In this study,the workability of cement-based grouts containing n-TiO 2 nanoparticles and fly ash has been investigated experimentally.Several characteristic quantities(including,but not limited to,the marsh cone flow...In this study,the workability of cement-based grouts containing n-TiO 2 nanoparticles and fly ash has been investigated experimentally.Several characteristic quantities(including,but not limited to,the marsh cone flow time,the mini slump spreading diameter and the plate cohesion meter value)have been measured for different percentages of these additives.The use of fly ash as a mineral additive has been found to result in improvements in terms of workability behavior as expected.Moreover,if nano titanium oxide is also used,an improvement can be obtained regarding the bleeding values for the cement-based grout mixes.Using such experimental data,a multi-layer perceptron artificial neural network model has been developed(5 neurons in the hidden layer of the network model have been developed using a total of 42 experimental data).70%of the data employed in this model have been used for training,15%for validation and 15%for the test phase.The results demonstrate that the artificial neural network model can predict Marsh cone flow time,mini slump spreading diameter and plate cohesion meter values with an average error of 0.15%.展开更多
A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diamin...A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diaminodiphenyl sulfone （DDS） and terephthaloyl chloride （TPC） in the common solvent N, N-Dimethyl- -acetamide （DMAc）. Nano filler is a certain nano titanium oxide modified by silicon oxide （TMS）, which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy （AFM）, thermal gravimetric Analysis （TGA） and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.展开更多
<span style="font-family:Verdana;">The use of wood has been considered for a long time and to this day, it has a special place in human life. Modification of wood and lignocellulosic materials is done ...<span style="font-family:Verdana;">The use of wood has been considered for a long time and to this day, it has a special place in human life. Modification of wood and lignocellulosic materials is done by various methods, including modification of physical, mechanical, chemical and thermal, that as a new technology, it leads to the improvement of their undesirable features. Among these methods, heat correction is a useful method to improve dimensional stability and leads to increased resistance to water absorption and decay. The main purpose of this study is to investigate the titanium Nano oxide and heat treatment on the physical properties of hornbeam species. Samples were saturated with titanium Nano oxide solution at a concentration of 5000 ppm and pressurized 7 times in a pressure tank. The samples were divided into three groups: control, heat and Nano thermal treatment. Heat and saturated samples with titanium Nano oxide were heat treated at three temperature levels of 150</span><span style="font-family:""><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;">, 175</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> and 200</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> for 4 and 6 hours. All three groups underwent physical tests. Heat and Nano thermal oxide treatments led to reduced water absorption and thickness swelling. Comparison between heat and Nano thermal treatment showed a further decrease in water absorption and thickness swelling in Nano thermal samples.展开更多
基金funded by The Scientific and Technological Research Council of Turkey-TUBITAK[Grant No.219M522].
文摘In this study,the workability of cement-based grouts containing n-TiO 2 nanoparticles and fly ash has been investigated experimentally.Several characteristic quantities(including,but not limited to,the marsh cone flow time,the mini slump spreading diameter and the plate cohesion meter value)have been measured for different percentages of these additives.The use of fly ash as a mineral additive has been found to result in improvements in terms of workability behavior as expected.Moreover,if nano titanium oxide is also used,an improvement can be obtained regarding the bleeding values for the cement-based grout mixes.Using such experimental data,a multi-layer perceptron artificial neural network model has been developed(5 neurons in the hidden layer of the network model have been developed using a total of 42 experimental data).70%of the data employed in this model have been used for training,15%for validation and 15%for the test phase.The results demonstrate that the artificial neural network model can predict Marsh cone flow time,mini slump spreading diameter and plate cohesion meter values with an average error of 0.15%.
文摘A kind of new nano composite with ultraviolet （UV） ray resistance and high temperature stability was prepared by in-situ polymerization in low temperature. Polysulfonamide （PSA） was synthesized with 4, 4＇-diaminodiphenyl sulfone （DDS） and terephthaloyl chloride （TPC） in the common solvent N, N-Dimethyl- -acetamide （DMAc）. Nano filler is a certain nano titanium oxide modified by silicon oxide （TMS）, which plays the role of UV resistance additives. Properties of the novel composite materials were characterized by Atomic Force microscopy （AFM）, thermal gravimetric Analysis （TGA） and Ultraviolet Spectroscopy. AFM had showed the sizes and distributions of TMS particles in the nanocomposite. Ultraviolet Spectroscopy for the nanocomposites showed a large absorption in UV band. TGA showed the decomposition temperature was increased over ten degrees with 0.5% wt TMS for this nanocomposite compared with pure PSA.
文摘<span style="font-family:Verdana;">The use of wood has been considered for a long time and to this day, it has a special place in human life. Modification of wood and lignocellulosic materials is done by various methods, including modification of physical, mechanical, chemical and thermal, that as a new technology, it leads to the improvement of their undesirable features. Among these methods, heat correction is a useful method to improve dimensional stability and leads to increased resistance to water absorption and decay. The main purpose of this study is to investigate the titanium Nano oxide and heat treatment on the physical properties of hornbeam species. Samples were saturated with titanium Nano oxide solution at a concentration of 5000 ppm and pressurized 7 times in a pressure tank. The samples were divided into three groups: control, heat and Nano thermal treatment. Heat and saturated samples with titanium Nano oxide were heat treated at three temperature levels of 150</span><span style="font-family:""><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;">, 175</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> and 200</span><span style="font-family:Verdana;">℃</span><span style="font-family:Verdana;"> for 4 and 6 hours. All three groups underwent physical tests. Heat and Nano thermal oxide treatments led to reduced water absorption and thickness swelling. Comparison between heat and Nano thermal treatment showed a further decrease in water absorption and thickness swelling in Nano thermal samples.
