To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based sim...To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.展开更多
Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout a...Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.展开更多
The topology structure of the artificial neural network is an intelligent control model,which is used for the intelligent vehicle control system and household sweeping robot.When setting the intelligent control system...The topology structure of the artificial neural network is an intelligent control model,which is used for the intelligent vehicle control system and household sweeping robot.When setting the intelligent control system,the connection point of each network is regarded as a neuron in the nervous system,and each connection point has input and output functions.Only when the input of nodes reaches a certain threshold can the output function of nodes be stimulated.Using the networking mode of the artificial neural network model,the mobile node can output in multiple directions.If the input direction of a certain path is the same as that of other nodes,it can choose to avoid and choose another path.The weighted value of each path between nodes is different,which means that the influence of the front node on the current node varies.The control method based on the artificial neural network model can be applied to vehicle control,household sweeping robots,and other fields,and a relatively optimized scheme can be obtained from the aspect of time and energy consumption.展开更多
Numerical simulation plays an important role in the dynamic analysis of multibody system.With the rapid development of computer science,the numerical solution technology has been further developed.Recently,data-driven...Numerical simulation plays an important role in the dynamic analysis of multibody system.With the rapid development of computer science,the numerical solution technology has been further developed.Recently,data-driven method has become a very popular computing method.However,due to lack of necessary mechanism information of the traditional pure data-driven methods based on neural network,its numerical accuracy cannot be guaranteed for strong nonlinear system.Therefore,this work proposes a mechanism-data hybrid-driven strategy for solving nonlinear multibody system based on physics-informed neural network to overcome the limitation of traditional data-driven methods.The strategy proposed in this paper introduces scaling coefficients to introduce the dynamic model of multibody system into neural network,ensuring that the training results of neural network conform to the mechanics principle of the system,thereby ensuring the good reliability of the data-driven method.Finally,the stability,generalization ability and numerical accuracy of the proposed method are discussed and analyzed using three typical multibody systems,and the constrained default situations can be controlled within the range of 10^(-2)-10^(-4).展开更多
Physics-informed neural networks(PINNs)have shown considerable promise for performing numerical simulations in fluid mechanics.They provide mesh-free,end-to-end approaches by embedding physical laws into their loss fu...Physics-informed neural networks(PINNs)have shown considerable promise for performing numerical simulations in fluid mechanics.They provide mesh-free,end-to-end approaches by embedding physical laws into their loss functions.However,when addressing complex flow problems,PINNs still face some challenges such as activation saturation and vanishing gradients in deep network training,leading to slow convergence and insufficient prediction accuracy.We present physics-informed neural networks incorporating lattice Boltzmann method optimized by tanh robust weight initialization(T-PINN-LBM)to address these challenges.This approach fuses the mesoscopic lattice Boltzmann model with the automatic differentiation framework of PINNs.It also implements a tanh robust weight initialization method derived from fixed point analysis.This model effectively mitigates activation and gradient decay in deep networks,improving convergence speed and data efficiency in multiscale flow simulations.We validate the effectiveness of the model on the classical arithmetic example of lid-driven cavity flow.Compared to the traditional Xavier initialized PINN and PINN-LBM,T-PINNLBM reduces the mean absolute error(MAE)by one order of magnitude at the same network depth and maintains stable convergence in deeper networks.The results demonstrate that this model can accurately capture complex flow structures without prior data,providing a new feasible pathway for data-free driven fluid simulation.展开更多
Using a modified subgradient extragradient algorithm, this paper proposed a novel approach to solving a supply chain network equilibrium model. The method extends the scope of optimisation and improves the accuracy at...Using a modified subgradient extragradient algorithm, this paper proposed a novel approach to solving a supply chain network equilibrium model. The method extends the scope of optimisation and improves the accuracy at each iteration by incorporating adaptive parameter selection and a more general subgradient projection operator. The advantages of the proposed method are highlighted by the proof of strong convergence presented in the paper. Several concrete examples are given to demonstrate the effectiveness of the algorithm, with comparisons illustrating its superior CPU running time compared to alternative techniques. The practical applicability of the algorithm is also demonstrated by applying it to a realistic supply chain network model.展开更多
Dear Editor,This letter deals with the distributed recursive set-membership filtering(DRSMF)issue for state-saturated systems under encryption-decryption mechanism.To guarantee the data security,the encryption-decrypt...Dear Editor,This letter deals with the distributed recursive set-membership filtering(DRSMF)issue for state-saturated systems under encryption-decryption mechanism.To guarantee the data security,the encryption-decryption mechanism is considered in the signal transmission process.Specifically,a novel DRSMF scheme is developed such that,for both state saturation and encryption-decryption mechanism,the filtering error(FE)is limited to the ellipsoid domain.Then,the filtering error constraint matrix(FECM)is computed and a desirable filter gain is derived by minimizing the FECM.Besides,the bound-edness evaluation of the FECM is provided.展开更多
Thymus quinquecostatus Celak.,a traditional aromatic edible plant from Lamiaceae,is widely used as food additive,food condiment,spice,and herbal teas.Polyphenol-rich fraction of T.quinquecostatus(PRF)has been proven t...Thymus quinquecostatus Celak.,a traditional aromatic edible plant from Lamiaceae,is widely used as food additive,food condiment,spice,and herbal teas.Polyphenol-rich fraction of T.quinquecostatus(PRF)has been proven to be effective protective effect for cerebral ischemia reperfusion injury(CIRI)in our previous study.In this study,we developed a novel“Gut flora-Compound-Target-Pathway”(GCTP)network based on network pharmacology coupled with gastrointestinal metabolism for screening bio-active components,key targets and gut floras through the classical technique for order preference by similarity to ideal solution(TOPSIS).This compensates for the lack of gut floras and gastrointestinal metabolism in network pharmacology.Firstly,four incubation models covering simulated gastric juice,simulated intestinal juice,gut floras of normal and transient middle cerebral artery occlusion(tMCAO)rat in vitro were applied to PRF.The 109 proto-components and 64 metabolites were elucidated by ultra-high performance liquid chromatography Q exactive orbitrap-mass spectrometry(UPLC-QE-Orbitrap-MS).Then,the key targets of matrix metalloproteinase 9(MMP9),prostaglandin-endoperoxide synthase 2(PTGS2),tyrosine-protein kinase fyn(FYN),estrogen receptor 1(ESR1),amyloid precursor protein(APP),and epidermal growth factor receptor(EGFR),and gut floras of Enterococcus avium LY1 were selected.Moreover,the selected key proto components were rosmarinic acid,daidzein,quercetin,luteolin,apigenin,methyl rosmarinate,kaempferol,luteoloside,and caffeic acid,and the key metabolites were isokaempferide,isorhamnetin,isoquercetin,and mangiferin.Binding of compounds to the key proteins was analyzed by molecular docking,and also verified though an 2,2'-azobis(2-amidinopropane)dihydrochloride(AAPH)induced oxidative stress zebrafish model and real-time quantitative polymerase chain reaction(RT-qPCR)assays.This study provides a new idea and a better understanding of PRF for its protective effects on CIRI and its underlying mechanisms.展开更多
In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results i...In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.展开更多
The adjoint method is widely used in gradient-based optimization with high-dimensional design variables.However,the cost of solving the adjoint equations in each iteration is comparable to that of solving the flow fie...The adjoint method is widely used in gradient-based optimization with high-dimensional design variables.However,the cost of solving the adjoint equations in each iteration is comparable to that of solving the flow field,resulting in expensive computational costs.To improve the efficiency of solving adjoint equations,we propose a physics-constrained graph neural networks for solving adjoint equations,named ADJ-PCGN.ADJ-PCGN establishes a mapping relationship between flow characteristics and adjoint vector based on data,serving as a replacement for the computationally expensive numerical solution of adjoint equations.A physics-based graph structure and message-passing mechanism are designed to endow its strong fitting and generalization capabilities.Taking transonic drag reduction and maximum lift-drag ratio of the airfoil as examples,results indicate that ADJ-PCGN attains a similar optimal shape as the classical direct adjoint loop method.In addition,ADJ-PCGN demonstrates strong generalization capabilities across different mesh topologies,mesh densities,and out-of-distribution conditions.It holds the potential to become a universal model for aerodynamic shape optimization involving states,geometries,and meshes.展开更多
Fractures are typically characterized by roughness that significantlyaffects the mechanical and hydraulic characteristics of reservoirs.However,hydraulic fracturing mechanisms under the influenceof fracture morphology...Fractures are typically characterized by roughness that significantlyaffects the mechanical and hydraulic characteristics of reservoirs.However,hydraulic fracturing mechanisms under the influenceof fracture morphology remain largely unexplored.Leveraging the advantages of the finite-discrete element method(FDEM)for explicitly simulating fracture propagation and the strengths of the unifiedpipe model(UPM)for efficientlymodeling dual-permeability seepage,we propose a new hydromechanical(HM)coupling approach for modeling hydraulic fracturing.Validated against benchmark examples,the proposed FDEM-UPM model is further augmented by incorporating a Fourier-based methodology for reconstructing non-planar fractures,enabling quantitative analysis of hydraulic fracturing behavior within rough discrete fracture networks(DFNs).The FDEM-UPM model demonstrates computational advantages in accurately capturing transient hydraulic seepage phenomena,while the asynchronous time-stepping schemes between hydraulic and mechanical analyses substantially enhanced computational efficiencywithout compromising computational accuracy.Our results show that fracture morphology can affect both macroscopic fracture networks and microscopic interaction types between hydraulic fractures(HFs)and natural fractures(NFs).In an isotropic stress field,the initiation azimuth,propagation direction and microcracking mechanism are significantly influencedby fracture roughness.In an anisotropic stress field,HFs invariably propagate parallel to the direction of the maximum principal stress,reducing the overall complexity of the stimulated fracture networks.Additionally,stress concentration and perturbation attributed to fracture morphology tend to be compromised as the leak-off increases,while the breakdown and propagation pressures remain insensitive to fracture morphology.These findingsprovide new insights into the hydraulic fracturing mechanisms of fractured reservoirs containing complex rough DFNs.展开更多
The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be diff...The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be different.It is of practical significance to study the key nodes identification methods corresponding to various types of transportation networks.Based on the knowledge of complex networks,the metro networks and the bus networks are selected as the objects,and the key nodes are identified by the node degree identification method,the neighbor node degree identification method,the weighted k-shell degree neighborhood identification method(KSD),the degree k-shell identification method(DKS),and the degree k-shell neighborhood identification method(DKSN).Take the network efficiency and the largest connected subgraph as the effective indicators.The results show that the KSD identification method that comprehensively considers the elements has the best recognition effect and has certain practical significance.展开更多
In complex networks,identifying influential spreader is of great significance for improving the reliability of networks and ensuring the safe and effective operation of networks.Nowadays,it is widely used in power net...In complex networks,identifying influential spreader is of great significance for improving the reliability of networks and ensuring the safe and effective operation of networks.Nowadays,it is widely used in power networks,aviation networks,computer networks,and social networks,and so on.Traditional centrality methods mainly include degree centrality,closeness centrality,betweenness centrality,eigenvector centrality,k-shell,etc.However,single centrality method is onesided and inaccurate,and sometimes many nodes have the same centrality value,namely the same ranking result,which makes it difficult to distinguish between nodes.According to several classical methods of identifying influential nodes,in this paper we propose a novel method that is more full-scaled and universally applicable.Taken into account in this method are several aspects of node’s properties,including local topological characteristics,central location of nodes,propagation characteristics,and properties of neighbor nodes.In view of the idea of the multi-attribute decision-making,we regard the basic centrality method as node’s attribute and use the entropy weight method to weigh different attributes,and obtain node’s combined centrality.Then,the combined centrality is applied to the gravity law to comprehensively identify influential nodes in networks.Finally,the classical susceptible-infected-recovered(SIR)model is used to simulate the epidemic spreading in six real-society networks.Our proposed method not only considers the four topological properties of nodes,but also emphasizes the influence of neighbor nodes from the aspect of gravity.It is proved that the new method can effectively overcome the disadvantages of single centrality method and increase the accuracy of identifying influential nodes,which is of great significance for monitoring and controlling the complex networks.展开更多
Vibration monitoring by virtual sensing methods has been well developed for linear timeinvariant structures with limited sensors.However,few methods are proposed for Time-Varying(TV)structures which are inevitable in ...Vibration monitoring by virtual sensing methods has been well developed for linear timeinvariant structures with limited sensors.However,few methods are proposed for Time-Varying(TV)structures which are inevitable in aerospace engineering.The core of vibration monitoring for TV structures is to describe the TV structural dynamic characteristics with accuracy and efficiency.This paper propose a new method using the Long Short-Term Memory(LSTM)networks for Continuously Variable Configuration Structures(CVCSs),which is an important subclass of TV structures.The configuration parameters are used to represent the time-varying dynamic characteristics by the‘‘freezing"method.The relationship between TV dynamic characteristics and vibration responses is established by LSTM,and can be generalized to estimate the responses with unknown TV processes benefiting from the time translation invariance of LSTM.A numerical example and a liquid-filled pipe experiment are used to test the performance of the proposed method.The results demonstrate that the proposed method can accurately estimate the unmeasured responses for CVCSs to reveal the actual characteristics in time-domain and modal-domain.Besides,the average one-step estimation time of responses is less than the sampling interval.Thus,the proposed method is promising to on-line estimate the important responses of TV structures.展开更多
Feedforward multi layer neural networks have very strong mapping capability that is based on the non linearity of the activation function, however, the non linearity of the activation function can cause the multiple ...Feedforward multi layer neural networks have very strong mapping capability that is based on the non linearity of the activation function, however, the non linearity of the activation function can cause the multiple local minima on the learning error surfaces, which affect the learning rate and solving optimal weights. This paper proposes a learning method linearizing non linearity of the activation function and discusses its merits and demerits theoretically.展开更多
Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solv...Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.展开更多
Heterogeneity is an inherent component of rock and may be present in different forms including mineralheterogeneity, geometrical heterogeneity, weak grain boundaries and micro-defects. Microcracks areusually observed ...Heterogeneity is an inherent component of rock and may be present in different forms including mineralheterogeneity, geometrical heterogeneity, weak grain boundaries and micro-defects. Microcracks areusually observed in crystalline rocks in two forms： natural and stress-induced; the amount of stressinducedmicrocracking increases with depth and in-situ stress. Laboratory results indicate that thephysical properties of rocks such as strength, deformability, P-wave velocity and permeability areinfluenced by increase in microcrack intensity. In this study, the finite-discrete element method （FDEM）is used to model microcrack heterogeneity by introducing into a model sample sets of microcracks usingthe proposed micro discrete fracture network （mDFN） approach. The characteristics of the microcracksrequired to create mDFN models are obtained through image analyses of thin sections of Lac du Bonnetgranite adopted from published literature. A suite of two-dimensional laboratory tests including uniaxial,triaxial compression and Brazilian tests is simulated and the results are compared with laboratory data.The FDEM-mDFN models indicate that micro-heterogeneity has a profound influence on both the mechanicalbehavior and resultant fracture pattern. An increase in the microcrack intensity leads to areduction in the strength of the sample and changes the character of the rock strength envelope. Spallingand axial splitting dominate the failure mode at low confinement while shear failure is the dominantfailure mode at high confinement. Numerical results from simulated compression tests show thatmicrocracking reduces the cohesive component of strength alone, and the frictional strength componentremains unaffected. Results from simulated Brazilian tests show that the tensile strength is influenced bythe presence of microcracks, with a reduction in tensile strength as microcrack intensity increases. Theimportance of microcrack heterogeneity in reproducing a bi-linear or S-shape failure envelope and itseffects on the mechanisms leading to spalling damage near an underground opening are also discussed.展开更多
The core of network security is the risk assessment. In this letter,a risk assessment method is introduced to estimate the wireless network security. The method,which combines Analytic Hier-archy Process (AHP) method ...The core of network security is the risk assessment. In this letter,a risk assessment method is introduced to estimate the wireless network security. The method,which combines Analytic Hier-archy Process (AHP) method and fuzzy logical method,is applied to the risk assessment. Fuzzy logical method is applied to judge the important degree of each factor in the aspects of the probability,the influence and the uncontrollability,not to directly judge the important degree itself. The risk as-sessment is carved up 3 layers applying AHP method,the sort weight of the third layer is calculated by fuzzy logical method. Finally,the important degree is calculated by AHP method. By comparing the important degree of each factor,the risk which can be controlled by taking measures is known. The study of the case shows that the method can be easily used to the risk assessment of the wireless network security and its results conform to the actual situation.展开更多
The trajectory tracking control problem is addressed for autonomous underwater vehicle(AUV) in marine environ?ment, with presence of the influence of the uncertain factors including ocean current disturbance, dynamic ...The trajectory tracking control problem is addressed for autonomous underwater vehicle(AUV) in marine environ?ment, with presence of the influence of the uncertain factors including ocean current disturbance, dynamic modeling uncertainty, and thrust model errors. To improve the trajectory tracking accuracy of AUV, an adaptive backstepping terminal sliding mode control based on recurrent neural networks(RNN) is proposed. Firstly, considering the inaccu?rate of thrust model of thruster, a Taylor’s polynomial is used to obtain the thrust model errors. And then, the dynamic modeling uncertainty and thrust model errors are combined into the system model uncertainty(SMU) of AUV; through the RNN, the SMU and ocean current disturbance are classified, approximated online. Finally, the weights of RNN and other control parameters are adjusted online based on the backstepping terminal sliding mode controller. In addition, a chattering?reduction method is proposed based on sigmoid function. In chattering?reduction method, the sigmoid function is used to realize the continuity of the sliding mode switching function, and the sliding mode switching gain is adjusted online based on the exponential form of the sliding mode function. Based on the Lyapu?nov theory and Barbalat’s lemma, it is theoretically proved that the AUV trajectory tracking error can quickly converge to zero in the finite time. This research proposes a trajectory tracking control method of AUV, which can e ectively achieve high?precision trajectory tracking control of AUV under the influence of the uncertain factors. The feasibility and e ectiveness of the proposed method is demonstrated with trajectory tracking simulations and pool?experi?ments of AUV.展开更多
The flash points of organic compounds were estimated using a hybrid method that includes a simple group contribution method (GCM) implemented in an artificial neural network (ANN) with particle swarm optimization (PSO...The flash points of organic compounds were estimated using a hybrid method that includes a simple group contribution method (GCM) implemented in an artificial neural network (ANN) with particle swarm optimization (PSO). Different topologies of a multilayer neural network were studied and the optimum architecture was determined. Property data of 350 compounds were used for training the network. To discriminate different substances the molecular structures defined by the concept of the classical group contribution method were given as input variables. The capabilities of the network were tested with 155 substances not considered in the training step. The study shows that the proposed GCM+ANN+PSO method represent an excellent alternative for the estimation of flash points of organic compounds with acceptable accuracy (AARD = 1.8%; AAE = 6.2 K).展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52271317 and 52071149)the Fundamental Research Funds for the Central Universities(HUST:2019kfy XJJS007)。
文摘To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.
基金supported by National Natural Science Foundation of China(Grant Nos.52074312 and 52211530097)CNPC Science and Technology Innovation Foundation(Grant No.2021DQ02-0505).
文摘Wellbore breakout is one of the critical issues in drilling due to the fact that the related problems result in additional costs and impact the drilling scheme severely.However,the majority of such wellbore breakout analyses were based on continuum mechanics.In addition to failure in intact rocks,wellbore breakouts can also be initiated along natural discontinuities,e.g.weak planes and fractures.Furthermore,the conventional models in wellbore breakouts with uniform distribution fractures could not reflect the real drilling situation.This paper presents a fully coupled hydro-mechanical model of the SB-X well in the Tarim Basin,China for evaluating wellbore breakouts in heavily fractured rocks under anisotropic stress states using the distinct element method(DEM)and the discrete fracture network(DFN).The developed model was validated against caliper log measurement,and its stability study was carried out by stress and displacement analyses.A parametric study was performed to investigate the effects of the characteristics of fracture distribution(orientation and length)on borehole stability by sensitivity studies.Simulation results demonstrate that the increase of the standard deviation of orientation when the fracture direction aligns parallel or perpendicular to the principal stress direction aggravates borehole instability.Moreover,an elevation in the average fracture length causes the borehole failure to change from the direction of the minimum in-situ horizontal principal stress(i.e.the direction of wellbore breakouts)towards alternative directions,ultimately leading to the whole wellbore failure.These findings provide theoretical insights for predicting wellbore breakouts in heavily fractured rocks.
文摘The topology structure of the artificial neural network is an intelligent control model,which is used for the intelligent vehicle control system and household sweeping robot.When setting the intelligent control system,the connection point of each network is regarded as a neuron in the nervous system,and each connection point has input and output functions.Only when the input of nodes reaches a certain threshold can the output function of nodes be stimulated.Using the networking mode of the artificial neural network model,the mobile node can output in multiple directions.If the input direction of a certain path is the same as that of other nodes,it can choose to avoid and choose another path.The weighted value of each path between nodes is different,which means that the influence of the front node on the current node varies.The control method based on the artificial neural network model can be applied to vehicle control,household sweeping robots,and other fields,and a relatively optimized scheme can be obtained from the aspect of time and energy consumption.
基金supported by the National Natural Science Foundation of China(Grant No.U2241263)the fellowship of China Postdoctoral Science Foundation(Grant No.2024M750310).
文摘Numerical simulation plays an important role in the dynamic analysis of multibody system.With the rapid development of computer science,the numerical solution technology has been further developed.Recently,data-driven method has become a very popular computing method.However,due to lack of necessary mechanism information of the traditional pure data-driven methods based on neural network,its numerical accuracy cannot be guaranteed for strong nonlinear system.Therefore,this work proposes a mechanism-data hybrid-driven strategy for solving nonlinear multibody system based on physics-informed neural network to overcome the limitation of traditional data-driven methods.The strategy proposed in this paper introduces scaling coefficients to introduce the dynamic model of multibody system into neural network,ensuring that the training results of neural network conform to the mechanics principle of the system,thereby ensuring the good reliability of the data-driven method.Finally,the stability,generalization ability and numerical accuracy of the proposed method are discussed and analyzed using three typical multibody systems,and the constrained default situations can be controlled within the range of 10^(-2)-10^(-4).
基金supported by the National Natural Science Foundation of China(Grant Nos.12474453,12174085,and 12404530).
文摘Physics-informed neural networks(PINNs)have shown considerable promise for performing numerical simulations in fluid mechanics.They provide mesh-free,end-to-end approaches by embedding physical laws into their loss functions.However,when addressing complex flow problems,PINNs still face some challenges such as activation saturation and vanishing gradients in deep network training,leading to slow convergence and insufficient prediction accuracy.We present physics-informed neural networks incorporating lattice Boltzmann method optimized by tanh robust weight initialization(T-PINN-LBM)to address these challenges.This approach fuses the mesoscopic lattice Boltzmann model with the automatic differentiation framework of PINNs.It also implements a tanh robust weight initialization method derived from fixed point analysis.This model effectively mitigates activation and gradient decay in deep networks,improving convergence speed and data efficiency in multiscale flow simulations.We validate the effectiveness of the model on the classical arithmetic example of lid-driven cavity flow.Compared to the traditional Xavier initialized PINN and PINN-LBM,T-PINNLBM reduces the mean absolute error(MAE)by one order of magnitude at the same network depth and maintains stable convergence in deeper networks.The results demonstrate that this model can accurately capture complex flow structures without prior data,providing a new feasible pathway for data-free driven fluid simulation.
文摘Using a modified subgradient extragradient algorithm, this paper proposed a novel approach to solving a supply chain network equilibrium model. The method extends the scope of optimisation and improves the accuracy at each iteration by incorporating adaptive parameter selection and a more general subgradient projection operator. The advantages of the proposed method are highlighted by the proof of strong convergence presented in the paper. Several concrete examples are given to demonstrate the effectiveness of the algorithm, with comparisons illustrating its superior CPU running time compared to alternative techniques. The practical applicability of the algorithm is also demonstrated by applying it to a realistic supply chain network model.
基金supported by the National Natural Science Foundation of China(12471416,12171124,12301567)the Heilongjiang Provincial Natural Science Foundation of China(PL2024F015)+2 种基金the Postdoctoral Science Foundation of Heilongjiang Province of China(LBH-Z22199)the Fundamental Research Foun-dation for Universities of Heilongjiang Province of China(2022-KYYWF-0141)the Alexander von Humboldt Foundation of Germany.
文摘Dear Editor,This letter deals with the distributed recursive set-membership filtering(DRSMF)issue for state-saturated systems under encryption-decryption mechanism.To guarantee the data security,the encryption-decryption mechanism is considered in the signal transmission process.Specifically,a novel DRSMF scheme is developed such that,for both state saturation and encryption-decryption mechanism,the filtering error(FE)is limited to the ellipsoid domain.Then,the filtering error constraint matrix(FECM)is computed and a desirable filter gain is derived by minimizing the FECM.Besides,the bound-edness evaluation of the FECM is provided.
基金supported by the Key Research and Development Project of Ningxia Hui Autonomous Region(2020BFG03007).
文摘Thymus quinquecostatus Celak.,a traditional aromatic edible plant from Lamiaceae,is widely used as food additive,food condiment,spice,and herbal teas.Polyphenol-rich fraction of T.quinquecostatus(PRF)has been proven to be effective protective effect for cerebral ischemia reperfusion injury(CIRI)in our previous study.In this study,we developed a novel“Gut flora-Compound-Target-Pathway”(GCTP)network based on network pharmacology coupled with gastrointestinal metabolism for screening bio-active components,key targets and gut floras through the classical technique for order preference by similarity to ideal solution(TOPSIS).This compensates for the lack of gut floras and gastrointestinal metabolism in network pharmacology.Firstly,four incubation models covering simulated gastric juice,simulated intestinal juice,gut floras of normal and transient middle cerebral artery occlusion(tMCAO)rat in vitro were applied to PRF.The 109 proto-components and 64 metabolites were elucidated by ultra-high performance liquid chromatography Q exactive orbitrap-mass spectrometry(UPLC-QE-Orbitrap-MS).Then,the key targets of matrix metalloproteinase 9(MMP9),prostaglandin-endoperoxide synthase 2(PTGS2),tyrosine-protein kinase fyn(FYN),estrogen receptor 1(ESR1),amyloid precursor protein(APP),and epidermal growth factor receptor(EGFR),and gut floras of Enterococcus avium LY1 were selected.Moreover,the selected key proto components were rosmarinic acid,daidzein,quercetin,luteolin,apigenin,methyl rosmarinate,kaempferol,luteoloside,and caffeic acid,and the key metabolites were isokaempferide,isorhamnetin,isoquercetin,and mangiferin.Binding of compounds to the key proteins was analyzed by molecular docking,and also verified though an 2,2'-azobis(2-amidinopropane)dihydrochloride(AAPH)induced oxidative stress zebrafish model and real-time quantitative polymerase chain reaction(RT-qPCR)assays.This study provides a new idea and a better understanding of PRF for its protective effects on CIRI and its underlying mechanisms.
文摘In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.
基金supported by the National Natural Science Foundation of China(Grant No.12272316).
文摘The adjoint method is widely used in gradient-based optimization with high-dimensional design variables.However,the cost of solving the adjoint equations in each iteration is comparable to that of solving the flow field,resulting in expensive computational costs.To improve the efficiency of solving adjoint equations,we propose a physics-constrained graph neural networks for solving adjoint equations,named ADJ-PCGN.ADJ-PCGN establishes a mapping relationship between flow characteristics and adjoint vector based on data,serving as a replacement for the computationally expensive numerical solution of adjoint equations.A physics-based graph structure and message-passing mechanism are designed to endow its strong fitting and generalization capabilities.Taking transonic drag reduction and maximum lift-drag ratio of the airfoil as examples,results indicate that ADJ-PCGN attains a similar optimal shape as the classical direct adjoint loop method.In addition,ADJ-PCGN demonstrates strong generalization capabilities across different mesh topologies,mesh densities,and out-of-distribution conditions.It holds the potential to become a universal model for aerodynamic shape optimization involving states,geometries,and meshes.
基金supported by the National Natural Science Foundation of China(Grant Nos.52574103 and 42277150).
文摘Fractures are typically characterized by roughness that significantlyaffects the mechanical and hydraulic characteristics of reservoirs.However,hydraulic fracturing mechanisms under the influenceof fracture morphology remain largely unexplored.Leveraging the advantages of the finite-discrete element method(FDEM)for explicitly simulating fracture propagation and the strengths of the unifiedpipe model(UPM)for efficientlymodeling dual-permeability seepage,we propose a new hydromechanical(HM)coupling approach for modeling hydraulic fracturing.Validated against benchmark examples,the proposed FDEM-UPM model is further augmented by incorporating a Fourier-based methodology for reconstructing non-planar fractures,enabling quantitative analysis of hydraulic fracturing behavior within rough discrete fracture networks(DFNs).The FDEM-UPM model demonstrates computational advantages in accurately capturing transient hydraulic seepage phenomena,while the asynchronous time-stepping schemes between hydraulic and mechanical analyses substantially enhanced computational efficiencywithout compromising computational accuracy.Our results show that fracture morphology can affect both macroscopic fracture networks and microscopic interaction types between hydraulic fractures(HFs)and natural fractures(NFs).In an isotropic stress field,the initiation azimuth,propagation direction and microcracking mechanism are significantly influencedby fracture roughness.In an anisotropic stress field,HFs invariably propagate parallel to the direction of the maximum principal stress,reducing the overall complexity of the stimulated fracture networks.Additionally,stress concentration and perturbation attributed to fracture morphology tend to be compromised as the leak-off increases,while the breakdown and propagation pressures remain insensitive to fracture morphology.These findingsprovide new insights into the hydraulic fracturing mechanisms of fractured reservoirs containing complex rough DFNs.
基金supported by the National Natural Science Foundation of China(Grant No.61961019)the Youth Key Project of the Natural Science Foundation of Jiangxi Province of China(Grant No.20202ACBL212003).
文摘The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be different.It is of practical significance to study the key nodes identification methods corresponding to various types of transportation networks.Based on the knowledge of complex networks,the metro networks and the bus networks are selected as the objects,and the key nodes are identified by the node degree identification method,the neighbor node degree identification method,the weighted k-shell degree neighborhood identification method(KSD),the degree k-shell identification method(DKS),and the degree k-shell neighborhood identification method(DKSN).Take the network efficiency and the largest connected subgraph as the effective indicators.The results show that the KSD identification method that comprehensively considers the elements has the best recognition effect and has certain practical significance.
基金Project support by the National Key Research and Development Program of China(Grant No.2018YFF0301000)the National Natural Science Foundation of China(Grant Nos.71673161 and 71790613)。
文摘In complex networks,identifying influential spreader is of great significance for improving the reliability of networks and ensuring the safe and effective operation of networks.Nowadays,it is widely used in power networks,aviation networks,computer networks,and social networks,and so on.Traditional centrality methods mainly include degree centrality,closeness centrality,betweenness centrality,eigenvector centrality,k-shell,etc.However,single centrality method is onesided and inaccurate,and sometimes many nodes have the same centrality value,namely the same ranking result,which makes it difficult to distinguish between nodes.According to several classical methods of identifying influential nodes,in this paper we propose a novel method that is more full-scaled and universally applicable.Taken into account in this method are several aspects of node’s properties,including local topological characteristics,central location of nodes,propagation characteristics,and properties of neighbor nodes.In view of the idea of the multi-attribute decision-making,we regard the basic centrality method as node’s attribute and use the entropy weight method to weigh different attributes,and obtain node’s combined centrality.Then,the combined centrality is applied to the gravity law to comprehensively identify influential nodes in networks.Finally,the classical susceptible-infected-recovered(SIR)model is used to simulate the epidemic spreading in six real-society networks.Our proposed method not only considers the four topological properties of nodes,but also emphasizes the influence of neighbor nodes from the aspect of gravity.It is proved that the new method can effectively overcome the disadvantages of single centrality method and increase the accuracy of identifying influential nodes,which is of great significance for monitoring and controlling the complex networks.
文摘Vibration monitoring by virtual sensing methods has been well developed for linear timeinvariant structures with limited sensors.However,few methods are proposed for Time-Varying(TV)structures which are inevitable in aerospace engineering.The core of vibration monitoring for TV structures is to describe the TV structural dynamic characteristics with accuracy and efficiency.This paper propose a new method using the Long Short-Term Memory(LSTM)networks for Continuously Variable Configuration Structures(CVCSs),which is an important subclass of TV structures.The configuration parameters are used to represent the time-varying dynamic characteristics by the‘‘freezing"method.The relationship between TV dynamic characteristics and vibration responses is established by LSTM,and can be generalized to estimate the responses with unknown TV processes benefiting from the time translation invariance of LSTM.A numerical example and a liquid-filled pipe experiment are used to test the performance of the proposed method.The results demonstrate that the proposed method can accurately estimate the unmeasured responses for CVCSs to reveal the actual characteristics in time-domain and modal-domain.Besides,the average one-step estimation time of responses is less than the sampling interval.Thus,the proposed method is promising to on-line estimate the important responses of TV structures.
文摘Feedforward multi layer neural networks have very strong mapping capability that is based on the non linearity of the activation function, however, the non linearity of the activation function can cause the multiple local minima on the learning error surfaces, which affect the learning rate and solving optimal weights. This paper proposes a learning method linearizing non linearity of the activation function and discusses its merits and demerits theoretically.
基金Supported by National "Twelfth Five-Year" Plan for Science&Technology Support of China(Grant No.2011BAK06B05)National High-tech Research and Development Program of China(863 Program,Grant No.2013AA040203)Shanxi Scholarship Council of China(Grant No.2015-088)
文摘Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.
文摘Heterogeneity is an inherent component of rock and may be present in different forms including mineralheterogeneity, geometrical heterogeneity, weak grain boundaries and micro-defects. Microcracks areusually observed in crystalline rocks in two forms： natural and stress-induced; the amount of stressinducedmicrocracking increases with depth and in-situ stress. Laboratory results indicate that thephysical properties of rocks such as strength, deformability, P-wave velocity and permeability areinfluenced by increase in microcrack intensity. In this study, the finite-discrete element method （FDEM）is used to model microcrack heterogeneity by introducing into a model sample sets of microcracks usingthe proposed micro discrete fracture network （mDFN） approach. The characteristics of the microcracksrequired to create mDFN models are obtained through image analyses of thin sections of Lac du Bonnetgranite adopted from published literature. A suite of two-dimensional laboratory tests including uniaxial,triaxial compression and Brazilian tests is simulated and the results are compared with laboratory data.The FDEM-mDFN models indicate that micro-heterogeneity has a profound influence on both the mechanicalbehavior and resultant fracture pattern. An increase in the microcrack intensity leads to areduction in the strength of the sample and changes the character of the rock strength envelope. Spallingand axial splitting dominate the failure mode at low confinement while shear failure is the dominantfailure mode at high confinement. Numerical results from simulated compression tests show thatmicrocracking reduces the cohesive component of strength alone, and the frictional strength componentremains unaffected. Results from simulated Brazilian tests show that the tensile strength is influenced bythe presence of microcracks, with a reduction in tensile strength as microcrack intensity increases. Theimportance of microcrack heterogeneity in reproducing a bi-linear or S-shape failure envelope and itseffects on the mechanisms leading to spalling damage near an underground opening are also discussed.
基金the National Natural Science Foundation of China (No.60573036).
文摘The core of network security is the risk assessment. In this letter,a risk assessment method is introduced to estimate the wireless network security. The method,which combines Analytic Hier-archy Process (AHP) method and fuzzy logical method,is applied to the risk assessment. Fuzzy logical method is applied to judge the important degree of each factor in the aspects of the probability,the influence and the uncontrollability,not to directly judge the important degree itself. The risk as-sessment is carved up 3 layers applying AHP method,the sort weight of the third layer is calculated by fuzzy logical method. Finally,the important degree is calculated by AHP method. By comparing the important degree of each factor,the risk which can be controlled by taking measures is known. The study of the case shows that the method can be easily used to the risk assessment of the wireless network security and its results conform to the actual situation.
基金Basic Research Program of Ministry of Industry and Information Technology of China(Grant No.B2420133003)National Natural Science Foundation of China(Grant Nos.51779060,51679054)
文摘The trajectory tracking control problem is addressed for autonomous underwater vehicle(AUV) in marine environ?ment, with presence of the influence of the uncertain factors including ocean current disturbance, dynamic modeling uncertainty, and thrust model errors. To improve the trajectory tracking accuracy of AUV, an adaptive backstepping terminal sliding mode control based on recurrent neural networks(RNN) is proposed. Firstly, considering the inaccu?rate of thrust model of thruster, a Taylor’s polynomial is used to obtain the thrust model errors. And then, the dynamic modeling uncertainty and thrust model errors are combined into the system model uncertainty(SMU) of AUV; through the RNN, the SMU and ocean current disturbance are classified, approximated online. Finally, the weights of RNN and other control parameters are adjusted online based on the backstepping terminal sliding mode controller. In addition, a chattering?reduction method is proposed based on sigmoid function. In chattering?reduction method, the sigmoid function is used to realize the continuity of the sliding mode switching function, and the sliding mode switching gain is adjusted online based on the exponential form of the sliding mode function. Based on the Lyapu?nov theory and Barbalat’s lemma, it is theoretically proved that the AUV trajectory tracking error can quickly converge to zero in the finite time. This research proposes a trajectory tracking control method of AUV, which can e ectively achieve high?precision trajectory tracking control of AUV under the influence of the uncertain factors. The feasibility and e ectiveness of the proposed method is demonstrated with trajectory tracking simulations and pool?experi?ments of AUV.
文摘The flash points of organic compounds were estimated using a hybrid method that includes a simple group contribution method (GCM) implemented in an artificial neural network (ANN) with particle swarm optimization (PSO). Different topologies of a multilayer neural network were studied and the optimum architecture was determined. Property data of 350 compounds were used for training the network. To discriminate different substances the molecular structures defined by the concept of the classical group contribution method were given as input variables. The capabilities of the network were tested with 155 substances not considered in the training step. The study shows that the proposed GCM+ANN+PSO method represent an excellent alternative for the estimation of flash points of organic compounds with acceptable accuracy (AARD = 1.8%; AAE = 6.2 K).
