolyte.Morphology,composition,chemical structure and superhydrophobicity of these superhydrophobic surfaces were investigated by SEM,FTIR,XRD,and contact angle measurement,respectively.The results indicate that water ratio of the electrolyte can reduce the required deposition time,superhydrophobic surface needs over 30 min with anhydrous electrolyte,while it needs only 2.5 min with electrolyte including 10 mL water,and the maximum contact angle of anodic surface is 166° and that of the cathodic surface is 168°.Two copper electrode surfaces have different reactions in the process of electrodeposition time,and the anodic copper surface covers copper myristate(Cu[CH_3(CH_2)_(12)COO]_2) and cupric chloride(CuCl);while,zinc myristate(Zn[CH_3(CH_2)_(12)COO]_2) and pure zinc(Zn) appear on the cathodic surface.展开更多
Energy saving has been an important concept in modern industry especially to the countries and regions with energy shortage such as China and Japan. Utilization of Coal-Water Slurry （CWS） can improve the burning eff...Energy saving has been an important concept in modern industry especially to the countries and regions with energy shortage such as China and Japan. Utilization of Coal-Water Slurry （CWS） can improve the burning efficiency of coal and reduce the pollutions of soot, sulfide and the nitride by burning lump coal directly. The CWS is a promising energy saving technique and the effectual substitute of oil. The study on the preparation and application of the CWS has made progresses in many aspects. The present paper studied the basal problems for applying the CWS on the rotary kilns during the calcining-dolomite process in the magnesium factory, summarized the key points for the application process of the CWS and gave the corresponding solutions.展开更多
ε-Caprolactam（CL or CPL） is one of the most important intermediates used in polymer industry for the production of several million tons of nylon-6 every year^[1]. All current commercial processes for the production...ε-Caprolactam（CL or CPL） is one of the most important intermediates used in polymer industry for the production of several million tons of nylon-6 every year^[1]. All current commercial processes for the production of caprolactam are based on either benzene or tolueneI21. Caprolactam is synthesized by the Beckmann rearrangement of cyclohexanone oxime with fuming sulfuric acid or sulfuric acid as the reaction medium, and cyclohexanone oxime is produced by the reaction between cyclohexanone and hydro- xylamine（only one exception is the Toray PNC process）.展开更多
A series of graphitic-C3N4/ZnS（g-C3N4/ZnS） supercapacitor electrode materials have been prepared via a one-step calcination process of zinc acetate/thiourea with different mass ratios under nitrogen atmosphere. The ...A series of graphitic-C3N4/ZnS（g-C3N4/ZnS） supercapacitor electrode materials have been prepared via a one-step calcination process of zinc acetate/thiourea with different mass ratios under nitrogen atmosphere. The optimized g-C3N4/ZnS composite shows a highest specific capacitance of 497.7 F/g at 1 A/g and good cycling stability with capacitance retention of 80.4% at 5 A/g after 1000 cycles. Moreover, gC3N4/ZnS composites display an improved supercapacitor performance in terms of specific capacitance compared to the pure g-C3N4 and ZnS. In addition, our designed symmetric supercapacitor device based on g-C3N4/ZnS composite electrodes can exhibit an energy density of 10.4 Wh/kg at a power density of 187.3 W/kg. As a result, g-C3N4/ZnS composites are expected to be a prospective material for supercapacitors and other energy storage applications.展开更多
For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control mac...For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control machining error, the method of integrating multivariate statistical process control （MSPC） and stream of variations （SoV） is proposed. Firstly, machining error is modeled by multi-operation approaches for part machining process. SoV is adopted to establish the mathematic model of the relationship between the error of upstream operations and the error of downstream operations. Here error sources not only include the influence of upstream operations but also include many of other error sources. The standard model and the predicted model about SoV are built respectively by whether the operation is done or not to satisfy different requests during part machining process. Secondly, the method of one-step ahead forecast error （OSFE） is used to eliminate autocorrelativity of the sample data from the SoV model, and the T2 control chart in MSPC is built to realize machining error detection according to the data characteristics of the above error model, which can judge whether the operation is out of control or not. If it is, then feedback is sent to the operations. The error model is modified by adjusting the operation out of control, and continually it is used to monitor operations. Finally, a machining instance containing two operations demonstrates the effectiveness of the machining error control method presented in this paper.展开更多
By theoretical analysis of heat transfer during the "one-step" directional solidification process, the functional relation between the temperature in solid-liquid interface and its effect factor was studied....By theoretical analysis of heat transfer during the "one-step" directional solidification process, the functional relation between the temperature in solid-liquid interface and its effect factor was studied. The thermal gradient in solid liquid interface and heat transfer coefficient between the samples and surroundings were also calculated. On the basis of the above analysis, some suggestions for improving the thermal gradient in solid-liquid interface were put forward. It will provide a theoretical instruction for preparing high performance giant magnetostrictive materials (GMM).展开更多
基金Funded by the National Nature Science Foundation of China(No.52078321)。
文摘Calcium carboaluminate was successfully prepared by a simple and efficient one-step method,and the effects of temperature,time,raw material ratio,carbonate type and heavy CaCO_(3)particle size on the products were investigated in detail.The results show that increasing the temperature and extending the reaction time can enhance the yield and crystallisation degree of calcium carboaluminate.The proportion of Ca(OH)_(2),Al(OH)_(3)and CaCO_(3)is a pivotal factor in the synthesis of calcium carboaluminate.When the ratio of Ca(OH)_(2),Al(OH)_(3)and CaCO_(3)is 3:2:1,the diffraction peaks of calcium carboaluminate in the products are relatively sharp and strong.Furthermore,the purity and crystallinity of the synthesized calcium carboaluminate are higher when heavy CaCO_(3)with the particle size of 120 mesh is used as the carbonate raw material,in comparison to CO_(2),Na_(2)CO_(3)and light CaCO_(3).As results,a simple and efficient method for the synthesis of calcium carboaluminate is proposed,which will provide a solid experimental foundation and technical support for the industrial application of calcium carboaluminate in marine concrete.
基金supported by the National Natural Science Foundation of China (No. 20890111)
文摘The optimal condition for a one-step process removing organic compounds from coking wastewater by simultaneously synthesized organobentonite as a pretreatment was investigated.Results showed that sorption of organic compounds by organobentonite was positively correlated to the cation surfactant exchange on the bentonite and the octanol-water partition coefficient（Kow） of the solutes.With 0.75 g/L bentonite and 180 mg/L（60% of bentonite cation exchange capacity） cetyltrimethylammonium bromide,the removal efficiencies of the 16 polycyclic aromatic hydrocarbon（PAHs） specified by the US Environmental Protection Agency in coking wastewater except naphthalene were more than 90%,and that of benzo（a）pyrene was 99.5%.At the same time,the removal efficiencies of CODCr,NH3-N,volatile phenols,colour and turbidity were 28.6%,13.2%,8.9%,55% and 84.3%,respectively,and the ratio of BOD5/CODCr increased from 0.31 to 0.41.These results indicated that the one-step process had high removal efficiency for toxic and refractory hydrophobic organic compounds,and could improve the biodegradability of the coking wastewater.Therefore it could be a promising technology for the pretreatment of toxic and refractory organic wastewater.
基金support from the Fundamental Research Funds for the Central Universities of Hohai university(B200202122)National Natural Science Foundation of China(51878246 and 51979099)+1 种基金the Natural Science Foundation of Jiangsu Province of China(BK20191303)Key Research and Development Project of Jiangsu Province of China(BE2017148).
文摘Formation of super-hydrophobic and corrosion-resistant coatings can provide significant corrosion protection to magnesium alloys.However,it remains a grand challenge to produce such coatings for magnesium-lithium alloys due to their high chemical reactivity.Herein,a one-step hydrothermal processing was developed using a stearic-acid-based precursor medium,which enables the hydrothermal conversion and the formation of low surface energy materials concurrently to produce the super-hydrophobic and corrosion-resistant coating.The multiscale microstructures with nanoscale stacks and microscale spheres on the surface,as well as the through-thickness stearates,lead to the super-hydrophobicity and excellent corrosion resistance of the obtained coating.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.U1812402,51664005,and 51774102)Talents of Guizhou Science and Technology Cooperation Platform(Talent Team Giant[2015]4005,Platform Talent[2017]5788,[2017]5626,and KY(2015)334).
文摘To enable the utilization of low-grade and high-sulfur bauxite, the suspension calcination was used to remove the sulfur and the activate silica minerals, and the calcinated bauxite was subjected to a desilication process in Na OH solution under atmospheric pressure. The desulfurization and desilication properties and mineralogical evolution were studied by X-ray diffraction, thermogravimetry–differential thermal analysis, scanning electron microscopy, and FactSage methods. The results demonstrate that the suspension calcination method is efficient for sulfur removal: 84.21% of S was removed after calcination at 1000°C for 2 min. During the calcination process, diaspore and pyrite were transferred to α-Al2O3, magnetite, and hematite. The phase transformation of pyrite follows the order FeS2 → Fe3O4 → Fe2O3, and the iron oxides and silica were converted into iron silicate. In the alkali-soluble desilication process, the optimum condition was an alkali solution concentration of 110 g/L, a reaction time of 20 min, and a reaction temperature of 95°C. The corresponding desilication ratio and alumina loss ratio were 44.9% and 2.4%, respectively, and the alumina-to-silica mass ratio of the concentrate was 7.9. The Al2O3·2SiO2, SiO2, and Al2O3 formed during the calcination process could react with Na OH solution, and their activity decreased in the order of Al2O3·2 SiO2, SiO2, and Al2O3.
基金Projects(11304243,11102164)supported by the National Natural Science Foundation of ChinaProject(2014JQ1039)supported by the Natural Science Foundation of Shannxi Province,China+3 种基金Project(12JK0966)supported by the Shaanxi Provincial Education Department,ChinaProject(2013QDJ037)supported by the Xi’an University of Science and Technology Dr Scientific Research Fund,ChinaProject(3102016ZY027)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(13GH014602)supported by the Program of New Staff and Research Area Project of NPU,China
文摘This work presents a method to solve the weak solubility of zinc chloride(ZnCl_2) in the ethanol by adding some reasonable water into an ethanol electrolyte containing ZnCl_2 and myristic acid(CH_3(CH_2)_(12)COOH).A rapid one-step electrodeposition process was developed to fabricate anodic(2.5 min) and cathodic(40 s) superhydrophobic surfaces of copper substrate(contact angle more than 150°) in an aqueous ethanol electrolyte.Morphology,composition,chemical structure and superhydrophobicity of these superhydrophobic surfaces were investigated by SEM,FTIR,XRD,and contact angle measurement,respectively.The results indicate that water ratio of the electrolyte can reduce the required deposition time,superhydrophobic surface needs over 30 min with anhydrous electrolyte,while it needs only 2.5 min with electrolyte including 10 mL water,and the maximum contact angle of anodic surface is 166° and that of the cathodic surface is 168°.Two copper electrode surfaces have different reactions in the process of electrodeposition time,and the anodic copper surface covers copper myristate(Cu[CH_3(CH_2)_(12)COO]_2) and cupric chloride(CuCl);while,zinc myristate(Zn[CH_3(CH_2)_(12)COO]_2) and pure zinc(Zn) appear on the cathodic surface.
文摘Energy saving has been an important concept in modern industry especially to the countries and regions with energy shortage such as China and Japan. Utilization of Coal-Water Slurry （CWS） can improve the burning efficiency of coal and reduce the pollutions of soot, sulfide and the nitride by burning lump coal directly. The CWS is a promising energy saving technique and the effectual substitute of oil. The study on the preparation and application of the CWS has made progresses in many aspects. The present paper studied the basal problems for applying the CWS on the rotary kilns during the calcining-dolomite process in the magnesium factory, summarized the key points for the application process of the CWS and gave the corresponding solutions.
基金Supported by the National Natural Science Foundation of China(Nos 20233040 and 20572021)
文摘ε-Caprolactam（CL or CPL） is one of the most important intermediates used in polymer industry for the production of several million tons of nylon-6 every year^[1]. All current commercial processes for the production of caprolactam are based on either benzene or tolueneI21. Caprolactam is synthesized by the Beckmann rearrangement of cyclohexanone oxime with fuming sulfuric acid or sulfuric acid as the reaction medium, and cyclohexanone oxime is produced by the reaction between cyclohexanone and hydro- xylamine（only one exception is the Toray PNC process）.
基金supported by the National Nature Science Foundations of China (Grant no. 51372212)
文摘A series of graphitic-C3N4/ZnS（g-C3N4/ZnS） supercapacitor electrode materials have been prepared via a one-step calcination process of zinc acetate/thiourea with different mass ratios under nitrogen atmosphere. The optimized g-C3N4/ZnS composite shows a highest specific capacitance of 497.7 F/g at 1 A/g and good cycling stability with capacitance retention of 80.4% at 5 A/g after 1000 cycles. Moreover, gC3N4/ZnS composites display an improved supercapacitor performance in terms of specific capacitance compared to the pure g-C3N4 and ZnS. In addition, our designed symmetric supercapacitor device based on g-C3N4/ZnS composite electrodes can exhibit an energy density of 10.4 Wh/kg at a power density of 187.3 W/kg. As a result, g-C3N4/ZnS composites are expected to be a prospective material for supercapacitors and other energy storage applications.
基金National Natural Science Foundation of China (70931004)
文摘For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control machining error, the method of integrating multivariate statistical process control （MSPC） and stream of variations （SoV） is proposed. Firstly, machining error is modeled by multi-operation approaches for part machining process. SoV is adopted to establish the mathematic model of the relationship between the error of upstream operations and the error of downstream operations. Here error sources not only include the influence of upstream operations but also include many of other error sources. The standard model and the predicted model about SoV are built respectively by whether the operation is done or not to satisfy different requests during part machining process. Secondly, the method of one-step ahead forecast error （OSFE） is used to eliminate autocorrelativity of the sample data from the SoV model, and the T2 control chart in MSPC is built to realize machining error detection according to the data characteristics of the above error model, which can judge whether the operation is out of control or not. If it is, then feedback is sent to the operations. The error model is modified by adjusting the operation out of control, and continually it is used to monitor operations. Finally, a machining instance containing two operations demonstrates the effectiveness of the machining error control method presented in this paper.
基金This project was supported by the Natural Science Foundation of Beijing (2042012)
文摘By theoretical analysis of heat transfer during the "one-step" directional solidification process, the functional relation between the temperature in solid-liquid interface and its effect factor was studied. The thermal gradient in solid liquid interface and heat transfer coefficient between the samples and surroundings were also calculated. On the basis of the above analysis, some suggestions for improving the thermal gradient in solid-liquid interface were put forward. It will provide a theoretical instruction for preparing high performance giant magnetostrictive materials (GMM).
