Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
The spatiotemporal characterization of plume sedimentation and microorganisms is critical for developing plume ecological monitoring model.To address the limitations of traditional methods in obtaining high-quality se...The spatiotemporal characterization of plume sedimentation and microorganisms is critical for developing plume ecological monitoring model.To address the limitations of traditional methods in obtaining high-quality sediment,a novel sampling system with 6000 m operational capability and three-month endurance was developed.It is equipped with three sediment samplers,a set of formaldehyde preservation solution injection devices.The system is controlled by a low-power,timing-triggered controllers.To investigate low-disturbance rheological mechanisms,gap controlled rheological tests were conducted to optimize the structural design of the sampling and sealing assembly.Stress-controlled shear rheological tests were employed to investigate the mechanisms governing yield stress in sediments under varying temperature conditions and boundary roughness.Additionally,the coupled Eulerian-Lagrangian(CEL)method and sediment rheological constitutive models were employed to simulate tube-soil interaction dynamics and sediment disturbance.The radial heterogeneity of sediment disturbance and friction variation of the sampling tube were revealed.The tube was completely“plugged”at a penetration depth of 261 mm,providing critical data support to the penetration depth parameters.The deep-sea pressure test and South China Sea field trials demonstrated the system’s capability to collect and preserve quantitative time-series sediment samples with high fidelity.展开更多
The paper considers the methodology for a comprehensive analysis of the stability of an open pit-dump system,using limit equilibrium(LEM)and finite element(FEM)methods in the Russian CAE(computer-aided engineering)sof...The paper considers the methodology for a comprehensive analysis of the stability of an open pit-dump system,using limit equilibrium(LEM)and finite element(FEM)methods in the Russian CAE(computer-aided engineering)software Fidesys.It briefly highlights the issues of comparing limit equilibrium methods using the VNIMI(Research Institute of Geomechanics and Mine Surveying-Intersectoral Scientific Center"VNIMI")methodology and a specialized software product with numerical methods.The main focus of this study is to compare the results of the stability analysis in the volumetric model of the open pit-dump system using limit equilibrium and finite element methods in the CAE software Fidesys.It was found that,when modeling the combined operation of an open pit-dump system in complex terrain,both methods should be used,as each has its own advantages.The finite element method,for instance,has certain features that are not present in the calculations using the limit equilibrium approach.As a key scientific contribution,this paper introduces an automation program for calculating the stability of open-pit walls using the limit equilibrium method in CAE Fidesys,which was not previously integrated in the original software.The calculations performed with the use of this newly developed module were compared to those obtained from other widely used software solutions available on the market.The findings demonstrate a remarkable level of convergence in the calculation results for all relevant parameters,including the safety factor,localization,instability type,and deformation.The proposed approach i mproves the accuracy of calculati ons and ensures consistency between the higher stress design zones and the actual deformation and fracture patterns.It also enhances the ability to predict the behavior of rock mass when calculating stability parameters for facilities,both during operation and desi gn.展开更多
Fractures play a crucial role in various fields such as hydrocarbon exploration,groundwater resources management,and earthquake research.The determination of fracture location and the estimation of parameters such as ...Fractures play a crucial role in various fields such as hydrocarbon exploration,groundwater resources management,and earthquake research.The determination of fracture location and the estimation of parameters such as fracture length and dip angle are the focus of geophysical work.In borehole observation system,the short distance between fractures and detectors leads to weak attenuation of elastic wave energy,and high-frequency source makes it easier to identify small-scale fractures.Compared to traditional monopole logging methods,dipole logging method has advantage of exciting pure shear waves sensitive to fractures,so its application is becoming increasingly widespread.However,since the reflected shear waves and scattered shear waves of fractures correspond to different fracture properties,how to distinguish and analyze these two kinds of waves is crucial for accurately characterizing the fracture parameters.To address this issue,numerical simulation of wave responses by a single fracture near a borehole in rock formation is performed,and the generation mechanism and characteristics of shear waves scattered by fractures are investigated.It is found that when the dip angle of the fracture surpasses a critical threshold,the S-wave will propagate to both endpoints of the fracture and generate scattered S-waves,resulting in two distinct scattered wave packets on the received waveform.When the polarization direction of the acoustic source is parallel to the strike of the fracture,the scattered SH-waves always have larger amplitude than the scattered SV-waves regardless of changing the fracture dip angle.Unlike SV-waves,the SH-waves scattered by the fracture do not have any mode conversion.Additionally,propagation of S-waves to a short length fracture can induce dipole mode vibration of the fracture within a wide frequency range.The phenomena of shear waves reflected and scattered by the fracture are further illustrated and verified by two field examples,thus showing the potential of scattered waves for fracture evaluation and characterization with borehole observation system.展开更多
Heating,Ventilation,andAir Conditioning(HVAC)systems are critical formaintaining thermal comfort in office environments which also crucial for occupant well-being and productivity.This study investigates the impact of...Heating,Ventilation,andAir Conditioning(HVAC)systems are critical formaintaining thermal comfort in office environments which also crucial for occupant well-being and productivity.This study investigates the impact of integrating ceiling fans with higher air conditioning setpoints on thermal comfort and energy efficiency in office environments.Field measurements and questionnaire surveys were conducted to evaluate thermal comfort and energysaving potential under varying conditions.Results show that increasing the AC setpoint from 25○C to 27○C,combined with ceiling fan operation,reduced power consumption by 10%,achieving significant energy savings.Survey data confirmed that 85%of participants reported consistent thermal sensations across all conditions,with ceiling fans effectively compensating for higher setpoints through enhanced air circulation.CFDsimulations revealed that mediumspeed ceiling fan operation produced the most uniformairflowdistribution,with an average air velocity of 0.45 m/s,and minimized temperature variations,ensuring balanced thermal conditions.Temperature analysis showed a reduction in hotspots and cold zones,maintaining an average temperature deviation of less than±0.5○C.Predicted Mean Vote(PMV)evaluations at a 27○C setpoint indicated improved thermal comfort,with average PMV values around−0.3,corresponding to a“neutral”thermal sensation.These findings demonstrate the effectiveness of integrating ceiling fans with HVAC systems in achieving energy efficiency and occupant comfort,offering a sustainable approach to reducing AC energy consumption in office environments.展开更多
This study employs the Smoothed Particle Hydrodynamics(SPH)method to develop a computational fluid dynamics(CFD)model for analyzing the interaction between rogue waves and mooring systems.Four floating body configurat...This study employs the Smoothed Particle Hydrodynamics(SPH)method to develop a computational fluid dynamics(CFD)model for analyzing the interaction between rogue waves and mooring systems.Four floating body configurations are investigated:(1)dual rectangular prisms,(2)rectangular prism–sphere composites,(3)sphere–rectangular prism composites,and(4)dual spheres.These configurations are systematically evaluated under varying mooring conditions to assess their hydrodynamic performance and wave attenuation capabilities.The model accurately captures the complex fluid–structure interaction dynamics between moored floating breakwaters and incident wave fields.Among the configurations,the dual rectangular prism system demonstrates superior performance in both wave dissipation and mooring force reduction.Under conditions involving dual wave makers,the influence of floating body shape and number on wave height is found to be minimal.However,dual-body arrangements consistently outperform single-body setups in terms of both energy dissipation and structural stability.From a cost-efficiency perspective,the configuration comprising two rectangular prisms connected via a single mooring system offers significant advantages in material usage and deployment feasibility.展开更多
Platform-style construction is a widely recognized and well-established approach among engineers and developers for multi-story mass timber buildings.This construction method offers many advantages,such as rapid assem...Platform-style construction is a widely recognized and well-established approach among engineers and developers for multi-story mass timber buildings.This construction method offers many advantages,such as rapid assembly,an excellent strength-to-weight ratio,and appealing aesthetic features.In a platform-type construction,each story is constructed by placing the floor panels on top of the load-bearing wall,creating a platform for the level above.Although this method offers numerous advantages,recent research findings have revealed that cross-laminated(CLT)platform buildings with conventional connections,such as wall-to-floor hold-down brackets and shear connectors with nails and screws,are prone to experience a high degree of damage under design-level earthquakes.Consequently,conventional connections in platform-type construction are vulnerable to more damage under aftershocks and do not meet the damage avoidance requirements of seismic design.This paper introduces an innovative floor-to-wall connection for a platform-type low-rise mass timber building that mitigates the limitations of conventional connections.The effectiveness of the proposed connection has been investigated,and the seismic performance of the system,which incorporates the proposed connection,has been outlined in this paper.A numerical model with an innovative inter-story isolation system is developed in ETABS,and the seismic performance of the isolated structure was evaluated using Response Spectrum Analysis(RSA)and Nonlinear Time History Analysis(NLTHA).This study revealed that inter-story isolation systems significantly reduced the seismic demands on the mass timber components,demonstrating the system’s ability to dissipate seismic energy.Additionally,the system displayed effective energy dissipation while exhibiting self-centering behaviour.展开更多
With the major developments that occurred during the past 40 years in the geotechnical engineering field,the usage of reinforcements in soils has been very common to improve the ultimate bearing capacity and reduce th...With the major developments that occurred during the past 40 years in the geotechnical engineering field,the usage of reinforcements in soils has been very common to improve the ultimate bearing capacity and reduce the footing settlements.These reinforcements consist of geogrids,geotextiles,geocells,etc.,all of which are in the geosynthetic family.Among these geosynthetic families,geocell performs better in soil-reinforced beds.In this study,we proposed the nine types of bioinspired geocells to improve the soil beds.For this purpose,a total of twenty numerical models were calculated via FLAC3D after validating the la-boratory model tests in the literature.The numerical results demonstrated that,except for the circular type,the performance of other geocell forms regarding increased bearing capacity was nearly identical.Regarding diffusion angles,only the circular and honeycomb geocells exhibited larger diffusion angles.The opening pocket diameter more significantly influenced the stress and strain of geocells.Geocells with nearly circular shapes,such as circular,honeycomb,hexagonal,and square,typically demonstrated higher confining stresses within the geocell walls.Conversely,for shapes that deviate from the circular form,such as dia-mond,re-entrant,and double V-shaped designs,the irregularity of the pocket shape could cause an uneven distribution of confining stresses,potentially leading to higher normal deformations at some specific areas and stress concentration at the wall joints.展开更多
The operation furnace profile for the high heat load zone was one of the important factors affecting the stable and high-quality production of the blast furnace,but it was difficult to monitor directly.To address this...The operation furnace profile for the high heat load zone was one of the important factors affecting the stable and high-quality production of the blast furnace,but it was difficult to monitor directly.To address this issue,an online calculation model for the operation furnace profile was proposed based on a dual-driven approach combining data and mechanisms,by integrating mechanism experiment,numerical simulation,and machine learning.The experimentally determined slag layer hanging temperature was 1130℃,and the thermal conductivity ranged from 1.32 to 1.96 m^(2)℃^(-1).Based on the 3D slag-hanging numerical simulation model,a database was constructed,containing 2294 sets of mechanism cases for the slag layer.The fusion of data modeling,heat transfer theory,and expert experience enabled the online calculation of key input variables for the operation furnace profile,particularly the quantification of the“black-box”variable of gas temperature.Simulated data were used as inputs,and light gradient boosting machine was applied to construct the online calculation model for the operation furnace profile.This model facilitated the online calculation of the slag layer thickness and other key indices.The coefficient of determination of the model exceeded 0.98,indicating high accuracy.A slag layer state judgment model was constructed,categorizing states as shedding,too thin,normal,and too thick.Real-time data were applied,and the average slag thickness in the high heat load area of the test data ranged from 40 to 80 mm,which was consistent with field experience.The absolute value of the Pearson correlation coefficient between slag layer thickness,thermocouple temperature,and heat load data was above 0.85,indicating that the calculated results closely aligned with the actual trends.A 3D visual online monitoring system for the operation furnace profile was created,and it has been successfully implemented at the blast furnace site.展开更多
BACKGROUND Liver cirrhosis patients can develop various complications including bacteremia as the intestinal flora is heterologous.In those with low immunity,trauma,or following surgery,etc.,the body is susceptible to...BACKGROUND Liver cirrhosis patients can develop various complications including bacteremia as the intestinal flora is heterologous.In those with low immunity,trauma,or following surgery,etc.,the body is susceptible to concurrent systemic or local infections.Under these circumstances,even minimally invasive treatment methods such as interventional therapy like transjugular intrahepatic portosystemic shunt(TIPS)for liver cirrhosis patients can also result in complications such as infections.CASE SUMMARY A male patient with decompensated cirrhosis experienced multiple episodes of gastrointestinal bleeding and hypersplenism.He was admitted to hospital due to voluntary remedial TIPS.The patient developed a numerous intrahepatic liver abscess postoperatively.Following initial conservative treatment with intravenous antibiotics and parenteral nutrition,three months after TIPS,the liver abscess had disappeared on imaging examination.At the 6-month postoperative follow-up,outpatient re-examination showed that the patient had recovered and the liver abscess had resolved.CONCLUSION Attention should be paid to decreased blood cell counts,especially low leukocyte levels in patients with liver cirrhosis as the presence of intestinal microbiota dysregulation and portal pyemia can result in liver abscess and sepsis during invasive diagnostic and therapeutic procedures like TIPS.The addition of probiotics might reduce the risk in such patients.展开更多
This study employs two-dimensional axisymmetric relativistic magnetohydrodynamic simulations to investigate the evolution of supernova remnant(SNR) and pulsar wind nebula(PWN) composite systems in two distinct interst...This study employs two-dimensional axisymmetric relativistic magnetohydrodynamic simulations to investigate the evolution of supernova remnant(SNR) and pulsar wind nebula(PWN) composite systems in two distinct interstellar medium(ISM) configurations: a uniform density distribution and a medium with a sharp density discontinuity. Compared to the uniform density distribution, the ISM with this density discontinuity better reflects the actual conditions and explains the overall morphological characteristics of specific types of SNR-PWN composite systems. These systems exhibit asymmetries, such as an SNR shell with differing radii or an inner PWN located nearer to the shell on one side. The simulation results suggest that the density discontinuity in the ISM is a contributing factor to both the shell asymmetry and the PWN displacement. Specifically, this density variation directly causes the inconsistency in the forward shock speeds of the SNR between high and low density regions, resulting in discrepancies in the shell layer radii. Furthermore, the asymmetric morphology of the PWN and its positional offset emerge through interactions with the reverse shock. The PWN tends to shift toward the SNR shell on one side. The greater the density jump in the background field, the more pronounced the shell radius differences and PWN offset become.展开更多
Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper ...Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper proposes an Adaptive Terminal Sliding Combined Super TwistingControl(ATS-STC)method to address the issues of low precision,slow convergence,and poor dis-turbance rejection capability resulting from external disturbances,such as carrier air-wake and deckmotion.By introducing a nonlinear term into the sliding surface and employing an integralapproach,the proposed ATS-STC method can ensure finite-time convergence and mitigate the chat-tering problem.An adaptive law is also utilized to estimate the external disturbances,therebyenhancing the anti-disturbance performance.Then,the stability and convergence time analysis ofthe designed controller are conducted.Based on the proposed method,an Automatic Carrier Land-ing System(ACLS)is developed to perform the carrier landing control task.Furthermore,a multi-dimensional validation is carried out.For the numerical simulation test,the Terminal Sliding ModeControl(TSMC)method and Proportion Integration Differentiation(PID)method are introducedas comparison,the quantitative assessment results show that the tracking error of TSMC and PIDcan reach 1.5 times and 2 times that of the proposed method.Finally,the Hardware-in-the-Loop(HIL)test and real flight test are conducted.All the experimental results demonstrate that the pro-posed control method is more effective and precise.展开更多
A 5-axis controller with curve interpolation function is developed to satisfy high-speed and high-precision computer numerical control (CNC) machining of machine parts with complex shapes in the authors-devised open C...A 5-axis controller with curve interpolation function is developed to satisfy high-speed and high-precision computer numerical control (CNC) machining of machine parts with complex shapes in the authors-devised open CNC system. The instruction for- mat of this interpolation method and the generation procedure of the numerical control (NC) files are introduced. The interpola- tion curves of both position vectors and orientation vectors constructed by the controller are C2 continuous and independent of machin...展开更多
The flow field and aerodynamic performances for the scarfed lobed forced mixer are studied based on a computational fluid dynamics（CFD） technique. A series of computations are conducted to obtain the effects of the ...The flow field and aerodynamic performances for the scarfed lobed forced mixer are studied based on a computational fluid dynamics（CFD） technique. A series of computations are conducted to obtain the effects of the bypass ratio and the scarf angle on the mixing performance for the scarfed lobed mixer. Results show that the scarfed lobed mixer is reduced in the system weight. Meanwhile, aerodynamic performances are slightly improved compared with the normal lobed mixer. Two reasons for causing the mixing enhancement between the core and the bypass flow are as follows： （1） The stream-wise vortices shed from the training edge of the half/full scarfed lobed mixer earlier is enhanced by about 25%. （2） The mixing augmentation is also associated with the increase of the interface length caused by scarfing. The thermal mixing efficiency is enhanced with the increase of the bypass ratio and the scarfing angle. The scarfed lobed mixer design has no negative effects on the pressure loss. The total pressure recovery coefficient reaches above 0. 935 in various bypass ratios and scarfed angles. As the bypass ratio increases, the total pressure recovery coefficient also increases for the scarfed lobed mixer.展开更多
In order to investigate the alternate operation characteristics of a solar-ground source heat pump system（SGSHPS）,various alternate operation modes are put forward and defined.A two-dimensional mathematical model wi...In order to investigate the alternate operation characteristics of a solar-ground source heat pump system（SGSHPS）,various alternate operation modes are put forward and defined.A two-dimensional mathematical model with freezing/melting phase changes is developed for the heat transfer analysis of the soil.Based on the numerical solution of the model,the variation trends of underground soil temperature of the SGSHPS operated in various alternate operation modes are discussed.The results indicate that,for the day-night and short-time interval alternate operation modes without solar energy,the operation time fraction of a solar heat source should be confined to from 50% to 58% when operated in an alternate period of 24 h.Meanwhile,the disadvantages of a natural resumption of soil temperature can be overcome effectively by solar energy filling,and an optimal operation effect can be achieved by integrating the mode of solar energy filling with other alternate modes.In addition,the accuracy of the presented model is verified by the experimental data of borehole wall temperatures.The conclusions can provide a reference for the optimization operation of the SGSHPS.展开更多
Based on the multi-body kinematics principle, the topological structure and restriction relation among parts of machine tool and 3D multi-body model are constructed, the kinematics simulation system of machine tool is...Based on the multi-body kinematics principle, the topological structure and restriction relation among parts of machine tool and 3D multi-body model are constructed, the kinematics simulation system of machine tool is developed. The designer can observe the movement and machining course of the whole machine tool and understand accurately the kinematics parameters of components such as position, velocity and acceleration. Also the designer can estimate the pose of components in the virtual circumstance and forecast accurately and correct problems which may appear during the design before the prototype is manufactured to assure the feasibility of design scheme, shorten period of product design and reduce product cost. The simulation system is used during the design of CK1416 high speed and precision numerical control lathe. The curves of ball screw angular velocity and carriage displacement agree well with the results of theoretical calculation and the constructed model is correct.展开更多
The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the ge...The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the genetic algorithm (GA) is investigated. Its calculation speed is faster than that of traditional optimization methods, and it is suitable for the machining parameter optimization in the automatic manufacturing system. Based on the theoretical studies, a system of machining parameter management and optimization is developed. The system can improve productivity of the high-speed machining centers.展开更多
The computer numerical control（CNC） system is suited to control varied types of flexible fixtures in aircraft component manufacturing and assembly. The mechanisms and control requirements of flexible fixtures are pr...The computer numerical control（CNC） system is suited to control varied types of flexible fixtures in aircraft component manufacturing and assembly. The mechanisms and control requirements of flexible fixtures are presented and analyzed. The hardware and software architecture and implementation of CNC system are pro- posed. The flexible fixture mechanism is described using configuration parameters. According to the parameters, the CNC system automatically generates the control feature and the human machine interface （HMI） operation function. The CNC system is implemented in a flexible fixture for skin-strlnger assembly, and results show the effectiveness of the system.展开更多
A mathematical model of principal elements of the aircraft hydraulic system is presented based on the heat transfer theory. The dynamic heat transfer process of the hydraulic oil and the pump shells within an aircraft...A mathematical model of principal elements of the aircraft hydraulic system is presented based on the heat transfer theory. The dynamic heat transfer process of the hydraulic oil and the pump shells within an aircraft hydraulic system are analyzed by the difference method. A kind of means for the prediction to variational trends of the aircraft hydraulic system temperature is provided during operation. The numerical prediction and simulation under the operational conditions are presented for ground trial running and the decelerated operation in flight. Computational results show that there is a good coincidence between the experimental data and the numerical predictions.展开更多
The filling and solidification of a malleable iron pipe casting manufactured by DISA casting mold line with different design parameters were calculated by using software MAGMASOFT. Then the shrinkage porosity was pred...The filling and solidification of a malleable iron pipe casting manufactured by DISA casting mold line with different design parameters were calculated by using software MAGMASOFT. Then the shrinkage porosity was predicted by thermal criterion. Based on the simulation results, the influences of the runner ratio and feeder position on the porosity were discussed. The results show that synchronization of injection can be significantly influenced by the size of downsprue section, and an de-sign structure of DISA gating system was used to solve the problem of flow imbalance in the filling procegs. At the same time, the riser was designed on the hotspot for feeding shrinkage. At last, the optimizated gating system and feeding system were ac-complished to eliminate shrinkage porosity.展开更多
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金supported by the National Key R&D Program of China(No.2022YFC2803900)the National Natural Science Foundation of China(No.42276191)Zhejiang University Students Science and Technology Innovation Activity Plan(New Talent Plan)(No.2024R401185).
文摘The spatiotemporal characterization of plume sedimentation and microorganisms is critical for developing plume ecological monitoring model.To address the limitations of traditional methods in obtaining high-quality sediment,a novel sampling system with 6000 m operational capability and three-month endurance was developed.It is equipped with three sediment samplers,a set of formaldehyde preservation solution injection devices.The system is controlled by a low-power,timing-triggered controllers.To investigate low-disturbance rheological mechanisms,gap controlled rheological tests were conducted to optimize the structural design of the sampling and sealing assembly.Stress-controlled shear rheological tests were employed to investigate the mechanisms governing yield stress in sediments under varying temperature conditions and boundary roughness.Additionally,the coupled Eulerian-Lagrangian(CEL)method and sediment rheological constitutive models were employed to simulate tube-soil interaction dynamics and sediment disturbance.The radial heterogeneity of sediment disturbance and friction variation of the sampling tube were revealed.The tube was completely“plugged”at a penetration depth of 261 mm,providing critical data support to the penetration depth parameters.The deep-sea pressure test and South China Sea field trials demonstrated the system’s capability to collect and preserve quantitative time-series sediment samples with high fidelity.
文摘The paper considers the methodology for a comprehensive analysis of the stability of an open pit-dump system,using limit equilibrium(LEM)and finite element(FEM)methods in the Russian CAE(computer-aided engineering)software Fidesys.It briefly highlights the issues of comparing limit equilibrium methods using the VNIMI(Research Institute of Geomechanics and Mine Surveying-Intersectoral Scientific Center"VNIMI")methodology and a specialized software product with numerical methods.The main focus of this study is to compare the results of the stability analysis in the volumetric model of the open pit-dump system using limit equilibrium and finite element methods in the CAE software Fidesys.It was found that,when modeling the combined operation of an open pit-dump system in complex terrain,both methods should be used,as each has its own advantages.The finite element method,for instance,has certain features that are not present in the calculations using the limit equilibrium approach.As a key scientific contribution,this paper introduces an automation program for calculating the stability of open-pit walls using the limit equilibrium method in CAE Fidesys,which was not previously integrated in the original software.The calculations performed with the use of this newly developed module were compared to those obtained from other widely used software solutions available on the market.The findings demonstrate a remarkable level of convergence in the calculation results for all relevant parameters,including the safety factor,localization,instability type,and deformation.The proposed approach i mproves the accuracy of calculati ons and ensures consistency between the higher stress design zones and the actual deformation and fracture patterns.It also enhances the ability to predict the behavior of rock mass when calculating stability parameters for facilities,both during operation and desi gn.
基金supported by Scientific Research and Technology Development Project of CNPC(2024ZG38,2024ZG42)the CNPC Innovation Fund(2022DQ02-0307).
文摘Fractures play a crucial role in various fields such as hydrocarbon exploration,groundwater resources management,and earthquake research.The determination of fracture location and the estimation of parameters such as fracture length and dip angle are the focus of geophysical work.In borehole observation system,the short distance between fractures and detectors leads to weak attenuation of elastic wave energy,and high-frequency source makes it easier to identify small-scale fractures.Compared to traditional monopole logging methods,dipole logging method has advantage of exciting pure shear waves sensitive to fractures,so its application is becoming increasingly widespread.However,since the reflected shear waves and scattered shear waves of fractures correspond to different fracture properties,how to distinguish and analyze these two kinds of waves is crucial for accurately characterizing the fracture parameters.To address this issue,numerical simulation of wave responses by a single fracture near a borehole in rock formation is performed,and the generation mechanism and characteristics of shear waves scattered by fractures are investigated.It is found that when the dip angle of the fracture surpasses a critical threshold,the S-wave will propagate to both endpoints of the fracture and generate scattered S-waves,resulting in two distinct scattered wave packets on the received waveform.When the polarization direction of the acoustic source is parallel to the strike of the fracture,the scattered SH-waves always have larger amplitude than the scattered SV-waves regardless of changing the fracture dip angle.Unlike SV-waves,the SH-waves scattered by the fracture do not have any mode conversion.Additionally,propagation of S-waves to a short length fracture can induce dipole mode vibration of the fracture within a wide frequency range.The phenomena of shear waves reflected and scattered by the fracture are further illustrated and verified by two field examples,thus showing the potential of scattered waves for fracture evaluation and characterization with borehole observation system.
基金support by the National Science and Technology Council under Grant No.NSTC 112-2221-E-167-017-MY3.
文摘Heating,Ventilation,andAir Conditioning(HVAC)systems are critical formaintaining thermal comfort in office environments which also crucial for occupant well-being and productivity.This study investigates the impact of integrating ceiling fans with higher air conditioning setpoints on thermal comfort and energy efficiency in office environments.Field measurements and questionnaire surveys were conducted to evaluate thermal comfort and energysaving potential under varying conditions.Results show that increasing the AC setpoint from 25○C to 27○C,combined with ceiling fan operation,reduced power consumption by 10%,achieving significant energy savings.Survey data confirmed that 85%of participants reported consistent thermal sensations across all conditions,with ceiling fans effectively compensating for higher setpoints through enhanced air circulation.CFDsimulations revealed that mediumspeed ceiling fan operation produced the most uniformairflowdistribution,with an average air velocity of 0.45 m/s,and minimized temperature variations,ensuring balanced thermal conditions.Temperature analysis showed a reduction in hotspots and cold zones,maintaining an average temperature deviation of less than±0.5○C.Predicted Mean Vote(PMV)evaluations at a 27○C setpoint indicated improved thermal comfort,with average PMV values around−0.3,corresponding to a“neutral”thermal sensation.These findings demonstrate the effectiveness of integrating ceiling fans with HVAC systems in achieving energy efficiency and occupant comfort,offering a sustainable approach to reducing AC energy consumption in office environments.
基金funding from the National Natural Science Foundation of China(No.12462028).
文摘This study employs the Smoothed Particle Hydrodynamics(SPH)method to develop a computational fluid dynamics(CFD)model for analyzing the interaction between rogue waves and mooring systems.Four floating body configurations are investigated:(1)dual rectangular prisms,(2)rectangular prism–sphere composites,(3)sphere–rectangular prism composites,and(4)dual spheres.These configurations are systematically evaluated under varying mooring conditions to assess their hydrodynamic performance and wave attenuation capabilities.The model accurately captures the complex fluid–structure interaction dynamics between moored floating breakwaters and incident wave fields.Among the configurations,the dual rectangular prism system demonstrates superior performance in both wave dissipation and mooring force reduction.Under conditions involving dual wave makers,the influence of floating body shape and number on wave height is found to be minimal.However,dual-body arrangements consistently outperform single-body setups in terms of both energy dissipation and structural stability.From a cost-efficiency perspective,the configuration comprising two rectangular prisms connected via a single mooring system offers significant advantages in material usage and deployment feasibility.
基金gratitude to WIDE Trust New Zealand for providing the opportunity and funding for this research,as well as QuakeCoRE,a New Zealand Tertiary Education Commission-funded Centre,for partially funding this research.This is QuakeCoRE,publication number 1013.
文摘Platform-style construction is a widely recognized and well-established approach among engineers and developers for multi-story mass timber buildings.This construction method offers many advantages,such as rapid assembly,an excellent strength-to-weight ratio,and appealing aesthetic features.In a platform-type construction,each story is constructed by placing the floor panels on top of the load-bearing wall,creating a platform for the level above.Although this method offers numerous advantages,recent research findings have revealed that cross-laminated(CLT)platform buildings with conventional connections,such as wall-to-floor hold-down brackets and shear connectors with nails and screws,are prone to experience a high degree of damage under design-level earthquakes.Consequently,conventional connections in platform-type construction are vulnerable to more damage under aftershocks and do not meet the damage avoidance requirements of seismic design.This paper introduces an innovative floor-to-wall connection for a platform-type low-rise mass timber building that mitigates the limitations of conventional connections.The effectiveness of the proposed connection has been investigated,and the seismic performance of the system,which incorporates the proposed connection,has been outlined in this paper.A numerical model with an innovative inter-story isolation system is developed in ETABS,and the seismic performance of the isolated structure was evaluated using Response Spectrum Analysis(RSA)and Nonlinear Time History Analysis(NLTHA).This study revealed that inter-story isolation systems significantly reduced the seismic demands on the mass timber components,demonstrating the system’s ability to dissipate seismic energy.Additionally,the system displayed effective energy dissipation while exhibiting self-centering behaviour.
基金financially supported by the Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(No.SKLGME-JBGS2403)the National Natural Science Foundation of China(No.42477205)the Hubei Provincial Innovation Group Project(No.2023AFA019).
文摘With the major developments that occurred during the past 40 years in the geotechnical engineering field,the usage of reinforcements in soils has been very common to improve the ultimate bearing capacity and reduce the footing settlements.These reinforcements consist of geogrids,geotextiles,geocells,etc.,all of which are in the geosynthetic family.Among these geosynthetic families,geocell performs better in soil-reinforced beds.In this study,we proposed the nine types of bioinspired geocells to improve the soil beds.For this purpose,a total of twenty numerical models were calculated via FLAC3D after validating the la-boratory model tests in the literature.The numerical results demonstrated that,except for the circular type,the performance of other geocell forms regarding increased bearing capacity was nearly identical.Regarding diffusion angles,only the circular and honeycomb geocells exhibited larger diffusion angles.The opening pocket diameter more significantly influenced the stress and strain of geocells.Geocells with nearly circular shapes,such as circular,honeycomb,hexagonal,and square,typically demonstrated higher confining stresses within the geocell walls.Conversely,for shapes that deviate from the circular form,such as dia-mond,re-entrant,and double V-shaped designs,the irregularity of the pocket shape could cause an uneven distribution of confining stresses,potentially leading to higher normal deformations at some specific areas and stress concentration at the wall joints.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52404343 and 52274326)the Fundamental Research Funds for the Central Universities(Grant Nos.N2425031 and N25BJD007)+1 种基金the China Postdoctoral Science Foundation(Grant No.2024M760370)the Liaoning Province Science and Technology Plan Joint Program(Key Research and Development Program Project)(Grant No.2023JH2/101800058).
文摘The operation furnace profile for the high heat load zone was one of the important factors affecting the stable and high-quality production of the blast furnace,but it was difficult to monitor directly.To address this issue,an online calculation model for the operation furnace profile was proposed based on a dual-driven approach combining data and mechanisms,by integrating mechanism experiment,numerical simulation,and machine learning.The experimentally determined slag layer hanging temperature was 1130℃,and the thermal conductivity ranged from 1.32 to 1.96 m^(2)℃^(-1).Based on the 3D slag-hanging numerical simulation model,a database was constructed,containing 2294 sets of mechanism cases for the slag layer.The fusion of data modeling,heat transfer theory,and expert experience enabled the online calculation of key input variables for the operation furnace profile,particularly the quantification of the“black-box”variable of gas temperature.Simulated data were used as inputs,and light gradient boosting machine was applied to construct the online calculation model for the operation furnace profile.This model facilitated the online calculation of the slag layer thickness and other key indices.The coefficient of determination of the model exceeded 0.98,indicating high accuracy.A slag layer state judgment model was constructed,categorizing states as shedding,too thin,normal,and too thick.Real-time data were applied,and the average slag thickness in the high heat load area of the test data ranged from 40 to 80 mm,which was consistent with field experience.The absolute value of the Pearson correlation coefficient between slag layer thickness,thermocouple temperature,and heat load data was above 0.85,indicating that the calculated results closely aligned with the actual trends.A 3D visual online monitoring system for the operation furnace profile was created,and it has been successfully implemented at the blast furnace site.
文摘BACKGROUND Liver cirrhosis patients can develop various complications including bacteremia as the intestinal flora is heterologous.In those with low immunity,trauma,or following surgery,etc.,the body is susceptible to concurrent systemic or local infections.Under these circumstances,even minimally invasive treatment methods such as interventional therapy like transjugular intrahepatic portosystemic shunt(TIPS)for liver cirrhosis patients can also result in complications such as infections.CASE SUMMARY A male patient with decompensated cirrhosis experienced multiple episodes of gastrointestinal bleeding and hypersplenism.He was admitted to hospital due to voluntary remedial TIPS.The patient developed a numerous intrahepatic liver abscess postoperatively.Following initial conservative treatment with intravenous antibiotics and parenteral nutrition,three months after TIPS,the liver abscess had disappeared on imaging examination.At the 6-month postoperative follow-up,outpatient re-examination showed that the patient had recovered and the liver abscess had resolved.CONCLUSION Attention should be paid to decreased blood cell counts,especially low leukocyte levels in patients with liver cirrhosis as the presence of intestinal microbiota dysregulation and portal pyemia can result in liver abscess and sepsis during invasive diagnostic and therapeutic procedures like TIPS.The addition of probiotics might reduce the risk in such patients.
基金supported by the National Natural Science Foundation of China(NSFC,grants No.12393852)the Yunnan Fundamental Research Projects(grant No.202501AS070068)the Program of Graduate Research and Innovation Fund Project of Yunnan University(KC-24249493).
文摘This study employs two-dimensional axisymmetric relativistic magnetohydrodynamic simulations to investigate the evolution of supernova remnant(SNR) and pulsar wind nebula(PWN) composite systems in two distinct interstellar medium(ISM) configurations: a uniform density distribution and a medium with a sharp density discontinuity. Compared to the uniform density distribution, the ISM with this density discontinuity better reflects the actual conditions and explains the overall morphological characteristics of specific types of SNR-PWN composite systems. These systems exhibit asymmetries, such as an SNR shell with differing radii or an inner PWN located nearer to the shell on one side. The simulation results suggest that the density discontinuity in the ISM is a contributing factor to both the shell asymmetry and the PWN displacement. Specifically, this density variation directly causes the inconsistency in the forward shock speeds of the SNR between high and low density regions, resulting in discrepancies in the shell layer radii. Furthermore, the asymmetric morphology of the PWN and its positional offset emerge through interactions with the reverse shock. The PWN tends to shift toward the SNR shell on one side. The greater the density jump in the background field, the more pronounced the shell radius differences and PWN offset become.
基金supported by the National Natural Science Foundation of China(No.T2288101)the National Key Research and Development Project,China(No.2020YFC1512500)the Academic Excellence Foundation of Beijing University of Aeronautics and Astronautics(BUAA)。
文摘Considering the challenges posed by external disturbances on carrier-based aircraft land-ing control,higher demands are required for the precision and convergence of the carrier landingcontrol system.First,this paper proposes an Adaptive Terminal Sliding Combined Super TwistingControl(ATS-STC)method to address the issues of low precision,slow convergence,and poor dis-turbance rejection capability resulting from external disturbances,such as carrier air-wake and deckmotion.By introducing a nonlinear term into the sliding surface and employing an integralapproach,the proposed ATS-STC method can ensure finite-time convergence and mitigate the chat-tering problem.An adaptive law is also utilized to estimate the external disturbances,therebyenhancing the anti-disturbance performance.Then,the stability and convergence time analysis ofthe designed controller are conducted.Based on the proposed method,an Automatic Carrier Land-ing System(ACLS)is developed to perform the carrier landing control task.Furthermore,a multi-dimensional validation is carried out.For the numerical simulation test,the Terminal Sliding ModeControl(TSMC)method and Proportion Integration Differentiation(PID)method are introducedas comparison,the quantitative assessment results show that the tracking error of TSMC and PIDcan reach 1.5 times and 2 times that of the proposed method.Finally,the Hardware-in-the-Loop(HIL)test and real flight test are conducted.All the experimental results demonstrate that the pro-posed control method is more effective and precise.
基金Key Development Program of Science and Technology of Heilongjiang Province, China (GB05A501)
文摘A 5-axis controller with curve interpolation function is developed to satisfy high-speed and high-precision computer numerical control (CNC) machining of machine parts with complex shapes in the authors-devised open CNC system. The instruction for- mat of this interpolation method and the generation procedure of the numerical control (NC) files are introduced. The interpola- tion curves of both position vectors and orientation vectors constructed by the controller are C2 continuous and independent of machin...
基金Supported by the Civil Aviation Research Foundation of Nanjing University of Aeronautics and Astronautics~~
文摘The flow field and aerodynamic performances for the scarfed lobed forced mixer are studied based on a computational fluid dynamics（CFD） technique. A series of computations are conducted to obtain the effects of the bypass ratio and the scarf angle on the mixing performance for the scarfed lobed mixer. Results show that the scarfed lobed mixer is reduced in the system weight. Meanwhile, aerodynamic performances are slightly improved compared with the normal lobed mixer. Two reasons for causing the mixing enhancement between the core and the bypass flow are as follows： （1） The stream-wise vortices shed from the training edge of the half/full scarfed lobed mixer earlier is enhanced by about 25%. （2） The mixing augmentation is also associated with the increase of the interface length caused by scarfing. The thermal mixing efficiency is enhanced with the increase of the bypass ratio and the scarfing angle. The scarfed lobed mixer design has no negative effects on the pressure loss. The total pressure recovery coefficient reaches above 0. 935 in various bypass ratios and scarfed angles. As the bypass ratio increases, the total pressure recovery coefficient also increases for the scarfed lobed mixer.
基金The National Key Technology R&D Program of Chinaduring the 11th Five-Year Plan Period(No.2008BAJ12B04)China Postdoctoral Science Foundation(No.20090461050)+1 种基金the Project of Researchand Development of Ministry of Housing and Urban-Rural Development ofChina(No.2008-K1-26)the New Century Talent Project of Yangzhou University for Excellent Young Backbone Teacher(2008)
文摘In order to investigate the alternate operation characteristics of a solar-ground source heat pump system（SGSHPS）,various alternate operation modes are put forward and defined.A two-dimensional mathematical model with freezing/melting phase changes is developed for the heat transfer analysis of the soil.Based on the numerical solution of the model,the variation trends of underground soil temperature of the SGSHPS operated in various alternate operation modes are discussed.The results indicate that,for the day-night and short-time interval alternate operation modes without solar energy,the operation time fraction of a solar heat source should be confined to from 50% to 58% when operated in an alternate period of 24 h.Meanwhile,the disadvantages of a natural resumption of soil temperature can be overcome effectively by solar energy filling,and an optimal operation effect can be achieved by integrating the mode of solar energy filling with other alternate modes.In addition,the accuracy of the presented model is verified by the experimental data of borehole wall temperatures.The conclusions can provide a reference for the optimization operation of the SGSHPS.
文摘Based on the multi-body kinematics principle, the topological structure and restriction relation among parts of machine tool and 3D multi-body model are constructed, the kinematics simulation system of machine tool is developed. The designer can observe the movement and machining course of the whole machine tool and understand accurately the kinematics parameters of components such as position, velocity and acceleration. Also the designer can estimate the pose of components in the virtual circumstance and forecast accurately and correct problems which may appear during the design before the prototype is manufactured to assure the feasibility of design scheme, shorten period of product design and reduce product cost. The simulation system is used during the design of CK1416 high speed and precision numerical control lathe. The curves of ball screw angular velocity and carriage displacement agree well with the results of theoretical calculation and the constructed model is correct.
文摘The theory and its method of machining parameter optimization for high-speed machining are studied. The machining data collected from workshops, labs and references are analyzed. An optimization method based on the genetic algorithm (GA) is investigated. Its calculation speed is faster than that of traditional optimization methods, and it is suitable for the machining parameter optimization in the automatic manufacturing system. Based on the theoretical studies, a system of machining parameter management and optimization is developed. The system can improve productivity of the high-speed machining centers.
文摘The computer numerical control（CNC） system is suited to control varied types of flexible fixtures in aircraft component manufacturing and assembly. The mechanisms and control requirements of flexible fixtures are presented and analyzed. The hardware and software architecture and implementation of CNC system are pro- posed. The flexible fixture mechanism is described using configuration parameters. According to the parameters, the CNC system automatically generates the control feature and the human machine interface （HMI） operation function. The CNC system is implemented in a flexible fixture for skin-strlnger assembly, and results show the effectiveness of the system.
文摘A mathematical model of principal elements of the aircraft hydraulic system is presented based on the heat transfer theory. The dynamic heat transfer process of the hydraulic oil and the pump shells within an aircraft hydraulic system are analyzed by the difference method. A kind of means for the prediction to variational trends of the aircraft hydraulic system temperature is provided during operation. The numerical prediction and simulation under the operational conditions are presented for ground trial running and the decelerated operation in flight. Computational results show that there is a good coincidence between the experimental data and the numerical predictions.
文摘The filling and solidification of a malleable iron pipe casting manufactured by DISA casting mold line with different design parameters were calculated by using software MAGMASOFT. Then the shrinkage porosity was predicted by thermal criterion. Based on the simulation results, the influences of the runner ratio and feeder position on the porosity were discussed. The results show that synchronization of injection can be significantly influenced by the size of downsprue section, and an de-sign structure of DISA gating system was used to solve the problem of flow imbalance in the filling procegs. At the same time, the riser was designed on the hotspot for feeding shrinkage. At last, the optimizated gating system and feeding system were ac-complished to eliminate shrinkage porosity.
