Identity-based key agreement protocol affords a natural way to combine the participant＇s identity with its public key. However, most of them just consider the key agreement in a single private key generator （PKG） e...Identity-based key agreement protocol affords a natural way to combine the participant＇s identity with its public key. However, most of them just consider the key agreement in a single private key generator （PKG） environment. In addition, the existing key agreement protocols have a great computing overhead for mobile computing which is more and more popular today. This paper proposes a new identity based key agreement protocol. With the help of mathematical tools, we make our protocol applied in multiple PKG environment. It also satisfies all the security properties which is set for key agreement protocol. Moreover, some of its time-consuming operations can be delivered to untrusted public computation resources, so its computing complexity can be greatly reduced.展开更多
Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark...Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark cannot be seen. The use of multiple marks can solve this problem. However, the extra process to design and identify different marks will significantly increase system complexity. In this paper, a novel vision-based locating method is proposed by using marks with feature points arranged in a radial shape. The feature points of the marks consist of inner points and outer points. The positions of the inner points are the same in all marks, while the positions of the outer points are different in different marks. Unlike traditional camera locating methods （the PnP methods）, the proposed method can calculate the camera location and the positions of the outer points simultaneously. Then the calculation results of the positions of the outer points are used to identify the mark. This method can make navigation with multiple marks more efficient. Simulations and real world experiments are carried out, and their results show that the proposed method is fast, accurate and robust to noise.展开更多
Water-related hazards, such as river floods, flash floods and droughts, are becoming more frequent in the Upper Chao Phraya River Basin, Thailand, due to climate change and urbanization, causing significant societal, ...Water-related hazards, such as river floods, flash floods and droughts, are becoming more frequent in the Upper Chao Phraya River Basin, Thailand, due to climate change and urbanization, causing significant societal, economic, and environmental damage. This study supports decision-making for nature-based solutions (NBS) to address mitigate these hazards. Using multi-criteria decision analysis, simulation modeling, and spatial analysis, the study identified precipitation and river discharges as key hazard drivers. Mapping hazard severity at various scales, the findings suggest that expanding green areas and water storage can enhance water management and reduce hazard impacts. This research offers critical insights for NBS adoption in water-related risk reduction.展开更多
The upper waveguide （UWG） has direct influences on the optical and electrical characteristics of the violet laser diode （LD） by changing the optical field distribution or barrier of the electron blocking layer （...The upper waveguide （UWG） has direct influences on the optical and electrical characteristics of the violet laser diode （LD） by changing the optical field distribution or barrier of the electron blocking layer （EBL）. In this study, a series of InGaN-based violet LDs with different UWGs are investigated systematically with LASTIP software. It is found that the output light power （OLP） under an injecting current of 120 mA or the threshold current （Ith） is deteriorated when the UWG is u-In0.02Ga0.98N/GaN or u-In0.02Ga0.98N/AlxGa1-xN （0 ≤ x ≤ 0.1）, which should be attributed to small optical confinement factor （OCF） or severe electron leakage. Therefore, a new violet LD structure with u-In0.02Ga0.98N/GaN/Al0.05Ga0.95N multiple layer UWG is proposed to reduce the optical loss and increase the barrier of EBL. Finally, the output light power under an injecting current of 120 mA is improved to 176.4 mW.展开更多
The key challenge of the extended target probability hypothesis density (ET-PHD) filter is to reduce the computational complexity by using a subset to approximate the full set of partitions. In this paper, the influen...The key challenge of the extended target probability hypothesis density (ET-PHD) filter is to reduce the computational complexity by using a subset to approximate the full set of partitions. In this paper, the influence for the tracking results of different partitions is analyzed, and the form of the most informative partition is obtained. Then, a fast density peak-based clustering (FDPC) partitioning algorithm is applied to the measurement set partitioning. Since only one partition of the measurement set is used, the ET-PHD filter based on FDPC partitioning has lower computational complexity than the other ET-PHD filters. As FDPC partitioning is able to remove the spatially close clutter-generated measurements, the ET-PHD filter based on FDPC partitioning has good tracking performance in the scenario with more clutter-generated measurements. The simulation results show that the proposed algorithm can get the most informative partition and obviously reduce computational burden without losing tracking performance. As the number of clutter-generated measurements increased, the ET-PHD filter based on FDPC partitioning has better tracking performance than other ET-PHD filters. The FDPC algorithm will play an important role in the engineering realization of the multiple extended target tracking filter.展开更多
After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing RE and multiple alloying was investigated. The results show that after heat preservation at 560 ℃ and ...After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing RE and multiple alloying was investigated. The results show that after heat preservation at 560 ℃ and tempering for 4 h the hardness value of Fe-base hardfacing layer containing RE and multiple alloying can reach HRC57; By repeatedly heating circle 700 ℃17 ℃ for 150 times, the hardness value of Fe-base hardfacing layer can reach HRC43, tempering stability is higher and causes the secondary hardening phenomenon. Reasons for higher tempering stability of Fe-base hardfacing layer were analyzed by means of metallographic, XRD, TEM and EDS.展开更多
Agent based simulation has successfully been applied to model complex organizational behavior and to improve or optimize aspects of organizational performance. Agents, with intelligence supported through the applicati...Agent based simulation has successfully been applied to model complex organizational behavior and to improve or optimize aspects of organizational performance. Agents, with intelligence supported through the application of a genetic algorithm are proposed as a means of optimizing the performance of the system being modeled. Local decisions made by agents and other system variables are placed in the genetic encoding. This allows local agents to positively impact high level system performance. A simple, but non trivial, peg game is utilized to introduce the concept. A multiple objective bin packing problem is then solved to demonstrate the potential of the approach in meeting a number of high level goals. The methodology allows not only for a systems level optimization, but also provides data which can be analyzed to determine what constitutes effective agent behavior.展开更多
Based on protein-DNA complex crystal structural data in up-to-date Nucleic Acid Database,the related parameters of DNA Kinetic Structure were investigated by Monte-Carlo Multiple Integrals on the base of modified DNA ...Based on protein-DNA complex crystal structural data in up-to-date Nucleic Acid Database,the related parameters of DNA Kinetic Structure were investigated by Monte-Carlo Multiple Integrals on the base of modified DNA structure statistical mechanical model,and time complexity and precision were analyzed on the calculated results.展开更多
BACKGROUND: Convalescence is an important stage of stroke treatment. A lot of patients have somatic and mental disorders at various degrees. The primary standard can only reflect partial conditions of somatic disorder...BACKGROUND: Convalescence is an important stage of stroke treatment. A lot of patients have somatic and mental disorders at various degrees. The primary standard can only reflect partial conditions of somatic disorder; in addition, multiple dimensions of patients at the phase of stroke convalescence are further observed by using a lot of standards, such as signs and symptoms of traditional Chinese medicine, daily activity and psychological status. OBJECTIVE: To analyze the outcome assessments of the cases of stroke convalescence measured with different criteria consisting of various dimensions by a cross-sectional investigation of the condition of stroke convalescent patients. DESIGN: Scale evaluation. SETTING: Departments of Clinical Epidemiology Exploratory Development and Neurology, the Second Affiliated Hospital of Guangzhou University of Traditional Chinese Medicine; National Center for Training of Design, Measurement and Evaluation in Clinical Research,Guangzhou University of Traditional Chinese Medicine. PARTICIPANTS: A total of 194 stroke convalescent patients treated in the Second Affiliated Hospital of Guangzhou University of Traditional Chinese Medicine from July 26, 2000 to February 28, 2001 were taken as subjects of the study. There were 126 males and 68 females aged from 40 to 89 years, and the illness course ranged from 14 to 181 days. All patients met diagnosis-treatment criteria of stroke (the second version)[DTCS(V2.0)] and various kinds of diagnostic points of cerebrovascular diseases; moreover, all patients provided confirmed consents. METHODS: They were assessed by assessment methods including the following assessment instruments: DTCS(V2.0), self-designed scale of traditional Chinese medicine (TCM) symptoms (28 symptoms and physical signs were scored as 0, 1, 2 marks from none to severity), modified Edinburgh-Scandinavia stroke scale (a total of 45 marks, 0 to 15 marks as mild defect, 16 to 30 as moderate defect, 31 to 45 as severe defect), modified Barthel activities of daily life (ADL) index (a total of 100 marks, less than 60 marks as unable self-care), vitality and mental health (subscales derived from Health Survey Questionnaire, SF-36). The collected data from scales and inter-scale correlation were processed by the statistic methods mainly including descriptive analysis, Spearmen correlation analysis, factor analysis, etc. MAIN OUTCOME MEASURES: ① Average scores of scales and criteria; ② correlation between modified Edinburgh-Scandinavia stroke scale and other scales. RESULTS: All of the patients completed the assessment, and analyzed in the final analysis. ① The average scores of the scales and criteria: The average scores of DTCS(V2.0), self-designed scale of TCM symptoms, modified Edinburgh-Scandinavia stroke scale, modified Barthel ADL index, vitality and mental health scales were 6.51±6.29, 13.73±6.97, 7.56±7.35, 63.58±23.68, 52.79±23.32 and 62.83±22.75 respectively. ② Correlation between modified Edinburgh-Scandinavia stroke scale and other scales: The Spearman correlation coefficients (R ’) of modified Edinburgh-Scandinavia stroke scale with diagnosis-treatment criteria of stroke, scales of TCM symptoms, modified Barthel ADL index, vitality scale and mental health scale were 20.885, 0.302, -0.824, -0.294 and -0.258 respectively. CONCLUSION: The modified Edinburgh-Scandinavia stroke scale and DTCS(V2.0) shared the same assessment dimension, so they can be mutually alternated in some clinical practices. Discrepancy in measurements of health status was gained due to the diverse dimensions applied in outcome assessments. It is necessary to build up a multi-dimensional assessment criteria system, such as signs and symptoms, daily activities and psychological status, for assessing the stroke convalescent cases in a more comprehensive scope and reflecting the efficacy of TCM treatment scientifically.展开更多
Aiming at the problem of mobile data traffic surge in 5G networks,this paper proposes an effective solution combining massive multiple-input multiple-output techniques with Ultra-Dense Network(UDN)and focuses on solvi...Aiming at the problem of mobile data traffic surge in 5G networks,this paper proposes an effective solution combining massive multiple-input multiple-output techniques with Ultra-Dense Network(UDN)and focuses on solving the resulting challenge of increased energy consumption.A base station control algorithm based on Multi-Agent Proximity Policy Optimization(MAPPO)is designed.In the constructed 5G UDN model,each base station is considered as an agent,and the MAPPO algorithm enables inter-base station collaboration and interference management to optimize the network performance.To reduce the extra power consumption due to frequent sleep mode switching of base stations,a sleep mode switching decision algorithm is proposed.The algorithm reduces unnecessary power consumption by evaluating the network state similarity and intelligently adjusting the agent’s action strategy.Simulation results show that the proposed algorithm reduces the power consumption by 24.61% compared to the no-sleep strategy and further reduces the power consumption by 5.36% compared to the traditional MAPPO algorithm under the premise of guaranteeing the quality of service of users.展开更多
GaN-based irregular multiple quantum well （IMQW） structures assembled two different types of QWs emitting complementary wavelengths for dichromatic white light-emitting diodes （LEDs） are optimized in order to obta...GaN-based irregular multiple quantum well （IMQW） structures assembled two different types of QWs emitting complementary wavelengths for dichromatic white light-emitting diodes （LEDs） are optimized in order to obtain near white light emissions. The hole distributions and spontaneous emission spectra of the IMQW structures are analysed in detail by fully considering the effects of strain, well-coupling, valence band-mixing and polarization effect through employing a newly developed theoretical model from the k. p theory. Several structure parameters such as well material component, well width, layout of the wells and the thickness of harrier between different types of QWs are employed to analyse how these parameters together with the polarization effect influence the electronic and the optical properties of IMQW structure. Numerical results show that uniform hole distributions in different types of QWs are obtained when the number of the QWs emitting blue light is two, the number of the QWs emitting yellow light is one and the barrier between different types of QWs is 8nm in thickness. The near white light emission is realized using GaN-based IMQW structure with appropriate design parameters and injection level.展开更多
This article concerns a coupled LMIs approach to delay-dependent observer-based output feedback stabilizing controller design for linear continuous-time systems with multiple state delays. The advantage of our propose...This article concerns a coupled LMIs approach to delay-dependent observer-based output feedback stabilizing controller design for linear continuous-time systems with multiple state delays. The advantage of our proposed delay-dependent coupled LMIs criterion lies in that: ( 1 ) it can optimize one of multiple time delays with others selected properly, and at the same time, the feedback-gain and observer-gain can be obtained, respectively. (2) it is less conservative than the existing delay-independent ones in the literature. Algorithm to solve the coupled LMIs is also given. Numerical examples illustrate the effectiveness of our method. Keywords Delay-dependent criterion - Time-delay system - Multiple time-delay - Observer-based controller - Linear matrixinequality (LMI)展开更多
To resist the side chaimel attacks of elliptic curve cryptography, a new fast and secure point multiplication algorithm is proposed. The algorithm is based on a particular kind of addition chains involving only additi...To resist the side chaimel attacks of elliptic curve cryptography, a new fast and secure point multiplication algorithm is proposed. The algorithm is based on a particular kind of addition chains involving only additions, providing a natural protection against side channel attacks. Moreover, the new addition formulae that take into account the specific structure of those chains making point multiplication very efficient are proposed. The point multiplication algorithm only needs 1 719 multiplications for the SAC260 of 160-bit integers. For chains of length from 280 to 260, the proposed method outperforms all the previous methods with a gain of 26% to 31% over double-and add, 16% to22% over NAF, 7% to 13% over4-NAF and 1% to 8% over the present best algorithm--double-base chain.展开更多
Current structural analysis software programs offer few if any applicable device-specifi c hysteresis rules or nonlinear elements to simulate the precise mechanical behavior of a multiple friction pendulum system(MFPS...Current structural analysis software programs offer few if any applicable device-specifi c hysteresis rules or nonlinear elements to simulate the precise mechanical behavior of a multiple friction pendulum system(MFPS) with numerous sliding interfaces.Based on the concept of subsystems,an equivalent series system that adopts existing nonlinear elements with parameters systematically calculated and mathematically proven through rigorous derivations is proposed.The aim is to simulate the characteristics of sliding motions for an MFPS isolation system with numerous concave sliding interfaces without prior knowledge of detailed information on the mobilized forces at various sliding stages.An MFPS with numerous concave sliding interfaces and one articulated or rigid slider located between these interfaces is divided into two subsystems: the fi rst represents the concave sliding interfaces above the slider,and the second represents those below the slider.The equivalent series system for the entire system is then obtained by connecting those for each subsystem in series.The equivalent series system is validated by comparing numerical results for an MFPS with four sliding interfaces obtained from the proposed method with those from a previous study by Fenz and Constantinou.Furthermore,these numerical results demonstrate that an MFPS isolator with numerous concave sliding interfaces,which may have any number of sliding interfaces,is a good isolation device to protect structures from earthquake damage through appropriate designs with controllable mechanisms.展开更多
A neighbour-based coordination scheme is proposed for a multi-agent system with multiple leaders. Under assumptions of the connectivity of the interconnection topology and a simple first-order dynamics model for each ...A neighbour-based coordination scheme is proposed for a multi-agent system with multiple leaders. Under assumptions of the connectivity of the interconnection topology and a simple first-order dynamics model for each mobile agent, the results show that all the agents will flock to the polytope region formed by the leaders.展开更多
The current AASHTO load and resistance factor design （LRFD） guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the...The current AASHTO load and resistance factor design （LRFD） guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability. This is a major advancement in bridge design specifications. However, LRFD is only calibrated for dead and live loads. In cases when extreme loads are significant, they need to be individually assessed. Combining regular loads with extreme loads has been a major challenge, mainly because the extreme loads are time variables and cannot be directly combined with time invariant loads to formulate the probability of structural failure. To overcome these difficulties, this paper suggests a methodology of comprehensive reliability, by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant. Based on these conditions, the extreme loads （also referred to as multiple hazard or MH loads） can be broken down into single effects. In Part II of this paper, a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example. There are three major steps in establishing load factors from MH load distributions： （1） formulate the failure probabilities; （2） normalize various load distributions; and （3） establish design limit state equations. This paper describes the formulation of the failure probabilities of single and combined loads.展开更多
基金Supported by the National Natural Science Foundation of China(61103194)
文摘Identity-based key agreement protocol affords a natural way to combine the participant＇s identity with its public key. However, most of them just consider the key agreement in a single private key generator （PKG） environment. In addition, the existing key agreement protocols have a great computing overhead for mobile computing which is more and more popular today. This paper proposes a new identity based key agreement protocol. With the help of mathematical tools, we make our protocol applied in multiple PKG environment. It also satisfies all the security properties which is set for key agreement protocol. Moreover, some of its time-consuming operations can be delivered to untrusted public computation resources, so its computing complexity can be greatly reduced.
基金supported by National Basic Research Program of China (No.2010CB731800)
文摘Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark cannot be seen. The use of multiple marks can solve this problem. However, the extra process to design and identify different marks will significantly increase system complexity. In this paper, a novel vision-based locating method is proposed by using marks with feature points arranged in a radial shape. The feature points of the marks consist of inner points and outer points. The positions of the inner points are the same in all marks, while the positions of the outer points are different in different marks. Unlike traditional camera locating methods （the PnP methods）, the proposed method can calculate the camera location and the positions of the outer points simultaneously. Then the calculation results of the positions of the outer points are used to identify the mark. This method can make navigation with multiple marks more efficient. Simulations and real world experiments are carried out, and their results show that the proposed method is fast, accurate and robust to noise.
文摘Water-related hazards, such as river floods, flash floods and droughts, are becoming more frequent in the Upper Chao Phraya River Basin, Thailand, due to climate change and urbanization, causing significant societal, economic, and environmental damage. This study supports decision-making for nature-based solutions (NBS) to address mitigate these hazards. Using multi-criteria decision analysis, simulation modeling, and spatial analysis, the study identified precipitation and river discharges as key hazard drivers. Mapping hazard severity at various scales, the findings suggest that expanding green areas and water storage can enhance water management and reduce hazard impacts. This research offers critical insights for NBS adoption in water-related risk reduction.
基金Project supported by the National Key R&D Program of China(Grant Nos.2016YFB0400803 and 2016YFB0401801)the National Natural Science Foundation of China(Grant Nos.61674138,61674139,61604145,61574135,61574134,61474142,61474110,61377020,and 61376089)+1 种基金the Science Challenge Project,China(Grant No.TZ2016003)the Beijing Municipal Science and Technology Project,China(Grant No.Z161100002116037)
文摘The upper waveguide （UWG） has direct influences on the optical and electrical characteristics of the violet laser diode （LD） by changing the optical field distribution or barrier of the electron blocking layer （EBL）. In this study, a series of InGaN-based violet LDs with different UWGs are investigated systematically with LASTIP software. It is found that the output light power （OLP） under an injecting current of 120 mA or the threshold current （Ith） is deteriorated when the UWG is u-In0.02Ga0.98N/GaN or u-In0.02Ga0.98N/AlxGa1-xN （0 ≤ x ≤ 0.1）, which should be attributed to small optical confinement factor （OCF） or severe electron leakage. Therefore, a new violet LD structure with u-In0.02Ga0.98N/GaN/Al0.05Ga0.95N multiple layer UWG is proposed to reduce the optical loss and increase the barrier of EBL. Finally, the output light power under an injecting current of 120 mA is improved to 176.4 mW.
基金supported by the National Natural Science Foundation of China(61401475)
文摘The key challenge of the extended target probability hypothesis density (ET-PHD) filter is to reduce the computational complexity by using a subset to approximate the full set of partitions. In this paper, the influence for the tracking results of different partitions is analyzed, and the form of the most informative partition is obtained. Then, a fast density peak-based clustering (FDPC) partitioning algorithm is applied to the measurement set partitioning. Since only one partition of the measurement set is used, the ET-PHD filter based on FDPC partitioning has lower computational complexity than the other ET-PHD filters. As FDPC partitioning is able to remove the spatially close clutter-generated measurements, the ET-PHD filter based on FDPC partitioning has good tracking performance in the scenario with more clutter-generated measurements. The simulation results show that the proposed algorithm can get the most informative partition and obviously reduce computational burden without losing tracking performance. As the number of clutter-generated measurements increased, the ET-PHD filter based on FDPC partitioning has better tracking performance than other ET-PHD filters. The FDPC algorithm will play an important role in the engineering realization of the multiple extended target tracking filter.
文摘After tempering treatment at different conditions, the tempering stability of Fe-base hardfacing layer containing RE and multiple alloying was investigated. The results show that after heat preservation at 560 ℃ and tempering for 4 h the hardness value of Fe-base hardfacing layer containing RE and multiple alloying can reach HRC57; By repeatedly heating circle 700 ℃17 ℃ for 150 times, the hardness value of Fe-base hardfacing layer can reach HRC43, tempering stability is higher and causes the secondary hardening phenomenon. Reasons for higher tempering stability of Fe-base hardfacing layer were analyzed by means of metallographic, XRD, TEM and EDS.
文摘Agent based simulation has successfully been applied to model complex organizational behavior and to improve or optimize aspects of organizational performance. Agents, with intelligence supported through the application of a genetic algorithm are proposed as a means of optimizing the performance of the system being modeled. Local decisions made by agents and other system variables are placed in the genetic encoding. This allows local agents to positively impact high level system performance. A simple, but non trivial, peg game is utilized to introduce the concept. A multiple objective bin packing problem is then solved to demonstrate the potential of the approach in meeting a number of high level goals. The methodology allows not only for a systems level optimization, but also provides data which can be analyzed to determine what constitutes effective agent behavior.
基金Supported by Inner Mongolia Natural Science Foundation(200711020112)Innovation Fundation of Inner Mongolia University of Science and Technology (2009NC064)~~
文摘Based on protein-DNA complex crystal structural data in up-to-date Nucleic Acid Database,the related parameters of DNA Kinetic Structure were investigated by Monte-Carlo Multiple Integrals on the base of modified DNA structure statistical mechanical model,and time complexity and precision were analyzed on the calculated results.
基金the grants from National Tackle Key Science and Technology Program sduring the Ninth Five-Year Plan Period, No.96-903-01-11the grants from State Administration of Traditional Chinese Medicine of People's Republic of China,No.00-01LP16
文摘BACKGROUND: Convalescence is an important stage of stroke treatment. A lot of patients have somatic and mental disorders at various degrees. The primary standard can only reflect partial conditions of somatic disorder; in addition, multiple dimensions of patients at the phase of stroke convalescence are further observed by using a lot of standards, such as signs and symptoms of traditional Chinese medicine, daily activity and psychological status. OBJECTIVE: To analyze the outcome assessments of the cases of stroke convalescence measured with different criteria consisting of various dimensions by a cross-sectional investigation of the condition of stroke convalescent patients. DESIGN: Scale evaluation. SETTING: Departments of Clinical Epidemiology Exploratory Development and Neurology, the Second Affiliated Hospital of Guangzhou University of Traditional Chinese Medicine; National Center for Training of Design, Measurement and Evaluation in Clinical Research,Guangzhou University of Traditional Chinese Medicine. PARTICIPANTS: A total of 194 stroke convalescent patients treated in the Second Affiliated Hospital of Guangzhou University of Traditional Chinese Medicine from July 26, 2000 to February 28, 2001 were taken as subjects of the study. There were 126 males and 68 females aged from 40 to 89 years, and the illness course ranged from 14 to 181 days. All patients met diagnosis-treatment criteria of stroke (the second version)[DTCS(V2.0)] and various kinds of diagnostic points of cerebrovascular diseases; moreover, all patients provided confirmed consents. METHODS: They were assessed by assessment methods including the following assessment instruments: DTCS(V2.0), self-designed scale of traditional Chinese medicine (TCM) symptoms (28 symptoms and physical signs were scored as 0, 1, 2 marks from none to severity), modified Edinburgh-Scandinavia stroke scale (a total of 45 marks, 0 to 15 marks as mild defect, 16 to 30 as moderate defect, 31 to 45 as severe defect), modified Barthel activities of daily life (ADL) index (a total of 100 marks, less than 60 marks as unable self-care), vitality and mental health (subscales derived from Health Survey Questionnaire, SF-36). The collected data from scales and inter-scale correlation were processed by the statistic methods mainly including descriptive analysis, Spearmen correlation analysis, factor analysis, etc. MAIN OUTCOME MEASURES: ① Average scores of scales and criteria; ② correlation between modified Edinburgh-Scandinavia stroke scale and other scales. RESULTS: All of the patients completed the assessment, and analyzed in the final analysis. ① The average scores of the scales and criteria: The average scores of DTCS(V2.0), self-designed scale of TCM symptoms, modified Edinburgh-Scandinavia stroke scale, modified Barthel ADL index, vitality and mental health scales were 6.51±6.29, 13.73±6.97, 7.56±7.35, 63.58±23.68, 52.79±23.32 and 62.83±22.75 respectively. ② Correlation between modified Edinburgh-Scandinavia stroke scale and other scales: The Spearman correlation coefficients (R ’) of modified Edinburgh-Scandinavia stroke scale with diagnosis-treatment criteria of stroke, scales of TCM symptoms, modified Barthel ADL index, vitality scale and mental health scale were 20.885, 0.302, -0.824, -0.294 and -0.258 respectively. CONCLUSION: The modified Edinburgh-Scandinavia stroke scale and DTCS(V2.0) shared the same assessment dimension, so they can be mutually alternated in some clinical practices. Discrepancy in measurements of health status was gained due to the diverse dimensions applied in outcome assessments. It is necessary to build up a multi-dimensional assessment criteria system, such as signs and symptoms, daily activities and psychological status, for assessing the stroke convalescent cases in a more comprehensive scope and reflecting the efficacy of TCM treatment scientifically.
基金supported by National Natural Science Foundation of China(62271096,U20A20157)Natural Science Foundation of Chongqing,China(CSTB2023NSCQ-LZX0134)+3 种基金University Innovation Research Group of Chongqing(CXQT20017)Youth Innovation Group Support Program of ICE Discipline of CQUPT(SCIE-QN-2022-04)the Science and Technology Research Program of Chongqing Municipal Education Commission(KJQN202300632)the Chongqing Postdoctoral Special Funding Project(2022CQBSHTB2057).
文摘Aiming at the problem of mobile data traffic surge in 5G networks,this paper proposes an effective solution combining massive multiple-input multiple-output techniques with Ultra-Dense Network(UDN)and focuses on solving the resulting challenge of increased energy consumption.A base station control algorithm based on Multi-Agent Proximity Policy Optimization(MAPPO)is designed.In the constructed 5G UDN model,each base station is considered as an agent,and the MAPPO algorithm enables inter-base station collaboration and interference management to optimize the network performance.To reduce the extra power consumption due to frequent sleep mode switching of base stations,a sleep mode switching decision algorithm is proposed.The algorithm reduces unnecessary power consumption by evaluating the network state similarity and intelligently adjusting the agent’s action strategy.Simulation results show that the proposed algorithm reduces the power consumption by 24.61% compared to the no-sleep strategy and further reduces the power consumption by 5.36% compared to the traditional MAPPO algorithm under the premise of guaranteeing the quality of service of users.
基金supported by the National Natural Science Foundation of China (Grant No. 60777013)the Nature Science Foundation of Beijing,China (Grant No. 4082023)the Excellent Doctoral Science and Technology Innovation Foundation of Beijing Jiaotong University,China (Grant No. 141063522)
文摘GaN-based irregular multiple quantum well （IMQW） structures assembled two different types of QWs emitting complementary wavelengths for dichromatic white light-emitting diodes （LEDs） are optimized in order to obtain near white light emissions. The hole distributions and spontaneous emission spectra of the IMQW structures are analysed in detail by fully considering the effects of strain, well-coupling, valence band-mixing and polarization effect through employing a newly developed theoretical model from the k. p theory. Several structure parameters such as well material component, well width, layout of the wells and the thickness of harrier between different types of QWs are employed to analyse how these parameters together with the polarization effect influence the electronic and the optical properties of IMQW structure. Numerical results show that uniform hole distributions in different types of QWs are obtained when the number of the QWs emitting blue light is two, the number of the QWs emitting yellow light is one and the barrier between different types of QWs is 8nm in thickness. The near white light emission is realized using GaN-based IMQW structure with appropriate design parameters and injection level.
文摘This article concerns a coupled LMIs approach to delay-dependent observer-based output feedback stabilizing controller design for linear continuous-time systems with multiple state delays. The advantage of our proposed delay-dependent coupled LMIs criterion lies in that: ( 1 ) it can optimize one of multiple time delays with others selected properly, and at the same time, the feedback-gain and observer-gain can be obtained, respectively. (2) it is less conservative than the existing delay-independent ones in the literature. Algorithm to solve the coupled LMIs is also given. Numerical examples illustrate the effectiveness of our method. Keywords Delay-dependent criterion - Time-delay system - Multiple time-delay - Observer-based controller - Linear matrixinequality (LMI)
基金The National Natural Science Foundation of China (No.60473029,60673072).
文摘To resist the side chaimel attacks of elliptic curve cryptography, a new fast and secure point multiplication algorithm is proposed. The algorithm is based on a particular kind of addition chains involving only additions, providing a natural protection against side channel attacks. Moreover, the new addition formulae that take into account the specific structure of those chains making point multiplication very efficient are proposed. The point multiplication algorithm only needs 1 719 multiplications for the SAC260 of 160-bit integers. For chains of length from 280 to 260, the proposed method outperforms all the previous methods with a gain of 26% to 31% over double-and add, 16% to22% over NAF, 7% to 13% over4-NAF and 1% to 8% over the present best algorithm--double-base chain.
文摘Current structural analysis software programs offer few if any applicable device-specifi c hysteresis rules or nonlinear elements to simulate the precise mechanical behavior of a multiple friction pendulum system(MFPS) with numerous sliding interfaces.Based on the concept of subsystems,an equivalent series system that adopts existing nonlinear elements with parameters systematically calculated and mathematically proven through rigorous derivations is proposed.The aim is to simulate the characteristics of sliding motions for an MFPS isolation system with numerous concave sliding interfaces without prior knowledge of detailed information on the mobilized forces at various sliding stages.An MFPS with numerous concave sliding interfaces and one articulated or rigid slider located between these interfaces is divided into two subsystems: the fi rst represents the concave sliding interfaces above the slider,and the second represents those below the slider.The equivalent series system for the entire system is then obtained by connecting those for each subsystem in series.The equivalent series system is validated by comparing numerical results for an MFPS with four sliding interfaces obtained from the proposed method with those from a previous study by Fenz and Constantinou.Furthermore,these numerical results demonstrate that an MFPS isolator with numerous concave sliding interfaces,which may have any number of sliding interfaces,is a good isolation device to protect structures from earthquake damage through appropriate designs with controllable mechanisms.
文摘A neighbour-based coordination scheme is proposed for a multi-agent system with multiple leaders. Under assumptions of the connectivity of the interconnection topology and a simple first-order dynamics model for each mobile agent, the results show that all the agents will flock to the polytope region formed by the leaders.
基金Federal Highway Administration at the University at Buffalo Under Contract Number DTFH61-08-C-00012
文摘The current AASHTO load and resistance factor design （LRFD） guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability. This is a major advancement in bridge design specifications. However, LRFD is only calibrated for dead and live loads. In cases when extreme loads are significant, they need to be individually assessed. Combining regular loads with extreme loads has been a major challenge, mainly because the extreme loads are time variables and cannot be directly combined with time invariant loads to formulate the probability of structural failure. To overcome these difficulties, this paper suggests a methodology of comprehensive reliability, by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant. Based on these conditions, the extreme loads （also referred to as multiple hazard or MH loads） can be broken down into single effects. In Part II of this paper, a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example. There are three major steps in establishing load factors from MH load distributions： （1） formulate the failure probabilities; （2） normalize various load distributions; and （3） establish design limit state equations. This paper describes the formulation of the failure probabilities of single and combined loads.
