Pursuing significant thermal rectification effect with minimal temperature differences is critical for thermal rectifiers.While asymmetric structures enable spectral matching,they inherently limit thermal rectificatio...Pursuing significant thermal rectification effect with minimal temperature differences is critical for thermal rectifiers.While asymmetric structures enable spectral matching,they inherently limit thermal rectification performance.To address this issue,we developed a thermal rectification structure comprising a current-biased graphene-coated silicon carbide(SiC)substrate paired with another graphene-coated SiC substrate separated by a nanoscale vacuum gap.A current-biased graphene sheet generates nonreciprocal effect that actively modulates radiative energy transfer.Our theoretical framework demonstrates that the current-biased graphene achieves a high thermal diode efficiency even under a modest temperature difference.Remarkably,the thermal diode efficiency exceeds 0.8 at a temperature difference of just 100 K(between 300 K and 400 K).These findings highlight the synergistic enhancement from graphene coatings and current biasing,providing a viable strategy for nanoscale thermal management applications.展开更多
Carbon nanotubes(CNTs)are widely used in various fields owing to their unique properties.In this study,three different types of nitrogen-doped CNT heterojunctions were constructed:parallel-doped(PCNT),vertically doped...Carbon nanotubes(CNTs)are widely used in various fields owing to their unique properties.In this study,three different types of nitrogen-doped CNT heterojunctions were constructed:parallel-doped(PCNT),vertically doped(VCNT),and mesh-doped(MCNT).Non-equilibrium molecular dynamics(NEMD)simulations were conducted to investigate their heat flux and thermal rectification(TR)effects.The results show that heat flux preferentially flows from nitrogen-doped regions to undoped regions,exhibiting distinct thermal rectification behavior,with PCNT showing the most pronounced effect.Interestingly,the TR ratio of the zigzag PCNT is significantly higher than that of the armchair PCNT.Subsequently,we examined the effects of system length and diameter on the TR ratio of the PCNT and found that the TR ratio increases and then decreases with increasing model length.In addition,the effect of defect density on the heat flux of the PCNT is peculiar.The phonon density of states,phonon dispersion,participation ratio,and phonon spectral heat flux were analyzed to elucidate the thermal transport behavior of phonons in the nanotubes.This study provides insights into the development and design of nitrogen-doped CNT thermal rectifiers.展开更多
A mass on-line control type impact inertial piezoelectric actuator with a bionic wheat structure is proposed in this work.Inspired by the anisotropic friction mechanism of natural wheat awns,a bioinspired mechanism is...A mass on-line control type impact inertial piezoelectric actuator with a bionic wheat structure is proposed in this work.Inspired by the anisotropic friction mechanism of natural wheat awns,a bioinspired mechanism is used to achieve the designed driving strategy based on the asymmetric-mass control method that mimics bidirectional motion characteristics of wheat awn.A lumped parameter theoretical model is established,and the numerical simulation results have verified the designed bionic working principle and revealed the key system parameters.Experimental results show that the prototype has the bi-directional motion ability inherited from anisotropic friction of wheat awn,with theoretically infinite stroke and can easily obtain the required step displacement and velocity by conveniently adjusting the voltage.It can achieve a resolution of 0.7μm,and a forward and backward maximum velocity of 12.7μm/s and 90.72μm/s respectively.In addition,the actuator also has the advantages of good stability,control convenience,and ease of integration.Besides,the actuator is capable of adjusting motion direction via voltage,providing a significant advantage in precise bidirectional control.This study confirms that the proposed mass on-line control type actuator embodies a successful bionic translation from plant morphology to precision engineering,and adds a new member to the family of impact inertial piezoelectric actuators,which completes the last piece of the puzzle for the impact inertial driving mechanism.It promotes the further development of inertial precision driving and control technology and is expected to expand the scope of application.Future work will focus on optimizing performance and developing applications.展开更多
Enantiomer identification is of paramount industrial value and physiological significance.Construction of sensitive chiral sensors with high enantiomeric discrimination ability is highly desirable.In this work,a chira...Enantiomer identification is of paramount industrial value and physiological significance.Construction of sensitive chiral sensors with high enantiomeric discrimination ability is highly desirable.In this work,a chiral covalent organic framework/anodic aluminum oxide(c-COF/AAO)membrane was prepared for electrochemical enantioselective recognition and sensing.Benefiting from the remarkable asymmetry,the asprepared nanofluidic c-COF/AAO presents a distinct ion current rectification(ICR)characteristic,enabling sensitive bioanalysis.In addition,owing to the large surface area,high chemical stability and perfect ion selectivity of chiral COF,the prepared c-COF/AAO membrane presents exceptionally selective mass transport and thereby enables excellent chiral discrimination for S-/R-Naproxen(S-/R-Npx)enantiomers.It is especially noteworthy that the detection limit is achieved as low as 3.88 pmol/L.These results raise the possibility for a facile,stable and low-cost method to carry out sensitive enantioselective recognition and detection.展开更多
Thermal diodes,based on the thermal rectification effect,have demonstrated great promise for advanced thermal management.In previous studies,almost all thermal diodes were discussed under the condition of steady state...Thermal diodes,based on the thermal rectification effect,have demonstrated great promise for advanced thermal management.In previous studies,almost all thermal diodes were discussed under the condition of steady states,while the heat source of a practical thermal system often operates under dynamically fluctuating temperatures.Therefore,in this work,we employ finite element simulation to investigate transient thermal rectification behaviors in a well-built heterojunction which exhibits intrinsic thermal rectification effect under steady state.Unidirectional energy transport in the heterojunction system,decoupled from the steady-state temperature bias,is observed under a time-dependent fluctuating heat source.This phenomenon enables straightforward realization of both giant thermal rectification and negative thermal transport.Furthermore,a series of novel thermal regulation strategies are unveiled by adjusting the average temperature,frequency,and phase of the heat source.Our work not only deepens fundamental understanding of thermal regulation in time-dependent oscillating temperature systems but also uncovers many unexplored energy-saving thermal management strategies.展开更多
A rapid and simple liquid chromatography method with on-line solid phase extraction was developed and validated for the quantitative determination of cyclophosphamide in rat plasma.The plasma sample was first extracte...A rapid and simple liquid chromatography method with on-line solid phase extraction was developed and validated for the quantitative determination of cyclophosphamide in rat plasma.The plasma sample was first extracted on an Acclaim？ Polar Advantage II C18 guard column（PA II C18,10 mm×4.6 mm,5 μm）,which was also the on-line Extraction Cartridge SPE column,by washing with 100% H2O for 1 min.The extracted sample was then eluted onto a PA II C18 column（150 mm×4.6 mm,5 μm） and separated by isocratic elution with acetonitrile-water（40：60,v/v）.The mobile phase was run at a flow rate of 1.0 mL/min,and the UV detector was set at 195 nm.Retention time of cyclophosphamide was 4.3 min and the total run-time was 6 min.The linear range of the standard curve was from 1.0 to 200 μg/mL（r2 = 0.9999）,and the limits of quantification and detection were 1.0 μg/mL（RSD10%,n = 5） and 0.3 μg/mL（RSD13%,n = 5）,respectively.Both intra-and inter-day variations were less than 5.6%.The developed method can be used for the therapeutic drug monitoring of cyclophosphamide in the clinic.展开更多
The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sens...The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.展开更多
The corrosion resistance of Al？Zn？Mg alloy subjected to different times in flame rectification was investigated based on the exfoliation corrosion test. The results indicate that the flame rectification deteriorate...The corrosion resistance of Al？Zn？Mg alloy subjected to different times in flame rectification was investigated based on the exfoliation corrosion test. The results indicate that the flame rectification deteriorates the exfoliation corrosion resistance of Al？Zn？Mg alloy. The corrosion resistance of Al-Zn-Mg alloy is ranked in the following order： base metal〉two times〉three times〉one time of flame rectification. The exfoliation corrosion behavior was discussed based on the transformation of precipitates at grain boundaries and matrix. With increasing the number of times in flame rectification, the precipitate-free zones disappeared and the precipitates experienced dissolution and re-precipitation. The sample was seriously corroded after one time of flame rectification, because the precipitates at grain boundaries are more continuous than those in other samples.展开更多
This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current te...This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.展开更多
The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through...The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through on-line solution and off-line aging treatment but decreases after off-line solution treatment. By X-ray diffractometry, optical microscopy, differential thermal analysis, scanning electron microscopy and X-ray energy dispersive spectroscopy, it is found that the microstructures of the die-cast AZ91D magnesium alloy before and after on-line solution and off-line aging are similar, consisting of α-Mg and β-Al12Mg17. The precipitation of Al element is prevented by on-line solution so that the effect of solid solution strengthening is enhanced. The β-Al12Mg17 phases precipitate from supersaturated Mg solid solution after off-line aging treatment, and lead to microstructure refinement of AZ91D alloy, so the effect of precipitation hardening is enhanced. The β-Al12Mg17 phases dissolve in the substructure after off-line solution treatment, which leads to that the grain boundary strengthening phase is reduced significantly and the hardness of die cast AZ91D is reduced.展开更多
We have developed an on-line detection method using acridine orange as the fluorescence probe and applied this method to rapidly identify active compounds in herbal medicines. This on-line method was equipped with a h...We have developed an on-line detection method using acridine orange as the fluorescence probe and applied this method to rapidly identify active compounds in herbal medicines. This on-line method was equipped with a high-performance liquid chromatography tandem diode array detector, electrospray ionization-ion-trap time-of-flight mass spectrometry and DNA- acridine orange fluorescence detection （HPLC-DAD-MSn-DNA-AO-FLD）. A large amount of information could be simultaneously obtained during one run, which included HPLC fingerprint, ultraviolet spectra, total ion chromatograms, MSn data of high-resolution mass spectrometry and activity profile of each compound binding with DNA. The method also provided information on structureactivity relationships and mechanism of interaction. We used this on-line method to identify five DNA-binding activity components from Lithospermum erythrorhizon sample for the first time. The result showed that the parent nucleus of shikonin derivatives could bind with DNA. The structure-activity relationship showed that the parent nucleus of shikonin derivatives plays a major role in DNA binding, not the carboxyl group on the side chain. This simple, rapid, high precision and good stability on-line method should be useful for compound separation, structural identification and screening of DNA-binding compounds in herbal medicines.展开更多
A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The te...A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant No.12364008)the Ph.D.Research Startup Foundation of Yan’an University(Grant No.YDBK2019-54)the Yan’an High-level Talent Special Project(Grant No.2019263166)。
文摘Pursuing significant thermal rectification effect with minimal temperature differences is critical for thermal rectifiers.While asymmetric structures enable spectral matching,they inherently limit thermal rectification performance.To address this issue,we developed a thermal rectification structure comprising a current-biased graphene-coated silicon carbide(SiC)substrate paired with another graphene-coated SiC substrate separated by a nanoscale vacuum gap.A current-biased graphene sheet generates nonreciprocal effect that actively modulates radiative energy transfer.Our theoretical framework demonstrates that the current-biased graphene achieves a high thermal diode efficiency even under a modest temperature difference.Remarkably,the thermal diode efficiency exceeds 0.8 at a temperature difference of just 100 K(between 300 K and 400 K).These findings highlight the synergistic enhancement from graphene coatings and current biasing,providing a viable strategy for nanoscale thermal management applications.
基金supported by the National Natural Science Foundation of China(Grant No.52476071)the Natural Science Foundation of Hebei Province(Grant No.A2024502008).
文摘Carbon nanotubes(CNTs)are widely used in various fields owing to their unique properties.In this study,three different types of nitrogen-doped CNT heterojunctions were constructed:parallel-doped(PCNT),vertically doped(VCNT),and mesh-doped(MCNT).Non-equilibrium molecular dynamics(NEMD)simulations were conducted to investigate their heat flux and thermal rectification(TR)effects.The results show that heat flux preferentially flows from nitrogen-doped regions to undoped regions,exhibiting distinct thermal rectification behavior,with PCNT showing the most pronounced effect.Interestingly,the TR ratio of the zigzag PCNT is significantly higher than that of the armchair PCNT.Subsequently,we examined the effects of system length and diameter on the TR ratio of the PCNT and found that the TR ratio increases and then decreases with increasing model length.In addition,the effect of defect density on the heat flux of the PCNT is peculiar.The phonon density of states,phonon dispersion,participation ratio,and phonon spectral heat flux were analyzed to elucidate the thermal transport behavior of phonons in the nanotubes.This study provides insights into the development and design of nitrogen-doped CNT thermal rectifiers.
基金supported in part by the National Natural Science Foundation of China under Grant 52205075in part by the Zhejiang Provincial Natural Science Foundation of China,under Grant LZ24E050008National Undergraduate Training Program on Innovation and Entrepreneurship,under Grant 202410345040.
文摘A mass on-line control type impact inertial piezoelectric actuator with a bionic wheat structure is proposed in this work.Inspired by the anisotropic friction mechanism of natural wheat awns,a bioinspired mechanism is used to achieve the designed driving strategy based on the asymmetric-mass control method that mimics bidirectional motion characteristics of wheat awn.A lumped parameter theoretical model is established,and the numerical simulation results have verified the designed bionic working principle and revealed the key system parameters.Experimental results show that the prototype has the bi-directional motion ability inherited from anisotropic friction of wheat awn,with theoretically infinite stroke and can easily obtain the required step displacement and velocity by conveniently adjusting the voltage.It can achieve a resolution of 0.7μm,and a forward and backward maximum velocity of 12.7μm/s and 90.72μm/s respectively.In addition,the actuator also has the advantages of good stability,control convenience,and ease of integration.Besides,the actuator is capable of adjusting motion direction via voltage,providing a significant advantage in precise bidirectional control.This study confirms that the proposed mass on-line control type actuator embodies a successful bionic translation from plant morphology to precision engineering,and adds a new member to the family of impact inertial piezoelectric actuators,which completes the last piece of the puzzle for the impact inertial driving mechanism.It promotes the further development of inertial precision driving and control technology and is expected to expand the scope of application.Future work will focus on optimizing performance and developing applications.
基金supported by grants from the National Natural Science Foundation of China(Nos.22274076,22304084)the Primary Research&Development Plan of Jiangsu Province(No.BE2022793)+1 种基金the Natural Science Foundation of Jiangsu Province of China(No.BK20230377)Jiangsu Provincial Department of Education(No.211090B52303)。
文摘Enantiomer identification is of paramount industrial value and physiological significance.Construction of sensitive chiral sensors with high enantiomeric discrimination ability is highly desirable.In this work,a chiral covalent organic framework/anodic aluminum oxide(c-COF/AAO)membrane was prepared for electrochemical enantioselective recognition and sensing.Benefiting from the remarkable asymmetry,the asprepared nanofluidic c-COF/AAO presents a distinct ion current rectification(ICR)characteristic,enabling sensitive bioanalysis.In addition,owing to the large surface area,high chemical stability and perfect ion selectivity of chiral COF,the prepared c-COF/AAO membrane presents exceptionally selective mass transport and thereby enables excellent chiral discrimination for S-/R-Naproxen(S-/R-Npx)enantiomers.It is especially noteworthy that the detection limit is achieved as low as 3.88 pmol/L.These results raise the possibility for a facile,stable and low-cost method to carry out sensitive enantioselective recognition and detection.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFA1407001)Department of Science and Technology of Jiangsu Province(Grant No.BK20220032)。
文摘Thermal diodes,based on the thermal rectification effect,have demonstrated great promise for advanced thermal management.In previous studies,almost all thermal diodes were discussed under the condition of steady states,while the heat source of a practical thermal system often operates under dynamically fluctuating temperatures.Therefore,in this work,we employ finite element simulation to investigate transient thermal rectification behaviors in a well-built heterojunction which exhibits intrinsic thermal rectification effect under steady state.Unidirectional energy transport in the heterojunction system,decoupled from the steady-state temperature bias,is observed under a time-dependent fluctuating heat source.This phenomenon enables straightforward realization of both giant thermal rectification and negative thermal transport.Furthermore,a series of novel thermal regulation strategies are unveiled by adjusting the average temperature,frequency,and phase of the heat source.Our work not only deepens fundamental understanding of thermal regulation in time-dependent oscillating temperature systems but also uncovers many unexplored energy-saving thermal management strategies.
基金National Natural Science Foundation of China(Grant No.81072612)the Natural Science Foundation of Beijing(Grant No.7102107)+1 种基金the Open Foundation of State Key Laboratory of Natural and Biomimetic Drugs(Grant No.K20110109)Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20110001110021)
文摘A rapid and simple liquid chromatography method with on-line solid phase extraction was developed and validated for the quantitative determination of cyclophosphamide in rat plasma.The plasma sample was first extracted on an Acclaim？ Polar Advantage II C18 guard column（PA II C18,10 mm×4.6 mm,5 μm）,which was also the on-line Extraction Cartridge SPE column,by washing with 100% H2O for 1 min.The extracted sample was then eluted onto a PA II C18 column（150 mm×4.6 mm,5 μm） and separated by isocratic elution with acetonitrile-water（40：60,v/v）.The mobile phase was run at a flow rate of 1.0 mL/min,and the UV detector was set at 195 nm.Retention time of cyclophosphamide was 4.3 min and the total run-time was 6 min.The linear range of the standard curve was from 1.0 to 200 μg/mL（r2 = 0.9999）,and the limits of quantification and detection were 1.0 μg/mL（RSD10%,n = 5） and 0.3 μg/mL（RSD13%,n = 5）,respectively.Both intra-and inter-day variations were less than 5.6%.The developed method can be used for the therapeutic drug monitoring of cyclophosphamide in the clinic.
文摘The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.
基金Projects(51374048,50904012)supported by the National Natural Science Foundation of China
文摘The corrosion resistance of Al？Zn？Mg alloy subjected to different times in flame rectification was investigated based on the exfoliation corrosion test. The results indicate that the flame rectification deteriorates the exfoliation corrosion resistance of Al？Zn？Mg alloy. The corrosion resistance of Al-Zn-Mg alloy is ranked in the following order： base metal〉two times〉three times〉one time of flame rectification. The exfoliation corrosion behavior was discussed based on the transformation of precipitates at grain boundaries and matrix. With increasing the number of times in flame rectification, the precipitate-free zones disappeared and the precipitates experienced dissolution and re-precipitation. The sample was seriously corroded after one time of flame rectification, because the precipitates at grain boundaries are more continuous than those in other samples.
文摘This paper introduces the development and industrial application of an on-line corrosion monitoring device for condenser tubes. Corrosion sensors are made up of representative condenser tubes chosen by eddy current test, which enable the monitoring result to be consistent with the corrosion of actual condenser tubes. Localized corrosion rate of condenser tubes can be measured indirectly by a galvanic couple made up of tube segments with and without pits. Using this technology, corrosion problems can be found in time and accurately, and anticorrosive measures be made more economic and effective. Applications in two power plants showed the corrosion measurements are fast and accurate.
基金Projects (2011BAE22B01, 2011BAE22B06) supported by the National Key Technologies R&D Program During the 12th Five-Year Plan Period of ChinaProject (2010NC018) supported by the Innovation Fund of Inner Mongolia University of Science and Technology, China
文摘The effects of on-line solution, off-line solution and aging heat treatment on the microstructure and hardness of the die-cast AZ91D alloys were investigated. Brinell hardness of die-cast AZ91D alloy increases through on-line solution and off-line aging treatment but decreases after off-line solution treatment. By X-ray diffractometry, optical microscopy, differential thermal analysis, scanning electron microscopy and X-ray energy dispersive spectroscopy, it is found that the microstructures of the die-cast AZ91D magnesium alloy before and after on-line solution and off-line aging are similar, consisting of α-Mg and β-Al12Mg17. The precipitation of Al element is prevented by on-line solution so that the effect of solid solution strengthening is enhanced. The β-Al12Mg17 phases precipitate from supersaturated Mg solid solution after off-line aging treatment, and lead to microstructure refinement of AZ91D alloy, so the effect of precipitation hardening is enhanced. The β-Al12Mg17 phases dissolve in the substructure after off-line solution treatment, which leads to that the grain boundary strengthening phase is reduced significantly and the hardness of die cast AZ91D is reduced.
基金Peking University Comprehensive Platform for Innovative Drug Research and Development(Grant No.2009ZX--09301--010)
文摘We have developed an on-line detection method using acridine orange as the fluorescence probe and applied this method to rapidly identify active compounds in herbal medicines. This on-line method was equipped with a high-performance liquid chromatography tandem diode array detector, electrospray ionization-ion-trap time-of-flight mass spectrometry and DNA- acridine orange fluorescence detection （HPLC-DAD-MSn-DNA-AO-FLD）. A large amount of information could be simultaneously obtained during one run, which included HPLC fingerprint, ultraviolet spectra, total ion chromatograms, MSn data of high-resolution mass spectrometry and activity profile of each compound binding with DNA. The method also provided information on structureactivity relationships and mechanism of interaction. We used this on-line method to identify five DNA-binding activity components from Lithospermum erythrorhizon sample for the first time. The result showed that the parent nucleus of shikonin derivatives could bind with DNA. The structure-activity relationship showed that the parent nucleus of shikonin derivatives plays a major role in DNA binding, not the carboxyl group on the side chain. This simple, rapid, high precision and good stability on-line method should be useful for compound separation, structural identification and screening of DNA-binding compounds in herbal medicines.
文摘A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.
