This paper presents a high-fidelity lumpedparameter(LP)thermal model(HF-LPTM)for permanent magnet synchronous machines(PMSMs)in electric vehicle(EV)applications,where various cooling techniques are considered,includin...This paper presents a high-fidelity lumpedparameter(LP)thermal model(HF-LPTM)for permanent magnet synchronous machines(PMSMs)in electric vehicle(EV)applications,where various cooling techniques are considered,including frame forced air/liquid cooling,oil jet cooling for endwinding,and rotor shaft cooling.To address the temperature misestimation in the LP thermal modelling due to assumptions of concentrated loss input and uniform heat flows,the developed HF-LPTM introduces two compensation thermal resistances for the winding and PM components,which are analytically derived from the multi-dimensional heat transfer equations and are robust against different load/thermal conditions.As validated by the finite element analysis method and experiments,the conventional LPTMs exhibit significant winding temperature deviations,while the proposed HF-LPTM can accurately predict both the midpoint and average temperatures.The developed HFLPTM is further used to assess the effectiveness of various cooling techniques under different scenarios,i.e.,steady-state thermal states under the rated load condition,and transient temperature profiles under city,freeway,and hybrid(city+freeway)driving cycles.Results indicate that no single cooling technique can maintain both winding and PM temperatures within safety limits.The combination of frame liquid cooling and oil jet cooling for end winding can sufficiently mitigate PMSM thermal stress in EV applications.展开更多
Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch ...Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.展开更多
Object-oriented Petri nets (OPNs) is extended into stochastic object-oriented Petri nets (SOPNs) by associating the OPN of an object with stochastic transitions and introducing stochastic places. The stochastic transi...Object-oriented Petri nets (OPNs) is extended into stochastic object-oriented Petri nets (SOPNs) by associating the OPN of an object with stochastic transitions and introducing stochastic places. The stochastic transition of the SOPNs of a production resources can be used to model its reliability, while the SOPN of a production resource can describe its performance with reliability considered. The SOPN model of a case production system is built to illustrate the relationship between the system's performances and the failures of individual production resources.展开更多
BACKGROUND Postoperative delirium,particularly prevalent in elderly patients after abdominal cancer surgery,presents significant challenges in clinical management.AIM To develop a synthetic minority oversampling techn...BACKGROUND Postoperative delirium,particularly prevalent in elderly patients after abdominal cancer surgery,presents significant challenges in clinical management.AIM To develop a synthetic minority oversampling technique(SMOTE)-based model for predicting postoperative delirium in elderly abdominal cancer patients.METHODS In this retrospective cohort study,we analyzed data from 611 elderly patients who underwent abdominal malignant tumor surgery at our hospital between September 2020 and October 2022.The incidence of postoperative delirium was recorded for 7 d post-surgery.Patients were divided into delirium and non-delirium groups based on the occurrence of postoperative delirium or not.A multivariate logistic regression model was used to identify risk factors and develop a predictive model for postoperative delirium.The SMOTE technique was applied to enhance the model by oversampling the delirium cases.The model’s predictive accuracy was then validated.RESULTS In our study involving 611 elderly patients with abdominal malignant tumors,multivariate logistic regression analysis identified significant risk factors for postoperative delirium.These included the Charlson comorbidity index,American Society of Anesthesiologists classification,history of cerebrovascular disease,surgical duration,perioperative blood transfusion,and postoperative pain score.The incidence rate of postoperative delirium in our study was 22.91%.The original predictive model(P1)exhibited an area under the receiver operating characteristic curve of 0.862.In comparison,the SMOTE-based logistic early warning model(P2),which utilized the SMOTE oversampling algorithm,showed a slightly lower but comparable area under the curve of 0.856,suggesting no significant difference in performance between the two predictive approaches.CONCLUSION This study confirms that the SMOTE-enhanced predictive model for postoperative delirium in elderly abdominal tumor patients shows performance equivalent to that of traditional methods,effectively addressing data imbalance.展开更多
A sauna drying technique—the solar drier was designed and imposed, constructed and tested for drying of seaweed. The seaweed moisture content was decreased around 50% in 2-day sauna. Kinetic curves of drying of seawe...A sauna drying technique—the solar drier was designed and imposed, constructed and tested for drying of seaweed. The seaweed moisture content was decreased around 50% in 2-day sauna. Kinetic curves of drying of seaweed were known to be used in this system. The non-linear regression procedure was used to fit three different drying models. The models were compared with experimental data of red seaweed being dried on the daily average of air temperature about 40℃. The fit quality of the models was evaluated using the coefficient of determination (R2), Mean Bias Error (MBE) and Root Mean Square Error (RMSE). The highest values of R2 (0.99027), the lowest MBE (0.00044) and RMSE (0.03039) indicated that the Page model was the best mathematical model to describe the drying behavior of sauna dried seaweed. The percentage of the saved time using this technique was calculated at 57.9% on the average solar radiation of about 500 W/m2 and air flow rate of 0.056 kg/s.展开更多
Concept of black box, condition of modeling and control methods were introduced. Taking high purity silica brick as an example, the silica brick featured with high purity, low porosity, low true density and high stren...Concept of black box, condition of modeling and control methods were introduced. Taking high purity silica brick as an example, the silica brick featured with high purity, low porosity, low true density and high strength was developed through problem analysis, test design, modeling and optimization. Using information technology to upgrade refractories industry was discussed.展开更多
Automated operation and artificial intelligence technology have become essential for ensuring the safety, efficiency, and punctuality of railways, with applications such as ATO (Automatic Train Operation). In this stu...Automated operation and artificial intelligence technology have become essential for ensuring the safety, efficiency, and punctuality of railways, with applications such as ATO (Automatic Train Operation). In this study, the authors propose a method to efficiently simulate the kinematic characteristics of railroad vehicles depending on their speed zone. They utilized the function overloading function supported by a programming language and applied the fourth-order Lunge-Kutta method for dynamic simulation. By constructing an object model, the authors calculated vehicle characteristics and TPS and compared them with actual values, verifying that the developed model represents the real-life vehicle characteristics accurately. The study highlights potential improvements in automated driving and energy consumption optimization in the railway industry.展开更多
This Special Issue of the Journal of Rock Mechanics and GeotechnicalEngineering （JRMGE） contains 13 papers prepared by internationalexperts on various general topics in geomechanics, rockmechanics and geotechnical e...This Special Issue of the Journal of Rock Mechanics and GeotechnicalEngineering （JRMGE） contains 13 papers prepared by internationalexperts on various general topics in geomechanics, rockmechanics and geotechnical engineering. It represents a usefulmix of theoretical developments, testing and practical applications.We present in the following brief details in the papers, alphabeticallyin accordance with the last name of the first author.Barla presents a review of tunneling techniques with emphasison the full-face method combining full-face excavation and facereinforcement by means of fiber-glass elements with a yieldcontrolsupport. This method has been used successfully in difficultgeologic conditions, and for a wide spectrum of ground situations.The validation of the method with respect to the Saint Martin LaPorte access adit along the LyoneTurin Base tunnel experiencingseverely squeezing conditions during excavation is also includedin the paper. The numerical modeling with consideration of therock mass time-dependent behavior showed a satisfactory agreementwith monitoring results.展开更多
Virtual assembly is a Virtual Reality (VR) based engineering application which allows engineers to evaluate, analyze, and plan the assembly of mechanical systems. To model the virtual assembly process, new methodology...Virtual assembly is a Virtual Reality (VR) based engineering application which allows engineers to evaluate, analyze, and plan the assembly of mechanical systems. To model the virtual assembly process, new methodology must be applied. Based on the idea that the virtual assembly system is an event driven system, the interactive behavior and information model is proposed to describe the dynamic process of virtual assembly. Definition of the object-oriented model of virtual assembly is put forward.展开更多
In the field of computer graphics, procedural modeling has proven useful for the generation of models of complex realistic objects and environment. In this paper, we present something about the procedural techniques a...In the field of computer graphics, procedural modeling has proven useful for the generation of models of complex realistic objects and environment. In this paper, we present something about the procedural techniques and its application on city modeling.展开更多
BACKGROUND Clinically,tracheoesophageal fistula(TEF)is lack of effective surgical strategies.One reason is due to the lack of appropriate animal models of acquired TEF,which is usually complex and difficult.Recently,t...BACKGROUND Clinically,tracheoesophageal fistula(TEF)is lack of effective surgical strategies.One reason is due to the lack of appropriate animal models of acquired TEF,which is usually complex and difficult.Recently,the magnetic compression technique has been applied for digestive tract anastomosis or vascular anastomosis in animals.In this study,an animal model of TEF in dogs was developed by using the magnetic compression technique,hoping to provide a new method for mimicking TEF.AIM To establish a TEF model in dogs by using the magnetic compression technique.METHODS Six male beagles were used as models with two Nd-Fe-B permanent magnets for TEF.The parent magnet and the daughter magnet were placed in the cervical esophagus and trachea,respectively.The anterior wall of the esophagus and the posterior wall of the trachea were compressed when the two magnets coupled.After 4-6 d,the necrotic tissue between the two magnets fell off and the parent and daughter magnets disengaged from the target location,leaving a fistula.Gastroscopy/bronchoscopy,upper gastrointestinal contrast study,and histological analysis were performed.RESULTS The establishment of the TEF model in all six beagles was successful.The average time of magnet placement was 4.33±1.11 min(range,3-7 min).Mean time for the magnets to disengage from the target location was 4.67±0.75 d(range,4-6 d).TEFs were observed by gastroscopy/bronchoscopy and esophageal angiography.The gross anatomical structure of the esophagus and the trachea was in good condition.There was no esophageal mucosa or pseudostratified ciliated columnar epithelium at the site of the fistula according to histological analysis.CONCLUSION It is simple,feasible,and minimally invasive to use the magnetic compression technique for the establishment of the TEF model in dogs.展开更多
Korean larch(Larix olgensis)is one of the main tree species for aff orestation and timber production in northeast China.However,its timber quality and growth ability are largely infl uenced by crown size,structure and...Korean larch(Larix olgensis)is one of the main tree species for aff orestation and timber production in northeast China.However,its timber quality and growth ability are largely infl uenced by crown size,structure and shape.The majority of crown models are static models based on tree size and stand characteristics from temporary sample plots,but crown dynamic models has seldom been constructed.Therefore,this study aimed to develop height to crown base(HCB)and crown length(CL)dynamic models using the branch mortality technique for a Korean larch plantation.The nonlinear mixed-eff ects model with random eff ects,variance functions and correlation structures,was used to build HCB and CL dynamic models.The data were obtained from 95 sample trees of 19 plots in Meng JiaGang forest farm in Northeast China.The results showed that HCB progressively increases as tree age,tree height growth(HT growth)and diameter at breast height growth(DBH growth).The CL was increased with tree age in 20 years ago,and subsequently stabilized.HT growth,DBH growth stand basal area(BAS)and crown competition factor(CCF)signifi cantly infl uenced HCB and CL.The HCB was positively correlated with BAS,HT growth and DBH growth,but negatively correlated with CCF.The CL was positively correlated with BAS and CCF,but negatively correlated with DBH growth.Model fi tting and validation confi rmed that the mixed-eff ects model considering the stand and tree level random eff ects was accurate and reliable for predicting the HCB and CL dynamics.However,the models involving adding variance functions and time series correlation structure could not completely remove heterogeneity and autocorrelation,and the fi tting precision of the models was reduced.Therefore,from the point of view of application,we should take care to avoid setting up over-complex models.The HCB and CL dynamic models in our study may also be incorporated into stand growth and yield model systems in China.展开更多
In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled ＂passively-truncated ＋ numerical-simulation＂ type of hybrid model testing technique while the tn...In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled ＂passively-truncated ＋ numerical-simulation＂ type of hybrid model testing technique while the tnmcated water depth is 160 m and the model scale ）, = 80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the tnmcated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodyrmmic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.展开更多
The essential features of the nonlinear stochastic models are positivity,dynamical consistency and boundedness.These features have a significant role in different fields of computational biology and many more.The aim ...The essential features of the nonlinear stochastic models are positivity,dynamical consistency and boundedness.These features have a significant role in different fields of computational biology and many more.The aim of our paper,to achieve the comparison analysis of the stochastic susceptible,infected recovered epidemic model.The stochastic modelling is a realistic way to study the dynamics of compartmental modelling as compared to deterministic modelling.The effect of reproduction number has also observed in the stochastic susceptible,infected recovered epidemic model.For comparison analysis,we developed some explicit stochastic techniques,but they are the time-dependent techniques.The implicitly driven explicit technique has developed for the stochastic susceptible,infected recovered epidemic model.In the support,some theorems and graphical illustration has presented.Also,the time efficiency of this method makes it easy to find the solution of the stochastic system.The comparison with other techniques shows the efficacy and reliability of the designed technique.展开更多
Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive cont...Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.展开更多
A numerical model has been developed to simulate the transport and fate of oil spilled at sea. The model combines the transport and fate processes of spilled oil with the random walk technique. Oil movement under th...A numerical model has been developed to simulate the transport and fate of oil spilled at sea. The model combines the transport and fate processes of spilled oil with the random walk technique. Oil movement under the influence of tidal currents, wind driven currents, and turbulent eddies is simulated by the PLUME RW dispersion model developed by HR Wallingford. The weathering processes in the model represent physical and chemical changes of soil slicks with time, and comprise mechanical spreading, dispersion, evaporation and emulsification. Shoreline stranding is determined approximately using a capacity method for different shoreline types. This paper presents details of the model, and describe the results of various sensitivity tests. The model is suitable for oil spill contingency planning.展开更多
In this paper, to investigate the influence of soil inhomogeneity on the bending of circular thinplates on elastic foundations, the static problem of circular thin plates on Gibson elasticfoundation is solved using an...In this paper, to investigate the influence of soil inhomogeneity on the bending of circular thinplates on elastic foundations, the static problem of circular thin plates on Gibson elasticfoundation is solved using an iterative method based on the modified Vlasov model. On the basisof the principle of minimum potential energy, the governing differential equations and boundaryconditions for circular thin plates on modified Vlasov foundation considering the characteristics ofGibson soil are derived. The equations for the attenuation parameter in bending problem are alsoobtained, and the issue of unknown parameters being difficult to determine is solved using theiterative method. Numerical examples are analyzed and the results are in good agreement withthose form other literatures. It proves that the method is practical and accurate. Theinhomogeneity of modified Vlasov foundations has some influence on the deformation andinternal force behavior of circular thin plates. The effects of various parameters on the bending ofcircular plates and characteristic parameters of the foundation are discussed. The modified modelfurther enriches and develops the elastic foundations. Relevant conclusions that are meaningful toengineering practice are drawn.展开更多
Modelica-based object-orient method is proved to be rapid, accurate and easy to modify, which is suitable for prototype modeling and simulation of rotor system, whose parameters need to be modified frequently. Classic...Modelica-based object-orient method is proved to be rapid, accurate and easy to modify, which is suitable for prototype modeling and simulation of rotor system, whose parameters need to be modified frequently. Classical non-object-orient method appears to be inefficient because the code is difficult to modify and reuse. An adequate library for object-orient modeling of rotor system with multi-faults is established, a comparison with non-object-orient method on Jeffcott rotor system and a case study on turbo expander with multi-faults are implemented. The relative tolerance between object-orient method and non-object-orient is less than 0.03%, which proves that these two methods are as accurate as each other. Object-orient modeling and simulation is implemented on turbo expander with crack, rub-impact, pedestal looseness and multi-faults simultaneously. It can be conclude from the case study that when acting on compress side of turbo expander separately, expand wheel is not influenced greatly by crack fault, the existence of rub-impact fault forces expand wheel into quasi-periodic motion and the orbit of expand wheel is deformed and enhanced almost 1.5 times due to pedestal looseness. When acting simultaneously, multi-faults cannot be totally decomposed but can be diagnosed from the feature of vibration. Object-orient method can enhance the efficiency of modeling and simulation of rotor system with multi-faults, which provides an efficient method on prototype modeling and simulation.展开更多
Pneumonia is a highly transmissible disease in children.According to the World Health Organization(WHO),the most affected regions include south Asia and sub-Saharan Africa.Worldwide,15%of pediatric deaths can be attri...Pneumonia is a highly transmissible disease in children.According to the World Health Organization(WHO),the most affected regions include south Asia and sub-Saharan Africa.Worldwide,15%of pediatric deaths can be attributed to pneumonia.Computing techniques have a significant role in science,engineering,and many other fields.In this study,we focused on the efficiency of numerical techniques via computer programs.We studied the dynamics of the pneumonia-like infections of epidemic models using numerical techniques.We discuss two types of analysis:dynamical and numerical.The dynamical analysis included positivity,boundedness,local stability,reproduction number,and equilibria of the model.We also discusswell-known computing techniques including Euler,Runge Kutta,and non-standard finite difference(NSFD)for the model.The non-standard finite difference(NSFD)technique shows convergence to the true equilibrium points of the model for any time step size.However,Euler and Runge Kutta do not work well over large time intervals.Computing techniques are the suitable tool for crosschecking the theoretical analysis of the model.展开更多
文摘This paper presents a high-fidelity lumpedparameter(LP)thermal model(HF-LPTM)for permanent magnet synchronous machines(PMSMs)in electric vehicle(EV)applications,where various cooling techniques are considered,including frame forced air/liquid cooling,oil jet cooling for endwinding,and rotor shaft cooling.To address the temperature misestimation in the LP thermal modelling due to assumptions of concentrated loss input and uniform heat flows,the developed HF-LPTM introduces two compensation thermal resistances for the winding and PM components,which are analytically derived from the multi-dimensional heat transfer equations and are robust against different load/thermal conditions.As validated by the finite element analysis method and experiments,the conventional LPTMs exhibit significant winding temperature deviations,while the proposed HF-LPTM can accurately predict both the midpoint and average temperatures.The developed HFLPTM is further used to assess the effectiveness of various cooling techniques under different scenarios,i.e.,steady-state thermal states under the rated load condition,and transient temperature profiles under city,freeway,and hybrid(city+freeway)driving cycles.Results indicate that no single cooling technique can maintain both winding and PM temperatures within safety limits.The combination of frame liquid cooling and oil jet cooling for end winding can sufficiently mitigate PMSM thermal stress in EV applications.
基金supported by National Natural Science Foundation of China (Grant No. 60873003)
文摘Recently automotive nets are adopted to solve increasing problems in automotive electronic systems.Technologies of automotive local area network from CAN and LIN can solve the problems of the increasing of wire bunch weight and lack in module installation space.However,the multilayer automotive nets software becomes more and more complex,and the development expense is difficult to predict and to keep in check.In this paper,the modeling method of hierarchical automotive nets and the substitution operation based on object-oriented colored Petri net(OOCPN) are proposed.The OOCPN model which analyzes the software structure and validates the collision mechanism of CAN/LIN bus can speed the automobile system development.First,the subsystems are divided and modeled by object-oriented Petri net(OOPN).According to the sets of message sharing relations,the message ports among them are set and the communication gate transitions are defined.Second,the OOPN model is substituted step by step until the inner objects in the automotive body control modules(BCM) are indivisible and colored by colored Petri net(CPN).And the color subsets mark the node messages for the collision mechanism.Third,the OOCPN model of the automotive body CAN/LIN nets is assembled,which keeps the message sets and the system can be expanded.The proposed model is used to analyze features of information sharing among the objects,and it is also used to describe each subsystem real-time behavior of processing messages and implemental device controllers operating,and puts forward a reasonable software framework for the automotive body control subsystem.The research can help to design the communication model in the automotive body system effectively and provide a convenient and rapid way for developing the logical hierarchy software.
基金This project is supported by National Natural Science Foundation of China (No.50085003).
文摘Object-oriented Petri nets (OPNs) is extended into stochastic object-oriented Petri nets (SOPNs) by associating the OPN of an object with stochastic transitions and introducing stochastic places. The stochastic transition of the SOPNs of a production resources can be used to model its reliability, while the SOPN of a production resource can describe its performance with reliability considered. The SOPN model of a case production system is built to illustrate the relationship between the system's performances and the failures of individual production resources.
基金Supported by Discipline Advancement Program of Shanghai Fourth People’s Hospital,No.SY-XKZT-2020-2013.
文摘BACKGROUND Postoperative delirium,particularly prevalent in elderly patients after abdominal cancer surgery,presents significant challenges in clinical management.AIM To develop a synthetic minority oversampling technique(SMOTE)-based model for predicting postoperative delirium in elderly abdominal cancer patients.METHODS In this retrospective cohort study,we analyzed data from 611 elderly patients who underwent abdominal malignant tumor surgery at our hospital between September 2020 and October 2022.The incidence of postoperative delirium was recorded for 7 d post-surgery.Patients were divided into delirium and non-delirium groups based on the occurrence of postoperative delirium or not.A multivariate logistic regression model was used to identify risk factors and develop a predictive model for postoperative delirium.The SMOTE technique was applied to enhance the model by oversampling the delirium cases.The model’s predictive accuracy was then validated.RESULTS In our study involving 611 elderly patients with abdominal malignant tumors,multivariate logistic regression analysis identified significant risk factors for postoperative delirium.These included the Charlson comorbidity index,American Society of Anesthesiologists classification,history of cerebrovascular disease,surgical duration,perioperative blood transfusion,and postoperative pain score.The incidence rate of postoperative delirium in our study was 22.91%.The original predictive model(P1)exhibited an area under the receiver operating characteristic curve of 0.862.In comparison,the SMOTE-based logistic early warning model(P2),which utilized the SMOTE oversampling algorithm,showed a slightly lower but comparable area under the curve of 0.856,suggesting no significant difference in performance between the two predictive approaches.CONCLUSION This study confirms that the SMOTE-enhanced predictive model for postoperative delirium in elderly abdominal tumor patients shows performance equivalent to that of traditional methods,effectively addressing data imbalance.
文摘A sauna drying technique—the solar drier was designed and imposed, constructed and tested for drying of seaweed. The seaweed moisture content was decreased around 50% in 2-day sauna. Kinetic curves of drying of seaweed were known to be used in this system. The non-linear regression procedure was used to fit three different drying models. The models were compared with experimental data of red seaweed being dried on the daily average of air temperature about 40℃. The fit quality of the models was evaluated using the coefficient of determination (R2), Mean Bias Error (MBE) and Root Mean Square Error (RMSE). The highest values of R2 (0.99027), the lowest MBE (0.00044) and RMSE (0.03039) indicated that the Page model was the best mathematical model to describe the drying behavior of sauna dried seaweed. The percentage of the saved time using this technique was calculated at 57.9% on the average solar radiation of about 500 W/m2 and air flow rate of 0.056 kg/s.
基金This paper is funded by National 11th ＂ Five-Year-Plan＂ Major Supporting Projects for Scientific and Technology. Its item name is ＂Green Manufacturing Processes and Equipment＂ with subject number of 2006BAF02A26.
文摘Concept of black box, condition of modeling and control methods were introduced. Taking high purity silica brick as an example, the silica brick featured with high purity, low porosity, low true density and high strength was developed through problem analysis, test design, modeling and optimization. Using information technology to upgrade refractories industry was discussed.
文摘Automated operation and artificial intelligence technology have become essential for ensuring the safety, efficiency, and punctuality of railways, with applications such as ATO (Automatic Train Operation). In this study, the authors propose a method to efficiently simulate the kinematic characteristics of railroad vehicles depending on their speed zone. They utilized the function overloading function supported by a programming language and applied the fourth-order Lunge-Kutta method for dynamic simulation. By constructing an object model, the authors calculated vehicle characteristics and TPS and compared them with actual values, verifying that the developed model represents the real-life vehicle characteristics accurately. The study highlights potential improvements in automated driving and energy consumption optimization in the railway industry.
文摘This Special Issue of the Journal of Rock Mechanics and GeotechnicalEngineering （JRMGE） contains 13 papers prepared by internationalexperts on various general topics in geomechanics, rockmechanics and geotechnical engineering. It represents a usefulmix of theoretical developments, testing and practical applications.We present in the following brief details in the papers, alphabeticallyin accordance with the last name of the first author.Barla presents a review of tunneling techniques with emphasison the full-face method combining full-face excavation and facereinforcement by means of fiber-glass elements with a yieldcontrolsupport. This method has been used successfully in difficultgeologic conditions, and for a wide spectrum of ground situations.The validation of the method with respect to the Saint Martin LaPorte access adit along the LyoneTurin Base tunnel experiencingseverely squeezing conditions during excavation is also includedin the paper. The numerical modeling with consideration of therock mass time-dependent behavior showed a satisfactory agreementwith monitoring results.
文摘Virtual assembly is a Virtual Reality (VR) based engineering application which allows engineers to evaluate, analyze, and plan the assembly of mechanical systems. To model the virtual assembly process, new methodology must be applied. Based on the idea that the virtual assembly system is an event driven system, the interactive behavior and information model is proposed to describe the dynamic process of virtual assembly. Definition of the object-oriented model of virtual assembly is put forward.
文摘In the field of computer graphics, procedural modeling has proven useful for the generation of models of complex realistic objects and environment. In this paper, we present something about the procedural techniques and its application on city modeling.
基金Supported by the National Natural Science Foundation of China,No.81700545the Natural Science Basic Research Plan of Shaanxi Province of China,No.2017JQ8021the Fundamental Research Funds for the Central Universities,No.xjj2018jchz14
文摘BACKGROUND Clinically,tracheoesophageal fistula(TEF)is lack of effective surgical strategies.One reason is due to the lack of appropriate animal models of acquired TEF,which is usually complex and difficult.Recently,the magnetic compression technique has been applied for digestive tract anastomosis or vascular anastomosis in animals.In this study,an animal model of TEF in dogs was developed by using the magnetic compression technique,hoping to provide a new method for mimicking TEF.AIM To establish a TEF model in dogs by using the magnetic compression technique.METHODS Six male beagles were used as models with two Nd-Fe-B permanent magnets for TEF.The parent magnet and the daughter magnet were placed in the cervical esophagus and trachea,respectively.The anterior wall of the esophagus and the posterior wall of the trachea were compressed when the two magnets coupled.After 4-6 d,the necrotic tissue between the two magnets fell off and the parent and daughter magnets disengaged from the target location,leaving a fistula.Gastroscopy/bronchoscopy,upper gastrointestinal contrast study,and histological analysis were performed.RESULTS The establishment of the TEF model in all six beagles was successful.The average time of magnet placement was 4.33±1.11 min(range,3-7 min).Mean time for the magnets to disengage from the target location was 4.67±0.75 d(range,4-6 d).TEFs were observed by gastroscopy/bronchoscopy and esophageal angiography.The gross anatomical structure of the esophagus and the trachea was in good condition.There was no esophageal mucosa or pseudostratified ciliated columnar epithelium at the site of the fistula according to histological analysis.CONCLUSION It is simple,feasible,and minimally invasive to use the magnetic compression technique for the establishment of the TEF model in dogs.
基金supported by the National Key Research and Development Program of China(2017YFD0600401)the Fundamental Research Funds for the Central Universities(2572019CP08)
文摘Korean larch(Larix olgensis)is one of the main tree species for aff orestation and timber production in northeast China.However,its timber quality and growth ability are largely infl uenced by crown size,structure and shape.The majority of crown models are static models based on tree size and stand characteristics from temporary sample plots,but crown dynamic models has seldom been constructed.Therefore,this study aimed to develop height to crown base(HCB)and crown length(CL)dynamic models using the branch mortality technique for a Korean larch plantation.The nonlinear mixed-eff ects model with random eff ects,variance functions and correlation structures,was used to build HCB and CL dynamic models.The data were obtained from 95 sample trees of 19 plots in Meng JiaGang forest farm in Northeast China.The results showed that HCB progressively increases as tree age,tree height growth(HT growth)and diameter at breast height growth(DBH growth).The CL was increased with tree age in 20 years ago,and subsequently stabilized.HT growth,DBH growth stand basal area(BAS)and crown competition factor(CCF)signifi cantly infl uenced HCB and CL.The HCB was positively correlated with BAS,HT growth and DBH growth,but negatively correlated with CCF.The CL was positively correlated with BAS and CCF,but negatively correlated with DBH growth.Model fi tting and validation confi rmed that the mixed-eff ects model considering the stand and tree level random eff ects was accurate and reliable for predicting the HCB and CL dynamics.However,the models involving adding variance functions and time series correlation structure could not completely remove heterogeneity and autocorrelation,and the fi tting precision of the models was reduced.Therefore,from the point of view of application,we should take care to avoid setting up over-complex models.The HCB and CL dynamic models in our study may also be incorporated into stand growth and yield model systems in China.
基金This work was financially supported by the National Natural Science Foundation of China (Grant No10602055)Nature Science Foundation of China Jiliang University (Grant No XZ0501)
文摘In this paper, an inner turret moored FPSO which works in the water of 320 m depth, is selected to study the socalled ＂passively-truncated ＋ numerical-simulation＂ type of hybrid model testing technique while the tnmcated water depth is 160 m and the model scale ）, = 80. During the investigation, the optimization design of the equivalent-depth truncated system is performed by using the similarity of the static characteristics between the truncated system and the full depth one as the objective function. According to the truncated system, the corresponding physical test model is made. By adopting the coupling time domain simulation method, the tnmcated system model test is numerically reconstructed to carefully verify the computer simulation software and to adjust the corresponding hydrodynamic parameters. Based on the above work, the numerical extrapolation to the full depth system is performed by using the verified computer software and the adjusted hydrodyrmmic parameters. The full depth system model test is then performed in the basin and the results are compared with those from the numerical extrapolation. At last, the implementation procedure and the key technique of the hybrid model testing of the deep-sea platforms are summarized and printed. Through the above investigations, some beneficial conclusions are presented.
基金The third author,thanks to Prince Sultan University for supporting this paper through the research group Nonlinear Analysis Methods in Applied Mathematics(NAMAM),group number RGDES-2017-01-17.
文摘The essential features of the nonlinear stochastic models are positivity,dynamical consistency and boundedness.These features have a significant role in different fields of computational biology and many more.The aim of our paper,to achieve the comparison analysis of the stochastic susceptible,infected recovered epidemic model.The stochastic modelling is a realistic way to study the dynamics of compartmental modelling as compared to deterministic modelling.The effect of reproduction number has also observed in the stochastic susceptible,infected recovered epidemic model.For comparison analysis,we developed some explicit stochastic techniques,but they are the time-dependent techniques.The implicitly driven explicit technique has developed for the stochastic susceptible,infected recovered epidemic model.In the support,some theorems and graphical illustration has presented.Also,the time efficiency of this method makes it easy to find the solution of the stochastic system.The comparison with other techniques shows the efficacy and reliability of the designed technique.
文摘Fluctuating voltage levels in power grids necessitate automatic voltage regulators(AVRs)to ensure stability.This study examined the modeling and control of AVR in hydroelectric power plants using model predictive control(MPC),which utilizes an extensive mathe-matical model of the voltage regulation system to optimize the control actions over a defined prediction horizon.This predictive feature enables MPC to minimize voltage deviations while accounting for operational constraints,thereby improving stability and performance under dynamic conditions.Thefindings were compared with those derived from an optimal proportional integral derivative(PID)con-troller designed using the artificial bee colony(ABC)algorithm.Although the ABC-PID method adjusts the PID parameters based on historical data,it may be difficult to adapt to real-time changes in system dynamics under constraints.Comprehensive simulations assessed both frameworks,emphasizing performance metrics such as disturbance rejection,response to load changes,and resilience to uncertainties.The results show that both MPC and ABC-PID methods effectively achieved accurate voltage regulation;however,MPC excelled in controlling overshoot and settling time—recording 0.0%and 0.25 s,respectively.This demonstrates greater robustness compared to conventional control methods that optimize PID parameters based on performance criteria derived from actual system behavior,which exhibited settling times and overshoots exceeding 0.41 s and 5.0%,respectively.The controllers were implemented using MATLAB/Simulink software,indicating a significant advancement for power plant engineers pursuing state-of-the-art automatic voltage regulations.
文摘A numerical model has been developed to simulate the transport and fate of oil spilled at sea. The model combines the transport and fate processes of spilled oil with the random walk technique. Oil movement under the influence of tidal currents, wind driven currents, and turbulent eddies is simulated by the PLUME RW dispersion model developed by HR Wallingford. The weathering processes in the model represent physical and chemical changes of soil slicks with time, and comprise mechanical spreading, dispersion, evaporation and emulsification. Shoreline stranding is determined approximately using a capacity method for different shoreline types. This paper presents details of the model, and describe the results of various sensitivity tests. The model is suitable for oil spill contingency planning.
基金financially supported by the National Natural Science Foundation of China (Grant 51278420)the Natural Science Foundation of Shaanxi Province (Grant 2017JM5021)
文摘In this paper, to investigate the influence of soil inhomogeneity on the bending of circular thinplates on elastic foundations, the static problem of circular thin plates on Gibson elasticfoundation is solved using an iterative method based on the modified Vlasov model. On the basisof the principle of minimum potential energy, the governing differential equations and boundaryconditions for circular thin plates on modified Vlasov foundation considering the characteristics ofGibson soil are derived. The equations for the attenuation parameter in bending problem are alsoobtained, and the issue of unknown parameters being difficult to determine is solved using theiterative method. Numerical examples are analyzed and the results are in good agreement withthose form other literatures. It proves that the method is practical and accurate. Theinhomogeneity of modified Vlasov foundations has some influence on the deformation andinternal force behavior of circular thin plates. The effects of various parameters on the bending ofcircular plates and characteristic parameters of the foundation are discussed. The modified modelfurther enriches and develops the elastic foundations. Relevant conclusions that are meaningful toengineering practice are drawn.
基金supported by National Basic Research Program of China(973 Program,Grant No.2011CB706502)
文摘Modelica-based object-orient method is proved to be rapid, accurate and easy to modify, which is suitable for prototype modeling and simulation of rotor system, whose parameters need to be modified frequently. Classical non-object-orient method appears to be inefficient because the code is difficult to modify and reuse. An adequate library for object-orient modeling of rotor system with multi-faults is established, a comparison with non-object-orient method on Jeffcott rotor system and a case study on turbo expander with multi-faults are implemented. The relative tolerance between object-orient method and non-object-orient is less than 0.03%, which proves that these two methods are as accurate as each other. Object-orient modeling and simulation is implemented on turbo expander with crack, rub-impact, pedestal looseness and multi-faults simultaneously. It can be conclude from the case study that when acting on compress side of turbo expander separately, expand wheel is not influenced greatly by crack fault, the existence of rub-impact fault forces expand wheel into quasi-periodic motion and the orbit of expand wheel is deformed and enhanced almost 1.5 times due to pedestal looseness. When acting simultaneously, multi-faults cannot be totally decomposed but can be diagnosed from the feature of vibration. Object-orient method can enhance the efficiency of modeling and simulation of rotor system with multi-faults, which provides an efficient method on prototype modeling and simulation.
文摘Pneumonia is a highly transmissible disease in children.According to the World Health Organization(WHO),the most affected regions include south Asia and sub-Saharan Africa.Worldwide,15%of pediatric deaths can be attributed to pneumonia.Computing techniques have a significant role in science,engineering,and many other fields.In this study,we focused on the efficiency of numerical techniques via computer programs.We studied the dynamics of the pneumonia-like infections of epidemic models using numerical techniques.We discuss two types of analysis:dynamical and numerical.The dynamical analysis included positivity,boundedness,local stability,reproduction number,and equilibria of the model.We also discusswell-known computing techniques including Euler,Runge Kutta,and non-standard finite difference(NSFD)for the model.The non-standard finite difference(NSFD)technique shows convergence to the true equilibrium points of the model for any time step size.However,Euler and Runge Kutta do not work well over large time intervals.Computing techniques are the suitable tool for crosschecking the theoretical analysis of the model.
