The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing te...The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing technology,which is expected to achieve effective vertical stimulation and commingled production across multiple pay zones.Under different geological and engineering conditions,the vertical propagation behavior of hydraulic fractures guided by radial boreholes can be determined by adjusting the interlayered lithologies and radial borehole configurations in experimental samples.Experimental results reveal four fracture network patterns:passivated,cross-layer,skip-layer,and hybrid fractures in the radial borehole fracturing.The radial boreholes perform better fracture guiding performances in the high-brittleness interlayers,which form cross-layer and hybrid fracture networks to improve the growth height.Hydraulic fractures tend to propagate from high-strength to low-strength layers under radial borehole guidance.When radial boreholes interconnect multiple lithology layers,hydraulic fractures initiate preferentially in lower-strength zones rather than remaining confined to borehole root ends.Increased radial borehole length and diameter facilitate fracture skip-layer initiation and cross-layer propagation,while multiple borehole branches enhance fracture penetration across high-strength interlayers.Radial boreholes with inclination angles below 30°enhance fracture height by generating cross-layer and hybrid fracture networks.Furthermore,an inter-borehole phase angle of less than 180°facilitates single-wing fracture cross-layer propagation.Fracture height is primarily governed by radial borehole length,followed by quantity,inclination angle,and diameter.Based on the geometric similarity criteria,the recommended parameters for radial borehole-assisted fracturing in a 5 1/2-inch horizontal well include a length>15 m,an inclination angle<30°,and a diameter>52 mm to ensure effective stimulation across three or more pay zones.Finally,the field-scale numerical model was developed to simulate the optimized radial borehole fracturing and demonstrate the technical superiority.These findings are expected to provide an in-depth understanding of the effective stimulation in multilayered reservoirs.展开更多
Permeable electronics promise improved physiological comfort,but remain constrained by limited functional integration and poor mechanical robustness.Here,we report a three-dimensional(3D)permeable electronic system th...Permeable electronics promise improved physiological comfort,but remain constrained by limited functional integration and poor mechanical robustness.Here,we report a three-dimensional(3D)permeable electronic system that overcomes these challenges by combining electrospun SEBS nanofiber mats,high-resolution liquid metal conductors patterned via thermal imprinting(50μm),and a strain isolators(SIL)that protects vertical interconnects(VIAs)from stress concentration.This architecture achieves ultrahigh air permeability(>5.09 m L cm^(-2)min^(-1)),exceptional stretchability(750%fracture strain),and reliable conductivity maintained through more than 32,500 strain cycles.Leveraging these advances,we have integrated multilayer circuits,strain sensors,and a three-axis accelerometer to achieve a fully integrated,stretchable,permeable wireless real-time gesture recognition glove.The system enables accurate sign language interpretation(98%)and seamless robotic hand control,demonstrating its potential for assistive technologies.By uniting comfort,durability,and high-density integration,this work establishes a versatile platform for nextgeneration wearable electronics and interactive human-robot interfaces.展开更多
Lightweight,high-strength,and heat-resistant protective structures have consistently been crucial for applications in extreme environments,such as aerospace,semiconductors,and nuclear power industries.Multilayered TC4...Lightweight,high-strength,and heat-resistant protective structures have consistently been crucial for applications in extreme environments,such as aerospace,semiconductors,and nuclear power industries.Multilayered TC4/TB8 titanium(Ti)laminates,inspired by theheterostructures of natural biological shells,were fabricated using a hybrid diffusion bonding-hot rolling process followed by an aging treatment,resulting in an architected micro structure.The laminate achieves an ultra-high yield stress of 1020 MPa and proper uniform elongation of 4.2%at 500℃.The TB8 layers with high-density nano-precipitates and dislocations act as hard zone,contributing to high strength.The TC4 layers,with their bimodal structure consisting of coarse and fine grains characterized by equiaxed and lamellar structures,experience more plastic strain than the TB8 layers.The hetero deformation associated with the detwinning ofαgrains in the TC4 layer induces toughening at high temperatures.展开更多
In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formali...In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formalism and dual-variable and position(DVP)method,the general solution of the coupled fields for the Lamb wave is derived,and then the dispersion equation is obtained by the application of the boundary conditions.First,the influence of semiconducting properties on the dispersion behavior of the Lamb wave in a single-layer PSC plate is analyzed.Then,the propagation characteristics of the Lamb wave in a sandwich plate are investigated in detail.The numerical results show that the wave speed and attenuation depend on the stacking sequence,layer thickness,and initial carrier density,the Lamb wave can propagate without a cut-off frequency in both the homogeneous and multilayer PSC plates due to the semiconducting properties,and the Lamb wave without attenuation can be achieved by carefully selecting the semiconductor property in the upper and lower layers.These new features could be very helpful as theoretical guidance for the design and performance optimization of PSC devices.展开更多
This study presents a wireless photovoltaic fault monitoring system integrating an STM32 microcontroller with an Improved Horned Lizard Optimization Algorithm(IHLOA)and a Multi-Layer Perceptron(MLP)neural network.The ...This study presents a wireless photovoltaic fault monitoring system integrating an STM32 microcontroller with an Improved Horned Lizard Optimization Algorithm(IHLOA)and a Multi-Layer Perceptron(MLP)neural network.The IHLOA algorithm introduces three key innovations:(1)chaotic initialization to enhance population diversity and global search capability,(2)adaptive random walk strategies to escape local optima,and(3)a cross-strategy mechanism to accelerate convergence and enhance fault detection accuracy and robustness.The system comprises both hardware and software components.The hardware includes sensors such as the BH1750 light intensity sensor,DS18B20 temperature sensor,and INA226 current and voltage sensor,all interfaced with the STM32F103C8T6 microcontroller and the ESP8266 module for wireless data transmission.The software,developed using QT Creator,incorporates an IHLOA-MLP model for fault diagnosis.The user-friendly interface facilitates intuitive monitoring and scalability for multiple systems.Experimental validation on a PV array demonstrates that the IHLOA-MLP model achieves a fault detection accuracy of 94.55%,which is 2.4%higher than the standard MLP,while reducing variance by 63.64%compared to the standard MLP.This highlights its accuracy and robustness.When compared to other optimization algorithms such as BKA-MLP(94.10%accuracy)and HLOA-MLP(94.00%accuracy),the IHLOA-MLP further reduces variance to 0.08,showcasing its superior performance.The system selects voltage as a feature vector to maintain circuit stability,avoiding efficiency impacts from series current sensors.This combined hardware and software approach further reduces false alarms to 0.1%through a consecutive-judgment mechanism,significantly enhancing practical reliability.This work provides a cost-effective and scalable solution for improving the stability and safety of PV systems in real-world applications.展开更多
The vascular network is integral to the developmental and metabolic processes of various tissues and functions as a systemic circulatory system that also interconnects organs throughout the body.In this study,we descr...The vascular network is integral to the developmental and metabolic processes of various tissues and functions as a systemic circulatory system that also interconnects organs throughout the body.In this study,we describe a multilayered microfluidic organ-on-a-chip platform designed for reproducing various three-dimensional(3D)vascularized microtissue models for biological applications.This platform utilizes a porous membrane as a physical barrier and leverages capillary action for hydrogel self-filling.Its high flow resistance mitigates the risk of gel bursting into the medium channels and facilitates the delivery of substances to generate a wide range of interstitial flow and biochemical factor concentration gradients.This study demonstrated that this platform can be used to accurately replicate 3D microenvironments for vasculogenesis,angiogenesis,and vascularized tumor modeling.We also investigated the critical role of multiple microenvironmental regulations in vascular formation on a chip.Moreover,we reproduced the process of tumor angiogenesis,including primary solid tumor features and the inhibitory effects of antitumor drugs on tumor growth and tumor vasculature before and after angiogenesis.Hence,our multilayered microfluidic platform is valuable for exploring multiple vascular mechanisms and constructing specific microtissues that closely mimic in vivo physiological conditions,providing new strategies for cancer research.Furthermore,the multilayered configuration improves design flexibility and scalability,providing the potential for a multi-organ interconnected platform for high-throughput drug screening.展开更多
Heat transfers at the interface of adjacent saturated soil primarily through the soil particles and the water in the voids.The presence of water induces the contraction of heat flow lines at the interface,leading to t...Heat transfers at the interface of adjacent saturated soil primarily through the soil particles and the water in the voids.The presence of water induces the contraction of heat flow lines at the interface,leading to the emergence of the thermal contact resistance effect.In this paper,four thermal contact models were developed to predict the thermal contact resistance at the interface of multilayered saturated soils.Based on the theory of thermal-hydro-mechanical coupling,semi-analytical solutions of thermal consolidation subjected to time-dependent heating and loading were obtained by employing Laplace transform and its inverse transformation.Thermal consolidation characteristics of multilayered saturated soils under four different thermal contact models were discussed,and the effects of thermal resistance coefficient,partition thermal contact coefficient,and temperature amplitude on the thermal consolidation process were investigated.The outcomes indicate that the general thermal contact model results in the most pronounced thermal gradient at the interface,which can be degenerated to the other three thermal contact models.The perfect thermal contact model overestimates the deformation of the saturated soil during the thermal consolidation.Moreover,the effect of temperature on consolidation properties decreases gradually with increasing interfacial contact thermal resistance.展开更多
Exploiting high-performance absorption-dominant electromagnetic interference(EMI)shielding composites is urgently desired yet challenging for minimizing secondary electromagnetic radiation pollution.Herein,a nickel(Ni...Exploiting high-performance absorption-dominant electromagnetic interference(EMI)shielding composites is urgently desired yet challenging for minimizing secondary electromagnetic radiation pollution.Herein,a nickel(Ni)shell was in-situ grown on a copper nanowires(CuNWs)core to greatly improve the stability of CuNWs,while maintaining excellent electrical conductivity.Afterward,Ni nanowires/Ni@Cu nanowires/graphite paper/waterborne polyurethane(NiNWs/Ni@CuNWs/graphite paper/WPU,n Ni-m Ni@Cu-G)composite foams with the multilayered gradient architectures were fabricated by a facile multi-step freeze-casting method.In the resultant composite foams,the lowly conductive porous NiNWs/WPU layer plays a role as the impedance matching layer,the moderately conductive porous Ni@CuNWs/WPU layer acts as the transition layer,and the highly conductive graphite paper layer serves as the reflection layer.Arising from the rational layout of multilayered gradient magnetic-electrical networks,n Ni-m Ni@Cu-G foam holds the superior averaged total EMI shielding effectiveness(EMI SET)of 75.2 dB and optimal absorption coefficient(A)of 0.93 at the incident direction from NiNWs/WPU layer,suggesting the dominant absorption in EMI shielding mechanism and efficiently alleviating the secondary electromagnetic pollution.Furthermore,n Ni-m Ni@Cu-G foam also exhibits fascinating compressive properties with a compressive strength of 49.3 kPa,which is essential for its practical application.This multilayered gradient architecture design provides valuable insight into high-efficiently constructing absorption-dominant EMI shielding composites.展开更多
When the interface of a multilayered saturated soil is rough with noticeable gaps, heat flow lines converge towards the actual contact points, causing thermal flow contraction. Conversely, in the interface between two...When the interface of a multilayered saturated soil is rough with noticeable gaps, heat flow lines converge towards the actual contact points, causing thermal flow contraction. Conversely, in the interface between two layers of soil with different properties, pore water flows slowly along the pore channels, demonstrating laminar flow phenomenon. To predict the thermal contact resistance and flow contact resistance at the interface, this paper constructs general imperfect thermal contact model and general imperfect flow contact model, respectively. Utilizing a thermo-hydro- mechanical coupling model, the thermal consolidation behavior of multilayered saturated soil under two-dimensional conditions is investigated. Fourier and Laplace transformations are applied to decouple the governing equations, yielding expressions for the temperature increment, pore water pressure, and displacement in multilayered saturated soil. The inverse Fourier-Laplace transformation is then used to obtain numerical solutions, which are compared with degeneration solutions to validate the computational accuracy. The differences in the thermal consolidation process under various thermal contact and flow contact resistance models are discussed. Furthermore, the impact of parameters such as the thermal resistance coefficient, partition thermal contact coefficient, flow contact resistance coefficient, and partition flow contact coefficient on thermal consolidation are investigated. Results indicate that thermal contact resistance creates a relative thermal gradient at the interface, leading to increased pore water pressure and reduced displacement nearby. In contrast, flow contact resistance generates a relative pore pressure gradient at the interface, resulting in increased displacement within the saturated soil with minimal effect on temperature increment distribution.展开更多
The effects of accumulative hot rolling followed by solution treatment on the microstructural evolution and fracture behavior of 30CrMo/316L multilayered composites have been investigated.A scanning electron microscop...The effects of accumulative hot rolling followed by solution treatment on the microstructural evolution and fracture behavior of 30CrMo/316L multilayered composites have been investigated.A scanning electron microscope equipped with an electron backscatter diffraction probe,a laser confocal microscope,an electron probe microanalysis,and a universal testing machine were employed to characterize the microstructures and mechanical properties.The results indicate that solution treatment transformed the microstructure of the 30CrMo layer from ferrite to martensite,while the 316L layer remained austenitic but transitioned from the rolled to the recrystallized state.Additionally,solution treatment significantly enhanced the mechanical properties of the composite,leading to an increase in yield strength and ultimate tensile strength to 744 and 1106 MPa,respectively—258 and 276 MPa higher than those of the hot-rolled plate.The enhancement in strength is primarily attributed to the formation of high-strength martensite in the 30CrMo layer.During deformation,the composite interface effectively impeded crack propagation and induced step-like deflection.However,the formation of cross-layer grains facilitated crack nucleation at grain boundaries,leading to rapid crack propagation and instantaneous fracture.Therefore,preventing the formation of cross-layer grains during the heat treatment process is crucial,as their presence weakens the interfacial strengthening effect of the composite plate.This study provides valuable insights for the design and development of multi-layered steels.展开更多
This study proposes a three-dimensional(3D)coupled magneto-electro-elastic problem for the static analysis of multilayered plates embedding piezomagnetic and piezoelectric layers by considering both sensor and actuato...This study proposes a three-dimensional(3D)coupled magneto-electro-elastic problem for the static analysis of multilayered plates embedding piezomagnetic and piezoelectric layers by considering both sensor and actuator configurations.The 3D governing equations for the magneto-electro-elastic static behavior of plates are explicitly show that are made by the three 3D equilibrium equations,the 3D divergence equation for magnetic induction,and the 3D divergence equation for the electric displacement.The proposed solution involves the exponential matrix in the thickness direction and primary variables’harmonic forms in the in-plane ones.A closed-form solution is performed considering simply-supported boundary conditions.Interlaminar continuity conditions are imposed for displacements,magnetic potential,electric potential,transverse shear/normal stresses,transverse normal magnetic induction and transverse normal electric displacement.Therefore,a layerwise approach is adopted.The results section is composed of an assessment part,where the present model is compared to past 3D electro-elastic or magneto-elastic formulations and a new benchmark part.Benchmarks consider sensor and actuator plate configurations for the fully coupled magneto-electro-elastic cases for different thickness ratios.Tabular and graphical results are presented for displacements,stresses,magnetic potential,electric potential,transverse normal magnetic induction and transverse normal electric displacement.For each presented benchmark,magneto-electro-elastic coupling and thickness and material layer effects are discussed in depth.展开更多
Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity lim...Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.展开更多
In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative ro...In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative rotary shear system(RSS)to address these deficiencies through controlled mandrel rotation and cooling rates.We successfully prepared self-reinforced HDPE pipes with a three-layer structure combining spherical and shish-kebab crystals.Rotational processing aligned the molecular chains in the ring direction and formed shish-kebab crystals.As a result,the annular tensile strength of the rotationally processed three-layer shish-kebab structure(TSK)pipe increased from 26.7 MPa to 76.3 MPa,an enhancement of 185.8%.Notably,while maintaining excellent tensile strength(73.4 MPa),the elongation at break of the spherulite shishkebab spherulite(SKS)tubes was improved to 50.1%,as compared to 33.8%in the case of shish-kebab spherulite shish-kebab(KSK)tubes.This improvement can be attributed to the changes in the micro-morphology and polymer structure within the SKS tubes,specifically due to the formation of small-sized shish-kebab crystals and the low degrees of interlocking.In addition,2D-SAXS analysis revealed that KSK tubes have higher tensile strength due to smaller crystal sizes and larger shish dimensions,forming dense interlocking structures.In contrast,the SKS and TSK tubes had thicker amorphous regions and smaller shish sizes,resulting in reduced interlocking and mechanical performance.展开更多
Intrusion detection systems play a vital role in cyberspace security.In this study,a network intrusion detection method based on the feature selection algorithm(FSA)and a deep learning model is developed using a fusio...Intrusion detection systems play a vital role in cyberspace security.In this study,a network intrusion detection method based on the feature selection algorithm(FSA)and a deep learning model is developed using a fusion of a recursive feature elimination(RFE)algorithm and a bidirectional gated recurrent unit(BGRU).Particularly,the RFE algorithm is employed to select features from high-dimensional data to reduce weak correlations between features and remove redundant features in the numerical feature space.Then,a neural network that combines the BGRU and multilayer perceptron(MLP)is adopted to extract deep intrusion behavior features.Finally,a support vector machine(SVM)classifier is used to classify intrusion behaviors.The proposed model is verified by experiments on the NSL-KDD dataset.The results indicate that the proposed model achieves a 90.25%accuracy and a 97.51%detection rate in binary classification and outperforms other machine learning and deep learning models in intrusion classification.The proposed method can provide new insight into network intrusion detection.展开更多
In recent years,there has been a surge of interest in higher-order topological phases(HOTPs)across various disciplines within the field of physics.These unique phases are characterized by their ability to harbor topol...In recent years,there has been a surge of interest in higher-order topological phases(HOTPs)across various disciplines within the field of physics.These unique phases are characterized by their ability to harbor topological protected boundary states at lower-dimensional boundaries,a distinguishing feature that sets them apart from conventional topological phases and is attributed to the higher-order bulk-boundary correspondence.Two-dimensional(2D)twisted systems offer an optimal platform for investigating HOTPs,owing to their strong controllability and experimental feasibility.Here,we provide a comprehensive overview of the latest research advancements on HOTPs in 2D twisted multilayer systems.We will mainly review the HOTPs in electronic,magnonic,acoustic,photonic and mechanical twisted systems,and finally provide a perspective of this topic.展开更多
基金supported by the National Natural Science Foundation of China(Nos.U24B6001,52421002,52474016,and 52020105001)Research on Key Technologies for Exploration and Development of Dry Geothermal Resources(No.2022DJ5503)Deep-land National Science and Technology Major Project of China(No.2024ZD1003504).
文摘The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing technology,which is expected to achieve effective vertical stimulation and commingled production across multiple pay zones.Under different geological and engineering conditions,the vertical propagation behavior of hydraulic fractures guided by radial boreholes can be determined by adjusting the interlayered lithologies and radial borehole configurations in experimental samples.Experimental results reveal four fracture network patterns:passivated,cross-layer,skip-layer,and hybrid fractures in the radial borehole fracturing.The radial boreholes perform better fracture guiding performances in the high-brittleness interlayers,which form cross-layer and hybrid fracture networks to improve the growth height.Hydraulic fractures tend to propagate from high-strength to low-strength layers under radial borehole guidance.When radial boreholes interconnect multiple lithology layers,hydraulic fractures initiate preferentially in lower-strength zones rather than remaining confined to borehole root ends.Increased radial borehole length and diameter facilitate fracture skip-layer initiation and cross-layer propagation,while multiple borehole branches enhance fracture penetration across high-strength interlayers.Radial boreholes with inclination angles below 30°enhance fracture height by generating cross-layer and hybrid fracture networks.Furthermore,an inter-borehole phase angle of less than 180°facilitates single-wing fracture cross-layer propagation.Fracture height is primarily governed by radial borehole length,followed by quantity,inclination angle,and diameter.Based on the geometric similarity criteria,the recommended parameters for radial borehole-assisted fracturing in a 5 1/2-inch horizontal well include a length>15 m,an inclination angle<30°,and a diameter>52 mm to ensure effective stimulation across three or more pay zones.Finally,the field-scale numerical model was developed to simulate the optimized radial borehole fracturing and demonstrate the technical superiority.These findings are expected to provide an in-depth understanding of the effective stimulation in multilayered reservoirs.
基金supported in part by the National Key R&D Program of China under Grant 2024YFB4405300 and 2022YFA1204300the Natural Science Foundation of Hunan Province under Grant 2023JJ20016+2 种基金the National Natural Science Foundation of China under Grants of 52221001 and 62090035the Key Research and Development Plan of Hunan Province under grants of 2022GK3002 and 2023GK2012the Key Program of Science and Technology Department of Hunan Province under grant of 2020XK2001。
文摘Permeable electronics promise improved physiological comfort,but remain constrained by limited functional integration and poor mechanical robustness.Here,we report a three-dimensional(3D)permeable electronic system that overcomes these challenges by combining electrospun SEBS nanofiber mats,high-resolution liquid metal conductors patterned via thermal imprinting(50μm),and a strain isolators(SIL)that protects vertical interconnects(VIAs)from stress concentration.This architecture achieves ultrahigh air permeability(>5.09 m L cm^(-2)min^(-1)),exceptional stretchability(750%fracture strain),and reliable conductivity maintained through more than 32,500 strain cycles.Leveraging these advances,we have integrated multilayer circuits,strain sensors,and a three-axis accelerometer to achieve a fully integrated,stretchable,permeable wireless real-time gesture recognition glove.The system enables accurate sign language interpretation(98%)and seamless robotic hand control,demonstrating its potential for assistive technologies.By uniting comfort,durability,and high-density integration,this work establishes a versatile platform for nextgeneration wearable electronics and interactive human-robot interfaces.
基金financially supported by the Natural Science Foundation of Changsha,China(No.kq2402015)the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(Nos.NRF-2021R1A2C3006662 and NRF-2022R1A5A1030054)supported by Brain Pool Program through the NRF of Korea,funded by the Ministry of Science and ICT(No.NRF-RS_(2)02300263999)
文摘Lightweight,high-strength,and heat-resistant protective structures have consistently been crucial for applications in extreme environments,such as aerospace,semiconductors,and nuclear power industries.Multilayered TC4/TB8 titanium(Ti)laminates,inspired by theheterostructures of natural biological shells,were fabricated using a hybrid diffusion bonding-hot rolling process followed by an aging treatment,resulting in an architected micro structure.The laminate achieves an ultra-high yield stress of 1020 MPa and proper uniform elongation of 4.2%at 500℃.The TB8 layers with high-density nano-precipitates and dislocations act as hard zone,contributing to high strength.The TC4 layers,with their bimodal structure consisting of coarse and fine grains characterized by equiaxed and lamellar structures,experience more plastic strain than the TB8 layers.The hetero deformation associated with the detwinning ofαgrains in the TC4 layer induces toughening at high temperatures.
基金Project supported by the National Natural Science Foundation of China(Nos.U21A20430 and 12302202)the Hebei Natural Science Foundation of China(No.A2023210040)+1 种基金the Science and Technology Project of Hebei Education Department of China(No.BJ2025005)the Hebei Provincial Department of Human Resources and Social Security of China(No.C20220324)。
文摘In this paper,we theoretically study the Lamb wave in a multilayered piezoelectric semiconductor(PSC)plate,where each layer is an n-type PSC with the symmetry of transverse isotropy.Based on the extended Stroh formalism and dual-variable and position(DVP)method,the general solution of the coupled fields for the Lamb wave is derived,and then the dispersion equation is obtained by the application of the boundary conditions.First,the influence of semiconducting properties on the dispersion behavior of the Lamb wave in a single-layer PSC plate is analyzed.Then,the propagation characteristics of the Lamb wave in a sandwich plate are investigated in detail.The numerical results show that the wave speed and attenuation depend on the stacking sequence,layer thickness,and initial carrier density,the Lamb wave can propagate without a cut-off frequency in both the homogeneous and multilayer PSC plates due to the semiconducting properties,and the Lamb wave without attenuation can be achieved by carefully selecting the semiconductor property in the upper and lower layers.These new features could be very helpful as theoretical guidance for the design and performance optimization of PSC devices.
基金supported by the National Natural Science Foundation of China(12064027,12464010)2022 Jiangxi Province High-level and Highskilled Leading Talent Training Project Selected(No.63)+1 种基金Jiujiang"Xuncheng Talents"(No.JJXC2023032)Jiujiang Natural Science Foundation Project(Key Technologies Research on Autonomous Cruise Solar-Powered UAV-2025-1).
文摘This study presents a wireless photovoltaic fault monitoring system integrating an STM32 microcontroller with an Improved Horned Lizard Optimization Algorithm(IHLOA)and a Multi-Layer Perceptron(MLP)neural network.The IHLOA algorithm introduces three key innovations:(1)chaotic initialization to enhance population diversity and global search capability,(2)adaptive random walk strategies to escape local optima,and(3)a cross-strategy mechanism to accelerate convergence and enhance fault detection accuracy and robustness.The system comprises both hardware and software components.The hardware includes sensors such as the BH1750 light intensity sensor,DS18B20 temperature sensor,and INA226 current and voltage sensor,all interfaced with the STM32F103C8T6 microcontroller and the ESP8266 module for wireless data transmission.The software,developed using QT Creator,incorporates an IHLOA-MLP model for fault diagnosis.The user-friendly interface facilitates intuitive monitoring and scalability for multiple systems.Experimental validation on a PV array demonstrates that the IHLOA-MLP model achieves a fault detection accuracy of 94.55%,which is 2.4%higher than the standard MLP,while reducing variance by 63.64%compared to the standard MLP.This highlights its accuracy and robustness.When compared to other optimization algorithms such as BKA-MLP(94.10%accuracy)and HLOA-MLP(94.00%accuracy),the IHLOA-MLP further reduces variance to 0.08,showcasing its superior performance.The system selects voltage as a feature vector to maintain circuit stability,avoiding efficiency impacts from series current sensors.This combined hardware and software approach further reduces false alarms to 0.1%through a consecutive-judgment mechanism,significantly enhancing practical reliability.This work provides a cost-effective and scalable solution for improving the stability and safety of PV systems in real-world applications.
基金supported by grants from the Interdisciplinary Program of Shanghai Jiao Tong University(No.YG2023LC04)the National Natural Science Foundation of China(Nos.32471473,62231025,and 82171011)+1 种基金the Research Program of Shanghai Science and Technology Committee(Nos.24141900900 and 25JC3201100)Chongqing Natural Science Foundation(No.CSTB2022NSCQ-MSX0767)
文摘The vascular network is integral to the developmental and metabolic processes of various tissues and functions as a systemic circulatory system that also interconnects organs throughout the body.In this study,we describe a multilayered microfluidic organ-on-a-chip platform designed for reproducing various three-dimensional(3D)vascularized microtissue models for biological applications.This platform utilizes a porous membrane as a physical barrier and leverages capillary action for hydrogel self-filling.Its high flow resistance mitigates the risk of gel bursting into the medium channels and facilitates the delivery of substances to generate a wide range of interstitial flow and biochemical factor concentration gradients.This study demonstrated that this platform can be used to accurately replicate 3D microenvironments for vasculogenesis,angiogenesis,and vascularized tumor modeling.We also investigated the critical role of multiple microenvironmental regulations in vascular formation on a chip.Moreover,we reproduced the process of tumor angiogenesis,including primary solid tumor features and the inhibitory effects of antitumor drugs on tumor growth and tumor vasculature before and after angiogenesis.Hence,our multilayered microfluidic platform is valuable for exploring multiple vascular mechanisms and constructing specific microtissues that closely mimic in vivo physiological conditions,providing new strategies for cancer research.Furthermore,the multilayered configuration improves design flexibility and scalability,providing the potential for a multi-organ interconnected platform for high-throughput drug screening.
基金Projects(U24B20113,42477162) supported by the National Natural Science Foundation of ChinaProject(2025C02228) supported by the Primary Research and Development Plan of Zhejiang Province,China。
文摘Heat transfers at the interface of adjacent saturated soil primarily through the soil particles and the water in the voids.The presence of water induces the contraction of heat flow lines at the interface,leading to the emergence of the thermal contact resistance effect.In this paper,four thermal contact models were developed to predict the thermal contact resistance at the interface of multilayered saturated soils.Based on the theory of thermal-hydro-mechanical coupling,semi-analytical solutions of thermal consolidation subjected to time-dependent heating and loading were obtained by employing Laplace transform and its inverse transformation.Thermal consolidation characteristics of multilayered saturated soils under four different thermal contact models were discussed,and the effects of thermal resistance coefficient,partition thermal contact coefficient,and temperature amplitude on the thermal consolidation process were investigated.The outcomes indicate that the general thermal contact model results in the most pronounced thermal gradient at the interface,which can be degenerated to the other three thermal contact models.The perfect thermal contact model overestimates the deformation of the saturated soil during the thermal consolidation.Moreover,the effect of temperature on consolidation properties decreases gradually with increasing interfacial contact thermal resistance.
基金supported by the National Natural Science Foundation of China(Nos.52363004,51963003,and 52263003)Guizhou Provincial Science and Technology Projects(No.ZK[2022]Maj019).
文摘Exploiting high-performance absorption-dominant electromagnetic interference(EMI)shielding composites is urgently desired yet challenging for minimizing secondary electromagnetic radiation pollution.Herein,a nickel(Ni)shell was in-situ grown on a copper nanowires(CuNWs)core to greatly improve the stability of CuNWs,while maintaining excellent electrical conductivity.Afterward,Ni nanowires/Ni@Cu nanowires/graphite paper/waterborne polyurethane(NiNWs/Ni@CuNWs/graphite paper/WPU,n Ni-m Ni@Cu-G)composite foams with the multilayered gradient architectures were fabricated by a facile multi-step freeze-casting method.In the resultant composite foams,the lowly conductive porous NiNWs/WPU layer plays a role as the impedance matching layer,the moderately conductive porous Ni@CuNWs/WPU layer acts as the transition layer,and the highly conductive graphite paper layer serves as the reflection layer.Arising from the rational layout of multilayered gradient magnetic-electrical networks,n Ni-m Ni@Cu-G foam holds the superior averaged total EMI shielding effectiveness(EMI SET)of 75.2 dB and optimal absorption coefficient(A)of 0.93 at the incident direction from NiNWs/WPU layer,suggesting the dominant absorption in EMI shielding mechanism and efficiently alleviating the secondary electromagnetic pollution.Furthermore,n Ni-m Ni@Cu-G foam also exhibits fascinating compressive properties with a compressive strength of 49.3 kPa,which is essential for its practical application.This multilayered gradient architecture design provides valuable insight into high-efficiently constructing absorption-dominant EMI shielding composites.
基金Projects(52108347, 52179112, 52178371) supported by the National Natural Science Foundation of ChinaProjects(2020C01147, 2023C01165) supported by the Primary Research and Development Plan of Zhejiang Province,ChinaProject(LQ22E080010) supported by the Outstanding Youth Project of Natural Science Foundation of Zhejiang Province,China。
文摘When the interface of a multilayered saturated soil is rough with noticeable gaps, heat flow lines converge towards the actual contact points, causing thermal flow contraction. Conversely, in the interface between two layers of soil with different properties, pore water flows slowly along the pore channels, demonstrating laminar flow phenomenon. To predict the thermal contact resistance and flow contact resistance at the interface, this paper constructs general imperfect thermal contact model and general imperfect flow contact model, respectively. Utilizing a thermo-hydro- mechanical coupling model, the thermal consolidation behavior of multilayered saturated soil under two-dimensional conditions is investigated. Fourier and Laplace transformations are applied to decouple the governing equations, yielding expressions for the temperature increment, pore water pressure, and displacement in multilayered saturated soil. The inverse Fourier-Laplace transformation is then used to obtain numerical solutions, which are compared with degeneration solutions to validate the computational accuracy. The differences in the thermal consolidation process under various thermal contact and flow contact resistance models are discussed. Furthermore, the impact of parameters such as the thermal resistance coefficient, partition thermal contact coefficient, flow contact resistance coefficient, and partition flow contact coefficient on thermal consolidation are investigated. Results indicate that thermal contact resistance creates a relative thermal gradient at the interface, leading to increased pore water pressure and reduced displacement nearby. In contrast, flow contact resistance generates a relative pore pressure gradient at the interface, resulting in increased displacement within the saturated soil with minimal effect on temperature increment distribution.
基金supported by the National Key Research and Development Program of China(No.2018YFA0707304).
文摘The effects of accumulative hot rolling followed by solution treatment on the microstructural evolution and fracture behavior of 30CrMo/316L multilayered composites have been investigated.A scanning electron microscope equipped with an electron backscatter diffraction probe,a laser confocal microscope,an electron probe microanalysis,and a universal testing machine were employed to characterize the microstructures and mechanical properties.The results indicate that solution treatment transformed the microstructure of the 30CrMo layer from ferrite to martensite,while the 316L layer remained austenitic but transitioned from the rolled to the recrystallized state.Additionally,solution treatment significantly enhanced the mechanical properties of the composite,leading to an increase in yield strength and ultimate tensile strength to 744 and 1106 MPa,respectively—258 and 276 MPa higher than those of the hot-rolled plate.The enhancement in strength is primarily attributed to the formation of high-strength martensite in the 30CrMo layer.During deformation,the composite interface effectively impeded crack propagation and induced step-like deflection.However,the formation of cross-layer grains facilitated crack nucleation at grain boundaries,leading to rapid crack propagation and instantaneous fracture.Therefore,preventing the formation of cross-layer grains during the heat treatment process is crucial,as their presence weakens the interfacial strengthening effect of the composite plate.This study provides valuable insights for the design and development of multi-layered steels.
文摘This study proposes a three-dimensional(3D)coupled magneto-electro-elastic problem for the static analysis of multilayered plates embedding piezomagnetic and piezoelectric layers by considering both sensor and actuator configurations.The 3D governing equations for the magneto-electro-elastic static behavior of plates are explicitly show that are made by the three 3D equilibrium equations,the 3D divergence equation for magnetic induction,and the 3D divergence equation for the electric displacement.The proposed solution involves the exponential matrix in the thickness direction and primary variables’harmonic forms in the in-plane ones.A closed-form solution is performed considering simply-supported boundary conditions.Interlaminar continuity conditions are imposed for displacements,magnetic potential,electric potential,transverse shear/normal stresses,transverse normal magnetic induction and transverse normal electric displacement.Therefore,a layerwise approach is adopted.The results section is composed of an assessment part,where the present model is compared to past 3D electro-elastic or magneto-elastic formulations and a new benchmark part.Benchmarks consider sensor and actuator plate configurations for the fully coupled magneto-electro-elastic cases for different thickness ratios.Tabular and graphical results are presented for displacements,stresses,magnetic potential,electric potential,transverse normal magnetic induction and transverse normal electric displacement.For each presented benchmark,magneto-electro-elastic coupling and thickness and material layer effects are discussed in depth.
基金financially supported by the National Natural Science Foundation of China(Nos.22302133 and 22405161)Central Guidance on Local Science and Technology Development Fund of Hebei Province,China(No.236Z4406G)+5 种基金the Natural Science Foundation of Hebei Education Department,China(No.BJ2025100)the Natural Science Foundation of Hebei Province,China(No.B2021210001)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2024D01A157)the Key R&D Plan of Karamay(No.2024zdyf0009)Karamay Innovation Environment Construction Plan(Innovative Talents)Project(No.2024hjcxrc0029)the Research Foundation of China University of Petroleum-Beijing at Karamay(No.XQZX20240023)
文摘Tin dioxide(SnO_(2))with a high theoretical specific capacity of 1494 mAh g^(-1)is a promising candidate anode material for lithium storage.However,the shortcomings of serious volume expansion and low conductivity limit its wide application.Herein,coaxial nano-multilayered C/SnO_(2)/TiO_(2)composites were fabricated via layerby-layer self-assembly of TiO_(2)and SnO_(2)-gel layers on the natural cellulose filter paper,followed by thermal treatment under a nitrogen atmosphere.Through engineering design of the assembly process,the optimal C/SinO_(2)/TiO_(2)composite features five alternating SnO_(2)and TiO_(2)nanolayers,with TiO_(2)as the outside shell(denoted as C/TSTST).This unique structure endows the C/TSTST with excellent structural stability and electrochemical kinetics,making it a high-performance anode for lithium-ion batteries(LIBs).The C/TSTST composite delivers a high reversible capacity of 676 mAh g^(-1)at 0.1 A g^(-1)after 200 cycles and retains a capacity of 504 mAh g^(-1)at 1.0 A g^(-1),which can be recovered to 781 mAh g^(-1)at 0.1 A g^(-1)The significantly enhanced electrochemical performance is attributed to the hierarchical hybrid structure,where the carbon core combined with coaxial TiO_(2)nanolayers serves as a structural scaffold,ameliorating volume change of SnO_(2)while creating abundant interfacial defects for enhanced lithium storage and rapid charge transport.These findings are further demonstrated by the density functional theory(DFT)calculations.This work provides an efficient strategy for designing coaxial nano-multilayered transition metal oxide-related electrode materials,offering new insights into high-performance LIBs anodes.
基金supported by the National Natural Science Foundation of China(Nos.52373045 and 52033005).
文摘In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative rotary shear system(RSS)to address these deficiencies through controlled mandrel rotation and cooling rates.We successfully prepared self-reinforced HDPE pipes with a three-layer structure combining spherical and shish-kebab crystals.Rotational processing aligned the molecular chains in the ring direction and formed shish-kebab crystals.As a result,the annular tensile strength of the rotationally processed three-layer shish-kebab structure(TSK)pipe increased from 26.7 MPa to 76.3 MPa,an enhancement of 185.8%.Notably,while maintaining excellent tensile strength(73.4 MPa),the elongation at break of the spherulite shishkebab spherulite(SKS)tubes was improved to 50.1%,as compared to 33.8%in the case of shish-kebab spherulite shish-kebab(KSK)tubes.This improvement can be attributed to the changes in the micro-morphology and polymer structure within the SKS tubes,specifically due to the formation of small-sized shish-kebab crystals and the low degrees of interlocking.In addition,2D-SAXS analysis revealed that KSK tubes have higher tensile strength due to smaller crystal sizes and larger shish dimensions,forming dense interlocking structures.In contrast,the SKS and TSK tubes had thicker amorphous regions and smaller shish sizes,resulting in reduced interlocking and mechanical performance.
基金supported in part by the National Natural Science Foundation of China(No.62001333)the Scientific Research Project of Education Department of Hubei Province(No.D20221702).
文摘Intrusion detection systems play a vital role in cyberspace security.In this study,a network intrusion detection method based on the feature selection algorithm(FSA)and a deep learning model is developed using a fusion of a recursive feature elimination(RFE)algorithm and a bidirectional gated recurrent unit(BGRU).Particularly,the RFE algorithm is employed to select features from high-dimensional data to reduce weak correlations between features and remove redundant features in the numerical feature space.Then,a neural network that combines the BGRU and multilayer perceptron(MLP)is adopted to extract deep intrusion behavior features.Finally,a support vector machine(SVM)classifier is used to classify intrusion behaviors.The proposed model is verified by experiments on the NSL-KDD dataset.The results indicate that the proposed model achieves a 90.25%accuracy and a 97.51%detection rate in binary classification and outperforms other machine learning and deep learning models in intrusion classification.The proposed method can provide new insight into network intrusion detection.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12304539,12074108,12474151,12347101)the Natural Science Foundation of Chongqing(Grant No.CSTB2022NSCQ-MSX0568)Beijing National Laboratory for Condensed Matter Physics(Grant No.2024BNLCMPKF025)。
文摘In recent years,there has been a surge of interest in higher-order topological phases(HOTPs)across various disciplines within the field of physics.These unique phases are characterized by their ability to harbor topological protected boundary states at lower-dimensional boundaries,a distinguishing feature that sets them apart from conventional topological phases and is attributed to the higher-order bulk-boundary correspondence.Two-dimensional(2D)twisted systems offer an optimal platform for investigating HOTPs,owing to their strong controllability and experimental feasibility.Here,we provide a comprehensive overview of the latest research advancements on HOTPs in 2D twisted multilayer systems.We will mainly review the HOTPs in electronic,magnonic,acoustic,photonic and mechanical twisted systems,and finally provide a perspective of this topic.
