In this study,we fabricated a NiOx film by electrodeposition of an ethanediamine nickel complex precursor(pH=11)on a fluorine‐doped tin oxide substrate.The resulting film is robust and exhibits high catalytic activit...In this study,we fabricated a NiOx film by electrodeposition of an ethanediamine nickel complex precursor(pH=11)on a fluorine‐doped tin oxide substrate.The resulting film is robust and exhibits high catalytic activity for electrochemical water oxidation.Water oxidation is initiated with an overpotential of375mV(1mA/cm2)and a steady current density of8.5mA/cm2is maintained for at least10h at1.3V versus the normal hydrogen electrode.Kinetic analysis reveals that there is a2e?/3H+pre‐equilibrium process before the chemical rate‐determining step.The low‐cost preparation,robustness,and longevity make this catalyst competitive for applications in solar energy conversion and storage.展开更多
Quasi-one-dimensional NiO with a hierarchically porous structure was synthesized through a facile coordination−precipitation method with the coupling effect of ammonia and a post-calcination treatment.The electrocatal...Quasi-one-dimensional NiO with a hierarchically porous structure was synthesized through a facile coordination−precipitation method with the coupling effect of ammonia and a post-calcination treatment.The electrocatalytic properties of NiO fibers for the oxidation of ethanol were compared with those of NiO spheres.The results show that the fibrous NiO possesses a larger specific surface area of 140.153 m2/g and a lower electrical resistivity of 4.5×105Ω·m,leading to an impressively superior electrocatalytic activity to spherical NiO for ethanol oxidation in alkaline media.The current decay on fibrous NiO at 0.6 V in 100−900 s was 0.00003%,which is much lower than that of spherical NiO,indicating its better stability.The unique morphology and hierarchically porous structure give the fibrous NiO great potential to be used as an anodic electrocatalyst for direct ethanol fuel cells.展开更多
The rapid industrial growth and increasing population have led to significant pollution and deterioration of the natural atmospheric environment.Major atmospheric pollutants include NO_(2)and CO_(2).Hence,it is impera...The rapid industrial growth and increasing population have led to significant pollution and deterioration of the natural atmospheric environment.Major atmospheric pollutants include NO_(2)and CO_(2).Hence,it is imperative to develop NO_(2)and CO_(2)sensors for ambient conditions,that can be used in indoor air quality monitoring,breath analysis,food spoilage detection,etc.In the present study,two thin film nanocomposite(nickel oxide-graphene and nickel oxide-silver nanowires)gas sensors are fabricated using direct ink writing.The nano-composites are investigated for their structural,optical,and electrical properties.Later the nano-composite is deposited on the interdigitated electrode(IDE)pattern to form NO_(2)and CO_(2)sensors.The deposited films are then exposed to NO_(2)and CO_(2)gases separately and their response and recovery times are determined using a custom-built gas sensing setup.Nickel oxide-graphene provides a good response time and recovery time of 10 and 9 s,respectively for NO_(2),due to the higher electron affinity of graphene towards NO_(2).Nickel oxide-silver nanowire nano-composite is suited for CO_(2)gas because silver is an excellent electrocatalyst for CO_(2)by giving response and recovery times of 11 s each.This is the first report showcasing NiO nano-composites for NO_(2)and CO_(2)sensing at room temperature.展开更多
Developing high-capacity carbon-based anode materials is crucial for enhancing the performance of lithium-ion batteries(LIBs).In this study,we presented a nitrogen-doped lignin mesoporous carbon/nickel/nickel oxide(NH...Developing high-capacity carbon-based anode materials is crucial for enhancing the performance of lithium-ion batteries(LIBs).In this study,we presented a nitrogen-doped lignin mesoporous carbon/nickel/nickel oxide(NHMC/Ni/NiO)nanocomposite for developing high-capacity LIBs anode materials through carbonization and selective etching strategies.The synthesized NMHC/Ni/NiO-0.33 composite exhibited a highly regular microstructure with well-dispersed Ni/NiO particles.The composite had a surface area of 408 m^(2)·g^(−1),a mesopore ratio of 75.0%,and a pyridine–nitrogen ratio of 58.9%.The introduction of nitrogen atoms reduced the disordered structure of lignin mesoporous carbon and enhanced its electrical conductivity,thus improving the lithium storage capabilities of the composite.Following 100 cycles at a current density of 0.2 A·g^(−1),the composite demonstrated enhanced Coulomb efficiency and rate performance,achieving a specific discharge capacity of 1230.9 mAh·g^(−1).At a high-current density of 1 A·g^(−1),the composite exhibited an excellent specific discharge capacity of 714.6 mAh·g^(−1).This study presents an innovative method for synthesizing high-performance anode materials of LIBs.展开更多
Formaldehyde(HCHO),a significant indoor air pollutant,poses serious health risks to humans,making its removal a critical issue.Among the various methods for HCHO elimination,catalytic oxidation has emerged as one of t...Formaldehyde(HCHO),a significant indoor air pollutant,poses serious health risks to humans,making its removal a critical issue.Among the various methods for HCHO elimination,catalytic oxidation has emerged as one of the most efficient and practical approaches.In this study,hierarchical hollow nickel oxide nanofibers(NiO–HNF)are developed by using a semi-sacrificial template-assisted hydrothermal and calcination process.Platinum(Pt)nanoparticles are then loaded onto the NiO–HNF through an impregnation-chemical reduction process.The Pt/NiO–HNF nanocomposite demonstrates a marked improvement in HCHO decomposition activity at room temperature,which can be ascribed to its distinct structural features.The hierarchical structure of the nanocomposite,which provides a high specific surface area and abundant porosity,facilitates the uniform dispersion of Pt nanoparticles and increases the number of active sites available for catalysis.To further investigate the oxidation mechanism,in-situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRIFTS)is utilized.The findings suggest that the main intermediates during the oxidation process are dioxymethylene and formate species.This study highlights the potential of hollow transition metal oxide composites as efficient materials for the removal of indoor air pollutants.展开更多
Inverted perovskite solar cells(PSCs)have stood out in recent years for their great potential in offering low-temperature compatibility,long-term stability and tandem cell suitability.However,challenges persist,partic...Inverted perovskite solar cells(PSCs)have stood out in recent years for their great potential in offering low-temperature compatibility,long-term stability and tandem cell suitability.However,challenges persist,particularly concerning the use of nickel oxide nanoparticles(NiO_(x)NPs)as the hole transport material,where issues such as low conductivity,impurity-induced aggregation and interface redox reactions significantly hinder device performance.In response,this study presents a novel synthesis method for NiO_(x)NPs,leveraging the introduction of ammonium salt dopants(NH_(4)Cl and NH_(4)SCN),and the solar cell utilizing the doped NiO_(x)substrate exhibits much enhanced device performance.Furthermore,doped solar cells reach 23.27%power conversion efficiency(PCE)when a self-assembled monolayer(SAM)is further employed.This study provides critical insights into the synthesis and growth pathways of NiO_(x)NPs,propelling the development of efficient hole transport materials for high-performance PSCs.展开更多
To obtain the appropriate conditions for eliminating Fe3＋from NiSO4 solution, the digestion solution of the clinker was used as raw material, which was obtained from roasting the nickel oxide ore with （NH4）2SO4. Th...To obtain the appropriate conditions for eliminating Fe3＋from NiSO4 solution, the digestion solution of the clinker was used as raw material, which was obtained from roasting the nickel oxide ore with （NH4）2SO4. The ammonium jarosite was successfully synthesized from the solution with analytic grade NH4HCO3. The effects of reaction temperature, reaction time, end pH value of reaction on the removal rate of iron were investigated, and the effect of the initial concentration of Fe3＋was also discussed. All of those factors had significant effects on the removal rate of Fe3＋, among which the reaction temperature was the most prominent. The appropriate reaction conditions were concluded as follows： reaction temperature 95 ℃ reaction time 3.5 h, end pH value of reaction 2.5 at initial concentration of Fe3＋19.36 g/L. The physical aspect of （NH4）2Fe6（SO4）4（OH）12 was cluster figure composed of sheet or prismatic particles with smooth surface.展开更多
The oxidation of porous Ni-yttria-stabilized zirconia(YSZ)and Ni-gadolinia-doped ceria(GDC)ceramicmetal(cermet)electrodes in H_(2)O and CO_(2)atmospheres was studied by near-ambient pressure X-ray photoelectron spectr...The oxidation of porous Ni-yttria-stabilized zirconia(YSZ)and Ni-gadolinia-doped ceria(GDC)ceramicmetal(cermet)electrodes in H_(2)O and CO_(2)atmospheres was studied by near-ambient pressure X-ray photoelectron spectroscopy(NAP-XPS).We show that the oxidation of nickel by the two gases is not similar,as is commonly believed,but it depends on the ceramic type.Nickel is vulnerable to oxidation in H_(2)O but it resists to CO_(2)in Ni-GDC,as compared to the Ni-YSZ electrode.Inspired by this observation we conceptualize and fabricate Ni-YSZ electrodes modified by ceria nanoparticles,which show significantly higher resistance to CO_(2)oxidation as compared with conventional Ni-YSZ electrodes.The preparation of tailormade cermet electrodes with identical bulk/mechanical characteristics but very different surface properties offers a promising fabrication strategy for high-performance and durability solid oxide electrolysis cells for CO_(2)conversion.展开更多
A nanocomposite of nickel oxide/carbon nanotubes was prepared through a simple chemical precipitation followed by thermal annealing. The electrochemical capacitance of this electrode material was studied. When the mas...A nanocomposite of nickel oxide/carbon nanotubes was prepared through a simple chemical precipitation followed by thermal annealing. The electrochemical capacitance of this electrode material was studied. When the mass fraction of CNTs (carbon nanotubes) in NiO/CNT composites increases, the electrical resistivity of nanocomposites decreases and becomes similar to that of pure CNTs when it reaches 30%. The specific surface area of composites increases with increasing CNT mass fraction and the specific capacitance reaches 160 F/g under 10 mA/g discharge current density at CNT mass fraction of 10%.展开更多
The emergence of inverted perovskite solar cells(PSCs) has attached great attention derived from the potential in improving stability. Charge transporting layer, especially hole transporting layer is crucial for effic...The emergence of inverted perovskite solar cells(PSCs) has attached great attention derived from the potential in improving stability. Charge transporting layer, especially hole transporting layer is crucial for efficient inverted PSCs. Organic materials were used as hole transporting layer previously. Recently, more and more inorganic hole transporting materials have been deployed for further improving the device stability. Nickel oxide(NiOx) as p-type metal oxide, owning high charge mobility and intrinsic stability,has been widely adopted in inverted PSCs. High performance over 20% efficiency has been achieved on NiOx base inverted PSCs. Herein, we have summarized recent progresses and strategies on the NiOx based PSCs, including the synthesis or deposition methods of NiOx, doping and surface modification of NiOx for efficient and stable PSCs. Finally, we will discuss current challenges of utilizing NiOx HTLs in PSCs and attempt to give probable solutions to make further development in efficient as well as stable NiOx based PSCs.展开更多
In this study, coral?like yolk–shell?structured NiO/C composite microspheres(denoted as CYS?NiO/C) were prepared using spray pyrolysis. The unique yolk–shell structure was characterized, and the formation mechanism ...In this study, coral?like yolk–shell?structured NiO/C composite microspheres(denoted as CYS?NiO/C) were prepared using spray pyrolysis. The unique yolk–shell structure was characterized, and the formation mechanism of the structure was proposed. Both the phase separation of the polyvinylpyrrolidone and polystyrene(PS) colloidal solution and the decompo?sition of the size?controlled PS nanobeads in the droplet played crucial roles in the formation of the unique coral?like yolk–shell structure. The CYS?NiO/C microspheres delivered a reversible discharge capacity of 991 mAh g^(-1) after 500 cycles at the current density of 1.0 A g^(-1). The dis?charge capacity of the CYS?NiO/C microspheres after the 1000 th cycle at the current density of 2.0 A g^(-1) was 635 mAh g^(-1), and the capacity retention measured from the second cycle was 91%. The final discharge capacities of the CYS?NiO/C microspheres at the current densities of 0.5, 1.5, 3.0, 5.0, 7.0, and 10.0 A g^(-1) were 753, 648, 560, 490, 440, and 389 mAh g^(-1), respectively. The synergetic e ect of the coral?like yolk–shell structure with well?defined interconnected mesopores and highly conductive carbon resulted in the excellent Li+?ion storage properties of the CYS?NiO/C microspheres.展开更多
The effect of nickel on the ion-selective property of the rust layers formed on the low alloy weathering steels under marine atmosphere was investigated by an alternate wet-dry accelerated corrosion test. Four types o...The effect of nickel on the ion-selective property of the rust layers formed on the low alloy weathering steels under marine atmosphere was investigated by an alternate wet-dry accelerated corrosion test. Four types of low-alloying steels with different Ni contents were prepared for the corrosion test. The rust formed at various stages of corrosion was characterized by electrochemical impedance spectra （EIS）, electron microprobe analysis （EMPA） and scanning electron microscopy （SEM）. Afterwards, the corrosion resistance property of the rust was studied in the light of the exper- imental results. It is shown that increasing Ni content has significantly improved the corrosion resistance of the low-alloying steels under marine atmosphere. Further- more, it is noted that an evident cation-selective property emerges in the rust layers with the Ni content of the rust layers up to 1.82%. However, when the Ni content of steel the matrix is below 1.5%, it has little effect on the cation-selective property. The ratio of Ni content in between the rust layer and the steel substrate decreases with the increase of Ni content in the steel substrate and varies little as the corrosion proceeds.展开更多
The carbon and nickel oxide/carbon composite electrodes were prepared by plasma jet and magnetron sput-tering techniques. The investigations were performed to evaluate the influence of the Ar/C2H2 ratio on the specifi...The carbon and nickel oxide/carbon composite electrodes were prepared by plasma jet and magnetron sput-tering techniques. The investigations were performed to evaluate the influence of the Ar/C2H2 ratio on the specific capacitance values of carbon and NiO/carbon electrodes. The obtained electrodes were investigated by scanning electron microscopy, Raman scattering spectroscopy （RS）, and X-ray diffraction techniques. The surface of the carbon electrodes became less porous and more homogenous with increasing Ar/C2H2. The RS results indicated that the fraction of the sp2 carbon sites increased with increasing Ar/C2H2 ratio. The increase of the Ar/C2H2 ratio increased the capacitance values from 0.73 up to 3.8 F/g. Meanwhile, after the deposition of the nickel oxide on the carbon, the capacitance increased ten and more times and varied in the range of 7.6-86.1 F/g.展开更多
Semiconductor metal oxides have attracted wide attention in the area of gas sensor due to that they have unique advantages in the rapid and accurate detection of harmful gases.A simple strategy is to synthesize porous...Semiconductor metal oxides have attracted wide attention in the area of gas sensor due to that they have unique advantages in the rapid and accurate detection of harmful gases.A simple strategy is to synthesize porous NiO hollow microspheres via a simple hydrothermal method with trisodium citrate as structure guide agent is presented in this paper,and the shell of the microsphere is composed of porous and lamellar assembly units.The cavity proportion can be adjusted by changing the amount of trisodium citrate.A reasonable mechanism was proposed to explain the formation of porous NiO hollow microspheres.As a gas-sensing material,porous NiO hollow microspheres show excellent gas selectivity and rapid response recovery time for n-butyl alcohol gas.When the content of trisodium citrate was 0.10 g,the synthesized hollow sphere NiO had the highest response value(25.6)to 100×10^(-6) of n-butyl alcohol at 300℃ and the response and recovery times were only 68 and 10 s.展开更多
In this research,new catalyst with high industrial impact is developed,which can catalyze the conversion of CO2 to methane through methanation reaction.A series of catalysts based on nickel oxide were prepared using w...In this research,new catalyst with high industrial impact is developed,which can catalyze the conversion of CO2 to methane through methanation reaction.A series of catalysts based on nickel oxide were prepared using wetness impregnation technique and ageing,followed by calcination at 400℃.Rh/Ni（30：70）/Al2O3 catalyst was revealed as the most potential catalyst based on the results of catalytic activity measurement monitored by Fourier Transform Infrared Spectroscopy（FTIR）and Gas Chromatography（GC）.The results showed 90.1%CO2 conversion and 70.8% yield at 400℃.展开更多
The preparation of Ni oxide films and their capacitive mechanism are discussed in this paper. Nickel oxide film electrodes perform pseudocapacitance in aqueous KOH and NaOH but perform double layer capacitance in LiCI...The preparation of Ni oxide films and their capacitive mechanism are discussed in this paper. Nickel oxide film electrodes perform pseudocapacitance in aqueous KOH and NaOH but perform double layer capacitance in LiCIO4/PC (propylence carbonate). The effect of increasing the specific capacitance was observed when Ni oxide film electrodes are doped with Co. A specific capacitance of around 70 F/g was achieved when using Ni oxide films doped with Co as electrodes and 1 mol/L aqueous KOH or NaOH as an electrolyte.展开更多
Thermal stability has long been recognized as a major limitation for the application of ligand modification in high-temperature reactions. Herein, we demonstrate polymeric phosphate as an efficient and stable ligand t...Thermal stability has long been recognized as a major limitation for the application of ligand modification in high-temperature reactions. Herein, we demonstrate polymeric phosphate as an efficient and stable ligand to tune the selectivity of propane oxidative dehydrogenation. Beneficial from the weakened affinity of propene, NiO modified with polymeric phosphate shows a selectivity 2–3 times higher than NiO towards the production of propene. The success of this regulation verifies the feasibility of ligand modification in high-temperature gas-phase reactions and shines a light on its applications in other important industrial reactions.展开更多
The d-band state of materials is an important descriptor for activity of oxygen evolution reaction(OER).For NiO materials,there is rarely concern about tuning their d-band states to tailor the OER behaviors.Herein,NiO...The d-band state of materials is an important descriptor for activity of oxygen evolution reaction(OER).For NiO materials,there is rarely concern about tuning their d-band states to tailor the OER behaviors.Herein,NiO nanocrystals with doping small amount of La^(3+)were used to regulate d-band states for promoting OER activity.Density of states calculations based on density functional theory revealed that La^(3+)doping produced upper shift of d-band center,which would induce stronger electronic interaction between surface Ni atoms and species of oxygen evolution reaction intermediates.Further density functional theory calculation illustrated that La^(3+)doped NiO possessed reduced Gibbs free energy in adsorbing species of OER intermediate.Predicted by theoretical calculations,trace La^(3+)was introduced into crystal lattice of NiO nanoparticles.The La^(3+)doped NiO nanocrystal showed much promoted OER activity than corresponding pristine NiO product.Further electrochemical analysis revealed that La^(3+)doping into NiO increased the intrinsic activity such as improved active sites and reduced charge transfer resistance.The in-situ Raman spectra suggested that NiO phase in La^(3+)doped NiO could be better maintained than pristine NiO during the OER.This work provides an effective strategy to tune the d-band center of NiO for efficient electrocatalytic OER.展开更多
The effect of Na-excess content in the precursor on the structural and electrochemical performances of sodium nickel manganese oxide(NNMO)prepared by sol-gel and electrospinning methods is investigated in this paper.X...The effect of Na-excess content in the precursor on the structural and electrochemical performances of sodium nickel manganese oxide(NNMO)prepared by sol-gel and electrospinning methods is investigated in this paper.X-ray diffraction results of the prepared NNMO without adding Na-excess content indicate sodium loss,while the mixed phase of P2/O′3-type layered NNMO presented after adding Na-excess content.Compared with the sol-gel method,the secondary phase of NiO is more suppressed by using the electrospinning method,which is further confirmed by field emission scanning electron microscope images.N_(2) adsorption-desorption isotherms show no remarkably difference in specific surface areas between different preparation methods and Na-excess contents.The analysis of X-ray absorption near edge structure indicates that the oxidation states of Ni and Mn are+2 and+4,respectively.For the electrochemical properties,superior electrochemical performance is observed in the NNMO electrode with a low Na-excess content of 5wt%.The highest specific capacitance is 36.07 F·g^(-1)at0.1 A·g^(-1)in the NNMO electrode prepared by using the sol-gel method.By contrast,the NNMO electrode prepared using the electrospinning method with decreased Na-excess content shows excellent cycling stability of 100%after charge-discharge measurements for 300 cycles.Therefore,controlling the Na excess in the precursor together with the preparation method is important for improving the electrochemical performance of Na-based electrode materials in supercapacitors.展开更多
A new type of calcium-based regenerable carbon dioxide （CO_2） sorbent, CaO-NiO, was synthesized via the sol-gel method. The as synthesized CO_2 sorbent was in the form of nanoparticles. The CO_2 sorption temperature...A new type of calcium-based regenerable carbon dioxide （CO_2） sorbent, CaO-NiO, was synthesized via the sol-gel method. The as synthesized CO_2 sorbent was in the form of nanoparticles. The CO_2 sorption temperature and capacity of the sorbent were examined using thermogravi- metric analysis （TGA）. The CaO-NiO sorbent is able to capture CO_2 at a lower sorption temperature （465 ℃） than pure calcium oxide （CaO） （600 ℃）. The role of NiO in the CaO-NiO sorbent in lowering the CO_2 sorption temperature was also investigated. The sorbent was char- acterized by X-ray diffractometer （XRD）, N_2 adsorption-desorption analysis, high resolution transmission electron microscopy （HRTEM） and scanning electron microscopy （SEM）. CaO and NiO were found to coexist in the sorbent. Neither solid solution nor mixed metal oxide was formed. NiO did not react with CO_2 in the sorption process; but it worked like a catalyst to promote the CaO carbonation reaction. It is suggested that this new CaO-NiO sorbent may have a promising application as an effective CO_2 sorbent with lower energy consumption.展开更多
基金supported by the National Basic Research Program of China(973 program,2014CB239402)the National Natural Science Foundation of China(21476043)the Swedish Energy Agency and K&A Wallenberg Foundation~~
文摘In this study,we fabricated a NiOx film by electrodeposition of an ethanediamine nickel complex precursor(pH=11)on a fluorine‐doped tin oxide substrate.The resulting film is robust and exhibits high catalytic activity for electrochemical water oxidation.Water oxidation is initiated with an overpotential of375mV(1mA/cm2)and a steady current density of8.5mA/cm2is maintained for at least10h at1.3V versus the normal hydrogen electrode.Kinetic analysis reveals that there is a2e?/3H+pre‐equilibrium process before the chemical rate‐determining step.The low‐cost preparation,robustness,and longevity make this catalyst competitive for applications in solar energy conversion and storage.
基金Project(51404306)supported by the National Natural Science Foundation of ChinaProject(JNJJ201613)supported by Jiana Foundation of Central South University,ChinaProject(2017YFC0210401)supported by the National Key Research and Development Program of China。
文摘Quasi-one-dimensional NiO with a hierarchically porous structure was synthesized through a facile coordination−precipitation method with the coupling effect of ammonia and a post-calcination treatment.The electrocatalytic properties of NiO fibers for the oxidation of ethanol were compared with those of NiO spheres.The results show that the fibrous NiO possesses a larger specific surface area of 140.153 m2/g and a lower electrical resistivity of 4.5×105Ω·m,leading to an impressively superior electrocatalytic activity to spherical NiO for ethanol oxidation in alkaline media.The current decay on fibrous NiO at 0.6 V in 100−900 s was 0.00003%,which is much lower than that of spherical NiO,indicating its better stability.The unique morphology and hierarchically porous structure give the fibrous NiO great potential to be used as an anodic electrocatalyst for direct ethanol fuel cells.
文摘The rapid industrial growth and increasing population have led to significant pollution and deterioration of the natural atmospheric environment.Major atmospheric pollutants include NO_(2)and CO_(2).Hence,it is imperative to develop NO_(2)and CO_(2)sensors for ambient conditions,that can be used in indoor air quality monitoring,breath analysis,food spoilage detection,etc.In the present study,two thin film nanocomposite(nickel oxide-graphene and nickel oxide-silver nanowires)gas sensors are fabricated using direct ink writing.The nano-composites are investigated for their structural,optical,and electrical properties.Later the nano-composite is deposited on the interdigitated electrode(IDE)pattern to form NO_(2)and CO_(2)sensors.The deposited films are then exposed to NO_(2)and CO_(2)gases separately and their response and recovery times are determined using a custom-built gas sensing setup.Nickel oxide-graphene provides a good response time and recovery time of 10 and 9 s,respectively for NO_(2),due to the higher electron affinity of graphene towards NO_(2).Nickel oxide-silver nanowire nano-composite is suited for CO_(2)gas because silver is an excellent electrocatalyst for CO_(2)by giving response and recovery times of 11 s each.This is the first report showcasing NiO nano-composites for NO_(2)and CO_(2)sensing at room temperature.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.22278092,22078116 and 22222805)Guangdong Provincial Key Research and Development Program(No.2020B1111380002)+2 种基金Science and Technology Research Project of Guangzhou(Nos.2023A03J0034,2023A04J0077 and 202102020467)State Key Laboratory of Pulp and Paper Engineering(No.202313)Key Discipline of Materials Science and Engineering,Bureau of Education of Guangzhou(No.202255464).
文摘Developing high-capacity carbon-based anode materials is crucial for enhancing the performance of lithium-ion batteries(LIBs).In this study,we presented a nitrogen-doped lignin mesoporous carbon/nickel/nickel oxide(NHMC/Ni/NiO)nanocomposite for developing high-capacity LIBs anode materials through carbonization and selective etching strategies.The synthesized NMHC/Ni/NiO-0.33 composite exhibited a highly regular microstructure with well-dispersed Ni/NiO particles.The composite had a surface area of 408 m^(2)·g^(−1),a mesopore ratio of 75.0%,and a pyridine–nitrogen ratio of 58.9%.The introduction of nitrogen atoms reduced the disordered structure of lignin mesoporous carbon and enhanced its electrical conductivity,thus improving the lithium storage capabilities of the composite.Following 100 cycles at a current density of 0.2 A·g^(−1),the composite demonstrated enhanced Coulomb efficiency and rate performance,achieving a specific discharge capacity of 1230.9 mAh·g^(−1).At a high-current density of 1 A·g^(−1),the composite exhibited an excellent specific discharge capacity of 714.6 mAh·g^(−1).This study presents an innovative method for synthesizing high-performance anode materials of LIBs.
基金supported by the Guangxi Science and Technology Major Program(AA24263054)the National Natural Science Foundation of China(52472245 and 22278324).
文摘Formaldehyde(HCHO),a significant indoor air pollutant,poses serious health risks to humans,making its removal a critical issue.Among the various methods for HCHO elimination,catalytic oxidation has emerged as one of the most efficient and practical approaches.In this study,hierarchical hollow nickel oxide nanofibers(NiO–HNF)are developed by using a semi-sacrificial template-assisted hydrothermal and calcination process.Platinum(Pt)nanoparticles are then loaded onto the NiO–HNF through an impregnation-chemical reduction process.The Pt/NiO–HNF nanocomposite demonstrates a marked improvement in HCHO decomposition activity at room temperature,which can be ascribed to its distinct structural features.The hierarchical structure of the nanocomposite,which provides a high specific surface area and abundant porosity,facilitates the uniform dispersion of Pt nanoparticles and increases the number of active sites available for catalysis.To further investigate the oxidation mechanism,in-situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRIFTS)is utilized.The findings suggest that the main intermediates during the oxidation process are dioxymethylene and formate species.This study highlights the potential of hollow transition metal oxide composites as efficient materials for the removal of indoor air pollutants.
基金supported by the Open Research Fund of Songshan Lake Materials Laboratory(No.2021SLABFK09)the National Natural Science Foundation of China(No.22109093)+1 种基金the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning and the Shanghai Rising-Star Program(No.19QA1403800)the Project of Innovative Development Agency of Republic of Uzbekistan(No.FZ-20200929177)and Shanghai Technical Service Computing Center of Science and Engineering,Shanghai University.
文摘Inverted perovskite solar cells(PSCs)have stood out in recent years for their great potential in offering low-temperature compatibility,long-term stability and tandem cell suitability.However,challenges persist,particularly concerning the use of nickel oxide nanoparticles(NiO_(x)NPs)as the hole transport material,where issues such as low conductivity,impurity-induced aggregation and interface redox reactions significantly hinder device performance.In response,this study presents a novel synthesis method for NiO_(x)NPs,leveraging the introduction of ammonium salt dopants(NH_(4)Cl and NH_(4)SCN),and the solar cell utilizing the doped NiO_(x)substrate exhibits much enhanced device performance.Furthermore,doped solar cells reach 23.27%power conversion efficiency(PCE)when a self-assembled monolayer(SAM)is further employed.This study provides critical insights into the synthesis and growth pathways of NiO_(x)NPs,propelling the development of efficient hole transport materials for high-performance PSCs.
基金Project(51204054)supported by the National Natural Science Foundation of ChinaProject(N110402012)supported by Fundamental Research Funds for the Central Universities,ChinaProject(2007CB613603)supported by the National Basic Research Program of China
文摘To obtain the appropriate conditions for eliminating Fe3＋from NiSO4 solution, the digestion solution of the clinker was used as raw material, which was obtained from roasting the nickel oxide ore with （NH4）2SO4. The ammonium jarosite was successfully synthesized from the solution with analytic grade NH4HCO3. The effects of reaction temperature, reaction time, end pH value of reaction on the removal rate of iron were investigated, and the effect of the initial concentration of Fe3＋was also discussed. All of those factors had significant effects on the removal rate of Fe3＋, among which the reaction temperature was the most prominent. The appropriate reaction conditions were concluded as follows： reaction temperature 95 ℃ reaction time 3.5 h, end pH value of reaction 2.5 at initial concentration of Fe3＋19.36 g/L. The physical aspect of （NH4）2Fe6（SO4）4（OH）12 was cluster figure composed of sheet or prismatic particles with smooth surface.
基金financial support from Strasbourg University via the Id EX-2018(Postdoctorants)projectfinancial support by the project CALIPSOplus under the proposal number 20200271 from the EU Framework Program HORIZON 2020。
文摘The oxidation of porous Ni-yttria-stabilized zirconia(YSZ)and Ni-gadolinia-doped ceria(GDC)ceramicmetal(cermet)electrodes in H_(2)O and CO_(2)atmospheres was studied by near-ambient pressure X-ray photoelectron spectroscopy(NAP-XPS).We show that the oxidation of nickel by the two gases is not similar,as is commonly believed,but it depends on the ceramic type.Nickel is vulnerable to oxidation in H_(2)O but it resists to CO_(2)in Ni-GDC,as compared to the Ni-YSZ electrode.Inspired by this observation we conceptualize and fabricate Ni-YSZ electrodes modified by ceria nanoparticles,which show significantly higher resistance to CO_(2)oxidation as compared with conventional Ni-YSZ electrodes.The preparation of tailormade cermet electrodes with identical bulk/mechanical characteristics but very different surface properties offers a promising fabrication strategy for high-performance and durability solid oxide electrolysis cells for CO_(2)conversion.
基金This project was financially supported by the National Natural Science Foundation of China under grant No.50307009the Ministry of Science and Technology of South Korea through National Research Lab Program.
文摘A nanocomposite of nickel oxide/carbon nanotubes was prepared through a simple chemical precipitation followed by thermal annealing. The electrochemical capacitance of this electrode material was studied. When the mass fraction of CNTs (carbon nanotubes) in NiO/CNT composites increases, the electrical resistivity of nanocomposites decreases and becomes similar to that of pure CNTs when it reaches 30%. The specific surface area of composites increases with increasing CNT mass fraction and the specific capacitance reaches 160 F/g under 10 mA/g discharge current density at CNT mass fraction of 10%.
基金supported by the National Natural Science Foundation of China (Grant numbers: 61925405 and 51972102)。
文摘The emergence of inverted perovskite solar cells(PSCs) has attached great attention derived from the potential in improving stability. Charge transporting layer, especially hole transporting layer is crucial for efficient inverted PSCs. Organic materials were used as hole transporting layer previously. Recently, more and more inorganic hole transporting materials have been deployed for further improving the device stability. Nickel oxide(NiOx) as p-type metal oxide, owning high charge mobility and intrinsic stability,has been widely adopted in inverted PSCs. High performance over 20% efficiency has been achieved on NiOx base inverted PSCs. Herein, we have summarized recent progresses and strategies on the NiOx based PSCs, including the synthesis or deposition methods of NiOx, doping and surface modification of NiOx for efficient and stable PSCs. Finally, we will discuss current challenges of utilizing NiOx HTLs in PSCs and attempt to give probable solutions to make further development in efficient as well as stable NiOx based PSCs.
基金supported by the National Research Foundation of Korea (NRF) Grant funded by the Korea government (MSIP) (NRF-2018R1A4A1024691, NRF-2017M1A2A2087577, and NRF-2018R1D1A3B07042514)
文摘In this study, coral?like yolk–shell?structured NiO/C composite microspheres(denoted as CYS?NiO/C) were prepared using spray pyrolysis. The unique yolk–shell structure was characterized, and the formation mechanism of the structure was proposed. Both the phase separation of the polyvinylpyrrolidone and polystyrene(PS) colloidal solution and the decompo?sition of the size?controlled PS nanobeads in the droplet played crucial roles in the formation of the unique coral?like yolk–shell structure. The CYS?NiO/C microspheres delivered a reversible discharge capacity of 991 mAh g^(-1) after 500 cycles at the current density of 1.0 A g^(-1). The dis?charge capacity of the CYS?NiO/C microspheres after the 1000 th cycle at the current density of 2.0 A g^(-1) was 635 mAh g^(-1), and the capacity retention measured from the second cycle was 91%. The final discharge capacities of the CYS?NiO/C microspheres at the current densities of 0.5, 1.5, 3.0, 5.0, 7.0, and 10.0 A g^(-1) were 753, 648, 560, 490, 440, and 389 mAh g^(-1), respectively. The synergetic e ect of the coral?like yolk–shell structure with well?defined interconnected mesopores and highly conductive carbon resulted in the excellent Li+?ion storage properties of the CYS?NiO/C microspheres.
基金financially supported by the Scientific Research Starting Foundation of Young Teachers,Scientific Research Foundation of Ministry of Education in China(No. N110302001)
文摘The effect of nickel on the ion-selective property of the rust layers formed on the low alloy weathering steels under marine atmosphere was investigated by an alternate wet-dry accelerated corrosion test. Four types of low-alloying steels with different Ni contents were prepared for the corrosion test. The rust formed at various stages of corrosion was characterized by electrochemical impedance spectra （EIS）, electron microprobe analysis （EMPA） and scanning electron microscopy （SEM）. Afterwards, the corrosion resistance property of the rust was studied in the light of the exper- imental results. It is shown that increasing Ni content has significantly improved the corrosion resistance of the low-alloying steels under marine atmosphere. Further- more, it is noted that an evident cation-selective property emerges in the rust layers with the Ni content of the rust layers up to 1.82%. However, when the Ni content of steel the matrix is below 1.5%, it has little effect on the cation-selective property. The ratio of Ni content in between the rust layer and the steel substrate decreases with the increase of Ni content in the steel substrate and varies little as the corrosion proceeds.
基金partly funded by the European Union (European Regional Development Fund) PlasTEP|# 033| KST 770123
文摘The carbon and nickel oxide/carbon composite electrodes were prepared by plasma jet and magnetron sput-tering techniques. The investigations were performed to evaluate the influence of the Ar/C2H2 ratio on the specific capacitance values of carbon and NiO/carbon electrodes. The obtained electrodes were investigated by scanning electron microscopy, Raman scattering spectroscopy （RS）, and X-ray diffraction techniques. The surface of the carbon electrodes became less porous and more homogenous with increasing Ar/C2H2. The RS results indicated that the fraction of the sp2 carbon sites increased with increasing Ar/C2H2 ratio. The increase of the Ar/C2H2 ratio increased the capacitance values from 0.73 up to 3.8 F/g. Meanwhile, after the deposition of the nickel oxide on the carbon, the capacitance increased ten and more times and varied in the range of 7.6-86.1 F/g.
基金financially supported by the Natural Science Basic Research Plan in Shaanxi Province of China(No.2018JM2015)the Fundamental Research Funds for the Central Universities(No.3102017jc01001)the National Key Research and Development Program of China(No.2017YFC0211500)。
文摘Semiconductor metal oxides have attracted wide attention in the area of gas sensor due to that they have unique advantages in the rapid and accurate detection of harmful gases.A simple strategy is to synthesize porous NiO hollow microspheres via a simple hydrothermal method with trisodium citrate as structure guide agent is presented in this paper,and the shell of the microsphere is composed of porous and lamellar assembly units.The cavity proportion can be adjusted by changing the amount of trisodium citrate.A reasonable mechanism was proposed to explain the formation of porous NiO hollow microspheres.As a gas-sensing material,porous NiO hollow microspheres show excellent gas selectivity and rapid response recovery time for n-butyl alcohol gas.When the content of trisodium citrate was 0.10 g,the synthesized hollow sphere NiO had the highest response value(25.6)to 100×10^(-6) of n-butyl alcohol at 300℃ and the response and recovery times were only 68 and 10 s.
基金supported by the Universiti Teknologi Malaysia and Ministry of Science,Technology and Innovation,Malaysia(Vote 79252)
文摘In this research,new catalyst with high industrial impact is developed,which can catalyze the conversion of CO2 to methane through methanation reaction.A series of catalysts based on nickel oxide were prepared using wetness impregnation technique and ageing,followed by calcination at 400℃.Rh/Ni（30：70）/Al2O3 catalyst was revealed as the most potential catalyst based on the results of catalytic activity measurement monitored by Fourier Transform Infrared Spectroscopy（FTIR）and Gas Chromatography（GC）.The results showed 90.1%CO2 conversion and 70.8% yield at 400℃.
基金The authors acknowledge the National Natural Science Foun-dation of China under grant number 50082001 for financial support.
文摘The preparation of Ni oxide films and their capacitive mechanism are discussed in this paper. Nickel oxide film electrodes perform pseudocapacitance in aqueous KOH and NaOH but perform double layer capacitance in LiCIO4/PC (propylence carbonate). The effect of increasing the specific capacitance was observed when Ni oxide film electrodes are doped with Co. A specific capacitance of around 70 F/g was achieved when using Ni oxide films doped with Co as electrodes and 1 mol/L aqueous KOH or NaOH as an electrolyte.
基金was supported by the National Natural Science Foundation of China(91545113,21703050)the China Postdoctoral Science Foundation(2017M610363,2018T110584)+2 种基金Shell Global Solutions International B.V.(PT71423,PT74557)the Fok Ying Tong Education Foundation(131015)the Science&Technology Program of Ningbo(2017C50014)~~
文摘Thermal stability has long been recognized as a major limitation for the application of ligand modification in high-temperature reactions. Herein, we demonstrate polymeric phosphate as an efficient and stable ligand to tune the selectivity of propane oxidative dehydrogenation. Beneficial from the weakened affinity of propene, NiO modified with polymeric phosphate shows a selectivity 2–3 times higher than NiO towards the production of propene. The success of this regulation verifies the feasibility of ligand modification in high-temperature gas-phase reactions and shines a light on its applications in other important industrial reactions.
基金financial support from the National Natural Science Foundation of China(No.22072183)the Natural Science Foundation of Hunan Province,China(No.2022JJ30690)。
文摘The d-band state of materials is an important descriptor for activity of oxygen evolution reaction(OER).For NiO materials,there is rarely concern about tuning their d-band states to tailor the OER behaviors.Herein,NiO nanocrystals with doping small amount of La^(3+)were used to regulate d-band states for promoting OER activity.Density of states calculations based on density functional theory revealed that La^(3+)doping produced upper shift of d-band center,which would induce stronger electronic interaction between surface Ni atoms and species of oxygen evolution reaction intermediates.Further density functional theory calculation illustrated that La^(3+)doped NiO possessed reduced Gibbs free energy in adsorbing species of OER intermediate.Predicted by theoretical calculations,trace La^(3+)was introduced into crystal lattice of NiO nanoparticles.The La^(3+)doped NiO nanocrystal showed much promoted OER activity than corresponding pristine NiO product.Further electrochemical analysis revealed that La^(3+)doping into NiO increased the intrinsic activity such as improved active sites and reduced charge transfer resistance.The in-situ Raman spectra suggested that NiO phase in La^(3+)doped NiO could be better maintained than pristine NiO during the OER.This work provides an effective strategy to tune the d-band center of NiO for efficient electrocatalytic OER.
基金financially supported by (i) Suranaree University of Technology,(ii) Thailand Science Research and Innovation,and (iii) National Science,Research and Innovation Fund(project codes 90464 and 160363)。
文摘The effect of Na-excess content in the precursor on the structural and electrochemical performances of sodium nickel manganese oxide(NNMO)prepared by sol-gel and electrospinning methods is investigated in this paper.X-ray diffraction results of the prepared NNMO without adding Na-excess content indicate sodium loss,while the mixed phase of P2/O′3-type layered NNMO presented after adding Na-excess content.Compared with the sol-gel method,the secondary phase of NiO is more suppressed by using the electrospinning method,which is further confirmed by field emission scanning electron microscope images.N_(2) adsorption-desorption isotherms show no remarkably difference in specific surface areas between different preparation methods and Na-excess contents.The analysis of X-ray absorption near edge structure indicates that the oxidation states of Ni and Mn are+2 and+4,respectively.For the electrochemical properties,superior electrochemical performance is observed in the NNMO electrode with a low Na-excess content of 5wt%.The highest specific capacitance is 36.07 F·g^(-1)at0.1 A·g^(-1)in the NNMO electrode prepared by using the sol-gel method.By contrast,the NNMO electrode prepared using the electrospinning method with decreased Na-excess content shows excellent cycling stability of 100%after charge-discharge measurements for 300 cycles.Therefore,controlling the Na excess in the precursor together with the preparation method is important for improving the electrochemical performance of Na-based electrode materials in supercapacitors.
基金supported by Long Term Research Grant(LRGS)(203/PKT/6723001) from Ministry of Higher Education(MOHE)Research University Team Grant(1001/PJKIMIA/854001) from University Sains MalaysiaPostgraduate Research Grant Scheme(PRGS) from University Sains Malaysia and USM Fellowship
文摘A new type of calcium-based regenerable carbon dioxide （CO_2） sorbent, CaO-NiO, was synthesized via the sol-gel method. The as synthesized CO_2 sorbent was in the form of nanoparticles. The CO_2 sorption temperature and capacity of the sorbent were examined using thermogravi- metric analysis （TGA）. The CaO-NiO sorbent is able to capture CO_2 at a lower sorption temperature （465 ℃） than pure calcium oxide （CaO） （600 ℃）. The role of NiO in the CaO-NiO sorbent in lowering the CO_2 sorption temperature was also investigated. The sorbent was char- acterized by X-ray diffractometer （XRD）, N_2 adsorption-desorption analysis, high resolution transmission electron microscopy （HRTEM） and scanning electron microscopy （SEM）. CaO and NiO were found to coexist in the sorbent. Neither solid solution nor mixed metal oxide was formed. NiO did not react with CO_2 in the sorption process; but it worked like a catalyst to promote the CaO carbonation reaction. It is suggested that this new CaO-NiO sorbent may have a promising application as an effective CO_2 sorbent with lower energy consumption.
