To address the challenges of poor surface quality and high energy consumption in marble cutting,this study introduces an auxiliary abrasive jet cutting technology enhanced by the use of polyacrylamide(PAM)as a dragred...To address the challenges of poor surface quality and high energy consumption in marble cutting,this study introduces an auxiliary abrasive jet cutting technology enhanced by the use of polyacrylamide(PAM)as a dragreducing additive.The effects of feed rate(50-300 mm/min),polymer concentration(0-0.5 g/L),and nozzle spacing(4-12 mm)on kerf width and surface roughness are systematically investigated through an orthogonal experimental design.Results reveal that feed rate emerges as themost significant factor(p<0.01),followed by PAM concentration and nozzle spacing.The optimal set of parameters,comprising a 200 mm/min feed rate,0.3 g/L PAM concentration,and 6mmnozzle spacing,achieves the narrowest kerf width(0.867 mm)and the lowest surface roughness(10.220μm).Analysis of the underlying mechanisms demonstrates that PAMenhances the energy efficiency of the jet by suppressing turbulent pulsations and increasing fluid viscoelasticity,thereby minimizing energy loss during the cutting process.展开更多
Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while exte...Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while extending their lifespan.This paper explores the application of laser-assisted water jet technology in constructing high-quality micro-trap structures on 316L stainless steel,a key material in accelerator manufacturing.The study systematically analyzes the impact of various parameters such as laser repetition frequency,pulse duration,average power,water jet pressure,repeat times,nozzle offset,focal position,offset distance between grooves,and processing speed on the surface morphology of stainless steel.The findings reveal that micro-groove depth increases with higher laser power but decreases with increasing water jet pressure and processing speed.Interestingly,repeat times have minimal effect on depth.On the other hand,micro-groove width increases with higher laser power and repeat times but decreases with processing speed.By optimizing these parameters,the researchers achieved high-quality pound sign-shaped trap structure with consistent dimensions.We tested the secondary electron emission coefficient of the"well"structure.The coefficient is reduced by 0.5 at most compared to before processing,effectively suppressing secondary electron emission.These results offer indispensable insights for the fabrication of micro-trap structures on material surfaces.Laser-assisted water jet technology demonstrates considerable potential in mitigating SEE on metal surfaces.展开更多
The surface dielectric barrier discharge （SDBD） plasma actuator has shown great promise as an aerodynamic flow control device. In this paper, the encapsulated electrode width of a SDBD actuator is changed to study t...The surface dielectric barrier discharge （SDBD） plasma actuator has shown great promise as an aerodynamic flow control device. In this paper, the encapsulated electrode width of a SDBD actuator is changed to study the airflow acceleration behavior. The effects of encapsulated electrode width on the actuator performance are experimentally investigated by measuring the dielectric layer surface potential, time-averaged ionic wind velocity and thrust force. Experimental results show that the airflow velocity and thrust force increase with the encapsulated electrode width. The results can be attributed to the distinct plasma distribution at different encapsulated electrode widths.展开更多
Joining metal to plastic can lighten weight of products to reduce energy consumption.However,it is difficult to achieve high-strength welding between metal and plastic.To address this problem,the methods of surface te...Joining metal to plastic can lighten weight of products to reduce energy consumption.However,it is difficult to achieve high-strength welding between metal and plastic.To address this problem,the methods of surface texture pretreatment and laser irradiation welding was proposed to achieve the high-strength connection of metal and plastic.In this study,with different parameters of laser power and texture morphology,1060 Al with surface texture treatment was joined to polyethylene terephthalate(PET)by laser irradiation welding from metal side.Study showed that as the laser power increased,the tensile shear strength of joints increased first,and decreased thereafter.Tensile shear tests demonstrated that the mechanical force of joint was strengthened contributed to mechanical anchorage formed by surface texture.The depth-width ratio of the texture grooves affected the tensile shear process of the joint.According to the result of temperature simulation,the existence of texture grooves reduced the heat transfer efficiency,and the heat dissipation at interface was also impeded in course of laser welding.Finally,the maximum tensile strength of 1060Al-PET joint reached 48.4 MPa,which was close to the strength of PET matrix.The bonding mechanism of the 1060Al-PET joints was composed of mechanical bonding and chemical bonding.This study proposes an effective method to join metal to plastic which achieved high-strength connection between metal and plastic.展开更多
Laser surface transformation hardening becomes one of the most modern processes used to improve fatigue and wear properties of steel surfaces. In this process, the material properties and the heating parameters are th...Laser surface transformation hardening becomes one of the most modern processes used to improve fatigue and wear properties of steel surfaces. In this process, the material properties and the heating parameters are the factors that present the most significant effects on the hardened surface attributes. The control of these factors using predictive modeling approaches to achieve desired surface properties leads to conclusive results. However, when the dimensions of the surface to be treated are larger than the cross-section of the laser beam, various laser-scanning patterns are involved. This paper presents an experimental investigation of laser surface hardening of AISI 4340 steel using different laser scanning patterns. This investigation is based on a structured experimental design using the Taguchi method and improved statistical analysis tools. Experiments are carried out using a 3 kW Nd: YAG laser source in order to evaluate the effects of the heating parameters and patterns design parameters on the physical and geometrical characteristics of the hardened surface. Laser power, scanning speed and scanning patterns (linear, sinusoidal, triangular and trochoid) are the factors used to evaluate the hardened depth and the hardened width variations and to identify the possible relationship between these factors and the hardened zone attributes. Various statistical tools such as ANOVA, correlations analysis and response surfaces are applied in order to examine the effects of the experimental factors on the hardened surface characteristics. The results reveal that the scanning patterns do not modify the nature of the laser parameters’ effects on the hardened depth and the hardened width. But they can accentuate or reduce these effects depending on the type of the considered pattern. The results show also that the sinusoidal and the triangular patterns are relevant when a maximum hardened width with an acceptable hardened depth is desired.展开更多
A 3D mathematical model is developed to calculate the temperature and velocity distributions in a moving gas tungsten arc (GTA) welding pool with different sulfur concentrations. It has been shown that, the weld penet...A 3D mathematical model is developed to calculate the temperature and velocity distributions in a moving gas tungsten arc (GTA) welding pool with different sulfur concentrations. It has been shown that, the weld penetration increases sharply with increasing sulfur content. When sulfur content increases beyond 80 × 10-6, the increase in sulfur content does not have an appreciable difference on the welding pool size and shape, and the depth/width remains constant. Sulfur changes the temperature dependence of surface tension coefficient from a negative value to a positive value and causes significant changes on flow patterns. The increase in soluble sulfur content and the decrease at free surface temperature can extend the region of positive surface tension coefficient. As sulfur content exceeds 125×10-6, the sign of surface tension coefficient is positive. Depending upon the sulfur concentrations, three, one or two vortexes that have different positions, strength and directions may be found in the welding pool. The contrary vortexes can efficiently transfer the thermal energy from the arc, creating a deep welding pool. An optimum range of sulfur content is 20-150×10-6.展开更多
Based on the vibrational potential curves coupled with the minimum energy reaction path, the partial potential energy surface of the reaction I＋HI→IH＋I was constructed at the QCISD（T）//MP4SDQ level with pseudo po...Based on the vibrational potential curves coupled with the minimum energy reaction path, the partial potential energy surface of the reaction I＋HI→IH＋I was constructed at the QCISD（T）//MP4SDQ level with pseudo potential method. And the formation mechanism of the scattering resonance states of this reaction was well interpreted with the partial potential energy surface. The scattering resonance states of this reaction should belong to Feshbach resonance because of the coupling of the vibrational mode and the translational mode. With the one-dimensional square potential well model, the resonance width and lifetime of the I＋HI（v=0）→IH（v＇=0）＋I state-to-state reaction were calculated, which preferably explained the high-resolved threshold photodetachment spectroscopy of the IHI- anion performed by Neumark et al..展开更多
We study the thermal effect on skin exposed to an electromagnetic beam of time-dependent power. We consider two types of beam power time schedules. In the controlled temperature exposure, the skin surface temperature ...We study the thermal effect on skin exposed to an electromagnetic beam of time-dependent power. We consider two types of beam power time schedules. In the controlled temperature exposure, the skin surface temperature is increased quickly to a prescribed level using a high beam power;then the surface temperature is maintained at the prescribed level by adjusting the beam power adaptively. In the constant power exposure, the applied beam power is relatively low and stays unchanged over the time. We start both types of exposures at the same time and compare their internal temperatures of skin when they have the same surface temperature. In a non-dimensionalized formulation, we show that at the moment when both exposure types reach the same prescribed surface temperature level, the controlled temperature exposure has a higher internal temperature at all depths. This conclusion is mathematically rigorous and is independent of skin material properties.展开更多
Hands-on Mini Lab Wo rk with a partner.the·Trace top and bottom of the can on grid paper.Then cut out the shapes.·Cut a long rectangle from t he grid paper.be The width of the rectangleshould rectangle the s...Hands-on Mini Lab Wo rk with a partner.the·Trace top and bottom of the can on grid paper.Then cut out the shapes.·Cut a long rectangle from t he grid paper.be The width of the rectangleshould rectangle the same as the height of the the can.Wrap the d the side of the can.Cut off aroun the excesspaper so that ofthe edges just meet.1.Make a net the cylinder.2.Name shapes in the net.the circles?the3.How is the length of rectangle related to the4.Explain how tofind the surface area of cylinder.展开更多
Droplet impact on solid surfaces is widely involved in diverse applications such as spray cooling,self-cleaning,and hydrovoltaic technology.Maximum solid‒liquid contact area yielded by droplet spreading is one key par...Droplet impact on solid surfaces is widely involved in diverse applications such as spray cooling,self-cleaning,and hydrovoltaic technology.Maximum solid‒liquid contact area yielded by droplet spreading is one key parameter determining energy conversion between droplets and surfaces.However,for the maximum deformation of impact droplets,the contact length and droplet width are usually mixed indiscriminately,resulting in unignored prediction errors in the maximum contact area.Herein,we investigate and highlight the difference between the maximum contact length and maximum droplet width.The maximum droplet width is never smaller than the maximum contact length,and the difference appears once the contact angle exceeds 90◦(which becomes more significant on superhydrophobic surfaces),regardless of impact velocities,liquid viscosities,and system scales(from macroscale to nanoscale).Atheoretical model analyzing the structure of the spreading rim is proposed to demonstrate and quantitatively predict the above difference,agreeingwell with experimental results.Based on molecular dynamics simulations,the theoretical analysis is further extended to the scenario of nanodroplets impacting on solid surfaces.Reconsideration on themaximum deformation of impact droplets underscores the often-overlooked yet significant difference between maximum values of contact length and droplet width,which is crucial for applications involving droplet‒interface interactions.展开更多
基金supported by the National Natural Science Foundation of China(grant number:52006061)the Key R&D Program of Hunan Province(grant number:2024AQ2001)+2 种基金Scientific Research Program of Hunan Provincial Department of Education(grant number:22B0840)Natural Science Foundation of Hunan Province(grant number:2023JJ50483)Hunan University of Humanities,Science and Technology Graduate Student Research and Innovation Program(ZSCX2024Y06,ZSCX2024Y01).
文摘To address the challenges of poor surface quality and high energy consumption in marble cutting,this study introduces an auxiliary abrasive jet cutting technology enhanced by the use of polyacrylamide(PAM)as a dragreducing additive.The effects of feed rate(50-300 mm/min),polymer concentration(0-0.5 g/L),and nozzle spacing(4-12 mm)on kerf width and surface roughness are systematically investigated through an orthogonal experimental design.Results reveal that feed rate emerges as themost significant factor(p<0.01),followed by PAM concentration and nozzle spacing.The optimal set of parameters,comprising a 200 mm/min feed rate,0.3 g/L PAM concentration,and 6mmnozzle spacing,achieves the narrowest kerf width(0.867 mm)and the lowest surface roughness(10.220μm).Analysis of the underlying mechanisms demonstrates that PAMenhances the energy efficiency of the jet by suppressing turbulent pulsations and increasing fluid viscoelasticity,thereby minimizing energy loss during the cutting process.
文摘Secondary electron emission(SEE)has emerged as a critical issue in next-generation accelerators.Mitigating SEE on metal surfaces is crucial for enhancing the stability and emittance of particle accelerators while extending their lifespan.This paper explores the application of laser-assisted water jet technology in constructing high-quality micro-trap structures on 316L stainless steel,a key material in accelerator manufacturing.The study systematically analyzes the impact of various parameters such as laser repetition frequency,pulse duration,average power,water jet pressure,repeat times,nozzle offset,focal position,offset distance between grooves,and processing speed on the surface morphology of stainless steel.The findings reveal that micro-groove depth increases with higher laser power but decreases with increasing water jet pressure and processing speed.Interestingly,repeat times have minimal effect on depth.On the other hand,micro-groove width increases with higher laser power and repeat times but decreases with processing speed.By optimizing these parameters,the researchers achieved high-quality pound sign-shaped trap structure with consistent dimensions.We tested the secondary electron emission coefficient of the"well"structure.The coefficient is reduced by 0.5 at most compared to before processing,effectively suppressing secondary electron emission.These results offer indispensable insights for the fabrication of micro-trap structures on material surfaces.Laser-assisted water jet technology demonstrates considerable potential in mitigating SEE on metal surfaces.
基金supported by National Natural Science Foundation of China(No.11175037)National Natural Science Foundation for Young Scientists of China(No.11305017)Special Fund for Theoretical Physics(No.11247239)
文摘The surface dielectric barrier discharge （SDBD） plasma actuator has shown great promise as an aerodynamic flow control device. In this paper, the encapsulated electrode width of a SDBD actuator is changed to study the airflow acceleration behavior. The effects of encapsulated electrode width on the actuator performance are experimentally investigated by measuring the dielectric layer surface potential, time-averaged ionic wind velocity and thrust force. Experimental results show that the airflow velocity and thrust force increase with the encapsulated electrode width. The results can be attributed to the distinct plasma distribution at different encapsulated electrode widths.
基金Supported by Natural Science Foundation of Jilin Province,China(20200201230JC).
文摘Joining metal to plastic can lighten weight of products to reduce energy consumption.However,it is difficult to achieve high-strength welding between metal and plastic.To address this problem,the methods of surface texture pretreatment and laser irradiation welding was proposed to achieve the high-strength connection of metal and plastic.In this study,with different parameters of laser power and texture morphology,1060 Al with surface texture treatment was joined to polyethylene terephthalate(PET)by laser irradiation welding from metal side.Study showed that as the laser power increased,the tensile shear strength of joints increased first,and decreased thereafter.Tensile shear tests demonstrated that the mechanical force of joint was strengthened contributed to mechanical anchorage formed by surface texture.The depth-width ratio of the texture grooves affected the tensile shear process of the joint.According to the result of temperature simulation,the existence of texture grooves reduced the heat transfer efficiency,and the heat dissipation at interface was also impeded in course of laser welding.Finally,the maximum tensile strength of 1060Al-PET joint reached 48.4 MPa,which was close to the strength of PET matrix.The bonding mechanism of the 1060Al-PET joints was composed of mechanical bonding and chemical bonding.This study proposes an effective method to join metal to plastic which achieved high-strength connection between metal and plastic.
文摘Laser surface transformation hardening becomes one of the most modern processes used to improve fatigue and wear properties of steel surfaces. In this process, the material properties and the heating parameters are the factors that present the most significant effects on the hardened surface attributes. The control of these factors using predictive modeling approaches to achieve desired surface properties leads to conclusive results. However, when the dimensions of the surface to be treated are larger than the cross-section of the laser beam, various laser-scanning patterns are involved. This paper presents an experimental investigation of laser surface hardening of AISI 4340 steel using different laser scanning patterns. This investigation is based on a structured experimental design using the Taguchi method and improved statistical analysis tools. Experiments are carried out using a 3 kW Nd: YAG laser source in order to evaluate the effects of the heating parameters and patterns design parameters on the physical and geometrical characteristics of the hardened surface. Laser power, scanning speed and scanning patterns (linear, sinusoidal, triangular and trochoid) are the factors used to evaluate the hardened depth and the hardened width variations and to identify the possible relationship between these factors and the hardened zone attributes. Various statistical tools such as ANOVA, correlations analysis and response surfaces are applied in order to examine the effects of the experimental factors on the hardened surface characteristics. The results reveal that the scanning patterns do not modify the nature of the laser parameters’ effects on the hardened depth and the hardened width. But they can accentuate or reduce these effects depending on the type of the considered pattern. The results show also that the sinusoidal and the triangular patterns are relevant when a maximum hardened width with an acceptable hardened depth is desired.
基金The authors would like to acknowledge the financial sup-port from the 973 State Key Fundamental Research Project:Fundamental Research of New Generation Iron and Steel Ma-terials(No.G1998061500).
文摘A 3D mathematical model is developed to calculate the temperature and velocity distributions in a moving gas tungsten arc (GTA) welding pool with different sulfur concentrations. It has been shown that, the weld penetration increases sharply with increasing sulfur content. When sulfur content increases beyond 80 × 10-6, the increase in sulfur content does not have an appreciable difference on the welding pool size and shape, and the depth/width remains constant. Sulfur changes the temperature dependence of surface tension coefficient from a negative value to a positive value and causes significant changes on flow patterns. The increase in soluble sulfur content and the decrease at free surface temperature can extend the region of positive surface tension coefficient. As sulfur content exceeds 125×10-6, the sign of surface tension coefficient is positive. Depending upon the sulfur concentrations, three, one or two vortexes that have different positions, strength and directions may be found in the welding pool. The contrary vortexes can efficiently transfer the thermal energy from the arc, creating a deep welding pool. An optimum range of sulfur content is 20-150×10-6.
基金Ⅴ. ACKN0WLEDGMENTS This work was supported by the National Natural Science Foundation of China （No.20573064） and Ph.D. Special Research Foundation of Chinese Education Department.
文摘Based on the vibrational potential curves coupled with the minimum energy reaction path, the partial potential energy surface of the reaction I＋HI→IH＋I was constructed at the QCISD（T）//MP4SDQ level with pseudo potential method. And the formation mechanism of the scattering resonance states of this reaction was well interpreted with the partial potential energy surface. The scattering resonance states of this reaction should belong to Feshbach resonance because of the coupling of the vibrational mode and the translational mode. With the one-dimensional square potential well model, the resonance width and lifetime of the I＋HI（v=0）→IH（v＇=0）＋I state-to-state reaction were calculated, which preferably explained the high-resolved threshold photodetachment spectroscopy of the IHI- anion performed by Neumark et al..
文摘We study the thermal effect on skin exposed to an electromagnetic beam of time-dependent power. We consider two types of beam power time schedules. In the controlled temperature exposure, the skin surface temperature is increased quickly to a prescribed level using a high beam power;then the surface temperature is maintained at the prescribed level by adjusting the beam power adaptively. In the constant power exposure, the applied beam power is relatively low and stays unchanged over the time. We start both types of exposures at the same time and compare their internal temperatures of skin when they have the same surface temperature. In a non-dimensionalized formulation, we show that at the moment when both exposure types reach the same prescribed surface temperature level, the controlled temperature exposure has a higher internal temperature at all depths. This conclusion is mathematically rigorous and is independent of skin material properties.
文摘Hands-on Mini Lab Wo rk with a partner.the·Trace top and bottom of the can on grid paper.Then cut out the shapes.·Cut a long rectangle from t he grid paper.be The width of the rectangleshould rectangle the same as the height of the the can.Wrap the d the side of the can.Cut off aroun the excesspaper so that ofthe edges just meet.1.Make a net the cylinder.2.Name shapes in the net.the circles?the3.How is the length of rectangle related to the4.Explain how tofind the surface area of cylinder.
基金China Postdoctoral Science Foundation,Grant/Award Numbers:2023TQ0210,GZB20230403Beijing Natural Science Foundation,Grant/Award Number:3242018National Natural Science Foundation of China,Grant/Award Number:52406104。
文摘Droplet impact on solid surfaces is widely involved in diverse applications such as spray cooling,self-cleaning,and hydrovoltaic technology.Maximum solid‒liquid contact area yielded by droplet spreading is one key parameter determining energy conversion between droplets and surfaces.However,for the maximum deformation of impact droplets,the contact length and droplet width are usually mixed indiscriminately,resulting in unignored prediction errors in the maximum contact area.Herein,we investigate and highlight the difference between the maximum contact length and maximum droplet width.The maximum droplet width is never smaller than the maximum contact length,and the difference appears once the contact angle exceeds 90◦(which becomes more significant on superhydrophobic surfaces),regardless of impact velocities,liquid viscosities,and system scales(from macroscale to nanoscale).Atheoretical model analyzing the structure of the spreading rim is proposed to demonstrate and quantitatively predict the above difference,agreeingwell with experimental results.Based on molecular dynamics simulations,the theoretical analysis is further extended to the scenario of nanodroplets impacting on solid surfaces.Reconsideration on themaximum deformation of impact droplets underscores the often-overlooked yet significant difference between maximum values of contact length and droplet width,which is crucial for applications involving droplet‒interface interactions.
